summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2019-04-15netfilter: nat: fix icmp id randomizationFlorian Westphal
Sven Auhagen reported that a 2nd ping request will fail if 'fully-random' mode is used. Reason is that if no proto information is given, min/max are both 0, so we set the icmp id to 0 instead of chosing a random value between 0 and 65535. Update test case as well to catch this, without fix this yields: [..] ERROR: cannot ping ns1 from ns2 with ip masquerade fully-random (attempt 2) ERROR: cannot ping ns1 from ns2 with ipv6 masquerade fully-random (attempt 2) ... becaus 2nd ping clashes with existing 'id 0' icmp conntrack and gets dropped. Fixes: 203f2e78200c27e ("netfilter: nat: remove l4proto->unique_tuple") Reported-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-13selftests: netfilter: check icmp pkttoobig errors are set as relatedFlorian Westphal
When an icmp error such as pkttoobig is received, conntrack checks if the "inner" header (header of packet that did not fit link mtu) is matches an existing connection, and, if so, sets that packet as being related to the conntrack entry it found. It was recently reported that this "related" setting also works if the inner header is from another, different connection (i.e., artificial/forged icmp error). Add a test, followup patch will add additional "inner dst matches outer dst in reverse direction" check before setting related state. Link: https://www.synacktiv.com/posts/systems/icmp-reachable.html Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-12netdevsim: move sdev specific bpf debugfs files to sdev dirJiri Pirko
Some netdevsim bpf debugfs files are per-sdev, yet they are defined per netdevsim instance. Move them under sdev directory. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12selftests/bpf: C based test for sysctl and strtoXAndrey Ignatov
Add C based test for a few bpf_sysctl_* helpers and bpf_strtoul. Make sure that sysctl can be identified by name and that multiple integers can be parsed from sysctl value with bpf_strtoul. net/ipv4/tcp_mem is chosen as a testing sysctl, it contains 3 unsigned longs, they all are parsed and compared (val[0] < val[1] < val[2]). Example of output: # ./test_sysctl ... Test case: C prog: deny all writes .. [PASS] Test case: C prog: deny access by name .. [PASS] Test case: C prog: read tcp_mem .. [PASS] Summary: 39 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test bpf_strtol and bpf_strtoul helpersAndrey Ignatov
Test that bpf_strtol and bpf_strtoul helpers can be used to convert provided buffer to long or unsigned long correspondingly and return both correct result and number of consumed bytes, or proper errno. Example of output: # ./test_sysctl .. Test case: bpf_strtoul one number string .. [PASS] Test case: bpf_strtoul multi number string .. [PASS] Test case: bpf_strtoul buf_len = 0, reject .. [PASS] Test case: bpf_strtoul supported base, ok .. [PASS] Test case: bpf_strtoul unsupported base, EINVAL .. [PASS] Test case: bpf_strtoul buf with spaces only, EINVAL .. [PASS] Test case: bpf_strtoul negative number, EINVAL .. [PASS] Test case: bpf_strtol negative number, ok .. [PASS] Test case: bpf_strtol hex number, ok .. [PASS] Test case: bpf_strtol max long .. [PASS] Test case: bpf_strtol overflow, ERANGE .. [PASS] Summary: 36 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test ARG_PTR_TO_LONG arg typeAndrey Ignatov
Test that verifier handles new argument types properly, including uninitialized or partially initialized value, misaligned stack access, etc. Example of output: #456/p ARG_PTR_TO_LONG uninitialized OK #457/p ARG_PTR_TO_LONG half-uninitialized OK #458/p ARG_PTR_TO_LONG misaligned OK #459/p ARG_PTR_TO_LONG size < sizeof(long) OK #460/p ARG_PTR_TO_LONG initialized OK Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Add sysctl and strtoX helpers to bpf_helpers.hAndrey Ignatov
Add bpf_sysctl_* and bpf_strtoX helpers to bpf_helpers.h. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test file_pos field in bpf_sysctl ctxAndrey Ignatov
Test access to file_pos field of bpf_sysctl context, both read (incl. narrow read) and write. # ./test_sysctl ... Test case: ctx:file_pos sysctl:read read ok .. [PASS] Test case: ctx:file_pos sysctl:read read ok narrow .. [PASS] Test case: ctx:file_pos sysctl:read write ok .. [PASS] ... Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test bpf_sysctl_{get,set}_new_value helpersAndrey Ignatov
Test that new value provided by user space on sysctl write can be read by bpf_sysctl_get_new_value and overridden by bpf_sysctl_set_new_value. # ./test_sysctl ... Test case: sysctl_get_new_value sysctl:read EINVAL .. [PASS] Test case: sysctl_get_new_value sysctl:write ok .. [PASS] Test case: sysctl_get_new_value sysctl:write ok long .. [PASS] Test case: sysctl_get_new_value sysctl:write E2BIG .. [PASS] Test case: sysctl_set_new_value sysctl:read EINVAL .. [PASS] Test case: sysctl_set_new_value sysctl:write ok .. [PASS] Summary: 22 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test sysctl_get_current_value helperAndrey Ignatov
