diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2026-01-26 16:05:01 +0100 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2026-01-26 16:05:01 +0100 |
| commit | 43b1d60361a5acbb70c40d89e4380de1c4217c95 (patch) | |
| tree | 87f131dcbe264b85595fa848253edb093cbd3731 | |
| parent | 2aced0be57814f45f0853f8ba6bc9c848f8cb3c6 (diff) | |
| parent | fc12767c19d49663b13ba2def6e4674df041c8a2 (diff) | |
Merge tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
104 files changed, 17966 insertions, 463 deletions
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index d84bd3bca201..d48c625d3fc4 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -63,6 +63,11 @@ properties: - items: - enum: + - fairphone,fp6 + - const: qcom,milos + + - items: + - enum: - microsoft,dempsey - microsoft,makepeace - microsoft,moneypenny @@ -327,6 +332,12 @@ properties: - qcom,ipq9574-ap-al02-c9 - const: qcom,ipq9574 + - items: + - enum: + - qcom,kaanapali-mtp + - qcom,kaanapali-qrd + - const: qcom,kaanapali + - description: Sierra Wireless MangOH Green with WP8548 Module items: - const: swir,mangoh-green-wp8548 @@ -336,6 +347,7 @@ properties: - description: Qualcomm Technologies, Inc. Robotics RB1 items: - enum: + - arduino,imola - qcom,qrb2210-rb1 - const: qcom,qrb2210 - const: qcom,qcm2290 @@ -348,6 +360,7 @@ properties: - qcom,qcs6490-rb3gen2 - radxa,dragon-q6a - shift,otter + - thundercomm,rubikpi3 - const: qcom,qcm6490 - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform @@ -900,6 +913,8 @@ properties: - items: - enum: + - google,blueline + - google,crosshatch - huawei,planck - lenovo,yoga-c630 - lg,judyln @@ -1069,6 +1084,19 @@ properties: - items: - enum: + - medion,sprchrgd14s1 + - tuxedo,elite14gen1 + - const: qcom,x1e78100 + - const: qcom,x1e80100 + + - items: + - const: microsoft,denali-lcd + - const: microsoft,denali + - const: qcom,x1p64100 + - const: qcom,x1e80100 + + - items: + - enum: - asus,vivobook-s15 - asus,zenbook-a14-ux3407ra - dell,inspiron-14-plus-7441 @@ -1090,6 +1118,11 @@ properties: - const: qcom,x1e80100 - items: + - const: microsoft,denali-oled + - const: microsoft,denali + - const: qcom,x1e80100 + + - items: - enum: - asus,zenbook-a14-ux3407qa-lcd - asus,zenbook-a14-ux3407qa-oled diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml index 1b15b5070954..881a5dd8d06f 100644 --- a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml @@ -62,6 +62,9 @@ properties: - description: USB4_1 PHY max PIPE clock source - description: USB4_2 PHY PCIE PIPE clock source - description: USB4_2 PHY max PIPE clock source + - description: UFS PHY RX Symbol 0 clock source + - description: UFS PHY RX Symbol 1 clock source + - description: UFS PHY TX Symbol 0 clock source power-domains: description: @@ -121,7 +124,10 @@ examples: <&usb4_1_phy_pcie_pipe_clk>, <&usb4_1_phy_max_pipe_clk>, <&usb4_2_phy_pcie_pipe_clk>, - <&usb4_2_phy_max_pipe_clk>; + <&usb4_2_phy_max_pipe_clk>, + <&ufs_phy_rx_symbol_0>, + <&ufs_phy_rx_symbol_1>, + <&ufs_phy_tx_symbol_0>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml index 9122c3d2dc30..90bfde66cc4a 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml @@ -19,6 +19,8 @@ properties: - items: - enum: - qcom,glymur-cpucp-mbox + - qcom,kaanapali-cpucp-mbox + - qcom,sm8750-cpucp-mbox - const: qcom,x1e80100-cpucp-mbox - enum: - qcom,x1e80100-cpucp-mbox diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml index e5c423130db6..7c4d6170491d 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -24,6 +24,8 @@ properties: compatible: items: - enum: + - qcom,glymur-ipcc + - qcom,kaanapali-ipcc - qcom,milos-ipcc - qcom,qcs8300-ipcc - qcom,qdu1000-ipcc diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index c7591b2aec2a..2de0af95f5e6 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -158,6 +158,8 @@ patternProperties: description: Arctic Sand "^arcx,.*": description: arcx Inc. / Archronix Inc. + "^arduino,.*": + description: Arduino SRL "^argon40,.*": description: Argon 40 Technologies Limited "^ariaboard,.*": @@ -995,6 +997,8 @@ patternProperties: description: Mustek Limited "^mediatek,.*": description: MediaTek Inc. + "^medion,.*": + description: Medion AG "^megachips,.*": description: MegaChips "^mele,.*": @@ -1697,6 +1701,8 @@ patternProperties: description: Theobroma Systems Design und Consulting GmbH "^turing,.*": description: Turing Machines, Inc. + "^tuxedo,.*": + description: TUXEDO Computers GmbH "^tyan,.*": description: Tyan Computer Corporation "^tyhx,.*": diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6f34d5ed331c..f80b5d9cf1e8 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -30,6 +30,8 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp449.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp453.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb +dtb-$(CONFIG_ARCH_QCOM) += kaanapali-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += kaanapali-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb lemans-evk-camera-csi1-imx577-dtbs := lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo @@ -37,6 +39,11 @@ lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera-csi1-imx577.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb + +lemans-evk-el2-dtbs := lemans-evk.dtb lemans-el2.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-el2.dtb +dtb-$(CONFIG_ARCH_QCOM) += milos-fairphone-fp6.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb @@ -138,12 +145,25 @@ qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2 dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-industrial-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-thundercomm-rubikpi3.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb + +qcs9100-ride-el2-dtbs := qcs9100-ride.dtb lemans-el2.dtbo +qcs9100-ride-r3-el2-dtbs := qcs9100-ride-r3.dtb lemans-el2.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-el2.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-arduino-imola.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb + +qrb2210-rb1-vision-mezzanine-dtbs := qrb2210-rb1.dtb qrb2210-rb1-vision-mezzanine.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1-vision-mezzanine.dtb + dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb @@ -250,6 +270,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine-dtbs := sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c-navigation-mezzanine.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-google-crosshatch.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-google-blueline.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb @@ -315,8 +337,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8550-samsung-q5q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb sm8650-hdk-display-card-dtbs := sm8650-hdk.dtb sm8650-hdk-display-card.dtbo +sm8650-hdk-display-card-rear-camera-card-dtbs := sm8650-hdk.dtb sm8650-hdk-display-card.dtbo sm8650-hdk-rear-camera-card.dtbo +sm8650-hdk-rear-camera-card-dtbs := sm8650-hdk.dtb sm8650-hdk-rear-camera-card.dtbo +dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card-rear-camera-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-display-card.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk-rear-camera-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb @@ -346,6 +372,8 @@ x1e80100-hp-omnibook-x14-el2-dtbs := x1e80100-hp-omnibook-x14.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-hp-omnibook-x14.dtb x1e80100-hp-omnibook-x14-el2.dtb x1e80100-lenovo-yoga-slim7x-el2-dtbs := x1e80100-lenovo-yoga-slim7x.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-lenovo-yoga-slim7x.dtb x1e80100-lenovo-yoga-slim7x-el2.dtb +x1e80100-medion-sprchrgd-14-s1-el2-dtbs := x1e80100-medion-sprchrgd-14-s1.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-medion-sprchrgd-14-s1.dtb x1e80100-medion-sprchrgd-14-s1-el2.dtb x1e80100-microsoft-romulus13-el2-dtbs := x1e80100-microsoft-romulus13.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-microsoft-romulus13.dtb x1e80100-microsoft-romulus13-el2.dtb x1e80100-microsoft-romulus15-el2-dtbs := x1e80100-microsoft-romulus15.dtb x1-el2.dtbo @@ -362,3 +390,5 @@ x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb x1p42100-lenovo-thinkbook-16-el2-dtbs := x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb +x1p64100-microsoft-denali-el2-dtbs := x1p64100-microsoft-denali.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p64100-microsoft-denali.dtb x1p64100-microsoft-denali-el2.dtb diff --git a/arch/arm64/boot/dts/qcom/agatti.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi index 8bf5c5583fc2..7815ece261ea 100644 --- a/arch/arm64/boot/dts/qcom/agatti.dtsi +++ b/arch/arm64/boot/dts/qcom/agatti.dtsi @@ -562,6 +562,13 @@ bias-disable; }; + qup_uart2_default: qup-uart2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + qup_uart3_default: qup-uart3-default-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "qup3"; @@ -597,6 +604,34 @@ bias-disable; }; + mclk0_default: mclk0-default-state { + pins = "gpio20"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + mclk1_default: mclk1-default-state { + pins = "gpio21"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + mclk2_default: mclk2-default-state { + pins = "gpio27"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + + mclk3_default: mclk3-default-state { + pins = "gpio28"; + function = "cam_mclk"; + drive-strength = <16>; + bias-disable; + }; + sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; @@ -1315,6 +1350,23 @@ status = "disabled"; }; + uart2: serial@4a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart2_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c3: i2c@4a8c000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a8c000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/qcom/glymur-ipcc.h b/arch/arm64/boot/dts/qcom/glymur-ipcc.h new file mode 100644 index 000000000000..700cd7114909 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/glymur-ipcc.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef __DTS_GLYMUR_MAILBOX_IPCC_H +#define __DTS_GLYMUR_MAILBOX_IPCC_H + +/* Glymur physical client IDs */ +#define IPCC_MPROC_AOP 0 +#define IPCC_MPROC_TZ 1 +#define IPCC_MPROC_MPSS 2 +#define IPCC_MPROC_LPASS 3 +#define IPCC_MPROC_SLPI 4 +#define IPCC_MPROC_SDC 5 +#define IPCC_MPROC_CDSP 6 +#define IPCC_MPROC_NPU 7 +#define IPCC_MPROC_APSS 8 +#define IPCC_MPROC_GPU 9 +#define IPCC_MPROC_ICP 11 +#define IPCC_MPROC_VPU 12 +#define IPCC_MPROC_PCIE0 13 +#define IPCC_MPROC_PCIE1 14 +#define IPCC_MPROC_PCIE2 15 +#define IPCC_MPROC_SPSS 16 +#define IPCC_MPROC_PCIE3 19 +#define IPCC_MPROC_PCIE4 20 +#define IPCC_MPROC_PCIE5 21 +#define IPCC_MPROC_PCIE6 22 +#define IPCC_MPROC_TME 23 +#define IPCC_MPROC_WPSS 24 +#define IPCC_MPROC_PCIE7 44 +#define IPCC_MPROC_SOCCP 46 + +#define IPCC_COMPUTE_L0_LPASS 0 +#define IPCC_COMPUTE_L0_CDSP 1 +#define IPCC_COMPUTE_L0_APSS 2 +#define IPCC_COMPUTE_L0_GPU 3 +#define IPCC_COMPUTE_L0_CVP 6 +#define IPCC_COMPUTE_L0_ICP 7 +#define IPCC_COMPUTE_L0_VPU 8 +#define IPCC_COMPUTE_L0_DPU 9 +#define IPCC_COMPUTE_L0_SOCCP 11 + +#define IPCC_COMPUTE_L1_LPASS 0 +#define IPCC_COMPUTE_L1_CDSP 1 +#define IPCC_COMPUTE_L1_APSS 2 +#define IPCC_COMPUTE_L1_GPU 3 +#define IPCC_COMPUTE_L1_CVP 6 +#define IPCC_COMPUTE_L1_ICP 7 +#define IPCC_COMPUTE_L1_VPU 8 +#define IPCC_COMPUTE_L1_DPU 9 +#define IPCC_COMPUTE_L1_SOCCP 11 + +#define IPCC_PERIPH_LPASS 0 +#define IPCC_PERIPH_APSS 1 +#define IPCC_PERIPH_PCIE0 2 +#define IPCC_PERIPH_PCIE1 3 +#define IPCC_PERIPH_PCIE2 6 +#define IPCC_PERIPH_PCIE3 7 +#define IPCC_PERIPH_PCIE4 8 +#define IPCC_PERIPH_PCIE5 9 +#define IPCC_PERIPH_PCIE6 10 +#define IPCC_PERIPH_PCIE7 11 +#define IPCC_PERIPH_SOCCP 13 +#define IPCC_PERIPH_WPSS 16 + +#endif diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts index 36dd6599402b..2390648a248f 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -5,7 +5,9 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "hamoa-iot-som.dtsi" +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm Technologies, Inc. Hamoa IoT EVK"; @@ -17,6 +19,16 @@ serial1 = &uart14; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmk8550_pwm 0 5000000>; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + pinctrl-names = "default"; + }; + wcd938x: audio-codec { compatible = "qcom,wcd9385-codec"; @@ -48,6 +60,32 @@ stdout-path = "serial0:115200n8"; }; + connector3 { + compatible = "usb-a-connector"; + label = "USB-3-Type-A"; + power-role = "source"; + + vbus-supply = <®ulator_usb3_vbus>; + + port { + connector_3_in: endpoint { + }; + }; + }; + + connector6 { + compatible = "usb-a-connector"; + label = "USB-6-Type-A"; + power-role = "source"; + + vbus-supply = <®ulator_usb6_vbus>; + + port { + connector_4_in: endpoint { + }; + }; + }; + pmic-glink { compatible = "qcom,x1e80100-pmic-glink", "qcom,sm8550-pmic-glink", @@ -183,6 +221,22 @@ regulator-boot-on; }; + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VBL9"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_bl_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; @@ -199,6 +253,48 @@ regulator-boot-on; }; + vreg_pcie_12v: regulator-pcie-12v { + compatible = "regulator-fixed"; + + regulator-name = "VREG_PCIE_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + + gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&pcie_x8_12v>; + pinctrl-names = "default"; + }; + + vreg_pcie_3v3: regulator-pcie-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_PCIE_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&pm_sde7_main_3p3_en>; + pinctrl-names = "default"; + }; + + vreg_pcie_3v3_aux: regulator-pcie-3v3-aux { + compatible = "regulator-fixed"; + + regulator-name = "VREG_PCIE_3P3_AUX"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&pm_sde7_aux_3p3_en>; + pinctrl-names = "default"; + }; + /* Left unused as the retimer is not used on this board. */ vreg_rtmr0_1p15: regulator-rtmr0-1p15 { compatible = "regulator-fixed"; @@ -344,6 +440,26 @@ regulator-boot-on; }; + regulator_usb3_vbus: regulator-usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB3_VBUS"; + gpio = <&pm8550ve_9_gpios 4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb3_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + + regulator_usb6_vbus: regulator-usb6-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB6_VBUS"; + gpio = <&pm8550ve_9_gpios 5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb6_en>; + pinctrl-names = "default"; + enable-active-high; + regulator-always-on; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -534,7 +650,7 @@ bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&wcn_bt_en>; + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; pinctrl-names = "default"; regulators { @@ -819,6 +935,8 @@ aux-bus { panel { compatible = "edp-panel"; + + backlight = <&backlight>; power-supply = <&vreg_edp_3p3>; port { @@ -844,10 +962,53 @@ status = "okay"; }; +&pcie3_port0 { + vpcie12v-supply = <&vreg_pcie_12v>; + vpcie3v3-supply = <&vreg_pcie_3v3>; + vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>; + + reset-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; +}; + +&pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie5 { + vddpe-3v3-supply = <&vreg_wwan>; +}; + +&pcie5_port0 { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; +}; + &pcie6a { vddpe-3v3-supply = <&vreg_nvme>; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + &pm8550_gpios { rtmr0_default: rtmr0-reset-n-active-state { pins = "gpio10"; @@ -868,6 +1029,17 @@ }; }; +&pm8550ve_8_gpios { + pcie_x8_12v: pcie-12v-default-state { + pins = "gpio8"; + function = "normal"; + output-enable; + output-high; + bias-pull-down; + power-source = <0>; + }; +}; + &pm8550ve_9_gpios { usb0_1p8_reg_en: usb0-1p8-reg-en-state { pins = "gpio8"; @@ -877,6 +1049,77 @@ input-disable; output-enable; }; + + usb3_en: usb3-en-state { + pins = "gpio4"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; + + usb6_en: usb6-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + output-enable; + power-source = <0>; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_MULTI>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; + input-disable; + output-enable; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio10"; + function = "normal"; + }; +}; + +&pmc8380_3_gpios { + pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state { + pins = "gpio8"; + function = "normal"; + output-enable; + bias-pull-down; + power-source = <0>; + }; + + pm_sde7_main_3p3_en: pcie-main-3p3-default-state { + pins = "gpio6"; + function = "normal"; + output-enable; + bias-pull-down; + power-source = <0>; + }; }; &pmc8380_5_gpios { @@ -890,6 +1133,17 @@ }; }; +&pmk8550_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio5"; + function = "func3"; + }; +}; + +&pmk8550_pwm { + status = "okay"; +}; + &smb2360_0 { status = "okay"; }; @@ -917,6 +1171,16 @@ vdd3-supply = <&vreg_l8b_3p0>; }; +&spi11 { + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + &swr0 { status = "okay"; @@ -1143,6 +1407,13 @@ bias-disable; }; + wcn_wlan_en: wcn-wlan-en-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wwan_sw_en: wwan-sw-en-state { pins = "gpio221"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi index 4a69852e9176..b8e3e04a6fbd 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi @@ -390,10 +390,21 @@ firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; }; -&pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; +&pcie3 { + pinctrl-0 = <&pcie3_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l3c_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&pcie4 { pinctrl-0 = <&pcie4_default>; pinctrl-names = "default"; @@ -407,10 +418,21 @@ status = "okay"; }; -&pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +&pcie5 { + pinctrl-0 = <&pcie5_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie5_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; +}; + +&pcie6a { pinctrl-0 = <&pcie6a_default>; pinctrl-names = "default"; @@ -453,6 +475,29 @@ &tlmm { gpio-reserved-ranges = <34 2>; /* TPM LP & INT */ + pcie3_default: pcie3-default-state { + clkreq-n-pins { + pins = "gpio144"; + function = "pcie3_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie4_default: pcie4-default-state { clkreq-n-pins { pins = "gpio147"; @@ -476,6 +521,29 @@ }; }; + pcie5_default: pcie5-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie5_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio149"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + pcie6a_default: pcie6a-default-state { clkreq-n-pins { pins = "gpio153"; diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi index a17900eacb20..01434f8a5300 100644 --- a/arch/arm64/boot/dts/qcom/hamoa.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi @@ -791,8 +791,8 @@ #address-cells = <2>; #size-cells = <2>; - dma-ranges = <0 0 0 0 0x10 0>; - ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x100 0>; + ranges = <0 0 0 0 0x100 0>; gcc: clock-controller@100000 { compatible = "qcom,x1e80100-gcc"; @@ -834,6 +834,9 @@ <0>, <0>, <0>, + <0>, + <0>, + <0>, <0>; power-domains = <&rpmhpd RPMHPD_CX>; @@ -2937,7 +2940,7 @@ reg = <0 0x00fda000 0 0x4000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, + <&tcsr TCSR_USB4_1_CLKREF_EN>, <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "aux", @@ -3008,7 +3011,7 @@ reg = <0 0x00fdf000 0 0x4000>; clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, + <&tcsr TCSR_USB4_2_CLKREF_EN>, <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>, <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>; clock-names = "aux", @@ -3060,6 +3063,11 @@ }; }; + rng: rng@10c3000 { + compatible = "qcom,x1e80100-trng", "qcom,trng"; + reg = <0x0 0x010c3000 0x0 0x1000>; + }; + cnoc_main: interconnect@1500000 { compatible = "qcom,x1e80100-cnoc-main"; reg = <0 0x01500000 0 0x14400>; @@ -3161,7 +3169,7 @@ mmss_noc: interconnect@1780000 { compatible = "qcom,x1e80100-mmss-noc"; - reg = <0 0x01780000 0 0x5B800>; + reg = <0 0x01780000 0 0x5b800>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -3253,9 +3261,6 @@ power-domains = <&gcc GCC_PCIE_3_GDSC>; - phys = <&pcie3_phy>; - phy-names = "pciephy"; - eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555 0x5555 0x5555 0x5555 0x5555>; eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55 0x55 0x55 0x55 0x55>; @@ -3396,12 +3401,14 @@ }; }; - pcie3_port: pcie@0 { + pcie3_port0: pcie@0 { device_type = "pci"; compatible = "pciclass,0604"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; + phys = <&pcie3_phy>; + #address-cells = <3>; #size-cells = <2>; ranges; @@ -3530,13 +3537,22 @@ power-domains = <&gcc GCC_PCIE_6A_GDSC>; required-opps = <&rpmhpd_opp_nom>; - phys = <&pcie6a_phy>; - phy-names = "pciephy"; - eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; status = "disabled"; + + pcie6a_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie6a_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie6a_phy: phy@1bfc000 { @@ -3662,12 +3678,21 @@ power-domains = <&gcc GCC_PCIE_5_GDSC>; required-opps = <&rpmhpd_opp_nom>; - phys = <&pcie5_phy>; - phy-names = "pciephy"; - eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; status = "disabled"; + + pcie5_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + phys = <&pcie5_phy>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie5_phy: phy@1c06000 { @@ -3792,9 +3817,6 @@ power-domains = <&gcc GCC_PCIE_4_GDSC>; required-opps = <&rpmhpd_opp_nom>; - phys = <&pcie4_phy>; - phy-names = "pciephy"; - eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; status = "disabled"; @@ -3804,6 +3826,8 @@ reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; + phys = <&pcie4_phy>; + #address-cells = <3>; #size-cells = <2>; ranges; @@ -3845,6 +3869,32 @@ status = "disabled"; }; + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <20>; + qcom,num-ees = <4>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,x1e80100-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", + "tx"; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; @@ -4136,7 +4186,7 @@ nsp_noc: interconnect@320c0000 { compatible = "qcom,x1e80100-nsp-noc"; - reg = <0 0x320C0000 0 0xe080>; + reg = <0 0x320c0000 0 0xe080>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -4647,7 +4697,7 @@ lpass_lpicx_noc: interconnect@7430000 { compatible = "qcom,x1e80100-lpass-lpicx-noc"; - reg = <0 0x07430000 0 0x3A200>; + reg = <0 0x07430000 0 0x3a200>; qcom,bcm-voters = <&apps_bcm_voter>; @@ -5579,6 +5629,7 @@ phy-names = "dp"; #sound-dai-cells = <0>; + sound-name-prefix = "DisplayPort0"; status = "disabled"; @@ -5667,6 +5718,7 @@ phy-names = "dp"; #sound-dai-cells = <0>; + sound-name-prefix = "DisplayPort1"; status = "disabled"; @@ -5755,6 +5807,7 @@ phy-names = "dp"; #sound-dai-cells = <0>; + sound-name-prefix = "DisplayPort2"; status = "disabled"; @@ -5838,6 +5891,7 @@ phy-names = "dp"; #sound-dai-cells = <0>; + sound-name-prefix = "DisplayPort3"; status = "disabled"; @@ -5896,9 +5950,11 @@ <0 0x0aec2000 0 0x1c8>; clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>; + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&tcsr TCSR_EDP_CLKREF_EN>; clock-names = "aux", - "cfg_ahb"; + "cfg_ahb", + "ref"; power-domains = <&rpmhpd RPMHPD_MX>; @@ -5916,9 +5972,11 @@ <0 0x0aec5000 0 0x1c8>; clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>; + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&tcsr TCSR_EDP_CLKREF_EN>; clock-names = "aux", - "cfg_ahb"; + "cfg_ahb", + "ref"; power-domains = <&rpmhpd RPMHPD_MX>; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index f024b3cba33f..6f8004a22a1f 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -340,7 +340,7 @@ }; tsens: thermal-sensor@4a9000 { - compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1"; + compatible = "qcom,ipq5018-tsens"; reg = <0x004a9000 0x1000>, <0x004a8000 0x1000>; @@ -571,8 +571,12 @@ compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; reg = <0x08af8800 0x400>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq"; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; clocks = <&gcc GCC_USB0_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 86c9cb9fffc9..d7278f2137ac 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -765,8 +765,14 @@ assigned-clock-rates = <200000000>, <24000000>; - interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event"; + interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "qusb2_phy", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; resets = <&gcc GCC_USB_BCR>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/kaanapali-ipcc.h b/arch/arm64/boot/dts/qcom/kaanapali-ipcc.h new file mode 100644 index 000000000000..125375a4aac0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/kaanapali-ipcc.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#ifndef __DTS_KAANAPALI_MAILBOX_IPCC_H +#define __DTS_KAANAPALI_MAILBOX_IPCC_H + +/* Physical client IDs */ +#define IPCC_MPROC_AOP 0 +#define IPCC_MPROC_TZ 1 +#define IPCC_MPROC_MPSS 2 +#define IPCC_MPROC_LPASS 3 +#define IPCC_MPROC_SDC 4 +#define IPCC_MPROC_CDSP 5 +#define IPCC_MPROC_APSS 6 +#define IPCC_MPROC_SOCCP 13 +#define IPCC_MPROC_DCP 14 +#define IPCC_MPROC_SPSS 15 +#define IPCC_MPROC_TME 16 +#define IPCC_MPROC_WPSS 17 + +#define IPCC_COMPUTE_L0_CDSP 2 +#define IPCC_COMPUTE_L0_APSS 3 +#define IPCC_COMPUTE_L0_GPU 4 +#define IPCC_COMPUTE_L0_CVP 8 +#define IPCC_COMPUTE_L0_CAM 9 +#define IPCC_COMPUTE_L0_CAM1 10 +#define IPCC_COMPUTE_L0_DCP 11 +#define IPCC_COMPUTE_L0_VPU 12 +#define IPCC_COMPUTE_L0_SOCCP 16 + +#define IPCC_COMPUTE_L1_CDSP 2 +#define IPCC_COMPUTE_L1_APSS 3 +#define IPCC_COMPUTE_L1_GPU 4 +#define IPCC_COMPUTE_L1_CVP 8 +#define IPCC_COMPUTE_L1_CAM 9 +#define IPCC_COMPUTE_L1_CAM1 10 +#define IPCC_COMPUTE_L1_DCP 11 +#define IPCC_COMPUTE_L1_VPU 12 +#define IPCC_COMPUTE_L1_SOCCP 16 + +#define IPCC_PERIPH_CDSP 2 +#define IPCC_PERIPH_APSS 3 +#define IPCC_PERIPH_PCIE0 4 +#define IPCC_PERIPH_PCIE1 5 + +#define IPCC_FENCE_CDSP 2 +#define IPCC_FENCE_APSS 3 +#define IPCC_FENCE_GPU 4 +#define IPCC_FENCE_CVP 8 +#define IPCC_FENCE_CAM 8 +#define IPCC_FENCE_CAM1 10 +#define IPCC_FENCE_DCP 11 +#define IPCC_FENCE_VPU 20 +#define IPCC_FENCE_SOCCP 24 + +#endif diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts new file mode 100644 index 000000000000..32a082598434 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts @@ -0,0 +1,754 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "kaanapali.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Kaanapali MTP"; + compatible = "qcom,kaanapali-mtp", "qcom,kaanapali"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmh0101-rpmh-regulators"; + qcom,pmic-id = "B_E0"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3552000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3148000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l11b_1p0: ldo11 { + regulator-name = "vreg_l11b_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1292000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p2: ldo18 { + regulator-name = "vreg_l18b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-1 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "D_E0"; + + vreg_s10d_1p0: smps10 { + regulator-name = "vreg_s10d_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1d_1p2: ldo1 { + regulator-name = "vreg_l1d_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <958000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3d_0p8: ldo3 { + regulator-name = "vreg_l3d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4d_1p2: ldo4 { + regulator-name = "vreg_l4d_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-2 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "F_E0"; + + vreg_s6f_0p5: smps6 { + regulator-name = "vreg_s6f_0p5"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7f_1p2: smps7 { + regulator-name = "vreg_s7f_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8f_1p8: smps8 { + regulator-name = "vreg_s8f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p2: ldo1 { + regulator-name = "vreg_l1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2f_1p2: ldo2 { + regulator-name = "vreg_l2f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3f_0p8: ldo3 { + regulator-name = "vreg_l3f_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <936000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4f_0p8: ldo4 { + regulator-name = "vreg_l4f_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-3 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "G_E0"; + + vreg_s7g_0p9: smps7 { + regulator-name = "vreg_s7g_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9g_1p0: smps9 { + regulator-name = "vreg_s9g_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2g_1p8: ldo2 { + regulator-name = "vreg_l2g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4g_0p9: ldo4 { + regulator-name = "vreg_l4g_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-4 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "I_E0"; + + vreg_s7i_0p9: smps7 { + regulator-name = "vreg_s7i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <972000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-5 { + compatible = "qcom,pmh0104-rpmh-regulators"; + qcom,pmic-id = "J_E1"; + + vreg_s1j_0p8: smps1 { + regulator-name = "vreg_s1j_0p8"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2j_0p8: smps2 { + regulator-name = "vreg_s2j_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3j_1p2: smps3 { + regulator-name = "vreg_s3j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4j_0p7: smps4 { + regulator-name = "vreg_s4j_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pmr735d-rpmh-regulators"; + qcom,pmic-id = "K_E1"; + + vreg_l1k_0p8: ldo1 { + regulator-name = "vreg_l1k_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2k_0p7: ldo2 { + regulator-name = "vreg_l2k_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3k_1p2: ldo3 { + regulator-name = "vreg_l3k_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4k_1p0: ldo4 { + regulator-name = "vreg_l4k_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5k_0p7: ldo5 { + regulator-name = "vreg_l5k_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6k_1p7: ldo6 { + regulator-name = "vreg_l6k_1p7"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7k_0p7: ldo7 { + regulator-name = "vreg_l7k_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <848000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "M_E1"; + + vreg_l1m_1p0: ldo1 { + regulator-name = "vreg_l1m_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p0: ldo2 { + regulator-name = "vreg_l2m_1p0"; + regulator-min-microvolt = <1096000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p2: ldo4 { + regulator-name = "vreg_l4m_2p2"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p8: ldo7 { + regulator-name = "vreg_l7m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-8 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "N_E1"; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1096000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p2: ldo2 { + regulator-name = "vreg_l2n_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l1d_1p2>; + + status = "okay"; +}; + +&pcie_port0 { + wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <36 4>, /* NFC eSE SPI */ + <74 1>, /* eSE */ + <119 2>, /* SoCCP */ + <144 4>; /* CXM UART */ + + pcie0_default_state: pcie0-default-state { + perst-n-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + clkreq-n-pins { + pins = "gpio103"; + function = "pcie0_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-n-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 217 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1200000>; + vccq-supply = <&vreg_l4d_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4g_0p9>; + vdda-pll-supply = <&vreg_l1d_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts new file mode 100644 index 000000000000..66b423a497b3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/kaanapali-qrd.dts @@ -0,0 +1,712 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "kaanapali.