| Age | Commit message (Collapse) | Author |
|---|
|
- Assorted platform and video driver updates
|
|
Flashing U-Boot for Exynos 7870 requires creating a stub device tree,
where certain properties and nodes are defined which are populated by
the previous bootloader in the phones.
Since these properties are now available in the U-Boot device tree, it's
now possible to use the same blob generated by U-Boot in place of the
stub, when creating boot images. Update the build documentation to
reflect the same.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
U-Boot for this board is programmed to use the external DTB if an
internal device tree is not available. This makes it safe to build boot
images using the non-DTB U-Boot binary, while taking up less space.
Reflect this change in documentation.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Since there is only one internal device tree allowed in U-Boot, the
DEVICE_TREE flag is required for building images for various devices.
Document it in the build guide.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Select remoteproc related configs for i.MX95 EVK to support manage CM7
using 'rproc' cmd.
Update doc to show details on starting CM7 using rproc cmd.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Kuan-Wei Chiu <visitorckw@gmail.com> says:
Add support for the QEMU 'virt' machine on the m68k architecture. The
QEMU virt machine models a generic system utilizing Goldfish virtual
peripherals and is capable of emulating various classic 68k CPUs.
Currently, U-Boot's m68k architecture support focuses on ColdFire
variants. This series expands support to include the classic M680x0
architecture, implementing the necessary exception vectors, startup
code, and a bootinfo parser compatible with the QEMU interface.
Drivers for Goldfish peripherals (TTY, Timer, RTC) and the QEMU
Virtual System Controller (sysreset) are also added to enable serial
console, timekeeping, and system reset functionality.
The implementation has been verified on QEMU targeting the M68040 CPU,
confirming successful hardware initialization and boot to the U-Boot
command shell. Additionally, the CI configuration was verified locally
using gitlab-ci-local "qemu_m68k_virt test.py", resulting in
PASS qemu_m68k_virt test.py.
Link: https://lore.kernel.org/r/20260107201838.3448806-1-visitorckw@gmail.com
[trini: Re-sort MAINTAINERS entries]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Add support for the QEMU 'virt' machine on the m68k architecture. This
board emulates a generic machine based on the Motorola 68040 CPU
equipped with Goldfish virtual peripherals.
Introduce the necessary board configuration and initialization
infrastructure. The implementation includes logic to parse the QEMU
bootinfo interface, enabling dynamic detection of system RAM size to
adapt to the virtual machine's configuration.
Enable the Goldfish TTY driver for serial console output. Additionally,
enable Goldfish RTC and timer drivers to support real-time clock
functionality and nanosecond-resolution delays. Include comprehensive
documentation covering build instructions and usage examples.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
|
|
device for non SPLs"
This series from Dominik Haller <d.haller@phytec.de> provides a way for
TI K3 platforms to determine their boot device outside of SPL and then
adds support for the PHYTEC phyCORE-AM68x/TDA4x SoM.
Link: https://lore.kernel.org/r/20260116014116.767555-1-d.haller@phytec.de
|
|
Add documentation for the PHYTEC phyCORE-AM68x/TDA4x (J721S2 family) SoM.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
|
|
Describe how the QEMU defconfigs can be used with an emulated GPU.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Updates to the JH7110 common description:
- add detailed overview of JH-7110 SoC and boot process
- revise descriptions of deprecated StarFive loader modes
- refresh build directions grouped with SPL debug advice
- reduce usage instructions into common methods shared by supported boards
- cite starfive_visionfive2 board maintainer description of StarFive loader
- cite published datasheets for ambient operating temperature data
Redundant/deprecated sections of each board doc are dropped accordingly:
- deepcomputing fml13v01
- milk-v mars
- pine64 star64 (also add inclusion of JH7110 common description)
- visionfive2
Signed-off-by: E Shattow <e@freeshell.de>
|
|
Add info of boot flow and build steps for AM62Dx EVM.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
|
|
README.falcon was converted to ReST/HTML in 2023.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Add a chapter about networking to the QEMU board documentation.
