| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes, feature updates:
- when using block size > page size, enable direct IO
- fallback to buffered IO if the data profile has duplication,
workaround to avoid checksum mismatches on block group profiles
with redundancy, real direct IO is possible on single or RAID0
- redo export of zoned statistics, moved from sysfs to
/proc/pid/mountstats due to size limitations of the former
Experimental features:
- remove offload checksum tunable, intended to find best way to do it
but since we've switched to offload to thread for everything we
don't need it anymore
- initial support for remap-tree feature, a translation layer of
logical block addresses that allow changes without moving/rewriting
blocks to do eg. relocation, or other changes that require COW
Notable fixes:
- automatic removal of accidentally leftover chunks when
free-space-tree is enabled since mkfs.btrfs v6.16.1
- zoned mode:
- do not try to append to conventional zones when RAID is mixing
zoned and conventional drives
- fixup write pointers when mixing zoned and conventional on
DUP/RAID* profiles
- when using squota, relax deletion rules for qgroups with 0 members
to allow easier recovery from accounting bugs, also add more checks
to detect bad accounting
- fix periodic reclaim scanning, properly check boundary conditions
not to trigger it unexpectedly or miss the time to run it
- trim:
- continue after first error
- change reporting to the first detected error
- add more cancellation points
- reduce contention of big device lock that can block other
operations when there's lots of trimmed space
- when chunk allocation is forced (needs experimental build) fix
transaction abort when unexpected space layout is detected
Core:
- switch to crypto library API for checksumming, removed module
dependencies, pointer indirections, etc.
- error handling improvements
- adjust how and where transaction commit or abort are done and are
maybe not necessary
- minor compression optimization to skip single block ranges
- improve how compression folios are handled
- new and updated selftests
- cleanups, refactoring:
- auto-freeing and other automatic variable cleanup conversion
- structure size optimizations
- condition annotations"
* tag 'for-6.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits)
btrfs: get rid of compressed_bio::compressed_folios[]
btrfs: get rid of compressed_folios[] usage for encoded writes
btrfs: get rid of compressed_folios[] usage for compressed read
btrfs: remove the old btrfs_compress_folios() infrastructure
btrfs: switch to btrfs_compress_bio() interface for compressed writes
btrfs: introduce btrfs_compress_bio() helper
btrfs: zlib: introduce zlib_compress_bio() helper
btrfs: zstd: introduce zstd_compress_bio() helper
btrfs: lzo: introduce lzo_compress_bio() helper
btrfs: zoned: factor out the zone loading part into a testable function
btrfs: add cleanup function for btrfs_free_chunk_map
btrfs: tests: add cleanup functions for test specific functions
btrfs: raid56: fix memory leak of btrfs_raid_bio::stripe_uptodate_bitmap
btrfs: tests: add unit tests for pending extent walking functions
btrfs: fix EEXIST abort due to non-consecutive gaps in chunk allocation
btrfs: fix transaction commit blocking during trim of unallocated space
btrfs: handle user interrupt properly in btrfs_trim_fs()
btrfs: preserve first error in btrfs_trim_fs()
btrfs: continue trimming remaining devices on failure
btrfs: do not BUG_ON() in btrfs_remove_block_group()
...
|
|
Some functions (__btrfs_ioctl_snap_create(), btrfs_ioctl_subvol_setflags()
and copy_to_sk()) have an 'out' label that does nothing but return, making
it pointless. Simplify this by removing the label and returning instead of
gotos plus setting up the 'ret' variable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of surrounding every caller of btrfs_is_shutdown() with unlikely,
move the unlikely into the helper itself, like we do in other places in
btrfs and is common in the kernel outside btrfs too. Also make the fs_info
argument of btrfs_is_shutdown() const.
On a x86_84 box using gcc 14.2.0-19 from Debian, this resulted in a slight
reduction of the module's text size.
Before:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1939044 172568 15592 2127204 207564 fs/btrfs/btrfs.ko
After:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1938876 172568 15592 2127036 2074bc fs/btrfs/btrfs.ko
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is no longer the need to use btrfs_may_create(), which was a copy
of the VFS private function may_create(), since now that functionality
is exported by the VFS as a function named may_create_dentry(). So change
btrfs_mksubvol() to use the VFS function and remove btrfs_may_create().