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Kaanapali QRD"; + compatible = "qcom,kaanapali-qrd", "qcom,kaanapali"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmh0101-rpmh-regulators"; + qcom,pmic-id = "B_E0"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3552000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3148000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l11b_1p0: ldo11 { + regulator-name = "vreg_l11b_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1292000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p2: ldo18 { + regulator-name = "vreg_l18b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-1 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "D_E0"; + + vreg_s10d_1p0: smps10 { + regulator-name = "vreg_s10d_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1d_1p2: ldo1 { + regulator-name = "vreg_l1d_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <958000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3d_0p8: ldo3 { + regulator-name = "vreg_l3d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4d_1p2: ldo4 { + regulator-name = "vreg_l4d_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-2 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "F_E0"; + + vreg_s6f_0p5: smps6 { + regulator-name = "vreg_s6f_0p5"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7f_1p2: smps7 { + regulator-name = "vreg_s7f_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8f_1p8: smps8 { + regulator-name = "vreg_s8f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p2: ldo1 { + regulator-name = "vreg_l1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2f_1p2: ldo2 { + regulator-name = "vreg_l2f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3f_0p8: ldo3 { + regulator-name = "vreg_l3f_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <936000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4f_0p8: ldo4 { + regulator-name = "vreg_l4f_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-3 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "G_E0"; + + vreg_s7g_0p9: smps7 { + regulator-name = "vreg_s7g_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9g_1p0: smps9 { + regulator-name = "vreg_s9g_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l2g_1p8: ldo2 { + regulator-name = "vreg_l2g_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l4g_0p9: ldo4 { + regulator-name = "vreg_l4g_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-4 { + compatible = "qcom,pmh0110-rpmh-regulators"; + qcom,pmic-id = "I_E0"; + + vreg_s7i_0p9: smps7 { + regulator-name = "vreg_s7i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <972000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + regulators-5 { + compatible = "qcom,pmh0104-rpmh-regulators"; + qcom,pmic-id = "J_E1"; + + vreg_s1j_0p8: smps1 { + regulator-name = "vreg_s1j_0p8"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2j_0p8: smps2 { + regulator-name = "vreg_s2j_0p8"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3j_1p2: smps3 { + regulator-name = "vreg_s3j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4j_0p7: smps4 { + regulator-name = "vreg_s4j_0p7"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pmr735d-rpmh-regulators"; + qcom,pmic-id = "K_E1"; + + vreg_l1k_0p8: ldo1 { + regulator-name = "vreg_l1k_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2k_0p7: ldo2 { + regulator-name = "vreg_l2k_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3k_1p2: ldo3 { + regulator-name = "vreg_l3k_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4k_1p0: ldo4 { + regulator-name = "vreg_l4k_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5k_0p7: ldo5 { + regulator-name = "vreg_l5k_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6k_1p7: ldo6 { + regulator-name = "vreg_l6k_1p7"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7k_0p7: ldo7 { + regulator-name = "vreg_l7k_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <848000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "M_E1"; + + vreg_l1m_1p0: ldo1 { + regulator-name = "vreg_l1m_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p0: ldo2 { + regulator-name = "vreg_l2m_1p0"; + regulator-min-microvolt = <1096000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p2: ldo4 { + regulator-name = "vreg_l4m_2p2"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p8: ldo7 { + regulator-name = "vreg_l7m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-8 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "N_E1"; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1096000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p2: ldo2 { + regulator-name = "vreg_l2n_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <36 4>, /* NFC eSE SPI */ + <74 1>, /* eSE */ + <119 2>, /* SoCCP */ + <144 4>; /* CXM UART */ +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 217 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1200000>; + vccq-supply = <&vreg_l4d_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4g_0p9>; + vdda-pll-supply = <&vreg_l1d_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi new file mode 100644 index 000000000000..9ef57ad0ca71 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi @@ -0,0 +1,1606 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/clock/qcom,kaanapali-gcc.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8750-tcsr.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,kaanapali-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +#include "kaanapali-ipcc.h" + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 0>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 0>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 0>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 0>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd4>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 0>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd5>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 0>; + }; + + cpu6: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10000>; + enable-method = "psci"; + next-level-cache = <&l2_1>; + power-domains = <&cpu_pd6>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 1>; + + l2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu7: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10100>; + enable-method = "psci"; + next-level-cache = <&l2_1>; + power-domains = <&cpu_pd7>; + power-domain-names = "psci"; + clocks = <&pdp_scmi_perf 1>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu6>; + }; + + core1 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cluster0_c4: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "retention"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <93>; + exit-latency-us = <129>; + min-residency-us = <560>; + }; + + cluster1_c4: cpu-sleep-1 { + compatible = "arm,idle-state"; + idle-state-name = "retention"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <172>; + exit-latency-us = <130>; + min-residency-us = <686>; + }; + }; + + domain-idle-states { + cluster_cl5: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x01000054>; + entry-latency-us = <2150>; + exit-latency-us = <1983>; + min-residency-us = <9144>; + }; + + domain_ss3: domain-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x0200c354>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-kaanapali", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x19000>; + interconnects = <&aggre_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + }; + + scmi: scmi { + compatible = "arm,scmi"; + mboxes = <&pdp0_mbox 0>, <&pdp0_mbox 1>; + mbox-names = "tx", "rx"; + shmem = <&pdp_tx>, <&pdp_rx>; + + #address-cells = <1>; + #size-cells = <0>; + + pdp_scmi_perf: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + }; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,kaanapali-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,kaanapali-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0xa0000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster0_c4>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster1_c4>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cluster1_c4>; + }; + + cluster_pd: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_cl5>; + power-domains = <&system_pd>; + }; + + system_pd: power-domain-system { + #power-domain-cells = <0>; + domain-idle-states = <&domain_ss3>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + pdp_mem: pdp@81300000 { + reg = <0x0 0x81300000 0x0 0x100000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + smem_mem: smem@81d00000 { + compatible = "qcom,smem"; + reg = <0x0 0x81d00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + pdp_ns_shared_mem: pdp-ns-shared@81f00000 { + reg = <0x0 0x81f00000 0x0 0x100000>; + no-map; + }; + + dsm_partition_1_mem: dsm-partition-1@84a00000 { + reg = <0x0 0x84a00000 0x0 0x5500000>; + no-map; + }; + + dsm_partition_2_mem: dsm-partition-2@89f00000 { + reg = <0x0 0x89f00000 0x0 0xa80000>; + no-map; + }; + + mpss_mem: mpss@8aa00000 { + reg = <0x0 0x8aa00000 0x0 0xeb00000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@99500000 { + reg = <0x0 0x99500000 0x0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@99580000 { + reg = <0x0 0x99580000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@99590000 { + reg = <0x0 0x99590000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@9959a000 { + reg = <0x0 0x9959a000 0x0 0x2000>; + no-map; + }; + + camera_mem: camera@99600000 { + reg = <0x0 0x99600000 0x0 0x800000>; + no-map; + }; + + camera_2_mem: camera-2@99e00000 { + reg = <0x0 0x99e00000 0x0 0x800000>; + no-map; + }; + + video_mem: video@9a600000 { + reg = <0x0 0x9a600000 0x0 0x800000>; + no-map; + }; + + cvp_mem: cvp@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp@9b500000 { + reg = <0x0 0x9b500000 0x0 0x1900000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@9ce00000 { + reg = <0x0 0x9ce00000 0x0 0x80000>; + no-map; + }; + + soccp_mem: soccp@a03d0000 { + reg = <0x0 0xa03d0000 0x0 0x500000>; + no-map; + }; + + soccp_dtb_mem: soccp-dtb@a08d0000 { + reg = <0x0 0xa08d0000 0x0 0x40000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@a1380000 { + reg = <0x0 0xa1380000 0x0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi@a1400000 { + reg = <0x0 0xa1400000 0x0 0x4c00000>; + no-map; + }; + + rmtfs_mem: rmtfs@d7c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xd7c00000 0x0 0x400000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; + ranges = <0x0 0x0 0x0 0x0 0x10 0x0>; + + gcc: clock-controller@100000 { + compatible = "qcom,kaanapali-gcc"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>, + <&pcie0_phy>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <0>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qupv3_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AXI_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0xa3 0x0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart7: serial@a9c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a9c000 0x0 0x4000>; + + interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart7_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + ipcc: mailbox@1106000 { + compatible = "qcom,kaanapali-ipcc", "qcom,ipcc"; + reg = <0x0 0x01106000 0x0 0x1000>; + + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,kaanapali-cnoc-main"; + reg = <0x0 0x01500000 0x0 0x1a080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,kaanapali-cnoc-cfg"; + reg = <0x0 0x01600000 0x0 0x6200>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,kaanapali-system-noc"; + reg = <0x0 0x01680000 0x0 0x1f080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,kaanapali-pcie-anoc"; + reg = <0x0 0x016c0000 0x0 0x11400>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + }; + + aggre_noc: interconnect@16e0000 { + compatible = "qcom,kaanapali-aggre-noc"; + reg = <0x0 0x016e0000 0x0 0x42400>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,kaanapali-mmss-noc"; + reg = <0x0 0x01780000 0x0 0x5b800>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + pcie0: pcie@1c00000 { + device_type = "pci"; + compatible = "qcom,kaanapali-pcie", "qcom,pcie-sm8550"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1d>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x23d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + resets = <&gcc GCC_PCIE_0_BCR>, + <&gcc GCC_PCIE_0_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc GCC_PCIE_0_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; + + operating-points-v2 = <&pcie0_opp_table>; + + iommu-map = <0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + msi-map = <0x0 &gic_its 0x1400 0x1>, + <0x100 &gic_its 0x1401 0x1>; + msi-map-mask = <0xff00>; + max-link-speed = <3>; + linux,pci-domain = <0>; + num-lanes = <2>; + bus-range = <0x00 0xff>; + + dma-coherent; + + status = "disabled"; + + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1 x2 and GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 2 x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3 x2 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + }; + + pcie_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie0_phy>; + }; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,kaanapali-qmp-gen3x2-pcie-phy"; + reg = <0x0 0x01c06000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>, + <&gcc GCC_PCIE_0_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + power-domains = <&gcc GCC_PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,kaanapali-qmp-ufs-phy", "qcom,sm8750-qmp-ufs-phy"; + reg = <0x0 0x01d80000 0x0 0x2000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&tcsr TCSR_UFS_CLKREF_EN>; + + clock-names = "ref", + "ref_aux", + "qref"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc GCC_UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,kaanapali-ufshc", + "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_LN_BB_CLK3>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + operating-points-v2 = <&ufs_opp_table>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0x0>; + dma-coherent; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-403000000 { + opp-hz = /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <403000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + ice: crypto@1d88000 { + compatible = "qcom,kaanapali-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x0 0x01d88000 0x0 0x18000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,kaanapali-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0x30000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,kaanapali-lpass-lpiaon-noc"; + reg = <0x0 0x07400000 0x0 0x19080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + lpass_lpicx_noc: interconnect@7420000 { + compatible = "qcom,kaanapali-lpass-lpicx-noc"; + reg = <0x0 0x07420000 0x0 0x44080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + lpass_ag_noc: interconnect@7f40000 { + compatible = "qcom,kaanapali-lpass-ag-noc"; + reg = <0x0 0x07f40000 0x0 0xe080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,kaanapali-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + + interconnects = <&aggre_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + qcom,dll-config = <0x0007442c>; + qcom,ddr-config = <0x80040868>; + + iommus = <&apps_smmu 0x540 0x0>; + dma-coherent; + + resets = <&gcc GCC_SDCC2_BCR>; + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-peak-kBps = <160000 100000>; + opp-avg-kBps = <50000 0>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + opp-peak-kBps = <200000 120000>; + opp-avg-kBps = <104000 0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,kaanapali-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x10000>, + <0x0 0x179600f0 0x0 0xf4>; + + qcom,pdc-ranges = <0 745 38>, + <40 785 11>, + <51 527 4>, + <58 534 2>, + <61 537 20>, + <84 559 14>, + <98 609 32>, + <130 717 12>, + <142 251 5>, + <147 796 16>, + <163 783 2>, + <165 531 2>, + <167 536 1>, + <168 557 2>, + <170 415 1>, + <171 438 1>, + <172 579 1>, + <173 703 1>, + <174 708 1>, + <175 714 1>, + <176 68 1>, + <177 86 1>, + <178 96 1>, + <179 249 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,kaanapali-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + + interrupts-extended = <&ipcc IPCC_MPROC_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_MPROC_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,kaanapali-tlmm"; + reg = <0x0 0x0f100000 0x0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 218>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup_uart7_default: qup-uart7-state { + /* TX, RX */ + pins = "gpio62", "gpio63"; + function = "qup1_se7"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + + card-detect-pins { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + sram@14680000 { + compatible = "qcom,kaanapali-imem", "mmio-sram"; + reg = <0x0 0x14680000 0x0 0x1000>; + ranges = <0x0 0x0 0x14680000 0x1000>; + + no-memory-wc; + + #address-cells = <1>; + #size-cells = <1>; + + pil-sram@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,kaanapali-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + dma-coherent; + }; + + intc: interrupt-controller@17000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17000000 0x0 0x10000>, + <0x0 0x17080000 0x0 0x200000>; + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17040000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x17040000 0x0 0x20000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + watchdog@17600000 { + compatible = "qcom,apss-wdt-kaanapali", "qcom,kpss-wdt"; + reg = <0x0 0x17600000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; + }; + + pdp0_mbox: mailbox@17610000 { + compatible = "qcom,kaanapali-cpucp-mbox", "qcom,x1e80100-cpucp-mbox"; + reg = <0x0 0x17610000 0x0 0x8000>, <0x0 0x19980000 0x0 0x8000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + + timer@17810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17810000 0x0 0x1000>; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x0 0x20000000>; + + frame@17811000 { + reg = <0x0 0x17811000 0x1000>, + <0x0 0x17812000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@17813000 { + reg = <0x0 0x17813000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17815000 { + reg = <0x0 0x17815000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17817000 { + reg = <0x0 0x17817000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@17819000 { + reg = <0x0 0x17819000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1781b000 { + reg = <0x0 0x1781b000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@1781d000 { + reg = <0x0 0x1781d000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18900000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18900000 0x0 0x10000>, + <0x0 0x18910000 0x0 0x10000>, + <0x0 0x18920000 0x0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&system_pd>; + label = "apps_rsc"; + + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, + <SLEEP_TCS 2>, + <WAKE_TCS 2>, + <CONTROL_TCS 0>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,kaanapali-rpmh-clk"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmhpd: power-controller { + compatible = "qcom,kaanapali-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_low_svs_d3: opp-50 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D3>; + }; + + rpmhpd_opp_low_svs_d2_1: opp-51 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2_1>; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1_1: opp-54 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1_1>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_low_svs_l0: opp-76 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L0>; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_low_svs_l2: opp-96 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L2>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp-224 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l0: opp-400 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L0>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + rpmhpd_opp_turbo_l2: opp-432 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>; + }; + + rpmhpd_opp_turbo_l3: opp-448 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>; + }; + + rpmhpd_opp_turbo_l4: opp-452 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>; + }; + + rpmhpd_opp_turbo_l5: opp-456 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L5>; + }; + + rpmhpd_opp_super_turbo_no_cpr: opp-480 { + opp-level = <RPMH_REGULATOR_LEVEL_SUPER_TURBO_NO_CPR>; + }; + }; + }; + }; + + nsp_noc: interconnect@260c0000 { + compatible = "qcom,kaanapali-nsp-noc"; + reg = <0x0 0x260c0000 0x0 0x21280>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + /* Cluster 0 */ + pmu@310b3400 { + compatible = "qcom,kaanapali-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x310b3400 0x0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2188000>; + }; + + opp-1 { + opp-peak-kBps = <5412000>; + }; + + opp-2 { + opp-peak-kBps = <6220000>; + }; + + opp-3 { + opp-peak-kBps = <6832000>; + }; + + opp-4 { + opp-peak-kBps = <8368000>; + }; + + opp-5 { + opp-peak-kBps = <10944000>; + }; + + opp-6 { + opp-peak-kBps = <12748000>; + }; + + opp-7 { + opp-peak-kBps = <14744000>; + }; + + opp-8 { + opp-peak-kBps = <16896000>; + }; + + opp-9 { + opp-peak-kBps = <19120000>; + }; + + opp-10 { + opp-peak-kBps = <21332000>; + }; + }; + }; + + /* Cluster 1 */ + pmu@310b7400 { + compatible = "qcom,kaanapali-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x310b7400 0x0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + gem_noc: interconnect@31100000 { + compatible = "qcom,kaanapali-gem-noc"; + reg = <0x0 0x31100000 0x0 0x153080>; + qcom,bcm-voters = <&apps_bcm_voter>; + #interconnect-cells = <2>; + }; + + system-cache-controller@31800000 { + compatible = "qcom,kaanapali-llcc"; + reg = <0x0 0x31800000 0x0 0x200000>, + <0x0 0x32800000 0x0 0x200000>, + <0x0 0x31c00000 0x0 0x200000>, + <0x0 0x32c00000 0x0 0x200000>, + <0x0 0x34800000 0x0 0x200000>, + <0x0 0x34c00000 0x0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc_broadcast_base", + "llcc_broadcast_and_base"; + + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + sram: sram@81f08000 { + compatible = "mmio-sram"; + reg = <0x0 0x81f08000 0x0 0x200>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x81f08000 0x200>; + + pdp_rx: scp-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + pdp_tx: scp-sram-section@100 { + compatible = "arm,scmi-shmem"; + reg = <0x100 0x80>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi index c2ccbb67f800..6079e67ea829 100644 --- a/arch/arm64/boot/dts/qcom/kodiak.dtsi +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi @@ -190,6 +190,11 @@ qcom,client-id = <1>; qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@9cb80000 { + reg = <0x0 0x9cb80000 0x0 0x800000>; + no-map; + }; }; cpus { @@ -2424,7 +2429,7 @@ status = "disabled"; - pcie@0 { + pcie1_port0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; @@ -2994,6 +2999,11 @@ compatible = "qcom,sc7280-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0x0 0x20000>, <0 0x03550000 0x0 0x10000>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 15>; @@ -4431,6 +4441,9 @@ qcom,glink-channels = "fastrpcglink-apps-dsp"; label = "adsp"; qcom,non-secure-domain; + memory-region = <&adsp_rpc_remote_heap_mem>; + qcom,vmids = <QCOM_SCM_VMID_LPASS + QCOM_SCM_VMID_ADSP_HEAP>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/lemans-el2.dtso b/arch/arm64/boot/dts/qcom/lemans-el2.dtso new file mode 100644 index 000000000000..ed615dce6c78 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/lemans-el2.dtso @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/* + * Lemans specific modifications required to boot in EL2. + */ + +/dts-v1/; +/plugin/; + +&iris { + status = "disabled"; +}; + +&remoteproc_adsp { + iommus = <&apps_smmu 0x3000 0x0>; +}; + +&remoteproc_cdsp0 { + iommus = <&apps_smmu 0x21c0 0x0400>; +}; + +&remoteproc_cdsp1 { + iommus = <&apps_smmu 0x29c0 0x0400>; +}; + +&remoteproc_gpdsp0 { + iommus = <&apps_smmu 0x38a0 0x0>; +}; + +&remoteproc_gpdsp1 { + iommus = <&apps_smmu 0x38c0 0x0>; +}; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index b40fa203e4a2..90fce947ca7e 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -38,6 +38,36 @@ stdout-path = "serial0:115200n8"; }; + connector-0 { + compatible = "usb-c-connector"; + label = "USB0-Type-C"; + data-role = "dual"; + power-role = "dual"; + + vbus-supply = <&vbus_supply_regulator_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb0_con_hs_ep: endpoint { + remote-endpoint = <&usb_0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb0_con_ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; + edp0-connector { compatible = "dp-connector"; label = "EDP0"; @@ -102,6 +132,15 @@ }; }; + vbus_supply_regulator_0: regulator-vbus-supply-0 { + compatible = "regulator-fixed"; + regulator-name = "vbus_supply_0"; + gpio = <&expander1 2 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + vmmc_sdc: regulator-vmmc-sdc { compatible = "regulator-fixed"; @@ -454,6 +493,51 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sa8775p/a663_zap.mbn"; +}; + +&i2c11 { + status = "okay"; + + usb-typec@67 { + compatible = "ti,hd3ss3220"; + reg = <0x67>; + + interrupts-extended = <&pmm8654au_2_gpios 5 IRQ_TYPE_EDGE_FALLING>; + + id-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb_id>, <&usb0_intr_state>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&usb0_con_ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb_0_dwc3_ss>; + }; + }; + }; + }; +}; + &i2c18 { status = "okay"; @@ -607,6 +691,16 @@ status = "okay"; }; +&pmm8654au_2_gpios { + usb0_intr_state: usb0-intr-state { + pins = "gpio5"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + &qup_i2c19_default { drive-strength = <2>; bias-pull-up; @@ -683,6 +777,16 @@ clock-frequency = <32768>; }; +&spi16 { + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + &tlmm { ethernet0_default: ethernet0-default-state { ethernet0_mdc: ethernet0-mdc-pins { @@ -746,11 +850,24 @@ }; }; + qup_i2c11_default: qup-i2c11-state { + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + sd_cd: sd-cd-state { pins = "gpio36"; function = "gpio"; bias-pull-up; }; + + usb_id: usb-id-state { + pins = "gpio50"; + function = "gpio"; + bias-pull-up; + }; }; &uart10 { @@ -779,11 +896,17 @@ }; &usb_0 { - dr_mode = "peripheral"; - status = "okay"; }; +&usb_0_dwc3_hs { + remote-endpoint = <&usb0_con_hs_ep>; +}; + +&usb_0_dwc3_ss { + remote-endpoint = <&hd3ss3220_out_ep>; +}; + &usb_0_hsphy { vdda-pll-supply = <&vreg_l7a>; vdda18-supply = <&vreg_l6c>; diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi index c69aa2f41ce2..8fb7d1fc6d56 100644 --- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi @@ -436,6 +436,14 @@ }; }; +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sa8775p/a663_zap.mbn"; +}; + &i2c11 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi index 0b154d57ba24..808827b83553 100644 --- a/arch/arm64/boot/dts/qcom/lemans.