diff options
| author | Antoni Pokusinski <apokusinski01@gmail.com> | 2025-12-11 19:58:42 +0100 |
|---|---|---|
| committer | Guenter Roeck <linux@roeck-us.net> | 2026-01-31 07:38:31 -0800 |
| commit | 1fe80112e4a151d3184a702412b7be0bcd819dab (patch) | |
| tree | ecee08f7ff574e82f076b9eaecf946ee5b7fae93 | |
| parent | af7e57d444141ac9e77b57296d59c3e965c4c4fa (diff) | |
hwmon: (sht3x) add support for SHT85
SHT85 is a temperature and humidity sensor with the same interface
as SHT3x.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Link: https://lore.kernel.org/r/20251211185842.66084-1-apokusinski01@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| -rw-r--r-- | Documentation/hwmon/sht3x.rst | 18 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/hwmon/sht3x.c | 1 |
3 files changed, 16 insertions, 7 deletions
diff --git a/Documentation/hwmon/sht3x.rst b/Documentation/hwmon/sht3x.rst index 9585fa7c5a5d..ea1642920295 100644 --- a/Documentation/hwmon/sht3x.rst +++ b/Documentation/hwmon/sht3x.rst @@ -23,6 +23,14 @@ Supported chips: - https://sensirion.com/media/documents/1DA31AFD/61641F76/Sensirion_Temperature_Sensors_STS3x_Datasheet.pdf - https://sensirion.com/media/documents/292A335C/65537BAF/Sensirion_Datasheet_STS32_STS33.pdf + * Sensirion SHT85 + + Prefix: 'sht85' + + Addresses scanned: none + + Datasheet: https://sensirion.com/media/documents/4B40CEF3/640B2346/Sensirion_Humidity_Sensors_SHT85_Datasheet.pdf + Author: - David Frey <david.frey@sensirion.com> @@ -31,15 +39,15 @@ Author: Description ----------- -This driver implements support for the Sensirion SHT3x-DIS and STS3x-DIS +This driver implements support for the Sensirion SHT3x-DIS, STS3x-DIS and SHT85 series of humidity and temperature sensors. Temperature is measured in degrees celsius, relative humidity is expressed as a percentage. In the sysfs interface, all values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. -The device communicates with the I2C protocol. Sensors can have the I2C -addresses 0x44 or 0x45 (0x4a or 0x4b for sts3x), depending on the wiring. See -Documentation/i2c/instantiating-devices.rst for methods to instantiate the -device. +The device communicates with the I2C protocol. SHT3x sensors can have the I2C +addresses 0x44 or 0x45 (0x4a or 0x4b for sts3x), depending on the wiring. SHT85 +address is 0x44 and is fixed. See Documentation/i2c/instantiating-devices.rst for +methods to instantiate the device. Even if sht3x sensor supports clock-stretch (blocking mode) and non-stretch (non-blocking mode) in single-shot mode, this driver only supports the latter. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 157678b821fc..d9bac1e3057b 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1983,8 +1983,8 @@ config SENSORS_SHT3x depends on I2C select CRC8 help - If you say yes here you get support for the Sensiron SHT30 and SHT31 - humidity and temperature sensors. + If you say yes here you get support for the Sensiron SHT30, SHT31 and + SHT85 humidity and temperature sensors. This driver can also be built as a module. If so, the module will be called sht3x. diff --git a/drivers/hwmon/sht3x.c b/drivers/hwmon/sht3x.c index f36c0229328f..08306ccb6d0b 100644 --- a/drivers/hwmon/sht3x.c +++ b/drivers/hwmon/sht3x.c @@ -933,6 +933,7 @@ static int sht3x_probe(struct i2c_client *client) static const struct i2c_device_id sht3x_ids[] = { {"sht3x", sht3x}, {"sts3x", sts3x}, + {"sht85", sht3x}, {} }; |