| Age | Commit message (Collapse) | Author |
|---|
|
In most cases, the use of "fast 32-bit system call" depends either on
X86_FEATURE_SEP or X86_FEATURE_SYSENTER32 || X86_FEATURE_SYSCALL32.
However, nearly all the logic for both is identical.
Define X86_FEATURE_SYSFAST32 which indicates that *either* SYSENTER32 or
SYSCALL32 should be used, for either 32- or 64-bit kernels. This
defaults to SYSENTER; use SYSCALL if the SYSCALL32 bit is also set.
As this removes ALL existing uses of X86_FEATURE_SYSENTER32, which is
a kernel-only synthetic feature bit, simply remove it and replace it
with X86_FEATURE_SYSFAST32.
This leaves an unused alternative for a true 32-bit kernel, but that
should really not matter in any way.
The clearing of X86_FEATURE_SYSCALL32 can be removed once the patches
for automatically clearing disabled features has been merged.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251216212606.1325678-10-hpa@zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Dave Hansen:
"The biggest thing of note here is Linear Address Space Separation
(LASS). It represents the first time I can think of that the
upper=>kernel/lower=>user address space convention is actually
recognized by the hardware on x86. It ensures that userspace can not
even get the hardware to _start_ page walks for the kernel address
space. This, of course, is a really nice generic side channel defense.
This is really only a down payment on LASS support. There are still
some details to work out in its interaction with EFI calls and
vsyscall emulation. For now, LASS is disabled if either of those
features is compiled in (which is almost always the case).
There's also one straggler commit in here which converts an
under-utilized AMD CPU feature leaf into a generic Linux-defined leaf
so more feature can be packed in there.
Summary:
- Enable Linear Address Space Separation (LASS)
- Change X86_FEATURE leaf 17 from an AMD leaf to Linux-defined"
* tag 'x86_cpu_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable LASS during CPU initialization
selftests/x86: Update the negative vsyscall tests to expect a #GP
x86/traps: Communicate a LASS violation in #GP message
x86/kexec: Disable LASS during relocate kernel
x86/alternatives: Disable LASS when patching kernel code
x86/asm: Introduce inline memcpy and memset
x86/cpu: Add an LASS dependency on SMAP
x86/cpufeatures: Enumerate the LASS feature bits
x86/cpufeatures: Make X86_FEATURE leaf 17 Linux-specific
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"The most significant are some changes to ensure that symbols exported
for KVM are used only by KVM modules themselves, along with some
related cleanups.
In true x86/misc fashion, the other patch is completely unrelated and
just enhances an existing pr_warn() to make it clear to users how they
have tainted their kernel when something is mucking with MSRs.
Summary:
- Make MSR-induced taint easier for users to track down
- Restrict KVM-specific exports to KVM itself"
* tag 'x86_misc_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Restrict KVM-induced symbol exports to KVM modules where obvious/possible
x86/mm: Drop unnecessary export of "ptdump_walk_pgd_level_debugfs"
x86/mtrr: Drop unnecessary export of "mtrr_state"
x86/bugs: Drop unnecessary export of "x86_spec_ctrl_base"
x86/msr: Add CPU_OUT_OF_SPEC taint name to "unrecognized" pr_warn(msg)
|
|
Linear Address Space Separation (LASS) mitigates a class of side-channel
attacks that rely on speculative access across the user/kernel boundary.
Enable LASS along with similar security features if the platform
supports it.
While at it, remove the comment above the SMAP/SMEP/UMIP/LASS setup
instead of updating it, as the whole sequence is quite self-explanatory.
Some EFI runtime and boot services may rely on 1:1 mappings in the lower
half during early boot and even after SetVirtualAddressMap(). To avoid
tripping LASS, the initial CR4 programming would need to be delayed
until EFI has completely finished entering virtual mode (including
efi_free_boot_services()). Also, LASS would need to be temporarily
disabled while switching to efi_mm to avoid potential faults on stray
runtime accesses.