Describe both different types of networking as well as different emulated
NICs.
Suggested-by: Manjae Cho <manjae.cho@samsung.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
%s/addtional/additional/
Signed-off-by: Manjae Cho <manjae.cho@samsung.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
U-Boot does work on Qualcomm 845-based Pixel 3 and 3 XL.
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Link: https://patch.msgid.link/20260108-pixel-config-v4-1-76a2212b69a5@ixit.cz
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
|
|
This patch is not as E Shattow authored it, but contains non-trivial
changes from Heinrich Schuchardt as well. The original author has
requested that this commit be reverted until the changes can be
committed showing which parts were authored by E Shattow and which by
Heinrich Schuchardt.
This reverts commit 4c105d2ae7b0f847668ff1ef6b410f63ab4290b7.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Add i.MX91 11x11 FRDM Board support.
- Four ddr scripts included w/o inline ecc feature. Support
both 1gb and 2gb DDR
- SDHC/EQOS/I2C/UART supported
- PCA9451 supported, default nominal drive mode
- Documentation added.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
|
|
Updates to the JH7110 common description:
- add detailed overview of JH-7110 SoC and boot process
- revise descriptions of deprecated StarFive loader modes
- refresh build directions grouped with SPL debug advice
- reduce usage instructions into common methods shared by supported boards
- cite starfive_visionfive2 board maintainer description of StarFive loader
- cite published datasheets for ambient operating temperature data
Redundant/deprecated sections of each board doc are dropped accordingly:
- deepcomputing fml13v01
- milk-v mars
- pine64 star64 (also add inclusion of JH7110 common description)
- visionfive2
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Prepare v2026.01-rc5
|
|
https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- Add u-boot SPL support for GX SoCs
- meson_gx_mmc: reduce maximum frequency
- Add support for EFI capsule updates on all Amlogic boards
|
|
The alt name for tispl binary is "tispl.bin" and not "tispl", this patch
fixes the documentation to the correct alt name.
Fixes: def64b493748 ("doc: board: Add document for DFU boot on am62x SoCs")
Fixes: 3633fdbb6b90 ("ti: add support for AM6254atl SiP")
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776
Highlights:
*
SPL / MMC:
o
Fix Kconfig handling for
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
o
Correct raw sector calculations and respect explicit sector values
when loading U-Boot from MMC in SPL
o
Adjust raw MMC loading logic for SoCFPGA platforms
*
EFI boot:
o
Permit EFI booting on SoCFPGA platforms
o
Disable mkeficapsule tool build for Arria 10 where unsupported
*
Agilex5:
o
Upgrade SDHCI controller from SD4HC to SD6HC
o
Enable MMC and Cadence SDHCI support in defconfig
o
Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
o
Revert incorrect GPIO configuration for SDIO_SEL
o
Refine U-Boot DT handling for SD and eMMC boot variants
*
SPI:
o
Allow disabling the DesignWare SPI driver in SPL via Kconfig
*
Board / configuration fixes:
o
Enable random MAC address generation for Cyclone V
o
Fix DE0-Nano-SoC boot configuration
o
Remove obsolete or conflicting options from multiple legacy
SoCFPGA defconfigs
|
|
Add initial support for the Toradex Aquila AM69 module.
The Aquila AM69 SoM is based on the TI AM69 SoC from the Jacinto 7
family and is designed for high-end embedded computing, featuring up to
32GB of LPDDR4 and 256GB eMMC storage, extensive multimedia support (3x
Quad CSI, 2x Quad DSI, DisplayPort, 5x Audio I2S/TDM), six Ethernet
interfaces (1x 1G, 4x 2.5G SGMII, 1x 10G), USB 3.2 Host/DRD support, and
a Wi-Fi 7/BT 5.3 module, alongside an RX8130 RTC, I2C EEPROM and
Temperature Sensor, and optional TPM 2.0 module.
Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69
Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Parth Pancholi <parth.pancholi@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Co-developed-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
Include the FDT for Radxa ROCK 5T in the FIT, in addition to those for
5B and 5B+, and add board selection code to load the 5T FDT when the
DRAM type is LPDDR5 and ADC channel 5 value is close to 1016.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Include FDTs for both ROCK 5B and 5B+ in the FIT and add board selection
code to load the 5B+ FDT when the DRAM type is LPDDR5 and ADC channel 5
value is close to 4095.
U-Boot 2025.07 (Jul 14 2025 - 21:28:20 +0000)
Model: Radxa ROCK 5B+
SoC: RK3588
DRAM: 8 GiB
Features tested on a ROCK 5B+ v1.2:
- SD-card boot
- eMMC boot
- SPI flash boot
- PCIe/NVMe
- Ethernet
- USB/TCPM
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
When one attempts to build Tiger and Jaguar from the same directory,
because Tiger will set the IOMUX to 2 but Jaguar doesn't reset it,
Jaguar will have IOMUX set to 2 if built after Tiger.
This isn't an issue if in separate directories or building Tiger after
Jaguar because the default if missing from the configuration file is 0.
Let's make it explicit that the iomux is 0 for Jaguar.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Upstream TF-A has support for RK3588 since v2.12 so let's document how
to use upstream TF-A instead of the prebuilt binary blob from Rockchip
if one wants to do that.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
The instructions are regularly out of date because the generated or
prebuilt binaries are updated and the filename doesn't match our
instructions anymore.
Additionally, since commit 55a95caaef15 ("tools: ddrbin_tool: add
ddrbin_tool.py and update to v1.21 20241211") end of October 2024,
ddrbin_tool doesn't exist anymore and has been replaced by
ddrbin_tool.py python script (which currently isn't an executable) so
let's update these instructions as well.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
s/Uenv.txt/uEnv.txt
s/then/than
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
J742S2 SOC is derivative of J784S4, most of build infra of j784s4 is used
to build u-boot for J742S2 EVM board.
Add guide users on how to build for that board.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
|
|
Add building and usage instructions for SPL.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Link: https://patch.msgid.link/20251126-spl-gx-v5-10-6cbffb2451ca@postmarketos.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Prepare v2026.01-rc4
|
|
Fix boot log output not being rendered correctly, fix
it doing the same as done in verdin-am62.rst.
Fixes: b8c43968b801 ("board: toradex: add verdin am62p support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
- Assorted updates
|
|
Document the image preparation and flashing techniques for
Exynos7870-based boards. This is done in a separate file in a
sub-directory, which is linked back to the main documentation.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
Add support for a generic platform which intends to support multiple
boards powered by ARMv8 Samsung Exynos SoCs. Some important features
include:
* Fastboot: This is present to provide an open alternative to Samsung's
proprietary Odin protocol. The board file configures certain features
for fastboot, such as a dynamically allocated fastboot buffer, and
standardized (lowercase) partition aliases.
* EFI: Kernel image can be loaded from an EFI partition. This
adopts a standard booting process, which multiple OS distributions
can rely on.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
|
This adds support for the Kontron Electronics OSM-S i.MX93 SoM
and the matching baseboard BL i.MX93.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
|
This adds support for the Kontron Electronics OSM-S i.MX8MP SoM
and the matching baseboard BL i.MX8MP.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
|
|
Add support for imx6ulz_smm_m2d, based on the M2 architecture.
Signed-off-by: Andrea Calabrese <andrea.calabrese@amarulasolutions.com>
|
|
As stated in PXELINUX doc [1], the PXE configuration file has to be in
the format of "01-MAC-address" for Ethernet connections:
The hardware type (using its ARP "htype" code) and address, all in
lowercase hexadecimal with dash separators. For example, for an
Ethernet (i.e. ARP hardware type "1") with address
"88:99:AA:BB:CC:DD", it would search for the filename
"01-88-99-aa-bb-cc-dd".
