| Age | Commit message (Collapse) | Author |
|---|
|
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes: 3d3a04fad25a ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic
KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't
require a new capability, and so that developers aren't tempted to bundle
multiple flags into a single capability.
Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit
value, but that limitation can be easily circumvented by adding e.g.
KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more
than 32 flags.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add bpf_wq selftests to verify:
* BPF program using non-constant offset of struct bpf_wq is rejected
* BPF program using map with no BTF for storing struct bpf_wq is rejected
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251010164606.147298-2-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds new selftests in the direct packet access suite, to
cover the non-linear case. The first six tests cover the behavior of
the bounds check with a non-linear skb. The last test adds a call to
bpf_skb_pull_data() to be able to access the packet.
Note that the size of the linear area includes the L2 header, but for
some program types like cgroup_skb, ctx->data points to the L3 header.
Therefore, a linear area of 22 bytes will have only 8 bytes accessible
to the BPF program (22 - ETH_HLEN). For that reason, the cgroup_skb test
cases access the packet at an offset of 8 bytes.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ceedbfd719e58f0d49dcceb8592f5e6bd38ce5fe.1760037899.git.paul.chaignon@gmail.com
|
|
This patch adds support for a new tag __linear_size in the test loader,
to specify the size of the linear area in case of non-linear skbs. If
the tag is absent or null, a linear skb is crafted.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/7ad928ec7591daef4f1b84032aeb86c918b3e5a7.1760037899.git.paul.chaignon@gmail.com
|
|
Add test to verify that unpinning hash tables containing internal timer
structures does not trigger context warnings.
Each subtest (timer_prealloc and timer_no_prealloc) can trigger the
context warning when unpinning, but the warning cannot be triggered
twice within a short time interval (a HZ), which is expected behavior.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251008102628.808045-3-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add tests for new kfuncs bpf_strcasestr() and bpf_strncasestr().
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Link: https://lore.kernel.org/r/tencent_4F1A340A8966155C52AA9CBDB68FD221FE0A@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add tests to verify that async callback's sleepable attribute is
correctly determined by the callback type, not the arming program's
context, reflecting its true execution context.
Introduce verifier_async_cb_context.c with tests for all three async
callback primitives: bpf_timer, bpf_wq, and bpf_task_work. Each
primitive is tested when armed from both sleepable (lsm.s/file_open) and
non-sleepable (fentry) programs.
Test coverage:
- bpf_timer callbacks: Verify they are never sleepable, even when armed
from sleepable programs. Both tests should fail when attempting to use
sleepable helper bpf_copy_from_user() in the callback.
- bpf_wq callbacks: Verify they are always sleepable, even when armed
from non-sleepable programs. Both tests should succeed when using
sleepable helpers in the callback.
- bpf_task_work callbacks: Verify they are always sleepable, even when
armed from non-sleepable programs. Both tests should succeed when
using sleepable helpers in the callback.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20251007220349.3852807-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request()
- eth:
- ice: release xa entry on adapter allocation failure
- usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth:
- mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01"
* tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: airoha: Fix loopback mode configuration for GDM2 port
selftests: drv-net: pp_alloc_fail: add necessary optoins to config
selftests: drv-net: pp_alloc_fail: lower traffic expectations
selftests: drv-net: fix linter warnings in pp_alloc_fail
eth: fbnic: fix reporting of alloc_failed qstats
selftests: drv-net: xdp: add test for interface level qstats
selftests: drv-net: xdp: rename netnl to ethnl
eth: fbnic: fix saving stats from XDP_TX rings on close
eth: fbnic: fix accounting of XDP packets
eth: fbnic: fix missing programming of the default descriptor
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
net: pse-pd: tps23881: Fix current measurement scaling
net/mlx5: fix pre-2.40 binutils assembler error
net/mlx5e: Do not fail PSP init on missing caps
net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed
net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
...
|
|
Add kernel config for error injection as needed by pp_alloc_fail.py
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 9da271f825e4 ("selftests: drv-net-hw: add test for memory allocation failures with page pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Send a non-trivial number of packets and make sure that they
are counted correctly in qstats. Per qstats specification
XDP is the first layer of the stack so we should see Rx and Tx
counters go up for packets which went thru XDP.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Test uses "netnl" for the ethtool family which is quite confusing
(one would expect netdev family would use this name).
