| Age | Commit message (Collapse) | Author |
|---|
|
Current tests all have init() functions that are guaranteed to succeed.
But upcoming tests will need to allocate memory, thus possibly failing.
This commit therefore handles init() function failure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The DEFINE_TORTURE_RANDOM_PERCPU() macro defines per-CPU random-number
generators for torture testing, but the seeds for each CPU's instance
will be identical if they are first used at the same time. This commit
therefore adds the CPU number to the mix when reseeding.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The rcu_tasks_need_gpcb() determines whether or not: (1) There are
callbacks needing another grace period, (2) There are callbacks ready
to be invoked, and (3) It would be a good time to shrink back down to a
single-CPU callback list. This third case is interesting because some
other CPU might be adding new callbacks, which might suddenly make this
a very bad time to be shrinking.
This is currently handled by requiring call_rcu_tasks_generic() to
enqueue callbacks under the protection of rcu_read_lock() and requiring
rcu_tasks_need_gpcb() to wait for an RCU grace period to elapse before
finalizing the transition. This works well in practice.
Unfortunately, the current code assumes that a grace period whose end is
detected by the poll_state_synchronize_rcu() in the second "if" condition
actually ended before the earlier code counted the callbacks queued on
CPUs other than CPU 0 (local variable "ncbsnz"). Given the current code,
it is possible that a long-delayed call_rcu_tasks_generic() invocation
will queue a callback on a non-zero CPU after these CPUs have had their
callbacks counted and zero has been stored to ncbsnz. Such a callback
would trigger the WARN_ON_ONCE() in the second "if" statement.
To see this, consider the following sequence of events:
o CPU 0 invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It sees at least one
callback queued on some other CPU, thus setting ncbsnz
to a non-zero value.
o CPU 1 invokes call_rcu_tasks_generic() and loads 42 from
->percpu_enqueue_lim. It therefore decides to enqueue its
callback onto CPU 1's callback list, but is delayed.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, and sees that its value is greater
than the value one. CPU 0 therefore starts the shift back
to a single callback list. It sets ->percpu_enqueue_lim to 1,
but CPU 1 has already read the old value of 42. It also gets
a grace-period state value from get_state_synchronize_rcu().
o CPU 0 sees that ncbsnz is non-zero in its second "if" statement,
so it declines to finalize the shrink operation.
o CPU 0 again invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It also sees that there are
no callback queued on any other CPU, and thus sets ncbsnz to zero.
o CPU 1 resumes execution and enqueues its callback onto its own
list. This invalidates the value of ncbsnz.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, but sees that its value is already
unity. It therefore does not get a new grace-period state value.
o CPU 0 sees that rcu_task_cb_adjust is non-zero, ncbsnz is zero,
and that poll_state_synchronize_rcu() says that the grace period
has completed. it therefore finalizes the shrink operation,
setting ->percpu_dequeue_lim to the value one.
o CPU 0 does a debug check, scanning the other CPUs' callback lists.
It sees that CPU 1's list has a callback, so it (rightly)
triggers the WARN_ON_ONCE(). After all, the new value of
->percpu_dequeue_lim says to not bother looking at CPU 1's
callback list, which means that this callback will never be
invoked. This can result in hangs and maybe even OOMs.
Based on long experience with rcutorture, this is an extremely
low-probability race condition, but it really can happen, especially in
preemptible kernels or within guest OSes.
This commit therefore checks for completion of the grace period
before counting callbacks. With this change, in the above failure
scenario CPU 0 would know not to prematurely end the shrink operation
because the grace period would not have completed before the count
operation started.
[ paulmck: Adjust grace-period end rather than adding RCU reader. ]
[ paulmck: Avoid spurious WARN_ON_ONCE() with ->percpu_dequeue_lim check. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The synchronize_rcu_tasks_rude() function invokes rcu_tasks_rude_wait_gp()
to wait one rude RCU-tasks grace period. The rcu_tasks_rude_wait_gp()
function in turn checks if there is only a single online CPU. If so, it
will immediately return, because a call to synchronize_rcu_tasks_rude()
is by definition a grace period on a single-CPU system. (We could
have blocked!)
Unfortunately, this check uses num_online_cpus() without synchronization,
which can result in too-short grace periods. To see this, consider the
following scenario:
CPU0 CPU1 (going offline)
migration/1 task:
cpu_stopper_thread
-> take_cpu_down
-> _cpu_disable
(dec __num_online_cpus)
->cpuhp_invoke_callback
preempt_disable
access old_data0
task1
del old_data0 .....
synchronize_rcu_tasks_rude()
task1 schedule out
....
task2 schedule in
rcu_tasks_rude_wait_gp()
->__num_online_cpus == 1
->return
....
task1 schedule in
->free old_data0
preempt_enable
When CPU1 decrements __num_online_cpus, its value becomes 1. However,
CPU1 has not finished going offline, and will take one last trip through
the scheduler and the idle loop before it actually stops executing
instructions. Because synchronize_rcu_tasks_rude() is mostly used for
tracing, and because both the scheduler and the idle loop can be traced,
this means that CPU0's prematurely ended grace period might disrupt the
tracing on CPU1. Given that this disruption might include CPU1 executing
instructions in memory that was just now freed (and maybe reallocated),
this is a matter of some concern.