Test sysctl_get_current_value on sysctl read and write, buffers with enough space and too small buffers to get E2BIG and truncated result, etc. # ./test_sysctl ... Test case: sysctl_get_current_value sysctl:read ok, gt .. [PASS] Test case: sysctl_get_current_value sysctl:read ok, eq .. [PASS] Test case: sysctl_get_current_value sysctl:read E2BIG truncated .. [PASS] Test case: sysctl_get_current_value sysctl:read EINVAL .. [PASS] Test case: sysctl_get_current_value sysctl:write ok .. [PASS] Summary: 16 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test bpf_sysctl_get_name helperAndrey Ignatov
Test w/ and w/o BPF_F_SYSCTL_BASE_NAME, buffers with enough space and too small buffers to get E2BIG and truncated result, etc. # ./test_sysctl ... Test case: sysctl_get_name sysctl_value:base ok .. [PASS] Test case: sysctl_get_name sysctl_value:base E2BIG truncated .. [PASS] Test case: sysctl_get_name sysctl:full ok .. [PASS] Test case: sysctl_get_name sysctl:full E2BIG truncated .. [PASS] Test case: sysctl_get_name sysctl:full E2BIG truncated small .. [PASS] Summary: 11 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test BPF_CGROUP_SYSCTLAndrey Ignatov
Add unit test for BPF_PROG_TYPE_CGROUP_SYSCTL program type. Test that program can allow/deny access. Test both valid and invalid accesses to ctx->write. Example of output: # ./test_sysctl Test case: sysctl wrong attach_type .. [PASS] Test case: sysctl:read allow all .. [PASS] Test case: sysctl:read deny all .. [PASS] Test case: ctx:write sysctl:read read ok .. [PASS] Test case: ctx:write sysctl:write read ok .. [PASS] Test case: ctx:write sysctl:read write reject .. [PASS] Summary: 6 PASSED, 0 FAILED Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12selftests/bpf: Test sysctl section nameAndrey Ignatov
Add unit test to verify that program and attach types are properly identified for "cgroup/sysctl" section name. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-11selftests: Add debugging options to pmtu.shDavid Ahern
pmtu.sh script runs a number of tests and dumps a summary of pass/fail. If a test fails, it is near impossible to debug why. For example: TEST: ipv6: PMTU exceptions [FAIL] There are a lot of commands run behind the scenes for this test. Which one is failing? Add a VERBOSE option to show commands that are run and any output from those commands. Add a PAUSE_ON_FAIL option to halt the script if a test fails allowing users to poke around with the setup in the failed state. In the process, rename tracing to TRACING and move declaration to top with the new variables. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-12 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Improve BPF verifier scalability for large programs through two optimizations: i) remove verifier states that are not useful in pruning, ii) stop walking parentage chain once first LIVE_READ is seen. Combined gives approx 20x speedup. Increase limits for accepting large programs under root, and add various stress tests, from Alexei. 2) Implement global data support in BPF. This enables static global variables for .data, .rodata and .bss sections to be properly handled which allows for more natural program development. This also opens up the possibility to optimize program workflow by compiling ELFs only once and later only rewriting section data before reload, from Daniel and with test cases and libbpf refactoring from Joe. 3) Add config option to generate BTF type info for vmlinux as part of the kernel build process. DWARF debug info is converted via pahole to BTF. Latter relies on libbpf and makes use of BTF deduplication algorithm which results in 100x savings compared to DWARF data. Resulting .BTF section is typically about 2MB in size, from Andrii. 4) Add BPF verifier support for stack access with variable offset from helpers and add various test cases along with it, from Andrey. 5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header so that L2 encapsulation can be used for tc tunnels, from Alan. 6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that users can define a subset of allowed __sk_buff fields that get fed into the test program, from Stanislav. 7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up various UBSAN warnings in bpftool, from Yonghong. 8) Generate a pkg-config file for libbpf, from Luca. 9) Dump program's BTF id in bpftool, from Prashant. 10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP program, from Magnus. 11) kallsyms related fixes for the case when symbols are not present in BPF selftests and samples, from Daniel ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12selftests: netfilter: add ebtables broute test caseFlorian Westphal
