Merge branch 'newsoc/axiado' into soc/newsoc

Support for the AX3000 SoC, from Harshit Shah <hshah@axiado.com>:

The AX3000 is a multi-core system-on-chip featuring four ARM Cortex-A53
cores, secure vault, hardware firewall, and AI acceleration engines. This
initial support enables basic bring-up of the SoC and evaluation platform
with CPU, timer, UART, and I3C functionality.

The series begins by adding the "axiado" vendor prefix and compatible
strings for the SoC and board. It then introduces the device tree files
and minimal ARCH_AXIADO platform support in arm64.

* newsoc/axiado:
  MAINTAINERS: Add entry for Axiado
  arm64: defconfig: enable the Axiado family
  arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
  arm64: add Axiado SoC family
  dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
  dt-bindings: serial: cdns: add Axiado AX3000 UART controller
  dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
  dt-bindings: gpio: cdns: convert to YAML
  dt-bindings: arm: axiado: add AX3000 EVK compatible strings
  dt-bindings: vendor-prefixes: Add Axiado Corporation

6 files changed, 609 insertions, 0 deletions

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 4dfbc65bb81f..66c32edaaf75 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -40,6 +40,12 @@ config ARCH_APPLE
 	  This enables support for Apple's in-house ARM SoC family, such
 	  as the Apple M1.
 
+config ARCH_AXIADO
+	bool "Axiado SoC Family"
+	select GPIOLIB
+	help
+	  This enables support for Axiado SoC family like AX3000
+
 menuconfig ARCH_BCM
 	bool "Broadcom SoC Support"
 
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 8e7ccd0027bd..336866fb154c 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -9,6 +9,7 @@ subdir-y += amlogic
 subdir-y += apm
 subdir-y += apple
 subdir-y += arm
+subdir-y += axiado
 subdir-y += bitmain
 subdir-y += blaize
 subdir-y += broadcom
diff --git a/arch/arm64/boot/dts/axiado/Makefile b/arch/arm64/boot/dts/axiado/Makefile
new file mode 100644
index 000000000000..6676ad07db61
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXIADO) += ax3000-evk.dtb
diff --git a/arch/arm64/boot/dts/axiado/ax3000-evk.dts b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
new file mode 100644
index 000000000000..92101c5b534b
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ax3000.dtsi"
+
+/ {
+	model = "Axiado AX3000 EVK";
+	compatible = "axiado,ax3000-evk", "axiado,ax3000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* Cortex-A53 will use following memory map */
+		reg = <0x00000000 0x3d000000 0x00000000 0x23000000>,
+		      <0x00000004 0x00000000 0x00000000 0x80000000>;
+	};
+};
+
+/* GPIO bank 0 - 7 */
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&gpio6 {
+	status = "okay";
+};
+
+&gpio7 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/axiado/ax3000.dtsi b/arch/arm64/boot/dts/axiado/ax3000.dtsi
new file mode 100644
index 000000000000..792f52e0c7dd
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000.dtsi
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x3c0013a0 0x00000008;	/* cpu-release-addr */
+/ {
+	model = "Axiado AX3000";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x3c0013a0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-unified;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		clk_xin: clock-200000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+			clock-output-names = "clk_xin";
+		};
+
+		refclk: clock-125000000 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic500>;
+
+		gic500: interrupt-controller@80300000 {
+			compatible = "arm,gic-v3";
+			reg = <0x00 0x80300000 0x00 0x10000>,
+			      <0x00 0x80380000 0x00 0x80000>;
+			ranges;
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* GPIO Controller banks 0 - 7 */
+		gpio0: gpio-controller@80500000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80500000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller@80580000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80580000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio2: gpio-controller@80600000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80600000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio3: gpio-controller@80680000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80680000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio4: gpio-controller@80700000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80700000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio5: gpio-controller@80780000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80780000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio6: gpio-controller@80800000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80800000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		gpio7: gpio-controller@80880000 {
+			compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+			reg = <0x00 0x80880000 0x00 0x400>;
+			clocks = <&refclk>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			status = "disabled";
+		};
+
+		/* I3C Controller 0 - 16 */
+		i3c0: i3c@80500400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@80500800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80500800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c2: i3c@80580400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c3: i3c@80580800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80580800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c4: i3c@80600400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c5: i3c@80600800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80600800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c6: i3c@80680400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c7: i3c@80680800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80680800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c8: i3c@80700400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c9: i3c@80700800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80700800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c10: i3c@80780400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c11: i3c@80780800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80780800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c12: i3c@80800400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c13: i3c@80800800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80800800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c14: i3c@80880400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c15: i3c@80880800 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80880800 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i3c16: i3c@80620400 {
+			compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+			reg = <0x00 0x80620400 0x00 0x400>;
+			clocks = <&refclk &clk_xin>;
+			clock-names = "pclk", "sysclk";
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-scl-hz = <100000>;
+			i3c-scl-hz = <400000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@80520000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart1: serial@805a0000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x805A0000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart2: serial@80620000 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80620000 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+
+		uart3: serial@80520800 {
+			compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+			reg = <0x00 0x80520800 0x00 0x100>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "uart_clk", "pclk";
+			clocks = <&refclk &refclk>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			   <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 181c5f91b032..7f22186480dc 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -38,6 +38,7 @@ CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_APPLE=y
+CONFIG_ARCH_AXIADO=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_ARCH_BCM_IPROC=y