| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"The kthread code provides an infrastructure which manages the
preferred affinity of unbound kthreads (node or custom cpumask)
against housekeeping (CPU isolation) constraints and CPU hotplug
events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset
isolated partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making
nohz_full= also mutable through cpuset in the future"
* tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits)
doc: Add housekeeping documentation
kthread: Document kthread_affine_preferred()
kthread: Comment on the purpose and placement of kthread_affine_node() call
kthread: Honour kthreads preferred affinity after cpuset changes
sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN
kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management
kthread: Include kthreadd to the managed affinity list
kthread: Include unbound kthreads in the managed affinity list
kthread: Refine naming of affinity related fields
PCI: Remove superfluous HK_TYPE_WQ check
sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated()
cpuset: Remove cpuset_cpu_is_isolated()
timers/migration: Remove superfluous cpuset isolation test
cpuset: Propagate cpuset isolation update to timers through housekeeping
cpuset: Propagate cpuset isolation update to workqueue through housekeeping
PCI: Flush PCI probe workqueue on cpuset isolated partition change
sched/isolation: Flush vmstat workqueues on cpuset isolated partition change
sched/isolation: Flush memcg workqueues on cpuset isolated partition change
cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
|
|
Add a new field async_depth to request_queue and related APIs, this is
currently not used, following patches will convert elevators to use
this instead of internal async_depth.
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are no functional changes, just make code cleaner.
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block subsystem prevents running the workqueue to isolated CPUs,
including those defined by cpuset isolated partitions. Since
HK_TYPE_DOMAIN will soon contain both and be subject to runtime
modifications, synchronize against housekeeping using the relevant lock.
For full support of cpuset changes, the block subsystem may need to
propagate changes to isolated cpumask through the workqueue in the
future.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-block@vger.kernel.org
|
|
blk_execute_rq() with polling is used in kernel code paths such as
NVMe controller connect. The aggressive spinning in blk_hctx_poll()
can prevent the completion task from getting a chance to run, causing
a lockup.
The spinning with cpu_relax() doesn't yield CPU, so need_resched()
only becomes true on timer tick. This causes unnecessary spinning
while the completion task is already waiting to run.
Before commit f22ecf9c14c1, the loop would exit early because
task_is_running() was always true. After that commit removed the
check, the loop now spins until need_resched().
Fix this by using BLK_POLL_ONESHOT in blk_rq_poll_completion(). This
causes blk_hctx_poll() to poll once and return immediately, letting
the outer loop's cond_resched() yield CPU so the completion task can
run.
Fixes: f22ecf9c14c1 ("blk-mq: delete task running check in blk_hctx_poll()")
Cc: Diangang Li <lidiangang@bytedance.com>
Cc: Fengnan Chang <changfengnan@bytedance.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Laptop mode was introduced to save battery, by delaying and consolidating
writes and thereby maximize the time rotating hard drives wouldn't have to
spin.
Luckily, rotating hard drives, with their high spin-up times and power
draw, are a thing of the past for battery-powered devices. Reclaim has
also since changed to not write single filesystem pages anymore, and
regular filesystem writeback is lumpy by design.
The juice doesn't appear worth the squeeze anymore. The footprint of the
feature is small, but nevertheless it's a complicating factor in mm,
block, filesystems. Developers don't think about it, and it likely hasn't
been tested with new reclaim and writeback changes in years.
Let's sunset it. Keep the sysctl with a deprecation warning around for a
few more cycles, but remove all functionality behind it.
[akpm@linux-foundation.org: fix Documentation/admin-guide/laptops/index.rst]
Link: https://lkml.kernel.org/r/20251216185201.GH905277@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a third parameter 'const struct io_comp_batch *' to the rq_end_io_fn
callback signature. This allows end_io handlers to access the completion
batch context when requests are completed via blk_mq_end_request_batch().
The io_comp_batch is passed from blk_mq_end_request_batch(), while NULL
is passed from __blk_mq_end_request() and blk_mq_put_rq_ref() which don't
have batch context.
This infrastructure change enables drivers to detect whether they're
being called from a batched completion path (like iopoll) and access
additional context stored in the io_comp_batch.
