| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
- Refactor page allocation dedicated to 1394 OHCI IR/IT/AR DMA contexts
Although 1394 OHCI specification does not impose any restriction on
the memory size dedicated to these DMA contexts, 1394 OHCI PCI driver
allocates pages for convenience when mapping them into either kernel
space or userspace VMA. The driver previously used dma_alloc_pages()
for both page allocation and mapping creation, even though this
kernel API is rarely used. Following discussions questioning the
page-oriented kernel API in the DMA layer, the driver has been
refactored to avoid using this API. In addition, the use of private
members in the allocated pages has been removed following
long-standing concern.
- Allocate variable-sized buffer for isochronous context header
1394 OHCI PCI driver previously allocated a single page for
isochronous context header. As a result, the buffer size for the
header was fixed to PAGE_SIZE, which imposed a limitation on IEC
61883-1/6 packet streaming engine. Consequently, the ALSA PCM devices
provided by drivers for audio and music units in IEEE 1394 bus were
constrained in the maximum size of buffer period (64 ms in most
cases). This limitation is resolved by dynamically allocating the
header buffer with an arbitrary size.
* tag 'firewire-updates-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire: remove PCM buffer size constraint from isoc context header
firewire: core: add fw_iso_context_create() variant with header storage size
firewire: core: provide isoc header buffer size outside card driver
firewire: ohci: allocate isoc context header by kvmalloc()
firewire: core: add flags member for isochronous context structure
firewire: ohci: use cleanup helper for isoc context header allocation
firewire: ohci: code refactoring to use union for isoc multiple channel state
firewire: ohci: refactor isoc single-channel state using a union
firewire: core: add function variants for isochronous context creation
firewire: ohci: fix index of pages for dma address to 1394 OHCI IT context
firewire: ohci: stop using page private to store DMA mapping address
firewire: ohci: split page allocation from dma mapping
firewire: ohci: use MAX macro to guarantee minimum count of pages for AR contexts
firewire: core: stop using page private to store DMA mapping address
firewire: core: use common kernel API to allocate and release a batch of pages
firewire: core: code refactoring with cleanup function for isoc pages
firewire: core: use mutex instead of spinlock for client isochronous context
firewire: core: move private function declaration from public header to internal header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
|
|
Vendor ID 0x0661 is assigned to Hamamatsu Photonics K.K.,
but is used by iBasso for iBasso DC04U (0x0661:0x0883),
which supports native DSD playback.
This patch adds QUIRK_FLAG_DSD_RAW for iBasso DC04U, enabling
native DSD playback (DSD_U32_BE). The change has been verified
on Arch Linux using mpd and pw-cat.
Signed-off-by: Qihang Guo <v-conet@outlook.com>
Link: https://patch.msgid.link/TYYPR01MB14098529E0BD900921BE6F42CF465A@TYYPR01MB14098.jpnprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Link: https://patch.msgid.link/20260209121212.171430-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Return -EINVAL in case the scontrol contains more data than the amount of
space available for it to store in sof_ipc4_refresh_bytes_control().
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-sound/aYXvFr-LVHVJSvS7@stanley.mountain/
Fixes: 2a28b5240f2b ("ASoC: SOF: ipc4-control: Add support for generic bytes control")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260209120239.6066-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The _hda_dsp_stream_put() function now depends on the
snd_hdac_ext_stream_release() interface from SND_HDA_EXT_CORE:
x86_64-linux-ld: vmlinux.o: in function `_hda_dsp_stream_put':
hda-stream.c:(.text+0xfac605): undefined reference to `snd_hdac_ext_stream_release'
Select this symbol the same way the other users do.
Fixes: 89e1d632bb29 ("ASoC: SOF: Intel: add hda_dsp_stream_pair_get/put helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260209070901.857700-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull 6.19-devel branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add quirk for the Onkyo SE-300PCIE variant with PCI subsystem ID
(160b:0102). This variant (OK0011) was found in the official Windows
driver packages.
Also, reorder entries and fix the indentation to maintain
consistency.
Signed-off-by: Harin Lee <me@harin.net>
Link: https://patch.msgid.link/20260208133001.680550-1-me@harin.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix 'ony' -> 'only' and 'evalute' -> 'evaluate' in code comments.
