| Age | Commit message (Collapse) | Author |
|---|
|
Diamond Rapids introduces two types of PCIe related uncore PMUs:
"uncore_pcie4_*" and "uncore_pcie6_*".
To ensure that generic PCIe events (e.g., UNC_PCIE_CLOCKTICKS) can match
and collect events from both PMU types, slightly relax the wildcard
matching logic in perf_pmu__match_wildcard().
This change allows a wildcard such as "pcie" to match PMU names that
include a numeric suffix, such as "pcie4_*" and "pcie6_*".
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20251231224233.113839-12-zide.chen@intel.com
|
|
So that it can show the correct encoding info in the JSON output.
$ perf list -j hw
[
{
"Unit": "cpu",
"Topic": "legacy hardware",
"EventName": "branch-instructions",
"EventType": "Kernel PMU event",
"BriefDescription": "Retired branch instructions [This event is an alias of branches]",
"Encoding": "cpu/event=0xc4/"
},
...
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
perf_event_attr has gained a new field, config4, so add support for it
extending the existing configN support.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The terms for a json event should be weak so they don't override
command line options.
Before:
```
$ perf record -vv -c 1000 -e uops_issued.any -o /dev/null true 2>&1
|grep "{ sample_period, sample_freq }"
{ sample_period, sample_freq } 200003
{ sample_period, sample_freq } 2000003
{ sample_period, sample_freq } 1000
```
After:
```
$ perf record -vv -c 1000 -e uops_issued.any -o /dev/null true 2>&1
|grep "{ sample_period, sample_freq }"
{ sample_period, sample_freq } 1000
{ sample_period, sample_freq } 1000
{ sample_period, sample_freq } 1000
```
Fixes: 84bae3af20d0 ("perf pmu: Don't eagerly parse event terms")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Now that legacy hardware and cache events are in json, having the
lexer match the specific event is no longer necessary and generic PMU
parsing can take place. Because of this remove the specific term
parsing, event adding, and passing of alternate_hw_config which was
now always PERF_COUNT_HW_MAX.
This mirrors a similar change for software events in commit 6e9fa4131abb
("perf parse-events: Remove non-json software events").
With no hard coded legacy hardware or cache events the wild card, case
insensitivity, etc. is consistent for events. This does, however, mean
events like cycles will wild card against all PMUs. A change does the
same was originally posted and merged from:
https://lore.kernel.org/r/20240416061533.921723-10-irogers@google.com
and reverted by Linus in commit 4f1b067359ac ("Revert "perf
parse-events: Prefer sysfs/JSON hardware events over legacy"") due to
his dislike for the cycles behavior on ARM. Earlier patches in this
series make perf record event opening failures non-fatal and hide the
cycles event's failure to open on ARM in perf record, so it is
expected the behavior will now be transparent in perf record. perf
stat with a cycles event will wildcard open the event on all PMUs. As
cycles is a "default event", the perf stat behavior for default events
was updated to only open them on core/software PMUs.
The change to support legacy events with PMUs was done to clean up
Intel's hybrid PMU implementation. Having sysfs/json events with
increased priority to legacy was requested by Mark Rutland
<mark.rutland@arm.com> to fix Apple-M PMU issues wrt broken legacy
events on that PMU. It was requested that RISC-V be able to add events
to the perf tool json so the PMU driver didn't need to map legacy
events to config encodings:
https://lore.kernel.org/lkml/20240217005738.3744121-1-atishp@rivosinc.com/
A previous series of patches decreasing legacy hardware event
priorities was posted in:
https://lore.kernel.org/lkml/20250416045117.876775-1-irogers@google.com/
Namhyung Kim <namhyung@kernel.org> mentioned that hardware and
software events can be implemented similarly:
https://lore.kernel.org/lkml/aIJmJns2lopxf3EK@google.com/
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add support to finding/adding events from the default_core event
table. If an event already exists from sysfs/json then the
default_core configuration is saved in the legacy_terms string. Lazily
use the legacy_terms string to set a legacy hardware or cache event as
deprecated if the core PMU doesn't support it. Use the legacy terms
string to set the alternate_hw_config, avoiding the value needing to
be passed from the parse_events parser.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add the PMU terms legacy-hardware-config and
legacy-cache-config. These terms are similar to the config term in
that their values are assigned to the perf_event_attr config
value. They differ in that the PMU type is switched to be either
PERF_TYPE_HARDWARE or PERF_TYPE_HW_CACHE, and the PMU type is moved
into the extended type information of the config value. This will
allow later patches to add legacy events to json.
