| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ATA updates from Damien Le Moal:
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas)
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry)
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas)
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan)
- Improve device node scan in the ahci-dwc driver (Krzysztof)
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof)
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me)
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas)
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan)
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W)
* tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_ftide010: Fix some DMA timings
ata: pata_cypress: fix typo in error message
ata: pata_legacy: remove VLB support
ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors
dt-bindings: ata: sata: Document the graph port
ata: libata-scsi: avoid Non-NCQ command starvation
ata: libata-scsi: refactor ata_scsi_translate()
ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-dwc: Simplify with scoped for each OF child loop
dt-bindings: ata: ahci-platform: Drop unnecessary select schema
ata: libata: Allow more quirks
ata: libata: Add libata.force parameter max_sec
ata: libata: Add support to parse equal sign in libata.force
ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk
ata: libata: Add ata_force_get_fe_for_dev() helper
ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks
ata: libata: avoid long timeouts on hot-unplugged SATA DAS
ata: libata-scsi: Remove superfluous local_irq_save()
|
|
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a non-NCQ command is issued while NCQ commands are being executed,
ata_scsi_qc_issue() indicates to the SCSI layer that the command issuing
should be deferred by returning SCSI_MLQUEUE_XXX_BUSY. This command
deferring is correct and as mandated by the ACS specifications since
NCQ and non-NCQ commands cannot be mixed.
However, in the case of a host adapter using multiple submission queues,
when the target device is under a constant load of NCQ commands, there
are no guarantees that requeueing the non-NCQ command will be executed
later and it may be deferred again repeatedly as other submission queues
can constantly issue NCQ commands from different CPUs ahead of the
non-NCQ command. This can lead to very long delays for the execution of
non-NCQ commands, and even complete starvation for these commands in the
worst case scenario.
Since the block layer and the SCSI layer do not distinguish between
queueable (NCQ) and non queueable (non-NCQ) commands, libata-scsi SAT
implementation must ensure forward progress for non-NCQ commands in the
presence of NCQ command traffic. This is similar to what SAS HBAs with a
hardware/firmware based SAT implementation do.
Implement such forward progress guarantee by limiting requeueing of
non-NCQ commands from ata_scsi_qc_issue(): when a non-NCQ command is
received and NCQ commands are in-flight, do not force a requeue of the
non-NCQ command by returning SCSI_MLQUEUE_XXX_BUSY and instead return 0
to indicate that the command was accepted but hold on to the qc using
the new deferred_qc field of struct ata_port.
This deferred qc will be issued using the work item deferred_qc_work
running the function ata_scsi_deferred_qc_work() once all in-flight
commands complete, which is checked with the port qc_defer() callback
return value indicating that no further delay is necessary. This check
is done using the helper function ata_scsi_schedule_deferred_qc() which
is called from ata_scsi_qc_complete(). This thus excludes this mechanism
from all internal non-NCQ commands issued by ATA EH.
When a port deferred_qc is non NULL, that is, the port has a command
waiting for the device queue to drain, the issuing of all incoming
commands (both NCQ and non-NCQ) is deferred using the regular busy
mechanism. This simplifies the code and also avoids potential denial of
service problems if a user issues too many non-NCQ commands.
Finally, whenever ata EH is scheduled, regardless of the reason, a
deferred qc is always requeued so that it can be retried once EH
completes. This is done by calling the function
ata_scsi_requeue_deferred_qc() from ata_eh_set_pending(). This avoids
the need for any special processing for the deferred qc in case of NCQ
error, link or device reset, or device timeout.
Reported-by: Xingui Yang <yangxingui@huawei.com>
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: bdb01301f3ea ("scsi: Add host and host template flag 'host_tagset'")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Xingui Yang <yangxingui@huawei.com>
|
|
Factor out of ata_scsi_translate() the code handling queued command
deferral using the port qc_defer callback and issuing the queued
command with ata_qc_issue() into the new function ata_scsi_qc_issue(),
and simplify the goto used in ata_scsi_translate().
While at it, also add a lockdep annotation to check that the port lock
is held when ata_scsi_translate() is called.
No functional changes.