Note that the btrfs copy was missing an audit_inode_child() call that we
have in the VFS function. This only reinforces the need to use a common
function, as it's very easy for the btrfs copy to get out of sync and
therefore a maintenance burden.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Link: https://patch.msgid.link/adf8c802c77ec1c855ea9fe12491120ccc29a294.1768307858.git.fdmanana@suse.com
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There is no longer the need to use btrfs_may_delete(), which was a copy
of the VFS private function may_delete(), since now that functionality
is exported by the VFS as a function named may_delete_dentry(). In fact
our local copy of may_delete() lacks an update that happened to that
function which is point number 7 in that function's comment:
"7. If the victim has an unknown uid or gid we can't change the inode."
which corresponds to this code:
/* Inode writeback is not safe when the uid or gid are invalid. */
if (!vfsuid_valid(i_uid_into_vfsuid(idmap, inode)) ||
!vfsgid_valid(i_gid_into_vfsgid(idmap, inode)))
return -EOVERFLOW;
As long as we keep a separate copy, duplicating code, we are also prone
to updates to the VFS being missed in our local copy.
So change btrfs_ioctl_snap_destroy() to use the VFS function and remove
btrfs_may_delete().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Link: https://patch.msgid.link/46b13dc5c957deb72a7f085916757a20878a8e73.1768307858.git.fdmanana@suse.com
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- shutdown ioctl support (needs CONFIG_BTRFS_EXPERIMENTAL for now):
- set filesystem state as being shut down (also named going down
in other filesystems), where all active operations return EIO
and this cannot be changed until unmount
- pending operations are attempted to be finished but error
messages may still show up depending on where exactly the
shutdown happened
- scrub (and device replace) vs suspend/hibernate:
- a running scrub will prevent suspend, which can be annoying as
suspend is an immediate request and scrub is not critical
- filesystem freezing before suspend was not sufficient as the
problem was in process freezing
- behaviour change: on suspend scrub and device replace are
cancelled, where scrub can record the last state and continue
from there; the device replace has to be restarted from the
beginning
- zone stats exported in sysfs, from the perspective of the
filesystem this includes active, reclaimable, relocation etc zones
Performance:
- improvements when processing space reservation tickets by
optimizing locking and shrinking critical sections, cumulative
improvements in lockstat numbers show +15%
Notable fixes:
- use vmalloc fallback when allocating bios as high order allocations
can happen with wide checksums (like sha256)
- scrub will always track the last position of progress so it's not
starting from zero after an error
Core:
- under experimental config, checksum calculations are offloaded to
process context, simplifies locking and allows to remove
compression write worker kthread(s):
- speed improvement in direct IO throughput with buffered IO
fallback is +15% when not offloaded but this is more related to
internal crypto subsystem improvements
- this will be probably default in the future removing the sysfs
tunable
- (experimental) block size > page size updates:
- support more operations when not using large folios (encoded
read/write and send)
- raid56
- more preparations for fscrypt support
Other:
- more conversions to auto-cleaned variables
- parameter cleanups and removals
- extended warning fixes
- improved printing of structured values like keys
- lots of other cleanups and refactoring"
* tag 'for-6.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: remove unnecessary inode key in btrfs_log_all_parents()
btrfs: remove redundant zero/NULL initializations in btrfs_alloc_root()
btrfs: remaining BTRFS_PATH_AUTO_FREE conversions
btrfs: send: do not allocate memory for xattr data when checking it exists
btrfs: send: add unlikely to all unexpected overflow checks
btrfs: reduce arguments to btrfs_del_inode_ref_in_log()
btrfs: remove root argument from btrfs_del_dir_entries_in_log()
btrfs: use test_and_set_bit() in btrfs_delayed_delete_inode_ref()
btrfs: don't search back for dir inode item in INO_LOOKUP_USER
btrfs: don't rewrite ret from inode_permission
btrfs: add orig_logical to btrfs_bio for encryption
btrfs: disable verity on encrypted inodes
btrfs: disable various operations on encrypted inodes
btrfs: remove redundant level reset in btrfs_del_items()
btrfs: simplify leaf traversal after path release in btrfs_next_old_leaf()
btrfs: optimize balance_level() path reference handling
btrfs: factor out root promotion logic into promote_child_to_root()
btrfs: raid56: remove the "_step" infix
btrfs: raid56: enable bs > ps support
btrfs: raid56: prepare finish_parity_scrub() to support bs > ps cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Unify how task_work cancelations are detected, placing it in the
task_work running state rather than needing to check the task state