Similarly, legacy vsyscall page accesses are flagged by LASS resulting
in a #GP (instead of a #PF). Without LASS, the #PF handler emulates the
accesses and returns the appropriate values. Equivalent emulation
support is required in the #GP handler with LASS enabled. In case of
vsyscall XONLY (execute only) mode, the faulting address is readily
available in the RIP which would make it easier to reuse the #PF
emulation logic.
For now, keep it simple and disable LASS if either of those are compiled
in. Though not ideal, this makes it easier to start testing LASS support
in some environments. In future, LASS support can easily be expanded to
support EFI and legacy vsyscalls.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20251118182911.2983253-9-sohil.mehta%40intel.com
|
|
Extend KVM's export macro framework to provide EXPORT_SYMBOL_FOR_KVM(),
and use the helper macro to export symbols for KVM throughout x86 if and
only if KVM will build one or more modules, and only for those modules.
To avoid unnecessary exports when CONFIG_KVM=m but kvm.ko will not be
built (because no vendor modules are selected), let arch code #define
EXPORT_SYMBOL_FOR_KVM to suppress/override the exports.
Note, the set of symbols to restrict to KVM was generated by manual search
and audit; any "misses" are due to human error, not some grand plan.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251112173944.1380633-5-seanjc%40google.com
|
|
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b3d ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b3d ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
That cpuinfo_x86.x86_capability[] element was supposed to mirror CPUID flags
from CPUID_0x80000007_EBX but that leaf has still to this day only three bits
defined in it. So move those bits to scattered.c and free the capability
element for synthetic flags.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Unify and refactor the MCA arch side and better separate code
- Cleanup and simplify the AMD RAS side, unify code, drop unused stuff
* tag 'ras_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Add a clear_bank() helper
x86/mce: Move machine_check_poll() status checks to helper functions
x86/mce: Separate global and per-CPU quirks
x86/mce: Do 'UNKNOWN' vendor check early
x86/mce: Define BSP-only SMCA init
x86/mce: Define BSP-only init
x86/mce: Set CR4.MCE last during init
x86/mce: Remove __mcheck_cpu_init_early()
x86/mce: Cleanup bank processing on init
x86/mce/amd: Put list_head in threshold_bank
x86/mce/amd: Remove smca_banks_map
x86/mce/amd: Remove return value for mce_threshold_{create,remove}_device()
x86/mce/amd: Rename threshold restart function
|
|
Currently, MCA initialization is executed identically on each CPU as
they are brought online. However, a number of MCA initialization tasks
only need to be done once.
Define a function to collect all 'global' init tasks and call this from
the BSP only. Start with CPU features.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250908-wip-mca-updates-v6-0-eef5d6c74b9c@amd.com
|
|
These old CPUs are not tested against VMSCAPE, but are likely vulnerable.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
The VMSCAPE vulnerability may allow a guest to cause Branch Target
Injection (BTI) in userspace hypervisors.
Kernels (both host and guest) have existing defenses against direct BTI
attacks from guests. There are also inter-process BTI mitigations which
prevent processes from attacking each other. However, the threat in this
case is to a userspace hypervisor within the same process as the attacker.
Userspace hypervisors have access to their own sensitive data like disk
encryption keys and also typically have access to all guest data. This
means guest userspace may use the hypervisor as a confused deputy to attack
sensitive guest kernel data. There are no existing mitigations for these
attacks.
Introduce X86_BUG_VMSCAPE for this vulnerability and set it on affected
Intel and AMD CPUs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Implement support for embedding EFI SBAT data (Secure Boot Advanced
Targeting: a secure boot image revocation facility) on x86 (Vitaly
Kuznetsov)
- Move the efi_enter_virtual_mode() initialization call from the
generic init code to x86 init code (Alexander Shishkin)
* tag 'x86-boot-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Implement support for embedding SBAT data for x86
x86/efi: Move runtime service initialization to arch/x86
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU speculation fixes from Borislav Petkov:
"Add the mitigation logic for Transient Scheduler Attacks (TSA)
TSA are new aspeculative side channel attacks related to the execution
timing of instructions under specific microarchitectural conditions.
In some cases, an attacker may be able to use this timing information
to infer data from other contexts, resulting in information leakage.
