| Age | Commit message (Collapse) | Author |
|---|
|
The error path of copying the old config used the wrong variable in the
error message:
$ mkdir /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad
$ chmod 0 /tmp/build
$ ./tools/testing/ktest/config-bisect.pl -b /tmp/build config-good /tmp/config-bad good
cp /tmp/build//.config config-good.tmp ... [0 seconds] FAILED!
Use of uninitialized value $config in concatenation (.) or string at ./tools/testing/ktest/config-bisect.pl line 744.
failed to copy to config-good.tmp
When it should have shown:
failed to copy /tmp/build//.config to config-good.tmp
Cc: stable@vger.kernel.org
Cc: John 'Warthog9' Hawley <warthog9@kernel.org>
Fixes: 0f0db065999cf ("ktest: Add standalone config-bisect.pl program")
Link: https://patch.msgid.link/20251203180924.6862bd26@gandalf.local.home
Reported-by: "John W. Krahn" <jwkrahn@shaw.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Support both paths where tracefs is typically mounted in selftests
- Make old_sympos 0 and 1 equal. They both are valid when there is only
one symbol with the given name.
* tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: use canonical ftrace path
livepatch: Match old_sympos 0 and 1 in klp_find_func()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Improve recovery from misbehaving BPF schedulers.
When a scheduler puts many tasks with varying affinity restrictions
on a shared DSQ, CPUs scanning through tasks they cannot run can
overwhelm the system, causing lockups.
Bypass mode now uses per-CPU DSQs with a load balancer to avoid this,
and hooks into the hardlockup detector to attempt recovery.
Add scx_cpu0 example scheduler to demonstrate this scenario.
- Add lockless peek operation for DSQs to reduce lock contention for
schedulers that need to query queue state during load balancing.
- Allow scx_bpf_reenqueue_local() to be called from anywhere in
preparation for deprecating cpu_acquire/release() callbacks in favor
of generic BPF hooks.
- Prepare for hierarchical scheduler support: add
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs,
make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in
structs for future aux__prog parameter.
- Implement cgroup_set_idle() callback to notify BPF schedulers when a
cgroup's idle state changes.
- Fix migration tasks being incorrectly downgraded from
stop_sched_class to rt_sched_class across sched_ext enable/disable.
Applied late as the fix is low risk and the bug subtle but needs
stable backporting.
- Various fixes and cleanups including cgroup exit ordering,
SCX_KICK_WAIT reliability, and backward compatibility improvements.
* tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits)
sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks
sched_ext: tools: Removing duplicate targets during non-cross compilation
sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object
sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs
sched_ext: Update comments replacing breather with aborting mechanism
sched_ext: Implement load balancer for bypass mode
sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked()
sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR
sched_ext: Add scx_cpu0 example scheduler
sched_ext: Hook up hardlockup detector
sched_ext: Make handle_lockup() propagate scx_verror() result
sched_ext: Refactor lockup handlers into handle_lockup()
sched_ext: Make scx_exit() and scx_vexit() return bool
sched_ext: Exit dispatch and move operations immediately when aborting
sched_ext: Simplify breather mechanism with scx_aborting flag
sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
sched_ext: Refactor do_enqueue_task() local and global DSQ paths
sched_ext: Use shorter slice in bypass mode
sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races
sched_ext: Minor cleanups to scx_task_iter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
|
|
Remove parentheses around assert statements in Python. With parentheses,
assert always evaluates to True, making the checks ineffective.
Signed-off-by: Maurice Hieronymus <mhi@mailbox.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
|
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
|
|
Setup qemu with KVM then run kvm stat and some host
recording/reporting/build-id tests.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add test that evlist reports expected events from perf record.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Compile a simple dlfilter and make sure it remove samples from
everything other than a test_loop.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add test that kallsyms finds a well known symbol and fails for
another.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Basic coverage for `perf timechart` doing a record and then a basic
sanity test of the generated SVG file.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The test starts a backgroup thloop workload and monitors it using
cpu-clock ensuring test_loop appears in the output.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add testing for the purge and remove commands. Use the noploop
workload rather than just a return to avoid missing samples in the
workload in perf record. Tidy up the cleanup code to cleanup when
signals happen.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add basic c2c record and report testing to gain some coverage.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To deal with histogram code that had missing gets the c2c code had
some defensive gets. Those other issues were cleaned up by the
reference count checker, clean them up for the c2c command here.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Reference count checking caught a missing dso__put following a
machine__findnew_dso_id.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Reference count checking found the online CPU map was being gotten but
not put. Add in the missing put.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than exit the internal map_symbols directly, put the mem-info
that does this and also lowers the reference count on the mem-info
itself otherwise the mem-info is being leaked.
