| Age | Commit message (Collapse) | Author |
|---|
|
On x86, arch_dest_reloc_offset() hardcodes the addend adjustment to
four, but the actual adjustment depends on the relocation type. Fix
that.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
find_symbol_hole_containing() fails to find a symbol hole (aka stripped
weak symbol) if its section has no symbols before the hole. This breaks
weak symbol detection if -ffunction-sections is enabled.
Fix that by allowing the interval tree to contain section symbols, which
are always at offset zero for a given section.
Fixes a bunch of (-ffunction-sections) warnings like:
vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction
Fixes: 4adb23686795 ("objtool: Ignore extra-symbol code")
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Zero-length symbols get inserted in the wrong spot. Fix that.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The following commit
5da6aea375cd ("objtool: Fix find_{symbol,func}_containing()")
fixed the issue where overlapping symbols weren't getting sorted
properly in the symbol tree. Therefore the workaround to skip adding
empty symbols from the following commit
a2e38dffcd93 ("objtool: Don't add empty symbols to the rbtree")
is no longer needed.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Up to a certain point in objtool's execution, all errors are fatal and
return -1. When propagating such errors, just return -1 directly
instead of trying to propagate the original return code. This helps
make the code more compact and the behavior more explicit.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Properly check and propagate the return value of elf_truncate_section()
to avoid silent failures.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The free(sym) call in the read_symbols() error path is fundamentally
broken: 'sym' doesn't point to any allocated block. If triggered,
things would go from bad to worse.
Remove the free() and simplify the error paths. Freeing memory isn't
necessary here anyway, these are fatal errors which lead to an immediate
exit().
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In the rare case of overlapping symbols, find_symbol_containing() just
returns the first one it finds. Make it slightly less arbitrary by
returning the smallest symbol with size > 0.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
For consistency with the other function templates, change
_subtree_search_*() to use the user-supplied ITSTATIC rather than the
hard-coded 'static'.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The following commit made an improvement to interval_tree_generic.h, but
didn't sync it to the tools copy:
19811285784f ("lib/interval_tree: skip the check before go to the right subtree")
Sync it, and add it to objtool's sync-check.sh so they are more likely
to stay in sync going forward.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The objtool command line 'objtool --hacks=jump_label foo.o' on its own
should be expected to rewrite jump labels to NOPs. This means the
add_special_section_alts() code path needs to run when only this option
is provided.
This is mainly relevant in certain debugging situations, but could
potentially also fix kernel builds in which objtool is run with
--hacks=jump_label but without --orc, --stackval, --uaccess, or
--hacks=noinstr.
Fixes: de6fbcedf5ab ("objtool: Read special sections with alts only when specific options are selected")
Signed-off-by: Dylan Hatch <dylanbhatch@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The tools version of fixdep has broken dependencies. It doesn't get
rebuilt if the host compiler or headers change.
Build fixdep with the tools kbuild infrastructure, so fixdep runs on
itself. Due to the recursive dependency, its dependency file is
incomplete the very first time it gets built. In that case build it a
second time to achieve fixdep inception.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The jq command is used in vlan_bridge_binding.sh, if it is not supported,
the test will spam the following log.
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# ./vlan_bridge_binding.sh: line 51: jq: command not found
# TEST: Test bridge_binding on->off when lower down [FAIL]
# Got operstate of , expected 0
The rtnetlink.sh has the same problem. It makes sense to check if jq is
installed before running these tests. After this patch, the
vlan_bridge_binding.sh skipped if jq is not supported:
# timeout set to 3600
# selftests: net: vlan_bridge_binding.sh
# TEST: jq not installed [SKIP]
Fixes: dca12e9ab760 ("selftests: net: Add a VLAN bridge binding selftest")
Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251013080039.3035898-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For x86_64 the kernel consistently uses 2 instructions for all NOPs:
90 - NOP
0f 1f /0 - NOPL
Notably:
- REP NOP is PAUSE, not a NOP instruction.
- 0f {0c...0f} is reserved space,
except for 0f 0d /1, which is PREFETCHW, not a NOP.
- 0f {19,1c...1f} is reserved space,
except for 0f 1f /0, which is NOPL.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
Per commit 85a2d4a890dc ("x86,ibt: Use UDB instead of 0xEA"), make
sure objtool also recognises UDB as a #UD instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Was properly fixed in the decoder with commit 4b626015e1bf ("x86/insn:
Stop decoding i64 instructions in x86-64 mode at opcode")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
for sub-scheduler authority checks. Add compat wrappers which fall back to
direct p->scx field writes on older kernels.
Suggested-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
In preparation for hierarchical schedulers, change scx_bpf_dsq_insert() and
scx_bpf_dsq_insert_vtime() to return bool instead of void. With
sub-schedulers, there will be no reliable way to guarantee a task is still
owned by the sub-scheduler at insertion time (e.g., the task may have been
migrated to another scheduler). The bool return value will enable
sub-schedulers to detect and gracefully handle insertion failures.
For the root scheduler, insertion failures will continue to trigger scheduler
abort via scx_error(), so existing code doesn't need to check the return
value. Backward compatibility is maintained through compat wrappers.