Update all rq_end_io_fn implementations:
- block/blk-mq.c: blk_end_sync_rq
- block/blk-flush.c: flush_end_io, mq_flush_data_end_io
- drivers/nvme/host/ioctl.c: nvme_uring_cmd_end_io
- drivers/nvme/host/core.c: nvme_keep_alive_end_io
- drivers/nvme/host/pci.c: abort_endio, nvme_del_queue_end, nvme_del_cq_end
- drivers/nvme/target/passthru.c: nvmet_passthru_req_done
- drivers/scsi/scsi_error.c: eh_lock_door_done
- drivers/scsi/sg.c: sg_rq_end_io
- drivers/scsi/st.c: st_scsi_execute_end
- drivers/target/target_core_pscsi.c: pscsi_req_done
- drivers/md/dm-rq.c: end_clone_request
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On the kernel 6.19-rc, I am experiencing 15-second boot stall in a
virtual machine when probing a virtio-scsi disk:
[ 1.011641] SCSI subsystem initialized
[ 1.013972] virtio_scsi virtio6: 16/0/0 default/read/poll queues
[ 1.015983] scsi host0: Virtio SCSI HBA
[ 1.019578] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[ 1.020225] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[ 1.020228] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[ 1.020230] ahci 0000:00:1f.2: flags: 64bit ncq only
[ 1.024688] scsi host1: ahci
[ 1.025432] scsi host2: ahci
[ 1.025966] scsi host3: ahci
[ 1.026511] scsi host4: ahci
[ 1.028371] scsi host5: ahci
[ 1.028918] scsi host6: ahci
[ 1.029266] ata1: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23100 irq 16 lpm-pol 1
[ 1.029305] ata2: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23180 irq 16 lpm-pol 1
[ 1.029316] ata3: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23200 irq 16 lpm-pol 1
[ 1.029327] ata4: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23280 irq 16 lpm-pol 1
[ 1.029341] ata5: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23300 irq 16 lpm-pol 1
[ 1.029356] ata6: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23380 irq 16 lpm-pol 1
[ 1.118111] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5
[ 1.348916] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.350713] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.351025] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.351160] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.351326] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.351536] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.449153] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 16.483477] sd 0:0:0:0: Power-on or device reset occurred
[ 16.483691] sd 0:0:0:0: [sda] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB)
[ 16.483762] sd 0:0:0:0: [sda] Write Protect is off
[ 16.483877] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.569225] sd 0:0:0:0: [sda] Attached SCSI disk
I bisected it and it is caused by the commit 89e1fb7ceffd which
introduces calls to synchronize_rcu_expedited.
This commit replaces synchronize_rcu_expedited and kfree with a call to
kfree_rcu_mightsleep, avoiding the 15-second delay.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 89e1fb7ceffd ("blk-mq: fix potential uaf for 'queue_hw_ctx'")
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If an hctx has no software ctx mapped, blk_mq_map_swqueue() never
allocates tags and leaves hctx->tags NULL. The CPU hotplug offline
notifier can still run for that hctx, return early since hctx cannot
hold any requests.
Signed-off-by: Cong Zhang <cong.zhang@oss.qualcomm.com>
Fixes: bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are offline")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_hctx_poll() always checks if the task is running or not, and returns
1 if the task is running. This is a leftover from when polled IO was
purely for synchronous IO, and doesn't make sense anymore when polled IO
is purely asynchronous. Similarly, marking the task as TASK_RUNNING is
also superflous, as the very much has to be running to enter the
function in the first place.
It looks like there has been this judgment for historical reasons, and
in very early versions of this function the user would set the process
state to TASK_UNINTERRUPTIBLE.
Signed-off-by: Diangang Li <lidiangang@bytedance.com>
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
[axboe: kill all remnants of task running, pointless now. massage message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_{add,del}_queue_tag_set() functions add and remove queues from
tagset, the functions make sure that tagset and queues are marked as
shared when two or more queues are attached to the same tagset.
Initially a tagset starts as unshared and when the number of added
queues reaches two, blk_mq_add_queue_tag_set() marks it as shared along
with all the queues attached to it. When the number of attached queues
drops to 1 blk_mq_del_queue_tag_set() need to mark both the tagset and
the remaining queues as unshared.
Both functions need to freeze current queues in tagset before setting on
unsetting BLK_MQ_F_TAG_QUEUE_SHARED flag. While doing so, both functions
hold set->tag_list_lock mutex, which makes sense as we do not want
queues to be added or deleted in the process. This used to work fine
until commit 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset")
made the nvme driver quiesce tagset instead of quiscing individual
queues. blk_mq_quiesce_tagset() does the job and quiesce the queues in
set->tag_list while holding set->tag_list_lock also.