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi @@ -21,6 +21,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -54,6 +55,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&l2_0>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -83,6 +85,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&l2_1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -107,6 +110,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&l2_2>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -131,6 +135,7 @@ qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&l2_3>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -155,6 +160,7 @@ qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&l2_4>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -185,6 +191,7 @@ qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&l2_5>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -209,6 +216,7 @@ qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&l2_6>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -233,6 +241,7 @@ qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&l2_7>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -518,90 +527,18 @@ }; }; - aggre1_noc: interconnect-aggre1-noc { - compatible = "qcom,sa8775p-aggre1-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre2_noc: interconnect-aggre2-noc { - compatible = "qcom,sa8775p-aggre2-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - clk_virt: interconnect-clk-virt { compatible = "qcom,sa8775p-clk-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; - config_noc: interconnect-config-noc { - compatible = "qcom,sa8775p-config-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - dc_noc: interconnect-dc-noc { - compatible = "qcom,sa8775p-dc-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gem_noc: interconnect-gem-noc { - compatible = "qcom,sa8775p-gem-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gpdsp_anoc: interconnect-gpdsp-anoc { - compatible = "qcom,sa8775p-gpdsp-anoc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - lpass_ag_noc: interconnect-lpass-ag-noc { - compatible = "qcom,sa8775p-lpass-ag-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - mc_virt: interconnect-mc-virt { compatible = "qcom,sa8775p-mc-virt"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; - mmss_noc: interconnect-mmss-noc { - compatible = "qcom,sa8775p-mmss-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - nspa_noc: interconnect-nspa-noc { - compatible = "qcom,sa8775p-nspa-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - nspb_noc: interconnect-nspb-noc { - compatible = "qcom,sa8775p-nspb-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - pcie_anoc: interconnect-pcie-anoc { - compatible = "qcom,sa8775p-pcie-anoc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system_noc: interconnect-system-noc { - compatible = "qcom,sa8775p-system-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - /* Will be updated by the bootloader. */ memory@80000000 { device_type = "memory"; @@ -1098,6 +1035,18 @@ #mbox-cells = <2>; }; + qfprom: efuse@784000 { + compatible = "qcom,sa8775p-qfprom", "qcom,qfprom"; + reg = <0x0 0x00784000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@240c { + reg = <0x240c 0x1>; + bits = <0 8>; + }; + }; + gpi_dma2: dma-controller@800000 { compatible = "qcom,sa8775p-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0x0 0x00800000 0x0 0x60000>; @@ -2689,6 +2638,62 @@ reg = <0 0x010d2000 0 0x1000>; }; + config_noc: interconnect@14c0000 { + compatible = "qcom,sa8775p-config-noc"; + reg = <0x0 0x014c0000 0x0 0x13080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sa8775p-system-noc"; + reg = <0x0 0x01680000 0x0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16c0000 { + compatible = "qcom,sa8775p-aggre1-noc"; + reg = <0x0 0x016c0000 0x0 0x18080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sa8775p-aggre2-noc"; + reg = <0x0 0x01700000 0x0 0x1b080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; + }; + + pcie_anoc: interconnect@1760000 { + compatible = "qcom,sa8775p-pcie-anoc"; + reg = <0x0 0x01760000 0x0 0xc080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpdsp_anoc: interconnect@1780000 { + compatible = "qcom,sa8775p-gpdsp-anoc"; + reg = <0x0 0x01780000 0x0 0xe080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@17a0000 { + compatible = "qcom,sa8775p-mmss-noc"; + reg = <0x0 0x017a0000 0x0 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x0 0x01d84000 0x0 0x3000>; @@ -2769,6 +2774,25 @@ <&apps_smmu 0x481 0x00>; }; + crypto: crypto@1dfa000 { + compatible = "qcom,sa8775p-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,sa8775p-lpass-ag-noc"; + reg = <0x0 0x03c40000 0x0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + ctcu@4001000 { compatible = "qcom,sa8775p-ctcu"; reg = <0x0 0x04001000 0x0 0x1000>; @@ -2961,6 +2985,14 @@ <&apss_funnel1_out>; }; }; + + port@5 { + reg = <5>; + + funnel1_in5: endpoint { + remote-endpoint = <&dlct0_funnel_out>; + }; + }; }; }; @@ -3118,6 +3150,60 @@ }; }; + tpda@4ad3000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x4ad3000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@10 { + reg = <16>; + dlct0_tpda_in16: endpoint { + remote-endpoint = <&turing0_funnel_out>; + }; + }; + }; + + out-ports { + port { + dlct0_tpda_out: endpoint { + remote-endpoint = + <&dlct0_funnel_in0>; + }; + }; + }; + + }; + + funnel@4ad4000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4ad4000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + dlct0_funnel_in0: endpoint { + remote-endpoint = <&dlct0_tpda_out>; + }; + }; + }; + + out-ports { + port { + dlct0_funnel_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + funnel@4b04000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x0 0x4b04000 0x0 0x1000>; @@ -3390,6 +3476,35 @@ clock-names = "apb_pclk"; }; + funnel@4b83000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x4b83000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + turing0_funnel_in1: endpoint { + remote-endpoint = <&turing_llm_tpdm_out>; + }; + }; + }; + + out-ports { + port { + turing0_funnel_out: endpoint { + remote-endpoint = <&dlct0_tpda_in16>; + }; + }; + }; + }; + etm@6040000 { compatible = "arm,primecell"; reg = <0x0 0x6040000 0x0 0x1000>; @@ -3981,6 +4096,20 @@ reg = <0x0 0x0891c000 0x0 0x84>; }; + dc_noc: interconnect@90e0000 { + compatible = "qcom,sa8775p-dc-noc"; + reg = <0x0 0x090e0000 0x0 0x5080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,sa8775p-gem-noc"; + reg = <0x0 0x09100000 0x0 0xf6080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + usb_0: usb@a600000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a600000 0 0xfc100>; @@ -4026,7 +4155,27 @@ snps,dis-u1-entry-quirk; snps,dis-u2-entry-quirk; + usb-role-switch; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_0_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_0_dwc3_ss: endpoint { + }; + }; + }; }; usb_1: usb@a800000 { @@ -4135,6 +4284,113 @@ reg = <0x0 0x1fc0000 0x0 0x30000>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-663.0", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0 0xc00>, + <&adreno_smmu 1 0xc00>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + gpu_zap_shader: zap-shader { + memory-region = <&pil_gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-405000000 { + opp-hz = /bits/ 64 <405000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5285156>; + opp-supported-hw = <0x3>; + }; + + opp-530000000 { + opp-hz = /bits/ 64 <530000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <12484375>; + opp-supported-hw = <0x2>; + }; + + opp-676000000 { + opp-hz = /bits/ 64 <676000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <8171875>; + opp-supported-hw = <0x1>; + }; + + opp-778000000 { + opp-hz = /bits/ 64 <778000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <10687500>; + opp-supported-hw = <0x1>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <12484375>; + opp-supported-hw = <0x1>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-663.0", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x34000>, + <0x0 0x03de0000 0x0 0x10000>, + <0x0 0x0b290000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0xc00>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sa8775p-gpucc"; reg = <0x0 0x03d90000 0x0 0xa000>; @@ -4928,7 +5184,7 @@ port@1 { reg = <1>; - mdss0_dsi0_out: endpoint{ }; + mdss0_dsi0_out: endpoint { }; }; }; @@ -6888,6 +7144,13 @@ status = "disabled"; }; + nspa_noc: interconnect@260c0000 { + compatible = "qcom,sa8775p-nspa-noc"; + reg = <0x0 0x260c0000 0x0 0x16080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + remoteproc_cdsp0: remoteproc@26300000 { compatible = "qcom,sa8775p-cdsp0-pas"; reg = <0x0 0x26300000 0x0 0x10000>; @@ -7020,9 +7283,16 @@ }; }; + nspb_noc: interconnect@2a0c0000 { + compatible = "qcom,sa8775p-nspb-noc"; + reg = <0x0 0x2a0c0000 0x0 0x16080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + remoteproc_cdsp1: remoteproc@2a300000 { compatible = "qcom,sa8775p-cdsp1-pas"; - reg = <0x0 0x2A300000 0x0 0x10000>; + reg = <0x0 0x2a300000 0x0 0x10000>; interrupts-extended = <&intc GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp1_in 0 IRQ_TYPE_EDGE_RISING>, @@ -7395,8 +7665,15 @@ thermal-sensors = <&tsens0 5>; + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpuss0_alert0: trip-point0 { temperature = <105000>; hysteresis = <5000>; type = "passive"; @@ -7415,8 +7692,15 @@ thermal-sensors = <&tsens0 6>; + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpuss1_alert0: trip-point0 { temperature = <105000>; hysteresis = <5000>; type = "passive"; @@ -7435,8 +7719,15 @@ thermal-sensors = <&tsens0 7>; + cooling-maps { + map0 { + trip = <&gpuss2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpuss2_alert0: trip-point0 { temperature = <105000>; hysteresis = <5000>; type = "passive"; @@ -7625,8 +7916,15 @@ thermal-sensors = <&tsens1 5>; + cooling-maps { + map0 { + trip = <&gpuss3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpuss3_alert0: trip-point0 { temperature = <105000>; hysteresis = <5000>; type = "passive"; @@ -7645,8 +7943,15 @@ thermal-sensors = <&tsens1 6>; + cooling-maps { + map0 { + trip = <&gpuss4_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpuss4_alert0: trip-point0 { temperature = <105000>; hysteresis = <5000>; type = "passive"; @@ -7665,8 +7970,15 @@ thermal-sensors = <&tsens1 7>; + cooling-maps { + map0 { + trip = <&gpuss5_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + trips { - trip-point0 { + gpuss5_alert0: trip-point0 { temperature = <105000>; hysteresis = <5000>; type = "passive"; @@ -8269,6 +8581,20 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; + turing-llm-tpdm { + compatible = "qcom,coresight-static-tpdm"; + + qcom,cmb-element-bits = <32>; + + out-ports { + port { + turing_llm_tpdm_out: endpoint { + remote-endpoint = <&turing0_funnel_in1>; + }; + }; + }; + }; + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sa8775p"; reg = <0x0 0x01c00000 0x0 0x3000>, diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts new file mode 100644 index 000000000000..52895dd9e4fa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts @@ -0,0 +1,790 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com> + */ + +/dts-v1/; + +#define PMIV0104_SID 7 + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "milos.dtsi" +#include "pm7550.dtsi" +#include "pm8550vs.dtsi" +#include "pmiv0104.dtsi" /* PMIV0108 */ +#include "pmk8550.dtsi" /* PMK7635 */ +#include "pmr735b.dtsi" + +/ { + model = "The Fairphone (Gen. 6)"; + compatible = "fairphone,fp6", "qcom,milos"; + chassis-type = "handset"; + + aliases { + serial0 = &uart5; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + switch { + label = "Switch"; + gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; + linux,input-type = <EV_SW>; + linux,code = <SW_MUTE_DEVICE>; + }; + }; + + pmic-glink { + compatible = "qcom,milos-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + }; + }; + }; + + vreg_ff_afvdd_2p8: regulator-ff-afvdd-2p8 { + compatible = "regulator-fixed"; + regulator-name = "ff_afvdd_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <100>; + + gpio = <&tlmm 93 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_bob>; + }; + + vreg_uw_afvdd_2p8: regulator-uw-afvdd-2p8 { + compatible = "regulator-fixed"; + regulator-name = "uw_afvdd_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + startup-delay-us = <100>; + + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_bob>; + }; + + vreg_uw_dvdd: regulator-uw-dvdd { + compatible = "regulator-fixed"; + regulator-name = "uw_dvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + startup-delay-us = <100>; + + gpio = <&tlmm 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_s1b>; + }; + + vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 { + compatible = "regulator-fixed"; + regulator-name = "ois_avdd0_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <100>; + + gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_bob>; + }; + + vreg_ois_vdd: regulator-ois-vdd { + compatible = "regulator-fixed"; + regulator-name = "ois_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100>; + + gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + }; + + vreg_oled_dvdd_1p2: regulator-oled-dvdd-1p2 { + compatible = "regulator-fixed"; + regulator-name = "oled_dvdd_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_s2b>; + + regulator-boot-on; + }; + + vreg_s1j: regulator-pm3001a-s1j { + compatible = "regulator-fixed"; + regulator-name = "pm3001a_s1j"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + startup-delay-us = <1000>; + + gpio = <&pmr735b_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + + pinctrl-0 = <&s1j_enable_default>; + pinctrl-names = "default"; + }; + + vreg_vtof_ldo_3p3: regulator-vtof-ldo-3p3 { + compatible = "regulator-fixed"; + regulator-name = "vtof_ldo_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100>; + + gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + thermal-zones { + pm8008-thermal { + polling-delay-passive = <100>; + thermal-sensors = <&pm8008>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7550-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1b>; + vdd-l2-l3-supply = <&vreg_s3b>; + vdd-l4-l5-supply = <&vreg_s2b>; + vdd-l6-supply = <&vreg_s2b>; + vdd-l7-supply = <&vreg_s1b>; + vdd-l8-supply = <&vreg_s1b>; + vdd-l9-l10-supply = <&vreg_s1b>; + vdd-l11-supply = <&vreg_s1b>; + vdd-l12-l14-supply = <&vreg_bob>; + vdd-l13-l16-supply = <&vreg_bob>; + vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "b"; + + vreg_s1b: smps1 { + regulator-name = "vreg_s1b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2080000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2b: smps2 { + regulator-name = "vreg_s2b"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1408000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3b: smps3 { + regulator-name = "vreg_s3b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <1040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b: ldo2 { + regulator-name = "vreg_l2b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b: ldo5 { + regulator-name = "vreg_l5b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b: ldo7 { + regulator-name = "vreg_l7b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b: ldo8 { + regulator-name = "vreg_l8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b: ldo9 { + regulator-name = "vreg_l9b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b: ldo10 { + regulator-name = "vreg_l10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b: ldo11 { + regulator-name = "vreg_l11b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b: ldo12 { + regulator-name = "vreg_l12b"; + /* + * Skip voltage voting for UFS VCC. + */ + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b: ldo13 { + regulator-name = "vreg_l13b"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b: ldo14 { + regulator-name = "vreg_l14b"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b: ldo15 { + regulator-name = "vreg_l15b"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b: ldo16 { + regulator-name = "vreg_l16b"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b: ldo17 { + regulator-name = "vreg_l17b"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b: ldo18 { + regulator-name = "vreg_l18b"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b: ldo19 { + regulator-name = "vreg_l19b"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20b: ldo20 { + regulator-name = "vreg_l20b"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21b: ldo21 { + regulator-name = "vreg_l21b"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l22b: ldo22 { + regulator-name = "vreg_l22b"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l23b: ldo23 { + regulator-name = "vreg_l23b"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3b>; + vdd-l3-supply = <&vreg_s3b>; + + qcom,pmic-id = "c"; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <650000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmr735b-rpmh-regulators"; + + vdd-l1-l2-supply= <&vreg_s3b>; + vdd-l3-supply= <&vreg_s3b>; + vdd-l4-supply= <&vreg_s1b>; + vdd-l5-supply= <&vreg_s2b>; + vdd-l6-supply= <&vreg_s2b>; + vdd-l7-l8-supply= <&vreg_s2b>; + vdd-l9-supply= <&vreg_s3b>; + vdd-l10-supply= <&vreg_s1b>; + vdd-l11-supply= <&vreg_s3b>; + vdd-l12-supply= <&vreg_s3b>; + + qcom,pmic-id = "f"; + + vreg_l1f: ldo1 { + regulator-name = "vreg_l1f"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f: ldo2 { + regulator-name = "vreg_l2f"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f: ldo3 { + regulator-name = "vreg_l3f"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4f: ldo4 { + regulator-name = "vreg_l4f"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f: ldo5 { + regulator-name = "vreg_l5f"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f: ldo6 { + regulator-name = "vreg_l6f"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f: ldo7 { + regulator-name = "vreg_l7f"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8f: ldo8 { + regulator-name = "vreg_l8f"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1320000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9f: ldo9 { + regulator-name = "vreg_l9f"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10f: ldo10 { + regulator-name = "vreg_l10f"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11f: ldo11 { + regulator-name = "vreg_l11f"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <864000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_PCIE_1_AUX_CLK>, <GCC_PCIE_1_AUX_CLK_SRC>, + <GCC_PCIE_1_CFG_AHB_CLK>, <GCC_PCIE_1_MSTR_AXI_CLK>, + <GCC_PCIE_1_PHY_RCHNG_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>, + <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>, + <GCC_PCIE_1_PIPE_DIV2_CLK>, <GCC_PCIE_1_PIPE_DIV2_CLK_SRC>, + <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>; +}; + +&i2c1 { + /* Samsung NFC @ 0x27 */ + + status = "okay"; +}; + +&i2c3 { + /* AW88261FCR amplifier (top) @ 0x34 */ + /* AW88261FCR amplifier (bottom) @ 0x35 */ + + status = "okay"; +}; + +&i2c7 { + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&pmr735b_gpios 3 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s2b>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_s1b>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>; + pinctrl-names = "default"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1144000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3000000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2900000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; + + /* VL53L3 ToF @ 0x29 */ + /* AW86938FCR vibrator @ 0x5a */ +}; + +&pm8550vs_c { + status = "okay"; +}; + +&pmiv0104_eusb2_repeater { + vdd18-supply = <&vreg_l7b>; + vdd3-supply = <&vreg_l17b>; + + qcom,tune-res-fsdif = /bits/ 8 <0x5>; + qcom,tune-usb2-amplitude = /bits/ 8 <0x8>; + qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>; + qcom,tune-usb2-preem = /bits/ 8 <0x6>; +}; + +&pmr735b_gpios { + s1j_enable_default: s1j-enable-default-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <0>; + bias-disable; + output-low; + }; + + pm8008_reset_n_default: pm8008-reset-n-default-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-down; + }; +}; + +&pm7550_gpios { + volume_up_default: volume-up-default-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + }; +}; + +&pm7550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>, <4>; + led-max-microamp = <350000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <400000>; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/milos/fairphone/fp6/adsp.mbn", + "qcom/milos/fairphone/fp6/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/milos/fairphone/fp6/cdsp.mbn", + "qcom/milos/fairphone/fp6/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/milos/fairphone/fp6/modem.mbn"; + + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/milos/fairphone/fp6/wpss.mbn"; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l13b>; + vqmmc-supply = <&vreg_l23b>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&spi0 { + /* Eswin EPH8621 touchscreen @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <8 4>, /* Fingerprint SPI */ + <13 1>, /* NC */ + <63 2>; /* WLAN UART */ + + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + pm8008_int_default: pm8008-int-default-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart5 { + status = "okay"; +}; + +&usb_1 { + dr_mode = "otg"; + + /* USB 2.0 only, HW does not support USB 3.x */ + qcom,select-utmi-as-pipe-clk; + + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l2b>; + vdda12-supply = <&vreg_l4b>; + + phys = <&pmiv0104_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi new file mode 100644 index 000000000000..e1a51d43943f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/milos.dtsi @@ -0,0 +1,2633 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com> + */ + +#include <dt-bindings/clock/qcom,milos-camcc.h> +#include <dt-bindings/clock/qcom,milos-dispcc.h> +#include <dt-bindings/clock/qcom,milos-gcc.h> +#include <dt-bindings/clock/qcom,milos-gpucc.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8650-tcsr.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,milos-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0x0 0x0>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0x0 0x100>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0x0 0x200>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + + l2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0x0 0x300>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_2>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x400>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&cpu_pd4>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_4>; + capacity-dmips-mhz = <1670>; + dynamic-power-coefficient = <264>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + l2_4: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x500>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&cpu_pd5>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_5>; + capacity-dmips-mhz = <1670>; + dynamic-power-coefficient = <264>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + l2_5: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x600>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&cpu_pd6>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_6>; + capacity-dmips-mhz = <1670>; + dynamic-power-coefficient = <264>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + l2_6: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0x0 0x700>; + + clocks = <&cpufreq_hw 2>; + + power-domains = <&cpu_pd7>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&l2_7>; + capacity-dmips-mhz = <1670>; + dynamic-power-coefficient = <287>; + + qcom,freq-domain = <&cpufreq_hw 2>; + + #cooling-cells = <2>; + + l2_7: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + silver_cpu_sleep_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pc"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <250>; + exit-latency-us = <700>; + min-residency-us = <5200>; + local-timer-stop; + }; + + silver_cpu_sleep_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <550>; + exit-latency-us = <750>; + min-residency-us = <6700>; + local-timer-stop; + }; + + gold_cpu_sleep_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <5511>; + local-timer-stop; + }; + + gold_cpu_sleep_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1300>; + min-residency-us = <8136>; + local-timer-stop; + }; + + gold_plus_cpu_sleep_0: cpu-sleep-2-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-plus-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1500>; + min-residency-us = <8551>; + local-timer-stop; + }; + }; + + domain-idle-states { + cluster_sleep_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <750>; + exit-latency-us = <2350>; + min-residency-us = <9144>; + }; + + cluster_sleep_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41003344>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-milos", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x19000>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,milos-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,milos-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@0 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0 0 0>; + }; + + pmu-a520 { + compatible = "arm,cortex-a520-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; + }; + + pmu-a720 { + compatible = "arm,cortex-a720-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&silver_cpu_sleep_0>, <&silver_cpu_sleep_1>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&silver_cpu_sleep_0>, <&silver_cpu_sleep_1>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&silver_cpu_sleep_0>, <&silver_cpu_sleep_1>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&silver_cpu_sleep_0>, <&silver_cpu_sleep_1>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&gold_cpu_sleep_0>, <&gold_cpu_sleep_1>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&gold_cpu_sleep_0>, <&gold_cpu_sleep_1>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&gold_cpu_sleep_0>, <&gold_cpu_sleep_1>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&gold_plus_cpu_sleep_0>; + }; + + cluster_pd: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_sleep_0>, <&cluster_sleep_1>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp-region@80000000 { + reg = <0x0 0x80000000 0x0 0xe00000>; + no-map; + }; + + xbl_sc_mem: xbl-sc-region@81800000 { + reg = <0x0 0x81800000 0x0 0x40000>; + no-map; + }; + + cpucp_fw_mem: cpucp-fw-region@81840000 { + reg = <0x0 0x81840000 0x0 0x1c0000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog-region@81a00000 { + reg = <0x0 0x81a00000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump-region@81a40000 { + reg = <0x0 0x81a40000 0x0 0x1c0000>; + no-map; + }; + + aop_image_mem: aop-image-region@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-region@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config-region@81c80000 { + reg = <0x0 0x81c80000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: tme-crash-dump-region@81ca0000 { + reg = <0x0 0x81ca0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log-region@81ce0000 { + reg = <0x0 0x81ce0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log-region@81ce4000 { + reg = <0x0 0x81ce4000 0x0 0x10000>; + no-map; + }; + + chipinfo_mem: chipinfo-region@81cf4000 { + reg = <0x0 0x81cf4000 0x0 0x1000>; + no-map; + }; + + secdata_apss_mem: secdata-apss-region@81cff000 { + reg = <0x0 0x81cff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem-region@81d00000 { + compatible = "qcom,smem"; + reg = <0x0 0x81d00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi-region@81f00000 { + reg = <0x0 0x81f00000 0x0 0x20000>; + no-map; + }; + + pvm_fw_mem: pvm-fw-region@824a0000 { + reg = <0x0 0x824a0000 0x0 0x100000>; + no-map; + }; + + hyp_mem_database_mem: hyp-mem-database-region@825a0000 { + reg = <0x0 0x825a0000 0x0 0x60000>; + no-map; + }; + + global_sync_mem: global-sync-region@82600000 { + reg = <0x0 0x82600000 0x0 0x100000>; + no-map; + }; + + tz_stat_mem: tz-stat-region@82700000 { + reg = <0x0 0x82700000 0x0 0x100000>; + no-map; + }; + + qdss_apps_mem: qdss-apps-region@82800000 { + reg = <0x0 0x82800000 0x0 0x2000000>; + reusable; + }; + + mpss_mem: mpss-region@8ac00000 { + reg = <0x0 0x8ac00000 0x0 0xe600000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb-region@99200000 { + reg = <0x0 0x99200000 0x0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb-region@99280000 { + reg = <0x0 0x99280000 0x0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi-region@99300000 { + reg = <0x0 0x99300000 0x0 0x2800000>; + no-map; + }; + + wpss_mem: wpss-region@9bb00000 { + reg = <0x0 0x9bb00000 0x0 0x1900000>; + no-map; + }; + + video_mem: video-region@9d400000 { + reg = <0x0 0x9d400000 0x0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp-region@9db00000 { + reg = <0x0 0x9db00000 0x0 0xf00000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9ea00000 { + reg = <0x0 0x9ea00000 0x0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw-region@9ea80000 { + reg = <0x0 0x9ea80000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi-region@9ea90000 { + reg = <0x0 0x9ea90000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode-region@9ea9a000 { + reg = <0x0 0x9ea9a000 0x0 0x2000>; + no-map; + }; + + camera_mem: camera-region@9eb00000 { + reg = <0x0 0x9eb00000 0x0 0x800000>; + no-map; + }; + + wlan_msa_mem: wlan-msa-region@a6400000 { + reg = <0x0 0xa6400000 0x0 0xc00000>; + no-map; + }; + + cpusys_vm_mem: cpusys-vm-region@e0600000 { + reg = <0x0 0xe0600000 0x0 0x400000>; + no-map; + }; + + rmtfs_mem: rmtfs@e1f00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xe1f00000 0x0 0x600000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + + qtee_mem: qtee-region@e8900000 { + reg = <0x0 0xe8900000 0x0 0x500000>; + no-map; + }; + + tags_mem: tags-region@e8e00000 { + reg = <0x0 0xe8e00000 0x0 0x700000>; + no-map; + }; + + trusted_apps_mem: trusted-apps-region@e9500000 { + reg = <0x0 0xe9500000 0x0 0x1200000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_ipa_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_ipa_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wpss { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <13>; + + smp2p_wpss_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_wpss_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_wlan_out: wlan-ap-to-wpss { + qcom,entry-name = "wlan"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_wlan_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,milos-gcc"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, /* pcie_0_pipe_clk */ + <0>, /* pcie_1_pipe_clk */ + <0>, /* ufs_phy_rx_symbol_0_clk */ + <0>, /* ufs_phy_rx_symbol_1_clk */ + <0>, /* ufs_phy_tx_symbol_0_clk */ + <0>; /* usb3_phy_wrapper_gcc_usb30_pipe_clk */ + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipcc: mailbox@405000 { + compatible = "qcom,milos-ipcc", "qcom,ipcc"; + reg = <0x0 0x00405000 0x0 0x1000>; + + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + gpi_dma1: dma-controller@800000 { + compatible = "qcom,milos-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00800000 0x0 0x60000>; + + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>; + + dma-channels = <12>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x36 0x0>; + dma-coherent; + }; + + qupv3_id_1: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core"; + + iommus = <&apps_smmu 0x23 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c7: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart11: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00890000 0x0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart11_default>, <&qup_uart11_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@a00000 { + compatible = "qcom,milos-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x00a00000 0x0 0x60000>; + + interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x576 0x0>; + dma-coherent; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core"; + + iommus = <&apps_smmu 0x563 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + + interrupts = <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + + interrupts = <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + + interrupts = <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart5: serial@a94000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a94000 0x0 0x4000>; + + interrupts = <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH 0>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart5_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + rng: rng@10c3000 { + compatible = "qcom,milos-trng", "qcom,trng"; + reg = <0x0 0x010c3000 0x0 0x1000>; + }; + + mmss_noc: interconnect@1400000 { + compatible = "qcom,milos-mmss-noc"; + reg = <0x0 0x01400000 0x0 0xdb800>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,milos-cnoc-main"; + reg = <0x0 0x01500000 0x0 0x14400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + cnoc_cfg: interconnect@1600000 { + compatible = "qcom,milos-cnoc-cfg"; + reg = <0x0 0x01600000 0x0 0x6e00>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,milos-system-noc"; + reg = <0x0 0x01680000 0x0 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect@16c0000 { + compatible = "qcom,milos-pcie-anoc"; + reg = <0x0 0x016c0000 0x0 0x12400>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,milos-aggre1-noc"; + reg = <0x0 0x016e0000 0x0 0x16400>; + #interconnect-cells = <2>; + clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,milos-aggre2-noc"; + reg = <0x0 0x01700000 0x0 0x1f400>; + #interconnect-cells = <2>; + clocks = <&rpmhcc RPMH_IPA_CLK>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,milos-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0xa0000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,milos-adsp-pas"; + reg = <0x0 0x03000000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + interconnects = <&lpass_ag_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,milos-lpass-ag-noc"; + reg = <0x0 0x03c40000 0x0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,milos-gpucc"; + reg = <0x0 0x03d90000 0x0 0x9800>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,milos-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,milos-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MSS>; + power-domain-names = "cx", + "mss"; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "mpss"; + qcom,remote-pid = <1>; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,milos-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + iommus = <&apps_smmu 0x540 0>; + + bus-width = <4>; + + qcom,dll-config = <0x0007442c>; + qcom,ddr-config = <0x80040868>; + + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,milos-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x088e3000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + remoteproc_wpss: remoteproc@8a00000 { + compatible = "qcom,milos-wpss-pas"; + reg = <0x0 0x08a00000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 579 IRQ_TYPE_EDGE_RISING 0>, + <&smp2p_wpss_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wpss_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wpss_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wpss_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wpss_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MX>; + power-domain-names = "cx", + "mx"; + + memory-region = <&wpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_wpss_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; + + usb_1: usb@a600000 { + compatible = "qcom,milos-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc000>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH 0>, + <&intc GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH 0>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 25 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + iommus = <&apps_smmu 0x40 0x0>; + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_cfg SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", "apps-usb"; + + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; + + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis_enblslpm_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,is-utmi-l1-suspend; + snps,parkmode-disable-ss-quirk; + tx-fifo-resize; + dma-coherent; + usb-role-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + }; + }; + + videocc: clock-controller@aaf0000 { + compatible = "qcom,milos-videocc"; + reg = <0x0 0x0aaf0000 0x0 0x10000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&gcc GCC_VIDEO_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@adb0000 { + compatible = "qcom,milos-camcc"; + reg = <0x0 0x0adb0000 0x0 0x40000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&gcc GCC_CAMERA_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,milos-dispcc"; + reg = <0x0 0x0af00000 0x0 0x20000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <0>, /* dsi0_phy_pll_out_byteclk */ + <0>, /* dsi0_phy_pll_out_dsiclk */ + <0>, /* dp0_phy_pll_link_clk */ + <0>; /* dp0_phy_pll_vco_div_clk */ + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,milos-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x30000>, + <0x0 0x174000f0 0x0 0x64>; + interrupt-parent = <&intc>; + + qcom,pdc-ranges = <0 480 40>, <40 140 11>, <51 527 47>, + <98 609 31>, <129 63 1>, <130 716 12>, + <142 251 5>; + + #interrupt-cells = <2>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c228000 { + compatible = "qcom,milos-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c228000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <15>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,milos-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c229000 0x0 0x1000>, + <0x0 0x0c223000 0x0 0x1000>; + + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <14>; + + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,milos-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c3f0000 0x0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c400000 0x0 0x3000>, + <0x0 0x0c500000 0x0 0x400000>, + <0x0 0x0c440000 0x0 0x80000>, + <0x0 0x0c4c0000 0x0 0x10000>, + <0x0 0x0c42d000 0x0 0x4000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,milos-tlmm"; + reg = <0x0 0x0f100000 0x0 0x300000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 168>; + + wakeup-parent = <&pdc>; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio15", "gpio16"; + function = "qup0_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart5_default: qup-uart5-default-state { + /* TX, RX */ + pins = "gpio25", "gpio26"; + function = "qup0_se5"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart11_default: qup-uart11-default-state { + /* TX, RX */ + pins = "gpio50", "gpio51"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart11_cts_rts: qup-uart11-cts-rts-state { + /* CTS, RTS */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "gpio62"; + function = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "gpio61"; + function = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "gpio58", "gpio57", "gpio35", "gpio34"; + function = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "gpio58", "gpio57", "gpio35", "gpio34"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,milos-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>; + dma-coherent; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17100000 0x0 0x10000>, + <0x0 0x17180000 0x0 0x200000>; + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + #interrupt-cells = <4>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + }; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0x0 0x17140000 0x0 0x20000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17420000 0x0 0x1000>; + + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; + + frame-number = <0>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>; + + power-domains = <&cluster_pd>; + + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,milos-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,milos-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,milos-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x17d91000 0x0 0x1000>, + <0x0 0x17d92000 0x0 0x1000>, + <0x0 0x17d93000 0x0 0x1000>; + reg-names = "freq-domain0", + "freq-domain1", + "freq-domain2"; + + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPLL0>; + clock-names = "xo", + "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,milos-gem-noc"; + reg = <0x0 0x24100000 0x0 0xff080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,milos-nsp-noc"; + reg = <0x0 0x320c0000 0x0 0xe080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,milos-cdsp-pas"; + reg = <0x0 0x32300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MX>; + power-domain-names = "cx", + "mx"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + }; + }; + }; + + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + aoss0-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + cpuss0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + cpuss1-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu4-left-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + cpu4-left-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-right-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + cpu4-right-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-left-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + cpu5-left-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-right-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + cpu5-right-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-left-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + cpu6-left-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-right-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + cpu6-right-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-left-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + cpu7-left-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-right-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + cpu7-right-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + cpu0-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + cpu1-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + thermal-sensors = <&tsens0 13>; + + trips { + cpu2-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + thermal-sensors = <&tsens0 14>; + + trips { + cpu3-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + aoss1-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + aoss1-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx0-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 1>; + + trips { + nsphvx0-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + nsphvx0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx1-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 2>; + + trips { + nsphmx1-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + nsphmx1-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx0-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 3>; + + trips { + nsphmx0-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + nsphmx0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 4>; + + trips { + gpu0_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + gpuss0-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 5>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + + gpuss1-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + video-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + video-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <10>; + + thermal-sensors = <&tsens1 8>; + + trips { + ddr-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + ddr-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + camera0-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + camera0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem0-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem0-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&tsens1 11>; + + trips { + modem1-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem1-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&tsens1 12>; + + trips { + modem2-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem2-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&tsens1 13>; + + trips { + modem3-hot { + temperature = <110000>; + hysteresis = <1000>; + type = "hot"; + }; + + modem3-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW 0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts index bb35893da73d..565418b86b2a 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -323,6 +324,16 @@ status = "okay"; + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + eeprom0: eeprom@50 { compatible = "atmel,24c256"; reg = <0x50>; @@ -400,6 +411,44 @@ status = "okay"; }; +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&pcieport0 { + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; +}; + +&pcieport1 { + reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; +}; + &qupv3_id_0 { firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; @@ -434,7 +483,41 @@ status = "okay"; }; +&spi10 { + status = "okay"; + + tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + &tlmm { + + pcie0_default_state: pcie0-default-state { + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + ethernet0_default: ethernet0-default-state { ethernet0_mdc: ethernet0-mdc-pins { pins = "gpio5"; @@ -458,6 +541,29 @@ bias-pull-up; }; + pcie1_default_state: pcie1-default-state { + wake-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio22"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + qup_i2c15_default: qup-i2c15-state { pins = "gpio91", "gpio92"; function = "qup1_se7"; diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi index 816fa2af8a9a..5d2df4305d1c 100644 --- a/arch/arm64/boot/dts/qcom/monaco.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -55,6 +55,7 @@ power-domain-names = "psci"; capacity-dmips-mhz = <1946>; dynamic-power-coefficient = <472>; + #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY @@ -79,6 +80,7 @@ power-domains = <&cpu_pd1>; power-domain-names = "psci"; capacity-dmips-mhz = <1946>; + #cooling-cells = <2>; dynamic-power-coefficient = <472>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; @@ -104,6 +106,7 @@ power-domains = <&cpu_pd2>; power-domain-names = "psci"; capacity-dmips-mhz = <1946>; + #cooling-cells = <2>; dynamic-power-coefficient = <507>; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu2_opp_table>; @@ -129,6 +132,7 @@ power-domains = <&cpu_pd3>; power-domain-names = "psci"; capacity-dmips-mhz = <1946>; + #cooling-cells = <2>; dynamic-power-coefficient = <507>; qcom,freq-domain = <&cpufreq_hw 2>; operating-points-v2 = <&cpu2_opp_table>; @@ -154,6 +158,7 @@ power-domains = <&cpu_pd4>; power-domain-names = "psci"; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; @@ -179,6 +184,7 @@ power-domains = <&cpu_pd5>; power-domain-names = "psci"; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; @@ -204,6 +210,7 @@ power-domains = <&cpu_pd6>; power-domain-names = "psci"; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; @@ -229,6 +236,7 @@ power-domains = <&cpu_pd7>; power-domain-names = "psci"; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; @@ -904,8 +912,8 @@ #power-domain-cells = <1>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <0>, <0>, @@ -929,7 +937,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@240c { + gpu_speed_bin: gpu-speed-bin@240c { reg = <0x240c 0x1>; bits = <0 8>; }; @@ -2256,6 +2264,376 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-qcs8300", "qcom,pcie-sa8775p"; + reg = <0x0 0x01c00000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf20>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x4000>, + <0x0 0x40100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <0>; + num-lanes = <2>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_anoc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>, + <&gcc GCC_PCIE_0_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_0_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55>; + + operating-points-v2 = <&pcie0_opp_table>; + + status = "disabled"; + + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1 x2 and GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 2 x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3 x2 and GEN 4 x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 4 x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + }; + + pcieport0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie0_phy>; + }; + }; + + pcie0_phy: phy@1c04000 { + compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x01c04000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c10000 { + device_type = "pci"; + compatible = "qcom,pcie-qcs8300", "qcom,pcie-sa8775p"; + reg = <0x0 0x01c10000 0x0 0x3000>, + <0x0 0x60000000 0x0 0xf20>, + <0x0 0x60000f20 0x0 0xa8>, + <0x0 0x60001000 0x0 0x4000>, + <0x0 0x60100000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <1>; + num-lanes = <4>; + + interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_anoc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &pcie_smmu 0x0080 0x1>, + <0x100 &pcie_smmu 0x0081 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + + operating-points-v2 = <&pcie1_opp_table>; + + status = "disabled"; + + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1 x2 and GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 1 x4 and GEN 2 x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 2 x4 */ + opp-20000000 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3 x2 and GEN 4 x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 3 x4 and GEN 4 x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + + /* GEN 4 x4 */ + opp-64000000 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <7876000 1>; + }; + }; + + pcieport1: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie1_phy>; + }; + }; + + pcie1_phy: phy@1c14000 { + compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy"; + reg = <0x0 0x01c14000 0x0 0x4000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x0 0x01d84000 0x0 0x3000>; @@ -2350,6 +2728,18 @@ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; }; + crypto: crypto@1dfa000 { + compatible = "qcom,qcs8300-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x481 0x0>; + interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x20000>; @@ -2483,6 +2873,35 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + ctcu@4001000 { + compatible = "qcom,qcs8300-ctcu", "qcom,sa8775p-ctcu"; + reg = <0x0 0x04001000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ctcu_in0: endpoint { + remote-endpoint = <&etr0_out>; + }; + }; + + port@1 { + reg = <1>; + + ctcu_in1: endpoint { + remote-endpoint = <&etr1_out>; + }; + }; + }; + }; + stm@4002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x0 0x04002000 0x0 0x1000>, @@ -2513,6 +2932,14 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + + swao_rep_out0: endpoint { + remote-endpoint = <&qdss_rep_in>; + }; + }; + port@1 { reg = <1>; @@ -2677,6 +3104,122 @@ }; }; + replicator@4046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x04046000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + qdss_rep_in: endpoint { + remote-endpoint = <&swao_rep_out0>; + }; + }; + }; + + out-ports { + port { + qdss_rep_out0: endpoint { + remote-endpoint = <&etr_rep_in>; + }; + }; + }; + }; + + tmc@4048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x04048000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + iommus = <&apps_smmu 0x04c0 0x00>; + + arm,scatter-gather; + + in-ports { + port { + etr0_in: endpoint { + remote-endpoint = <&etr_rep_out0>; + }; + }; + }; + + out-ports { + port { + etr0_out: endpoint { + remote-endpoint = <&ctcu_in0>; + }; + }; + }; + }; + + replicator@404e000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x0404e000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_rep_in: endpoint { + remote-endpoint = <&qdss_rep_out0>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + etr_rep_out0: endpoint { + remote-endpoint = <&etr0_in>; + }; + }; + + port@1 { + reg = <1>; + + etr_rep_out1: endpoint { + remote-endpoint = <&etr1_in>; + }; + }; + }; + }; + + tmc@404f000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x0404f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + iommus = <&apps_smmu 0x04a0 0x40>; + + arm,scatter-gather; + arm,buffer-size = <0x400000>; + + in-ports { + port { + etr1_in: endpoint { + remote-endpoint = <&etr_rep_out1>; + }; + }; + }; + + out-ports { + port { + etr1_out: endpoint { + remote-endpoint = <&ctcu_in1>; + }; + }; + }; + }; + tpdm@4841000 { compatible = "qcom,coresight-tpdm", "arm,primecell"; reg = <0x0 0x04841000 0x0 0x1000>; @@ -4776,6 +5319,178 @@ #power-domain-cells = <1>; }; + camss: isp@ac78000 { + compatible = "qcom,qcs8300-camss"; + + reg = <0x0 0xac78000 0x0 0x1000>, + <0x0 0xac7a000 0x0 0xf00>, + <0x0 0xac7c000 0x0 0xf00>, + <0x0 0xac84000 0x0 0xf00>, + <0x0 0xac88000 0x0 0xf00>, + <0x0 0xac8c000 0x0 0xf00>, + <0x0 0xac90000 0x0 0xf00>, + <0x0 0xac94000 0x0 0xf00>, + <0x0 0xac9c000 0x0 0x2000>, + <0x0 0xac9e000 0x0 0x2000>, + <0x0 0xaca0000 0x0 0x2000>, + <0x0 0xacac000 0x0 0x400>, + <0x0 0xacad000 0x0 0x400>, + <0x0 0xacae000 0x0 0x400>, + <0x0 0xac4d000 0x0 0xf000>, + <0x0 0xac60000 0x0 0xf000>, + <0x0 0xac85000 0x0 0xd00>, + <0x0 0xac89000 0x0 0xd00>, + <0x0 0xac8d000 0x0 0xd00>, + <0x0 0xac91000 0x0 0xd00>, + <0x0 0xac95000 0x0 0xd00>; + reg-names = "csid_wrapper", + "csid0", + "csid1", + "csid_lite0", + "csid_lite1", + "csid_lite2", + "csid_lite3", + "csid_lite4", + "csiphy0", + "csiphy1", + "csiphy2", + "tpg0", + "tpg1", + "tpg2", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1", + "vfe_lite2", + "vfe_lite3", + "vfe_lite4"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>, + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>, + <&camcc CAM_CC_CPAS_IFE_0_CLK>, + <&camcc CAM_CC_CPAS_IFE_1_CLK>, + <&camcc CAM_CC_CSID_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_ICP_AHB_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "camnoc_axi", + "core_ahb", + "cpas_ahb", + "cpas_fast_ahb_clk", + "cpas_vfe_lite", + "cpas_vfe0", + "cpas_vfe1", + "csid", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy_rx", + "gcc_axi_hf", + "gcc_axi_sf", + "icp_ahb", + "vfe0", + "vfe0_fast_ahb", + "vfe1", + "vfe1_fast_ahb", + "vfe_lite", + "vfe_lite_ahb", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csid_lite0", + "csid_lite1", + "csid_lite2", + "csid_lite3", + "csid_lite4", + "csiphy0", + "csiphy1", + "csiphy2", + "tpg0", + "tpg1", + "tpg2", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1", + "vfe_lite2", + "vfe_lite3", + "vfe_lite4"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ahb", + "hf_0"; + + iommus = <&apps_smmu 0x2400 0x20>; + + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "top"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,qcs8300-camcc"; reg = <0x0 0x0ade0000 0x0 0x20000>; @@ -4789,6 +5504,222 @@ #power-domain-cells = <1>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,qcs8300-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc MDSS_DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_DISP_CC_MDSS_CORE_GDSC>; + + iommus = <&apps_smmu 0x1000 0x402>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu"; + reg = <0x0 0x0ae01000 0x0 0x8f000>, + <0x0 0x0aeb0000 0x0 0x2008>; + reg-names = "mdp", "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_MDP_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss_dp0_phy: phy@aec2a00 { + compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy"; + + reg = <0x0 0x0aec2a00 0x0 0x19c>, + <0x0 0x0aec2200 0x0 0xec>, + <0x0 0x0aec2600 0x0 0xec>, + <0x0 0x0aec2000 0x0 0x1c8>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@af54000 { + compatible = "qcom,qcs8300-dp", "qcom,sa8775p-dp"; + + reg = <0x0 0x0af54000 0x0 0x200>, + <0x0 0x0af54200 0x0 0x200>, + <0x0 0x0af55000 0x0 0xc00>, + <0x0 0x0af56000 0x0 0x09c>, + <0x0 0x0af57000 0x0 0x09c>, + <0x0 0x0af58000 0x0 0x09c>, + <0x0 0x0af59000 0x0 0x09c>, + <0x0 0x0af5a000 0x0 0x23c>, + <0x0 0x0af5b000 0x0 0x23c>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel", + "stream_2_pixel", + "stream_3_pixel"; + assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>, + <&dispcc MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>; + assigned-clock-parents = <&mdss_dp0_phy 0>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>; + phys = <&mdss_dp0_phy>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sa8775p-dispcc0"; reg = <0x0 0x0af00000 0x0 0x20000>; @@ -4796,7 +5727,9 @@ <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <0>, <0>, <0>, + <&mdss_dp0_phy 0>, + <&mdss_dp0_phy 1>, + <0>, <0>, <0>, <0>, <0>, <0>; power-domains = <&rpmhpd RPMHPD_MMCX>; #clock-cells = <1>; @@ -4851,6 +5784,50 @@ <235 723 5>; }; + tsens2: thermal-sensor@c251000 { + compatible = "qcom,qcs8300-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c251000 0x0 0x1000>, + <0x0 0x0c224000 0x0 0x1000>; + interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c252000 { + compatible = "qcom,qcs8300-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c252000 0x0 0x1000>, + <0x0 0x0c225000 0x0 0x1000>; + interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,qcs8300-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c263000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,qcs8300-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c265000 0x0 0x1000>, + <0x0 0x0c223000 0x0 0x1000>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-management@c300000 { compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -6220,6 +7197,514 @@ }; }; + thermal_zones: thermal-zones { + aoss-0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + aoss0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-0-0-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-1-0-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-2-0-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-3-0-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpuss0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + audio-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + audio-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camss-0-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + camss-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pcie-0-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + pcie-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-0-0-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + cpuss0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + aoss1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-0-1-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-1-1-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-2-1-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-0-3-1-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpuss1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + video-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camss-1-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + camss1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pcie-1-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + pcie-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-0-1-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + cpuss0-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + aoss2-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-0-0-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-1-0-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-2-0-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-3-0-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp-0-0-0-thermal { + thermal-sensors = <&tsens2 5>; + + trips { + nsp-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp-0-1-0-thermal { + thermal-sensors = <&tsens2 6>; + + trips { + nsp-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp-0-2-0-thermal { + thermal-sensors = <&tsens2 7>; + + trips { + nsp-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddrss-0-thermal { + thermal-sensors = <&tsens2 8>; + + trips { + ddrss-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-1-0-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + cpuss1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss-3-thermal { + thermal-sensors = <&tsens3 0>; + + trips { + aoss3-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-0-1-thermal { + thermal-sensors = <&tsens3 1>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-1-1-thermal { + thermal-sensors = <&tsens3 2>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-2-1-thermal { + thermal-sensors = <&tsens3 3>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-3-1-thermal { + thermal-sensors = <&tsens3 4>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp-0-0-1-thermal { + thermal-sensors = <&tsens3 5>; + + trips { + nsp-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp-0-1-1-thermal { + thermal-sensors = <&tsens3 6>; + + trips { + nsp-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp-0-2-1-thermal { + thermal-sensors = <&tsens3 7>; + + trips { + nsp-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddrss-1-thermal { + thermal-sensors = <&tsens3 8>; + + trips { + ddrss-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-1-1-thermal { + thermal-sensors = <&tsens3 9>; + + trips { + cpuss1-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/qcom/msm8917.dtsi b/arch/arm64/boot/dts/qcom/msm8917.dtsi index 8a642fce2e40..6251189b8e6d 100644 --- a/arch/arm64/boot/dts/qcom/msm8917.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8917.dtsi @@ -996,7 +996,7 @@ clock-names = "iface", "bus", "vsync"; - + resets = <&gcc GCC_MDSS_BCR>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi index b93621080989..c94eb14e31bd 100644 --- a/arch/arm64/boot/dts/qcom/msm8937.