No functional changes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Extended 'perf annotate' with DWARF type information
(--code-with-type) integration in the TUI, including a 'T'
hotkey to toggle it
- Enhanced 'perf bench mem' with new mmap() workloads and control
over page/chunk sizes
- Fix 'perf stat' error handling to correctly display unsupported
events
- Improved support for Clang cross-compilation
- Refactored LLVM and Capstone disasm for modularity
- Introduced the :X modifier to exclude an event from automatic
regrouping
- Adjusted KVM sampling defaults to use the "cycles" event to prevent
failures
- Added comprehensive support for decoding PowerPC Dispatch Trace Log
(DTL)
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details
- Synchronized Intel PMU events and metrics with TMA 5.1 across
multiple processor generations
- Converted dependencies like libperl and libtracefs to be opt-in
- Handle more Rust symbols in kallsyms ('N', debugging)
- Improve the python binding to allow for python based tools to use
more of the libraries, add a 'ilist' utility to test those new
bindings
- Various 'perf test' fixes
- Kan Liang no longer a perf tools reviewer
* tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (192 commits)
perf tools: Fix arm64 libjvmti build by generating unistd_64.h
perf tests: Don't retest sections in "Object code reading"
perf docs: Document building with Clang
perf build: Support build with clang
perf test coresight: Dismiss clang warning for unroll loop thread
perf test coresight: Dismiss clang warning for thread loop
perf test coresight: Dismiss clang warning for memcpy thread
perf build: Disable thread safety analysis for perl header
perf build: Correct CROSS_ARCH for clang
perf python: split Clang options when invoking Popen
tools build: Align warning options with perf
perf disasm: Remove unused evsel from 'struct annotate_args'
perf srcline: Fallback between addr2line implementations
perf disasm: Make ins__scnprintf() and ins__is_nop() static
perf dso: Clean up read_symbol() error handling
perf dso: Support BPF programs in dso__read_symbol()
perf dso: Move read_symbol() from llvm/capstone to dso
perf llvm: Reduce LLVM initialization
perf check: Add libLLVM feature
perf parse-events: Fix parsing of >30kb event strings
...
|
|
Jakub reported this self test flaking occasionally (fails, but passes on
re-run) on debug kernels.
This is because the test checks for elapsed time to determine if both
connections were established in parallel.
Rework this to no longer depend on timing.
Use busywait helper to check that both sockets have moved to established
state and then query the conntrack engine for the two entries.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250926163318.40d1a502@kernel.org/
Fixes: 117e149e26d1 ("selftests: netfilter: test nat source port clash resolution interaction with tcp early demux")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Jakub reports spurious failure of nft_fib.sh test.
This is caused by a subtle bug inherited when i moved faulty ping
from one test case to another.
nft_fib.sh not only checks that the fib expression matched, it also
records the number of matches and then validates we have the expected
count. When I did this it was under the assumption that we would
have 0 to n matching packets. In case of the failure, the entry has
n+1 matching packets.
This happens because ping_unreachable helper uses "ping -c 1 -w 1",
instead of the intended "-W". -w alters the meaning of -c (count),
namely, its then treated as number of wanted *replies* instead of
"number of packets to send".
So, in some cases, ping -c 1 -w 1 ends up sending two packets which then
makes the test fail due to the higher-than-expected packet count.
Fix the actual bug (s/-w/-W) and also change the error handling:
1. Show the number of expected packets in the error message
2. Always try to delete the key from the set.
Else, later test that makes sure we don't have unexpected keys
in there will always fail as well.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250927090709.0b3cd783@kernel.org/
Fixes: 98287045c979 ("selftests: netfilter: move fib vrf test to nft_fib.sh")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
As reported by Konstantin, sphinx-build -q is a boolean, not an integer.
Fix the code.