This results in deadlock between two threads with these stacktraces:
__schedule+0x47c/0xbb0
? timerqueue_add+0x66/0xb0
schedule+0x1c/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.constprop.0+0x271/0x600
blk_mq_quiesce_tagset+0x25/0xc0
nvme_dev_disable+0x9c/0x250
nvme_timeout+0x1fc/0x520
blk_mq_handle_expired+0x5c/0x90
bt_iter+0x7e/0x90
blk_mq_queue_tag_busy_iter+0x27e/0x550
? __blk_mq_complete_request_remote+0x10/0x10
? __blk_mq_complete_request_remote+0x10/0x10
? __call_rcu_common.constprop.0+0x1c0/0x210
blk_mq_timeout_work+0x12d/0x170
process_one_work+0x12e/0x2d0
worker_thread+0x288/0x3a0
? rescuer_thread+0x480/0x480
kthread+0xb8/0xe0
? kthread_park+0x80/0x80
ret_from_fork+0x2d/0x50
? kthread_park+0x80/0x80
ret_from_fork_asm+0x11/0x20
__schedule+0x47c/0xbb0
? xas_find+0x161/0x1a0
schedule+0x1c/0xa0
blk_mq_freeze_queue_wait+0x3d/0x70
? destroy_sched_domains_rcu+0x30/0x30
blk_mq_update_tag_set_shared+0x44/0x80
blk_mq_exit_queue+0x141/0x150
del_gendisk+0x25a/0x2d0
nvme_ns_remove+0xc9/0x170
nvme_remove_namespaces+0xc7/0x100
nvme_remove+0x62/0x150
pci_device_remove+0x23/0x60
device_release_driver_internal+0x159/0x200
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x112/0x1e0
vfs_write+0x2b1/0x3d0
ksys_write+0x4e/0xb0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
The top stacktrace is showing nvme_timeout() called to handle nvme
command timeout. timeout handler is trying to disable the controller and
as a first step, it needs to blk_mq_quiesce_tagset() to tell blk-mq not
to call queue callback handlers. The thread is stuck waiting for
set->tag_list_lock as it tries to walk the queues in set->tag_list.
The lock is held by the second thread in the bottom stack which is
waiting for one of queues to be frozen. The queue usage counter will
drop to zero after nvme_timeout() finishes, and this will not happen
because the thread will wait for this mutex forever.
Given that [un]quiescing queue is an operation that does not need to
sleep, update blk_mq_[un]quiesce_tagset() to use RCU instead of taking
set->tag_list_lock, update blk_mq_{add,del}_queue_tag_set() to use RCU
safe list operations. Also, delete INIT_LIST_HEAD(&q->tag_set_list)
in blk_mq_del_queue_tag_set() because we can not re-initialize it while
the list is being traversed under RCU. The deleted queue will not be
added/deleted to/from a tagset and it will be freed in blk_free_queue()
after the end of RCU grace period.
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Fixes: 98d81f0df70c ("nvme: use blk_mq_[un]quiesce_tagset")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
During system suspend, wakeup capable IRQs for block device can be
delayed, which can cause blk_mq_hctx_notify_offline() to hang
indefinitely while waiting for pending request to complete.
Skip the request waiting loop and abort suspend when wakeup events are
pending to prevent the deadlock.
Fixes: bf0beec0607d ("blk-mq: drain I/O when all CPUs in a hctx are offline")
Signed-off-by: Cong Zhang <cong.zhang@oss.qualcomm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is just apply Kuai's patch in [1] with mirror changes.
blk_mq_realloc_hw_ctxs() will free the 'queue_hw_ctx'(e.g. undate
submit_queues through configfs for null_blk), while it might still be
used from other context(e.g. switch elevator to none):
t1 t2
elevator_switch
blk_mq_unquiesce_queue
blk_mq_run_hw_queues
queue_for_each_hw_ctx
// assembly code for hctx = (q)->queue_hw_ctx[i]
mov 0x48(%rbp),%rdx -> read old queue_hw_ctx
__blk_mq_update_nr_hw_queues
blk_mq_realloc_hw_ctxs
hctxs = q->queue_hw_ctx
q->queue_hw_ctx = new_hctxs
kfree(hctxs)
movslq %ebx,%rax
mov (%rdx,%rax,8),%rdi ->uaf
This problem was found by code review, and I comfirmed that the concurrent
scenario do exist(specifically 'q->queue_hw_ctx' can be changed during
blk_mq_run_hw_queues()), however, the uaf problem hasn't been repoduced yet
without hacking the kernel.