An example use of the terms is in the following:
```
$ perf stat -vv -e 'cpu/legacy-hardware-config=1/,cpu/legacy-cache-config=0x10001/' true
Using CPUID GenuineIntel-6-8D-1
Attempt to add: cpu/legacy-hardware-config=0x1/
..after resolving event: cpu/legacy-hardware-config=0x1/
Attempt to add: cpu/legacy-cache-config=0x10001/
..after resolving event: cpu/legacy-cache-config=0x10001/
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0x1 (PERF_COUNT_HW_INSTRUCTIONS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
------------------------------------------------------------
sys_perf_event_open: pid 994937 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 3 (PERF_TYPE_HW_CACHE)
size 136
config 0x10001 (PERF_COUNT_HW_CACHE_RESULT_MISS | PERF_COUNT_HW_CACHE_OP_READ | PERF_COUNT_HW_CACHE_L1I)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
------------------------------------------------------------
sys_perf_event_open: pid 994937 cpu -1 group_fd -1 flags 0x8 = 4
cpu/legacy-hardware-config=1/: -1: 1364046 414756 414756
cpu/legacy-cache-config=0x10001/: -1: 57453 414756 414756
cpu/legacy-hardware-config=1/: 1364046 414756 414756
cpu/legacy-cache-config=0x10001/: 57453 414756 414756
Performance counter stats for 'true':
1,364,046 cpu/legacy-hardware-config=1/
57,453 cpu/legacy-cache-config=0x10001/
0.001988593 seconds time elapsed
0.002194000 seconds user
0.000000000 seconds sys
```
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Factor existing functionality in perf_pmu__name_from_config into a
helper that will be used in later patches.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The FILE argument was necessary for the scanner but now that
functionality is not being used we can switch to just using
io__getline which should cut down on stdio buffer usage.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Now the events file isn't directly parsed from a FILE but stored in a
string prior to parsing, remove the FILE argument to the associated
scanner functions as they only ever pass NULL.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When an event/alias is created for a PMU the terms are eagerly parsed
using parse_events_terms. For a command like perf stat or perf record,
the particular event/alias will be found, the terms parsed, the
terms cloned for use in the event parsing, and then the terms used to
configure the perf_event_attr. Events/aliases may be eagerly loaded,
such as from sysfs or in perf list, in which case the aliases terms
will be little or never used. To avoid redundant work, to avoid
cloning, and to reduce memory overhead, hold the terms for an event as
a string until they need handling as a term list. This may introduce
duplicate parsing if an event is repeated in a list, but this
situation is expected to be uncommon.
Measuring the number of instructions before and after with a sysfs
event and perf stat, there is a minor reduction in the number of
instructions executed by 0.3%.
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Provide ratio-to-prev term which allows the user to
set the event sample period of two events corresponding
to a desired ratio.
If using on an Intel x86 platform with Auto Counter Reload support, also
set corresponding event's config2 attribute with a bitmask which
counters to reset and which counters to sample if the desired ratio is
met or exceeded.
On other platforms, only the sample period is affected by the
ratio-to-prev term.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add event APIs for the tracepoint PMU allowing things like perf list
to function using it. For perf list add the tracepoint format in the
long description (shown with -v).