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Closes: https://lore.kernel.org/all/871pnepxfy.fsf@trenco.lwn.net/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <cafa10cddce3e5342a66c73f3f51a17fb6c7f5d3.1759851791.git.mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- tools headers: rename missed CONFIG_CFI_CLANG in merge (Carlos
Llamas)
- kconfig: Avoid prompting for transitional symbols
* tag 'hardening-fix1-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
tools headers: kcfi: rename missed CONFIG_CFI_CLANG
kconfig: Avoid prompting for transitional symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library for
user space (Emil Dahl Juhl and Sascha Hauer)"
* tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: lib: thermal: expose thermal_exit symbols
tools: lib: thermal: don't preserve owner in install
tools: lib: thermal: use pkg-config to locate libnl3
thermal: renesas: Fix RZ/G3E fall-out
|
|
Expand the prefault memory selftest to add a regression test for a KVM bug
where KVM's retry logic would result in (breakable) deadlock due to the
memslot deletion waiting on prefaulting to release SRCU, and prefaulting
waiting on the memslot to fully disappear (KVM uses a two-step process to
delete memslots, and KVM x86 retries page faults if a to-be-deleted, a.k.a.
INVALID, memslot is encountered).
To exercise concurrent memslot remove, spawn a second thread to initiate
memslot removal at roughly the same time as prefaulting. Test memslot
removal for all testcases, i.e. don't limit concurrent removal to only the
success case. There are essentially three prefault scenarios (so far)
that are of interest:
1. Success
2. ENOENT due to no memslot
3. EAGAIN due to INVALID memslot
For all intents and purposes, #1 and #2 are mutually exclusive, or rather,
easier to test via separate testcases since writing to non-existent memory
is trivial. But for #3, making it mutually exclusive with #1 _or_ #2 is
actually more complex than testing memslot removal for all scenarios. The
only requirement to let memslot removal coexist with other scenarios is a
way to guarantee a stable result, e.g. that the "no memslot" test observes
ENOENT, not EAGAIN, for the final checks.
So, rather than make memslot removal mutually exclusive with the ENOENT
scenario, simply restore the memslot and retry prefaulting. For the "no
memslot" case, KVM_PRE_FAULT_MEMORY should be idempotent, i.e. should
always fail with ENOENT regardless of how many times userspace attempts
prefaulting.
Pass in both the base GPA and the offset (instead of the "full" GPA) so
that the worker can recreate the memslot.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250924174255.2141847-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit 23ef9d439769 ("kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI")
missed one instance of CONFIG_CFI_CLANG. Rename it to match the original
kernel header. This addresses the following build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/cfi_types.h include/linux/cfi_types.h
Cc: Kees Cook <kees@kernel.org>
Fixes: a5ba183bdeee ("Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20251006225148.1636486-1-cmllamas@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull nfsd updates from Chuck Lever:
"Mike Snitzer has prototyped a mechanism for disabling I/O caching in
NFSD. This is introduced in v6.18 as an experimental feature. This
enables scaling NFSD in /both/ directions:
- NFS service can be supported on systems with small memory
footprints, such as low-cost cloud instances
- Large NFS workloads will be less likely to force the eviction of
server-local activity, helping it avoid thrashing
Jeff Layton contributed a number of fixes to the new attribute
delegation implementation (based on a pending Internet RFC) that we
hope will make attribute delegation reliable enough to enable by
default, as it is on the Linux NFS client.
The remaining patches in this pull request are clean-ups and minor
optimizations. Many thanks to the contributors, reviewers, testers,
and bug reporters who participated during the v6.18 NFSD development
cycle"
* tag 'nfsd-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (42 commits)
nfsd: discard nfserr_dropit
SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it
NFSD: Add io_cache_{read,write} controls to debugfs
NFSD: Do the grace period check in ->proc_layoutget
nfsd: delete unnecessary NULL check in __fh_verify()
NFSD: Allow layoutcommit during grace period
NFSD: Disallow layoutget during grace period
sunrpc: fix "occurence"->"occurrence"
nfsd: Don't force CRYPTO_LIB_SHA256 to be built-in
nfsd: nfserr_jukebox in nlm_fopen should lead to a retry
NFSD: Reduce DRC bucket size
NFSD: Delay adding new entries to LRU
SUNRPC: Move the svc_rpcb_cleanup() call sites
NFS: Remove rpcbind cleanup for NFSv4.0 callback
nfsd: unregister with rpcbind when deleting a transport
NFSD: Drop redundant conversion to bool
sunrpc: eliminate return pointer in svc_tcp_sendmsg()
sunrpc: fix pr_notice in svc_tcp_sendto() to show correct length
nfsd: decouple the xprtsec policy check from check_nfsd_access()
NFSD: Fix destination buffer size in nfsd4_ssc_setup_dul()
...