Sicne the queue is freezed in __blk_mq_update_nr_hw_queues(), fix the
problem by protecting 'queue_hw_ctx' through rcu where it can be accessed
without grabbing 'q_usage_counter'.
[1] https://lore.kernel.org/all/20220225072053.2472431-1-yukuai3@huawei.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After commit 4e5cc99e1e48 ("blk-mq: manage hctx map via xarray"), we use
an xarray instead of array to store hctx, but in poll mode, each time
in blk_mq_poll, we need use xa_load to find corresponding hctx, this
introduce some costs. In my test, xa_load may cost 3.8% cpu.
This patch revert previous change, eliminates the overhead of xa_load
and can result in a 3% performance improvement.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch aims to enable batch allocation of sufficient tags after
batch IO submission with plug mechanism, thereby avoiding the need for
frequent individual requests when the initial allocation is
insufficient.
-----------------------------------------------------------
HW:
16 CPUs/16 poll queues
Disk: Samsung PM9A3 Gen4 3.84T
CMD:
[global]
ioengine=io_uring
group_reporting=1
time_based=1
runtime=1m
refill_buffers=1
norandommap=1
randrepeat=0
fixedbufs=1
registerfiles=1
rw=randread
iodepth=128
iodepth_batch_submit=32
iodepth_batch_complete_min=32
iodepth_batch_complete_max=128
iodepth_low=32
bs=4k
numjobs=1
direct=1
hipri=1
[job1]
filename=/dev/nvme0n1
name=batch_test
------------------------------------------------------------
Perf:
base code: __blk_mq_alloc_requests() 1.47%
patch: __blk_mq_alloc_requests() 0.75%
------------------------------------------------------------
Signed-off-by: hexue <xue01.he@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch introduces a new structure, struct elevator_resources, to
group together all elevator-related resources that share the same
lifetime. As a first step, this change moves the elevator tag pointer
from struct elv_change_ctx into the new struct elevator_resources.
Additionally, rename blk_mq_alloc_sched_tags_batch() and
blk_mq_free_sched_tags_batch() to blk_mq_alloc_sched_res_batch() and
blk_mq_free_sched_res_batch(), respectively. Introduce two new wrapper
helpers, blk_mq_alloc_sched_res() and blk_mq_free_sched_res(), around
blk_mq_alloc_sched_tags() and blk_mq_free_sched_tags().
These changes pave the way for consolidating the allocation and freeing
of elevator-specific resources into common helper functions. This
refactoring improves encapsulation and prepares the code for future
extensions, allowing additional elevator-specific data to be added to
struct elevator_resources without cluttering struct elv_change_ctx.
Subsequent patches will extend struct elevator_resources to include
other elevator-related data.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, the nr_hw_queues update path manages two disjoint xarrays —
one for elevator tags and another for elevator type — both used during
elevator switching. Maintaining these two parallel structures for the
same purpose adds unnecessary complexity and potential for mismatched
state.
This patch unifies both xarrays into a single structure, struct
elv_change_ctx, which holds all per-queue elevator change context. A
single xarray, named elv_tbl, now maps each queue (q->id) in a tagset
to its corresponding elv_change_ctx entry, encapsulating the elevator
tags, type and name references.
This unification simplifies the code, improves maintainability, and
clarifies ownership of per-queue elevator state.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The blk-mq dma iterator has an optimization for requests that align to
the device's iommu merge boundary. This boundary may be larger than the
device's virtual boundary, but the code had been depending on that queue
limit to know ahead of time if the request is guaranteed to align to
that optimization.
Rather than rely on that queue limit, which many devices may not report,
save the lowest set bit of any boundary gap between each segment in the
bio while checking the segments. The request stores the value for
merging and quickly checking per io if the request can use iova
optimizations.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 7f2799c546db ("blk-mq: cleanup shared tags case in
blk_mq_update_nr_requests()") moves blk_mq_tag_update_sched_shared_tags()
before q->nr_requests is updated, however, it's still using the old
q->nr_requests to resize tag depth.
Fix this problem by passing in expected new tag depth.