Add the usual controls of the mitigation and integrate it into the
existing speculation bugs infrastructure in the kernel"
* tag 'tsa_x86_bugs_for_6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/process: Move the buffer clearing before MONITOR
x86/microcode/AMD: Add TSA microcode SHAs
KVM: SVM: Advertise TSA CPUID bits to guests
x86/bugs: Add a Transient Scheduler Attacks mitigation
x86/bugs: Rename MDS machinery to something more generic
|
|
Initialize DR7 by writing its architectural reset value to always set
bit 10, which is reserved to '1', when "clearing" DR7 so as not to
trigger unanticipated behavior if said bit is ever unreserved, e.g. as
a feature enabling flag with inverted polarity.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-3-xin%40zytor.com
|
|
Initialize DR6 by writing its architectural reset value to avoid
incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads
to a false bus lock detected warning.
The Intel SDM says:
1) Certain debug exceptions may clear bits 0-3 of DR6.
2) BLD induced #DB clears DR6.BLD and any other debug exception
doesn't modify DR6.BLD.
3) RTM induced #DB clears DR6.RTM and any other debug exception
sets DR6.RTM.
To avoid confusion in identifying debug exceptions, debug handlers
should set DR6.BLD and DR6.RTM, and clear other DR6 bits before
returning.
The DR6 architectural reset value 0xFFFF0FF0, already defined as
macro DR6_RESERVED, satisfies these requirements, so just use it to
reinitialize DR6 whenever needed.
Since clear_all_debug_regs() no longer zeros all debug registers,
rename it to initialize_debug_regs() to better reflect its current
behavior.
Since debug_read_clear_dr6() no longer clears DR6, rename it to
debug_read_reset_dr6() to better reflect its current behavior.
Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock")
Reported-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
|
|
The EFI call in start_kernel() is guarded by #ifdef CONFIG_X86. Move
the thing to the arch_cpu_finalize_init() path on x86 and get rid of
the #ifdef in start_kernel().
No functional change intended.
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/all/20250620135325.3300848-5-kirill.shutemov%40linux.intel.com
|
|
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
|
|
In order to let all the APIs under <cpuid/api.h> have a shared "cpuid_"
namespace, rename have_cpuid_p() to cpuid_feature().
Adjust all call-sites accordingly.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-4-darwi@linutronix.de
|
|
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
|
|
Conflicts:
Documentation/admin-guide/hw-vuln/index.rst
arch/x86/include/asm/cpufeatures.h
arch/x86/kernel/alternative.c
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/common.c
drivers/base/cpu.c
include/linux/cpu.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Conflicts:
arch/x86/boot/startup/sme.c
arch/x86/coco/sev/core.c
arch/x86/kernel/fpu/core.c
arch/x86/kernel/fpu/xstate.c
Semantic conflict:
arch/x86/include/asm/sev-internal.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947bab0 Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Conflicts:
arch/x86/kernel/cpu/bugs.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
Ice Lake generation CPUs are not affected by guest/host isolation part of
ITS. If a user is only concerned about KVM guests, they can now choose a
new cmdline option "vmexit" that will not deploy the ITS mitigation when
CPU is not affected by guest/host isolation. This saves the performance
overhead of ITS mitigation on Ice Lake gen CPUs.
When "vmexit" option selected, if the CPU is affected by ITS guest/host
isolation, the default ITS mitigation is deployed.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
ITS bug in some pre-Alderlake Intel CPUs may allow indirect branches in the
first half of a cache line get predicted to a target of a branch located in
the second half of the cache line.
Set X86_BUG_ITS on affected CPUs. Mitigation to follow in later commits.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Classic BPF programs can be run by unprivileged users, allowing
unprivileged code to execute inside the kernel. Attackers can use this to
craft branch history in kernel mode that can influence the target of
indirect branches.
BHI_DIS_S provides user-kernel isolation of branch history, but cBPF can be
used to bypass this protection by crafting branch history in kernel mode.
To stop intra-mode attacks via cBPF programs, Intel created a new
instruction Indirect Branch History Fence (IBHF). IBHF prevents the
predicted targets of subsequent indirect branches from being influenced by
branch history prior to the IBHF. IBHF is only effective while BHI_DIS_S is
enabled.