- Series cleaning up and moving the cancelation code to where it
belongs, in cancel.c
- Cleanup of waitid and futex argument handling
- Add support for mixed sized SQEs. 6.18 added support for mixed sized
CQEs, improving flexibility and efficiency of workloads that need big
CQEs. This adds similar support for SQEs, where the occasional need
for a 128b SQE doesn't necessitate having all SQEs be 128b in size
- Introduce zcrx and SQ/CQ layout queries. The former returns what zcrx
features are available. And both return the ring size information to
help with allocation size calculation for user provided rings like
IORING_SETUP_NO_MMAP and IORING_MEM_REGION_TYPE_USER
- Zcrx updates for 6.19. It includes a bunch of small patches,
IORING_REGISTER_ZCRX_CTRL and RQ flushing and David's work on sharing
zcrx b/w multiple io_uring instances
- Series cleaning up ring initializations, notable deduplicating ring
size and offset calculations. It also moves most of the checking
before doing any allocations, making the code simpler
- Add support for getsockname and getpeername, which is mostly a
trivial hookup after a bit of refactoring on the networking side
- Various fixes and cleanups
* tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring: Introduce getsockname io_uring cmd
socket: Split out a getsockname helper for io_uring
socket: Unify getsockname and getpeername implementation
io_uring/query: drop unused io_handle_query_entry() ctx arg
io_uring/kbuf: remove obsolete buf_nr_pages and update comments
io_uring/register: use correct location for io_rings_layout
io_uring/zcrx: share an ifq between rings
io_uring/zcrx: add io_fill_zcrx_offsets()
io_uring/zcrx: export zcrx via a file
io_uring/zcrx: move io_zcrx_scrub() and dependencies up
io_uring/zcrx: count zcrx users
io_uring/zcrx: add sync refill queue flushing
io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL
io_uring/zcrx: elide passing msg flags
io_uring/zcrx: use folio_nr_pages() instead of shift operation
io_uring/zcrx: convert to use netmem_desc
io_uring/query: introduce rings info query
io_uring/query: introduce zcrx query
io_uring: move cq/sq user offset init around
io_uring: pre-calculate scq layout
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory locking updates from Christian Brauner:
"This contains the work to add centralized APIs for directory locking
operations.
This series is part of a larger effort to change directory operation
locking to allow multiple concurrent operations in a directory. The
ultimate goal is to lock the target dentry(s) rather than the whole
parent directory.
To help with changing the locking protocol, this series centralizes
locking and lookup in new helper functions. The helpers establish a
pattern where it is the dentry that is being locked and unlocked
(currently the lock is held on dentry->d_parent->d_inode, but that can
change in the future).
This also changes vfs_mkdir() to unlock the parent on failure, as well
as dput()ing the dentry. This allows end_creating() to only require
the target dentry (which may be IS_ERR() after vfs_mkdir()), not the
parent"
* tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nfsd: fix end_creating() conversion
VFS: introduce end_creating_keep()
VFS: change vfs_mkdir() to unlock on failure.
ecryptfs: use new start_creating/start_removing APIs
Add start_renaming_two_dentries()
VFS/ovl/smb: introduce start_renaming_dentry()
VFS/nfsd/ovl: introduce start_renaming() and end_renaming()
VFS: add start_creating_killable() and start_removing_killable()
VFS: introduce start_removing_dentry()
smb/server: use end_removing_noperm for for target of smb2_create_link()
VFS: introduce start_creating_noperm() and start_removing_noperm()
VFS/nfsd/cachefiles/ovl: introduce start_removing() and end_removing()
VFS/nfsd/cachefiles/ovl: add start_creating() and end_creating()
VFS: tidy up do_unlinkat()
VFS: introduce start_dirop() and end_dirop()
debugfs: rename end_creating() to debugfs_end_creating()
|
|
Do the remaining btrfs_path conversion to the auto cleaning, this seems
to be the last one. Most of the conversions are trivial, only adding the
declaration and removing the freeing, or changing the goto patterns to
return.
There are some functions with many changes, like __btrfs_free_extent(),
btrfs_remove_from_free_space_tree() or btrfs_add_to_free_space_tree()
but it still follows the same pattern.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't need to search back to the inode item, the directory inode
number is in key.offset, so simply use that. If we can't find the
directory we'll get an ENOENT at the iget().
Note: The patch was taken from v5 of fscrypt patchset
(https://lore.kernel.org/linux-btrfs/cover.1706116485.git.josef@toxicpanda.com/)
which was handled over time by various people: Omar Sandoval, Sweet Tea
Dorminy, Josef Bacik.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In our user safe ino resolve ioctl we'll just turn any ret into -EACCES
from inode_permission(). This is redundant, and could potentially be
wrong if we had an ENOMEM in the security layer or some such other
error, so simply return the actual return value.