ebtables -t broute allows to redirect packets in a way that they get pushed up the stack, even if the interface is part of a bridge. In case of IP packets to non-local address, this means those IP packets are routed instead of bridged-forwarded, just as if the bridge would not have existed. Expected test output is: PASS: netns connectivity: ns1 and ns2 can reach each other PASS: ns1/ns2 connectivity with active broute rule PASS: ns1/ns2 connectivity with active broute rule and bridge forward drop Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-11selftests: fib_tests: Fix 'Command line is not complete' errorsDavid Ahern
A couple of tests are verifying a route has been removed. The helper expects the prefix as the first part of the expected output. When checking that a route has been deleted the prefix is empty leading to an invalid ip command: $ ip ro ls match Command line is not complete. Try option "help" Fix by moving the comparison of expected output and output to a new function that is used by both check_route and check_route6. Use the new helper for the 2 checks on route removal. Also, remove the reset of 'set -x' in route_setup which overrides the user managed setting. Fixes: d69faad76584c ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11selftests_bpf: add L2 encap to test_tc_tunnelAlan Maguire
Update test_tc_tunnel to verify adding inner L2 header encapsulation (an MPLS label or ethernet header) works. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11selftests_bpf: extend test_tc_tunnel for UDP encapAlan Maguire
commit 868d523535c2 ("bpf: add bpf_skb_adjust_room encap flags") introduced support to bpf_skb_adjust_room for GSO-friendly GRE and UDP encapsulation and later introduced associated test_tc_tunnel tests. Here those tests are extended to cover UDP encapsulation also. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11net: sched: flower: use correct ht function to prevent duplicatesVlad Buslov
Implementation of function rhashtable_insert_fast() check if its internal helper function __rhashtable_insert_fast() returns non-NULL pointer and seemingly return -EEXIST in such case. However, since __rhashtable_insert_fast() is called with NULL key pointer, it never actually checks for duplicates, which means that -EEXIST is never returned to the user. Use rhashtable_lookup_insert_fast() hash table API instead. In order to verify that it works as expected and prevent the problem from happening in future, extend tc-tests with new test that verifies that no new filters with existing key can be inserted to flower classifier. Fixes: 1f17f7742eeb ("net: sched: flower: insert filter to ht before offloading it to hw") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11selftests: bpf: add selftest for __sk_buff context in BPF_PROG_TEST_RUNStanislav Fomichev
Simple test that sets cb to {1,2,3,4,5} and priority to 6, runs bpf program that fails if cb is not what we expect and increments cb[i] and priority. When the test finishes, we check that cb is now {2,3,4,5,6} and priority is 7. We also test the sanity checks: * ctx_in is provided, but ctx_size_in is zero (same for ctx_out/ctx_size_out) * unexpected non-zero fields in __sk_buff return EINVAL Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-10selftests: mlxsw: Test VRF MAC vetoingIdo Schimmel
Test that it is possible to set an IP address on a VRF and that it is not vetoed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10s390/rseq: use trap4 for RSEQ_SIGMartin Schwidefsky
Use trap4 as the guard instruction for the restartable sequence abort handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-09bpf, selftest: add test cases for BTF Var and DataSecDaniel Borkmann
Extend test_btf with various positive and negative tests around BTF verification of kind Var and DataSec. All passing as well: # ./test_btf [...] BTF raw test[4] (global data test #1): OK BTF raw test[5] (global data test #2): OK BTF raw test[6] (global data test #3): OK BTF raw test[7] (global data test #4, unsupported linkage): OK BTF raw test[8] (global data test #5, invalid var type): OK BTF raw test[9] (global data test #6, invalid var type (fwd type)): OK BTF raw test[10] (global data test #7, invalid var type (fwd type)): OK BTF raw test[11] (global data test #8, invalid var size): OK BTF raw test[12] (global data test #9, invalid var size): OK BTF raw test[13] (global data test #10, invalid var size): OK BTF raw test[14] (global data test #11, multiple section members): OK BTF raw test[15] (global data test #12, invalid offset): OK BTF raw test[16] (global data test #13, invalid offset): OK BTF raw test[17] (global data test #14, invalid offset): OK BTF raw test[18] (global data test #15, not var kind): OK BTF raw test[19] (global data test #16, invalid var referencing sec): OK BTF raw test[20] (global data test #17, invalid var referencing var): OK BTF raw test[21] (global data test #18, invalid var loop): OK BTF raw test[22] (global data test #19, invalid var referencing var): OK BTF raw test[23] (global data test #20, invalid ptr referencing var): OK BTF raw test[24] (global data test #21, var included in struct): OK BTF raw test[25] (global data test #22, array of var): OK [...] PASS:167 SKIP:0 FAIL:0 Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-09bpf, selftest: test global data/bss/rodata sectionsJoe Stringer
Add tests for libbpf relocation of static variable references into the .data, .rodata and .bss sections of the ELF, also add read-only test for .rodata. All passing: # ./test_progs [...] test_global_data:PASS:load program 0 nsec test_global_data:PASS:pass global data run 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .data reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .data reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .bss reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_number:PASS:relocate .rodata reference 925 nsec test_global_data_string:PASS:relocate .rodata reference 925 nsec test_global_data_string:PASS:relocate .data reference 925 nsec test_global_data_string:PASS:relocate .bss reference 925 nsec test_global_data_string:PASS:relocate .data reference 925 nsec test_global_data_string:PASS:relocate .bss reference 925 nsec test_global_data_struct:PASS:relocate .rodata reference 925 nsec test_global_data_struct:PASS:relocate .bss reference 925 nsec test_global_data_struct:PASS:relocate .rodata reference 925 nsec test_global_data_struct:PASS:relocate .data reference 925 nsec test_global_data_rdonly:PASS:test .rodata read-only map 925 nsec [...] Summary: 229 PASSED, 0 FAILED Note map helper signatures have been changed to avoid warnings when passing in const data. Joint work with Daniel Borkmann. Signed-off-by: Joe Stringer <joe@wand.net.nz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-09bpf, selftest: test {rd, wr}only flags and direct value accessDaniel Borkmann
Extend test_verifier with various test cases around the two kernel extensions, that is, {rd,wr}only map support as well as direct map value access. All passing, one skipped due to xskmap not present on test machine: # ./test_verifier [...] #948/p XDP pkt read, pkt_meta' <= pkt_data, bad access 1 OK #949/p XDP pkt read, pkt_meta' <= pkt_data, bad access 2 OK #950/p XDP pkt read, pkt_data <= pkt_meta', good access OK #951/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK #952/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK Summary: 1410 PASSED, 1 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2019-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one and bounds checking fixes in NFC, from Dan Carpenter. 2) There have been many weird regressions in r8169 since we turned ASPM support on, some are still not understood nor completely resolved. Let's turn this back off for now. From Heiner Kallweit. 3) Signess fixes for ethtool speed value handling, from Michael Zhivich. 4) Handle timestamps properly in macb driver, from Paul Thomas. 5) Two erspan fixes, it's the usual "skb ->data potentially reallocated and we're holding a stale protocol header pointer". From Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bnxt_en: Reset device on RX buffer errors. bnxt_en: Improve RX consumer index validity check. net: macb driver, check for SKBTX_HW_TSTAMP qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant ethtool: avoid signed-unsigned comparison in ethtool_validate_speed() net: ip6_gre: fix possible use-after-free in ip6erspan_rcv net: ip_gre: fix possible use-after-free in erspan_rcv r8169: disable ASPM again MAINTAINERS: ieee802154: update documentation file pattern net: vrf: Fix ping failed when vrf mtu is set to 0 selftests: add a tc matchall test case nfc: nci: Potential off by one in ->pipes[] array NFC: nci: Add some bounds checking in nci_hci_cmd_received()
2019-04-08selftests/tpm2: Open tpm dev in unbuffered modeTadeusz Struk
In order to have control over how many bytes are read or written the device needs to be opened in unbuffered mode. Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08selftests/tpm2: Extend tests to cover partial readsTadeusz Struk
