| Age | Commit message (Collapse) | Author |
|---|
|
Add cs_dsp_mock_bin_add_patch_off32(). This is the same as
cs_dsp_mock_bin_add_patch() except that it puts the offset in the
new 32-bit offset field and modifies the block type to indicate
that it uses the long offset.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an argument to cs_dsp_mock_bin_add_raw_block() to pass a 32-bit
offset, and change the type of the existing offset argument to u16.
The cs_dsp_test_bin_error.c test uses cs_dsp_mock_bin_add_raw_block()
so it needs corresponding updates to pass 0 as the 32-bit offset.
Version 1 and 2 of the bin file format had a 16-bit offset on blocks
and the sample rate field of the blocks was not used. Version 3 adds
new block types that change the old sample rate field to be a 32-bit
offset with the old offset currently unused.
cs_dsp_mock_bin_add_raw_block() doesn't attempt to do any magic - its
purpose is to create a raw block exactly as specified by the calling
test code. So the test case can pass a value for both offset fields.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use correct kernel-doc format to avoid kernel-doc warnings in
nclude/linux/firmware/cirrus/cs_dsp_test_utils.h:
- mark one struct member as private: since the comment says that it is
private
- add ending ':' to struct members where needed
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:30 struct
member 'saw_bus_write' not described in 'cs_dsp_test'
Warning: include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'id' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ver' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'xm_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'ym_size_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_base_words' not described in 'cs_dsp_mock_alg_def'
Warning: ../include/linux/firmware/cirrus/cs_dsp_test_utils.h:53 struct
member 'zm_size_words' not described in 'cs_dsp_mock_alg_def'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251104192653.929157-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Call cs_dsp_mock_xm_header_get_fw_version() to get the firmware version
from the dummy XM header data in cs_dsp_bin_err_test_common_init().
Make the same change to cs_dsp_bin_test_common_init() and remove the
cs_dsp_mock_xm_header_get_fw_version_from_regmap() function.
The code in cs_dsp_test_bin.c was correctly calling
cs_dsp_mock_xm_header_get_fw_version_from_regmap() to fetch the fw version
from a dummy header it wrote to XM registers. However in
cs_dsp_test_bin_error.c the test doesn't stuff a dummy header into XM, it
populates it the normal way using a wmfw file. It should have called
cs_dsp_mock_xm_header_get_fw_version() to get the data from its blob
buffer, but was calling cs_dsp_mock_xm_header_get_fw_version_from_regmap().
As nothing had been written to the registers this returned the value of
uninitialized data.
The only other use of cs_dsp_mock_xm_header_get_fw_version_from_regmap()
was cs_dsp_test_bin.c, but it doesn't need to use it. It already has a
blob buffer containing the dummy XM header so it can use
cs_dsp_mock_xm_header_get_fw_version() to read from that.
Fixes: cd8c058499b6 ("firmware: cs_dsp: Add KUnit testing of bin error cases")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250410132129.1312541-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test bin file.
The data payload in a bin is an opaque blob, so the mock bin only needs
to generate the appropriate file header and description block for each
payload blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock firmware file that emulates what the firmware build tools
would normally create. This will be used by KUnit tests to generate a
test wmfw file.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions to implement an emulation of the DSP memory map.
There are three main groups of functionality:
1. Define a mock cs_dsp_region table.
2. Calculate the addresses of memory and algorithms from the firmware
header in XM.
3. Build a mock XM header in emulated XM.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a mock regmap implementation to act as a simulated DSP for KUnit
testing. This is built as a utility module so that it could be used by
clients of cs_dsp to create a mock "DSP" for their own testing.
cs_dsp interacts with the DSP only through registers. Most of the
register space of the DSP is RAM. ADSP cores have a small set of control
registers. HALO Core DSPs have a much larger set of control registers but
only a small subset are used.
Most writes are "blind" in the sense that cs_dsp does not expect to
receive any sort of response from the DSP. So there isn't any need to
emulate a "DSP", only a set of registers that can be written and read
back.
The idea of the mock regmap is to use the cache to accumulate writes
which can then be tested against the values that are expected to be in
the registers.
Stray writes can be detected by dropping the cache entries for all
addresses that should have been written and then issuing a regcache_sync().
If this causes bus writes it means there were writes to unexpected
registers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20241212143725.1381013-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