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
When a SATA DAS enclosure is connected behind a Thunderbolt PCIe
switch, hot-unplugging the whole enclosure causes pciehp to tear down
the PCI hierarchy before the SCSI layer issues SYNCHRONIZE CACHE and
START STOP UNIT for the disks.
libata still queues these commands and the AHCI driver tries to access
the HBA registers even though the PCI channel is already offline. This
results in a series of timeouts and error recovery attempts, e.g.:
[ 824.778346] pcieport 0000:00:07.0: pciehp: Slot(14): Link Down
[ 891.612720] ata8.00: qc timeout after 5000 msecs (cmd 0xec)
[ 902.876501] ata8.00: qc timeout after 10000 msecs (cmd 0xec)
[ 934.107998] ata8.00: qc timeout after 30000 msecs (cmd 0xec)
[ 936.206431] sd 7:0:0:0: [sda] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
...
[ 1006.298356] ata1.00: qc timeout after 5000 msecs (cmd 0xec)
[ 1017.561926] ata1.00: qc timeout after 10000 msecs (cmd 0xec)
[ 1048.791790] ata1.00: qc timeout after 30000 msecs (cmd 0xec)
[ 1050.890035] sd 0:0:0:0: [sdb] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
With this patch applied, the same hot-unplug looks like:
[ 59.965496] pcieport 0000:00:07.0: pciehp: Slot(14): Link Down
[ 60.002502] sd 7:0:0:0: [sda] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
...
[ 60.103050] sd 0:0:0:0: [sdb] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
In this test setup with two disks, the hot-unplug sequence shrinks from
about 226 seconds (~3.8 minutes) between the Link Down event and the
last SYNCHRONIZE CACHE failure to under a second. Without this patch the
total delay grows roughly with the number of disks, because each disk
gets its own SYNCHRONIZE CACHE and qc timeout series.
If the underlying PCI device is already gone, these commands cannot
succeed anyway. Avoid issuing them by introducing
ata_adapter_is_online(), which checks pci_channel_offline() for
PCI-based hosts. It is used from ata_scsi_find_dev() to return NULL,
causing the SCSI layer to fail new commands with DID_BAD_TARGET
immediately, and from ata_qc_issue() to bail out before touching the
HBA registers.
Since such failures would otherwise trigger libata error handling,
ata_adapter_is_online() is also consulted from ata_scsi_port_error_handler().
When the adapter is offline, libata skips ap->ops->error_handler(ap) and
completes error handling using the existing path, rather than running
a full EH sequence against a dead adapter.
With this change, SYNCHRONIZE CACHE and START STOP UNIT commands
issued during hot-unplug fail quickly once the PCI channel is offline,
without qc timeout spam or long libata EH delays.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Henry Tseng <henrytseng@qnap.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Commit 28a3fc2295a7 ("libata: implement ZBC IN translation") added
ata_scsi_report_zones_complete(). Since the beginning, this function
has disabled IRQs on the local CPU using local_irq_save().
qc->complete_fn is always called with ap->lock held, and the ap->lock
is always taken using spin_lock_irq*().
Thus, this local_irq_save() is superfluous and can be removed.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
|
|
Commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org
Reported-by: Ilia Baryshnikov <qwelias@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704
Fixes: cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Call scsi_device_put() in ata_scsi_dev_rescan() if the device or its
queue are not running.
Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume")
Cc: stable@vger.kernel.org
Signed-off-by: Yihang Li <liyihang9@h-partners.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Some embedded devices have the ability to control whether power is
provided to the disks via the SATA power connector or not. ACPI power
resources are usually off by default, thus making it unclear if the
specific power resource will retain its state after a restart. If power
resources are defined on ATA ports / devices in ACPI, we should stop the
disk on SYSTEM_RESTART, to ensure the disk will not lose power while
active.
Add a new function, ata_acpi_dev_manage_restart(), that will be used to
determine if a disk should be stopped before restarting the system. If a
usable ACPI power resource has been found, it is assumed that the disk
will lose power after a restart and should be stopped to avoid unclean
shutdown due to power loss.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Link: https://patch.msgid.link/20251104142413.322347-4-markus.probst@posteo.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs into for-6.18/block
Pull struct block_device getgeo changes from Al.
"switching ->getgeo() from struct block_device to struct gendisk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>"
* tag 'pull-getgeo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block: switch ->getgeo() to struct gendisk
scsi: switch ->bios_param() to passing gendisk
scsi: switch scsi_bios_ptable() and scsi_partsize() to gendisk
|
|
Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent
SET FEATURES command from being issued to a drive when NCQ commands
are active.
ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED
flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES
gets deferred due to outstanding NCQ commands, the original MODE SELECT
command will be re-queued. When the re-queued MODE SELECT goes through
the ata_mselect_control_ata_feature() translation again, SET FEATURES
will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or
cleared by the initial translation of MODE SELECT.