$ sudo perf list -v tracepoint
List of pre-defined events (to be used in -e or -M):
alarmtimer:alarmtimer_cancel [Tracepoint event]
[name: alarmtimer_cancel
ID: 416
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:void * alarm; offset:8; size:8; signed:0;
field:unsigned char alarm_type; offset:16; size:1; signed:0;
field:s64 expires; offset:24; size:8; signed:1;
field:s64 now; offset:32; size:8; signed:1;
print fmt: "alarmtimer:%p type:%s expires:%llu now:%llu",REC->alarm,__print_flags((1 << REC->alarm_type)," | ",{ 1 << 0,
"REALTIME" },{ 1 << 1,"BOOTTIME" },{ 1 << 3,"REALTIME Freezer" },{ 1 << 4,"BOOTTIME Freezer" }),REC->expires,REC->now
. Unit: tracepoint]
alarmtimer:alarmtimer_fired [Tracepoint event]
[name: alarmtimer_fired
ID: 418
...
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250725185202.68671-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
FILENAME_MAX is the same as PATH_MAX (4kb) in glibc rather than
NAME_MAX's 255. Switch to using NAME_MAX and ensure the '\0' is
accounted for in the path's buffer size.
Fixes: 754baf426e09 ("perf pmu: Change aliases from list to hashmap")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250717150855.1032526-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If the short and long descriptions are the same then save space and
don't store both of them. When storing the desc in the perf_pmu_alias,
don't duplicate the desc into the long_desc.
By avoiding storing the duplicate the size of the events string in the
binary on x86 is reduced by 29,840 bytes.
Fix tests that expect a duplicated description.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If sysfs isn't mounted then we may fail to read a PMU's type. In this
situation resort to lookup of wellknown types. Only applies to
software, tracepoint and breakpoint PMUs.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250710235126.1086011-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
DRM clients expose information through usage stats as documented in
Documentation/gpu/drm-usage-stats.rst (available online at
https://docs.kernel.org/gpu/drm-usage-stats.html). Add a tool like
PMU, similar to the hwmon PMU, that exposes DRM information. For
example on a tigerlake laptop:
```
$ perf list drm
List of pre-defined events (to be used in -e or -M):
drm:
drm-active-stolen-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-active-system0
[Total memory active in one or more engines. Unit: drm_i915]
drm-engine-capacity-video
[Engine capacity. Unit: drm_i915]
drm-engine-copy
[Utilization in ns. Unit: drm_i915]
drm-engine-render
[Utilization in ns. Unit: drm_i915]
drm-engine-video
[Utilization in ns. Unit: drm_i915]
drm-engine-video-enhance
[Utilization in ns. Unit: drm_i915]
drm-purgeable-stolen-system0
[Size of resident and purgeable memory bufers. Unit: drm_i915]
drm-purgeable-system0
[Size of resident and purgeable memory bufers. Unit: drm_i915]
drm-resident-stolen-system0
[Size of resident memory bufers. Unit: drm_i915]
drm-resident-system0
[Size of resident memory bufers. Unit: drm_i915]
drm-shared-stolen-system0
[Size of shared memory bufers. Unit: drm_i915]
drm-shared-system0
[Size of shared memory bufers. Unit: drm_i915]
drm-total-stolen-system0
[Size of shared and private memory. Unit: drm_i915]
drm-total-system0
[Size of shared and private memory. Unit: drm_i915]
```
System wide data can be gathered:
```
$ perf stat -x, -I 1000 -e drm-active-stolen-system0,drm-active-system0,drm-engine-capacity-video,drm-engine-copy,drm-engine-render,drm-engine-video,drm-engine-video-enhance,drm-purgeable-stolen-system0,drm-purgeable-system0,drm-resident-stolen-system0,drm-resident-system0,drm-shared-stolen-system0,drm-shared-system0,drm-total-stolen-system0,drm-total-system0