Signed-off-by: Pedro Amarante <ppedrolia@gmail.com>
Link: https://patch.msgid.link/20260208052439.11498-1-ppedrolia@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute and mic-mute LEDs on HP ENVY x360 Convertible 15-es0xxx
(PCI SSID 103c:88b3) do not work with the current driver.
This model requires a combination of COEFBIT and GPIO fixups to
correctly control the LEDs. Introduce a new fixup function
alc245_fixup_hp_envy_x360_mute_led and add a quirk to apply it.
Signed-off-by: Illia Barbashyn <04baril@gmail.com>
Link: https://patch.msgid.link/20260207221955.24132-1-04baril@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It was reported that we need the same quirk for HP ZBook Studio G4
(SSID 103c:826b) as other HP models to make the mute-LED working.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/64d78753-b9ff-4c64-8920-64d8d31cd20c@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221002
Link: https://patch.msgid.link/20260207131324.2428030-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The dma-coherent property is used to indicate a device is capable of
coherent DMA operations. On i.MX952, one of EDMA devices support such
feature, in order to support the EDMA device, the memory needs to be
allocated from the DMA device.
Make this driver to support both non dma-coherent and dma-coherent dma
engine.
Remove dma coerce_mask_and coherent() because DMA provider already set it
according to its capability.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a compatible string, clock mapping table and enable the option
'start_before_dma' to support ASRC on the i.MX952 platform.
The clock mapping table is to map the clock sources on i.MX952 to the
clock ids in the driver, the clock ids are for all the clock sources on
all supported platforms.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a limitation on i.MX952 that dma request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped
from the input fifo on the second time if dma is triggered before the
client device and EDMA may copy wrong data from output fifo as the output
fifo is not ready in the beginning.
The solution is to trigger asrc before dma on i.MX952, and add delay to
wait output data is generated then start the EDMA for output, otherwise
the m2m function has noise issues.
So add an option to start ASRC first for M2M before ASRC is enabled on
i.MX952.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260206014805.3897764-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No need to assign "uctl" to itself. Delete it.
Fixes: 55f98ece9939 ("ALSA: oss: Relax __free() variable declarations")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aYXvm2YoV2yRimhk@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
I'm currently working on DisplayPort audio support for the Rockchip
RK3588/RK3576 SoCs, which preferrably use S/PDIF as DAI source.
Apparently the upstream Rockchip S/PDIF driver is lacking a couple of
features right now, which are necessary to get things going (i.e.
setting the sysclk from the machine driver). I found the missing bits
in Rockchip's 6.1 BSP kernel and ported them over. This series effectly
brings the mainline kernel on-par with the BSP driver, but also contains
a couple of cleanup patches of my own to bring the driver to the modern
age.
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Some new Dell models use spare pins on the amp as a binary integer
value to indicate the speaker type. The driver must use this to
select the correct firmware files for the hardware.
Patch #1 is the new support.
The other patches are for KUnit testing.
|
|
Convert the driver to use FIELD_PREP to increase readability.
This also fixes an issue that the SDPIF_CFGR_VDW_MASK was wrong,
which didn't have any effects as the only user in the driver
updates the other bits at the same time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-10-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to fill IEC958 channel status information.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-9-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Treat 32 bit sample width as if it was 24 bits using only the
24 most significant bits.
[I've merged the channel-swapping fix from Zohn Ni into Sugar Zhang's
patch introducing the problem in the first place]
Co-developed-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-8-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allow setting the mclk rate from the machine driver.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-7-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCM should be registered before the DAI component, as the second one
triggers snd_soc_try_rebind_card.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-6-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The hardware supports all sample rates up to 192kHz.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-5-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cleanup the probe routine a little bit by using dev_err_probe
instead of dev_err.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-4-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver mixes device managed resources with unmanaged ones
and (as a lot of them do) gets the order wrong resulting in
potential race condition problems at module removal time. Let's
go to full device managed resources to cleanup the code and get
rid of the potential race condition.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-3-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move rk_spdif_match DT compatible table to the usual place before the
platform-driver struct definition and drop the useless of_match_ptr(),
since it is fine to reference the DT id table even when OF support is
disabled (which makes the driver useless anyways).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-2-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use device_get_match_data(), so that the probe routine does not
directly reference the of_match_table. This allows moving the
table at the end of the file where most recent drivers have it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-1-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
imx_rpmsg_probe() calls snd_soc_find_dai() without holding client_mutex.
However, snd_soc_find_dai() has lockdep_assert_held(&client_mutex)
indicating callers must hold this lock, as the function iterates over the
global component list.