The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature()
are safe to remove because scsi_cdl_enable() implements a similar logic
that avoids enabling CDL if it has been enabled already.
Fixes: 17e897a45675 ("ata: libata-scsi: Improve CDL control")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Instances are passed struct block_device *bdev argument; the only thing
it is used for (if it's used in the first place) is bdev->bd_disk.
Might as well pass that in the first place...
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ata_gen_ata_sense() is always called for a failed qc missing sense data
so that a sense key, code and code qualifier can be generated using
ata_to_sense_error() from the qc status and error fields of its result
task file. However, if the qc does not have its result task file filled,
ata_gen_ata_sense() returns early without setting a sense key.
Improve this by defaulting to returning ABORTED COMMAND without any
additional sense code, since we do not know the reason for the failure.
The same fix is also applied in ata_gen_passthru_sense() with the
additional check that the qc failed (qc->err_mask is set).
Fixes: 816be86c7993 ("ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()")
inadvertantly added the entry 0x40 (ATA_DRDY) to the stat_table array in
the function ata_to_sense_error(). This entry ties a failed qc which has
a status filed equal to ATA_DRDY to the sense key ILLEGAL REQUEST with
the additional sense code UNALIGNED WRITE COMMAND. This entry will be
used to generate a failed qc sense key and sense code when the qc is
missing sense data and there is no match for the qc error field in the
sense_table array of ata_to_sense_error().
As a result, for a failed qc for which we failed to get sense data (e.g.
read log 10h failed if qc is an NCQ command, or REQUEST SENSE EXT
command failed for the non-ncq case, the user very often end up seeing
the completely misleading "unaligned write command" error, even if qc
was not a write command. E.g.:
sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Fix this by removing the ATA_DRDY entry from the stat_table array so
that we default to always returning ABORTED COMMAND without any
additional sense code, since we do not know any better. The entry 0x08
(ATA_DRQ) is also removed since signaling ABORTED COMMAND with a parity
error is also misleading (as a parity error would likely be signaled
through a bus error). So for this case, also default to returning
ABORTED COMMAND without any additional sense code. With this, the
previous example error case becomes:
sd 0:0:0:0: [sda] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#17 Sense Key : Aborted Command [current]
sd 0:0:0:0: [sda] tag#17 Add. Sense: No additional sense information
sd 0:0:0:0: [sda] tag#17 CDB: Read(10) 28 00 00 00 10 00 00 00 08 00
I/O error, dev sda, sector 4096 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Together with these fixes, refactor stat_table to make it more readable
by putting the entries comments in front of the entries and using the
defined status bits macros instead of hardcoded values.
Reported-by: Lorenz Brun <lorenz@brun.one>
Reported-by: Brandon Schwartz <Brandon.Schwartz@wdc.com>
Fixes: 8ae720449fca ("libata: whitespace fixes in ata_to_sense_error()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce the inline helper function ata_port_eh_scheduled() to test if
EH is pending (ATA_PFLAG_EH_PENDING port flag is set) or running
(ATA_PFLAG_EH_IN_PROGRESS port flag is set) for a port. Use this helper
in ata_port_wait_eh() and __ata_scsi_queuecmd() to replace the hardcoded
port flag tests.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250704104601.310643-1-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Change the function ata_scsi_offline_dev() to return a bool and change
this function kdoc comment to have the correct mention of its call site.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The ATA device flag ATA_DFLAG_ZAC is used to indicate if a devie is a
host managed or host aware zoned device. However, this flag is not used
in the hot path and only used during device scanning/revalidation and
for inquiry and sense SCSI command translation.
Save one bit from struct ata_device flags field by replacing this flag
with the internal helper function ata_dev_is_zac(). This function
returns true if the device class is ATA_DEV_ZAC (host managed ZAC device
case) or if its identify data reports it supports the zoned command set
(host aware ZAC device case).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Simplify ata_print_version_once() using dev_dbg_once() (Heiner)
- Some cleanups of libata-sata code to simplify the sense data fetching
code and use BIT() macro for tag bit handling (Niklas)
- Fix variable name spelling in the sata_sx4 driver (Colin)
- Improve sense data information field handling for passthrough
commands (Igor)
- Add Rockchip RK3576 SoC compatible to the Designware AHCI DT bindings
(Nicolas)
- Add a message to indicate if a port is marked as external or not, to
help with debugging potential issues with LPM (Niklas)
- Convert DT bindings for "ti,dm816-ahci", "apm,xgene-ahci",
"cavium,ebt3000-compact-flash", "marvell,orion-sata", and
"arasan,cf-spear1340" to DT schema (Rob)
- Cleanup and improve the code and related comments for HIPM and DIPM
(host initiated and device initiated power managent) handling.