Add the IBHF instruction to cBPF jitted code's exit path. Add the new fence
when the hardware mitigation is enabled (i.e., X86_FEATURE_CLEAR_BHB_HW is
set) or after the software sequence (X86_FEATURE_CLEAR_BHB_LOOP) is being
used in a virtual machine. Note that X86_FEATURE_CLEAR_BHB_HW and
X86_FEATURE_CLEAR_BHB_LOOP are mutually exclusive, so the JIT compiler will
only emit the new fence, not the SW sequence, when X86_FEATURE_CLEAR_BHB_HW
is set.
Hardware that enumerates BHI_NO basically has BHI_DIS_S protections always
enabled, regardless of the value of BHI_DIS_S. Since BHI_DIS_S doesn't
protect against intra-mode attacks, enumerate BHI bug on BHI_NO hardware as
well.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
CPUID(0x80000000).EAX returns the max extended CPUID leaf available. On
x86-32 machines without an extended CPUID range, a CPUID(0x80000000)
query will just repeat the output of the last valid standard CPUID leaf
on the CPU; i.e., a garbage values. Current tip:x86/cpu code protects against
this by doing:
eax = cpuid_eax(0x80000000);
c->extended_cpuid_level = eax;
if ((eax & 0xffff0000) == 0x80000000) {
// CPU has an extended CPUID range. Check for 0x80000001
if (eax >= 0x80000001) {
cpuid(0x80000001, ...);
}
}
This is correct so far. Afterwards though, the same possibly broken EAX
value is used to check the availability of other extended CPUID leaves:
if (c->extended_cpuid_level >= 0x80000007)
...
if (c->extended_cpuid_level >= 0x80000008)
...
if (c->extended_cpuid_level >= 0x8000000a)
...
if (c->extended_cpuid_level >= 0x8000001f)
...
which is invalid. Fix this by immediately setting the CPU's max extended
CPUID leaf to zero if CPUID(0x80000000).EAX doesn't indicate a valid
CPUID extended range.
While at it, add a comment, similar to kernel/head_32.S, clarifying the
CPUID(0x80000000) sanity check.
References: 8a50e5135af0 ("x86-32: Use symbolic constants, safer CPUID when enabling EFER.NX")
Fixes: 3da99c977637 ("x86: make (early)_identify_cpu more the same between 32bit and 64 bit")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250506050437.10264-3-darwi@linutronix.de
|
|
Add aliases for all the data objects that the startup code references -
this is needed so that this code can be moved into its own confined area
where it can only access symbols that have a __pi_ prefix.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250504095230.2932860-39-ardb+git@google.com
|
|
The third argument in wrmsr(msr, low, 0) is unnecessary. Instead, use
wrmsrq(msr, low), which automatically sets the higher 32 bits of the
MSR value to 0.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-15-xin@zytor.com
|
|
__rdmsr() is the lowest level MSR write API, with native_rdmsr()
and native_rdmsrq() serving as higher-level wrappers around it.
#define native_rdmsr(msr, val1, val2) \
do { \
u64 __val = __rdmsr((msr)); \
(void)((val1) = (u32)__val); \
(void)((val2) = (u32)(__val >> 32)); \
} while (0)
static __always_inline u64 native_rdmsrq(u32 msr)
{
return __rdmsr(msr);
}
However, __rdmsr() continues to be utilized in various locations.
MSR APIs are designed for different scenarios, such as native or
pvops, with or without trace, and safe or non-safe. Unfortunately,
the current MSR API names do not adequately reflect these factors,
making it challenging to select the most appropriate API for
various situations.
To pave the way for improving MSR API names, convert __rdmsr()
uses to native_rdmsrq() to ensure consistent usage. Later, these
APIs can be renamed to better reflect their implications, such as
native or pvops, with or without trace, and safe or non-safe.
No functional change intended.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-10-xin@zytor.com
|
|
Old microcode is bad for users and for kernel developers.
For users, it exposes them to known fixed security and/or functional
issues. These obviously rarely result in instant dumpster fires in
every environment. But it is as important to keep your microcode up
to date as it is to keep your kernel up to date.