All other callers of snd_soc_find_dai() either hold client_mutex via the
snd_soc_bind_card() path or use the snd_soc_find_dai_with_mutex() wrapper.
Use snd_soc_find_dai_with_mutex() instead to fix the missing lock
protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205052429.4046903-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add KUnit test cases for:
- cs35l56_process_xu_properties() which reads the onchip GPIO definitions.
- cs35l56_set_fw_name() calls functions to configure and set the GPIOs.
- cs35l56_set_fw_name() saves the ID value in cs35l56_priv.speaker_id.
- cs35l56_set_fw_name() does not overwrite a speaker ID that was already
found some other way.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add KUnit testing of:
cs35l56_check_and_save_onchip_spkid_gpios()
cs35l56_configure_onchip_spkid_pads()
cs35l56_read_onchip_spkid()
The test consists of:
- A mock regmap that simulates the pad and pin config registers.
- Parameterization of the pin list, pulls list, a simulated value for
each pin and the speaker ID value that this should produce.
- A self-test of the simulated pin and GPIO registers.
- A test that the value returned by cs35l56_read_onchip_spkid() is
correct.
- A test that the pin pull-up/down are set correctly by
cs35l56_configure_onchip_spkid_pads()
- A test that cs35l56_configure_onchip_spkid_pads() and
cs35l56_read_onchip_spkid(0 return the expected values if
cs35l56_base->num_onchip_spkid_gpios == 0.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() saves
the configuration.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal GPIO numbers.
- A test that cs35l56_check_and_save_onchip_spkid_gpios() rejects
illegal pull types.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for using the state of pins on the amplifier to indicate
the type of speaker fitted.
Previously, where there were alternate speaker vendors, this was
indicated using host CPU GPIOs.
Some new Dell models use spare pins on the CS35L63 as GPIOs for the
speaker ID detection.
Cirrus-specific SDCA Disco properties provide a list of the pins to be
used, and pull-up/down settings for the pads. This list is ordered,
MSbit to LSbit.
The code to set the firmware filename has been modified to check for
using chip pins for speaker ID. The entire block of code to set
firmware name has been moved out of cs35l56_component_probe() into
its own function to make it easier to KUnit test.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260205164838.1611295-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add quirk to support microphone input through headphone jack on Acer Nitro 5 AN515-57 (ALC295).
Signed-off-by: Breno Baptista <brenomb07@gmail.com>
Link: https://patch.msgid.link/20260205024341.26694-1-brenomb07@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Smatch detects this resource leak:
sound/soc/codecs/cs4271.c:548 cs4271_soc_resume() warn:
'cs4271->clk' from clk_prepare_enable() not released on lines: 540,546.
Instead of direct returns, unprepare the clock and disable regulators on
the error paths.
Fixes: cf6bf51b5325 ("ASoC: cs4271: Add support for the external mclk")
Fixes: 9a397f473657 ("ASoC: cs4271: add regulator consumer support")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260110195337.2522347-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The series adds support for echo reference functionality by allowing
the capturing of playback audio right before it leaves the DSP.
For this to work correctly we need a virtual DAI that is also connected
to the echo reference capture device and in absence of playback a
signal generator generates silence to allow the capture to run.
When the real playback starts, application will start to receive the
playback audio to be usable for echo reference.
|
|
Merge series from Sen Wang <sen@ti.com>:
This series adds asynchronous mode support to the McASP driver, which
enables independent configuration of bitclocks, frame sync, and audio
configurations between tx(playback) and rx(record). And achieves
simultaneous playback & record using different audio configurations.
It also adds two clean up patches to the McASP driver that disambiguate
and simplifies the logic which avoids the async enhancement from being
too convoluted to review and analyze.
The implementation is based on vendor documentation and patches tested in
both SK-AM62P-LP (sync mode, McASP slave) and AM62D-EVM
(async mode, McASP master, rx & tx has different TDM configs).
Testing verifies async mode functionality while maintaining backward
compatibility with the default sync mode.
Bootlog and Async mode tests on AM62D-EVM: [0]
[0]: https://gist.github.com/SenWang125/f31f9172b186d414695e37c8b9ef127d
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
A bit of a mixed bag of minor misc fixes, improve handling
of volatile SDCA Controls, make some minor bug fixes to jack
detect, improve the cache syncing by adding some more defaults,
and improve some FDL error messages.
|
|
McASP has dedicated clock & frame sync registers for both transmit
and receive. Currently McASP driver only supports synchronous behavior and
couples both TX & RX settings.