In particular, keep DIPM disabled while modifying the allowed LPM
states to avoid races with the device initiating power state changes
(Niklas)
* tag 'ata-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-eh: Keep DIPM disabled while modifying the allowed LPM states
ata: libata-eh: Rename no_dipm variable to be more clear
ata: libata-eh: Rename hipm and dipm variables
ata: libata-eh: Add ata_eh_set_lpm() WARN_ON_ONCE
ata: libata-eh: Update DIPM comments to reflect reality
dt-bindings: ata: Convert arasan,cf-spear1340 to DT schema
dt-bindings: ata: Convert marvell,orion-sata to DT schema
dt-bindings: ata: Convert cavium,ebt3000-compact-flash to DT schema
dt-bindings: ata: Convert apm,xgene-ahci to DT schema
dt-bindings: ata: Convert st,ahci to DT schema
dt-bindings: ata: Convert ti,dm816-ahci to DT schema
ata: libata: Print if port is external on boot
dt-bindings: ata: rockchip-dwc-ahci: add RK3576 compatible
ata: libata-scsi: Do not set the INFORMATION field twice for ATA PT
ata: sata_sx4: Fix spelling mistake "parttern" -> "pattern"
ata: libata-sata: Use BIT() macro to convert tag to bit field
ata: libata-sata: Simplify sense_valid fetching
ata: libata-core: Simplify ata_print_version_once
|
|
For ATA PASS-THROUGH + fixed format sense data + NCQ autosense
the INFORMATION sense data field is being written twice:
- 1st write: (redundant)
scsi_set_sense_information() sets the INFORMATION field to ATA LBA.
This is incorrect for ATA PASS-THROUGH.
- 2nd write: (correct)
ata_scsi_set_passthru_sense_fields() sets the INFORMATION field
to ATA ERROR/STATUS/DEVICE/COUNT(7:0) as per SAT spec.
There is no user-visible issue because second write overwrites
the incorrect data from the first write.
This patch eliminates the reduntant write by moving the INFORMATION
sense data field population logic to ata_scsi_qc_complete().
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
With ATA devices supporting the CDL feature, using CDL requires that the
feature be enabled with a SET FEATURES command. This command is issued
as the translated command for the MODE SELECT command issued by
scsi_cdl_enable() when the user enables CDL through the device
cdl_enable sysfs attribute.
Currently, ata_mselect_control_ata_feature() always translates a MODE
SELECT command for the ATA features subpage of the control mode page to
a SET FEATURES command to enable or disable CDL based on the cdl_ctrl
field. However, there is no need to issue the SET FEATURES command if:
1) The MODE SELECT command requests disabling CDL and CDL is already
disabled.
2) The MODE SELECT command requests enabling CDL and CDL is already
enabled.
Fix ata_mselect_control_ata_feature() to issue the SET FEATURES command
only when necessary. Since enabling CDL also implies a reset of the CDL
statistics log page, avoiding useless CDL enable operations also avoids
clearing the CDL statistics log.
Also add debug messages to clearly signal when CDL is being enabled or
disabled using a SET FEATURES command.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
For the ATA features subpage of the control mode page, the T10 SAT-6
specifications state that:
For a MODE SENSE command, the SATL shall return the CDL_CTRL field value
that was last set by an application client.
However, the function ata_msense_control_ata_feature() always sets the
CDL_CTRL field to the 0x02 value to indicate support for the CDL T2A and
T2B pages. This is thus incorrect and the value 0x02 must be reported
only after the user enables the CDL feature, which is indicated with the
ATA_DFLAG_CDL_ENABLED device flag. When this flag is not set, the
CDL_CTRL field of the ATA feature subpage of the control mode page must
report a value of 0x00.
Fix ata_msense_control_ata_feature() to report the correct values for
the CDL_CTRL field, according to the enable/disable state of the device
CDL feature.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
The function ata_mselect_control_ata_feature() has a return type defined
as unsigned int but this function may return negative error codes, which
are correctly propagated up the call chain as integers.
Fix ata_mselect_control_ata_feature() to have the correct int return
type.
While at it, also fix a typo in this function description comment.