Also update scx_bpf_dsq_move() documentation to clarify that it can return
false for sub-schedulers when @dsq_id points to a disallowed local DSQ.
Reviewed-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
scx_bpf_dsq_insert_vtime() and scx_bpf_select_cpu_and() currently have 5
parameters. An upcoming change will add aux__prog parameter which will exceed
BPF's 5 argument limit.
Prepare by adding new kfuncs __scx_bpf_dsq_insert_vtime() and
__scx_bpf_select_cpu_and() that take args structs. The existing kfuncs are
kept as compatibility wrappers. BPF programs use inline wrappers that detect
kernel API version via bpf_core_type_exists() and use the new struct-based
kfuncs when available, falling back to compat kfuncs otherwise. This allows
BPF programs to work with both old and new kernels.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
With the planned hierarchical scheduler support, sub-schedulers will need to
be verified for authority before being allowed to modify task->scx.slice and
task->scx.dsq_vtime. Add scx_bpf_task_set_slice() and
scx_bpf_task_set_dsq_vtime() which will perform the necessary permission
checks.
Root schedulers can still directly write to these fields, so this doesn't
affect existing schedulers.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Enough time has passed since the introduction of scx_bpf_task_cgroup() and
the scx_bpf_dispatch* -> scx_bpf_dsq* kfunc renaming. Strip the compatibility
macros.
Acked-by: Changwoo Min <changwoo@igalia.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
That cpuinfo_x86.x86_capability[] element was supposed to mirror CPUID flags
from CPUID_0x80000007_EBX but that leaf has still to this day only three bits
defined in it. So move those bits to scattered.c and free the capability
element for synthetic flags.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
The userspace-visible encoding for CNTV_CVAL_EL0 and CNTVCNT_EL0
have been swapped for as long as usersapce has had access to the
registers. This is documented in arch/arm64/include/uapi/asm/kvm.h.
Despite that, the get_reg_list test has unhelpful comments indicating
the wrong register for the encoding.
Replace this with definitions exposed in the include file, and
a comment explaining again the brokenness.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add yet another configuration, this time dealing E2H=0.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hyp virtual timer registers only exist when VHE is present,
Similarly, VNCR_EL2 only exists when NV2 is present.
Make these dependencies explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vgic_lpi_stress rather hilariously leaves IRQs disabled for the duration
of the test. While the ITS translation of MSIs happens regardless of
this, for completeness the guest should actually handle the LPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
vcpus array contains pointers to struct kvm_vcpu {}. It is way overkill
to allocate the array with (nr_cpus * sizeof(struct kvm_vcpu)). Fix the
allocation by using the correct size.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We forgot to sync several registers (ID_AA64PFR1, MPIDR, CLIDR) in guest to
make sure that the guest had seen the written value.
Add them to the list.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Reviewed-By: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The KVM_IRQFD ioctl fails if no irqchip is present in-kernel, which
isn't too surprising as there's not much KVM can do for an IRQ if it
cannot resolve a destination.
As written the irqfd_test assumes that a 'default' VM created in
selftests has an in-kernel irqchip created implicitly. That may be the
case on x86 but it isn't necessarily true on other architectures.
Add an arch predicate indicating if 'default' VMs get an irqchip and
make the irqfd_test depend on it. Work around arm64 VGIC initialization
requirements by using vm_create_with_one_vcpu(), ignoring the created
vCPU as it isn't used for the test.
Reported-by: Sebastian Ott <sebott@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Fixes: 7e9b231c402a ("KVM: selftests: Add a KVM_IRQFD test to verify uniqueness requirements")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Store the width of arm64's timer counter as an "int", not a "uint64_t".
ilog2() returns an "int", and more importantly using what is an "unsigned
long" under the hood makes clang unhappy due to a type mismatch when
clamping the width to a sane value.
arm64/arch_timer_edge_cases.c:1032:10: error: comparison of distinct pointer types
('typeof (width) *' (aka 'unsigned long *') and 'typeof (56) *' (aka 'int *'))
[-Werror,-Wcompare-distinct-pointer-types]
1032 | width = clamp(width, 56, 64);
| ^~~~~~~~~~~~~~~~~~~~
tools/include/linux/kernel.h:47:45: note: expanded from macro 'clamp'
47 | #define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
| ^~~~~~~~~~~~
tools/include/linux/kernel.h:33:17: note: expanded from macro 'max'
33 | (void) (&_max1 == &_max2); \
| ~~~~~~ ^ ~~~~~~
tools/include/linux/kernel.h:39:9: note: expanded from macro 'min'
39 | typeof(x) _min1 = (x); \
| ^
Fixes: fad4cf944839 ("KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases")
Cc: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A defect against the architecture now allows an implementation to treat
AMO as 1 when HCR_EL2.{E2H, TGE} = {1, 0}. KVM now takes advantage of
this interpretation to address a quality of emulation issue w.r.t.
SError injection.
Add a corresponding test case and expect a pending SError to be taken.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The bperf BPF counter code doesn't handle "any"(-1) CPU events, always
wanting to aggregate a count against a CPU, which avoids the need for
atomics so let's not change that. Force evsels used for BPF counters
to require a CPU when not in system-wide mode so that the "any"(-1)
value isn't used during map propagation and evsel's CPU map matches
that of the PMU.