|
|
Since commit 22f72088ffe6 ("tools headers: Update the syscall table with
the kernel sources") the arm64 syscall header is generated at build
time. Later, commit bfb713ea53c7 ("perf tools: Fix arm64 build by
generating unistd_64.h") added a dependency to libperf to guarantee that
this header was created before building libperf or perf itself.
However, libjvmti also requires this header but does not depend on
libperf, leading to build failures such as:
In file included from /usr/include/sys/syscall.h:24,
from /usr/include/syscall.h:1,
from jvmti/jvmti_agent.c:36:
tools/arch/arm64/include/uapi/asm/unistd.h:2:10: fatal error: asm/unistd_64.h: No such file or directory
2 | #include <asm/unistd_64.h>
Fix this by ensuring that libperf is built before libjvmti, so that
unistd_64.h is always available.
Fixes: 22f72088ffe69a37 ("tools headers: Update the syscall table with the kernel sources")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Minet <v.minet@criteo.com>
Link: https://lore.kernel.org/r/20250922053702.2688374-1-v.minet@criteo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251003210127.1021918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort config files for networking selftests. This should help us
avoid merge conflicts between net and net-next. patchwork check
will be added to prevent new issues.
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251003205736.1019673-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already only test each kcore map once, but on slow systems
(particularly with network filesystems) even the non-kcore maps are
slow.
The test can test the same objdump output over and over which only wastes
time. Generalize the skipping mechanism to track all DSOs and addresses
so that each section is only tested once.
On a fully loaded ARM Juno (simulating a parallel 'perf test' run) with
a network filesystem, the original runtime is:
real 1m51.126s
user 0m19.445s
sys 1m15.431s
And the new runtime is:
real 0m48.873s
user 0m8.031s
sys 0m32.353s
Committer testing:
# perf test "code read"
22: Object code reading : Ok
#
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add example commands for building perf with Clang.
Since recent Android NDK releases use Clang as the default compiler, a
separate Android specific document is no longer needed; point to the
general build documentation instead.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-9-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for building perf with clang. For cross compilation, the
Makefile dynamically selects target flag for corresponding arch.
This patch has been verified on x86_64 machine with Ubuntu distro, it
can build successfully for native target, and for cross building Arm64
and s390.
Example: native build on x86_64 / Ubuntu machine:
$ HOSTCC=clang CC=clang CXX=clang++ make -C tools/perf
Example: cross building s390 target on x86_64 / Ubuntu machine:
# Install x390x cross toolchain and headers
$ sudo apt-get install gcc-s390x-linux-gnu g++-s390x-linux-gnu \
libc6-dev-s390x-cross linux-libc-dev-s390x-cross
# Build with clang
$ HOSTCC=clang CC=clang CXX=clang++ \
ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- \
make -C tools/perf NO_LIBELF=1 NO_LIBTRACEEVENT=1 NO_LIBPYTHON=1
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-8-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
unroll_loop_thread.c:35:25: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
35 | : /* in */ [in] "r" (in)
| ^
unroll_loop_thread.c:39:1: warning: non-void function does not return a value [-Wreturn-type]
39 | }
| ^
Use the modifier "w" for 32-bit register access and return NULL at the
end of thread function.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-7-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:8: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:14: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:8: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~
| %w[i]
thread_loop.c:41:38: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:14: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~~~
| %w[len]
Use the modifier "w" for 32-bit register access.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-6-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
memcpy_thread.c:30:1: warning: non-void function does not return a value in all control paths [-Wreturn-type]
30 | }
| ^
Dismiss the warning with returning NULL from the thread function.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-5-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When build with perl5, it reports error:
In file included from /usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:7933:
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/inline.h:298:5: error:
mutex 'PL_env_mutex.lock' is not held on every path through
here [-Werror,-Wthread-safety-analysis]
298 | ENV_UNLOCK;
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:7091:31: note:
expanded from macro 'ENV_UNLOCK'
7091 | # define ENV_UNLOCK PERL_REENTRANT_UNLOCK("env"...