Fixes: df60f9c64576 ("scsi: ata: libata: Add ATA feature control sub-page translation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
Improve naming consistency with the .sdev_prep() and .sdev_destroy()
methods by renaming .device_configure() into .sdev_configure().
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename .slave_alloc() into .sdev_init() and .slave_destroy() into
.sdev_destroy(). The new names make it clear that these are actions on
SCSI devices. Make this change in the SCSI core, SCSI drivers and also
in the ATA drivers. No functionality has been changed.
This patch has been created as follows:
* Change the text "slave_alloc" into "sdev_init" in all source files
except those in drivers/net/ and Documentation/.
* Change the text "slave_destroy" into "sdev_destroy" in all source
files except those in drivers/net/ and Documentation/.
* Rename lpfc_no_slave() into lpfc_no_sdev().
* Manually adjust whitespace where necessary to restore vertical
alignment (dc395x driver and include/linux/libata.h).
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Fix typos in comments (Yan Zhen)
- Remove unused macro definitions (Damien Le Moal)
- Switch back to the .remove() callback (Uwe Kleine-König)
- Make use of the get_unaligned_be24() helper instead of open coding
(Andy Shevchenko)
- Refactor and cleanup ata_scsi_simulate() command emulation, such that
all commands use ata_scsi_rbuf_fill() with its own callback (Damien
Le Moal)
- Improve ata_scsi_simulate() command emulation by accurately setting
the SCSI command residual (number of bytes not filled) in the command
reply (Damien Le Moal)
- Add missing iommus property in ahci-platform device tree binding
(Frank Wunderlich)
* tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: ahci-platform: add missing iommus property
ata: libata-scsi: Return residual for emulated SCSI commands
ata: libata-scsi: Remove struct ata_scsi_args
ata: libata-scsi: Document all VPD page inquiry actors
ata: libata-scsi: Refactor ata_scsiop_maint_in()
ata: libata-scsi: Refactor ata_scsiop_read_cap()
ata: libata-scsi: Refactor ata_scsi_simulate()
ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24()
ata: Switch back to struct platform_driver::remove()
ata: libata: Remove unused macro definitions
ata: Fix typos in the comment
|
|
The function ata_scsi_rbuf_fill() used to fill the reply buffer of
emulated SCSI commands always copies the ATA reply buffer
(ata_scsi_rbuf) up to the size of the SCSI command buffer (the transfer
length for the command), even if the reply is shorter than the SCSI
command buffer. This leads to issuers of the SCSI command to always get
a result without any residual (resid is always 0) despite the
potentially shorter reply for the command.
Modify all fill actors used by ata_scsi_rbuf_fill() to return the number
of bytes filled for the reply and 0 in case of error. Using this value,
add a call to scsi_set_resid() in ata_scsi_rbuf_fill() to set the
correct residual for the SCSI command when the reply length is shorter
than the command buffer.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241022024537.251905-7-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The data structure struct ata_scsi_args is used to pass the target ATA
device, the SCSI command to simulate and the device identification data
to ata_scsi_rbuf_fill() and to its actor function. This method of
passing information does not improve the code in any way and in fact
increases the number of pointer dereferences for no gains.
Drop this data structure by modifying the interface of
ata_scsi_rbuf_fill() and its actor function to take an ATA device and a
SCSI command as argument.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241022024537.251905-6-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Add the missing kdoc comments for the ata_scsiop_inq_XX functions used
to emulate access to VPD pages.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241022024537.251905-5-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Move the check for MI_REPORT_SUPPORTED_OPERATION_CODES from
ata_scsi_simulate() into ata_scsiop_maint_in() to simplify
ata_scsi_simulate() code.