Fixes: 56e144fe98260a0f ("perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Move nsinfo__zput from cleanup_perf_probe_events to
clear_perf_probe_event so it is always executed. Clean up
clear_perf_probe_events to not call nsinfo__zput and use the pev
variable to avoid repeated array accesses.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add missing dso__put for the dso created in maps__split_kallsyms.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In dso__process_kernel_symbol if inserting a map fails, probably
ENOMEM, then the reference count puts were missing on the dso and map.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The '-o' option exists for the SVG creation but not for `perf
timechart record`. Add to better allow testing.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are 2 slots left for kvm_add_default_arch_event, fix the
assertion so that debug builds don't fail the assert and to agree with
the comment.
Fixes: 45ff39f6e70aa55d0 ("perf tools kvm: Fix the potential out of range memory access issue")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/445e38f5128592f8b5c38da30267fff025e37613
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/6edacf434dffa046435de2f6a182c00df3cf4edc
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/348f33fae477f281812c32e1c07812b7e35614dd
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/09a0c74b23b5d20adf1f97e5022856568d05494c
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/dc6ffee20c74bfd21d7a7e338345578d4b7ca9ca
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/b4acc3fd520eb098db41083010b65b75ae906c96
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated metrics were published in:
https://github.com/intel/perfmon/pull/348/commits/2dce436130ddfb8b442fc373d103f970de26cb78
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/588dd77675039e1aaacee27a414cbcf3625c58a3
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The updated events were published in:
https://github.com/intel/perfmon/commit/c74f1cefa94d224cb3338507961b59d8a2a1c4e9
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add the following CPU variants to the list for data source decoding:
- Cortex-A715 [1]
- Cortex-A78C [2]
- Cortex-X1 [3]
- Cortex-X4 [4]
- Neoverse V3 [5]
[1] https://developer.arm.com/documentation/101590/0103/Statistical-Profiling-Extension-Support/Statistical-Profiling-Extension-data-source-packet
[2] https://developer.arm.com/documentation/102226/0002/Debug-descriptions/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
[3] https://developer.arm.com/documentation/101433/0102/Debug-descriptions/Statistical-Profiling-Extension/implementation-defined-features-of-SPE
[4] https://developer.arm.com/documentation/102484/0003/Statistical-Profiling-Extension-support/Statistical-Profiling-Extension-data-source-packet
[5] https://developer.arm.com/documentation/107734/0002/Statistical-Profiling-Extension-support/Statistical-Profiling-Extension-data-source-packet
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In 754187ad73b73bcb ("perf build: Remove NO_AUXTRACE build option")
sys/types.h was removed, which broke the build in all Alpine Linux
releases, as musl libc has pid_t defined via sys/types.h, add it back.
Fixes: 754187ad73b73bcb ("perf build: Remove NO_AUXTRACE build option")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
overflows
When the kernel build fails due to an objtool segfault, the error
message is a bit obtuse and confusing:
make[5]: *** [scripts/Makefile.build:503: drivers/scsi/qla2xxx/qla2xxx.o] Error 139
^^^^^^^^^
make[5]: *** Deleting file 'drivers/scsi/qla2xxx/qla2xxx.o'
make[4]: *** [scripts/Makefile.build:556: drivers/scsi/qla2xxx] Error 2
make[3]: *** [scripts/Makefile.build:556: drivers/scsi] Error 2
make[2]: *** [scripts/Makefile.build:556: drivers] Error 2
make[1]: *** [/home/jpoimboe/git/linux/Makefile:2013: .] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Add a signal handler to objtool which prints an error message like if
the local stack has overflown (for which there's a chance as objtool
makes heavy use of recursion):
drivers/scsi/qla2xxx/qla2xxx.o: error: SIGSEGV: objtool stack overflow!
or:
drivers/scsi/qla2xxx/qla2xxx.o: error: SIGSEGV: objtool crash!