Indeed, PXE implementation in U-Boot looks for files like that, as can
be seen from this call chain:
format_mac_pxe()
pxe_mac_path()
pxe_get()
extlinux_pxe_read_bootflow()
Mention the fact that PXE expects the configuration file to be prepended
with "01" in the PXE section of E850-96 documentation. While at it, fix
some other minor issues in PXE section.
[1] https://wiki.syslinux.org/wiki/index.php?title=PXELINUX
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
|
|
The SPL_TEXT_BASE for AM62x SiP is set as 0x82000000 whereas the
documentation states 0x81880000 as the PRELOADED_BL33_BASE value.
Both should match to allow TFA to jump to the address where A53 SPL has
been loaded.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Update the TI firmware repository URL from git.ti.com to the
GitHub mirror at github.com/TexasInstruments/ti-linux-firmware
which is much more reliable.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reported-by: Tom Rini <trini@konsulko.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
The LVDS Display Interface Transmitter handles the LVDS protocol:
it maps the pixels received from the upstream Pixel-DMA (LTDC)
onto the LVDS PHY.
The LVDS controller driver supports the following high-level features:
• FDP-Link-I and OpenLDI (v0.95) protocols
• Single-Link or Dual-Link operation
• Single-Display or Double-Display (with the same content
duplicated on both)
• Flexible Bit-Mapping, including JEIDA and VESA
• RGB888 or RGB666 output
• Synchronous design, with one input pixel per clock cycle
• No resolution limitation.
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
|
|
Anshul Dalal <anshuld@ti.com> says:
This patch series adds support for AM6254atl SiP (or AM62x SiP for
short) to U-Boot.
The OPN (Orderable Part Number) 'AM6254atl' expands as follows[1]:
AM6254atl
||||
|||+-- Feature Lookup (L indicates 512MiB of integrated LPDDR4)
||+--- Device Speed Grade (T indicates 1.25GHz on A53 cores)
|+---- Silicon PG Revision (A indicates SR 1.0)
+----- Core configuration (4 indicates A53's in Quad core config)
AM62x SiP provides the existing AM62x SoC with 512MiB of DDR
integrated in a single packages. The first 4 patches in the series
are cherry-picked from the devicetree-rebasing repository at
'v6.18-rc2-dts'.
Link: https://lore.kernel.org/r/20251025-62sip_support-v3-0-b4c8314d0055@ti.com
|
|
TI's AM6254atl (or AM62x SiP for short) provides the existing AM62x SoC
with 512MiB of DDR integrated in a single package.
This patch adds the necessary U-Boot devie tree files, the required
defconfigs along with the documentation for the AM62x SiP EVM.
AM62x SiP differs from the already supported AM62x in following ways:
- OP-TEE for the AM62x resides from 0x9e800000 to 0xa0000000 which needs
to be moved to 0x80080000 to free up space at end of DDR in AM62x SiP
with 512MiB of memory. This is required to allow U-Boot to relocate to
end of DDR before booting to the kernel.
- Changes to the env:
1. splashimage address updated from 0x80200000 to 0x81a00000
2. DFU addresses updated to match updated TEXT_BASE for SPL and U-Boot
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
This patch adds user documentation for R5 falcon mode for AM62
platforms. The main section is added to am62x_sk.rst and other documents
just include the relevant sections. Steps to build falcon support, usage
and the modified R5 memory map have been documented.
Two svg images have also been added for reference, one for the modified
tifalcon.bin and other for the fitImage format specific to R5 falcon
mode.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
|
|
Add boot support and peripherals like eMMC/SD, UART, I2C, GPIO, ENETC0/1
and PCIE0/1 for iMX95 15x15 LPDDR4X EVK.
Updated doc for build instructions.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
Add guide on how to use the Remote Processors on i.MX8M and i.MX93.
Update MAINTAINERS to include doc/board/nxp.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
readme was missing instructions to build M2B. Now added.
Signed-off-by: Andrea Calabrese <andrea.calabrese@amarulasolutions.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
