| Age | Commit message (Collapse) | Author |
|---|
|
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Previous setup was:
- pll-west clock registered from driver at of_clk_init();
- Both OCC and UART clocks registered from DT using fixed-factor-clock
compatible.
Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register west-per-occ and west-per-uart (giving them
proper names at the same time).
Also switch from hard-coded index 0 for pll-west to using the
EQ6HC_WEST_PLL_PER constant by exposed dt-bindings headers.
All get exposed at of_clk_init() because they get used by the AMBA PL011
serial ports. Those are instantiated before platform bus infrastructure.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-8-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Previous setup was:
- pll-cpu clock registered from driver at of_clk_init();
- occ-cpu clock registered from DT using fixed-factor-clock compatible.
Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register occ-cpu.
Also switch from hard-coded index 0 for pll-cpu to using the
EQ6HC_CENTRAL_PLL_CPU constant by exposed dt-bindings headers.
occ-cpu is exposed at of_clk_init() because it gets used by both the DT
CPU nodes and the GIC timer.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-7-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Expose additional clocks on EyeQ5. Some indexes come from dt-bindings
headers, others are private to the driver.
Few clocks are early (of_clk_init() stage: core clocks and UART clock),
others can wait until platform device probe. The source for this list
is downstream Mobileye kernel and some internal documentation.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-6-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Driver can currently host two types of clocks:
- PLLs derived directly from the main crystal (taken using a fwhandle).
- Divider clocks derived from those PLLs.
PLLs can be instantiated from of_clk_init() or platform device probe,
using two separate clock providers. Divider clocks are all instantiated
at platform device probe.
Add a third type of clocks: fixed factors. Those can be instantiated at
both stages. They can be parented to any clock from the driver. Early
match data and match data store the list of fixed factor clocks.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-5-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
We used to let compatibles with a single clock exposed to not have
a cell. Switch away from that and enforce a cell in all cases.
This is done at the same time as some compatibles
(mobileye,eyeq6h-{central,west}-olb) go from one to more clocks
exposed. Let's do the same switch and avoid future devicetree
work if/when others follow.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-4-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add Mobileye EyeQ5, EyeQ6L and EyeQ6H clock controller driver. It is
both a platform driver and a hook onto of_clk_init() used for clocks
required early (GIC timer, UARTs).
For some compatible, it is both at the same time. eqc_early_init()
initialises early PLLs and exposes its own clock provider. It marks
other clocks as deferred. eqc_probe() adds all remaining clocks using
another clock provider.
It exposes read-only PLLs derived from the main crystal on board.
It also exposes another type of clocks: divider clocks.
They always have even divisors and have one PLL as parent.
This driver also bears the responsability for optional reset and pinctrl
auxiliary devices. The match data attached to the devicetree node
compatible indicate if such devices should be created. They all get
passed a pointer to the start of the OLB region.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241023-mbly-clk-v6-1-ca83e43daf93@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