Note: The patch was taken from v5 of fscrypt patchset
(https://lore.kernel.org/linux-btrfs/cover.1706116485.git.josef@toxicpanda.com/)
which was handled over time by various people: Omar Sandoval, Sweet Tea
Dorminy, Josef Bacik.
Fixes: 23d0b79dfaed ("btrfs: Add unprivileged version of ino_lookup ioctl")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since the read verification and read repair are all supporting bs > ps
without large folios now, we can enable encoded read/write/send.
Now we can relax the alignment in assert_bbio_alignment() to
min(blocksize, PAGE_SIZE).
But also add the extra blocksize based alignment check for the logical
and length of the bbio.
There is a pitfall in btrfs_add_compress_bio_folios(), which relies on
the folios passed in to meet the minimal folio order.
But now we can pass regular page sized folios in, update it to check
each folio's size instead of using the minimal folio size.
This allows btrfs_add_compress_bio_folios() to even handle folios array
with different sizes, thankfully we don't yet need to handle such crazy
situation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Apply the AUTO_KFREE and AUTO_KVFREE macros wherever it makes
sense. Since this macro is expected to improve code readability, it has
been avoided in places where the lifetime of objects wasn't easy to
follow and a cleanup attribute would've made things worse; or when the
cleanup section of a function involved many other things and thus there
was no readability impact anyways. This change has also not been applied
in extremely short functions where readability was clearly not an issue.
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The free_ipath() function was being used as a cleanup function
everywhere. Declare it via DEFINE_FREE() so we can use this function
with the __free() helper.
The name has also been adjusted so it's closer to the type's name.
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The shutdown ioctl should follow the XFS one, which use magic number 'X',
and ioctl number 125, with a uint32 as flags.
For now btrfs don't distinguish DEFAULT and LOGFLUSH flags (just like
f2fs), both will freeze the fs first (implies committing the current
transaction), setting the SHUTDOWN flag and finally thaw the fs.
For NOLOGFLUSH flag, the freeze/thaw part is skipped thus the current
transaction is aborted.
The new shutdown ioctl is hidden behind experimental features for more
testing.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <asj@kernel.org>
Tested-by: Anand Jain <asj@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A new fs state EMERGENCY_SHUTDOWN is introduced, which is btrfs'
equivalent of XFS_IOC_GOINGDOWN or EXT4_IOC_SHUTDOWN, after entering
emergency shutdown state, all operations will return errors (-EIO), and
can not be bring back to normal state until unmouont.
The new state will reject the following file operations:
- read_iter()
- write_iter()
- mmap()
- open()
- remap_file_range()
- uring_cmd()
- splice_read()
This requires a small wrapper to do the extra shutdown check, then call
the regular filemap_splice_read() function
This should reject most of the file operations on a shutdown btrfs.
And for the existing dirty folios, extra shutdown checks are introduced
to the following functions:
- run_delalloc_nocow()
- run_delalloc_compressed()
- cow_file_range()
So that dirty ranges will still be properly cleaned without being
submitted.
Finally the shutdown state will also set the fs error, so that no new
transaction will be committed, protecting the metadata from any possible
further corruption.
And when the fs entered shutdown mode for the first time, a critical
level kernel message will show up to indicate the incident.
That message will be important for end users as rejected delalloc ranges
will output error messages, hopefully that shutdown message and the fact
that all fs operations are returning error will prevent end users from
getting too confused about the delalloc error messages.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <asj@kernel.org>
Tested-by: Anand Jain <asj@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
vfs_mkdir() already drops the reference to the dentry on failure but it
leaves the parent locked.
This complicates end_creating() which needs to unlock the parent even
though the dentry is no longer available.
If we change vfs_mkdir() to unlock on failure as well as releasing the
dentry, we can remove the "parent" arg from end_creating() and simplify
the rules for calling it.
Note that cachefiles_get_directory() can choose to substitute an error
instead of actually calling vfs_mkdir(), for fault injection. In that
case it needs to call end_creating(), just as vfs_mkdir() now does on
error.
ovl_create_real() will now unlock on error. So the conditional
end_creating() after the call is removed, and end_creating() is called
internally on error.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-15-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
These are similar to start_creating() and start_removing(), but allow a
fatal signal to abort waiting for the lock.
They are used in btrfs for subvol creation and removal.
btrfs_may_create() no longer needs IS_DEADDIR() and
start_creating_killable() includes that check.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-10-neilb@ownmail.net
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
io_uring task work dispatch makes an indirect call to struct io_kiocb's
io_task_work.func field to allow running arbitrary task work functions.
In the uring_cmd case, this calls io_uring_cmd_work(), which immediately
makes another indirect call to struct io_uring_cmd's task_work_cb field.