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:6465:7: note:
expanded from macro 'PERL_REENTRANT_UNLOCK'
6465 | } STMT_END
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:865:28: note:
expanded from macro 'STMT_END'
865 | # define STMT_END while (0)
| ^
The error is caused by perl header but not perf code, disable thread
safety analysis if including the header.
Though GCC does not support the thread safety analysis option, this
negative warning flag is silently ignored by it.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-4-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Clang's -dumpmachine outputs "aarch64-unknown-linux-gnu", which does not
match the MultiArch convention. This prevents the build system from
detecting installed packages.
Fix by stripping the trailing '-' from CROSS_COMPILE when setting
CROSS_ARCH.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-3-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When passing a list to subprocess.Popen, each element maps to one argv
token. Current code bundles multiple Clang flags into a single element,
something like:
cmd = ['clang',
'--target=x86_64-linux-gnu -fintegrated-as -Wno-cast-function-type-mismatch',
'test-hello.c']
So Clang only sees one long, invalid option instead of separate flags,
as a result, the script cannot capture any log via PIPE.
Fix this by using shlex.split() to separate the string so each option
becomes its own argv element. The fixed list will be:
cmd = ['clang',
'--target=x86_64-linux-gnu',
'-fintegrated-as',
'-Wno-cast-function-type-mismatch',
'test-hello.c']
Fixes: 09e6f9f98370 ("perf python: Fix splitting CC into compiler and options")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-2-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature test programs are built without enabling '-Wall -Werror'
options. As a result, a feature may appear to be available, but later
building in perf can fail with stricter checks.
Make the feature test program use the same warning options as perf.
Fixes: 1925459b4d92 ("tools build: Fix feature Makefile issues with 'O='")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-1-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Set in symbol__annotate() but never used.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor the addr2line function implementation into separate source files
(addr2line.[ch]) and rename the addr2line function cmd__addr2line. In
srcline replace the ifdef-ed addr2line implementations with one that
first tries the llvm__addr2line implementation, then the deprecated
libbfd__addr2line function and on failure uses cmd__addr2line.
If HAVE_LIBLLVM_SUPPORT is enabled the llvm__addr2line will execute
against the libLLVM.so it is linked against.
If HAVE_LIBLLVM_DYNAMIC is enabled then libperf-llvm.so (that links
against libLLVM.so) will be dlopened. If the dlopen succeeds then the
behavior should match HAVE_LIBLLVM_SUPPORT. On failure cmd__addr2line is
used. The dlopen is only tried once.
If HAVE_LIBLLVM_DYNAMIC isn't enabled then llvm__addr2line immediately
fails and cmd__addr2line is used.
Clean up the dso__free_a2l logic, which is only needed in the non-LLVM
version and moved to addr2line.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull x86 kvm updates from Paolo Bonzini:
"Generic:
- Rework almost all of KVM's exports to expose symbols only to KVM's
x86 vendor modules (kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko
x86:
- Rework almost all of KVM x86's exports to expose symbols only to
KVM's vendor modules, i.e. to kvm-{amd,intel}.ko
- Add support for virtualizing Control-flow Enforcement Technology
(CET) on Intel (Shadow Stacks and Indirect Branch Tracking) and AMD
(Shadow Stacks).