Old microcode also makes kernels harder to debug. A developer looking
at an oops need to consider kernel bugs, known CPU issues and unknown
CPU issues as possible causes. If they know the microcode is up to
date, they can mostly eliminate known CPU issues as the cause.
Make it easier to tell if CPU microcode is out of date. Add a list
of released microcode. If the loaded microcode is older than the
release, tell users in a place that folks can find it:
/sys/devices/system/cpu/vulnerabilities/old_microcode
Tell kernel kernel developers about it with the existing taint
flag:
TAINT_CPU_OUT_OF_SPEC
== Discussion ==
When a user reports a potential kernel issue, it is very common
to ask them to reproduce the issue on mainline. Running mainline,
they will (independently from the distro) acquire a more up-to-date
microcode version list. If their microcode is old, they will
get a warning about the taint and kernel developers can take that
into consideration when debugging.
Just like any other entry in "vulnerabilities/", users are free to
make their own assessment of their exposure.
== Microcode Revision Discussion ==
The microcode versions in the table were generated from the Intel
microcode git repo:
8ac9378a8487 ("microcode-20241112 Release")
which as of this writing lags behind the latest microcode-20250211.
It can be argued that the versions that the kernel picks to call "old"
should be a revision or two old. Which specific version is picked is
less important to me than picking *a* version and enforcing it.
This repository contains only microcode versions that Intel has deemed
to be OS-loadable. It is quite possible that the BIOS has loaded a
newer microcode than the latest in this repo. If this happens, the
system is considered to have new microcode, not old.
Specifically, the sysfs file and taint flag answer the question:
Is the CPU running on the latest OS-loadable microcode,
or something even later that the BIOS loaded?
In other words, Intel never publishes an authoritative list of CPUs
and latest microcode revisions. Until it does, this is the best that
Linux can do.
Also note that the "intel-ucode-defs.h" file is simple, ugly and
has lots of magic numbers. That's on purpose and should allow a
single file to be shared across lots of stable kernel regardless of if
they have the new "VFM" infrastructure or not. It was generated with
a dumb script.
== FAQ ==
Q: Does this tell me if my system is secure or insecure?
A: No. It only tells you if your microcode was old when the
system booted.
Q: Should the kernel warn if the microcode list itself is too old?
A: No. New kernels will get new microcode lists, both mainline
and stable. The only way to have an old list is to be running
an old kernel in which case you have bigger problems.
Q: Is this for security or functional issues?
A: Both.
Q: If a given microcode update only has functional problems but
no security issues, will it be considered old?
A: Yes. All microcode image versions within a microcode release
are treated identically. Intel appears to make security
updates without disclosing them in the release notes. Thus,
all updates are considered to be security-relevant.
Q: Who runs old microcode?
A: Anybody with an old distro. This happens all the time inside
of Intel where there are lots of weird systems in labs that
might not be getting regular distro updates and might also
be running rather exotic microcode images.
Q: If I update my microcode after booting will it stop saying
"Vulnerable"?
A: No. Just like all the other vulnerabilies, you need to
reboot before the kernel will reassess your vulnerability.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/20250421195659.CF426C07%40davehans-spike.ostc.intel.com
(cherry picked from commit 9127865b15eb0a1bd05ad7efe29489c44394bdc1)
|
|
Whack this thing because:
- the "unknown" handling is done only for this vuln and not for the
others
- it doesn't do anything besides reporting things differently. It
doesn't apply any mitigations - it is simply causing unnecessary
complications to the code which don't bring anything besides
maintenance overhead to what is already a very nasty spaghetti pile
- all the currently unaffected CPUs can also be in "unknown" status so
there's no need for special handling here
so get rid of it.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: David Kaplan <david.kaplan@amd.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/r/20250414150951.5345-1-bp@kernel.org
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 speculation mitigation updates from Borislav Petkov:
- Some preparatory work to convert the mitigations machinery to
mitigating attack vectors instead of single vulnerabilities
- Untangle and remove a now unneeded X86_FEATURE_USE_IBPB flag
- Add support for a Zen5-specific SRSO mitigation
- Cleanups and minor improvements
* tag 'x86_bugs_for_v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Make spectre user default depend on MITIGATION_SPECTRE_V2
x86/bugs: Use the cpu_smt_possible() helper instead of open-coded code
x86/bugs: Add AUTO mitigations for mds/taa/mmio/rfds
x86/bugs: Relocate mds/taa/mmio/rfds defines
x86/bugs: Add X86_BUG_SPECTRE_V2_USER
x86/bugs: Remove X86_FEATURE_USE_IBPB
KVM: nVMX: Always use IBPB to properly virtualize IBRS
x86/bugs: Use a static branch to guard IBPB on vCPU switch
x86/bugs: Remove the X86_FEATURE_USE_IBPB check in ib_prctl_set()
x86/mm: Remove X86_FEATURE_USE_IBPB checks in cond_mitigation()
x86/bugs: Move the X86_FEATURE_USE_IBPB check into callers
x86/bugs: KVM: Add support for SRSO_MSR_FIX
|
|
Currently, the cpuid_deps[] table is only exercised when a particular
feature is explicitly disabled and clear_cpu_cap() is called. However,
some of these listed dependencies might already be missing during boot.