Change the uring_cmd task work callbacks to functions whose signatures
match io_req_tw_func_t. Add a function io_uring_cmd_from_tw() to convert
from the task work's struct io_tw_req argument to struct io_uring_cmd *.
Define a constant IO_URING_CMD_TASK_WORK_ISSUE_FLAGS to avoid
manufacturing issue_flags in the uring_cmd task work callbacks. Now
uring_cmd task work dispatch makes a single indirect call to the
uring_cmd implementation's callback. This also allows removing the
task_work_cb field from struct io_uring_cmd, freeing up 8 bytes for
future storage.
Since fuse_uring_send_in_task() now has access to the io_tw_token_t,
check its cancel field directly instead of relying on the
IO_URING_F_TASK_DEAD issue flag.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in tree-checker fix extref bounds check
- reorder send context structure to avoid
-Wflex-array-member-not-at-end warning
- fix extent readahead length for compressed extents
- fix memory leaks on error paths (qgroup assign ioctl, zone loading
with raid stripe tree enabled)
- fix how device specific mount options are applied, in particular the
'ssd' option will be set unexpectedly
- fix tracking of relocation state when tasks are running and
cancellation is attempted
- adjust assertion condition for folios allocated for scrub
- remove incorrect assertion checking for block group when populating
free space tree
* tag 'for-6.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: fix -Wflex-array-member-not-at-end warning in struct send_ctx
btrfs: tree-checker: fix bounds check in check_inode_extref()
btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST
btrfs: fix incorrect readahead expansion length
btrfs: do not assert we found block group item when creating free space tree
btrfs: do not use folio_test_partial_kmap() in ASSERT()s
btrfs: only set the device specific options after devices are opened
btrfs: fix memory leak on duplicated memory in the qgroup assign ioctl
btrfs: fix clearing of BTRFS_FS_RELOC_RUNNING if relocation already running
|
|
On 'btrfs_ioctl_qgroup_assign' we first duplicate the argument as
provided by the user, which is kfree'd in the end. But this was not the
case when allocating memory for 'prealloc'. In this case, if it somehow
failed, then the previous code would go directly into calling
'mnt_drop_write_file', without freeing the string duplicated from the
user space.
Fixes: 4addc1ffd67a ("btrfs: qgroup: preallocate memory before adding a relation")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
|
|
The unlikely() annotation is a static prediction hint that compiler may
use to reorder code out of hot path. We use it elsewhere (namely
tree-checker.c) for error branches that almost never happen.
Transaction abort is one such error, the btrfs_abort_transaction()
inlines code to check the state and print a warning, this ought to be
out of the hot path.
The most common pattern is when transaction abort is called after
checking a return value and the control flow leads to a quick return.
In other cases it may not be necessary to add unlikely() e.g. when the
function returns anyway or the control flow is not changed noticeably.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The unlikely() annotation is a static prediction hint that compiler may
use to reorder code out of hot path. We use it elsewhere (namely
tree-checker.c) for error branches that almost never happen, where
EUCLEAN (a corruption) is one of them.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
With all the preparation patches, we're able to finally enable btrfs
block size (sector size) larger than page size support and give it a
full fstests run.
And obviously this new feature is hidden behind experimental flags, and
should not be considered as a core feature yet as btrfs' default block
size is still 4K.
But this is still a feature that will shine in the future where 16K
block sized device are widely adopted.
For now there are some features explicitly disabled:
- Direct IO
This is the most complex part to support, the root reason is we can
not control the pages of iov iter passed in.
User space programs can only ensure the virtual addresses are
contiguous, but have no control on their physical addresses.
Our bs > ps support heavily relies on large folios, and direct IO
memory can easily break it.
So direct IO is disabled and will always fall back to buffered IO.
- RAID56
In theory we can convert RAID56 to use large folios, but it will need
to be converted back to page based if we want to support direct IO in
the future.
So just reject it for now.
- Encoded send
- Encoded read
Both are utilizing btrfs_encoded_read_regular_fill_pages(), and send
is utilizing vmallocated memory.
Unfortunately for vmallocated memory we can not guarantee the minimal
folio order.
For send, it will just always fallback to regular writes, which reads
from page cache and will follow the existing folio order requirement.
- Encoded write
Encoded write itself is allocating pages by themselves, and we can
easily change it to follow the minimal order.
But since encoded read is already disabled, there is no need to only
enable encoded write.
