summaryrefslogtreecommitdiff
path: root/configs/omap35_logic_defconfig
AgeCommit message (Collapse)Author
2025-11-07configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2025-05-12configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-10-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-08-23spl: mmc: Try to clean up raw-mode optionsSimon Glass
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more direct way. This makes it easier to understand the options with 'make menuconfig'. There are three different ways of specifying the offset: - sector offset - partition number - partition type So make these a choice, so it is more obvious what is going on. Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed. Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Simon Glass <sjg@chromium.org>
2024-08-06omap3: Define DRAM banks number in Kconfig instead of defconfigsPaul Kocialkowski
The number of DRAM banks was defined to the same value in each OMAP3 board defconfig, which is expected and hardcoded in the code. Move the common definition to the Kconfig option declaration instead. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2024-08-06omap3: Define maximum SPL size in Kconfig instead of defconfigsPaul Kocialkowski
The maximum SPL size was defined to the same value in each OMAP3 board defconfig. Move the common definition to the Kconfig option declaration instead. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2024-08-06omap3: Define maximum U-Boot size in Kconfig instead of defconfigsPaul Kocialkowski
The maximum U-Boot size was defined to the same value in each OMAP3 board defconfig. Move the common definition to the Kconfig option declaration instead. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2024-08-06omap3: Define common init stack pointer address in KconfigPaul Kocialkowski
The init stack pointer was defined to the same value in each OMAP3 board defconfig. Move the common definition to the Kconfig option declaration instead. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2024-08-06omap3: Define common SPL text base in Kconfig instead of defconfigsPaul Kocialkowski
The SPL text base was defined to the same value in each OMAP3 board defconfig. Move the common definition to the Kconfig option declaration instead. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2024-05-07arm: ti: logicpd-torpedo: Migrate to OF_UPSTREAMAdam Ford
The DM37 and OMAP35 Torpedo share a few files, but both of them can be migrated to OF_UPSTREAM with a small update to their respective u-boot.dtsi files to address changes made the aliases. Both defconfigs need to properly point to the upstream directory structure for the device trees. With those updated, the U-Boot device tree files can be deleted. Signed-off-by: Adam Ford <aford173@gmail.com> V2: Remove DT from Makefile
2024-03-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-16mtd: Rename SPL_MTD_SUPPORT to SPL_MTDSean Anderson
Rename SPL_MTD_SUPPORT to SPL_MTD in order to match MTD. This allows using CONFIG_IS_ENABLED to test for MTD support. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2023-11-16nand: Calculate SYS_NAND_BLOCK_PAGES (neeĢ SYS_NAND_PAGE_COUNT) automaticallySean Anderson
Contrary to what the help message says, this is the number of pages per block. Calculate it automatically based on SYS_NAND_BLOCK_SIZE and SYS_NAND_PAGE_SIZE. To better reflect its semantics, rename it to SYS_NAND_BLOCK_PAGES. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2023-10-06spl: Rename SYS_SPL_ARGS_ADDR to SPL_PAYLOAD_ARGS_ADDRSimon Glass
Rename this so that SPL is first, as per U-Boot convention. Also add PAYLOAD_ since this is where in memory the parameters for the payload have been stored. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-10-06spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...Simon Glass
We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-03-27configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-02-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-05Convert CONFIG_SYS_NAND_MAX_OOBFREE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_MAX_OOBFREE CONFIG_SYS_NAND_MAX_ECCPOS Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOADTom Rini
The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_SPL_KERNEL_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_ARGS_ADDR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_ARGS_ADDR In doing so, we also consistently use this variable for SPL_OS_BOOT and not CONFIG_SYS_FDT_BASE in some cases. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SPL_PAD_TO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE CONFIG_TPL_PAD_TO CONFIG_TPL_MAX_SIZE Note that we need to make TPL_MAX_SIZE be hex, and so move and convert the existing places. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-22configs: Resync with savedefconfigTom Rini
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-21spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to KconfigAlexandru Gagniuc
Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-11configs: omap3x_logic: Enable LTO on more LogicPD OMAP3 boardsAdam Ford
There are five omap3 based boards from LogicPD. Two of them have added LTO support. Add the remaining three to use LTO. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-06Convert CONFIG_NAND_OMAP_ECCSCHEME to KconfigTom Rini
The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in include/linux/mtd/omap_gpmc.h for valid ECC schemes. Make which one we will use be a choice statement, enumerating the ones which we have implemented. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SYS_NAND_PAGE_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-06Convert CONFIG_SPL_NAND_LOAD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-15configs: omap3x_logic: Fix boot hang by reducing SYS_MALLOC_F_LENAdam Ford
The AM3517 uses SYS_MALLOC_F_LEN of size 0x3000, but the rest of the OMAP3 boards from LogicPD / BeaconEmbedded use 0x4000, but they don't boot SPL. Reduce the malloc size to restore booting. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210625185717.243211-1-aford173@gmail.com
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-27configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-15configs: omap3_logic: Enable CONFIG_SPL_ALLOC_BDAdam Ford
With bd_info dropped from the data section, the Logic PD OMAP3 boards and AM3517 fail to boot. Enabling CONFIG_SPL_ALLOC_BD restores them. Fixes: 38d6b7ebdaee ("spl: Drop bd_info in the data section") Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-05 14:17:48 +0000