1.000904910,0,bytes,drm-active-stolen-system0,1,100.00,,
1.000904910,0,bytes,drm-active-system0,1,100.00,,
1.000904910,36,capacity,drm-engine-capacity-video,1,100.00,,
1.000904910,0,ns,drm-engine-copy,1,100.00,,
1.000904910,1472970566175,ns,drm-engine-render,1,100.00,,
1.000904910,0,ns,drm-engine-video,1,100.00,,
1.000904910,0,ns,drm-engine-video-enhance,1,100.00,,
1.000904910,0,bytes,drm-purgeable-stolen-system0,1,100.00,,
1.000904910,38199296,bytes,drm-purgeable-system0,1,100.00,,
1.000904910,0,bytes,drm-resident-stolen-system0,1,100.00,,
1.000904910,4643196928,bytes,drm-resident-system0,1,100.00,,
1.000904910,0,bytes,drm-shared-stolen-system0,1,100.00,,
1.000904910,1886871552,bytes,drm-shared-system0,1,100.00,,
1.000904910,0,bytes,drm-total-stolen-system0,1,100.00,,
1.000904910,4643196928,bytes,drm-total-system0,1,100.00,,
2.264426839,0,bytes,drm-active-stolen-system0,1,100.00,,
```
Or for a particular process:
```
$ perf stat -x, -I 1000 -e drm-active-stolen-system0,drm-active-system0,drm-engine-capacity-video,drm-engine-copy,drm-engine-render,drm-engine-video,drm-engine-video-enhance,drm-purgeable-stolen-system0,drm-purgeable-system0,drm-resident-stolen-system0,drm-resident-system0,drm-shared-stolen-system0,drm-shared-system0,drm-total-stolen-system0,drm-total-system0 -p 200027
1.001040274,0,bytes,drm-active-stolen-system0,6,100.00,,
1.001040274,0,bytes,drm-active-system0,6,100.00,,
1.001040274,12,capacity,drm-engine-capacity-video,6,100.00,,
1.001040274,0,ns,drm-engine-copy,6,100.00,,
1.001040274,1542300,ns,drm-engine-render,6,100.00,,
1.001040274,0,ns,drm-engine-video,6,100.00,,
1.001040274,0,ns,drm-engine-video-enhance,6,100.00,,
1.001040274,0,bytes,drm-purgeable-stolen-system0,6,100.00,,
1.001040274,13516800,bytes,drm-purgeable-system0,6,100.00,,
1.001040274,0,bytes,drm-resident-stolen-system0,6,100.00,,
1.001040274,27746304,bytes,drm-resident-system0,6,100.00,,
1.001040274,0,bytes,drm-shared-stolen-system0,6,100.00,,
1.001040274,0,bytes,drm-shared-system0,6,100.00,,
1.001040274,0,bytes,drm-total-stolen-system0,6,100.00,,
1.001040274,27746304,bytes,drm-total-system0,6,100.00,,
2.016629075,0,bytes,drm-active-stolen-system0,6,100.00,,
```
As with the hwmon PMU, high numbered PMU types are used to encode
multiple possible "DRM" PMUs. The appropriate fdinfo is found by
scanning /proc and filtering which fdinfos to read with stat. To avoid
some unneeding scanning, events not starting with "drm-" are
ignored. The patch builds on commit 57e13264dcea ("perf pmus:
Restructure pmu_read_sysfs to scan fewer PMUs") and later so that only
if full wild carding is being done, the PMU starts with "drm_" or the
event starts with "drm-" will /proc be scanned. That is there should
be little to no cost in this PMU unless DRM events are requested.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250624231837.179536-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The pmu name or alias_name fields may be NULL and should be skipped if
so. This is done in all loops of perf_pmu___name_match except the
final wildcard loop which was an oversight.
Fixes: 63e287131cf0c59b ("perf pmu: Rename name matching for no suffix or wildcard variants")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250527215035.187992-1-irogers@google.com
[ Fixup the Fixes: tag to the right commit ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Finding an alias for things like perf_pmu__have_event() would need to
search the aliases list, whilst this happens relatively infrequently it
can be a significant overhead in testing.
Switch to using a hashmap. Move common initialization code to
perf_pmu__init(). Refactor the test 'struct perf_pmu_test_pmu' to not
have perf pmu within it to better support the perf_pmu__init() function.