These types of errors shouldn't generally happen in production
environments, but they could sometimes sneak through, especially when
VMs and Kconfigs are in the mix. Also, the kernel might introduce
artificial dependencies between unrelated features, such as making LAM
depend on LASS.
Unexpected failures can occur when the kernel tries to use such
features. Add a simple boot-time scan of the cpuid_deps[] table to
detect the missing dependencies. One option is to disable all of such
features during boot, but that may cause regressions in existing
systems. For now, just warn about the missing dependencies to create
awareness.
As a trade-off between spamming the kernel log and keeping track of all
the features that have been warned about, only warn about the first
missing dependency. Any subsequent unmet dependency will only be logged
after the first one has been resolved.
Features are typically represented through unsigned integers within the
kernel, though some of them have user-friendly names if they are exposed
via /proc/cpuinfo.
Show the friendlier name if available, otherwise display the
X86_FEATURE_* numerals to make it easier to identify the feature.
Suggested-by: Tony Luck <tony.luck@intel.com>
Suggested-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250313201608.3304135-1-sohil.mehta@intel.com
|
|
The affected CPU table (cpu_vuln_blacklist) marks Alderlake and Raptorlake
P-only parts affected by RFDS. This is not true because only E-cores are
affected by RFDS. With the current family/model matching it is not possible
to differentiate the unaffected parts, as the affected and unaffected
hybrid variants have the same model number.
Add a cpu-type match as well for such parts so as to exclude P-only parts
being marked as affected.
Note, family/model and cpu-type enumeration could be inaccurate in
virtualized environments. In a guest affected status is decided by RFDS_NO
and RFDS_CLEAR bits exposed by VMMs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250311-add-cpu-type-v8-5-e8514dcaaff2@linux.intel.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-11-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-10-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-9-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-6-brgerst@gmail.com
|
|
No functional change.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-4-brgerst@gmail.com
|
|
Also change the alignment of the percpu hot section:
- PERCPU_SECTION(INTERNODE_CACHE_BYTES)
+ PERCPU_SECTION(L1_CACHE_BYTES)
As vSMP will muck with INTERNODE_CACHE_BYTES that invalidates the
too-large-section assert we do:
ASSERT(__per_cpu_hot_end - __per_cpu_hot_start <= 64, "percpu cache hot section too large")
[ mingo: Added INTERNODE_CACHE_BYTES fix & explanation. ]
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250303165246.2175811-3-brgerst@gmail.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
smp_store_cpu_info() is just a wrapper around identify_secondary_cpu()
without further value.
Move the extra bits from smp_store_cpu_info() into identify_secondary_cpu()
and remove the wrapper.
[ darwi: Make it compile and fix up the xen/smp_pv.c instance ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-9-darwi@linutronix.de
|
|
Commit:
e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU")
introduced u16 "info" arrays for each TLB type.
Since 2012 and each array stores just one type of information: the
number of TLB entries for its respective TLB type.
Replace such arrays with simple variables.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250304085152.51092-8-darwi@linutronix.de
|