Also, re-raise the signal so the core dump still gets triggered.
[ mingo: Applied a build fix, added more comments and prettified the code. ]
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/mi4tihk4dbncn7belrhp6ooudhpw4vdggerktu5333w3gqf3uf@vqlhc3y667mg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- Preparations to the use of nolibc in UML:
- Cleanup of sparse warnings
- Library mode without _start()
- More consistency when disabling errno
- Unconditional installation of all architecture support files
- Always 64-bit wide ino_t and off_t
- Various cleanups and bug fixes
* tag 'nolibc-20251130-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (25 commits)
selftests/nolibc: error out on linker warnings
selftests/nolibc: use lld to link loongarch binaries
tools/nolibc: remove more __nolibc_enosys() fallbacks
tools/nolibc: remove now superfluous overflow check in llseek
tools/nolibc: use 64-bit off_t
tools/nolibc: prefer the llseek syscall
tools/nolibc: handle 64-bit off_t for llseek
tools/nolibc: use 64-bit ino_t
tools/nolibc: avoid using plain integer as NULL pointer
tools/nolibc: add support for fchdir()
tools/nolibc: clean up outdated comments in generic arch.h
tools/nolibc: make the "headers" target install all supported archs
tools/nolibc: add the more portable inttypes.h
tools/nolibc: provide the portable sys/select.h
tools/nolibc: add missing memchr() to string.h
tools/nolibc: fix misleading help message regarding installation path
tools/nolibc: add uio.h with readv and writev
tools/nolibc: add option to disable runtime
tools/nolibc: use __fallthrough__ rather than fallthrough
tools/nolibc: implement %m if errno is not defined
...
|
|
This version includes the following changes:
- Check feature status to check if the feature enablement was successful
- Reset SST-TF bucket structure to display valid bucket info
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
buckets
With SST-TF version 2 only 3 buckets are present. The information in
others buckets can be junk. So initialize the info structure of type
isst_turbo_freq_info, before issing ioctl to get bucket information.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
After change of enable/disable status of SST-CP, SST-TF and SST-BF
check if the hardware status change was successful. If not successful
even after retries, return failure.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Create a fake root directory for /proc/{version,modules,kallsyms} in
/tmp for testing. The kallsyms has a bad symbol in the module and it
causes the main map splitted. The test ensures it only has two maps -
kernel and the module and it finds the initial map after the module
without creating the split maps like [kernel].0 and so on.
$ perf test -vv "split kallsyms"
69: split kallsyms:
--- start ---
test child forked, pid 1016196
try to create fake root directory
create kernel maps from the fake root directory
maps__set_modules_path_dir: cannot open /tmp/perf-test.Zrv6Sy/lib/modules/X.Y.Z dir
Problems setting modules path maps, continuing anyway...
Failed to open /tmp/perf-test.Zrv6Sy/proc/kcore. Note /proc/kcore requires CAP_SYS_RAWIO capability to access.
Using /tmp/perf-test.Zrv6Sy/proc/kallsyms for symbols
kernel map loaded - check symbol and map
---- end(0) ----
69: split kallsyms : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This is for test functions to find the kallsyms correctly. It can find
the machine from the kernel maps and use its root_dir. This is helpful
to setup fake /proc directory for testing.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In maps__split_kallsyms(), it assumes new kernel map when it finds a
symbol without module after any module and the initial kernel map has
some symbols. Because it expects modules are out of the kernel map so
modules should not have symbols in the kernel map.
For example, the following memory map shows symbols and maps. Any
symbols in the module 1 area will go to the module 1. The main kernel
map starts at 0xffffffffbc200000. But if any symbol has a module
between the symbols in that area, next symbols after 0xffffffffbd008000
will generate new kernel maps like [kernel].1.
kernel address | |
| |
0xffffffffc0000000 |---------------------|
| (symbols) |
| ... | <--- [kernel].N
0xffffffffbc400000 |---------------------|
| (symbols) |
| module 2 | <--- bad?
0xffffffffbc380000 |---------------------|
| ... |
| (symbols) |
| [kernel.kallsyms] | <--- initial map
0xffffffffbc200000 |---------------------|
| |
| |
0xffffffffabcde000 |---------------------|
| (symbols) |
| module 1 |
0xffffffffabcd0000 |---------------------|
This is very fragile when the module has a symbol that falls into the
main kernel map for some reason. My system has a livepatch module with
such symbols. And it created a lot of new kernel maps after those
symbols. But the symbol may have broken addresses and the later symbols
can still be found in the initial kernel map.