Before:
```
$ time perf test "Parsing of PMU event table metrics"
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
real 0m13.287s
user 0m13.026s
sys 0m0.532s
```
After:
```
$ time perf test "Parsing of PMU event table metrics"
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
real 0m13.011s
user 0m12.885s
sys 0m0.485s
```
Committer testing:
root@number:~# grep -m1 'model name' /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~#
Before:
root@number:~# time perf test "Parsing of PMU event table metrics"
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
real 0m9.296s
user 0m9.361s
sys 0m0.063s
root@number:~#
After:
root@number:~# time perf test "Parsing of PMU event table metrics"
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
real 0m9.286s
user 0m9.354s
sys 0m0.062s
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250512194622.33258-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -C option allows the CPUs for a list of events to be specified but
its not possible to set the CPU for a single event. Add a term to
allow this. The term isn't a general CPU list due to ',' already being
a special character in event parsing instead multiple cpu= terms may
be provided and they will be merged/unioned together.
An example of mixing different types of events counted on different CPUs:
```
$ perf stat -A -C 0,4-5,8 -e "instructions/cpu=0/,l1d-misses/cpu=4,cpu=5/,inst_retired.any/cpu=8/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 6,979,225 instructions/cpu=0/ # 0.89 insn per cycle
CPU4 75,138 cpu/l1d-misses/
CPU5 1,418,939 cpu/l1d-misses/
CPU8 797,553 cpu/inst_retired.any,cpu=8/
CPU0 7,845,302 cycles
CPU4 6,546,859 cycles
CPU5 185,915,438 cycles
CPU8 2,065,668 cycles
0.112449242 seconds time elapsed
```
Committer testing:
root@number:~# grep -m1 "model name" /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~# perf stat -A -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 2,398,351 instructions/cpu=0/ # 0.44 insn per cycle
CPU0 2,398,152 instructions # 0.44 insn per cycle
CPU1 1,265,634 instructions # 0.49 insn per cycle
CPU2 606,087 instructions # 0.50 insn per cycle
CPU3 4,025,752 instructions # 0.52 insn per cycle
CPU4 4,236,810 instructions # 0.53 insn per cycle
CPU5 3,984,832 instructions # 0.66 insn per cycle
CPU6 434,132 instructions # 0.44 insn per cycle
CPU7 65,752 instructions # 0.41 insn per cycle
CPU8 459,083 instructions # 0.48 insn per cycle
CPU9 6,464,161 instructions # 1.31 insn per cycle
<SNIP>
root@number:~# perf stat -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.
Performance counter stats for 'system wide':
144,822 instructions/cpu=0/ # 0.03 insn per cycle
4,666,114 instructions # 0.93 insn per cycle
2,583 l1d-misses
4,993,633 cycles
0.000868512 seconds time elapsed
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250403194337.40202-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf mem/c2c' uses IBS Op PMU on AMD platforms.
IBS Op PMU on Zen5 uarch has added support for Load Latency filtering.
Implement 'perf mem/c2c' --ldlat using IBS Op Load Latency filtering
capability.
Some subtle differences between AMD and other arch:
o --ldlat is disabled by default on AMD
o Supported values are 128 to 2048.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20250429035938.1301-4-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The updated Intel vendor events add retirement latency for
graniterapids:
https://lore.kernel.org/lkml/20250322063403.364981-14-irogers@google.com/
This change makes those values available within an alias/event within a
PMU and saves them into the evsel at event parse time.