It is worth noting that while SHSTK and IBT can be enabled
separately in CPUID, it is not really possible to virtualize them
separately. Therefore, Intel processors will really allow both
SHSTK and IBT under the hood if either is made visible in the
guest's CPUID. The alternative would be to intercept
XSAVES/XRSTORS, which is not feasible for performance reasons
- Fix a variety of fuzzing WARNs all caused by checking L1 intercepts
when completing userspace I/O. KVM has already committed to
allowing L2 to to perform I/O at that point
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the
MSR is supposed to exist for v2 PMUs
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside
of forced emulation and other contrived testing scenarios)
- Clean up the MSR APIs in preparation for CET and FRED
virtualization, as well as mediated vPMU support
- Clean up a pile of PMU code in anticipation of adding support for
mediated vPMUs
- Reject in-kernel IOAPIC/PIT for TDX VMs, as KVM can't obtain EOI
vmexits needed to faithfully emulate an I/O APIC for such guests
- Many cleanups and minor fixes
- Recover possible NX huge pages within the TDP MMU under read lock
to reduce guest jitter when restoring NX huge pages
- Return -EAGAIN during prefault if userspace concurrently
deletes/moves the relevant memslot, to fix an issue where
prefaulting could deadlock with the memslot update
x86 (AMD):
- Enable AVIC by default for Zen4+ if x2AVIC (and other prereqs) is
supported
- Require a minimum GHCB version of 2 when starting SEV-SNP guests
via KVM_SEV_INIT2 so that invalid GHCB versions result in immediate
errors instead of latent guest failures
- Add support for SEV-SNP's CipherText Hiding, an opt-in feature that
prevents unauthorized CPU accesses from reading the ciphertext of
SNP guest private memory, e.g. to attempt an offline attack. This
feature splits the shared SEV-ES/SEV-SNP ASID space into separate
ranges for SEV-ES and SEV-SNP guests, therefore a new module
parameter is needed to control the number of ASIDs that can be used
for VMs with CipherText Hiding vs. how many can be used to run
SEV-ES guests
- Add support for Secure TSC for SEV-SNP guests, which prevents the
untrusted host from tampering with the guest's TSC frequency, while
still allowing the the VMM to configure the guest's TSC frequency
prior to launch
- Validate the XCR0 provided by the guest (via the GHCB) to avoid
bugs resulting from bogus XCR0 values
- Save an SEV guest's policy if and only if LAUNCH_START fully
succeeds to avoid leaving behind stale state (thankfully not
consumed in KVM)
- Explicitly reject non-positive effective lengths during SNP's
LAUNCH_UPDATE instead of subtly relying on guest_memfd to deal with
them
- Reload the pre-VMRUN TSC_AUX on #VMEXIT for SEV-ES guests, not the
host's desired TSC_AUX, to fix a bug where KVM was keeping a
different vCPU's TSC_AUX in the host MSR until return to userspace
KVM (Intel):
- Preparation for FRED support
- Don't retry in TDX's anti-zero-step mitigation if the target
memslot is invalid, i.e. is being deleted or moved, to fix a
deadlock scenario similar to the aforementioned prefaulting case
- Misc bugfixes and minor cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (142 commits)
KVM: x86: Export KVM-internal symbols for sub-modules only
KVM: x86: Drop pointless exports of kvm_arch_xxx() hooks
KVM: x86: Move kvm_intr_is_single_vcpu() to lapic.c
KVM: Export KVM-internal symbols for sub-modules only
KVM: s390/vfio-ap: Use kvm_is_gpa_in_memslot() instead of open coded equivalent
KVM: VMX: Make CR4.CET a guest owned bit
KVM: selftests: Verify MSRs are (not) in save/restore list when (un)supported
KVM: selftests: Add coverage for KVM-defined registers in MSRs test
KVM: selftests: Add KVM_{G,S}ET_ONE_REG coverage to MSRs test
KVM: selftests: Extend MSRs test to validate vCPUs without supported features
KVM: selftests: Add support for MSR_IA32_{S,U}_CET to MSRs test
KVM: selftests: Add an MSR test to exercise guest/host and read/write
KVM: x86: Define AMD's #HV, #VC, and #SX exception vectors
KVM: x86: Define Control Protection Exception (#CP) vector
KVM: x86: Add human friendly formatting for #XM, and #VE
KVM: SVM: Enable shadow stack virtualization for SVM
KVM: SEV: Synchronize MSR_IA32_XSS from the GHCB when it's valid
KVM: SVM: Pass through shadow stack MSRs as appropriate
KVM: SVM: Update dump_vmcb with shadow stack save area additions
KVM: nSVM: Save/load CET Shadow Stack state to/from vmcb12/vmcb02
...
|
|
Reduce the scope of ins__scnprintf() and ins__is_nop() that aren't used
outside of disasm.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Ensure errno is set and return to caller for error handling.
