| Age | Commit message (Collapse) | Author |
|---|
|
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260116170942.733674-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
The function qcom_slim_ngd_notify_slaves() calls of_slim_get_device() which
internally uses device_find_child() to obtain a device reference.
According to the device_find_child() documentation,
the caller must drop the reference with put_device() after use.
Found via static analysis and this is similar to commit 4e65bda8273c
("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251027060601.33228-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
wait_for_completion_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240902141004.70048-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the char-misc changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In current driver qcom_slim_ngd_up_worker() indefinitely
waiting for ctrl->qmi_up completion object. This is
resulting in workqueue lockup on Kthread.
Added wait_for_completion_interruptible_timeout to
allow the thread to wait for specific timeout period and
bail out instead waiting infinitely.
Fixes: a899d324863a ("slimbus: qcom-ngd-ctrl: add Sub System Restart support")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430091238.35209-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert the slimbus drivers from always returning zero in the
remove callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430091657.35428-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently we have auto suspend delay of 1s which is
very high and it takes long time to driver for runtime
suspend after use case is done.
Hence to optimize runtime PM ops, reduce auto suspend
delay to 100ms.
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240430091657.35428-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct
qmi_elem_info") allows QMI message encoding/decoding rules
to be const, so do that for qcom-ngd-ctrl.c.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114403.86230-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reinitialize the reconf completion flag when ngd registers are
not retainied or when enumeration is lost for ngd.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify the code with devm_platform_get_and_ioremap_resource().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for 44.1Khz frequency by dynamically calculating the slimbus
parameters instead of statically defining them.
Co-developed-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Signed-off-by: Prudhvi Yarlagadda <pyarlaga@codeaurora.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If transfer in qcom_slim_ngd_xfer_msg_sync() fails, we need to drop the
PM runtime usage counter to have it balanced.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Slimbus core interrupt is getting fired after suspend. At this point
ADSP slimbus hardware is off with gated clocks which is leading to an
unclocked access when HLOS slimbus tried to read the interrupt
status register in the ISR.
Co-developed-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20221118065246.6835-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No error handling is performed when platform_device_add()
return fails. Refer to the error handling of driver_set_override(),
add error handling for platform_device_add().
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Link: https://lore.kernel.org/r/20220914031953.94061-1-linyujun809@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use dev_err_probe to skip printing of deferred probe errors and to
simplify error paths.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add proper error path in probe() to cleanup resources previously
acquired/allocated to fix warnings visible during probe deferral:
notifier callback qcom_slim_ngd_ssr_notify already registered
WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90
Modules linked in:
CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380
Call trace:
notifier_chain_register+0x5c/0x90
srcu_notifier_chain_register+0x44/0x90
qcom_register_ssr_notifier+0x38/0x4c
qcom_slim_ngd_ctrl_probe+0xd8/0x400
platform_probe+0x6c/0xe0
really_probe+0xbc/0x2d4
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x12c
__device_attach_driver+0xb8/0x120
bus_for_each_drv+0x78/0xd0
__device_attach+0xa8/0x1c0
device_initial_probe+0x18/0x24
bus_probe_device+0xa0/0xac
deferred_probe_work_func+0x88/0xc0
process_one_work+0x1d4/0x320
worker_thread+0x2cc/0x44c
kthread+0x110/0x114
ret_from_fork+0x10/0x20
Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use correct error code, instead of previous 'ret' value, when printing
error from pdr_add_lookup() failure.
Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122910.170730-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Tested-By: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220429165051.6187-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver_override field from platform driver should not be initialized
from static memory (string literal) because the core later kfree() it,
for example when driver_override is set via sysfs.
Use dedicated helper to set driver_override properly.
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220419113435.246203-11-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During suspend/resume NGD remote instance is power cycled along
with remotely controlled bam dma engine.
So Reset the dma configuration during this suspend resume path
so that we are not dealing with any stale dma setup.
Without this transactions timeout after first suspend resume path.
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210809082428.11236-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For some reason we ended up using wrong device in some places for pm_runtime calls.
Fix this so that NGG driver can do runtime pm correctly.
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210809082428.11236-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Failure of dma_alloc_coherent will already throw a error message,
so addition message is really redundant here. Remove it!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102451.17114-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Attempting to send a power request during PM operations, when the QMI
handle isn't initialized results in a NULL pointer dereference. So check
if the QMI handle has been initialized before attempting to post the
power requests.
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102451.17114-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
qcom_slim_qmi_msg_handlers[] and qcom_slim_ngd_qmi_svc_event_ops are
only used as input arguments to qmi_handle_init() which accepts const
pointers to both qmi_ops and qmi_msg_handler. Make them const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102451.17114-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support to protection domain restart. Protection domain restart
would also restart the service just like SSR.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102451.17114-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds SSR(SubSystem Restart) support which includes, synchronisation
between SSR and QMI server notifications. Also with this patch now NGD is taken
down by SSR instead of QMI server down notification.
NGD up path now relies on both SSR and QMI notifications and particularly
sequence of SSR up followed by QMI server up notification.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102451.17114-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In QMI new server notification we enable the NGD however during
delete server notification we do not disable the NGD.
This can lead to multiple instances of NGD being enabled, so make
sure that we disable NGD in delete server callback to fix this issue!
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200925095520.27316-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove redundant assignment, as this is already done fewlines lines before.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200417093914.22052-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Get drvdata directly from parent instead of ngd dev, as ngd
dev can probe defer and previously set drvdata will become null.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200417093618.7929-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds compatible for SlimBus Controller on SDM845.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200312152510.12224-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma_request_slave_channel()
dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.
By using dma_request_chan() directly the driver can support deferred
probing against DMA.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200109103148.5612-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return in two places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190818093902.29993-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case platform_device_alloc fails, the fix returns an error
code to avoid the NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistake in a dev_err message, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
on non DT platforms like x86 of_match_node is set to NULL, dereferencing
directly would throw an error.
Fix this by doing this in two steps, get the match then the data.
Reported-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
SLIM_MSG_CLK_PAUSE_SEQ_FLG is never set in any of the slim core,
so performing a check in ngd driver is totally unnecessary.
Also this patch fixes warning about mc field overflow reported
with CoverityScan.
Making clk pause feature optional will be added to slim core in
next development cycle.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Validate logical address assigned by remote, in failure cases this value
is all zeors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Register slimbus controller only after finishing powerup sequnce so that we
do not endup in situation where core starts sending transactions before
the controller is ready.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It looks like there is a typo in probe return. Fix it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move ngd platform driver out of loop so that it registers only once.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
qcom_slim_ngd_runtime_suspend is protected by an #ifdef,
qcom_slim_ngd_runtime_idle is now, which causes a build time warning:
drivers/slimbus/qcom-ngd-ctrl.c:1470:12: error: 'qcom_slim_ngd_runtime_idle' defined but not used [-Werror=unused-function]
Marking both as __maybe_unused lets us get rid of the warning
as well as the #ifdef.
Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support to stream support, this involve implementing
user specific implementation of Data channel management and channel
management SLIMbus messages.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds suppor to Qualcomm SLIMBus Non-Generic Device (NGD)
controller driver.
This is light-weight SLIMBus controller driver responsible for
communicating with slave HW directly over the bus using messaging
interface, and communicating with master component residing on ADSP
for bandwidth and data-channel management
Based on intial work from
Karthikeyan Ramasubramanian <kramasub@codeaurora.org> and
Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