Fixes: 7f2799c546db ("blk-mq: cleanup shared tags case in blk_mq_update_nr_requests()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-block/20251014130507.4187235-2-clm@meta.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_free_tags() can be called after blk_mq_init_tags(), while
tags->page_list is still not initialized, causing null-ptr-deref.
Fix this problem by initializing tags->page_list at blk_mq_init_tags(),
meanwhile, also free tags directly from error path because there is no
srcu barrier.
Fixes: ad0d05dbddc1 ("blk-mq: Defer freeing of tags page_list to SRCU callback")
Reported-by: syzbot+5c5d41e80248d610221f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68d1b079.a70a0220.1b52b.0000.GAE@google.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Allocate and free sched_tags while queue is freezed can deadlock[1],
this is a long term problem, hence allocate memory before freezing
queue and free memory after queue is unfreezed.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Fixes: e3a2b3f931f5 ("blk-mq: allow changing of queue depth through sysfs")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No functional changes are intended, make code cleaner and prepare to fix
the grow case in following patches.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For shared tags case, all hctx->sched_tags/tags are the same, it doesn't
make sense to call into blk_mq_tag_update_depth() multiple times for the
same tags.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_requests_store() is the only caller of
blk_mq_update_nr_requests(), and blk_mq_update_nr_requests() is the
only caller of blk_mq_tag_update_depth(), however, they all have
checkings for nr_requests input by user.
Make code cleaner by moving all the checkings to the top function:
1) nr_requests > reserved tags;
2) if there is elevator, 4 <= nr_requests <= 2048;
3) if elevator is none, 4 <= nr_requests <= tag_set->queue_depth;
Meanwhile, case 2 is the only case tags can grow and -ENOMEM might be
returned.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
1) queue_requests_store() is the only caller of
blk_mq_update_nr_requests(), where queue is already freezed, no need to
check mq_freeze_depth;
2) q->tag_set must be set for request based device, and queue_is_mq() is
already checked in blk_mq_queue_attr_visible(), no need to check
q->tag_set.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio->issue_time_ns is initialized for every bio, however, it's only used
by blk-iolatency. Add a new queue_flag and only set this flag when
blk-iolatency is enabled, so that extra blk_time_get_ns() can be saved
for disks that blk-iolatency is not enabled.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio->issue_time_ns is only used by blk-iolatency, which can only be
enabled for rq-based disk, hence it's not necessary to initialize
the time for bio-based disk.
Meanwhile, if bio is split by blk_crypto_fallback_split_bio_if_needed(),
the issue time is not initialized for new split bio, this can be fixed
as well.
Noted the next patch will optimize better that bio issue time will
only be used when blk-iolatency is really enabled by the disk.
Fixes: 488f6682c832 ("block: blk-crypto-fallback for Inline Encryption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the spinlock in blk_mq_find_and_get_req() with an SRCU read lock
around the tag iterators.
This is done by:
- Holding the SRCU read lock in blk_mq_queue_tag_busy_iter(),
blk_mq_tagset_busy_iter(), and blk_mq_hctx_has_requests().
- Removing the now-redundant tags->lock from blk_mq_find_and_get_req().
This change fixes lockup issue in scsi_host_busy() in case of shost->host_blocked.
Also avoids big tags->lock when reading disk sysfs attribute `inflight`.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The freeing of the flush queue/request in blk_mq_exit_hctx() can race with
tag iterators that may still be accessing it. To prevent a potential
use-after-free, the deallocation should be deferred until after a grace
period. With this way, we can replace the big tags->lock in tags iterator
code path with srcu for solving the issue.
This patch introduces an SRCU-based deferred freeing mechanism for the
flush queue.
The changes include:
- Adding a `rcu_head` to `struct blk_flush_queue`.
- Creating a new callback function, `blk_free_flush_queue_callback`,
to handle the actual freeing.
- Replacing the direct call to `blk_free_flush_queue()` in
`blk_mq_exit_hctx()` with `call_srcu()`, using the `tags_srcu`
instance to ensure synchronization with tag iterators.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Tag iterators can race with the freeing of the request pages(tags->page_list),
potentially leading to use-after-free issues.
Defer the freeing of the page list and the tags structure itself until
after an SRCU grace period has passed. This ensures that any concurrent
tag iterators have completed before the memory is released. With this
way, we can replace the big tags->lock in tags iterator code path with
srcu for solving the issue.
This is achieved by:
- Adding a new `srcu_struct tags_srcu` to `blk_mq_tag_set` to protect
tag map iteration.