Finally just like what we did for bs < ps support in the past, add a
warning message for bs > ps mounts.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Annual typo fixing pass. Strangely codespell found only about 30% of
what is in this patch, the rest was done manually using text
spellchecker with a custom dictionary of acceptable terms.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 79525b51acc1 ("io_uring: fix nvme's 32b cqes on mixed cq") split
out a separate io_uring_cmd_done32() helper for ->uring_cmd()
implementations that return 32-byte CQEs. The res2 value passed to
io_uring_cmd_done() is now unused because __io_uring_cmd_done() ignores
it when is_cqe32 is passed as false. So drop the parameter from
io_uring_cmd_done() to simplify the callers and clarify that it's not
possible to return an extra value beyond the 32-bit CQE result.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're almost done cleaning misused int/bool parameters. Convert a bunch
of them, found by manual grepping. Note that btrfs_sync_fs() needs an
int as it's mandated by the struct super_operations prototype.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Pull io_uring updates from Jens Axboe:
- Optimization to avoid reference counts on non-cloned registered
buffers. This is how these buffers were handled prior to having
cloning support, and we can still use that approach as long as the
buffers haven't been cloned to another ring.
- Cleanup and improvement for uring_cmd, where btrfs was the only user
of storing allocated data for the lifetime of the uring_cmd. Clean
that up so we can get rid of the need to do that.
- Avoid unnecessary memory copies in uring_cmd usage. This is
particularly important as a lot of uring_cmd usage necessitates the
use of 128b SQEs.
- A few updates for recv multishot, where it's now possible to add
fairness limits for limiting how much is transferred for each retry
loop. Additionally, recv multishot now supports an overall cap as
well, where once reached the multishot recv will terminate. The
latter is useful for buffer management and juggling many recv streams
at the same time.
- Add support for returning the TX timestamps via a new socket command.
This feature can work in either singleshot or multishot mode, where
the latter triggers a completion whenever new timestamps are
available. This is an alternative to using the existing error queue.
- Add support for an io_uring "mock" file, which is the start of being
able to do 100% targeted testing in terms of exercising io_uring
request handling. The idea is to have a file type that can be
anything the tester would like, and behave exactly how you want it to
behave in terms of hitting the code paths you want.
- Improve zcrx by using sgtables to de-duplicate and improve dma
address handling.
- Prep work for supporting larger pages for zcrx.
- Various little improvements and fixes.
* tag 'for-6.17/io_uring-20250728' of git://git.kernel.dk/linux: (42 commits)
io_uring/zcrx: fix leaking pages on sg init fail
io_uring/zcrx: don't leak pages on account failure
io_uring/zcrx: fix null ifq on area destruction
io_uring: fix breakage in EXPERT menu
io_uring/cmd: remove struct io_uring_cmd_data
btrfs/ioctl: store btrfs_uring_encoded_data in io_btrfs_cmd
io_uring/cmd: introduce IORING_URING_CMD_REISSUE flag
io_uring/zcrx: account area memory
io_uring: export io_[un]account_mem
io_uring/net: Support multishot receive len cap
io_uring: deduplicate wakeup handling
io_uring/net: cast min_not_zero() type
io_uring/poll: cleanup apoll freeing
io_uring/net: allow multishot receive per-invocation cap
io_uring/net: move io_sr_msg->retry_flags to io_sr_msg->flags
io_uring/net: use passed in 'len' in io_recv_buf_select()
io_uring/zcrx: prepare fallback for larger pages
io_uring/zcrx: assert area type in io_zcrx_iov_page
io_uring/zcrx: allocate sgtable for umem areas
io_uring/zcrx: introduce io_populate_area_dma
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fileattr updates from Christian Brauner:
"This introduces the new file_getattr() and file_setattr() system calls
after lengthy discussions.
Both system calls serve as successors and extensible companions to
the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have
started to show their age in addition to being named in a way that
makes it easy to conflate them with extended attribute related
operations.
These syscalls allow userspace to set filesystem inode attributes on
special files. One of the usage examples is the XFS quota projects.
XFS has project quotas which could be attached to a directory. All new
inodes in these directories inherit project ID set on parent
directory.
The project is created from userspace by opening and calling
FS_IOC_FSSETXATTR on each inode. This is not possible for special
files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left
with empty project ID. Those inodes then are not shown in the quota
accounting but still exist in the directory. This is not critical but
in the case when special files are created in the directory with
already existing project quota, these new inodes inherit extended
attributes. This creates a mix of special files with and without
attributes. Moreover, special files with attributes don't have a
possibility to become clear or change the attributes. This, in turn,
prevents userspace from re-creating quota project on these existing
files.