When no TPEBS data is available the default values are substituted in
for TMA metrics that are using retirement latency events - currently
just those on graniterapids.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lore.kernel.org/r/20250414174134.3095492-16-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Thomas Richter <tmricht@linux.ibm.com> reported a double put on the
cpumap for the placeholder core PMU:
https://lore.kernel.org/lkml/20250318095132.1502654-3-tmricht@linux.ibm.com/
Requiring the caller to get the cpumap is not how these things are
usually done, switch cpu_map__online to do the get and then fix up any
use cases where a put is needed.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20250318171914.145616-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
After pmu_add_cpu_aliases() is called, perf_pmu__num_events() returns an
incorrect value that double counts common events and doesn't match the
actual count of events in the alias list. This is because after
'cpu_aliases_added == true', the number of events returned is
'sysfs_aliases + cpu_json_aliases'. But when adding 'case
EVENT_SRC_SYSFS' events, 'sysfs_aliases' and 'cpu_json_aliases' are both
incremented together, failing to account that these ones overlap and
only add a single item to the list. Fix it by adding another counter for
overlapping events which doesn't influence 'cpu_json_aliases'.
There doesn't seem to be a current issue because it's used in perf list
before pmu_add_cpu_aliases() so the correct value is returned. Other
uses in tests may also miss it for other reasons like only looking at
uncore events. However it's marked as a fixes commit in case any new fix
with new uses of perf_pmu__num_events() is backported.
Fixes: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250226104111.564443-3-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Avoid DIR allocations when scanning sysfs by using io_dir for the
readdir implementation, that allocates about 1kb on the stack.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250222061015.303622-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In sysfs, the perf events are all located in
/sys/bus/event_source/devices/ but some places ended up hard-coding the
location to be at the root of /sys/devices/ which could be very risky as
you do not exactly know what type of device you are accessing in sysfs
at that location.
So fix this all up by properly pointing everything at the bus device
list instead of the root of the sysfs devices/ tree.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/2025021955-implant-excavator-179d@gregkh
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Wildcard PMU naming will match a name like pmu_1 to a PMU name like
pmu_10 but not to a PMU name like pmu_2 as the suffix forms part of
the match. No suffix matching will match pmu_10 to either pmu_1 or
pmu_2. Add or rename matching functions on PMU to make it clearer what
kind of matching is being performed.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250201074320.746259-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a new common config term "aux-action" to use for configuring AUX area
trace pause / resume. The value is a string that will be parsed in a
subsequent patch.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241216070244.14450-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove use of a FILE and switch to reading a string that is then
passed to perf_cpu_map__new().
Being able to remove perf_cpu_map__read() avoids duplicated parsing logic.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241206044035.1062032-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move pmu_metrics_table__find() to the jevents.py generated pmu-events.c
and remove indirection override for ARM.
The movement removes perf_pmu__find_metrics_table that exists to enable
the ARM override.
The ARM override isn't necessary as just the CPUID, not PMU, is used in
the metric table lookup.
On non-ARM the CPU argument is just ignored for the CPUID, for ARM -1 is
passed so that the CPUID for the first logical CPU is read.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On ARM the cpuid is dependent on the core type of the CPU in
question. The PMU was passed for the sake of the CPU map but this
means in places a temporary PMU is created just to pass a CPU
value. Just pass the CPU and fix up the callers.
As there are no longer PMU users in header.h, shuffle forward
declarations earlier to work around build failures.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Zong-You Xie <ben717@andestech.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20241107162035.52206-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the base PMU calls necessary for hwmon_pmu(s) to be
created/deleted and events found, listed, opened and read.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20241109003759.473460-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use the regular PMU approaches with tool json events to reduce the
amount of special tool_pmu code - tool_pmu__config_terms and
tool_pmu__for_each_event_cb are removed. Some functions remain, like
tool_pmu__str_to_event, as conveniences to metricgroups. Add
tool_pmu__skip_event/tool_pmu__num_skip_events to handle the case that
tool json events shouldn't appear on certain architectures. This isn't
done in jevents.py due to complexity in the empty-pmu-events.c and
when all vendor json is built into the tool.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add the expr literals like "#smt_on" as tool events, this allows stat
events to give the values. On my laptop with hyperthreading enabled:
```
$ perf stat -e "has_pmem,num_cores,num_cpus,num_cpus_online,num_dies,num_packages,smt_on,system_tsc_freq" true
Performance counter stats for 'true':
0 has_pmem
8 num_cores
16 num_cpus
16 num_cpus_online
1 num_dies
1 num_packages
1 smt_on
2,496,000,000 system_tsc_freq
0.001113637 seconds time elapsed
0.001218000 seconds user
0.000000000 seconds sys
```
And with hyperthreading disabled:
```
$ perf stat -e "has_pmem,num_cores,num_cpus,num_cpus_online,num_dies,num_packages,smt_on,system_tsc_freq" true
Performance counter stats for 'true':
0 has_pmem
8 num_cores
16 num_cpus
8 num_cpus_online
1 num_dies
1 num_packages
0 smt_on
2,496,000,000 system_tsc_freq
0.000802115 seconds time elapsed
0.000000000 seconds user
0.000806000 seconds sys
```
As zero matters for these values, in stat-display
should_skip_zero_counter only skip the zero value if it is not the
first aggregation index.
