| Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Some new Dell models use spare pins on the amp as a binary integer
value to indicate the speaker type. The driver must use this to
select the correct firmware files for the hardware.
Patch #1 is the new support.
The other patches are for KUnit testing.
|
|
Add KUnit test cases for:
- cs35l56_process_xu_properties() which reads the onchip GPIO definitions.
- cs35l56_set_fw_name() calls functions to configure and set the GPIOs.
- cs35l56_set_fw_name() saves the ID value in cs35l56_priv.speaker_id.
- cs35l56_set_fw_name() does not overwrite a speaker ID that was already
found some other way.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add KUnit testing of:
cs35l56_check_and_save_onchip_spkid_gpios()
cs35l56_configure_onchip_spkid_pads()
cs35l56_read_onchip_spkid()
The test consists of:
- A mock regmap that simulates the pad and pin config registers.
- Parameterization of the pin list, pulls list, a simulated value for
each pin and the speaker ID value that this should produce.
- A self-test of the simulated pin and GPIO registers.
- A test that the value returned by cs35l56_read_onchip_spkid() is
correct.
- A test that the pin pull-up/down are set correctly by
cs35l56_configure_onchip_spkid_pads()
- A test that cs35l56_configure_onchip_spkid_pads() and
cs35l56_read_onchip_spkid(0 return the expected values if
cs35l56_base->num_onchip_spkid_gpios == 0.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() saves
the configuration.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal GPIO numbers.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal pull types.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for using the state of pins on the amplifier to indicate
the type of speaker fitted.
Previously, where there were alternate speaker vendors, this was
indicated using host CPU GPIOs.
Some new Dell models use spare pins on the CS35L63 as GPIOs for the
speaker ID detection.
Cirrus-specific SDCA Disco properties provide a list of the pins to be
used, and pull-up/down settings for the pads. This list is ordered,
MSbit to LSbit.
The code to set the firmware filename has been modified to check for
using chip pins for speaker ID. The entire block of code to set
firmware name has been moved out of cs35l56_component_probe() into
its own function to make it easier to KUnit test.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Smatch detects this resource leak:
sound/soc/codecs/cs4271.c:548 cs4271_soc_resume() warn:
'cs4271->clk' from clk_prepare_enable() not released on lines: 540,546.
Instead of direct returns, unprepare the clock and disable regulators on
the error paths.
Fixes: cf6bf51b5325 ("ASoC: cs4271: Add support for the external mclk")
Fixes: 9a397f473657 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260110195337.2522347-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
data structure
TAS2781 driver supports three solutions of calibrated data. The first is
from the driver itself: driver reads the calibrated files directly during
probe; The second is from user space: during init of audio hal, the audio
hal will pass the calibrated data via kcontrol interface. Driver will
store this data in "struct calidata" for use. The third is from UEFI,
mainly used in hda device. These three solutions save the calibrated data
into different data structures. It is time to put them together into
"struct calidata" for use.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20260202102757.532-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds a setting to resolve the intermittent no-sound issue.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20260203084827.768238-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Hsieh Hung-En <hungen3108@gmail.com>:
This series fixes some issues and improves robustness in the es8328
driver.
|
|
Merge series from Chris Morgan <macroalpha82@gmail.com>:
Add support for the Anbernic RG-DS Speaker Amplifiers. The Anbernic
RG-DS uses two AW87391 ICs at 0x58 and 0x5B on i2c2. However, the
manufacturer did not provide a firmware file, only a sequence of
register writes to each device to enable and disable them.
Add support for this *specific* configuration in the AW87390 driver.
Since we are relying on a device specific sequence I am using a
device specific compatible string. This driver does not currently
support the aw87391 for any other device as I have none to test
with valid firmware. Attempts to create firmware with the AwinicSCPv4
have not been successful.
|
|
The wcd-mbhc-v2 driver has unnecessary empty module_init and
module_exit functions. Remove them. Note that if a module_init function
exists, a module_exit function must also exist; otherwise, the module
cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260131020111.46108-1-enelsonmoore@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Handle failures in the resume path by unwinding previously enabled
resources.
If enabling regulators or syncing the regcache fails, disable regulators
and unprepare the clock to avoid leaking resources and leaving the device
in a partially resumed state.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260130160017.2630-6-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the regmap stored in the driver private data when restoring the
register cache on resume, instead of looking it up from the device.