This commit therefore removes that problematic single-CPU check from the
rcu_tasks_rude_wait_gp() function. This dispenses with the single-CPU
optimization, but there is no evidence indicating that this optimization
is important. In addition, synchronize_rcu_tasks_generic() contains a
similar optimization (albeit only for early boot), which also splats.
(As in exactly why are you invoking synchronize_rcu_tasks_rude() so
early in boot, anyway???)
It is OK for the synchronize_rcu_tasks_rude() function's check to be
unsynchronized because the only times that this check can evaluate to
true is when there is only a single CPU running with preemption
disabled.
While in the area, this commit also fixes a minor bug in which a
call to synchronize_rcu_tasks_rude() would instead be attributed to
synchronize_rcu_tasks().
[ paulmck: Add "synchronize_" prefix and "()" suffix. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d265 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Ever since the following commit:
5a41344a3d83 ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()")
SRCU doesn't rely anymore on preemption to be disabled in order to
modify the per-CPU counter. And even then it used to be done from the API
itself.
Therefore and after checking further, it appears to be safe to remove
the preemption disablement around __srcu_read_[un]lock() in
exit_tasks_rcu_start() and exit_tasks_rcu_finish()
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Make sure we don't need to look again into the depths of git blame in
order not to miss a subtle part about how rcu-tasks is dealing with
exiting tasks.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, test_rcu_tasks_callback() reads from the jiffies counter only
once when this function is invoked. This introduces inaccuracies because
of the latencies induced by the synchronize_rcu_tasks*() invocations.
This commit therefore re-reads the jiffies counter at the beginning
of each test, thus avoiding penalizing later tests for the latencies
induced by earlier tests.
Therefore, this commit at the start of each RCU Tasks test, re-fetch the
jiffies time as the runstart time.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Because there is not guaranteed to be a full memory barrier between
the ->srcu_unlock_count increment of an srcu_read_unlock() and the
->srcu_lock_count increment of the next srcu_read_lock(), this next
srcu_read_lock() is not guaranteed to see the effect of the index flip
just prior to this comment. However, this next srcu_read_lock() will
execute a full memory barrier, so the srcu_read_lock() after that is
guaranteed to see that index flip.
This guarantee is illustrated by the following diagram of events and
the litmus test following that.
------------------------------------------------------------------------
READER UPDATER
------------- ----------
// idx is initially 0.
srcu_flip() {
smp_mb();
// RSCS
srcu_read_unlock() {
smp_mb();
idx++; // P
smp_mb(); // QQ
}
srcu_readers_unlock_idx(0) {
,--counted------------ count all unlock[0]; // Q
|
unlock[0]++; // X
}
smp_mb();
srcu_read_lock() {
READ(idx) = 0; ,---- count all lock[0]; // contributes imbalance of 1.
lock[0]++; ----counted |
smp_mb(); // PP } |
} |
|
// RSCS not going to effect above scan
|
srcu_read_unlock() { |
smp_mb(); |
unlock[0]++; |
} |
/
/
srcu_read_lock() { |
READ(idx); // Y -----cannot be counted because of P (has to sample idx as 1)
lock[1]++;
...
}
------------------------------------------------------------------------
This makes it similar to the store buffer pattern. Using X, Y, P and Q
annotated above, we get:
------------------------------------------------------------------------
READER UPDATER
X (write) P (write)
smp_mb(); //PP smp_mb(); //QQ
Y (read) Q (read)
------------------------------------------------------------------------
ASCII art courtesy of Joel Fernandes.
Reported-by: Joel Fernandes <joel@joelfernandes.org>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The comment in srcu_readers_active_idx_check() following the smp_mb()
is out of date, hailing from a simpler time when preemption was disabled
across the bulk of __srcu_read_lock(). The fact that preemption was
disabled meant that the number of tasks that had fetched the old index
but not yet incremented counters was limited by the number of CPUs.
In our more complex modern times, the number of CPUs is no longer a limit.
This commit therefore updates this comment, additionally giving more
memory-ordering detail.
[ paulmck: Apply Nt->Nc feedback from Joel Fernandes. ]
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Reported-by: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The srcu_gp_start_if_needed() function now read-holds the srcu_struct
whose grace period is being started, which means that the corresponding
SRCU grace period cannot end. This in turn means that the SRCU
grace-period sequence number returned by rcu_seq_snap() cannot expire
during this time. And that means that the calls to rcu_seq_done() in
srcu_funnel_exp_start() and srcu_funnel_gp_start() can never return true.
This commit therefore removes these rcu_seq_done() checks, but adds checks
in kernels built with CONFIG_PROVE_RCU=y that splats if rcu_seq_done()
does somehow return true.