In addition, these new system calls allow the implementation of
additional attributes that we couldn't or didn't want to fit into the
legacy ioctls anymore"
* tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: tighten a sanity check in file_attr_to_fileattr()
tree-wide: s/struct fileattr/struct file_kattr/g
fs: introduce file_getattr and file_setattr syscalls
fs: prepare for extending file_get/setattr()
fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP
selinux: implement inode_file_[g|s]etattr hooks
lsm: introduce new hooks for setting/getting inode fsxattr
fs: split fileattr related helpers into separate file
|
|
Currently the defrag ioctl cannot rewrite the extents without
compression. Add a new flag for that, as setting compression to 0 (or
"no compression") means to do no changes to compression so take what is
the current default, like mount options or properties.
The defrag setting overrides mount or properties. The compression
BTRFS_DEFRAG_DONT_COMPRESS is only used for in-memory operations and
does not need to have a fixed value.
Mount with zstd:9, copy test file from /usr/bin/ (about 260KB):
$ mount -o compress=zstd:9 /dev/vda /mnt
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 13312.. 13439: 128: encoded
1: 128.. 255: 13364.. 13491: 128: 13440: encoded
2: 256.. 291: 13424.. 13459: 36: 13492: last,encoded,eof
testfile: 3 extents found
$ compsize testfile
Processed 1 file, 3 regular extents (3 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 42% 124K 292K 292K
zstd 42% 124K 292K 292K
Defrag to uncompressed:
$ btrfs fi defrag --nocomp testfile
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 291: 291840.. 292131: 292: last,eof
testfile: 1 extent found
$ compsize testfile
Processed 1 file, 1 regular extents (1 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 100% 292K 292K 292K
none 100% 292K 292K 292K
Compress again with LZO:
$ btrfs fi defrag -clzo testfile
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 13312.. 13439: 128: encoded
1: 128.. 255: 13392.. 13519: 128: 13440: encoded
2: 256.. 291: 13480.. 13515: 36: 13520: last,encoded,eof
testfile: 3 extents found
$ compsize testfile
Processed 1 file, 3 regular extents (3 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 64% 188K 292K 292K
lzo 64% 188K 292K 292K
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no point in checking at iterate_inodes_from_logical() if the path
has search_commit_root set, the only caller never sets search_commit_root
to true and it doesn't make sense for it ever to be true for the current
use case (logical_to_ino ioctl). So stop checking for that and since the
only caller allocates the path just for it to be used by
iterate_inodes_from_logical(), move the path allocation into that function.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a publicly exported btrfs_qgroup_enabled() and an ioctl.c private
qgroup_enabled() helper. Both of these test if qgroups are enabled, the
first check if the flag BTRFS_FS_QUOTA_ENABLED is set in fs_info->flags
while the second checks if fs_info->quota_root is not NULL while holding
the mutex fs_info->qgroup_ioctl_lock.
We can get away with the private ioctl.c:qgroup_enabled(), as all entry
points into the qgroup code check if fs_info->quota_root is NULL or not
while holding the mutex fs_info->qgroup_ioctl_lock, and returning the
error -ENOTCONN in case it's NULL.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As part of the preparation for btrfs blk_holder_ops, we want to ensure
the holder of a block device has a proper lifespan.
However btrfs is always using fput() to close a block device, which has
one problem:
- fput() is deferred
Meaning we can have a block device with invalid (aka, freed) holder.
To avoid the problem and align the behavior to other code, just call
bdev_fput() instead.
There is some extra requirement on the locking, but that's all resolved
by previous patches and we should be safe to call bdev_fput().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_uring_encoded_read()
btrfs_uring_encoded_read() returns early with -ENOTTY if the uring_cmd
is issued with IO_URING_F_COMPAT but the kernel doesn't support compat
syscalls. However, this early return bypasses the syscall accounting.
Go to out_acct instead to ensure the syscall is counted.
Fixes: 34310c442e17 ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
CC: stable@vger.kernel.org # 6.15+
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no reason to pass 'struct path' to btrfs_mksubvol(), though it's
been like the since the first commit 76dda93c6ae2c1 ("Btrfs: add
snapshot/subvolume destroy ioctl"). We only use the dentry so we should
pass it directly.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We pass name and length of subvolumes separately to the related
functions, while this can be a struct qstr which is otherwise used for
dentry interfaces.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
strcpy() is discouraged from use due to lack of bounds checking.
Replaces it with strscpy(), the recommended alternative for null
terminated strings, to follow best practices.
There are instances where strscpy() cannot be used such as where both
the source and destination are character pointers. In that instance we
can use sysfs_emit().