This keeps the resume path consistent with the regmap instance used by
the driver and avoids relying on a separate dev_get_regmap() lookup.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260130160017.2630-5-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check and propagate return values from snd_soc_component_update_bits() in
es8328_set_dai_fmt().
This avoids silent failures when register updates fail and ensures the DAI
format is not left in an inconsistent state.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260130160017.2630-4-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Register writes and updates in set_bias_level() ignored return values,
potentially masking I/O failures during bias level transitions.
Check and propagate errors from component register writes and updates.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260130160017.2630-3-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DAC deemphasis control updated the hardware before updating the cached
state, causing the previous setting to be applied.
Update the cached deemphasis state first and then apply the setting.
Also check and propagate errors from es8328_set_deemph() in hw_params().
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260130160017.2630-2-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for Anbernic's RG-DS audio amplifiers, powered by
Awinic AW87391 amplifier ICs. These chips typically require an
init sequence provided by firmware, but the manufacturer did not
provide firmware in this case. As a result we had to hard-code
the init sequence and use a device specific binding (rather than
a binding just for the aw87391).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20260128174608.1498-3-macroalpha82@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rt5575 driver fails to link when SPI support is in a loadable
module but the codec is built-in:
x86_64-linux-ld: vmlinux.o: in function `rt5575_i2c_probe':
rt5575.c:(.text+0x9792ce): undefined reference to `rt5575_spi_get_device'
rt5575.c:(.text+0x979332): undefined reference to `rt5575_spi_fw_load'
Change the symbol in to a 'bool' and add a dependency that rules
out the broken configuration.
Fixes: 420739112e95 ("ASoC: rt5575: Add the codec driver for the ALC5575")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260202095432.1234133-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The load detection process for 3-pole jacks requires slightly
updated reference values to ensure an accurate result. Update
the code to apply different tunings for the 3-pole and 4-pole
cases. This also updates the thresholds overall so update the
relevant comments to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260130150927.2964664-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
max98390_i2c_probe()
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20260130091904.3426149-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The slot_width can be different with the params_width(), for example,
DSP_A mode, slot_width = 32, but data format is S16_LE, if the word
length is configured to be 16, there is no sound on the right speaker.
So add .set_tdm_slot() callback function to configure the slot_width and
update the word length according to slot_width in hw_params().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260128025955.2562331-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Now, all DAPM users are using function to handling it.
We can capsuling it. This patchset moves struct snd_soc_dapm_context into
soc-dapm.c, and remove un-used functions.
Link: https://lore.kernel.org/r/87zf7jrx52.wl-kuninori.morimoto.gx@renesas.com
|
|
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
The main goal is to convert drivers to use GPIO descriptors. While reading
the code, I think it is time to remove ak4641 and pxa2xx-ac97 driver,
more info could be found in commit log of each patch.
Then only need to convert sound/arm/pxa2xx-ac97-lib.c to use GPIO
descriptors. Not have hardware to test the pxa2xx ac97.
|
|
Since commit d6df7df7ae5a0 ("ARM: pxa: remove unused board files"), there
has been no in-tree user of the AK4641 codec driver. The last user
(HP iPAQ hx4700) was a non-DT PXA board file that instantiated the device
via I2C board data; that code was removed as part of the PXA board-file
purge.
The AK4641 driver was introduced ~2011 and still probes only via the I2C
device-ID table ('.id_table'), without an 'of_match_table', so there are
no upstream Devicetree users to retain. With no in-tree users left, remove
the driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260122-sound-cleanup-v1-1-0a91901609b8@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clk_prepare_enable/clk_disable_unprepare
clk_prepare_enable() and clk_disable_unprepare() already checked NULL
clock parameter.
Remove unneeded NULL check for wm8731->mclk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260126073528.1826406-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Compiler is not happy about used stack frames in a couple of functions:
sound/soc/codecs/rt1320-sdw.c: In function 'rt1320_rae_load':
sound/soc/codecs/rt1320-sdw.c:1570:1: error: the frame size of 1336 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
sound/soc/codecs/rt1320-sdw.c: In function 'rt1320_dspfw_load_code':
sound/soc/codecs/rt1320-sdw.c:1786:1: error: the frame size of 1520 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Refactor the code to fix these.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260124101824.3424793-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_component_get_bias_level() will be removed.