- Adding an `rcu_head` to `struct blk_mq_tags` to be used with
`call_srcu`.
- Moving the page list freeing logic and the `kfree(tags)` call into a
new callback function, `blk_mq_free_tags_callback`.
- In `blk_mq_free_tags`, invoking `call_srcu` to schedule the new
callback for deferred execution.
The read-side protection for the tag iterators will be added in a
subsequent patch.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To prepare for converting the tag->rqs freeing to be SRCU-based, the
tag_set is needed in the freeing helper functions.
This patch adds 'struct blk_mq_tag_set *' as the first parameter to
blk_mq_free_rq_map() and blk_mq_free_tags(), and updates all their call
sites.
This allows access to the tag_set's SRCU structure in the next step,
which will be used to free the tag maps after a grace period.
No functional change is intended in this patch.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move flush queue allocation into blk_mq_init_hctx() and its release into
blk_mq_exit_hctx(), and prepare for replacing tags->lock with SRCU to
draining inflight request walking. blk_mq_exit_hctx() is the last chance
for us to get valid `tag_set` reference, and we need to add one SRCU to
`tag_set` for freeing flush request via call_srcu().
It is safe to move flush queue & request release into blk_mq_exit_hctx(),
because blk_mq_clear_flush_rq_mapping() clears the flush request
reference int driver tags inflight request table, meantime inflight
request walking is drained.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Current depth_updated has some problems:
1) depth_updated() will be called for each hctx, while all elevators
will update async_depth for the disk level, this is not related to hctx;
2) In blk_mq_update_nr_requests(), if previous hctx update succeed and
this hctx update failed, q->nr_requests will not be updated, while
async_depth is already updated with new nr_reqeuests in previous
depth_updated();
3) All elevators are using q->nr_requests to calculate async_depth now,
however, q->nr_requests is still the old value when depth_updated() is
called from blk_mq_update_nr_requests();
Those problems are first from error path, then mq-deadline, and recently
for bfq and kyber, fix those problems by:
- pass in request_queue instead of hctx;
- move depth_updated() after q->nr_requests is updated in
blk_mq_update_nr_requests();
- add depth_updated() call inside init_sched() method to initialize
async_depth;
- remove init_hctx() method for mq-deadline and bfq that is useless now;
Fixes: 77f1e0a52d26 ("bfq: update internal depth state when queue depth changes")
Fixes: 39823b47bbd4 ("block/mq-deadline: Fix the tag reservation code")
Fixes: 42e6c6ce03fd ("lib/sbitmap: convert shallow_depth from one word to the whole sbitmap")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 5989bfe6ac6b ("block: restore two stage elevator switch while
running nr_hw_queue update") reintroduced a lockdep warning by calling
blk_mq_freeze_queue_nomemsave() before switching the I/O scheduler.
The function blk_mq_elv_switch_none() calls elevator_change_done().
Running this while the queue is frozen causes a lockdep warning.
Fix this by reordering the operations: first, switch the I/O scheduler
to 'none', and then freeze the queue. This ensures that elevator_change_done()
is not called on an already frozen queue. And this way is safe because
elevator_set_none() does freeze queue before switching to none.
Also we still have to rely on blk_mq_elv_switch_back() for switching
back, and it has to cover unfrozen queue case.
Cc: Nilay Shroff <nilay@linux.ibm.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Fixes: 5989bfe6ac6b ("block: restore two stage elevator switch while running nr_hw_queue update")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250815131737.331692-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move scheduler tags (sched_tags) allocation and deallocation outside
both the ->elevator_lock and ->freeze_lock when updating nr_hw_queues.
This change breaks the dependency chain from the percpu allocator lock
to the elevator lock, helping to prevent potential deadlocks, as
observed in the reported lockdep splat[1].
This commit introduces batch allocation and deallocation helpers for
sched_tags, which are now used from within __blk_mq_update_nr_hw_queues
routine while iterating through the tagset.
With this change, all sched_tags memory management is handled entirely
outside the ->elevator_lock and the ->freeze_lock context, thereby
eliminating the lock dependency that could otherwise manifest during
nr_hw_queues updates.