The tool event implementations are used in expr but not evaluated as
events for simplicity. Also core_wide isn't made a tool event as it
requires command line parameters.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Now the events are associated with the tool PMU, rename the functions
to reflect this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To better reflect the events listed are from the tool PMU. Rename the
enum values from PERF_TOOL_* to TOOL_PMU__EVENT_*.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than treat tool events as a special kind of event, create a
tool only PMU where the events/aliases match the existing
duration_time, user_time and system_time events. Remove special
parsing and printing support for the tool events, but add function
calls for when PMU functions are called on a tool_pmu.
Move the tool PMU code in evsel into tool_pmu.c to better encapsulate
the tool event behavior in that file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Hard coded terms like "config=10" are skipped by perf_pmu__config
assuming they were already applied to a perf_event_attr by parse
event's config_attr function. When doing a reverse number to name
lookup in perf_pmu__name_from_config, as the hardcoded terms aren't
applied the config value is incorrect leading to misses or false
matches. Fix this by adding a parameter to have perf_pmu__config apply
hardcoded terms too (not just in parse event's config_term_common).
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use ifs rather than ?: to avoid a large compound statement.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241002032016.333748-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use PMU interface to better detect core PMU for legacy events. Look
for slots event on core PMU if it is appropriate for the event.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-5-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are cases where we want to match events like instructions and
cycles with legacy hardware values, in particular in stat-shadow's
hard coded metrics. An evsel's name isn't a good point of reference as
it gets altered, strstr would be too imprecise and re-parsing the
event from its name is silly. Instead, hold the legacy hardware event
name, determined during parsing, in the evsel for this matching case.
Inline evsel__match2 that is only used in builtin-diff.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
All PMU events are assumed to be "Kernel PMU event", however, this
isn't true for fake PMUs and won't be true with the addition of more
software PMUs. Make the PMU's type description name configurable -
largely for printing callbacks.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240907050830.6752-5-irogers@google.com
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Rather than passing a fake PMU around, just pass that the fake PMU
should be used - true when doing testing. Move the fake PMU into
pmus.[ch] and try to abstract the PMU's properties in pmu.c, ie so
there is less "if fake_pmu" in non-PMU code. Give the fake PMU a made
up type number.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240907050830.6752-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge perf_pmu__parse_per_pkg() and perf_pmu__parse_snapshot() that do the
same parsing except for the file suffix used.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20240718003025.1486232-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
evsel__is_aux_event() identifies AUX area tracing selected events.
S390_CPUMSF uses a raw event type (PERF_TYPE_RAW - refer
s390_cpumsf_evsel_is_auxtrace()) not a PMU type value that could be checked
in evsel__is_aux_event(). However it sets needs_auxtrace_mmap (refer
auxtrace_record__init()), so check that first.
Currently, the features that use evsel__is_aux_event() are used only by
Intel PT, but that may change in the future.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240715160712.127117-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
./tools/perf/util/pmu.c:1776:49-50: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9443
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240628053049.44521-1-yang.lee@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Arm PMUs have a suffix, either a single decimal (armv8_pmuv3_0) or 3 hex
digits which (armv8_cortex_a53) which Perf assumes are both strippable
suffixes for the purposes of deduplication. S390 "cpum_cf" is a
similarly suffixed core PMU but is only two characters so is not treated
as strippable because the rules are a minimum of 3 hex characters or 1
decimal character.