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi @@ -1044,6 +1044,7 @@ clock-names = "iface", "bus", "vsync"; + resets = <&gcc GCC_MDSS_BCR>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts index ebb548e62e02..ea90b00a2c8a 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts @@ -20,6 +20,61 @@ serial0 = &blsp_uart2; }; + battery: battery { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + energy-full-design-microwatt-hours = <11500000>; + charge-full-design-microamp-hours = <3000000>; + + ocv-capacity-celsius = <(-20) 0 25 40 60>; + ocv-capacity-table-0 = <4378000 100>, <4220000 95>, <4125000 90>, + <4071000 85>, <3977000 80>, <3916000 75>, <3866000 70>, + <3838000 65>, <3822000 60>, <3809000 55>, <3797000 50>, + <3784000 45>, <3771000 40>, <3757000 35>, <3743000 30>, + <3726000 25>, <3707000 20>, <3688000 16>, <3670000 13>, + <3655000 11>, <3648000 10>, <3636000 9>, <3624000 8>, + <3612000 7>, <3592000 6>, <3569000 5>, <3540000 4>, + <3494000 3>, <3418000 2>, <3289000 1>, <3000000 0>; + + ocv-capacity-table-1 = <4378000 100>, <4292000 95>, <4226000 90>, + <4166000 85>, <4109000 80>, <4064000 75>, <3992000 70>, + <3942000 65>, <3898000 60>, <3859000 55>, <3826000 50>, + <3802000 45>, <3788000 40>, <3779000 35>, <3768000 30>, + <3752000 25>, <3732000 20>, <3712000 16>, <3696000 13>, + <3688000 11>, <3684000 10>, <3680000 9>, <3675000 8>, + <3669000 7>, <3658000 6>, <3636000 5>, <3599000 4>, + <3544000 3>, <3466000 2>, <3341000 1>, <3000000 0>; + + ocv-capacity-table-2 = <4372000 100>, <4306000 95>, <4247000 90>, + <4190000 85>, <4134000 80>, <4081000 75>, <4030000 70>, + <3984000 65>, <3930000 60>, <3884000 55>, <3850000 50>, + <3826000 45>, <3804000 40>, <3786000 35>, <3770000 30>, + <3753000 25>, <3734000 20>, <3712000 16>, <3693000 13>, + <3686000 11>, <3684000 10>, <3682000 9>, <3680000 8>, + <3676000 7>, <3668000 6>, <3643000 5>, <3600000 4>, + <3542000 3>, <3462000 2>, <3340000 1>, <3000000 0>; + + ocv-capacity-table-3 = <4365000 100>, <4304000 95>, <4246000 90>, + <4189000 85>, <4133000 80>, <4080000 75>, <4030000 70>, + <3985000 65>, <3933000 60>, <3886000 55>, <3852000 50>, + <3827000 45>, <3806000 40>, <3789000 35>, <3769000 30>, + <3746000 25>, <3726000 20>, <3706000 16>, <3688000 13>, + <3681000 11>, <3678000 10>, <3676000 9>, <3676000 8>, + <3672000 7>, <3660000 6>, <3634000 5>, <3588000 4>, + <3528000 3>, <3448000 2>, <3322000 1>, <3000000 0>; + + ocv-capacity-table-4 = <4358000 100>, <4298000 95>, <4240000 90>, + <4183000 85>, <4128000 80>, <4076000 75>, <4027000 70>, + <3983000 65>, <3935000 60>, <3887000 55>, <3852000 50>, + <3827000 45>, <3806000 40>, <3789000 35>, <3764000 30>, + <3738000 25>, <3715000 20>, <3695000 16>, <3677000 13>, + <3672000 11>, <3669000 10>, <3667000 9>, <3666000 8>, + <3662000 7>, <3652000 6>, <3622000 5>, <3577000 4>, + <3518000 3>, <3440000 2>, <3321000 1>, <3000000 0>; + }; + chosen { stdout-path = "serial0"; }; @@ -27,7 +82,7 @@ gpio-keys { compatible = "gpio-keys"; - pinctrl-0 = <&gpio_keys_default>; + pinctrl-0 = <&gpio_hall_sensor_default>, <&gpio_keys_default>; pinctrl-names = "default"; button-volume-up { @@ -43,6 +98,15 @@ linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <15>; }; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + debounce-interval = <150>; + }; }; reg_sd_vmmc: regulator-sdcard-vmmc { @@ -135,6 +199,12 @@ reg = <0x0 0x86800000 0x0 0x5500000>; }; +&pm8916_bms { + monitored-battery = <&battery>; + + status = "okay"; +}; + &pm8916_codec { qcom,micbias-lvl = <2800>; qcom,mbhc-vthreshold-low = <75 150 237 450 500>; @@ -240,6 +310,13 @@ bias-pull-up; }; + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi index adb96cd8d643..659d127b1bc3 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi @@ -11,6 +11,10 @@ #include "msm8939.dtsi" #include "pm8916.dtsi" +&camss { + vdda-supply = <&pm8916_l2>; +}; + &mdss_dsi0 { vdda-supply = <&pm8916_l2>; vddio-supply = <&pm8916_l6>; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index eb64ec35e7f0..d4d7b0c9206c 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -1436,6 +1436,145 @@ }; }; + camss: isp@1b0ac00 { + compatible = "qcom,msm8939-camss"; + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>, + <0x01b08800 0x100>, + <0x01b40000 0x200>; + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0", + "csid2", + "vfe0_vbif"; + + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>, + <&gcc GCC_CAMSS_CSI2_AHB_CLK>, + <&gcc GCC_CAMSS_CSI2_CLK>, + <&gcc GCC_CAMSS_CSI2PHY_CLK>, + <&gcc GCC_CAMSS_CSI2PIX_CLK>, + <&gcc GCC_CAMSS_CSI2RDI_CLK>; + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi"; + + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0", + "csid2"; + + iommus = <&apps_iommu 3>; + + power-domains = <&gcc VFE_GDSC>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + cci: cci@1b0c000 { + compatible = "qcom,msm8916-cci", "qcom,msm8226-cci"; + reg = <0x01b0c000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>; + clock-names = "camss_top_ahb", + "cci_ahb", + "cci", + "camss_ahb"; + assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>, + <&gcc GCC_CAMSS_CCI_CLK>; + assigned-clock-rates = <80000000>, + <19200000>; + pinctrl-0 = <&cci0_default>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gpu: gpu@1c00000 { compatible = "qcom,adreno-405.0", "qcom,adreno"; reg = <0x01c00000 0x10000>; @@ -1500,6 +1639,13 @@ #iommu-cells = <1>; qcom,iommu-secure-id = <17>; + /* vfe */ + iommu-ctx@3000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + }; + /* mdp_0: */ iommu-ctx@4000 { compatible = "qcom,msm-iommu-v1-ns"; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index b8f2a01bcb96..1e718accf8f5 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -24,7 +24,7 @@ chassis-type = "handset"; qcom,msm-id = <251 0>, <252 0>; - qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + qcom,pmic-id = <0x10009 0x1000a 0x0 0x0>; /* Bullhead firmware doesn't support PSCI */ /delete-node/ psci; diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 1aca11daf83c..7775532f154e 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -16,7 +16,7 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ qcom,msm-id = <207 0x20000>; - qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + qcom,pmic-id = <0x10009 0x1000a 0x0 0x0>; qcom,board-id = <8026 0>; aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 4c983b10dd92..7ace3540ef0a 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -378,7 +378,7 @@ status = "okay"; sideinteraction: touch@2c { - compatible = "ad,ad7147_captouch"; + compatible = "adi,ad7147_captouch"; reg = <0x2c>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/pm7550.dtsi b/arch/arm64/boot/dts/qcom/pm7550.dtsi new file mode 100644 index 000000000000..b886c2397fe7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm7550.dtsi @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm7550_thermal: pm7550-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm7550_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + /* + * Current Linux driver currently only supports up to + * 125°C, should be updated to 145°C once available. + */ + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pm7550: pmic@1 { + compatible = "qcom,pm7550", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm7550_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm7550_gpios: gpio@8800 { + compatible = "qcom,pm7550-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm7550_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm7550_flash: led-controller@ee00 { + compatible = "qcom,pm7550-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi index 6426b431616b..7b5898c263ad 100644 --- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi @@ -98,6 +98,8 @@ #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + pm8550vs_c_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; @@ -122,6 +124,8 @@ #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + pm8550vs_d_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; @@ -146,6 +150,8 @@ #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + pm8550vs_e_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; @@ -170,6 +176,8 @@ #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + pm8550vs_g_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; diff --git a/arch/arm64/boot/dts/qcom/pmiv0104.dtsi b/arch/arm64/boot/dts/qcom/pmiv0104.dtsi new file mode 100644 index 000000000000..85ee8911d93e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pmiv0104.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmiv0104-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmiv0104_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + /* + * Current Linux driver currently only supports up to + * 125°C, should be updated to 145°C once available. + */ + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmic@PMIV0104_SID { + compatible = "qcom,pmiv0104", "qcom,spmi-pmic"; + reg = <PMIV0104_SID SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmiv0104_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <PMIV0104_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmiv0104_gpios: gpio@8800 { + compatible = "qcom,pmiv0104-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmiv0104_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmiv0104_eusb2_repeater: phy@fd00 { + compatible = "qcom,pmiv0104-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index be67eb173046..5a24c19c415e 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -39,6 +39,20 @@ }; }; + dp0-connector { + compatible = "dp-connector"; + label = "DP0"; + type = "mini"; + + hpd-gpios = <&io_expander 8 GPIO_ACTIVE_HIGH>; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; + dp-dsi0-connector { compatible = "dp-connector"; label = "DSI0"; @@ -423,6 +437,15 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>; + remote-endpoint = <&dp0_connector_in>; +}; + &mdss_dsi0 { vdda-supply = <&vreg_l11a>; status = "okay"; @@ -624,6 +647,13 @@ status = "okay"; }; +&usb_qmpphy_2 { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l12a>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index f29a352b0288..e3d2f01881ae 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -262,6 +262,30 @@ }; }; + vdd_ntn_0p9: regulator-vdd-ntn-0p9 { + compatible = "regulator-fixed"; + regulator-name = "VDD_NTN_0P9"; + gpio = <&pm8350c_gpios 2 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <899400>; + regulator-max-microvolt = <899400>; + enable-active-high; + pinctrl-0 = <&ntn_0p9_en>; + pinctrl-names = "default"; + regulator-enable-ramp-delay = <4300>; + }; + + vdd_ntn_1p8: regulator-vdd-ntn-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VDD_NTN_1P8"; + gpio = <&pm8350c_gpios 3 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + pinctrl-0 = <&ntn_1p8_en>; + pinctrl-names = "default"; + regulator-enable-ramp-delay = <10000>; + }; + wcn6750-pmu { compatible = "qcom,wcn6750-pmu"; pinctrl-0 = <&bt_en>; @@ -803,6 +827,78 @@ status = "okay"; }; +&pcie1_port0 { + pcie@0,0 { + compatible = "pci1179,0623"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x2 0xff>; + + vddc-supply = <&vdd_ntn_0p9>; + vdd18-supply = <&vdd_ntn_1p8>; + vdd09-supply = <&vdd_ntn_0p9>; + vddio1-supply = <&vdd_ntn_1p8>; + vddio2-supply = <&vdd_ntn_1p8>; + vddio18-supply = <&vdd_ntn_1p8>; + + i2c-parent = <&i2c0 0x77>; + + resx-gpios = <&pm8350c_gpios 1 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&tc9563_resx_n>; + pinctrl-names = "default"; + + pcie@1,0 { + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x3 0xff>; + }; + + pcie@2,0 { + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + + device_type = "pci"; + ranges; + bus-range = <0x4 0xff>; + }; + + pcie@3,0 { + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x5 0xff>; + + pci@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + + pci@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + }; + }; + }; +}; + &pm7325_gpios { kypd_vol_up_n: kypd-vol-up-n-state { pins = "gpio6"; @@ -1081,6 +1177,38 @@ }; }; +&pm8350c_gpios { + ntn_0p9_en: ntn-0p9-en-state { + pins = "gpio2"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; + + ntn_1p8_en: ntn-1p8-en-state { + pins = "gpio3"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; + + tc9563_resx_n: tc9563-resx-state { + pins = "gpio1"; + function = "normal"; + + bias-disable; + input-disable; + output-enable; + power-source = <0>; + }; +}; + &tlmm { gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */ diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts new file mode 100644 index 000000000000..0b64a0b91202 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts @@ -0,0 +1,1410 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025, Thundercomm All rights reserved. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "kodiak.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mpss_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &remoteproc_wpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; +/delete-node/ &wifi; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wlan_fw_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Thundercomm RUBIK Pi 3"; + compatible = "thundercomm,rubikpi3", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + linux,can-disable; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu_in: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + + /* cooling level (0, 1, 2, 3) : (0% duty, 25% duty, 50% duty, 100% duty) */ + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + pwms = <&pm8350c_pwm 3 1000000>; + + pinctrl-0 = <&fan_pwm_out_default>; + pinctrl-names = "default"; + }; + + vreg_eth_1v8: regulator-eth-1v8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_eth_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb_eth_power>; + pinctrl-names = "default"; + + vin-supply = <&vreg_usbhub_pwr_1v8>; + }; + + vreg_lt9611_3v3: regulator-lt9611-3v3 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_lt9611_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <<9611_vcc_pin>; + pinctrl-names = "default"; + }; + + vreg_m2_1v8: regulator-m2-1v8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_m2_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&m2_vcc_pin>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_usbhub_pwr_1v8: regulator-usbhub-pwr-1v8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_usbhub_pwr_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usbhub_power>; + pinctrl-names = "default"; + + regulator-always-on; + }; + + vreg_usbhub_rest_1v8: regulator-usbhub-rest-1v8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_usbhub_rest_1v8"; + regulator-min-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 136 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usbhub_rest>; + pinctrl-names = "default"; + + vin-supply = <&vreg_eth_1v8>; + + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_wifi_1v8: regulator-wifi-1v8 { + compatible = "regulator-fixed"; + + regulator-name = "vreg_wifi_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <50000>; + + gpio = <&tlmm 125 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wifi_reset_active>, + <&wifi_host_wake>, + <&wifi_power_on>; + pinctrl-names = "default"; + + regulator-always-on; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + thermal-zones { + quiet-thermal { + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&usb1_sbu_default>; + pinctrl-names = "default"; + + mode-switch; + orientation-switch; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu_in>; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l3-supply = <&vreg_s2b_0p876>; + vdd-l5-supply = <&vreg_s2b_0p876>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; + vdd-l8-supply = <&vreg_s7b_0p972>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; + vdd-l13-supply = <&vreg_s7b_0p972>; + vdd-l14-l16-supply = <&vreg_s8b_1p272>; + + vreg_s1b_1p872: smps1 { + regulator-name = "vreg_s1b_1p872"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s2b_0p876: smps2 { + regulator-name = "vreg_s2b_0p876"; + regulator-min-microvolt = <570070>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-name = "vreg_s7b_0p972"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-name = "vreg_s8b_1p272"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p504: ldo3 { + regulator-name = "vreg_l3b_0p504"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_0p752: ldo4 { + regulator-name = "vreg_l4b_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <820000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + reg_l5b_0p752: ldo5 { + regulator-name = "reg_l5b_0p752"; + regulator-min-microvolt = <552000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p952: ldo7 { + regulator-name = "vreg_l7b_2p952"; + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p904: ldo8 { + regulator-name = "vreg_l8b_0p904"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p504: ldo11 { + regulator-name = "vreg_l11b_1p504"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p751: ldo12 { + regulator-name = "vreg_l12b_0p751"; + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p53: ldo13 { + regulator-name = "vreg_l13b_0p53"; + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p08: ldo14 { + regulator-name = "vreg_l14b_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p765: ldo15 { + regulator-name = "vreg_l15b_0p765"; + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p1: ldo16 { + regulator-name = "vreg_l16b_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p7: ldo17 { + regulator-name = "vreg_l17b_1p7"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p872>; + vdd-l2-l8-supply = <&vreg_s1b_1p872>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p972>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_2p19: smps1 { + regulator-name = "vreg_s1c_2p19"; + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s2c_0p752: smps2 { + regulator-name = "vreg_s2c_0p752"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s5c_0p752: smps5 { + regulator-name = "vreg_s5c_0p752"; + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7c_0p752: smps7 { + regulator-name = "vreg_s7c_0p752"; + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-name = "vreg_s9c_1p084"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p62: ldo2 { + regulator-name = "vreg_l2c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_2p8: ldo3 { + regulator-name = "vreg_l3c_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p62: ldo4 { + regulator-name = "vreg_l4c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p62: ldo5 { + regulator-name = "vreg_l5c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p62: ldo8 { + regulator-name = "vreg_l8c_1p62"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-name = "vreg_l11c_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p65: ldo12 { + regulator-name = "vreg_l12c_1p65"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p7: ldo13 { + regulator-name = "vreg_l13c_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gcc { + protected-clocks = <GCC_CFG_NOC_LPASS_CLK>, + <GCC_MSS_CFG_AHB_CLK>, + <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, + <GCC_MSS_OFFLINE_AXI_CLK>, + <GCC_MSS_Q6SS_BOOT_CLK_SRC>, + <GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <GCC_MSS_SNOC_AXI_CLK>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_SEC_CTRL_CLK_SRC>, + <GCC_WPSS_AHB_BDG_MST_CLK>, + <GCC_WPSS_AHB_CLK>, + <GCC_WPSS_RSCP_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs6490/a660_zap.mbn"; +}; + +/* Pin 3, 5 in 40-pin connector */ +&i2c1 { + status = "okay"; +}; + +&i2c9 { + clock-frequency = <400000>; + + status = "okay"; + + lt9611_codec: hdmi-bridge@39 { + compatible = "lontium,lt9611"; + reg = <0x39>; + + interrupts-extended = <&tlmm 20 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_lt9611_3v3>; + vcc-supply = <&vreg_lt9611_3v3>; + + pinctrl-0 = <<9611_irq_pin>, + <<9611_rst_pin>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie0_clkreq_n>, + <&pcie0_reset_n>, + <&pcie0_wake_n>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_clkreq_n>, + <&pcie1_reset_n>, + <&pcie1_wake_n>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pm7325_gpios { + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm7325_temp_alarm { + io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8350c_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pmk8350_rtc { + allow-set-time; + + status = "okay"; +}; + +&pmk8350_vadc { + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + label = "xo_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@103 { + reg = <PM7325_ADC7_DIE_TEMP>; + label = "pm7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/Thundercomm/RubikPi3/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + + status = "okay"; +}; + +/* WIFI part of the AP6256 connected with SDIO */ +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + non-removable; + keep-power-in-suspend; + /delete-property/ cd-gpios; + + status = "okay"; +}; + +/* Pin 19, 21, 23, 24 in 40-pin connector */ +&spi12 { + status = "okay"; +}; + +&thermal_zones { + cpu0-thermal { + trips { + cpu_tepid: cpu-tepid { + temperature = <65000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_warm: cpu-warm { + temperature = <80000>; + hysteresis = <5000>; + type = "active"; + }; + }; + + cooling-maps { + map-cpu-tepid { + cooling-device = <&fan0 1 1>; + trip = <&cpu_tepid>; + }; + + map-cpu-warm { + cooling-device = <&fan0 2 2>; + trip = <&cpu_warm>; + }; + + map-cpu-hot { + cooling-device = <&fan0 3 3>; + trip = <&cpu0_alert0>; + }; + }; + }; +}; + +/* Pin 8, 10 in 40-pin connector */ +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +/* BT part of the AP6256 connected with UART */ +&uart7 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-1 = <&qup_uart7_sleep_cts>, + <&qup_uart7_sleep_rts>, + <&qup_uart7_sleep_tx>, + <&qup_uart7_sleep_rx>; + pinctrl-names = "default", + "sleep"; + + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&sleep_clk>; + clock-names = "lpo"; + device-wakeup-gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&tlmm 137 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&bt_device_wake>, + <&bt_host_wake>, + <&bt_reset>; + pinctrl-names = "default"; + vbat-supply = <&vreg_wifi_1v8>; + vddio-supply = <&vreg_wifi_1v8>; + max-speed = <3000000>; + }; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&usb_2 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda18-supply = <&vreg_l1c_1p8>; + vdda33-supply = <&vreg_l2b_3p072>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p952>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&venus { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in kodiak.dtsi */ +&pcie0_clkreq_n { + bias-pull-up; + drive-strength = <8>; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <8>; +}; + +&pm8350c_gpios { + fan_pwm_out_default: fan-pwm-out-default-state { + pins = "gpio8"; + function = "func1"; + power-source = <1>; + drive-push-pull; + output-high; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + bias-disable; + drive-strength = <2>; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + bias-disable; + drive-strength = <2>; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +&tlmm { + pcie1_reset_n: pcie1-reset-n-state { + pins = "gpio2"; + function = "gpio"; + drive-strength = <8>; + output-low; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + usb_eth_power: usb-eth-power-state { + pins = "gpio7"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + wifi_reset_active: wifi-reset-active-state { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + output-high; + bias-disable; + }; + + bt_reset: bt-reset-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <8>; + output-high; + input-disable; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + wifi_host_wake: wifi-host-wake-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + bt_device_wake: bt-device-wake-state { + pins = "gpio39"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + usb1_sbu_default: usb1-sbu-state { + sel-pins { + pins = "gpio52"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + oe-n-pins { + pins = "gpio53"; + function = "gpio"; + drive-strength = <8>; + output-high; + bias-disable; + }; + }; + + m2_vcc_pin: m2-vcc-state { + pins = "gpio56"; + function = "gpio"; + drive-strength = <8>; + output-high; + input-disable; + }; + + lt9611_vcc_pin: lt9611-vcc-pin-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + output-high; + input-disable; + }; + + usbhub_power: usbhub-power-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + pcie0_reset_n: pcie0-reset-n-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + pcie0_wake_n: pcie0-wake-n-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + wifi_power_on: wifi-power-on-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + usbhub_rest: usbhub-reset-state { + pins = "gpio136"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + bt_host_wake: bt-host-wake-state { + pins = "gpio137"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index 9bcb869dd270..c04e0ad53eec 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -24,6 +24,18 @@ stdout-path = "serial0:115200n8"; }; + dp0-connector { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; + regulator-usb2-vbus { compatible = "regulator-fixed"; regulator-name = "USB2_VBUS"; @@ -317,6 +329,68 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp0_connector_in>; +}; + +&mdss_dp0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&pcie0 { + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcieport0 { + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcieport1 { + reset-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l6a>; + vdda-pll-supply = <&vreg_l5a>; + + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -362,6 +436,29 @@ }; &tlmm { + pcie0_default_state: pcie0-default-state { + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + ethernet0_default: ethernet0-default-state { ethernet0_mdc: ethernet0-mdc-pins { pins = "gpio5"; @@ -377,6 +474,35 @@ bias-pull-up; }; }; + + pcie1_default_state: pcie1-default-state { + wake-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + clkreq-pins { + pins = "gpio22"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio94"; + function = "edp0_hot"; + bias-disable; + }; }; &uart7 { diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi index e6ac529e6b72..e6ebb643203b 100644 --- a/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300.dtsi @@ -366,6 +366,22 @@ vdd3-supply = <&vreg_l5b_3p1>; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &sleep_clk { clock-frequency = <32764>; }; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index 846e5e5899aa..cdfe40da5d33 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -1592,7 +1592,7 @@ gem_noc: interconnect@19100000 { compatible = "qcom,qdu1000-gem-noc"; - reg = <0x0 0x19100000 0x0 0xB8080>; + reg = <0x0 0x19100000 0x0 0xb8080>; qcom,bcm-voters = <&apps_bcm_voter>; #interconnect-cells = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts new file mode 100644 index 000000000000..197ab6eb1666 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts @@ -0,0 +1,459 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2025, Arduino SRL + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "agatti.dtsi" +#include "pm4125.dtsi" + +/delete-node/ &cont_splash_memory; + +/ { + model = "Arduino UnoQ"; + compatible = "arduino,imola", "qcom,qrb2210", "qcom,qcm2290"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart4; + serial1 = &uart2; + serial2 = &uart3; + sdhc1 = &sdhc_1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + pinctrl-0 = <&key_volp_n>, <&key_vold_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led-bt { + label = "unoq:bt-blue2"; + function = LED_FUNCTION_BLUETOOTH; + color = <LED_COLOR_ID_BLUE>; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + + led-panic { + label = "unoq:panic-red2"; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led-wlan { + label = "unoq:wlan-green2"; + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + ledb: led-user-blue { + label = "unoq:user-blue1"; + gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_BLUE>; + }; + + ledg: led-user-green { + label = "unoq:user-green1"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + ledr: led-user-red { + label = "unoq:user-red1"; + gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + }; + }; + + multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_INDICATOR; + leds = <&ledr>, <&ledg>, <&ledb>; + }; + + /* PM4125 charger out, supplied by VBAT */ + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; +}; + +&i2c0 { + clock-frequency = <100000>; + + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + + status = "okay"; +}; + +&pm4125_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <500000>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcm2290/adsp.