Furthermore, since an rbuff fill actor function returning a non-zero
value causes no data to be returned for the command, directly return
an error (return 1) for invalid command formt after setting the invalid
field in cdb error.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241022024537.251905-4-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Move the check for the scsi command service action being
SAI_READ_CAPACITY_16 from ata_scsi_simulate() into ata_scsiop_read_cap()
to simplify ata_scsi_simulate() for processing capacity reading commands
(READ_CAPACITY and SERVICE_ACTION_IN_16).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241022024537.251905-3-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Factor out the code handling the INQUIRY command in ata_scsi_simulate()
using the function ata_scsi_rbuf_fill() with the new actor
ata_scsiop_inquiry(). This new actor function calls the existing actors
to handle the standard inquiry as well as extended inquiry (VPD page
access).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241022024537.251905-2-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Refactor scsi_6_lba_len() with use of get_unaligned_be24() to make it
consistent with other similar helper implementations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241016131845.898632-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix a NULL pointer dereference introduced by the recent cleanups of
the command duration limits feature handling (me)
- Fix incorrect generation of the mode sense data for the
ALL_SUB_MPAGES page (me)
* tag 'ata-6.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix ata_msense_control() CDL page reporting
ata: libata-scsi: Fix ata_msense_control_spgt2()
|
|
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff1d ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
ata_msense_control_spgt2() can be called even for devices that do not
support CDL when the user requests the ALL_SUB_MPAGES mode sense page,
but for such device, this will cause a NULL pointer dereference as
dev->cdl is NULL. Similarly, we should not return any data if
ata_msense_control_spgt2() is called when the user requested the
CDL_T2A_SUB_MPAGE or CDL_T2B_SUB_MPAGE pages for a device that does not
support CDL.
Avoid this potential NULL pointer dereference by checking if the device
support CDL on entry to ata_msense_control_spgt2() and return 0 if it
does not support CDL.
Reported-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Tested-by: syzbot+37757dc11ee77ef850bb@syzkaller.appspotmail.com
Fixes: 602bcf212637 ("ata: libata: Improve CDL resource management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Convert the qcom AHCI controller DT bindings to DT schema (from
Rayyan)
- Cleanup of libata core and drivers code handling controller and
device quirks to rename "blacklist" to the more neutral "quirk" and
to replace the rarely used "horkage" term with the more common
"quirk" naming (me)
- Add libata-core message to print the quirks applied to a controller
or device (me)
- Remove the not-so-useful function ata_noop_qc_prep() from libata core
(me)
- ahci_imx driver cleanup, improvements and DT bindings compatible
strings update (Richard and Dan)
- libahci_platform improvements (Zhang)
- Remove obsolete functions declarations from libata header files (from
Gaosheng)
- Improve teh ahci_brcm driver using managed device resources funetions
(Zhang)
- Introduce new helper function to improve libata EH code readability
(Niklas)
- Enable module autoloading for the pata_ftide010, pata_ixp4xx and
sata_gemini drivers (Liao)
- Move SATA related functions and data declaraions from libata-core to
libata-sata (me)
- Rename the function handling the sense data for successful NCQ
commands log to better reflect that function actions (me)
- Reduce libata memory usage by moving port resources to struct
ata_device and by optimizing the management of resources for CDL
capable devices (me)
- Improve libata-eh handling of failed ATA passthrough commands
(Niklas)
* tag 'ata-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (39 commits)
ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
ata: libata: Fix W=1 compilation warning
ata: libata: Improve CDL resource management
ata: libata: Introduce ata_dev_free_resources
ata: libata: Move sector_buf from struct ata_port to struct ata_device
ata: libata: Rename ata_eh_read_sense_success_ncq_log()
ata: libata: Move sata_std_hardreset() definition to libata-sata.c
ata: libata: Move sata_down_spd_limit() to libata-sata.c
ata: libata: Improve __ata_qc_complete()
ata: libata-scsi: Improve ata_scsi_handle_link_detach()
ata: libata: Cleanup libata-transport
ata: sata_gemini: Enable module autoloading
ata: pata_ixp4xx: Enable module autoloading
ata: pata_ftide010: Enable module autoloading
ata: libata: Add helper ata_eh_decide_disposition()
ata: ahci_brcm: Use devm_platform_ioremap_resource_byname() helper function
ata: libata: Remove obsolete function declarations
ata: ahci_imx: Fix error code in probe()
ata: libahci_platform: Simplify code with for_each_child_of_node_scoped()
ata: ahci_imx: Correct the email address
...
|
|
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.
scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.
Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.
libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.
Thus, libata doesn't really care about DID_TIME_OUT at all, and currently
clears the host byte at the end of EH, in ata_scsi_qc_complete(), before
scsi_eh_finish_cmd() is called.
However, this clearing in ata_scsi_qc_complete() is currently only done
for commands that are not ATA passthrough commands.
Since the host byte is visible in the completion that we return to user
space for ATA passthrough commands, for ATA passthrough commands that got
completed via EH (commands with sense data), the user will incorrectly see:
ATA pass-through(16): transport error: Host_status=0x03 [DID_TIME_OUT]
Fix this by moving the clearing of the host byte (which is currently only
done for commands that are not ATA passthrough commands) from
ata_scsi_qc_complete() to the start of EH (regardless if the command is
ATA passthrough or not).