Let's use snd_soc_dapm_get_bias_level() instead.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6mpqgxc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The test must import namespace "EXPORTED_FOR_KUNIT_TESTING".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: d0ab89951197 ("ASoC: cs35l56: Add KUnit testing of cs35l56_set_fw_suffix()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601221843.kS9IMZ0E-lkp@intel.com/
Link: https://patch.msgid.link/20260123111354.1931986-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260123113708.416727-13-bigeasy@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new KUnit test for testing the creation of firmware name
qualifiers in the cs35l56 driver. The initial set of test cases
are for cs35l56_set_fw_suffix().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Kconfig symbol CONFIG_SND_SOC_CS_AMP_LIB_TEST_HOOKS to enable
calling into functions that would normally abort because of missing
EFI functionality. Before this the code paths were only enabled if
the KUnit test for cs-amp-lib was enabled.
This change allows KUnit tests for clients of cs-amp-lib to install
redirection hooks in cs-amp-lib.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds test cases for getting a Dell SSIDExV2 string by calling
cs_amp_devm_get_vendor_specific_variant_id().
This is a fairly simple test harness, the redirected call to
cs_amp_get_efi_variable() returns a test string to simulate
reading a string from UEFI. The returned string should be
the second field in the SSIDExV2 string (if valid).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If cs_amp_devm_get_vendor_specific_variant_id() returns a string, use it
as part of the firmware filename. If this firmware isn't found, fall back
to the standard firmware name.
This re-uses the fwf_suffix fallback mechanism that was introduced in
commit e5d5b3aebdc8 ("ASoC: cs35l56: Use SoundWire address as alternate
firmware suffix on L56 B0").
This is for handling vendors that use the same PCI SSID on systems with
various audio hardware and have a custom vendor-specific way to identify
the hardware variant.
This is currently used on Dell laptops. Dell create a UEFI variable that
indicates varations to the base hardware. This variance can be any part
of the hardware (not necessarily affecting the audio). It would be
impractical to publish many aliases for the same firmware files to match
every possible variance to that base hardware. Hence the fallback to the
standard firmware name. This allows alternate firmware files to be
published only for variants that need it. For all other variants the
fallback will load the firmware for the base SSID.
This is not done for CS35L56 B0 because the fallback mechanism is already
used for a different purpose for these parts. None of the products with
the older L56 B0 silicon revision need the additional vendor-specific
descriptor.
For SoundWire the resulting firmware searches with a variant descriptor
will be:
1. cs35l??-dsp1-misc-SSID-VARIANT-l?u?.wmfw
2. cs35l??-dsp1-misc-SSID-VARIANT.wmfw
3. cs35l??-dsp1-misc-SSID-VARIANT-l?u?.bin
4. cs35l??-dsp1-misc-SSID-VARIANT.bin
If this doesn't find a wmfw and bin file it will then fallback to:
5. cs35l??-dsp1-misc-SSID-l?u?.wmfw
6. cs35l??-dsp1-misc-SSID.wmfw
7. cs35l??-dsp1-misc-SSID-l?u?.bin
8. cs35l??-dsp1-misc-SSID.bin
With the typical published firmware names and qualifiers (a single wmfw but
amp-specific bin file) this will load either:
cs35l??-dsp1-misc-SSID-VARIANT.wmfw
and cs35l??-dsp1-misc-SSID-VARIANT-l?u?.bin
or
cs35l??-dsp1-misc-SSID.wmfw
and cs35l??-dsp1-misc-SSID-l?u?.bin
For non-Soundwire (I2S/TDM) systems the searches and fallbacks are
as above except that the "l?u?" component of the name is instead the
ALSA name prefix, usually of the form "AMPn".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a function cs_amp_devm_get_vendor_specific_variant_id() to return
a vendor-specific hardware identifier string (if there is one) and use
it to fetch an identifier from Dell SSIDExV2 UEFI variable content.
Dell use the same PCI SSID on multiple products that might have different
audio hardware and thus need different firmware for the amplifier DSP.
The SSIDExV2 string contains additional system identifiers, and the
second field is a 2-character audio hardware identifier.