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm2290/modem.mbn"; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm2250-regulators"; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm4125_s3>; + vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>; + vdd_l13_l14_l15_l16-supply = <&pm4125_s4>; + + pm4125_s3: s3 { + /* 0.4V-1.6625V -> 1.3V (Power tree requirements) */ + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-boot-on; + }; + + pm4125_s4: s4 { + /* 1.2V-2.35V -> 2.05V (Power tree requirements) */ + regulator-min-microvolt = <2072000>; + regulator-max-microvolt = <2072000>; + regulator-boot-on; + }; + + pm4125_l2: l2 { + /* LPDDR4X VDD2 */ + regulator-min-microvolt = <1136000>; + regulator-max-microvolt = <1136000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l3: l3 { + /* LPDDR4X VDDQ */ + regulator-min-microvolt = <616000>; + regulator-max-microvolt = <616000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l4: l4 { + /* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2700000>; + regulator-allow-set-load; + }; + + pm4125_l5: l5 { + /* CSI/DSI */ + regulator-min-microvolt = <1232000>; + regulator-max-microvolt = <1232000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l6: l6 { + /* DRAM PLL */ + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l7: l7 { + /* Wi-Fi CX */ + regulator-min-microvolt = <664000>; + regulator-max-microvolt = <664000>; + }; + + pm4125_l10: l10 { + /* Wi-Fi RFA */ + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + pm4125_l11: l11 { + /* ANX7625 DVDD1P0V/AVDD1P0V */ + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + pm4125_l12: l12 { + /* USB PHYs */ + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <928000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l13: l13 { + /* USB/QFPROM/PLLs */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l14: l14 { + /* SDHCI1 EMMC VCCQ */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + /* Broken hardware, never turn it off! */ + regulator-always-on; + }; + + pm4125_l15: l15 { + /* VDDIO */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-boot-on; + }; + + pm4125_l20: l20 { + /* SDHCI1 EMMC */ + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + regulator-allow-set-load; + }; + + pm4125_l21: l21 { + /* USB HS */ + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3300000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm4125_l22: l22 { + /* Wi-Fi VDD */ + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm4125_l20>; + vqmmc-supply = <&pm4125_l14>; + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + non-removable; + supports-cqe; + no-sdio; + no-sd; + + status = "okay"; +}; + +&spi5 { + status = "okay"; + + spidev@0 { + reg = <0>; + compatible = "arduino,unoq-mcu"; + pinctrl-0 = <&spidev_cs>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + spidev_cs: spidev-cs-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + }; + + jmisc_gpio18: jmisc-gpio18-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio28: jmisc-gpio28-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + key_vold_n: key-vold-n-state { + pins = "gpio36"; + function = "gpio"; + bias-pull-up; + output-disable; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; + + jmisc_gpio98: jmisc-gpio98-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio99: jmisc-gpio99-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio100: jmisc-gpio100-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + jmisc_gpio101: jmisc-gpio101-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart2 { + status = "okay"; +}; + +/* UART connected to Bluetooth */ +&uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&pm4125_l15>; + vddxo-supply = <&pm4125_l13>; + vddrf-supply = <&pm4125_l10>; + vddch0-supply = <&pm4125_l22>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; +}; + +/* UART exposed in JCTL */ +&uart4 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_hsphy { + vdd-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + vdda-phy-dpdm-supply = <&pm4125_l21>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&pm4125_l12>; + vdda-pll-supply = <&pm4125_l13>; + + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pm4125_l7>; + vdd-1.8-xo-supply = <&pm4125_l13>; + vdd-1.3-rfa-supply = <&pm4125_l10>; + vdd-3.3-ch0-supply = <&pm4125_l22>; + qcom,ath10k-calibration-variant = "ArduinoImola"; + firmware-name = "qcm2290"; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qrb2210-rb1-vision-mezzanine.dtso new file mode 100644 index 000000000000..c314cd6dd484 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1-vision-mezzanine.dtso @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/qcom,gcc-qcm2290.h> +#include <dt-bindings/gpio/gpio.h> + +&pm8008 { + status = "okay"; +}; + +&camss { + status = "okay"; + + vdd-csiphy-1p2-supply = <&pm4125_l5>; + vdd-csiphy-1p8-supply = <&pm4125_l13>; + + ports { + port@0 { + csiphy0_ep: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&ov9282_ep>; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + /* Vision Mezzanine DIP3-1 must be ON (Selects camera CAM0A&B) */ + camera@60 { + compatible = "ovti,ov9282"; + reg = <0x60>; + + /* Reset is active-low, but driver applies inverted reset logic */ + reset-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mclk3_default>; + pinctrl-names = "default"; + + clocks = <&gcc GCC_CAMSS_MCLK3_CLK>; + assigned-clocks = <&gcc GCC_CAMSS_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + + avdd-supply = <&vreg_l3p>; + dvdd-supply = <&vreg_l1p>; + dovdd-supply = <&vreg_l7p>; + + port { + ov9282_ep: endpoint { + link-frequencies = /bits/ 64 <400000000>; + data-lanes = <1 2>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 1b9ca957a94b..9814ac4896c5 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -267,6 +267,81 @@ firmware-name = "qcom/qcm2290/a702_zap.mbn"; }; +&i2c1 { + clock-frequency = <400000>; + + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupts-extended = <&tlmm 25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&pm4125_s3>; + vdd-l3-l4-supply = <&vph_pwr>; + vdd-l5-supply = <&vph_pwr>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-supply = <&vph_pwr>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + status = "disabled"; + + regulators { + vreg_l1p: ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l2p: ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3p: ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l4p: ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3404000>; + }; + + vreg_l5p: ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l6p: ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l7p: ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + &i2c2_gpio { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 0cd36c54632f..5f8613150bdd 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -694,7 +694,7 @@ &uart3 { interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + <&tlmm 11 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&uart3_default>; pinctrl-1 = <&uart3_sleep>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 84c6d662b54f..617a39d32488 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -67,6 +67,11 @@ status = "okay"; }; +&lpass_tlmm { + /delete-property/ clocks; + /delete-property/ clock-names; +}; + &lpasscc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 5334adebf278..4b9cd9aea0be 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -3041,8 +3041,8 @@ qcom,dout-ports = <5>; qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff>; qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff>; qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 8b1a45a4e56e..4a72e0718fe4 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -262,7 +262,7 @@ pwr_cluster_sleep_0: cluster-sleep-0-0 { compatible = "arm,idle-state"; idle-state-name = "pwr-cluster-dynamic-retention"; - arm,psci-suspend-param = <0x400000F2>; + arm,psci-suspend-param = <0x400000f2>; entry-latency-us = <284>; exit-latency-us = <384>; min-residency-us = <9987>; @@ -272,7 +272,7 @@ pwr_cluster_sleep_1: cluster-sleep-0-1 { compatible = "arm,idle-state"; idle-state-name = "pwr-cluster-retention"; - arm,psci-suspend-param = <0x400000F3>; + arm,psci-suspend-param = <0x400000f3>; entry-latency-us = <338>; exit-latency-us = <423>; min-residency-us = <9987>; @@ -282,7 +282,7 @@ pwr_cluster_sleep_2: cluster-sleep-0-2 { compatible = "arm,idle-state"; idle-state-name = "pwr-cluster-retention"; - arm,psci-suspend-param = <0x400000F4>; + arm,psci-suspend-param = <0x400000f4>; entry-latency-us = <515>; exit-latency-us = <1821>; min-residency-us = <9987>; @@ -292,7 +292,7 @@ perf_cluster_sleep_0: cluster-sleep-1-0 { compatible = "arm,idle-state"; idle-state-name = "perf-cluster-dynamic-retention"; - arm,psci-suspend-param = <0x400000F2>; + arm,psci-suspend-param = <0x400000f2>; entry-latency-us = <272>; exit-latency-us = <329>; min-residency-us = <9987>; @@ -302,7 +302,7 @@ perf_cluster_sleep_1: cluster-sleep-1-1 { compatible = "arm,idle-state"; idle-state-name = "perf-cluster-retention"; - arm,psci-suspend-param = <0x400000F3>; + arm,psci-suspend-param = <0x400000f3>; entry-latency-us = <332>; exit-latency-us = <368>; min-residency-us = <9987>; @@ -312,7 +312,7 @@ perf_cluster_sleep_2: cluster-sleep-1-2 { compatible = "arm,idle-state"; idle-state-name = "perf-cluster-retention"; - arm,psci-suspend-param = <0x400000F4>; + arm,psci-suspend-param = <0x400000f4>; entry-latency-us = <545>; exit-latency-us = <1609>; min-residency-us = <9987>; @@ -563,7 +563,7 @@ }; }; - soc@0 { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -598,8 +598,8 @@ }; gpu_speed_bin: gpu-speed-bin@41a0 { - reg = <0x41a2 0x1>; - bits = <5 7>; + reg = <0x41a2 0x2>; + bits = <5 8>; }; }; @@ -1217,6 +1217,11 @@ reg = <0x05100000 0x40000>; #iommu-cells = <1>; + clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; + clock-names = "bus"; + + power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; + #global-interrupts = <2>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, @@ -1563,6 +1568,7 @@ reg-names = "mdss_phys", "vbif_phys"; power-domains = <&mmcc MDSS_GDSC>; + resets = <&mmcc MDSS_BCR>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, @@ -2263,6 +2269,79 @@ status = "disabled"; }; + lpi_tlmm: pinctrl@15070000 { + compatible = "qcom,sdm660-lpass-lpi-pinctrl"; + reg = <0x15070000 0x20000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 32>; + + cdc_pdm_default: cdc-pdm-default-state { + clk-pins { + pins = "gpio18"; + function = "pdm_clk"; + drive-strength = <8>; + output-high; + }; + + sync-pins { + pins = "gpio19"; + function = "pdm_sync"; + drive-strength = <4>; + output-high; + }; + + tx-pins { + pins = "gpio20"; + function = "pdm_tx"; + drive-strength = <8>; + }; + + rx-pins { + pins = "gpio21", "gpio23", "gpio25"; + function = "pdm_rx"; + drive-strength = <4>; + output-high; + }; + }; + + cdc_comp_default: cdc-comp-default-state { + pins = "gpio22", "gpio24"; + function = "comp_rx"; + drive-strength = <8>; + }; + + cdc_dmic_default: cdc-dmic-default-state { + dmic1-clk-pins { + pins = "gpio26"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + dmic1-data-pins { + pins = "gpio27"; + function = "dmic1_data"; + drive-strength = <8>; + output-high; + }; + + dmic2-clk-pins { + pins = "gpio28"; + function = "dmic2_clk"; + drive-strength = <8>; + input-enable; + }; + + dmic2-data-pins { + pins = "gpio29"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + }; + adsp_pil: remoteproc@15700000 { compatible = "qcom,sdm660-adsp-pas"; reg = <0x15700000 0x4040>; @@ -2337,6 +2416,39 @@ }; }; }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&lpass_smmu 3>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&lpass_smmu 7>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&lpass_smmu 8>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&lpass_smmu 9>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm636.dtsi b/arch/arm64/boot/dts/qcom/sdm636.dtsi index ae15d81fa3f9..38e6e3bfc3ce 100644 --- a/arch/arm64/boot/dts/qcom/sdm636.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm636.dtsi @@ -7,15 +7,20 @@ #include "sdm660.dtsi" -/* - * According to the downstream DTS, - * 636 is basically a 660 except for - * different CPU frequencies, Adreno - * 509 instead of 512 and lack of - * turing IP. These differences will - * be addressed when the aforementioned - * peripherals will be enabled upstream. - */ +/delete-node/ &remoteproc_cdsp; +/delete-node/ &cdsp_smmu; +/delete-node/ &cdsp_region; + +/ { + /delete-node/ smp2p-cdsp; + + reserved-memory { + buffer_mem: tzbuffer@94a00000 { + reg = <0x0 0x94a00000 0x00 0x100000>; + no-map; + }; + }; +}; &adreno_gpu { compatible = "qcom,adreno-509.0", "qcom,adreno"; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index ef4a563c0feb..c252f248ef15 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -9,6 +9,37 @@ #include "sdm630.dtsi" +/delete-node/ &buffer_mem; + +/ { + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts = <GIC_SPI 514 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 30>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + reserved-memory { + cdsp_region: cdsp@94a00000 { + reg = <0x0 0x94a00000 0x00 0x600000>; + no-map; + }; + }; +}; + &adreno_gpu { compatible = "qcom,adreno-512.0", "qcom,adreno"; operating-points-v2 = <&gpu_sdm660_opp_table>; @@ -247,6 +278,136 @@ <0>; }; +&soc { + cdsp_smmu: iommu@5180000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x5180000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_HLOS1_VOTE_TURING_ADSP_SMMU_CLK>; + clock-names = "bus"; + + power-domains = <&gcc HLOS1_VOTE_TURING_ADSP_GDSC>; + + }; + + remoteproc_cdsp: remoteproc@1a300000 { + compatible = "qcom,sdm660-cdsp-pas"; + reg = <0x1a300000 0x00100>; + interrupts-extended = <&intc GIC_SPI 518 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&cdsp_region>; + power-domains = <&rpmpd SDM660_VDDCX>; + power-domain-names = "cx"; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 513 IRQ_TYPE_EDGE_RISING>; + + label = "cdsp"; + mboxes = <&apcs_glb 29>; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&cdsp_smmu 3>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&cdsp_smmu 4>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&cdsp_smmu 5>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&cdsp_smmu 6>; + }; + + compute-cb@9 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <9>; + iommus = <&cdsp_smmu 7>; + }; + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&cdsp_smmu 8>; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&cdsp_smmu 9>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&cdsp_smmu 10>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&cdsp_smmu 11>; + }; + }; + }; + }; +}; + &tlmm { compatible = "qcom,sdm660-pinctrl"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index b8a8dcbdfbe3..746e9deba526 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -634,7 +634,7 @@ #address-cells = <1>; #size-cells = <1>; - gpu_speed_bin: gpu_speed_bin@1a2 { + gpu_speed_bin: gpu-speed-bin@1a2 { reg = <0x1a2 0x2>; bits = <5 8>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index ce23f87e0316..5118b776a9bb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -379,6 +379,12 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; @@ -850,7 +856,6 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&qup_spi0_default>; - cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; can@0 { compatible = "microchip,mcp2517fd"; @@ -1156,6 +1161,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; qcom,calibration-variant = "Thundercomm_DB845C"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts b/arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts new file mode 100644 index 000000000000..fa89be500fb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-google-blueline.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "sdm845-google-common.dtsi" + +/ { + model = "Google Pixel 3"; + compatible = "google,blueline", "qcom,sdm845"; +}; + +&battery { + charge-full-design-microamp-hours = <2970000>; + voltage-min-design-microvolt = <3600000>; + voltage-max-design-microvolt = <4400000>; +}; + +&framebuffer0 { + width = <1080>; + height = <2160>; + stride = <(1080 * 4)>; +}; + +&i2c2 { + clock-frequency = <1000000>; + + status = "okay"; + + /* ST,FTS @ 49 */ +}; + +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + status = "okay"; + + panel@0 { + compatible = "lg,sw43408-lh546wf1-ed01", "lg,sw43408"; + reg = <0>; + + vddi-supply = <&vreg_l14a_1p8>; + vpnl-supply = <&vreg_l28a_3p0>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&panel_default>; + pinctrl-names = "default"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&panel_in>; + qcom,te-source = "mdp_vsync_e"; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + + status = "okay"; +}; + +&tlmm { + panel_default: panel-default-state { + reset-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + te-pins { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; + +&wifi { + qcom,calibration-variant = "Google_blueline"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi new file mode 100644 index 000000000000..fd9788d5c3f5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi @@ -0,0 +1,536 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &mpss_region; +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &mba_region; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &rmtfs_mem; + +/ { + chassis-type = "handset"; + qcom,board-id = <0x00021505 0>; + qcom,msm-id = <QCOM_ID_SDM845 0x20001>; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + battery: battery { + compatible = "simple-battery"; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0:115200n8"; + + /* Use display framebuffer as setup by bootloader */ + framebuffer0: framebuffer-0 { + compatible = "simple-framebuffer"; + memory-region = <&cont_splash_mem>; + + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + cont_splash_mem: splash@9d400000 { + reg = <0 0x9d400000 0 0x02400000>; + no-map; + }; + + mpss_region: memory@8e000000 { + reg = <0 0x8e000000 0 0x9800000>; + no-map; + }; + + venus_mem: venus@97800000 { + reg = <0 0x97800000 0 0x500000>; + no-map; + }; + + cdsp_mem: cdsp-mem@97D00000 { + reg = <0 0x97D00000 0 0x800000>; + no-map; + }; + + mba_region: mba@98500000 { + reg = <0 0x98500000 0 0x200000>; + no-map; + }; + + slpi_mem: slpi@98700000 { + reg = <0 0x98700000 0 0x1400000>; + no-map; + }; + + spss_mem: spss@99B00000 { + reg = <0 0x99B00000 0 0x100000>; + no-map; + }; + + rmtfs_mem: rmtfs-region@f2700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf2700000 0 0x202000>; + qcom,use-guard-pages; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume keys"; + autorepeat; + + pinctrl-0 = <&volume_up_gpio>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: regulator-vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm845/Google/blueline/adsp.mbn"; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + /* + * We can't properly bring the panel back if it gets turned off + * so keep it's regulators always on for now. + */ + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19a_3p3: ldo19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * The touchscreen needs this to be 3.3v, which is apparently + * quite close to the hardware limit for this LDO (3.312v) + * It must be kept in high power mode to prevent TS brownouts + */ + regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_mipi_dsi0_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + regulator-boot-on; + /* + * We can't properly bring the panel back if it gets turned off + * so keep it's regulators always on for now. + */ + regulator-always-on; + }; + }; + + regulators-1 { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; + + regulators-2 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c1 { + /* actuator @0c */ + + /* front camera, imx355 @1a */ + + /* eeprom @50, at24 driver says 8K */ +}; + +&cdsp_pas { + firmware-name = "qcom/sdm845/Google/blueline/cdsp.mbn"; + + status = "okay"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm845/Google/blueline/a630_zap.mbn"; +}; + +&i2c12 { + /* Bottom spkr (right) CS35L36 @ 40 */ + + /* Top spkr (left) CS35L36 @ 41 */ +}; + +&ipa { + firmware-name = "qcom/sdm845/Google/blueline/ipa_fws.mbn"; + memory-region = <&ipa_fw_mem>; + + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm845/Google/blueline/mba.mbn", + "qcom/sdm845/Google/blueline/modem.mbn"; + + status = "okay"; +}; + +&pm8998_gpios { + volume_up_gpio: vol-up-active-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; +}; + +&pm8998_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pmi8998_charger { + monitored-battery = <&battery>; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qup_uart9_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart9_tx { + drive-strength = <2>; + bias-disable; +}; + +&tlmm { + gpio-reserved-ranges = < 0 4>, /* SPI (Intel MNH Pixel Visual Core) */ + <81 4>; /* SPI (most likely Fingerprint Cards FPC1075) */ + + touchscreen_reset: ts-reset-state { + pins = "gpio99"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + touchscreen_pins: ts-pins-gpio-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_i2c_pins: qup-i2c2-gpio-state { + pins = "gpio27", "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart6 { + pinctrl-0 = <&qup_uart6_4pin>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm845/Google/blueline/venus.mbn"; + + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-crosshatch.dts b/arch/arm64/boot/dts/qcom/sdm845-google-crosshatch.dts new file mode 100644 index 000000000000..2a81ca1d00b1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-google-crosshatch.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "sdm845-google-common.dtsi" + +/ { + model = "Google Pixel 3 XL"; + compatible = "google,crosshatch", "qcom,sdm845"; +}; + +&battery { + charge-full-design-microamp-hours = <3480000>; + voltage-min-design-microvolt = <3600000>; + voltage-max-design-microvolt = <4400000>; +}; + +&dispcc { + /* Disable for now so simple-framebuffer continues working */ + status = "disabled"; +}; + +&framebuffer0 { + width = <1440>; + height = <2960>; + stride = <(1440 * 4)>; +}; + +&mdss { + /* Disable for now so simple-framebuffer continues working */ + status = "disabled"; +}; + +&wifi { + qcom,calibration-variant = "Google_crosshatch"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index db6dd04c51bb..5b121ea5520f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -31,7 +31,20 @@ }; chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + stdout-path = "serial0:115200n8"; + + framebuffer: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + memory-region = <&cont_splash_mem>; + + format = "a8r8g8b8"; + stride = <(1080 * 4)>; + width = <1080>; + }; }; gpio-hall-sensor { @@ -75,6 +88,11 @@ }; reserved-memory { + cont_splash_mem: splash@9d400000 { + reg = <0 0x9d400000 0 0x02400000>; + no-map; + }; + /* * The rmtfs memory region in downstream is 'dynamically allocated' * but given the same address every time. Hard code it as this address is @@ -148,7 +166,6 @@ gpio = <&tlmm 88 0>; enable-active-high; - regulator-boot-on; }; panel_vci_3v3: panel-vci-3v3-regulator { @@ -181,8 +198,9 @@ }; &adsp_pas { + firmware-name = "qcom/sdm845/OnePlus/enchilada/adsp.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; }; &apps_rsc { @@ -273,7 +291,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; + regulator-boot-on; }; vreg_l17a_1p3: ldo17 { @@ -353,8 +371,9 @@ }; &cdsp_pas { + firmware-name = "qcom/sdm845/OnePlus/enchilada/cdsp.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; }; &gcc { @@ -370,7 +389,7 @@ }; &gpu_zap_shader { - firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; + firmware-name = "qcom/sdm845/OnePlus/enchilada/a630_zap.mbn"; }; &i2c10 { @@ -422,7 +441,8 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn"; + firmware-name = "qcom/sdm845/OnePlus/enchilada/ipa_fws.mbn"; + status = "okay"; }; @@ -474,8 +494,10 @@ /* Modem/wifi */ &mss_pil { + firmware-name = "qcom/sdm845/OnePlus/enchilada/mba.mbn", + "qcom/sdm845/OnePlus/enchilada/modem.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; }; &pm8998_gpios { @@ -593,7 +615,8 @@ }; &slpi_pas { - firmware-name = "qcom/sdm845/oneplus6/slpi.mbn"; + firmware-name = "qcom/sdm845/OnePlus/enchilada/slpi.mbn"; + status = "okay"; }; @@ -744,7 +767,7 @@ * This path is relative to the qca/ * subdir under lib/firmware. */ - firmware-name = "oneplus6/crnv21.bin"; + firmware-name = "OnePlus/enchilada/crnv21.bin"; vddio-supply = <&vreg_s4a_1p8>; vddxo-supply = <&vreg_l7a_1p8>; @@ -906,8 +929,9 @@ }; &venus { + firmware-name = "qcom/sdm845/OnePlus/enchilada/venus.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/oneplus6/venus.mbn"; }; &wcd9340 { @@ -929,5 +953,6 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + qcom,calibration-variant = "oneplus_sdm845"; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index a259eb9d45ae..dcaea15c6d43 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -30,14 +30,18 @@ }; }; +&bq27441_fg { + monitored-battery = <&battery>; +}; + &display_panel { status = "okay"; compatible = "samsung,sofef00"; }; -&bq27441_fg { - monitored-battery = <&battery>; +&framebuffer { + height = <2280>; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index d6cd873aef0d..0542333a8357 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -35,6 +35,10 @@ compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; }; +&framebuffer { + height = <2340>; +}; + &i2c4 { /* nxp,tfa9894 @ 0x34 */ }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts index 5d41a92cfebf..77f5872de6f1 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -254,7 +254,7 @@ }; &gpu_zap_shader { - firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn"; + firmware-name = "qcom/sdm845/Samsung/starqltechn/a630_zap.mbn"; }; &mdss { @@ -699,7 +699,8 @@ }; &adsp_pas { - firmware-name = "qcom/sdm845/starqltechn/adsp.mbn"; + firmware-name = "qcom/sdm845/Samsung/starqltechn/adsp.mbn"; + status = "okay"; }; @@ -904,20 +905,22 @@ }; &mss_pil { - firmware-name = "qcom/sdm845/starqltechn/mba.mbn", - "qcom/sdm845/starqltechn/modem.mbn"; + firmware-name = "qcom/sdm845/Samsung/starqltechn/mba.mbn", + "qcom/sdm845/Samsung/starqltechn/modem.mbn"; + status = "okay"; }; &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn"; + firmware-name = "qcom/sdm845/Samsung/starqltechn/ipa_fws.mbn"; + status = "okay"; }; &slpi_pas { - firmware-name = "qcom/sdm845/starqltechn/slpi.mbn"; + firmware-name = "qcom/sdm845/Samsung/starqltechn/slpi.mbn"; cx-supply = <&slpi_regulator>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index ddc2b3ca3bc5..51b041f91d3e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -108,8 +108,9 @@ }; &adsp_pas { + firmware-name = "qcom/sdm845/SHIFT/axolotl/adsp.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/axolotl/adsp.mbn"; }; &apps_rsc { @@ -409,8 +410,9 @@ }; &cdsp_pas { + firmware-name = "qcom/sdm845/SHIFT/axolotl/cdsp.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; }; &gcc { @@ -426,7 +428,7 @@ }; &gpu_zap_shader { - firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; + firmware-name = "qcom/sdm845/SHIFT/axolotl/a630_zap.mbn"; }; &i2c5 { @@ -458,7 +460,8 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn"; + firmware-name = "qcom/sdm845/SHIFT/axolotl/ipa_fws.mbn"; + status = "okay"; }; @@ -502,8 +505,9 @@ }; &mss_pil { + firmware-name = "qcom/sdm845/SHIFT/axolotl/mba.mbn", "qcom/sdm845/SHIFT/axolotl/modem.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; }; &pm8998_gpios { @@ -597,7 +601,8 @@ }; &slpi_pas { - firmware-name = "qcom/sdm845/axolotl/slpi.mbn"; + firmware-name = "qcom/sdm845/SHIFT/axolotl/slpi.mbn"; + status = "okay"; }; @@ -673,7 +678,7 @@ * This path is relative to the qca/ * subdir under lib/firmware. */ - firmware-name = "axolotl/crnv21.bin"; + firmware-name = "SHIFT/axolotl/crnv21.bin"; vddio-supply = <&vreg_s4a_1p8>; vddxo-supply = <&vreg_l7a_1p8>; @@ -727,8 +732,9 @@ }; &venus { + firmware-name = "qcom/sdm845/SHIFT/axolotl/venus.mbn"; + status = "okay"; - firmware-name = "qcom/sdm845/axolotl/venus.mbn"; }; &wifi { @@ -740,5 +746,6 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + qcom,calibration-variant = "shift_axolotl"; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 785006a15e97..01b570d0880d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -136,7 +136,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/beryllium/adsp.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/beryllium/adsp.mbn"; }; &apps_rsc { @@ -227,9 +227,15 @@ }; }; +&cci_i2c0 { + status = "okay"; + + /* IMX363 @ 10 */ +}; + &cdsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/beryllium/cdsp.mbn"; }; &gcc { @@ -249,7 +255,7 @@ }; &gpu_zap_shader { - firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/beryllium/a630_zap.mbn"; }; &ibb { @@ -261,6 +267,22 @@ qcom,discharge-resistor-kohms = <300>; }; +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; + + status = "okay"; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + /* TAS2559 @ 4C */ +}; + &lab { regulator-min-microvolt = <4600000>; regulator-max-microvolt = <6000000>; @@ -308,14 +330,8 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; -}; - -&ipa { - qcom,gsi-loader = "self"; - memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; - status = "okay"; + firmware-name = "qcom/sdm845/Xiaomi/beryllium/mba.mbn", + "qcom/sdm845/Xiaomi/beryllium/modem.mbn"; }; &pm8998_gpios { @@ -425,6 +441,12 @@ cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; }; +&slpi_pas { + firmware-name = "qcom/sdm845/Xiaomi/beryllium/slpi.mbn"; + + status = "okay"; +}; + &sound { compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active @@ -612,7 +634,7 @@ &venus { status = "okay"; - firmware-name = "qcom/sdm845/beryllium/venus.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/beryllium/venus.mbn"; }; &wcd9340 { @@ -636,4 +658,7 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,calibration-variant = "xiaomi_beryllium"; }; + diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 30e88ff010a3..a44d6e776c82 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -370,7 +370,8 @@ }; &cdsp_pas { - firmware-name = "qcom/sdm845/polaris/cdsp.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/polaris/cdsp.mbn"; + status = "okay"; }; @@ -395,7 +396,7 @@ }; &gpu_zap_shader { - firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/polaris/a630_zap.mbn"; }; &ibb { @@ -410,7 +411,8 @@ &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/polaris/ipa_fws.mbn"; + status = "okay"; }; @@ -502,7 +504,9 @@ }; &mss_pil { - firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/polaris/mba.mbn", + "qcom/sdm845/Xiaomi/polaris/modem.mbn"; + status = "okay"; }; @@ -623,7 +627,7 @@ compatible = "qcom,wcn3990-bt"; /* This path is relative to the qca/ subdir under lib/firmware. */ - firmware-name = "polaris/crnv21.bin"; + firmware-name = "Xiaomi/polaris/crnv21.bin"; vddio-supply = <&vreg_s4a_1p8>; vddxo-supply = <&vreg_l7a_1p8>; @@ -683,7 +687,8 @@ }; &venus { - firmware-name = "qcom/sdm845/polaris/venus.mbn"; + firmware-name = "qcom/sdm845/Xiaomi/polaris/venus.mbn"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts index 0ef9ea38a424..f04865381870 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts @@ -30,9 +30,7 @@ /delete-node/ &ipa_fw_mem; /delete-node/ &ipa_gsi_mem; /delete-node/ &gpu_mem; -/delete-node/ &adsp_mem; /delete-node/ &wlan_msa_mem; -/delete-node/ &slpi_mem; / { model = "Huawei MateBook E 2019"; @@ -145,22 +143,13 @@ no-map; }; - adsp_mem: adsp@8c500000 { - reg = <0 0x8c500000 0 0x1a00000>; - no-map; - }; - ipa_fw_mem: ipa-fw@8df00000 { - reg = <0 0x8df00000 0 0x100000>; + reg = <0 0x8df00000 0 0x5a000>; no-map; }; - slpi_mem: slpi@96700000 { - reg = <0 0x96700000 0 0x1200000>; - }; - - gpu_mem: gpu@97900000 { - reg = <0 0x97900000 0 0x5000>; + gpu_mem: gpu@8df5a000 { + reg = <0 0x8df5a000 0 0x5000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 5e2032c26ea3..88513b513871 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -870,7 +870,7 @@ <&apps_smmu 0x94 0x11>, <&apps_smmu 0x96 0x11>, <&apps_smmu 0x98 0x1>, - <&apps_smmu 0x9F 0>; + <&apps_smmu 0x9f 0>; }; crypto: crypto@1b3a000 { @@ -885,7 +885,7 @@ <&apps_smmu 0x94 0x11>, <&apps_smmu 0x96 0x11>, <&apps_smmu 0x98 0x1>, - <&apps_smmu 0x9F 0>; + <&apps_smmu 0x9f 0>; }; usb_qmpphy: phy@1615000 { diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts index 68a237215bd1..6b68e391cf3e 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts @@ -19,7 +19,7 @@ chassis-type = "handset"; /* required for bootloader to select correct board */ - qcom,msm-id = <QCOM_ID_SM6125>; + qcom,msm-id = <QCOM_ID_SM6125 0x10000>; qcom,board-id = <22 0>; chosen { diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 8848043f95f2..6e2bbf4f060a 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -14,7 +14,7 @@ compatible = "sony,pdx213", "qcom,sm6350"; chassis-type = "handset"; qcom,msm-id = <434 0x10000>, <459 0x10000>; - qcom,board-id = <0x1000B 0>; + qcom,board-id = <0x1000b 0>; chosen { #address-cells = <2>; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index 4afbab570ca1..a3c2b26736f4 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -246,6 +246,46 @@ }; }; }; + + vreg_32m_cam_dvdd_1p05: regulator-32m-cam-dvdd-1p05 { + compatible = "regulator-fixed"; + regulator-name = "32M_CAM_DVDD_1P05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pm6150l_gpios 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_s8e>; + }; + + vreg_48m_ois_avdd0_1p8: regulator-48m-ois-avdd0-1p8 { + compatible = "regulator-fixed"; + regulator-name = "48M_OIS_AVDD0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pm6150l_gpios 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_bob>; + }; + + vreg_48m_uw_avdd0_1p8: regulator-48m-uw-avdd0-1p8 { + compatible = "regulator-fixed"; + regulator-name = "48M_UW_AVDD0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_bob>; + }; + + vreg_ois_2p8: regulator-ois-2p8 { + compatible = "regulator-fixed"; + regulator-name = "OIS_2P8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vreg_bob>; + }; }; &adsp { @@ -512,11 +552,28 @@ }; &cci0_i2c0 { - /* IMX582 @ 0x1a */ + /* Main cam (Sony IMX582) @ 0x1a */ + /* VCM driver (Onsemi LC898219XI) @ 0x28 */ + /* OIS driver (CML CM401) @ 0x30 */ + + eeprom@50 { + compatible = "giantec,gt24p128e", "atmel,24c128"; + reg = <0x50>; + vcc-supply = <&vreg_l6p>; + read-only; + }; }; &cci0_i2c1 { - /* IMX582 @ 0x1a */ + /* VCM driver (Dongwoon DW9800W) @ 0xc */ + /* Ultra-wide cam (Sony IMX582) @ 0x1a */ + + eeprom@50 { + compatible = "giantec,gt24p64a", "atmel,24c64"; + reg = <0x50>; + vcc-supply = <&vreg_l6p>; + read-only; + }; }; &cci1 { @@ -524,7 +581,14 @@ }; &cci1_i2c0 { - /* IMX576 @ 0x10 */ + /* Front cam (Sony IMX576) @ 0x10 */ + + eeprom@50 { + compatible = "giantec,gt24p64a", "atmel,24c64"; + reg = <0x50>; + vcc-supply = <&vreg_l6p>; + read-only; + }; }; &cdsp { @@ -629,6 +693,8 @@ regulator-name = "vreg_l6p"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1800000>; + /* Pull-up for CCI I2C busses */ + regulator-always-on; }; vreg_l7p: ldo7 { diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 0339a572f34d..1eea9c5c6684 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -387,6 +387,10 @@ status = "okay"; }; +&gpu_zap_shader { + firmware-name = "qcom/sm8150/a640_zap.mbn"; +}; + &i2c4 { clock-frequency = <100000>; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 12e8e1ada6d8..0f2d511624a8 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -358,6 +358,10 @@ status = "okay"; }; +&gpu_zap_shader { + firmware-name = "qcom/sm8150/a640_zap.mbn"; +}; + &pon { mode-bootloader = <0x2>; mode-recovery = <0x1>; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index e3ec99972a28..97ca5275d740 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1693,6 +1693,15 @@ status = "disabled"; }; + uart13: serial@c8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00c8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2c14: i2c@c90000 { compatible = "qcom,geni-i2c"; reg = <0 0x00c90000 0 0x4000>; @@ -2381,7 +2390,7 @@ reg = <0x0 0x03100000 0x0 0x300000>, <0x0 0x03500000 0x0 0x300000>, <0x0 0x03900000 0x0 0x300000>, - <0x0 0x03D00000 0x0 0x300000>; + <0x0 0x03d00000 0x0 0x300000>; reg-names = "west", "east", "north", "south"; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&tlmm 0 0 176>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts index f5c193c6c5f9..3ea9d2b1a7d5 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts @@ -373,6 +373,10 @@ status = "okay"; }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/a650_zap.mbn"; +}; + &pon { mode-bootloader = <0x2>; mode-recovery = <0x1>; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso index 66bec0fef766..21bfba6a1182 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso @@ -52,14 +52,13 @@ pinctrl-0 = <&cam3_default>; pinctrl-names = "default"; afvdd-supply = <&vreg_l7n_2p96>; - avdd-supply = <&vreg_l4m_2p8>; - dovdd-supply = <&vreg_l5n_1p8>; - dvdd-supply = <&vreg_l2m_1p056>; + vdda-supply = <&vreg_l4m_2p8>; + vddd-supply = <&vreg_l2m_1p056>; + vddio-supply = <&vreg_l5n_1p8>; port { cam_tele: endpoint { link-frequencies = /bits/ 64 <602500000>; - data-lanes = <0 1 2 3>; remote-endpoint = <&csiphy3_ep>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts index 599850c48494..ee13e6136a82 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -1107,6 +1107,22 @@ vdd3-supply = <&vreg_l5b_3p1>; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index f430038bd402..94ed1c221856 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -789,6 +789,22 @@ vdd3-supply = <&vreg_l5b_3p1>; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 05c98fe2c25b..c35d4737a412 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -748,14 +748,13 @@ pinctrl-0 = <&cam3_default>; pinctrl-names = "default"; afvdd-supply = <&vreg_l7n_2p96>; - avdd-supply = <&vreg_l4m_2p8>; - dovdd-supply = <&vreg_l5n_1p8>; - dvdd-supply = <&vreg_l2m_1p056>; + vdda-supply = <&vreg_l4m_2p8>; + vddd-supply = <&vreg_l2m_1p056>; + vddio-supply = <&vreg_l5n_1p8>; port { cam_tele: endpoint { link-frequencies = /bits/ 64 <602500000>; - data-lanes = <0 1 2 3>; remote-endpoint = <&csiphy3_ep>; }; }; @@ -1003,6 +1002,22 @@ vdd3-supply = <&vreg_l5b_3p1>; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts index b4ef40ae2cd9..81c02ee27fe9 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts @@ -533,6 +533,22 @@ }; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts index d90dc7b37c4a..0e6ed6fce614 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts @@ -661,6 +661,22 @@ }; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &pm8550vs_g_gpios { cam_pwr_a_cs: cam-pwr-a-cs-state { pins = "gpio4"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk-rear-camera-card.dtso b/arch/arm64/boot/dts/qcom/sm8650-hdk-rear-camera-card.dtso new file mode 100644 index 000000000000..8a7c6d7634d3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk-rear-camera-card.dtso @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SM8650-HDK Rear Camera Card overlay + * + * Copyright (c) 2025, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,sm8650-camcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/dts-v1/; +/plugin/; + +&camss { + vdd-csiphy35-0p9-supply = <&vreg_l2i_0p88>; + vdd-csiphy35-1p2-supply = <&vreg_l3i_1p2>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + + csiphy3_ep: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor@56 { + compatible = "samsung,s5kjn1"; + reg = <0x56>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7m_2p96>; + vdda-supply = <&vreg_l4m_2p8>; + vddd-supply = <&vreg_l2m_1p056>; + vddio-supply = <&vreg_l3n_1p8>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <700000000>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts index 5bf1af3308ce..eabc828c05b4 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -1046,6 +1046,22 @@ vdd3-supply = <&vreg_l5b_3p1>; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts index c67bbace2743..bb688a5d21c2 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -692,6 +692,22 @@ vdd3-supply = <&vreg_l5b_3p1>; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index b2feac61a89f..087828c60692 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -741,6 +741,49 @@ }; }; +&camss { + vdd-csiphy35-0p9-supply = <&vreg_l2i_0p88>; + vdd-csiphy35-1p2-supply = <&vreg_l3i_1p2>; + status = "okay"; + + ports { + port@3 { + csiphy3_ep: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + sensor@56 { + compatible = "samsung,s5kjn1"; + reg = <0x56>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7m_2p96>; + vdda-supply = <&vreg_l4m_2p8>; + vddd-supply = <&vreg_l2m_1p056>; + vddio-supply = <&vreg_l3n_1p8>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <700000000>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + &gpi_dma1 { status = "okay"; }; @@ -1002,6 +1045,22 @@ vdd3-supply = <&vreg_l5b_3p1>; }; +&pm8550vs_c { + status = "okay"; +}; + +&pm8550vs_d { + status = "okay"; +}; + +&pm8550vs_e { + status = "okay"; +}; + +&pm8550vs_g { + status = "okay"; +}; + &qup_i2c3_data_clk { /* Use internal I2C pull-up */ bias-pull-up = <2200>; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 07ae74851621..e528e9948faf 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -5380,6 +5380,193 @@ }; }; + camss: isp@acb6000 { + compatible = "qcom,sm8650-camss"; + + reg = <0 0x0acb6000 0 0x1000>, + <0 0x0acb8000 0 0x1000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acbc000 0 0x1000>, + <0 0x0accb000 0 0x1000>, + <0 0x0acd0000 0 0x1000>, + <0 0x0ace4000 0 0x2000>, + <0 0x0ace6000 0 0x2000>, + <0 0x0ace8000 0 0x2000>, + <0 0x0acea000 0 0x2000>, + <0 0x0acec000 0 0x2000>, + <0 0x0acee000 0 0x2000>, + <0 0x0ac62000 0 0xf000>, + <0 0x0ac71000 0 0xf000>, + <0 0x0ac80000 0 0xf000>, + <0 0x0accc000 0 0x2000>, + <0 0x0acd1000 0 0x2000>; + reg-names = "csid_wrapper", + "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>, + <&camcc CAM_CC_CPAS_IFE_0_CLK>, + <&camcc CAM_CC_CPAS_IFE_1_CLK>, + <&camcc CAM_CC_CPAS_IFE_2_CLK>, + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>, + <&camcc CAM_CC_CSID_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_2_CLK>, + <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cpas_fast_ahb", + "cpas_vfe0", + "cpas_vfe1", + "cpas_vfe2", + "cpas_vfe_lite", + "csid", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "csiphy_rx", + "gcc_axi_hf", + "qdss_debug_xo", + "vfe0", + "vfe0_fast_ahb", + "vfe1", + "vfe1_fast_ahb", + "vfe2", + "vfe2_fast_ahb", + "vfe_lite", + "vfe_lite_ahb", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 603 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 431 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 605 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 376 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 89 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 602 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 604 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 688 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 606 IRQ_TYPE_EDGE_RISING 0>, + <GIC_SPI 377 IRQ_TYPE_EDGE_RISING 0>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 + &mc_virt SLAVE_EBI1 0>; + interconnect-names = "ahb", + "hf_mnoc"; + + iommus = <&apps_smmu 0x800 0x20>, + <&apps_smmu 0x18a0 0x40>, + <&apps_smmu 0x1860 0x00>; + + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_IFE_2_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "ife0", "ife1", "ife2", "top"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + }; + + port@5 { + reg = <5>; + }; + }; + }; + camcc: clock-controller@ade0000 { compatible = "qcom,sm8650-camcc"; reg = <0 0x0ade0000 0 0x20000>; @@ -5922,6 +6109,118 @@ wakeup-parent = <&pdc>; + cam0_default: cam0-default-state { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam0_sleep: cam0-sleep-state { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam1_default: cam1-default-state { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam1_sleep: cam1-sleep-state { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam2_default: cam2-default-state { + pins = "gpio102"; + function = "cam_aon_mclk2"; + drive-strength = <2>; + bias-disable; + }; + + cam2_sleep: cam2-sleep-state { + pins = "gpio102"; + function = "cam_aon_mclk2"; + drive-strength = <2>; + bias-pull-down; + }; + + cam3_default: cam3-default-state { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam3_sleep: cam3-sleep-state { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam4_default: cam4-default-state { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-disable; + }; + + cam4_sleep: cam4-sleep-state { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-pull-down; + }; + + cam5_default: cam5-default-state { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam5_sleep: cam5-sleep-state { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam6_default: cam6-default-state { + pins = "gpio108"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam6_sleep: cam6-sleep-state { + pins = "gpio108"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam7_default: cam7-default-state { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam7_sleep: cam7-sleep-state { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + cci0_0_default: cci0-0-default-state { sda-pins { pins = "gpio113"; diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts index c8cb521b4c26..cb718331496e 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts @@ -925,6 +925,10 @@ }; }; +&iris { + status = "okay"; +}; + &lpass_vamacro { pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; @@ -1039,10 +1043,14 @@ }; &pmih0108_eusb2_repeater { - status = "okay"; + qcom,tune-usb2-preem = /bits/ 8 <0x3>; + qcom,tune-usb2-amplitude = /bits/ 8 <0xa>; + qcom,squelch-detector-bp = <(-2000)>; vdd18-supply = <&vreg_l15b_1p8>; vdd3-supply = <&vreg_l5b_3p1>; + + status = "okay"; }; &qupv3_1 { @@ -1075,6 +1083,22 @@ status = "fail"; }; +&sdhc_2 { + cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + &swr0 { status = "okay"; @@ -1194,6 +1218,13 @@ }; }; + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + wcd_default: wcd-reset-n-active-state { pins = "gpio101"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts index b0cb61c5a603..801c46d55602 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts @@ -858,6 +858,10 @@ }; }; +&iris { + status = "okay"; +}; + &pm8550_flash { status = "okay"; @@ -961,6 +965,22 @@ status = "okay"; }; +&sdhc_2 { + cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + &swr0 { status = "okay"; @@ -1053,6 +1073,13 @@ /* reserved for secure world */ gpio-reserved-ranges = <36 4>, <74 1>; + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + spkr_0_sd_n_active: spkr-0-sd-n-active-state { pins = "gpio76"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index 3f0b57f428bb..a76bf5193a70 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8750-gcc.h> #include <dt-bindings/clock/qcom,sm8750-tcsr.h> +#include <dt-bindings/clock/qcom,sm8750-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,icc.h> @@ -35,8 +36,8 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd0>; - power-domain-names = "psci"; + power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; l2_0: l2-cache { compatible = "cache"; @@ -51,8 +52,8 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd1>; - power-domain-names = "psci"; + power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; }; cpu2: cpu@200 { @@ -61,8 +62,8 @@ reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd2>; - power-domain-names = "psci"; + power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; }; cpu3: cpu@300 { @@ -71,8 +72,8 @@ reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd3>; - power-domain-names = "psci"; + power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; }; cpu4: cpu@400 { @@ -81,8 +82,8 @@ reg = <0x0 0x400>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd4>; - power-domain-names = "psci"; + power-domains = <&cpu_pd4>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; }; cpu5: cpu@500 { @@ -91,8 +92,8 @@ reg = <0x0 0x500>; enable-method = "psci"; next-level-cache = <&l2_0>; - power-domains = <&cpu_pd5>; - power-domain-names = "psci"; + power-domains = <&cpu_pd5>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; }; cpu6: cpu@10000 { @@ -101,8 +102,8 @@ reg = <0x0 0x10000>; enable-method = "psci"; next-level-cache = <&l2_1>; - power-domains = <&cpu_pd6>; - power-domain-names = "psci"; + power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; l2_1: l2-cache { compatible = "cache"; @@ -117,8 +118,8 @@ reg = <0x0 0x10100>; enable-method = "psci"; next-level-cache = <&l2_1>; - power-domains = <&cpu_pd7>; - power-domain-names = "psci"; + power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; }; cpu-map { @@ -206,6 +207,21 @@ interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; }; + + scmi { + compatible = "arm,scmi"; + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #power-domain-cells = <1>; + }; + }; }; clk_virt: interconnect-0 { @@ -2073,6 +2089,8 @@ <&apps_smmu 0x481 0>; qcom,ee = <0>; + qcom,num-ees = <4>; + num-channels = <20>; qcom,controlled-remotely; }; @@ -2582,6 +2600,60 @@ }; }; + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8750-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + qcom,dll-config = <0x0007442c>; + qcom,ddr-config = <0x80040868>; + + iommus = <&apps_smmu 0x540 0x0>; + dma-coherent; + + bus-width = <4>; + max-sd-hs-hz = <37500000>; + + resets = <&gcc GCC_SDCC2_BCR>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + usb_hsphy: phy@88e3000 { compatible = "qcom,sm8750-m31-eusb2-phy"; reg = <0x0 0x88e3000 0x0 0x29c>; @@ -2740,6 +2812,126 @@ }; }; + iris: video-codec@aa00000 { + compatible = "qcom,sm8750-iris"; + reg = <0x0 0x0aa00000 0x0 0xf0000>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>, + <&gcc GCC_VIDEO_AXI1_CLK>, + <&videocc VIDEO_CC_MVS0C_FREERUN_CLK>, + <&videocc VIDEO_CC_MVS0_FREERUN_CLK>; + clock-names = "iface", + "core", + "vcodec0_core", + "iface1", + "core_freerun", + "vcodec0_core_freerun"; + + dma-coherent; + iommus = <&apps_smmu 0x1940 0>, + <&apps_smmu 0x1947 0>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO_MVP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + memory-region = <&video_mem>; + + operating-points-v2 = <&iris_opp_table>; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>, + <&gcc GCC_VIDEO_AXI1_CLK_ARES>, + <&videocc VIDEO_CC_MVS0C_FREERUN_CLK_ARES>, + <&videocc VIDEO_CC_MVS0_FREERUN_CLK_ARES>; + reset-names = "bus0", + "bus1", + "core", + "vcodec0_core"; + + /* + * IRIS firmware is signed by vendors, only + * enable in boards where the proper signed firmware + * is available. + */ + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>, + <&rpmhpd_opp_low_svs_d1>; + }; + + opp-338000000 { + opp-hz = /bits/ 64 <338000000>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + }; + + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + required-opps = <&rpmhpd_opp_svs>, + <&rpmhpd_opp_svs>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-533333334 { + opp-hz = /bits/ 64 <533333334>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-570000000 { + opp-hz = /bits/ 64 <570000000>; + required-opps = <&rpmhpd_opp_nom_l1>, + <&rpmhpd_opp_nom_l1>; + }; + + opp-630000000 { + opp-hz = /bits/ 64 <630000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + }; + }; + + videocc: clock-controller@aaf0000 { + compatible = "qcom,sm8750-videocc"; + reg = <0x0 0x0aaf0000 0x0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MXC>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8750-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>; @@ -3471,7 +3663,7 @@ <0x0 0x40000f20 0x0 0xa8>, <0x0 0x40001000 0x0 0x1000>, <0x0 0x40100000 0x0 0x100000>, - <0x0 0x01C03000 0x0 0x1000>; + <0x0 0x01c03000 0x0 0x1000>; reg-names = "parf", "dbi", "elbi", @@ -3743,6 +3935,13 @@ }; }; + cpucp_mbox: mailbox@16430000 { + compatible = "qcom,sm8750-cpucp-mbox", "qcom,x1e80100-cpucp-mbox"; + reg = <0x0 0x16430000 0x0 0x8000>, <0x0 0x17830000 0x0 0x8000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + apps_rsc: rsc@16500000 { compatible = "qcom,rpmh-rsc"; reg = <0x0 0x16500000 0x0 0x10000>, @@ -3954,6 +4153,25 @@ }; }; + sram: sram@17b4e000 { + compatible = "mmio-sram"; + reg = <0x0 0x17b4e000 0x0 0x400>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x17b4e000 0x400>; + + cpu_scp_lpri0: scp-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_lpri1: scp-sram-section@200 { + compatible = "arm,scmi-shmem"; + reg = <0x200 0x200>; + }; + }; + /* cluster0 */ pmu@240b3400 { compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon"; diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi index d1dbfa3bd81c..d956c91c7cc8 100644 --- a/arch/arm64/boot/dts/qcom/talos.dtsi +++ b/arch/arm64/boot/dts/qcom/talos.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -479,12 +480,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect-1 { - compatible = "qcom,qcs615-ipa-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - mc_virt: interconnect-2 { compatible = "qcom,qcs615-mc-virt"; #interconnect-cells = <2>; @@ -494,7 +489,7 @@ smp2p-adsp { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; - interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING 0>; /* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */ mboxes = <&apss_shared 26>; @@ -516,7 +511,7 @@ smp2p-cdsp { compatible = "qcom,smp2p"; qcom,smem = <94>, <432>; - interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING 0>; mboxes = <&apss_shared 6>; qcom,local-pid = <0>; @@ -555,6 +550,16 @@ }; }; + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -694,8 +699,8 @@ "cqhci", "ice"; - interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "hc_irq", "pwr_irq"; @@ -756,14 +761,14 @@ compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0x0 0x800000 0x0 0x60000>; #dma-cells = <3>; - interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>; dma-channels = <8>; dma-channel-mask = <0xf>; iommus = <&apps_smmu 0xd6 0x0>; @@ -790,7 +795,7 @@ clock-names = "se"; pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>; pinctrl-names = "default"; - interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH 0>; interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS @@ -807,7 +812,7 @@ reg = <0x0 0x884000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c1_data_clk>; @@ -835,7 +840,7 @@ reg = <0x0 0x888000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c2_data_clk>; @@ -861,7 +866,7 @@ spi2: spi@888000 { compatible = "qcom,geni-spi"; reg = <0x0 0x00888000 0x0 0x4000>; - interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; @@ -886,7 +891,7 @@ uart2: serial@888000 { compatible = "qcom,geni-uart"; reg = <0x0 0x00888000 0x0 0x4000>; - interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, @@ -908,7 +913,7 @@ reg = <0x0 0x88c000 0x0 0x4000>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c3_data_clk>; @@ -936,14 +941,14 @@ compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0x0 0xa00000 0x0 0x60000>; #dma-cells = <3>; - interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>; dma-channels = <8>; dma-channel-mask = <0xf>; iommus = <&apps_smmu 0x376 0x0>; @@ -970,7 +975,7 @@ clock-names = "se"; pinctrl-0 = <&qup_i2c4_data_clk>; pinctrl-names = "default"; - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS @@ -998,7 +1003,7 @@ clock-names = "se"; pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; pinctrl-names = "default"; - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS @@ -1024,7 +1029,7 @@ pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; pinctrl-names = "default"; - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS @@ -1043,7 +1048,7 @@ clock-names = "se"; pinctrl-0 = <&qup_i2c5_data_clk>; pinctrl-names = "default"; - interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS @@ -1071,7 +1076,7 @@ clock-names = "se"; pinctrl-0 = <&qup_i2c6_data_clk>; pinctrl-names = "default"; - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS @@ -1099,7 +1104,7 @@ clock-names = "se"; pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; pinctrl-names = "default"; - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS @@ -1125,7 +1130,7 @@ pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; pinctrl-names = "default"; - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS @@ -1144,7 +1149,7 @@ clock-names = "se"; pinctrl-0 = <&qup_i2c7_data_clk>; pinctrl-names = "default"; - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS @@ -1172,7 +1177,7 @@ clock-names = "se"; pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; pinctrl-names = "default"; - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS @@ -1198,7 +1203,7 @@ pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; pinctrl-names = "default"; - interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>; interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS @@ -1265,15 +1270,15 @@ linux,pci-domain = <0>; num-lanes = <1>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "msi0", "msi1", "msi2", @@ -1286,10 +1291,10 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, <&gcc GCC_PCIE_0_AUX_CLK>, @@ -1393,7 +1398,7 @@ reg-names = "std", "ice"; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -1502,7 +1507,7 @@ cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0x0 0x01dc4000 0x0 0x24000>; - interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; @@ -1541,7 +1546,7 @@ reg-names = "east", "west", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>; gpio-ranges = <&tlmm 0 0 124>; gpio-controller; #gpio-cells = <2>; @@ -3468,7 +3473,7 @@ compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas"; reg = <0x0 0x08300000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>, <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3495,7 +3500,7 @@ status = "disabled"; glink-edge { - interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING 0>; mboxes = <&apss_shared 4>; label = "cdsp"; qcom,remote-pid = <5>; @@ -3555,7 +3560,7 @@ pmu@90b6300 { compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x0 0x090b6300 0x0 0x600>; - interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>; interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; @@ -3577,7 +3582,7 @@ pmu@90cd000 { compatible = "qcom,qcs615-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; reg = <0x0 0x090cd000 0x0 0x1000>; - interrupts = <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH 0>; interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; @@ -3629,8 +3634,8 @@ reg = <0x0 0x08804000 0x0 0x1000>; reg-names = "hc"; - interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "hc_irq", "pwr_irq"; @@ -3703,7 +3708,7 @@ venus: video-codec@aa00000 { compatible = "qcom,qcs615-venus", "qcom,sc7180-venus"; reg = <0x0 0x0aa00000 0x0 0x100000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, <&videocc VIDEO_CC_VENUS_AHB_CLK>, @@ -3814,7 +3819,7 @@ <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-controller; #interrupt-cells = <1>; @@ -3855,6 +3860,7 @@ reg = <0>; dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; }; }; @@ -3887,6 +3893,89 @@ }; }; + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm6150-dp", "qcom,sm8150-dp", "qcom,sm8350-dp"; + + reg = <0x0 0x0ae90000 0x0 0x200>, + <0x0 0x0ae90200 0x0 0x200>, + <0x0 0x0ae90400 0x0 0x600>, + <0x0 0x0ae90a00 0x0 0x600>, + <0x0 0x0ae91000 0x0 0x600>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_qmpphy_2 QMP_USB43DP_DP_LINK_CLK>, + <&usb_qmpphy_2 QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_qmpphy_2 QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_qmpphy_2 QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <3 2 0 1>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm6150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0 0x0ae94000 0x0 0x400>; @@ -3982,8 +4071,8 @@ <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, <0>, - <0>, - <0>; + <&usb_qmpphy_2 QMP_USB43DP_DP_LINK_CLK>, + <&usb_qmpphy_2 QMP_USB43DP_DP_VCO_DIV_CLK>; #clock-cells = <1>; #reset-cells = <1>; @@ -4003,7 +4092,7 @@ aoss_qmp: power-management@c300000 { compatible = "qcom,qcs615-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; - interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING 0>; mboxes = <&apss_shared 0>; #clock-cells = <0>; @@ -4035,71 +4124,71 @@ #global-interrupts = <1>; dma-coherent; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>; }; spmi_bus: spmi@c440000 { @@ -4128,12 +4217,22 @@ compatible = "arm,gic-v3"; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <0>; - #interrupt-cells = <3>; + #interrupt-cells = <4>; interrupt-controller; #redistributor-regions = <1>; redistributor-stride = <0x0 0x20000>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu6 &cpu7>; + }; + }; }; apss_shared: mailbox@17c00000 { @@ -4146,7 +4245,7 @@ watchdog: watchdog@17c10000 { compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt"; reg = <0x0 0x17c10000 0x0 0x1000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&sleep_clk>; }; @@ -4161,49 +4260,49 @@ reg = <0x17c21000 0x1000>, <0x17c22000 0x1000>; frame-number = <0>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; }; frame@17c23000 { reg = <0x17c23000 0x1000>; frame-number = <1>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>; status = "disabled"; }; frame@17c25000 { reg = <0x17c25000 0x1000>; frame-number = <2>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; status = "disabled"; }; frame@17c27000 { reg = <0x17c27000 0x1000>; frame-number = <3>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; status = "disabled"; }; frame@17c29000 { reg = <0x17c29000 0x1000>; frame-number = <4>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>; status = "disabled"; }; frame@17c2b000 { reg = <0x17c2b000 0x1000>; frame-number = <5>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>; status = "disabled"; }; frame@17c2d000 { reg = <0x17c2d000 0x1000>; frame-number = <6>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; status = "disabled"; }; }; @@ -4217,9 +4316,9 @@ "drv-1", "drv-2"; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>; qcom,drv-id = <2>; qcom,tcs-offset = <0xd00>; @@ -4362,6 +4461,32 @@ status = "disabled"; }; + usb_qmpphy_2: phy@88e8000 { + compatible = "qcom,qcs615-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x2000>; + + clocks = <&gcc GCC_USB2_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>, + <&gcc GCC_AHB2PHY_WEST_CLK>, + <&gcc GCC_USB2_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + + resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR >, + <&gcc GCC_USB3_DP_PHY_SEC_BCR>; + reset-names = "phy_phy", + "dp_phy"; + + #clock-cells = <1>; + #phy-cells = <1>; + + qcom,tcsr-reg = <&tcsr 0xbff0 0xb24c>; + + status = "disabled"; + }; + usb_1: usb@a6f8800 { compatible = "qcom,qcs615-dwc3", "qcom,dwc3"; reg = <0x0 0x0a6f8800 0x0 0x400>; @@ -4383,8 +4508,8 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>, <&pdc 9 IRQ_TYPE_EDGE_BOTH>, <&pdc 8 IRQ_TYPE_EDGE_BOTH>, <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; @@ -4410,7 +4535,7 @@ reg = <0x0 0x0a600000 0x0 0xcd00>; iommus = <&apps_smmu 0x140 0x0>; - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>; phys = <&usb_1_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; @@ -4447,8 +4572,8 @@ <&gcc GCC_USB20_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH 0>, + <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH 0>, <&pdc 11 IRQ_TYPE_EDGE_BOTH>, <&pdc 10 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "pwr_event", @@ -4474,7 +4599,7 @@ reg = <0x0 0x0a800000 0x0 0xcd00>; iommus = <&apps_smmu 0xe0 0x0>; - interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>; phys = <&usb_hsphy_2>; phy-names = "usb2-phy"; @@ -4493,8 +4618,8 @@ compatible = "qcom,qcs615-tsens", "qcom,tsens-v2"; reg = <0x0 0x0c263000 0x0 0x1000>, <0x0 0x0c222000 0x0 0x1000>; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "uplow", "critical"; #qcom,sensors = <16>; #thermal-sensor-cells = <1>; @@ -4504,7 +4629,7 @@ compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas"; reg = <0x0 0x62400000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING 0>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -4531,7 +4656,7 @@ status = "disabled"; glink_edge: glink-edge { - interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING 0>; mboxes = <&apss_shared 24>; label = "lpass"; qcom,remote-pid = <2>; @@ -4590,10 +4715,10 @@ arch_timer: timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi b/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi new file mode 100644 index 000000000000..d77be02848b5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1-microsoft-denali.dtsi @@ -0,0 +1,1322 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 Dale Whinham <daleyo@gmail.