While at it, use the proper helper function to clear the host byte, rather
than open coding the clearing.
This will make sure that we:
-Correctly clear DID_TIME_OUT for both ATA passthrough commands and
commands that are not ATA passthrough commands.
-Do not needlessly clear the host byte for commands that did not go via EH.
ata_scsi_qc_complete() is called both for commands that are completed
normally (without going via EH), and for commands that went via EH,
however, only commands that went via EH will have DID_TIME_OUT set.
Fixes: 24aeebbf8ea9 ("scsi: ata: libata: Change ata_eh_request_sense() to not set CHECK_CONDITION")
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Closes: https://lore.kernel.org/linux-ide/ZttIN8He8TOZ7Lct@google.com/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
The ncq_sense_buf buffer field of struct ata_port is allocated and used
only for devices that support the Command Duration Limits (CDL) feature.
However, the cdl buffer of struct ata_device, which is used to cache the
command duration limits log page for devices supporting CDL is always
allocated as part of struct ata_device, which is wasteful of memory for
devices that do not support this feature.
Clean this up by defining both buffers as part of the new ata_cdl
structure and allocating this structure only for devices that support
the CDL feature. This new structure is attached to struct ata_device
using the cdl pointer.
The functions ata_dev_init_cdl_resources() and
ata_dev_cleanup_cdl_resources() are defined to manage this new structure
allocation, initialization and freeing when a port is removed or a
device disabled. ata_dev_init_cdl_resources() is called from
ata_dev_config_cdl() only for devices that support CDL.
ata_dev_cleanup_cdl_resources() is called from ata_dev_free_resources()
to free the ata_cdl structure when a device is being disabled by EH.
Note that the name of the former cdl log buffer of struct ata_device is
changed to desc_log_buf to make it clearer that it is a buffer for the
limit descriptors log page.
This change reduces the size of struct ata_device, thus reducing memory
usage for ATA devices that do not support the CDL feature.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Introduce the function ata_dev_free_resources() to free the resources
allocated to support a device features. For now, this function is
reduced to calling zpodd_exit() for devices that have this feature
enabled.
ata_dev_free_resources() is called from ata_eh_dev_disable() as this
function is always called for all devices attached to a port that is
being detached and for devices that are being disabled due to being
removed (detached) from the system or due to errors.
With this change, the call to zpodd_exit() done in ata_port_detach()
and ata_scsi_handle_link_detach() are removed as these functions
remove all devices attached to the link or port using libata EH, thus
resulting in ata_eh_dev_disable() being called and the zpodd_exit()
function being executed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
A struct ata_device flags should always be set and cleared with the
device port locked. Testing for a flag should thus also be done while
holding the device port lock. In accordance to this principle, modify
ata_scsi_handle_link_detach() to test and clear the ATA_DFLAG_DETACHED
flag while holding the device port lock.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
This reverts commit 28ab9769117ca944cb6eb537af5599aa436287a4.
Sense data can be in either fixed format or descriptor format.
SAT-6 revision 1, "10.4.6 Control mode page", defines the D_SENSE bit:
"The SATL shall support this bit as defined in SPC-5 with the following
exception: if the D_ SENSE bit is set to zero (i.e., fixed format sense
data), then the SATL should return fixed format sense data for ATA
PASS-THROUGH commands."
The libata SATL has always kept D_SENSE set to zero by default. (It is
however possible to change the value using a MODE SELECT SG_IO command.)
Failed ATA PASS-THROUGH commands correctly respected the D_SENSE bit,
however, successful ATA PASS-THROUGH commands incorrectly returned the
sense data in descriptor format (regardless of the D_SENSE bit).
Commit 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE bit for
CK_COND=1 and no error") fixed this bug for successful ATA PASS-THROUGH
commands.
However, after commit 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE
bit for CK_COND=1 and no error"), there were bug reports that hdparm,
hddtemp, and udisks were no longer working as expected.
These applications incorrectly assume the returned sense data is in
descriptor format, without even looking at the RESPONSE CODE field in the
returned sense data (to see which format the returned sense data is in).
Considering that there will be broken versions of these applications around
roughly forever, we are stuck with being bug compatible with older kernels.