Add logic that enables asynchronous mode via ti,async-mode property. In
async mode, playback & record can be done simultaneously with different
audio configurations (tdm slots, tdm width, audio bit depth).
Note the ability to have different tx/rx DSP formats (i2s, dsp_a, etc.),
while possible in hardware, remains to be a gap as it require changes
to the corresponding machine driver interface.
Existing IIS (sync mode) and DIT mode logic remains mostly unchanged.
Exceptions are IIS mode logic that previously assumed sync mode, which has
now been made aware of the distinction. And shared logic across all modes
also now checks for McASP tx/rx-specific driver attributes. Those
attributes have been populated according to the original extent, ensuring
no divergence in functionality.
Constraints no longer applicable for async mode are skipped.
Clock selection options have also been added to include rx/tx-only clk_ids,
exposing independent configuration via the machine driver as well.
Note that asynchronous mode is not applicable for McASP in DIT mode,
which is a transmitter-only mode to interface w/ self-clocking formats.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-5-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Simplify the mcasp_set_clk_pdir caller convention in start/stop stream
function, to make it so that set_clk_pdir gets called regardless when
stream starts and also disables when stream ends.
Functionality-wise, everything remains the same as the previously skipped
calls are now either correctly configured
(when McASP is SND_SOC_DAIFMT_BP_FC - pdir needs to be enabled)
or called with a bitmask of zero (when McASP is SND_SOC_DAIFMT_BC_FC - pdir
gets disabled).
On brief regarding McASP Clock and Frame sync configurations, refer to [0].
[0]:TRM Section 12.1.1.4.2 https://www.ti.com/lit/ug/sprujd4a/sprujd4a.pdf
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-4-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current mcasp_is_synchronous() function does more than what it
proclaims, it also checks if McASP is a frame producer.
Therefore split the original function into two separate ones and
replace all occurrences with the new equivalent logic.
Signed-off-by: Sen Wang <sen@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Tested-by: Paresh Bhagat <p-bhagat@ti.com>
Link: https://patch.msgid.link/20260203003703.2334443-3-sen@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.19
A bunch more small fixes here, plus some more of the constant stream of
quirks. The most notable change here is Richard's change to the cs_dsp
code for the KUnit tests which is relatively large, mostly due to
boilerplate. The tests were triggering large numbers of error messages
as part of verifying that problems with input data are appropriately
detected which in turn caused runtime issues for the framework due to
the performance impact of pushing the logging out, while the logging is
valuable in normal operation it's basically useless while doing tests
designed to trigger it so rate limiting is an appropriate fix.
|
|
Prevent the user from both updating the Selected Mode control
whilst the jack is not present, and from writing values that don't
correspond to a valid jack type (Unknown, in progress, etc.).
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-7-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the SDCA Controls have a defined reset value in the
specification. Update the parsing to add these specification defined
values into the regmap defaults array. This will reduce the number of
registers that are synchronised on a cache sync.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-6-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is helpful to have something in the log showing which firmware file
was loaded by the driver. Update the existing FDL disk file debug
statement to just note that a disk file rather than ACPI file was used,
and add a new info printk that prints out the details of the loaded file
regardless of where that file came from. Likewise, sometimes it is
useful to get a message if the file-sets list is missing, although this
isn't technically an error so make it a debug.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DAPM creates its controls very late in the card creation, so
there is no call into the driver after the controls are created. This
means the jack IRQs can't be guaranteed to be registered after the ALSA
controls are available. If a jack IRQ is received before the controls
are available, currently the driver does not update the Selected Mode as
it is required by the specification to do.
If the ALSA controls are not available update the Selected Mode directly
rather than going through the ALSA control. The ALSA control should pick
up the state once it is created.
Fixes: b9ab3b618241 ("ASoC: SDCA: Add some initial IRQ handlers")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-4-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are very few volatile controls in SDCA that are exported
as ALSA controls, typically Detected Mode is the only common
one. However, the current code does not resume the device when
these ALSA controls are accessed, which will result in the
read/write failing.
Add a new wrapper specifically for volatile controls that will do
the required pm_runtime operations before accessing the register.
Fixes: c3ca24e3fcb6 ("ASoC: SDCA: Create ALSA controls from DisCo")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-3-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
