diff options
| author | Jonas Karlman <jonas@kwiboo.se> | 2024-02-04 20:53:06 +0000 |
|---|---|---|
| committer | Kever Yang <kever.yang@rock-chips.com> | 2024-02-05 15:00:51 +0800 |
| commit | 6de9d7b2f13c9648734b8b051831b2b489610834 (patch) | |
| tree | 07ebbf236e025b44378ce8bc78b9ea06a6c5082e /configs/nanopi-r5c-rk3568_defconfig | |
| parent | ebe293bae79d8c64d9cd4284044e25ddadd074b5 (diff) | |
rockchip: rk35xx: Enable eMMC HS200 mode by default
Testing has shown that writing to eMMC using a slower mode then HS200
typically generate an ERROR on first attempt on RK3588.
# Rescan using MMC legacy mode
=> mmc rescan 0
# Write a single block to sector 0x4000 fails with ERROR
=> mmc write 20000000 4000 1
# Write a single block to sector 0x4000 now works
=> mmc write 20000000 4000 1
With the MMC_SPEED_MODE_SET Kconfig option enabled.
Writing to eMMC using HS200 mode work more reliably than slower modes on
RK35xx boards. Enable MMC_HS200_SUPPORT Kconfig option by default to
prefer use of HS200 mode on RK356x and RK3588.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Diffstat (limited to 'configs/nanopi-r5c-rk3568_defconfig')
| -rw-r--r-- | configs/nanopi-r5c-rk3568_defconfig | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/configs/nanopi-r5c-rk3568_defconfig b/configs/nanopi-r5c-rk3568_defconfig index 833cff0e457..f5a472d03d7 100644 --- a/configs/nanopi-r5c-rk3568_defconfig +++ b/configs/nanopi-r5c-rk3568_defconfig @@ -58,8 +58,6 @@ CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_MISC=y CONFIG_SUPPORT_EMMC_RPMB=y -CONFIG_MMC_HS200_SUPPORT=y -CONFIG_SPL_MMC_HS200_SUPPORT=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y |