Cc: stable@vger.kernel.org # 4.19+
Reported-by: Stephan Eisvogel <eisvogel@seitics.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/linux-ide/0bf3f2f0-0fc6-4ba5-a420-c0874ef82d64@heusel.eu/
Fixes: 28ab9769117c ("ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240813131900.1285842-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
According to Wiktionary, the verb "hork" is computing slang defined as
"To foul up; to be occupied with difficulty, tangle, or unpleasantness;
to be broken" (https://en.wiktionary.org/wiki/hork#Verb). libata uses
this with the term "horkage" to refer to broken device features. Given
that this term is not widely used and its meaning unknown to many,
rename it to the more commonly used term "quirk", similar to many other
places in the kernel.
The renaming done is:
1) Rename all ATA_HORKAGE_XXX flags to ATA_QUIRK_XXX
2) Rename struct ata_device horkage field to quirks
3) Rename struct ata_blacklist_entry to struct ata_dev_quirks_entry. The
array of these structures defining quirks for known devices is
renamed __ata_dev_quirks.
4) The functions ata_dev_blacklisted() and ata_force_horkage() are
renamed to ata_dev_quirks() and ata_force_quirks() respectively.
5) All the force_horkage_xxx() macros are renamed to force_quirk_xxx()
And while at it, make sure that the type "unsigned int" is used
consistantly for quirk flags variables and data structure fields.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- ATA PASS-THROUGH sense data cleanups and fixes (Igor Pylypiv)
Store the sense data for ATA PASS-THROUGH commands at the correct
offset in the sense buffer when using fixed format sense data.
Cleanup the logic related to generating sense data for PASS-THROUGH
commands. Generating sense data for PASS-THROUGH commands would
overwrite any eventual (real) sense data received from the device.
Honor the D_SENSE bit when generating sense data for PASS-THROUGH
commands. (The D_SENSE bit can be set by the user, and determines if
the returned sense data should be in fixed format or descriptor
format)
- ata port allocation cleanups (me)
Assign the ata port print_id at port allocation time, such that the
ata_port_* print functions can be used earlier in the init call
chain.
Change the ata port port print_id to use ida_alloc(), such that
print_ids will get reused on rmmod + modprobe, instead of being
incremented indefinitely.
Remove wrappers that only existed in order to export the internal
libata functions which they wrapped, and instead export the libata
functions directly.
- Update SATA_MOBILE_LPM_POLICY Kconfig default to med_power_with_dipm
(Mario Limonciello)
Using this default was not always a good idea before, because it
would break hot plug support. However, with LPM changes in recent
kernels, a port marked as external will not enable LPM (in order to
not break hot plug), so it is now safe to change the default value of
this Kconfig.
All major Linux distros have had SATA_MOBILE_LPM_POLICY set to
med_power_with_dipm for quite a long time
- Convert ahci-fsl-qoriq device tree binding to yaml format (Frank Li)
* tag 'ata-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: ahci-fsl-qoriq: add fsl,ls1046a-ahci and fsl,ls1012a-ahci
ata: ahci: Add debug print for external port
ata,scsi: Remove wrapper ata_sas_port_alloc()
ata: libata-core: Reuse available ata_port print_ids
ata: libata: Assign print_id at port allocation time
ata: libata-core: Remove local_port_no struct member
ata: libata-sata: Remove superfluous assignment in ata_sas_port_alloc()
ata: libata-core: Remove support for decreasing the number of ports
ata: libata: Remove unused function declaration for ata_scsi_detect()
ata,scsi: Remove wrappers ata_sas_tport_{add,delete}()
ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf
ata: libata-core: Set ATA_QCFLAG_RTF_FILLED in fill_result_tf()
ata: libata-scsi: Do not pass ATA device id to ata_to_sense_error()
ata: libata-scsi: Remove redundant sense_buffer memsets
ata: libata-scsi: Honor the D_SENSE bit for CK_COND=1 and no error
ata: libata-scsi: Do not overwrite valid sense data when CK_COND=1
ata: libata-scsi: Fix offsets for the fixed format sense data
dt-bindings: ata: ahci-fsl-qoriq: convert to yaml format
ata: Kconfig: Update SATA_MOBILE_LPM_POLICY default to med_power_with_dipm
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
Pull in bug fixes.
|
|
qc->result_tf contents are only valid when the ATA_QCFLAG_RTF_FILLED flag
is set. The ATA_QCFLAG_RTF_FILLED flag should be always set for commands
that failed or for commands that have the ATA_QCFLAG_RESULT_TF flag set.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-8-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
ATA device id is not used in ata_to_sense_error().
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-6-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
SCSI layer clears sense_buffer in scsi_queue_rq() so there is no need for
libata to clear it again.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240702024735.1152293-5-ipylypiv@google.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