Three new tests added: 1. Send get random cmd, read header in 1st read, read the rest in second read - expect success 2. Send get random cmd, read only part of the response, send another get random command, read the response - expect success 3. Send get random cmd followed by another get random cmd, without reading the first response - expect the second cmd to fail with -EBUSY Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08selftests: cgroup: fix cleanup path in test_memcg_subtree_control()Roman Gushchin
Dan reported, that cleanup path in test_memcg_subtree_control() triggers a static checker warning: ./tools/testing/selftests/cgroup/test_memcontrol.c:76 \ test_memcg_subtree_control() error: uninitialized symbol 'child2'. Fix this by initializing child2 and parent2 variables and split the cleanup path into few stages. Signed-off-by: Roman Gushchin <guro@fb.com> Fixes: 84092dbcf901 ("selftests: cgroup: add memory controller self-tests") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08selftests: efivarfs: remove the test_create_read file if it was existZhangXiaoxu
After the first run, the test case 'test_create_read' will always fail because the file is exist and file's attr is 'S_IMMUTABLE', open with 'O_RDWR' will always return -EPERM. Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08rseq/selftests: Adapt number of threads to the number of detected cpusMathieu Desnoyers
On smaller systems, running a test with 200 threads can take a long time on machines with smaller number of CPUs. Detect the number of online cpus at test runtime, and multiply that by 6 to have 6 rseq threads per cpu preempting each other. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Joel Fernandes <joelaf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: linux-kselftest@vger.kernel.org Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08lib: Add test module for strscpy_padTobin C. Harding
Add a test module for the new strscpy_pad() function. Tie it into the kselftest infrastructure for lib/ tests. Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08kselftest: Add test module framework headerTobin C. Harding
kselftest runs as a userspace process. Sometimes we need to test things from kernel space. One way of doing this is by creating a test module. Currently doing so requires developers to write a bunch of boiler plate in the module if kselftest is to be used to run the tests. This means we currently have a load of duplicate code to achieve these ends. If we have a uniform method for implementing test modules then we can reduce code duplication, ensure uniformity in the test framework, ease code maintenance, and reduce the work required to create tests. This all helps to encourage developers to write and run tests. Add a C header file that can be included in test modules. This provides a single point for common test functions/macros. Implement a few macros that make up the start of the test framework. Add documentation for new kselftest header to kselftest documentation. Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08kselftest: Add test runner creation scriptTobin C. Harding
Currently if we wish to use kselftest to run tests within a kernel module we write a small script to load/unload and do error reporting. There are a bunch of these under tools/testing/selftests/lib/ that are all identical except for the test name. We can reduce code duplication and improve maintainability if we have one version of this. However kselftest requires an executable for each test. We can move all the script logic to a central script then have each individual test script call the main script. Oneliner to call kselftest_module.sh courtesy of Kees, thanks! Add test runner creation script. Convert tools/testing/selftests/lib/*.sh to use new test creation script. Testing ------- Configure kselftests for lib/ then build and boot kernel. Then run kselftests as follows: $ cd /path/to/kernel/tree $ sudo make O=$output_path -C tools/testing/selftests TARGETS="lib" run_tests and also $ cd /path/to/kernel/tree $ cd tools/testing/selftests $ sudo make O=$output_path TARGETS="lib" run_tests and also $ cd /path/to/kernel/tree $ cd tools/testing/selftests $ sudo make TARGETS="lib" run_tests Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tobin C. Harding <tobin@kernel.org> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08selftests: fib_tests: Add tests for ipv6 gateway with ipv4 routeDavid Ahern
Add tests for ipv6 gateway with ipv4 route. Tests include basic single path with ping to verify connectivity and multipath. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08selftest/gpio: Remove duplicate headerSabyasachi Gupta
Remove duplicate header which are included twice. Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08selftest/rseq: Remove duplicate headerSabyasachi Gupta
Remove duplicate header which is included twice Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08selftest/timers: Remove duplicate headerSabyasachi Gupta