There are older Dell models with Cirrus Logic amplifiers that have the
SSIDExV2 UEFI variable but do not have the 2-character audio ID in the
second field. The SSIDExV2 is ignored if the second field is not
2 characters.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Claudiu <claudiu.beznea@tuxon.dev>:
This series adds cleanups for the Renesas RZ SSI driver.
|
|
Merge series from Binbin Zhou <zhoubinbin@loongson.cn>:
This patchset replaces the original magic numbers with register bit
field macro definitions in an attempt to improve code readability.
In addition, DAPM for capture ADC and chip power has been enabled.
|
|
Currently, there is compilation error when the
CONFIG_PCI is not enabled which is used for creating
firmware name. This commit address this issue by adding
fallback mechanism to construct unqiue name by using
SounWire slave's link and unique ids alone when the
CONFIG_PCI is not available.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601190756.IpoMY5AJ-lkp@intel.com/
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20260120040825.1460-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix the typo "miniumum" -> "minimum" in comments in rt5659, rt5665,
rt5668, and rt5682-i2c codec drivers.
This typo is already listed in scripts/spelling.txt by commit
8c3200265787 ("scripts/spelling.txt: add several more common spelling
mistakes").
Suggested-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Runrun Liu <liurunrun@uniontech.com>
Link: https://patch.msgid.link/3D20FA99934F2891+20260119025302.1288888-1-liurunrun@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove initialization of the chip power register from the
es8323_set_bias_level routine, and add proper DAPM power supply widgets
to DAPM, which really should be handled by the DAPM subsystem.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/db47e56e7c72bb900a84a33ee07d4ffcf0a908a3.1768641428.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add proper DAPM capture ADC widgets to DAPM, which really should be
handled by the DAPM subsystem.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/9d93040f4cea77054e669c50325e080dffa7a7f1.1768641428.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit daf855f76a12 ("ASoC: es8323: enable DAPM power widgets for
playback DAC"), the DAC is handled by the DAPM subsystem.
Remove initialization of the DAC enablement bits from the
es8323_set_bias_level routine
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/d2823ad7ae226a83d49bcb860240c0ddc4080f14.1768641428.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to the manual, add more detailed register bitfield definitions
to replace the magic numbers in the register settings in es8323 codec.
No functional change intended.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/7e8953f2d36a86e9d507d6bb01c72b64846e0829.1768641428.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASP_TX5 was incorrectly mapped to a channel value of 3 corrects,
the channel value of 4.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://patch.msgid.link/20260115192523.1335742-2-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In es8328_hw_params(), the return value of
snd_soc_component_update_bits() was ignored. This could lead to silent
failures where the hardware is left in an inconsistent state if a
regmap write fails.
Check the return value of regmap updates and propagate any errors back
to the ALSA core. Return 0 on success to match the DAI ops convention.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260115161359.41979-1-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge patches that Pengutronix have been carrying in their tree for a
while and were upstreamed by Sascha Hauer together with some new
features that are going into the next release.
|
|
Merge series from Sascha Hauer <s.hauer@pengutronix.de>:
These are some patches for the tlv320adcx140 codec we are carrying
around for a while, time to upstream them.
|
|
The AW88261 needs the DVDD pin to be powered on to start up. Get and
enable the dvdd-supply regulator.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju@machinesoul.in>
Link: https://patch.msgid.link/20260114-aw88261-dvdd-v2-2-ef485b82a7a7@machinesoul.in
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add control for channel summation.
3 modes are supported:
1. "Disabled": Normal operation
2. "2 Channel": Every two channels are summed and divided by 2
Out 1 <- (CH1 + CH2) / 2
Out 2 <- (CH1 + CH2) / 2
Out 3 <- (CH3 + CH4) / 2
Out 4 <- (CH3 + CH4) / 2
3. "4 Channel": Every four channels are summed and divided by 4
Out 1 <- (CH1 + CH2 + CH3 + CH4) / 4
Out 2 <- (CH1 + CH2 + CH3 + CH4) / 4
Out 3 <- (CH1 + CH2 + CH3 + CH4) / 4
Out 4 <- (CH1 + CH2 + CH3 + CH4) / 4
Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-10-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The tlv320adcx140 chips have a configurable amount of biquad filters
enabled per input channel. Currently this number is always left at the
default value of 2 biquads per channel.
This commit adds a kcontrol to allow runtime configuration of the amount
of biquads per channel.
The configuration is controlled by bits [5-6] in the DSP_CFG1 register.
Signed-off-by: Emil-Juhl <juhl.emildahl@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-9-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|