[ paulmck: Rearrange checks to handle kernels built with lockdep. ]
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: rcu@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds trivial test code for srcu_down_read() and
srcu_up_read().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
A grace-period sequence number contains two fields: counter and
state. SRCU_SNP_INIT_SEQ provides a guaranteed invalid value for
grace-period sequence numbers in newly allocated srcu_node structures'
->srcu_have_cbs[] and ->srcu_gp_seq_needed_exp fields. The point of the
comparison in srcu_invl_snp_seq() is not to detect invalid grace-period
sequence numbers in general, but rather to detect a newly allocated
srcu_node structure whose ->srcu_have_cbs[] and ->srcu_gp_seq_needed_exp
fields need to be brought into line with the srcu_struct structure's
->srcu_gp_seq field.
This commit therefore causes srcu_invl_snp_seq() to compare both fields
of the specified grace-period sequence number.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: <rcu@vger.kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Commit 994f706872e6 ("srcu: Make Tree SRCU able to operate without
snp_node array") assumes that cpu 0 is always online. However, there
really are situations when some other CPU is the boot CPU, for example,
when booting a kdump kernel with the maxcpus=1 boot parameter.
On PowerPC, the kdump kernel can hang as follows:
...
[ 1.740036] systemd[1]: Hostname set to <xyz.com>
[ 243.686240] INFO: task systemd:1 blocked for more than 122 seconds.
[ 243.686264] Not tainted 6.1.0-rc1 #1
[ 243.686272] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.686281] task:systemd state:D stack:0 pid:1 ppid:0 flags:0x00042000
[ 243.686296] Call Trace:
[ 243.686301] [c000000016657640] [c000000016657670] 0xc000000016657670 (unreliable)
[ 243.686317] [c000000016657830] [c00000001001dec0] __switch_to+0x130/0x220
[ 243.686333] [c000000016657890] [c000000010f607b8] __schedule+0x1f8/0x580
[ 243.686347] [c000000016657940] [c000000010f60bb4] schedule+0x74/0x140
[ 243.686361] [c0000000166579b0] [c000000010f699b8] schedule_timeout+0x168/0x1c0
[ 243.686374] [c000000016657a80] [c000000010f61de8] __wait_for_common+0x148/0x360
[ 243.686387] [c000000016657b20] [c000000010176bb0] __flush_work.isra.0+0x1c0/0x3d0
[ 243.686401] [c000000016657bb0] [c0000000105f2768] fsnotify_wait_marks_destroyed+0x28/0x40
[ 243.686415] [c000000016657bd0] [c0000000105f21b8] fsnotify_destroy_group+0x68/0x160
[ 243.686428] [c000000016657c40] [c0000000105f6500] inotify_release+0x30/0xa0
[ 243.686440] [c000000016657cb0] [c0000000105751a8] __fput+0xc8/0x350
[ 243.686452] [c000000016657d00] [c00000001017d524] task_work_run+0xe4/0x170
[ 243.686464] [c000000016657d50] [c000000010020e94] do_notify_resume+0x134/0x140
[ 243.686478] [c000000016657d80] [c00000001002eb18] interrupt_exit_user_prepare_main+0x198/0x270
[ 243.686493] [c000000016657de0] [c00000001002ec60] syscall_exit_prepare+0x70/0x180
[ 243.686505] [c000000016657e10] [c00000001000bf7c] system_call_vectored_common+0xfc/0x280
[ 243.686520] --- interrupt: 3000 at 0x7fffa47d5ba4
[ 243.686528] NIP: 00007fffa47d5ba4 LR: 0000000000000000 CTR: 0000000000000000
[ 243.686538] REGS: c000000016657e80 TRAP: 3000 Not tainted (6.1.0-rc1)
[ 243.686548] MSR: 800000000000d033 <SF,EE,PR,ME,IR,DR,RI,LE> CR: 42044440 XER: 00000000
[ 243.686572] IRQMASK: 0
[ 243.686572] GPR00: 0000000000000006 00007ffffa606710 00007fffa48e7200 0000000000000000
[ 243.686572] GPR04: 0000000000000002 000000000000000a 0000000000000000 0000000000000001
[ 243.686572] GPR08: 000001000c172dd0 0000000000000000 0000000000000000 0000000000000000
[ 243.686572] GPR12: 0000000000000000 00007fffa4ff4bc0 0000000000000000 0000000000000000
[ 243.686572] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 243.686572] GPR20: 0000000132dfdc50 000000000000000e 0000000000189375 0000000000000000
[ 243.686572] GPR24: 00007ffffa606ae0 0000000000000005 000001000c185490 000001000c172570
[ 243.686572] GPR28: 000001000c172990 000001000c184850 000001000c172e00 00007fffa4fedd98
[ 243.686683] NIP [00007fffa47d5ba4] 0x7fffa47d5ba4
[ 243.686691] LR [0000000000000000] 0x0
[ 243.686698] --- interrupt: 3000
[ 243.686708] INFO: task kworker/u16:1:24 blocked for more than 122 seconds.