Remove duplicate header which is included twice. Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08selftest/x86/mpx-dig.c: Remove duplicate headerSabyasachi Gupta
Remove duplicate header which is included twice. Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Shuah Khan <shuah@kernel.org>
2019-04-08kselftests: extend nft_nat with inet family based nat hooksFlorian Westphal
With older nft versions, this will cause: [..] PASS: ipv6 ping to ns1 was ip6 NATted to ns2 /dev/stdin:4:30-31: Error: syntax error, unexpected to, expecting newline or semicolon ip daddr 10.0.1.99 dnat ip to 10.0.2.99 ^^ SKIP: inet nat tests PASS: ip IP masquerade for ns2 [..] as there is currently no way to detect if nft will be able to parse the inet format. redirect and masquerade tests need to be skipped in this case for inet too because nft userspace has overzealous family check and rejects their use in the inet family. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-08tools/testing/nvdimm: Retain security state after overwriteDave Jiang
Overwrite retains the security state after completion of operation. Fix nfit_test to reflect this so that the kernel can test the behavior it is more likely to see in practice. Fixes: 926f74802cb1 ("tools/testing/nvdimm: Add overwrite support for nfit_test") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-04-08selftests/ftrace: Add tracing/error_log testcaseTom Zanussi
Add a testcase verifying basic tracing/error_log functionality. Link: http://lkml.kernel.org/r/bf1c0d47a24672df945331462682d96296d1ab28.1554072478.git.tom.zanussi@linux.intel.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08selftests/ftrace: Remove trigger-extended-error-support testcaseTom Zanussi
Error handling has been moved to the common tracing/error_log, so this test is no longer valid. Link: http://lkml.kernel.org/r/876a98b21018814cbf46f0a3605ae0906c51d53c.1554072478.git.tom.zanussi@linux.intel.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08selftests/ftrace: Move kprobe/uprobe check_error() to test.d/functionsTom Zanussi
The k/uprobe_sytax_errors test case defines a check_error() function used to run a command and check the position of the caret in the output. This would be useful for other ftrace facilities too, so move it to test.d/functions for use by anyone. In the process, rename it to ftrace_errlog_check() and parametrize it for general use. Link: http://lkml.kernel.org/r/9f88080a06f1755811f69081926afe7e5cb53178.1554072478.git.tom.zanussi@linux.intel.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08selftests/ftrace: Add error_log testcase for probe errorsMasami Hiramatsu
Add error_log testcase for error logs on probe events. This tests most of error cases and checks the error position is correct. Link: http://lkml.kernel.org/r/63d695b74e0965988fa54ffa12beeb2c3475250d.1554072478.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> [tom.zanussi@linux.intel.com: changed >& redirection to 2>] Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-08xfrm: make xfrm modes builtinFlorian Westphal
after previous changes, xfrm_mode contains no function pointers anymore and all modules defining such struct contain no code except an init/exit functions to register the xfrm_mode struct with the xfrm core. Just place the xfrm modes core and remove the modules, the run-time xfrm_mode register/unregister functionality is removed. Before: text data bss dec filename 7523 200 2364 10087 net/xfrm/xfrm_input.o 40003 628 440 41071 net/xfrm/xfrm_state.o 15730338 6937080 4046908 26714326 vmlinux 7389 200 2364 9953 net/xfrm/xfrm_input.o 40574 656 440 41670 net/xfrm/xfrm_state.o 15730084 6937068 4046908 26714060 vmlinux The xfrm*_mode_{transport,tunnel,beet} modules are gone. v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6 ones rather than removing them. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-07selftests: add a tc matchall test caseNicolas Dichtel
This is a follow up of the commit 0db6f8befc32 ("net/sched: fix ->get helper of the matchall cls"). To test it: $ cd tools/testing/selftests/tc-testing $ ln -s ../plugin-lib/nsPlugin.py plugins/20-nsPlugin.py $ ./tdc.py -n -e 2638 Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06selftests: forwarding: test for bridge mcast traffic after report and leaveNikolay Aleksandrov
This test is split in two, the first part checks if a report creates a corresponding mdb entry and if traffic is properly forwarded to it, and the second part checks if the mdb entry is deleted after a leave and if traffic is *not* forwarded to it. Since the mcast querier is enabled we should see standard mcast snooping bridge behaviour. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.3 (git 2.53.0) at 2026-11-12 14:29:55 +0000