Unusually for perf the value isn't negated as expected by
symbol__strerror_disassemble().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Set the buffer to the code in the BPF linear info. This enables BPF
JIT code disassembly by LLVM and capstone.
Move the common but minimal disassmble_bpf_image call to
disassemble_objdump so that it is only called after falling back to the
objdump option.
Similarly move the disassmble_bpf function to disassemble_objdump and
rename to disassmble_bpf_libbfd to make it clearer that this support
relies on libbfd.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the read_symbol function to dso.h, make the return type const and
add a mutable out_buf out parameter.
In future changes this will allow a code pointer to be returned without
necessary allocating memory.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move the 3 LLVM initialization routines to be called in a single
init_llvm function that has its own bool to avoid repeated
initialization.
Reduce the scope of triplet and avoid copying strings for x86.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
[ Move init_llvm() under HAVE_LIBLLVM_SUPPORT to fix the build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Advertise when perf is built with the HAVE_LIBLLVM_SUPPORT option.
Committer testing:
$ perf -vv | grep LLVM
libLLVM: [ on ] # HAVE_LIBLLVM_SUPPORT
$
And the form to use in scripts, notably the tools/perf/tests/shell/
'perf test' ones:
$ perf check feature libllvm
libLLVM: [ on ] # HAVE_LIBLLVM_SUPPORT
$ perf check -q feature libllvm && echo LLVM is present
LLVM is present
$ perf check -q feature liballvm && echo ALLVM is present
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"Primarily bug fixes. Dave introduced the usage of cleanup.h a bit late
in the cycle to help with the new label work required within CXL [1]
nvdimm:
- Return -ENOMEM if devm_kcalloc() fails in ndtest_probe()
- Clean up __nd_ioctl() and remove gotos
- Remove duplicate linux/slab.h header
- Introduce guard() for nvdimm_bus_lock
- Use str_plural() to simplify the code
ACPI:
- NFIT: Fix incorrect ndr_desc being reportedin dev_err message"
Link: https://lore.kernel.org/all/20250917134116.1623730-1-s.neeraj@samsung.com/ [1]
* tag 'libnvdimm-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Remove duplicate linux/slab.h header
nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe()
nvdimm: Clean up __nd_ioctl() and remove gotos
nvdimm: Introduce guard() for nvdimm_bus_lock
ACPI: NFIT: Fix incorrect ndr_desc being reportedin dev_err message
nvdimm: Use str_plural() to simplify the code
|
|
Fix functions that return undefined values. These issues were caught by
running clang using LLVM=1 option.
Clang warnings are as follows:
ovpn-cli.c:1587:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
1587 | if (!sock) {
| ^~~~~
ovpn-cli.c:1635:9: note: uninitialized use occurs here
1635 | return ret;
| ^~~
ovpn-cli.c:1587:2: note: remove the 'if' if its condition is always false
1587 | if (!sock) {
| ^~~~~~~~~~~~
1588 | fprintf(stderr, "cannot allocate netlink socket\n");
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1589 | goto err_free;
| ~~~~~~~~~~~~~~
1590 | }
| ~
ovpn-cli.c:1584:15: note: initialize the variable 'ret' to silence this warning
1584 | int mcid, ret;
| ^
| = 0
ovpn-cli.c:2107:7: warning: variable 'ret' is used uninitialized whenever switch case is taken [-Wsometimes-uninitialized]
2107 | case CMD_INVALID:
| ^~~~~~~~~~~
ovpn-cli.c:2111:9: note: uninitialized use occurs here
2111 | return ret;
| ^~~
ovpn-cli.c:1939:12: note: initialize the variable 'ret' to silence this warning
1939 | int n, ret;
| ^
|
Fixes: 959bc330a439 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Sidharth Seela <sidharthseela@gmail.com>
Link: https://patch.msgid.link/20251001123107.96244-2-sidharthseela@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
These violate aliasing rules and may be miscompiled unless
-fno-strict-aliasing is used. Replace them with the standard memcpy()
solution. Note that compilers know how to optimize this properly.
Fixes: 4a1c9e544b8d ("libbpf: remove linux/unaligned.h dependency for libbpf_sha256()")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20251006012037.159295-1-ebiggers@kernel.org
|