There are two paths involved in listing PMU events:
* HW/cache event printing assumes core PMUs don't have suffixes so
doesn't try to strip.
* Sysfs PMU events share the printing function with uncore PMUs which
strips.
This results in slightly inconsistent Perf list behavior if a core PMU
has a suffix:
# perf list
...
armv8_pmuv3_0/branch-load-misses/
armv8_pmuv3/l3d_cache_wb/ [Kernel PMU event]
...
Fix it by partially reverting back to the old list behavior where
stripping was only done for uncore PMUs. For example commit 8d9f5146f5da
("perf pmus: Sort pmus by name then suffix") mentions that only PMUs
starting 'uncore_' are considered to have a potential suffix. This
change doesn't go back that far, but does only strip PMUs that are
!is_core. This keeps the desirable behavior where the many possibly
duplicated uncore PMUs aren't repeated, but it doesn't break listing for
core PMUs.
Searching for a PMU continues to use the new stripped comparison
functions, meaning that it's still possible to request an event by
specifying the common part of a PMU name, or even open events on
multiple similarly named PMUs. For example:
# perf stat -e armv8_cortex/inst_retired/
5777173628 armv8_cortex_a53/inst_retired/ (99.93%)
7469626951 armv8_cortex_a57/inst_retired/ (49.88%)
Fixes: 3241d46f5f54 ("perf pmus: Sort/merge/aggregate PMUs like mrvl_ddr_pmu")
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: robin.murphy@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240626145448.896746-3-james.clark@arm.com
|
|
Commit b2b9d3a3f021 ("perf pmu: Support wildcards on pmu name in dynamic
pmu events") gives the following example for wildcarding a subset of
PMUs:
E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
perf stat -e mypmu_[01]/<config>/
Since commit f91fa2ae6360 ("perf pmu: Refactor perf_pmu__match()"), only
"*" has been supported, removing the ability to subset PMUs, even though
parse-events.l still supports ? and [] characters.
Fix it by using fnmatch() when any glob character is detected and add a
test which covers that and other scenarios of
perf_pmu__match_ignoring_suffix().
Fixes: f91fa2ae6360 ("perf pmu: Refactor perf_pmu__match()")
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: robin.murphy@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240626145448.896746-2-james.clark@arm.com
|
|
The mrvl_ddr_pmu is uncore and has a hexadecimal address suffix while
the previous PMU sorting/merging code assumes uncore PMU names start
with uncore_ and have a decimal suffix. Because of the previous
assumption it isn't possible to wildcard the mrvl_ddr_pmu.
Modify pmu_name_len_no_suffix but also remove the suffix number out
argument, this is because we don't know if a suffix number of say 100
is in hexadecimal or decimal. As the only use of the suffix number is
in comparisons, it is safe there to compare the values as hexadecimal.
Modify perf_pmu__match_ignoring_suffix so that hexadecimal suffixes
are ignored.
Only allow hexadecimal suffixes to be greater than length 2 (ie 3 or
more) so that S390's cpum_cf PMU doesn't lose its suffix.
Change the return type of pmu_name_len_no_suffix to size_t to
workaround GCC incorrectly determining the result could be negative.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: Bhaskara Budiredla <bbudiredla@marvell.com>
Cc: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515060114.3268149-2-irogers@google.com
|
|
Sys events are eagerly loaded as each event has a compat option that may
mean the event is or isn't associated with the PMU.
These shouldn't be counted as loaded_json_events as that is used for
JSON events matching the CPUID that may or may not have been loaded. The
mismatch causes issues on ARM64 that uses sys events.
Fixes: e6ff1eed3584362d ("perf pmu: Lazily add JSON events")
Closes: https://lore.kernel.org/lkml/20240510024729.1075732-1-justin.he@arm.com/
Reported-by: Jia He <justin.he@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240511003601.2666907-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