Let's check the symbol address in the initial map and use it if found.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It's counted twice as it's increased after calling maps__insert(). I
guess we want to increase it only after it's added properly.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The maps__split_kallsyms() will split symbols to module DSOs if it comes
from a module. It also handled some unusual kernel symbols after modules
by creating new kernel maps like "[kernel].0".
But they are pseudo DSOs to have those unexpected symbols. They should
not be considered as unloaded kernel DSOs. Otherwise the dso__load()
for them will end up calling dso__load_kallsyms() and then
maps__split_kallsyms() again and again.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 2e538c4a1847291cf ("perf tools: Improve kernel/modules symbol lookup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It's possible that some kernel samples don't have matching deferred
callchain records when the profiling session was ended before the
threads came back to userspace. Let's flush the samples before
finish the session.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Save samples with deferred callchains in a separate list and deliver
them after merging the user callchains. If users don't want to merge
they can set tool->merge_deferred_callchains to false to prevent the
behavior.
With previous result, now perf script will show the merged callchains.
$ perf script
...
pwd 2312 121.163435: 249113 cpu/cycles/P:
ffffffff845b78d8 __build_id_parse.isra.0+0x218 ([kernel.kallsyms])
ffffffff83bb5bf6 perf_event_mmap+0x2e6 ([kernel.kallsyms])
ffffffff83c31959 mprotect_fixup+0x1e9 ([kernel.kallsyms])
ffffffff83c31dc5 do_mprotect_pkey+0x2b5 ([kernel.kallsyms])
ffffffff83c3206f __x64_sys_mprotect+0x1f ([kernel.kallsyms])
ffffffff845e6692 do_syscall_64+0x62 ([kernel.kallsyms])
ffffffff8360012f entry_SYSCALL_64_after_hwframe+0x76 ([kernel.kallsyms])
7f18fe337fa7 mprotect+0x7 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe330e0f _dl_sysdep_start+0x7f (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe331448 _dl_start_user+0x0 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
...
The old output can be get using --no-merge-callchain option.
Also perf report can get the user callchain entry at the end.
$ perf report --no-children --stdio -q -S __build_id_parse.isra.0
# symbol: __build_id_parse.isra.0
8.40% pwd [kernel.kallsyms]
|
---__build_id_parse.isra.0
perf_event_mmap
mprotect_fixup
do_mprotect_pkey
__x64_sys_mprotect
do_syscall_64
entry_SYSCALL_64_after_hwframe
mprotect
_dl_sysdep_start
_dl_start_user
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Handle the deferred callchains in the script output.
$ perf script
...
pwd 2312 121.163435: 249113 cpu/cycles/P:
ffffffff845b78d8 __build_id_parse.isra.0+0x218 ([kernel.kallsyms])
ffffffff83bb5bf6 perf_event_mmap+0x2e6 ([kernel.kallsyms])
ffffffff83c31959 mprotect_fixup+0x1e9 ([kernel.kallsyms])
ffffffff83c31dc5 do_mprotect_pkey+0x2b5 ([kernel.kallsyms])
ffffffff83c3206f __x64_sys_mprotect+0x1f ([kernel.kallsyms])
ffffffff845e6692 do_syscall_64+0x62 ([kernel.kallsyms])
ffffffff8360012f entry_SYSCALL_64_after_hwframe+0x76 ([kernel.kallsyms])
b00000006 (cookie) ([unknown])
pwd 2312 121.163447: DEFERRED CALLCHAIN [cookie: b00000006]
7f18fe337fa7 mprotect+0x7 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe330e0f _dl_sysdep_start+0x7f (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
7f18fe331448 _dl_start_user+0x0 (/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2)
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a new callchain record mode option for deferred callchains. For now
it only works with FP (frame-pointer) mode.
And add the missing feature detection logic to clear the flag on old
kernels.
$ perf record --call-graph fp,defer -vv true
...
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CALLCHAIN|PERIOD
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
defer_callchain 1
defer_output 1
------------------------------------------------------------
sys_perf_event_open: pid 162755 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -22
switching off deferred callchain support
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