Link: https://github.com/KSPP/linux/issues/88
Suggested-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Brahmajit Das <bdas@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Any conversion of offsets in the logical or the physical mapping space
of the pages is done by a shift and the target type should be pgoff_t
(type of struct page::index). Fix the locations where it's still
unsigned long.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is an exported function and therefore it should have a 'btrfs_'
prefix, to make it clear it's btrfs specific, avoid future name collisions
with code outside btrfs, and make its naming consistent with most other
btrfs exported functions.
So add a 'btrfs_' prefix to it and make it return bool instead of int,
since all we need is to return true or false.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Unify naming of return value to the preferred way.
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Unify naming of return value to the preferred way.
Reviewed-by: Daniel Vacek <neelx@suse.com>yy
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The RCU protection is now done in the plain helpers, we can remove the
"_in_rcu" and "_rl_in_rcu".
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs is the only user of struct io_uring_cmd_data and its op_data
field. Switch its ->uring_cmd() implementations to store the struct
btrfs_uring_encoded_data * in the struct io_btrfs_cmd, overlayed with
io_uring_cmd's pdu field. This avoids having to touch another cache line
to access the struct btrfs_uring_encoded_data *, and allows op_data and
struct io_uring_cmd_data to be removed.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20250708202212.2851548-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we expose struct file_attr as our uapi struct rename all the
internal struct to struct file_kattr to clearly communicate that it is a
kernel internal struct. This is similar to struct mount_{k}attr and
others.
Link: https://lore.kernel.org/20250703-restlaufzeit-baurecht-9ed44552b481@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- tree-log fixes:
- fixes of log tracking of directories and subvolumes
- fix iteration and error handling of inode references
during log replay
- fix free space tree rebuild (reported by syzbot)
* tag 'for-6.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use btrfs_record_snapshot_destroy() during rmdir
btrfs: propagate last_unlink_trans earlier when doing a rmdir
btrfs: record new subvolume in parent dir earlier to avoid dir logging races
btrfs: fix inode lookup error handling during log replay
btrfs: fix iteration of extrefs during log replay
btrfs: fix missing error handling when searching for inode refs during log replay
btrfs: fix failure to rebuild free space tree using multiple transactions
|
|
Instead of recording that a new subvolume was created in a directory after
we add the entry do the directory, record it before adding the entry. This
is to avoid races where after creating the entry and before recording the
new subvolume in the directory (the call to btrfs_record_new_subvolume()),
another task logs the directory, so we end up with a log tree where we
logged a directory that has an entry pointing to a root that was not yet
committed, resulting in an invalid entry if the log is persisted and
replayed later due to a power failure or crash.
Also state this requirement in the function comment for
btrfs_record_new_subvolume(), similar to what we do for the
btrfs_record_unlink_dir() and btrfs_record_snapshot_destroy().
Fixes: 45c4102f0d82 ("btrfs: avoid transaction commit on any fsync after subvolume creation")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Fixes:
- fix invalid inode pointer dereferences during log replay
- fix a race between renames and directory logging
- fix shutting down delayed iput worker
- fix device byte accounting when dropping chunk
- in zoned mode, fix offset calculations for DUP profile when
conventional and sequential zones are used together
Regression fixes:
- fix possible double unlock of extent buffer tree (xarray
conversion)
- in zoned mode, fix extent buffer refcount when writing out extents
(xarray conversion)
Error handling fixes and updates:
- handle unexpected extent type when replaying log
- check and warn if there are remaining delayed inodes when putting a
root
- fix assertion when building free space tree
- handle csum tree error with mount option 'rescue=ibadroot'
Other:
- error message updates: add prefix to all scrub related messages,
include other information in messages"
* tag 'for-6.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix alloc_offset calculation for partly conventional block groups
btrfs: handle csum tree error with rescue=ibadroots correctly
btrfs: fix race between async reclaim worker and close_ctree()
btrfs: fix assertion when building free space tree
btrfs: don't silently ignore unexpected extent type when replaying log
btrfs: fix invalid inode pointer dereferences during log replay
btrfs: fix double unlock of buffer_tree xarray when releasing subpage eb
btrfs: update superblock's device bytes_used when dropping chunk
btrfs: fix a race between renames and directory logging
btrfs: scrub: add prefix for the error messages
btrfs: warn if leaking delayed_nodes in btrfs_put_root()
btrfs: fix delayed ref refcount leak in debug assertion
btrfs: include root in error message when unlinking inode
btrfs: don't drop a reference if btrfs_check_write_meta_pointer() fails
|
|
Add a "scrub: " prefix to all messages logged by scrub so that it's
easy to filter them from dmesg for analysis.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