Fixes: b91917c0c6fa ("perf bpf_counter: Fix handling of cpumap fixing hybrid")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Testing clang features doesn't specify a "-o" option so an a.out file
is created and left in the make directory (not the output). Fix this
by specifying a "-o" of "/dev/null". Reorganize the code a little to
help with readability.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If an event shows as "<not supported>" in perf stat output, in verbose
mode add the strerror output to help diagnose the issue.
Consider:
```
$ perf stat -e cycles,data_read,instructions true
Performance counter stats for 'true':
357,457 cycles:u
<not supported> MiB data_read:u
156,182 instructions:u # 0.44 insn per cycle
0.001250315 seconds time elapsed
0.001283000 seconds user
0.000000000 seconds sys
```
To understand why the data_read uncore event failed you can run it
again with -v option. This change adds detailed message about the
error and suggestion how to fix it potentially.
Warning:
data_read:u event is not supported by the kernel.
Invalid event (data_read:u) in per-thread mode, enable system wide with '-a'.
Signed-off-by: Ian Rogers <irogers@google.com>
[ simplified the commit message ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Use strdup() instead of fixed PATH_MAX buffer for storing paths to not
waste memory.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
wstatus is allowed to be NULL. Avoid a segmentation fault in this case.
Fixes: 0c89abf5ab3f ("tools/nolibc: implement waitpid() in terms of waitid()")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Convert remaining __init__ files similar to what we did in
commit b615879dbfea ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
|
|
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
|
Expand the guest_memfd negative testcases for overflow and MAP_PRIVATE to
verify that reads to inaccessible memory also get a SIGBUS.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lisa Wang <wyihan@google.com>
Tested-by: Lisa Wang <wyihan@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a guest_memfd testcase to verify that faulting in private memory gets
a SIGBUS. For now, test only the case where memory is private by default
since KVM doesn't yet support in-place conversion.
Deliberately run the CoW test with and without INIT_SHARED set as KVM
should disallow MAP_PRIVATE regardless of whether the memory itself is
private from a CoCo perspective.
Cc: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the guest_memfd test's SIGBUS handling functionality into a common
TEST_EXPECT_SIGBUS() macro in anticipation of adding more SIGBUS testcases.
Eating a SIGBUS isn't terrible difficult, but it requires a non-trivial
amount of boilerplate code, and using a macro allows selftests to print
out the exact action that failed to generate a SIGBUS without the developer
needing to remember to add a useful error message.
Explicitly mark the SIGBUS handler as "used", as gcc-14 at least likes to
discard the function before linking.
Opportunistically use TEST_FAIL(...) instead of TEST_ASSERT(false, ...),
and fix the write path of the guest_memfd test to use the local "val"
instead of hardcoding the literal value a second time.
Suggested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Lisa Wang <wyihan@google.com>
Tested-by: Lisa Wang <wyihan@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the guest_memfd Copy-on-Write (CoW) testcase to its own function to
better separate positive testcases from negative testcases.
No functional change intended.
Suggested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add and use wrappers for mmap() and munmap() that assert success to reduce
a significant amount of boilerplate code, to ensure all tests assert on
failure, and to provide consistent error messages on failure.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If a VM type supports KVM_CAP_GUEST_MEMFD_MMAP, the guest_memfd test will
run all test cases with GUEST_MEMFD_FLAG_MMAP set. This leaves the code
path for creating a non-mmap()-able guest_memfd on a VM that supports
mappable guest memfds untested.
Refactor the test to run the main test suite with a given set of flags.
Then, for VM types that support the mappable capability, invoke the test
suite twice: once with no flags, and once with GUEST_MEMFD_FLAG_MMAP
set.
This ensures both creation paths are properly exercised on capable VMs.
Run test_guest_memfd_flags() only once per VM type since it depends only
on the set of valid/supported flags, i.e. iterating over an arbitrary set
of flags is both unnecessary and wrong.
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: use double-underscores for the inner helper]
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refactor the guest_memfd selftest to improve test isolation by creating a
a new guest_memfd for each testcase. Currently, the test reuses a single
guest_memfd instance for all testcases, and thus creates dependencies
between tests, e.g. not truncating folios from the guest_memfd instance
at the end of a test could lead to unexpected results (see the PUNCH_HOLE
purging that needs to done by in-flight the NUMA testcases[1]).
Invoke each test via a macro wrapper to create and close a guest_memfd
to cut down on the boilerplate copy+paste needed to create a test.
Link: https://lore.kernel.org/all/20250827175247.83322-10-shivankg@amd.com
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use a global variable to track the host page size in the guest_memfd test
so that the information doesn't need to be constantly passed around. The
state is purely a reflection of the underlying system, i.e. can't be set
by the test and is constant for a given invocation of the test, and thus
explicitly passing the host page size to individual testcases adds no
value, e.g. doesn't allow testing different combinations.
Making page_size a global will simplify an upcoming change to create a new
guest_memfd instance per testcase.
No functional change intended.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