[ 243.686717] Not tainted 6.1.0-rc1 #1
[ 243.686724] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 243.686733] task:kworker/u16:1 state:D stack:0 pid:24 ppid:2 flags:0x00000800
[ 243.686747] Workqueue: events_unbound fsnotify_mark_destroy_workfn
[ 243.686758] Call Trace:
[ 243.686762] [c0000000166736e0] [c00000004fd91000] 0xc00000004fd91000 (unreliable)
[ 243.686775] [c0000000166738d0] [c00000001001dec0] __switch_to+0x130/0x220
[ 243.686788] [c000000016673930] [c000000010f607b8] __schedule+0x1f8/0x580
[ 243.686801] [c0000000166739e0] [c000000010f60bb4] schedule+0x74/0x140
[ 243.686814] [c000000016673a50] [c000000010f699b8] schedule_timeout+0x168/0x1c0
[ 243.686827] [c000000016673b20] [c000000010f61de8] __wait_for_common+0x148/0x360
[ 243.686840] [c000000016673bc0] [c000000010210840] __synchronize_srcu.part.0+0xa0/0xe0
[ 243.686855] [c000000016673c30] [c0000000105f2c64] fsnotify_mark_destroy_workfn+0xc4/0x1a0
[ 243.686868] [c000000016673ca0] [c000000010174ea8] process_one_work+0x2a8/0x570
[ 243.686882] [c000000016673d40] [c000000010175208] worker_thread+0x98/0x5e0
[ 243.686895] [c000000016673dc0] [c0000000101828d4] kthread+0x124/0x130
[ 243.686908] [c000000016673e10] [c00000001000cd40] ret_from_kernel_thread+0x5c/0x64
[ 366.566274] INFO: task systemd:1 blocked for more than 245 seconds.
[ 366.566298] Not tainted 6.1.0-rc1 #1
[ 366.566305] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 366.566314] task:systemd state:D stack:0 pid:1 ppid:0 flags:0x00042000
[ 366.566329] Call Trace:
...
The above splat occurs because PowerPC really does use maxcpus=1
instead of nr_cpus=1 in the kernel command line. Consequently, the
(quite possibly non-zero) kdump CPU is the only online CPU in the kdump
kernel. SRCU unconditionally queues a sdp->work on cpu 0, for which no
worker thread has been created, so sdp->work will be never executed and
__synchronize_srcu() will never be completed.
This commit therefore replaces CPU ID 0 with get_boot_cpu_id() in key
places in Tree SRCU. Since the CPU indicated by get_boot_cpu_id()
is guaranteed to be online, this avoids the above splat.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
To: rcu@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Kernels built with the CONFIG_TREE_SRCU Kconfig option set and then
booted with rcupdate.rcu_self_test=1 and srcutree.convert_to_big=1 will
test Tree SRCU during early boot. The early_srcu structure's srcu_node
array will be allocated when init_srcu_struct_fields() is invoked,
but after the test completes this early_srcu structure will not be used.
This commit therefore invokes cleanup_srcu_struct() to free that srcu_node
structure.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This patch splits the lists of objects so as to avoid sending any
through RCU that have already been queued for more than one grace
period. These long-term-resident objects are immediately freed.
The remaining short-term-resident objects are queued for later freeing
using queue_rcu_work().
This change avoids delaying workqueue handlers with synchronize_rcu()
invocations. Yes, workqueue handlers are designed to handle blocking,
but avoiding blocking when unnecessary improves performance during
low-memory situations.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The schedule_delayed_monitor_work() function relies on the count of
objects queued into any given kfree_rcu_cpu structure. This count is
used to determine how quickly to schedule passing these objects to RCU.
There are three pipes where pointers can be placed. When any pipe is
offloaded, the kfree_rcu_cpu structure's ->count counter is set to zero,
which is wrong because the other pipes might still be non-empty.
This commit therefore maintains per-pipe counters, and introduces a
krc_count() helper to access the aggregate value of those counters.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The need_offload_krc() function is now lock-free, which gives the
compiler freedom to load old values from plain C-language loads from
the kfree_rcu_cpu struture's ->head pointer. This commit therefore
applied READ_ONCE() to these loads.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently all objects placed into a batch wait for a full grace period
to elapse after that batch is ready to send to RCU. However, this
can unnecessarily delay freeing of the first objects that were added
to the batch. After all, several RCU grace periods might have elapsed
since those objects were added, and if so, there is no point in further
deferring their freeing.
This commit therefore adds per-page grace-period snapshots which are
obtained from get_state_synchronize_rcu(). When the batch is ready
to be passed to call_rcu(), each page's snapshot is checked by passing
it to poll_state_synchronize_rcu(). If a given page's RCU grace period
has already elapsed, its objects are freed immediately by kvfree_rcu_bulk().
Otherwise, these objects are freed after a call to synchronize_rcu().