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "hamoa-pmics.dtsi" + +/ { + aliases { + serial0 = &uart2; + serial1 = &uart14; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, + <&tlmm 123 GPIO_ACTIVE_HIGH>; + + /* Left-side bottom port */ + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + + /* Left-side top port */ + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss1_hs_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss1_ss_in: endpoint { + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; + }; + }; + }; + }; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rtmr1_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-Microsoft-Surface-Pro-11"; + audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT", + "SpkrRight IN", "WSA WSA_SPK2 OUT", + "VA DMIC0", "vdd-micb", + "VA DMIC1", "vdd-micb"; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, + <&swr0 0>, <&lpass_wsamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_microcode_mem>; + firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + + status = "okay"; + + /* Something @39, @3e, @44 */ +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + /* Left-side bottom port */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + status = "okay"; + + /* Something @12, @14, @16, @18, @1a */ +}; + +&i2c7 { + clock-frequency = <400000>; + + status = "okay"; + + /* Left-side top port */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + compatible = "qcom,x1e80100-dp"; + /delete-property/ #sound-dai-cells; + + status = "okay"; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_3p3>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; + + rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + +&pm8550ve_9_gpios { + rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + +&pmc8380_3_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio4"; + function = "normal"; + power-source = <1>; /* 1.8V */ + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/microsoft/Denali/qcadsp8380.mbn", + "qcom/x1e80100/microsoft/Denali/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/microsoft/Denali/qccdsp8380.mbn", + "qcom/x1e80100/microsoft/Denali/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&smb2360_1 { + status = "okay"; +}; + +&smb2360_1_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l14b_3p0>; +}; + +&smb2360_2 { + status = "okay"; +}; + +&smb2360_2_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l8b_3p0>; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Speaker */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Speaker */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + hall_int_n_default: hall-int-n-state { + pins = "gpio2"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + ssam_state: ssam-state-state { + pins = "gpio91"; + function = "gpio"; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio225"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart2 { + status = "okay"; + + embedded-controller { + compatible = "microsoft,surface-sam"; + + interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>; + + current-speed = <4000000>; + + pinctrl-0 = <&ssam_state>; + pinctrl-names = "default"; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_1_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss1_dwc3_hs { + remote-endpoint = <&pmic_glink_ss1_hs_in>; +}; + +&usb_1_ss1_qmpphy_out { + remote-endpoint = <&retimer_ss1_ss_in>; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index a9643cd746d5..d5a60671a383 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -1003,9 +1003,6 @@ }; &pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie4_default>; pinctrl-names = "default"; @@ -1019,10 +1016,12 @@ status = "okay"; }; -&pcie5 { - perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; +&pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; +}; +&pcie5 { vddpe-3v3-supply = <&vreg_wwan>; pinctrl-0 = <&pcie5_default>; @@ -1038,10 +1037,12 @@ status = "okay"; }; -&pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +&pcie5_port0 { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; +}; +&pcie6a { vddpe-3v3-supply = <&vreg_nvme>; pinctrl-names = "default"; @@ -1057,6 +1058,11 @@ status = "okay"; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + &pm8550_gpios { rtmr0_default: rtmr0-reset-n-active-state { pins = "gpio10"; diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 80ece9db875a..4d7fd51f370b 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -62,6 +62,45 @@ }; }; + hdmi-bridge { + compatible = "realtek,rtd2171"; + + pinctrl-0 = <&hdmi_hpd_default>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_dp_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_tmds_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_bridge_tmds_out>; + }; + }; + }; + pmic-glink { compatible = "qcom,x1e80100-pmic-glink", "qcom,sm8550-pmic-glink", @@ -351,6 +390,54 @@ "VA DMIC1", "VA MIC BIAS1", "TX SWR_INPUT1", "ADC2_OUTPUT"; + displayport-0-dai-link { + link-name = "DisplayPort0 Playback"; + + codec { + sound-dai = <&mdss_dp0>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + displayport-1-dai-link { + link-name = "DisplayPort1 Playback"; + + codec { + sound-dai = <&mdss_dp1>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_1>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + displayport-2-dai-link { + link-name = "DisplayPort2 Playback"; + + codec { + sound-dai = <&mdss_dp2>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_2>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + wcd-playback-dai-link { link-name = "WCD Playback"; @@ -1028,6 +1115,14 @@ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { /delete-property/ #sound-dai-cells; @@ -1065,9 +1160,6 @@ }; &pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie4_default>; pinctrl-names = "default"; @@ -1081,10 +1173,12 @@ status = "okay"; }; -&pcie5 { - perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; +&pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; +}; +&pcie5 { vddpe-3v3-supply = <&vreg_wwan>; pinctrl-0 = <&pcie5_default>; @@ -1100,10 +1194,12 @@ status = "okay"; }; -&pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +&pcie5_port0 { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; +}; +&pcie6a { vddpe-3v3-supply = <&vreg_nvme>; pinctrl-0 = <&pcie6a_default>; @@ -1119,6 +1215,11 @@ status = "okay"; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + &pm8550_gpios { rtmr0_default: rtmr0-reset-n-active-state { pins = "gpio10"; @@ -1317,6 +1418,12 @@ output-low; }; + hdmi_hpd_default: hdmi-hpd-default-state { + pins = "gpio126"; + function = "usb2_dp"; + bias-disable; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; @@ -1548,6 +1655,34 @@ remote-endpoint = <&retimer_ss1_ss_in>; }; +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; + + ports { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + /delete-node/ endpoint; + + usb_1_ss2_qmpphy_out_dp: endpoint@0 { + reg = <0>; + + data-lanes = <3 2 1 0>; + remote-endpoint = <&hdmi_bridge_dp_in>; + }; + + /* No USB3 lanes connected */ + }; + }; +}; + &usb_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts index d4df21de0d95..17269eb0638a 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -37,6 +37,45 @@ }; }; + hdmi-bridge { + compatible = "parade,ps185hdm"; + + pinctrl-0 = <&hdmi_hpd_default>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_dp_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_tmds_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_bridge_tmds_out>; + }; + }; + }; + pmic-glink { compatible = "qcom,x1e80100-pmic-glink", "qcom,sm8550-pmic-glink", @@ -69,7 +108,15 @@ reg = <1>; pmic_glink_ss0_ss_in: endpoint { - remote-endpoint = <&usb_1_ss0_qmpphy_out>; + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; }; }; }; @@ -98,7 +145,15 @@ reg = <1>; pmic_glink_ss1_ss_in: endpoint { - remote-endpoint = <&usb_1_ss1_qmpphy_out>; + remote-endpoint = <&retimer_ss1_ss_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_ss1_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss1_con_sbu_out>; }; }; }; @@ -147,6 +202,102 @@ regulator-boot-on; }; + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p15: regulator-rtmr1-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_1p8: regulator-rtmr1-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr1_3p3: regulator-rtmr1-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR1_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb1_pwr_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; @@ -506,15 +657,62 @@ &i2c1 { clock-frequency = <400000>; status = "okay"; - - /* PS8830 USB4 Retimer? @ 0x8 */ }; &i2c3 { clock-frequency = <400000>; status = "okay"; - /* PS8830 USB4 Retimer? @ 0x8 */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x08>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + vddio-supply = <&vreg_rtmr0_1p8>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + orientation-switch; + retimer-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; }; &i2c5 { @@ -583,13 +781,91 @@ clock-frequency = <400000>; status = "okay"; - /* PS8830 USB4 Retimer? @ 0x8 */ + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK4>; + + vdd-supply = <&vreg_rtmr1_1p15>; + vdd33-supply = <&vreg_rtmr1_3p3>; + vdd33-cap-supply = <&vreg_rtmr1_3p3>; + vddar-supply = <&vreg_rtmr1_1p15>; + vddat-supply = <&vreg_rtmr1_1p15>; + vddio-supply = <&vreg_rtmr1_1p8>; + + reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr1_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss1_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss1_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss1_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss1_con_sbu_in>; + }; + }; + }; + }; +}; + +&iris { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn"; + status = "okay"; }; &mdss { status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp1 { + status = "okay"; +}; + +&mdss_dp1_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { /delete-property/ #sound-dai-cells; @@ -631,9 +907,6 @@ }; &pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie4_default>; pinctrl-names = "default"; @@ -648,6 +921,9 @@ }; &pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; @@ -665,9 +941,6 @@ }; &pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&vreg_nvme>; pinctrl-0 = <&pcie6a_default>; @@ -683,6 +956,42 @@ status = "okay"; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + &pmc8380_3_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio4"; @@ -695,6 +1004,17 @@ }; }; +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + &qupv3_0 { status = "okay"; }; @@ -781,6 +1101,12 @@ bias-disable; }; + hdmi_hpd_default: hdmi-hpd-default-state { + pins = "gpio126"; + function = "usb2_dp"; + bias-disable; + }; + kybd_default: kybd-default-state { pins = "gpio67"; function = "gpio"; @@ -840,12 +1166,40 @@ }; }; + rtmr1_default: rtmr1-reset-n-active-state { + pins = "gpio176"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + tpad_default: tpad-default-state { pins = "gpio3"; function = "gpio"; bias-disable; }; + usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state { + pins = "gpio188"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state { + pins = "gpio175"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state { + pins = "gpio186"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + wcn_bt_en: wcn-bt-en-state { pins = "gpio116"; function = "gpio"; @@ -914,7 +1268,7 @@ }; &usb_1_ss0_qmpphy_out { - remote-endpoint = <&pmic_glink_ss0_ss_in>; + remote-endpoint = <&retimer_ss0_ss_in>; }; &usb_1_ss1_hsphy { @@ -946,7 +1300,35 @@ }; &usb_1_ss1_qmpphy_out { - remote-endpoint = <&pmic_glink_ss1_ss_in>; + remote-endpoint = <&retimer_ss1_ss_in>; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; + + ports { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + /delete-node/ endpoint; + + usb_1_ss2_qmpphy_out_dp: endpoint@0 { + reg = <0>; + + data-lanes = <3 2 1 0>; + remote-endpoint = <&hdmi_bridge_dp_in>; + }; + + /* No USB3 lanes connected */ + }; + }; }; &usb_2 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts index 0408ade7150f..b42318c75ed2 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts @@ -82,6 +82,9 @@ }; &pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 2f533e56c8c8..4c95b1af2c64 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -941,9 +941,6 @@ }; &pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie4_default>; pinctrl-names = "default"; @@ -958,6 +955,9 @@ }; &pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; @@ -975,9 +975,6 @@ }; &pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&vreg_nvme>; pinctrl-0 = <&pcie6a_default>; @@ -993,6 +990,11 @@ status = "okay"; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + &pm8550_gpios { rtmr0_default: rtmr0-reset-n-active-state { pins = "gpio10"; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index 4c31d14a07bc..d6472e5a3f9f 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -1160,9 +1160,6 @@ }; &pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&vreg_nvme>; pinctrl-0 = <&pcie6a_default>; @@ -1178,6 +1175,11 @@ status = "okay"; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + &pm8550_gpios { rtmr0_default: rtmr0-reset-n-active-state { pins = "gpio10"; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts b/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts new file mode 100644 index 000000000000..20a33e6f27ee --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts @@ -0,0 +1,1515 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2025 TUXEDO Computers GmbH + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" + +/* + * This device tree also works for the TUXEDO Elite 14 Gen1 notebook + * prototype. + */ + +/ { + model = "Medion SPRCHRGD 14 S1"; + compatible = "medion,sprchrgd14s1", "qcom,x1e78100", "qcom,x1e80100"; + + aliases { + serial0 = &uart21; + serial1 = &uart14; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9385-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_int_n_default>; + pinctrl-names = "default"; + + switch-lid { + gpios = <&tlmm 92 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + }; + }; + + hdmi-bridge { + compatible = "asl-tek,cs5263"; + + pinctrl-0 = <&hdmi_hpd_default>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_dp_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_tmds_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_bridge_tmds_out>; + }; + }; + }; + + pmic-glink { + compatible = "qcom,x1e80100-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_ss0_hs_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss0_ss_in: endpoint { + remote-endpoint = <&retimer_ss0_ss_out>; + }; + }; + port@2 { + reg = <2>; + + pmic_glink_ss0_con_sbu_in: endpoint { + remote-endpoint = <&retimer_ss0_con_sbu_out>; + }; + }; + }; + }; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VREG_NVME_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&nvme_reg_en>; + pinctrl-names = "default"; + regulator-boot-on; + }; + + vreg_rtmr0_1p15: regulator-rtmr0-1p15 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + + gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_pwr_1p15_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_1p8: regulator-rtmr0-1p8 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_1P8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_1p8_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vreg_rtmr0_3p3: regulator-rtmr0-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_RTMR0_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&usb0_3p3_reg_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + /* + * TODO: These two regulators are actually part of the removable M.2 + * card and not the mainboard. Need to describe this differently. + * Functionally it works correctly, because all we need to do is to + * turn on the actual 3.3V supply above. + */ + vreg_wcn_0p95: regulator-wcn-0p95 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_0P95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_1p9: regulator-wcn-1p9 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_1P9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + + vin-supply = <&vreg_wcn_3p3>; + }; + + vreg_wcn_3p3: regulator-wcn-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_WCN_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&wcn_sw_en>; + pinctrl-names = "default"; + + regulator-boot-on; + }; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-MEDION-SPRCHRGD-14-S1"; + audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT", + "TweeterLeft IN", "WSA WSA_SPK2 OUT", + "WooferRight IN", "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "TX SWR_INPUT1", "ADC2_OUTPUT"; + + displayport-0-dai-link { + link-name = "DisplayPort0 Playback"; + + codec { + sound-dai = <&mdss_dp0>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + displayport-2-dai-link { + link-name = "DisplayPort2 Playback"; + + codec { + sound-dai = <&mdss_dp2>; + }; + + cpu { + sound-dai = <&q6apmbedai DISPLAY_PORT_RX_2>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + + codec { + sound-dai = <&lpass_vamacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + codec { + sound-dai = <&left_woofer>, <&left_tweeter>, + <&swr0 0>, <&lpass_wsamacro 0>, + <&right_woofer>, <&right_tweeter>, + <&swr3 0>, <&lpass_wsa2macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + }; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_wlan_bt_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_l1j_0p9: ldo1 { + regulator-name = "vreg_l1j_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/x1e80100/Medion/sprchrgd-14-s1/qcdxkmsuc8380.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + + status = "okay"; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&tpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&kybd_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + + status = "okay"; + + typec-mux@8 { + compatible = "parade,ps8830"; + reg = <0x8>; + + clocks = <&rpmhcc RPMH_RF_CLK3>; + + vdd33-supply = <&vreg_rtmr0_3p3>; + vdd33-cap-supply = <&vreg_rtmr0_3p3>; + + vddio-supply = <&vreg_rtmr0_1p8>; + + vdd-supply = <&vreg_rtmr0_1p15>; + vddar-supply = <&vreg_rtmr0_1p15>; + vddat-supply = <&vreg_rtmr0_1p15>; + + reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&rtmr0_default>; + pinctrl-names = "default"; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + retimer_ss0_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + retimer_ss0_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + retimer_ss0_con_sbu_out: endpoint { + remote-endpoint = <&pmic_glink_ss0_con_sbu_in>; + }; + }; + }; + }; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + eusb5_repeater: redriver@43 { + compatible = "nxp,ptn3222"; + reg = <0x43>; + #phy-cells = <0>; + + vdd1v8-supply = <&vreg_l4b_1p8>; + vdd3v3-supply = <&vreg_l13b_3p0>; + + reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb5_reset_n>; + pinctrl-names = "default"; + }; + + eusb3_repeater: redriver@47 { + compatible = "nxp,ptn3222"; + reg = <0x47>; + #phy-cells = <0>; + + vdd1v8-supply = <&vreg_l4b_1p8>; + vdd3v3-supply = <&vreg_l13b_3p0>; + + reset-gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb3_reset_n>; + pinctrl-names = "default"; + }; + + eusb6_repeater: redriver@4f { + compatible = "nxp,ptn3222"; + reg = <0x4f>; + #phy-cells = <0>; + + vdd1v8-supply = <&vreg_l4b_1p8>; + vdd3v3-supply = <&vreg_l13b_3p0>; + + reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&eusb6_reset_n>; + pinctrl-names = "default"; + }; +}; + +&iris { + firmware-name = "qcom/x1e80100/Medion/sprchrgd-14-s1/qcvss8380.mbn"; + + status = "okay"; +}; + +&lpass_tlmm { + spkr_01_sd_n_active: spkr-01-sd-n-active-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_23_sd_n_active: spkr-23-sd-n-active-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; +}; + +&lpass_vamacro { + pinctrl-0 = <&dmic01_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_l1b_1p8>; + qcom,dmic-sample-rate = <4800000>; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + sound-name-prefix = "DisplayPort0"; + + status = "okay"; +}; + +&mdss_dp0_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp2 { + sound-name-prefix = "DisplayPort2"; + + status = "okay"; +}; + +&mdss_dp2_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + +&mdss_dp3 { + /delete-property/ #sound-dai-cells; + + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + power-supply = <&vreg_edp_3p3>; + + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_dp3_out>; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&edp_panel_in>; + }; + }; + }; +}; + +&mdss_dp3_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3j_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + }; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&pm8550_gpios { + rtmr0_default: rtmr0-reset-n-active-state { + pins = "gpio10"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; + + usb0_3p3_reg_en: usb0-3p3-reg-en-state { + pins = "gpio11"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pm8550ve_9_gpios { + usb0_1p8_reg_en: usb0-1p8-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&pmc8380_5_gpios { + usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; /* 1.8V */ + bias-disable; + input-disable; + output-enable; + }; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/Medion/sprchrgd-14-s1/qcadsp8380.mbn", + "qcom/x1e80100/Medion/sprchrgd-14-s1/adsp_dtbs.elf"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/Medion/sprchrgd-14-s1/qccdsp8380.mbn", + "qcom/x1e80100/Medion/sprchrgd-14-s1/cdsp_dtbs.elf"; + + status = "okay"; +}; + +&smb2360_0 { + status = "okay"; +}; + +&smb2360_0_eusb2_repeater { + vdd18-supply = <&vreg_l3d_1p8>; + vdd3-supply = <&vreg_l2b_3p0>; +}; + +&swr0 { + status = "okay"; + + pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Left Woofer */ + left_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Left Tweeter */ + left_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9385 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9385 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + +&swr3 { + status = "okay"; + + pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-names = "default"; + + /* WSA8845, Right Woofer */ + right_woofer: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "WooferRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <1 2 3 7 10 13>; + }; + + /* WSA8845, Right Tweeter */ + right_tweeter: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "TweeterRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l12b_1p2>; + qcom,port-mapping = <4 5 6 7 11 13>; + }; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + eusb3_reset_n: eusb3-reset-n-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + eusb6_reset_n: eusb6-reset-n-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + eusb5_reset_n: eusb5-reset-n-state { + pins = "gpio184"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hall_int_n_default: hall-int-n-state { + pins = "gpio92"; + function = "gpio"; + bias-disable; + }; + + hdmi_hpd_default: hdmi-hpd-default-state { + pins = "gpio126"; + function = "usb2_dp"; + bias-disable; + }; + + kybd_default: kybd-default-state { + pins = "gpio67"; + function = "gpio"; + bias-disable; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + tpad_default: tpad-default-state { + pins = "gpio3"; + function = "gpio"; + bias-disable; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio191"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + wcn_sw_en: wcn-sw-en-state { + pins = "gpio214"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcn_wlan_bt_en: wcn-wlan-bt-en-state { + pins = "gpio116", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + max-speed = <3200000>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + }; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + phys = <&smb2360_0_eusb2_repeater>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p9>; + + status = "okay"; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "host"; +}; + +&usb_1_ss0_dwc3_hs { + remote-endpoint = <&pmic_glink_ss0_hs_in>; +}; + +&usb_1_ss0_qmpphy_out { + remote-endpoint = <&retimer_ss0_ss_in>; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; + + ports { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + /delete-node/ endpoint; + + usb_1_ss2_qmpphy_out_dp: endpoint@0 { + reg = <0>; + + data-lanes = <3 2 1 0>; + remote-endpoint = <&hdmi_bridge_dp_in>; + }; + + /* No USB3 lanes connected */ + }; + }; +}; + +/* Camera */ +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb5_repeater>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +/* Right side USB-A (eUSB 3) */ +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb3_repeater>; + + status = "okay"; +}; + +/* Left side USB-A (eUSB 6) */ +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + phys = <&eusb6_repeater>; + + status = "okay"; +}; + +/* Right side USB-A (USB-SS 3) */ +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; + +/* Left side USB-A (USB-SS 4) */ +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p9>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-denali-oled.dts b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-denali-oled.dts new file mode 100644 index 000000000000..07ce43ccf394 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-denali-oled.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Dale Whinham <daleyo@gmail.com> + */ + +/dts-v1/; + +#include "hamoa.dtsi" +#include "x1-microsoft-denali.dtsi" + +/ { + model = "Microsoft Surface Pro 11th Edition (OLED)"; + compatible = "microsoft,denali-oled", "microsoft,denali", + "qcom,x1e80100"; +}; + +&panel { + compatible = "samsung,atna30dw01", "samsung,atna33xc20"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi index 7e1e808ea983..37539a09b76e 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -1094,9 +1094,6 @@ }; &pcie3 { - perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie3_default>; pinctrl-names = "default"; @@ -1112,6 +1109,11 @@ status = "okay"; }; +&pcie3_port0 { + reset-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; +}; + &pcie4 { status = "okay"; }; @@ -1124,6 +1126,9 @@ }; &pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; @@ -1141,9 +1146,6 @@ }; &pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&vreg_nvme>; pinctrl-0 = <&pcie6a_default>; @@ -1159,6 +1161,11 @@ status = "okay"; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + &pm8550_gpios { rtmr0_default: rtmr0-reset-n-active-state { pins = "gpio10"; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index b742aabd9c04..1d402ef86512 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -979,8 +979,6 @@ &pcie3 { pinctrl-names = "default"; pinctrl-0 = <&pcie3_default>; - perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -992,16 +990,16 @@ status = "okay"; }; -&pcie3_port { +&pcie3_port0 { vpcie12v-supply = <&vreg_pcie_12v>; vpcie3v3-supply = <&vreg_pcie_3v3>; vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>; + + reset-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; }; &pcie4 { - perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie4_default>; pinctrl-names = "default"; @@ -1016,6 +1014,9 @@ }; &pcie4_port0 { + reset-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; @@ -1033,9 +1034,6 @@ }; &pcie6a { - perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&vreg_nvme>; pinctrl-names = "default"; @@ -1051,6 +1049,11 @@ status = "okay"; }; +&pcie6a_port0 { + reset-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; +}; + &qupv3_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts index 3186e79e862d..1e5eb8c5dc98 100644 --- a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts +++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts @@ -78,6 +78,47 @@ vdd-supply = <&vreg_cam_5p0>; }; + hdmi-bridge { + compatible = "realtek,rtd2171"; + + enable-gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&hdmi_hpd_default>; + pinctrl-names = "default"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_bridge_dp_in: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_out_dp>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_bridge_tmds_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_bridge_tmds_out>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -1038,6 +1079,14 @@ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; +&mdss_dp2 { + status = "okay"; +}; + +&mdss_dp2_out { + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; +}; + &mdss_dp3 { /delete-property/ #sound-dai-cells; @@ -1327,6 +1376,19 @@ bias-disable; }; + hdmi_bridge_en: hdmi-bridge-en-state { + pins = "gpio120"; + function = "gpio"; + drive-strength = <16>; + bias-pull-down; + }; + + hdmi_hpd_default: hdmi-hpd-default-state { + pins = "gpio126"; + function = "usb2_dp"; + bias-disable; + }; + kybd_default: kybd-default-state { pins = "gpio67"; function = "gpio"; @@ -1560,6 +1622,8 @@ maximum-speed = "high-speed"; phys = <&usb_1_ss2_hsphy>; phy-names = "usb2-phy"; + + /delete-property/ port@1; }; &usb_1_ss2_hsphy { @@ -1571,6 +1635,32 @@ status = "okay"; }; +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + /delete-property/ mode-switch; + /delete-property/ orientation-switch; + + status = "okay"; + + ports { + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + /delete-node/ endpoint; + + usb_1_ss2_qmpphy_out_dp: endpoint@0 { + reg = <0>; + + data-lanes = <0 1 2 3>; + remote-endpoint = <&hdmi_bridge_dp_in>; + }; + }; + }; +}; + &usb_2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/x1p64100-microsoft-denali.dts b/arch/arm64/boot/dts/qcom/x1p64100-microsoft-denali.dts new file mode 100644 index 000000000000..d96202e2afc6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1p64100-microsoft-denali.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Dale Whinham <daleyo@gmail.com> + */ + +/dts-v1/; + +#include "hamoa.dtsi" +#include "x1-microsoft-denali.dtsi" + +/ { + model = "Microsoft Surface Pro 11th Edition (LCD)"; + compatible = "microsoft,denali-lcd", "microsoft,denali", + "qcom,x1p64100", "qcom,x1e80100"; +}; diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 1a6f85e463e0..ff0f7101dfe2 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -2005,6 +2005,7 @@ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { { .compatible = "lenovo,thinkpad-t14s" }, { .compatible = "lenovo,thinkpad-x13s", }, { .compatible = "lenovo,yoga-slim7x" }, + { .compatible = "medion,sprchrgd14s1" }, { .compatible = "microsoft,arcata", }, { .compatible = "microsoft,blackrock" }, { .compatible = "microsoft,romulus13", }, diff --git a/include/dt-bindings/clock/qcom,gcc-msm8917.h b/include/dt-bindings/clock/qcom,gcc-msm8917.h index 4e3897b3669d..4265460bfb30 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8917.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8917.h @@ -194,6 +194,7 @@ #define GCC_QUSB2_PHY_BCR 2 #define GCC_USB_HS_BCR 3 #define GCC_USB2_HS_PHY_ONLY_BCR 4 +#define GCC_MDSS_BCR 5 /* GDSCs */ #define CPP_GDSC 0 diff --git a/include/dt-bindings/clock/qcom,x1e80100-gcc.h b/include/dt-bindings/clock/qcom,x1e80100-gcc.h index 62aa12425592..d905804e6465 100644 --- a/include/dt-bindings/clock/qcom,x1e80100-gcc.h +++ b/include/dt-bindings/clock/qcom,x1e80100-gcc.h @@ -387,6 +387,9 @@ #define GCC_USB4_2_PHY_RX0_CLK_SRC 377 #define GCC_USB4_2_PHY_RX1_CLK_SRC 378 #define GCC_USB4_2_PHY_SYS_CLK_SRC 379 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 380 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 381 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 382 /* GCC power domains */ #define GCC_PCIE_0_TUNNEL_GDSC 0 |