[1] https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Reported-by: Stefan Haberland <sth@linux.ibm.com>
Closes: https://lore.kernel.org/all/0659ea8d-a463-47c8-9180-43c719e106eb@linux.ibm.com/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250730074614.2537382-4-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The kmemleak reports memory leaks related to elevator resources that
were originally allocated in the ->init_hctx() method. The following
leak traces are observed after running blktests block/040:
unreferenced object 0xffff8881b82f7400 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f6000 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
unreferenced object 0xffff8881b82f5800 (size 512):
comm "check", pid 68454, jiffies 4310588881
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 5bac8b34):
__kvmalloc_node_noprof+0x55d/0x7a0
sbitmap_init_node+0x15a/0x6a0
kyber_init_hctx+0x316/0xb90
blk_mq_init_sched+0x419/0x580
elevator_switch+0x18b/0x630
elv_update_nr_hw_queues+0x219/0x2c0
__blk_mq_update_nr_hw_queues+0x36a/0x6f0
blk_mq_update_nr_hw_queues+0x3a/0x60
0xffffffffc09ceb80
0xffffffffc09d7e0b
configfs_write_iter+0x2b1/0x470
vfs_write+0x527/0xe70
ksys_write+0xff/0x200
do_syscall_64+0x98/0x3c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The issue arises while we run nr_hw_queue update, Specifically, we first
reallocate hardware contexts (hctx) via __blk_mq_realloc_hw_ctxs(), and
then later invoke elevator_switch() (assuming q->elevator is not NULL).
The elevator switch code would first exit old elevator (elevator_exit)
and then switches to the new elevator. The elevator_exit loops through
each hctx and invokes the elevator’s per-hctx exit method ->exit_hctx(),
which releases resources allocated during ->init_hctx().
This memleak manifests when we reduce the num of h/w queues - for example,
when the initial update sets the number of queues to X, and a later update
reduces it to Y, where Y < X. In this case, we'd loose the access to old
hctxs while we get to elevator exit code because __blk_mq_realloc_hw_ctxs
would have already released the old hctxs. As we don't now have any
reference left to the old hctxs, we don't have any way to free the
scheduler resources (which are allocate in ->init_hctx()) and kmemleak
complains about it.
This issue was caused due to the commit 596dce110b7d ("block: simplify
elevator reattachment for updating nr_hw_queues"). That change unified
the two-stage elevator teardown and reattachment into a single call that
occurs after __blk_mq_realloc_hw_ctxs() has already freed the hctxs.
This patch restores the previous two-stage elevator switch logic during
nr_hw_queues updates. First, the elevator is switched to 'none', which
ensures all scheduler resources are properly freed. Then, the hardware
contexts (hctxs) are reallocated, and the software-to-hardware queue
mappings are updated. Finally, the original elevator is reattached. This
sequence prevents loss of references to old hctxs and avoids the scheduler
resource leaks reported by kmemleak.
Reported-by : Yi Zhang <yi.zhang@redhat.com>
Fixes: 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")
Closes: https://lore.kernel.org/all/CAHj4cs8oJFvz=daCvjHM5dYCNQH4UXwSySPPU4v-WHce_kZXZA@mail.gmail.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250724102540.1366308-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_zone_update_request_bio() does two things. First it checks if the
request to be completed was written via ZONE APPEND and if yes it then
updates the sector to the one that the data was written to.
This is small enough to be an inline function. But upcoming changes adding
a tracepoint don't work if the function is inlined.
Split the function into two, the first is blk_req_bio_is_zone_append()
checking if the sector needs to be updated. This can still be an inline
function. The second is blk_zone_append_update_request_bio() doing the
sector update.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250715115324.53308-3-johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for fixing device mapper zone write handling, introduce
the inline helper function bio_needs_zone_write_plugging() to test if a
BIO requires handling through zone write plugging using the function
blk_zone_plug_bio(). This function returns true for any write
(op_is_write(bio) == true) operation directed at a zoned block device
using zone write plugging, that is, a block device with a disk that has
a zone write plug hash table.
This helper allows simplifying the check on entry to blk_zone_plug_bio()
and used in to protect calls to it for blk-mq devices and DM devices.
Fixes: f211268ed1f9 ("dm: Use the block layer zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250625093327.548866-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.16/block
Pull MD changes from Yu Kuai:
- Fix that normal IO can be starved by sync IO, found by mkfs on newly
created large raid5, with some clean up patches for bdev inflight
counters.