This approach requires that the pages be traversed in reverse order,
that is, the oldest ones first.
Test example:
kvm.sh --memory 10G --torture rcuscale --allcpus --duration 1 \
--kconfig CONFIG_NR_CPUS=64 \
--kconfig CONFIG_RCU_NOCB_CPU=y \
--kconfig CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y \
--kconfig CONFIG_RCU_LAZY=n \
--bootargs "rcuscale.kfree_rcu_test=1 rcuscale.kfree_nthreads=16 \
rcuscale.holdoff=20 rcuscale.kfree_loops=10000 \
torture.disable_onoff_at_boot" --trust-make
Before this commit:
Total time taken by all kfree'ers: 8535693700 ns, loops: 10000, batches: 1188, memory footprint: 2248MB
Total time taken by all kfree'ers: 8466933582 ns, loops: 10000, batches: 1157, memory footprint: 2820MB
Total time taken by all kfree'ers: 5375602446 ns, loops: 10000, batches: 1130, memory footprint: 6502MB
Total time taken by all kfree'ers: 7523283832 ns, loops: 10000, batches: 1006, memory footprint: 3343MB
Total time taken by all kfree'ers: 6459171956 ns, loops: 10000, batches: 1150, memory footprint: 6549MB
After this commit:
Total time taken by all kfree'ers: 8560060176 ns, loops: 10000, batches: 1787, memory footprint: 61MB
Total time taken by all kfree'ers: 8573885501 ns, loops: 10000, batches: 1777, memory footprint: 93MB
Total time taken by all kfree'ers: 8320000202 ns, loops: 10000, batches: 1727, memory footprint: 66MB
Total time taken by all kfree'ers: 8552718794 ns, loops: 10000, batches: 1790, memory footprint: 75MB
Total time taken by all kfree'ers: 8601368792 ns, loops: 10000, batches: 1724, memory footprint: 62MB
The reduction in memory footprint is well in excess of an order of
magnitude.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The need_offload_krc() function currently holds the krcp->lock in order
to safely check krcp->head. This commit removes the need for this lock
in that function by updating the krcp->head pointer using WRITE_ONCE()
macro so that readers can carry out lockless loads of that pointer.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The kvfree_rcu() code maintains lists of pages of pointers, but also a
singly linked list, with the latter being used when memory allocation
fails. Traversal of these two types of lists is currently open coded.
This commit simplifies the code by providing kvfree_rcu_bulk() and
kvfree_rcu_list() functions, respectively, to traverse these two types
of lists. This patch does not introduce any functional change.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit improves the readability and maintainability of the
kvfree_rcu() code by switching from an open-coded linked list to
the standard Linux-kernel circular doubly linked list. This patch
does not introduce any functional change.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently a kvfree_call_rcu() takes an offset within a structure as
a second parameter, so a helper such as a kvfree_rcu_arg_2() has to
convert rcu_head and a freed ptr to an offset in order to pass it. That
leads to an extra conversion on macro entry.
Instead of converting, refactor the code in way that a pointer that has
to be freed is passed directly to the kvfree_call_rcu().
This patch does not make any functional change and is transparent to
all kvfree_rcu() users.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit introduces the rcupdate.rcu_exp_stall_task_details kernel
boot parameter, which cause expedited RCU CPU stall warnings to dump
the stacks of any tasks blocking the current expedited grace period.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit tests synchronize_rcu() and synchronize_rcu_expedited()
at the end of rcu_init(), in addition to the test already at the
beginning of that function. These tests are run only in kernels built
with CONFIG_PROVE_RCU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_blocking_is_gp() invokes might_sleep() even during early
boot when interrupts are disabled and before the scheduler is scheduling.
This is at best an accident waiting to happen. Therefore, this commit
moves that might_sleep() under an rcu_scheduler_active check in order
to ensure that might_sleep() is not invoked unless sleeping might actually
happen.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The normal grace period's RCU CPU stall warnings are invoked from the
scheduling-clock interrupt handler, and can thus invoke smp_processor_id()
with impunity, which allows them to directly invoke dump_cpu_task().
In contrast, the expedited grace period's RCU CPU stall warnings are
invoked from process context, which causes the dump_cpu_task() function's
calls to smp_processor_id() to complain bitterly in debug kernels.
This commit therefore causes synchronize_rcu_expedited_wait() to disable
preemption around its call to dump_cpu_task().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit emphasizes the possibility of concurrent calls to
synchronize_rcu() and synchronize_rcu_expedited() causing one or
the other of the two grace periods being lost from the viewpoint of
poll_state_synchronize_rcu().
If you cannot afford to lose grace periods this way, you should
instead use the _full() variants of the polled RCU API, for
example, poll_state_synchronize_rcu_full().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, rcu_do_batch() sizes its batches based on the total number
of callbacks in the callback list. This can result in some strange
choices, for example, if there was 12,800 callbacks in the list, but
only 200 were ready to invoke, RCU would invoke 100 at a time (12,800
shifted down by seven bits).