* tag 'md-6.16-20250513' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md: clean up accounting for issued sync IO
md: fix is_mddev_idle()
md: add a new api sync_io_depth
md: record dm-raid gendisk in mddev
block: export API to get the number of bdev inflight IO
block: clean up blk_mq_in_flight_rw()
block: WARN if bdev inflight counter is negative
block: reuse part_in_flight_rw for part_in_flight
blk-mq: remove blk_mq_in_flight()
|
|
In __blk_mq_update_nr_hw_queues(), the current sequence involves:
1. unregistering sysfs/debugfs attributes
2. freeze the queue
3. reallocating the tag set
4. updating the queue map
5. reallocating hardware contexts
6. updating the elevator (which unfreeze the queue again)
7. re-register sysfs/debugfs attributes
If tag set reallocation fails at step 3, the function skips steps 4–6
and proceeds directly to step 7, re-registering the sysfs/debugfs
attributes without unfreezing the queue first. This is incorrect and
can lead to a system hang or lockdep splat, as the queue remains frozen
and is never properly unfrozen.
This patch addresses the issue by explicitly unfreezing the queue before
re-registering the sysfs/debugfs attributes in the event of a tag set
reallocation failure.
Fixes: 9dc7a882ce96 ("block: move hctx debugfs/sysfs registering out of freezing queue")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250512092952.135887-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Also add comment for part_inflight_show() for the difference between
bio-based and rq-based device.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-4-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
After commit 7be835694dae ("block: fix that util can be greater than
100%"), it's not used and can be removed.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Move hctx cpuhp add/del out of queue freezing for not connecting freeze
lock with cpuhp locks, then lockdep warning can be avoided.
This way is safe because both needn't queue to be frozen and scheduler
switch isn't allowed, with same reason for moving hctx debugfs/sysfs
register out of queue freeze.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-25-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_realloc_hw_ctxs
Both blk_mq_map_swqueue() and blk_mq_realloc_hw_ctxs() are called before
the request queue is added to tagset list, so the two won't run concurrently
with blk_mq_update_nr_hw_queues().
When the two functions are only called from queue initialization or
blk_mq_update_nr_hw_queues(), elevator switch can't happen.
So remove ->elevator_lock uses from the two functions.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-24-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move hctx debugfs/sysfs register out of freezing queue in
__blk_mq_update_nr_hw_queues(), so that the following lockdep dependency
can be killed:
#2 (&q->q_usage_counter(io)#16){++++}-{0:0}:
#1 (fs_reclaim){+.+.}-{0:0}:
#0 (&sb->s_type->i_mutex_key#3){+.+.}-{4:4}: //debugfs
And registering/un-registering hctx debugfs/sysfs does not require queue to
be frozen:
- hctx sysfs attributes show() are drained when removing kobject, and
there isn't store() implementation for hctx sysfs attributes
- debugfs entry read() is drained too when removing debugfs directory,
and there isn't write() implementation for hctx debugfs too
- so it is safe to register/unregister hctx sysfs/debugfs without
freezing queue because the cod paths changes nothing, and we just
need to keep hctx live
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-23-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move elv_register[unregister]_queue out of ->elevator_lock & queue freezing,
so we can kill many lockdep warnings.
elv_register[unregister]_queue() is serialized, and just dealing with sysfs/
debugfs things, no need to be done with queue frozen:
- when it is called from adding disk, elevator switch isn't possible
because ->queue_kobj isn't added yet
- when it is called from deleting disk, disable_elv_switch() is
responsible for preventing new elevator switch and draining old
elevator switch.
- when it is called from blk_mq_update_nr_hw_queues(), adding/removing
disk and elevator switch can't be allowed or in-progress
With this change, elevator's ->exit() is called before calling
elv_unregister_queue, then user may call into ->show()/store() of elevator's
sysfs attributes, and we have covered this issue by adding `ELEVATOR_FLAG_DYNG`.
For blk-mq debugfs, hctx->sched_tags is always checked with ->elevator_lock by
debugfs code, meantime hctx->sched_tags is updated with ->elevator_lock, so
there isn't such issue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-22-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In blk_mq_update_nr_hw_queues(), nr_hw_queues changes and elevator data
depends on it, and elevator has to be reattached, so call elevator_switch()
to force attachment.
Add elv_update_nr_hw_queues() simply for blk_mq_update_nr_hw_queues() to
reattach elevator, since elevator switch isn't likely when running
blk_mq_update_nr_hw_queues(). This way removes the current switch
none and switch back code.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
That makes the function nicely self-contained and can be used
to avoid code duplication.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