A more measured approach would use the number that were actually ready
to invoke, an approach that has become feasible only recently given the
per-segment ->seglen counts in ->cblist.
This commit therefore bases the batch limit on the number of callbacks
ready to invoke instead of on the total number of callbacks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit consolidates the initialization and CPU-hotplug code at
the end of kernel/rcu/tree.c. This is strictly a code-motion commit.
No functionality has changed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Clean up kernel-doc complaints about function names and non-kernel-doc
comments in kernel/time/. Fixes these warnings:
kernel/time/time.c:479: warning: expecting prototype for set_normalized_timespec(). Prototype was for set_normalized_timespec64() instead
kernel/time/time.c:553: warning: expecting prototype for msecs_to_jiffies(). Prototype was for __msecs_to_jiffies() instead
kernel/time/timekeeping.c:1595: warning: contents before sections
kernel/time/timekeeping.c:1705: warning: This comment starts with '/**', but isn't a kernel-doc comment.
* We have three kinds of time sources to use for sleep time
kernel/time/timekeeping.c:1726: warning: This comment starts with '/**', but isn't a kernel-doc comment.
* 1) can be determined whether to use or not only when doing
kernel/time/tick-oneshot.c:21: warning: missing initial short description on line:
* tick_program_event
kernel/time/tick-oneshot.c:107: warning: expecting prototype for tick_check_oneshot_mode(). Prototype was for tick_oneshot_mode_active() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230103032849.12723-1-rdunlap@infradead.org
|
|
Size of the 'expect' array in the __report_matches is 1536 bytes, which
is exactly the default frame size warning limit of the xtensa
architecture.
As a result allmodconfig xtensa kernel builds with the gcc that does not
support the compiler plugins (which otherwise would push the said
warning limit to 2K) fail with the following message:
kernel/kcsan/kcsan_test.c:257:1: error: the frame size of 1680 bytes
is larger than 1536 bytes
Fix it by dynamically allocating the 'expect' array.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
|
|
sched_mm_cid_after_execve() does not expect NULL t->mm, but it may happen
if a usermodehelper kthread fails when attempting to execute a binary.
sched_mm_cid_fork() can be issued from a usermodehelper kthread, which
has t->flags PF_KTHREAD set.
Fixes: af7f588d8f73 ("sched: Introduce per-memory-map concurrency ID")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/oe-lkp/202212301353.5c959d72-yujie.liu@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Prevent the leaking of a debug timer in futex_waitv()
- A preempt-RT mutex locking fix, adding the proper acquire semantics
* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
|
|
Many of the structs recently added to track field info for linked-list
head are useful as-is for rbtree root. So let's do a mechanical renaming
of list_head-related types and fields:
include/linux/bpf.h:
struct btf_field_list_head -> struct btf_field_graph_root
list_head -> graph_root in struct btf_field union
kernel/bpf/btf.c:
list_head -> graph_root in struct btf_field_info
This is a nonfunctional change, functionality to actually use these
fields for rbtree will be added in further patches.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20221217082506.1570898-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Instead of counting on prior allocations to have sized allocations to
the next kmalloc bucket size, always perform a krealloc that is at least
ksize(dst) in size (which is a no-op), so the size can be correctly
tracked by all the various allocation size trackers (KASAN,
__alloc_size, etc).
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Link: https://lore.kernel.org/bpf/20221223094551.GA1439509@ubuntu
Fixes: ceb35b666d42 ("bpf/verifier: Use kmalloc_size_roundup() to match ksize() usage")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221223182836.never.866-kees@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix the system crash that happens when a task iterator travel through
vma of tasks.
In task iterators, we used to access mm by following the pointer on
the task_struct; however, the death of a task will clear the pointer,
even though we still hold the task_struct. That can cause an
unexpected crash for a null pointer when an iterator is visiting a
task that dies during the visit. Keeping a reference of mm on the
iterator ensures we always have a valid pointer to mm.
Co-developed-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reported-by: Nathan Slingerland <slinger@meta.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221216221855.4122288-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the scenario where livepatch and kretfunc coexist, the pageattr of
im->image is rox after arch_prepare_bpf_trampoline in
bpf_trampoline_update, and then modify_fentry or register_fentry returns
-EAGAIN from bpf_tramp_ftrace_ops_func, the BPF_TRAMP_F_ORIG_STACK flag
will be configured, and arch_prepare_bpf_trampoline will be re-executed.
At this time, because the pageattr of im->image is rox,
arch_prepare_bpf_trampoline will read and write im->image, which causes
a fault. as follows:
insmod livepatch-sample.ko # samples/livepatch/livepatch-sample.c
bpftrace -e 'kretfunc:cmdline_proc_show {}'
BUG: unable to handle page fault for address: ffffffffa0206000
PGD 322d067 P4D 322d067 PUD 322e063 PMD 1297e067 PTE d428061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 2 PID: 270 Comm: bpftrace Tainted: G E K 6.1.0 #5
RIP: 0010:arch_prepare_bpf_trampoline+0xed/0x8c0
RSP: 0018:ffffc90001083ad8 EFLAGS: 00010202
RAX: ffffffffa0206000 RBX: 0000000000000020 RCX: 0000000000000000
RDX: ffffffffa0206001 RSI: ffffffffa0206000 RDI: 0000000000000030
RBP: ffffc90001083b70 R08: 0000000000000066 R09: ffff88800f51b400
R10: 000000002e72c6e5 R11: 00000000d0a15080 R12: ffff8880110a68c8
R13: 0000000000000000 R14: ffff88800f51b400 R15: ffffffff814fec10
FS: 00007f87bc0dc780(0000) GS:ffff88803e600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa0206000 CR3: 0000000010b70000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bpf_trampoline_update+0x25a/0x6b0
__bpf_trampoline_link_prog+0x101/0x240
bpf_trampoline_link_prog+0x2d/0x50
bpf_tracing_prog_attach+0x24c/0x530
bpf_raw_tp_link_attach+0x73/0x1d0
__sys_bpf+0x100e/0x2570
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x5b/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With this patch, when modify_fentry or register_fentry returns -EAGAIN
from bpf_tramp_ftrace_ops_func, the pageattr of im->image will be reset
to nx+rw.
Cc: stable@vger.kernel.org
Fixes: 00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221224133146.780578-1-nashuiliang@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Comparing IDs exactly between two separate states is not just
suboptimal, but also incorrect in some cases. So update regs_exact()
check to do byte-by-byte memcmp() only up to id/ref_obj_id. For id and
ref_obj_id perform proper check_ids() checks, taking into account idmap.
This change makes more states equivalent improving insns and states
stats across a bunch of selftest BPF programs:
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
------------------------------------------- -------------------------------- --------- --------- -------------- ---------- ---------- -------------
cgrp_kfunc_success.bpf.linked1.o test_cgrp_get_release 141 137 -4 (-2.84%) 13 13 +0 (+0.00%)
cgrp_kfunc_success.bpf.linked1.o test_cgrp_xchg_release 142 139 -3 (-2.11%) 14 13 -1 (-7.14%)
connect6_prog.bpf.linked1.o connect_v6_prog 139 102 -37 (-26.62%) 9 6 -3 (-33.33%)
ima.bpf.linked1.o bprm_creds_for_exec 68 61 -7 (-10.29%) 6 5 -1 (-16.67%)
linked_list.bpf.linked1.o global_list_in_list 569 499 -70 (-12.30%) 60 52 -8 (-13.33%)
linked_list.bpf.linked1.o global_list_push_pop 167 150 -17 (-10.18%) 18 16 -2 (-11.11%)
linked_list.bpf.linked1.o global_list_push_pop_multiple 881 815 -66 (-7.49%) 74 63 -11 (-14.86%)
linked_list.bpf.linked1.o inner_map_list_in_list 579 534 -45 (-7.77%) 61 55 -6 (-9.84%)
linked_list.bpf.linked1.o inner_map_list_push_pop 190 181 -9 (-4.74%) 19 18 -1 (-5.26%)
linked_list.bpf.linked1.o inner_map_list_push_pop_multiple 916 850 -66 (-7.21%) 75 64 -11 (-14.67%)
linked_list.bpf.linked1.o map_list_in_list 588 525 -63 (-10.71%) 62 55 -7 (-11.29%)
linked_list.bpf.linked1.o map_list_push_pop 183 174 -9 (-4.92%) 18 17 -1 (-5.56%)
linked_list.bpf.linked1.o map_list_push_pop_multiple 909 843 -66 (-7.26%) 75 64 -11 (-14.67%)
map_kptr.bpf.linked1.o test_map_kptr 264 256 -8 (-3.03%) 26 26 +0 (+0.00%)
map_kptr.bpf.linked1.o test_map_kptr_ref 95 91 -4 (-4.21%) 9 8 -1 (-11.11%)
task_kfunc_success.bpf.linked1.o test_task_xchg_release 139 136 -3 (-2.16%) 14 13 -1 (-7.14%)
test_bpf_nf.bpf.linked1.o nf_skb_ct_test 815 509 -306 (-37.55%) 57 30 -27 (-47.37%)
test_bpf_nf.bpf.linked1.o nf_xdp_ct_test 815 509 -306 (-37.55%) 57 30 -27 (-47.37%)
test_cls_redirect.bpf.linked1.o cls_redirect 78925 78390 -535 (-0.68%) 4782 4704 -78 (-1.63%)
test_cls_redirect_subprogs.bpf.linked1.o cls_redirect 64901 63897 -1004 (-1.55%) 4612 4470 -142 (-3.08%)
test_sk_lookup.bpf.linked1.o access_ctx_sk 181 95 -86 (-47.51%) 19 10 -9 (-47.37%)
test_sk_lookup.bpf.linked1.o ctx_narrow_access 447 437 -10 (-2.24%) 38 37 -1 (-2.63%)
test_sk_lookup_kern.bpf.linked1.o sk_lookup_success 148 133 -15 (-10.14%) 14 12 -2 (-14.29%)
test_tcp_check_syncookie_kern.bpf.linked1.o check_syncookie_clsact 304 300 -4 (-1.32%) 23 22 -1 (-4.35%)
test_tcp_check_syncookie_kern.bpf.linked1.o check_syncookie_xdp 304 300 -4 (-1.32%) 23 22 -1 (-4.35%)
test_verify_pkcs7_sig.bpf.linked1.o bpf 87 76 -11 (-12.64%) 7 6 -1 (-14.29%)
------------------------------------------- -------------------------------- --------- --------- -------------- ---------- ---------- -------------
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extract byte-by-byte comparison of bpf_reg_state in regsafe() into
a helper function, which makes it more convenient to use it "on demand"
only for registers that benefit from such checks, instead of doing it
all the time, even if result of such comparison is ignored.
Also, remove WARN_ON_ONCE(1)+return false dead code. There is no risk of
missing some case as compiler will warn about non-void function not
returning value in some branches (and that under assumption that default
case is removed in the future).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Generalize the (somewhat implicit) rule of regsafe(), which states that
if register types in old and current states do not match *exactly*, they
can't be safely considered equivalent.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make generic check to prevent XXX_OR_NULL and XXX register types to be
intermixed. While technically in some situations it could be safe, it's
impossible to enforce due to the loss of an ID when converting
XXX_OR_NULL to its non-NULL variant. So prevent this in general, not
just for PTR_TO_MAP_KEY and PTR_TO_MAP_VALUE.
PTR_TO_MAP_KEY_OR_NULL and PTR_TO_MAP_VALUE_OR_NULL checks, which were
previously special-cased, are simplified to generic check that takes
into account range_within() and tnum_in(). This is correct as BPF
verifier doesn't allow arithmetic on XXX_OR_NULL register types, so
var_off and ranges should stay zero. But even if in the future this
restriction is lifted, it's even more important to enforce that var_off
and ranges are compatible, otherwise it's possible to construct case
where this can be exploited to bypass verifier's memory range safety
checks.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move id and ref_obj_id fields after scalar data section (var_off and
ranges). This is necessary to simplify next patch which will change
regsafe()'s logic to be safer, as it makes the contents that has to be
an exact match (type-specific parts, off, type, and var_off+ranges)
a single sequential block of memory, while id and ref_obj_id should
always be remapped and thus can't be memcp()'ed.
There are few places that assume that var_off is after id/ref_obj_id to
clear out id/ref_obj_id with the single memset(0). These are changed to
explicitly zero-out id/ref_obj_id fields. Other places are adjusted to
preserve exact byte-by-byte comparison behavior.
No functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
states_equal() check performs ID mapping between old and new states to
establish a 1-to-1 correspondence between IDs, even if their absolute
numberic values across two equivalent states differ. This is important
both for correctness and to avoid unnecessary work when two states are
equivalent.
With recent changes we partially fixed this logic by maintaining ID map
across all function frames. This patch also makes refsafe() check take
into account (and maintain) ID map, making states_equal() behavior more
optimal and correct.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221223054921.958283-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The archs that use cputime_to_nsecs() internally provide their own
definition and don't need the fallback. cputime_to_usecs() unused except
in this fallback, and is not defined anywhere.
This removes the final remnant of the cputime_t code from the kernel.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20221220070705.2958959-1-npiggin@gmail.com
|
|
When select_idle_capacity() starts scanning for an idle CPU, it starts
with target CPU that has already been checked in select_idle_sibling().
So we start checking from the next CPU and try the target CPU at the end.
Similarly for task_numa_assign(), we have just checked numa_migrate_on
of dst_cpu, so start from the next CPU. This also works for
steal_cookie_task(), the first scan must fail and start directly
from the next one.
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-3-jiahao.os@bytedance.com
|
|
In update_numa_stats() we try to find an idle cpu on the NUMA node,
preferably an idle core. we can stop looking for the next idle core
or idle cpu after finding an idle core. But we can't stop the
whole loop of scanning the CPU, because we need to calculate
approximate NUMA stats at a point in time. For example,
the src and dst nr_running is needed by task_numa_find_cpu().
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20221216062406.7812-2-jiahao.os@bytedance.com
|
|
With a modified container_of() that preserves constness, the compiler
finds some pointers which should have been marked as const. task_of()
also needs to become const-preserving for the !FAIR_GROUP_SCHED case so
that cfs_rq_of() can take a const argument. No change to generated code.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221212144946.2657785-1-willy@infradead.org
|
|
If a memory map has fewer threads than there are cores on the system, or
is limited to run on few cores concurrently through sched affinity or
cgroup cpusets, the concurrency IDs will be values close to 0, thus
allowing efficient use of user-space memory for per-cpu data structures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-9-mathieu.desnoyers@efficios.com
|
