| Age | Commit message (Collapse) | Author |
|---|
|
Add unconditional wrappers around the internal IIO mode lock.
As mentioned in the documentation, this is not meant to be used by
drivers, instead this will aid in the eventual addition of cleanup
classes around conditional locks.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Needed for some stubs to prevent build issues if !CONFIG_I3C
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue"
* tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
Octeontx2-af: Add proper checks for fwdata
dpll: Prevent duplicate registrations
net/sched: act_ife: avoid possible NULL deref
hinic3: Fix netif_queue_set_napi queue_index input parameter error
vsock/test: add stream TX credit bounds test
vsock/virtio: cap TX credit to local buffer size
vsock/test: fix seqpacket message bounds test
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
net: fec: account for VLAN header in frame length calculations
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
octeontx2-af: Fix error handling
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
rxrpc: Fix data-race warning and potential load/store tearing
net: dsa: fix off-by-one in maximum bridge ID determination
net: bcmasp: Fix network filter wake for asp-3.0
bonding: provide a net pointer to __skb_flow_dissect()
selftests: net: amt: wait longer for connection before sending packets
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning"
netrom: fix double-free in nr_route_frame()
...
|
|
The pipapo set backend is the only user of the .abort interface so far.
To speed up pipapo abort path, removals are skipped.
The follow up patch updates the rbtree to use to build an array of
ordered elements, then use binary search. This needs a new .abort
interface but, unlike pipapo, it also need to undo/remove elements.
Add a flag and use it from the pipapo set backend.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
devres_for_each_res() is only used by .../firmware_loader/main.c, which
already includes base.h.
The usage of devres_for_each_res() by code outside of driver-core is
questionable, hence move it to base.h.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260119162920.77189-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another set of updates:
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
* tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: ignore link disabled flag from userspace
wifi: mac80211: apply advertised TTLM from association response
wifi: mac80211: parse all TTLM entries
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
wifi: mac80211: don't perform DA check on S1G beacon
wifi: ath12k: Fix wrong P2P device link id issue
wifi: ath12k: fix dead lock while flushing management frames
wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel
wifi: ath12k: cancel scan only on active scan vdev
wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize()
wifi: mac80211: correctly check if CSA is active
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
wifi: rsi: Fix memory corruption due to not set vif driver data size
wifi: ath12k: don't force radio frequency check in freq_to_idx()
wifi: ath12k: fix dma_free_coherent() pointer
wifi: ath10k: fix dma_free_coherent() pointer
====================
Link: https://patch.msgid.link/20260122110248.15450-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AXP717 has some extra registers related to type-C CC pin
negotiation. They were missing from the original submission.
Add them for completeness.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251225080241.3153453-1-wens@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The TPS65214 PMIC variant has a LOCK_REG register that prevents writes to
nearly all registers when locked. Unlock the registers at probe time and
leave them unlocked permanently.
This approach is justified because:
- Register locking is very uncommon in typical system operation
- No code path is expected to lock the registers during runtime
- Adding a custom regmap write function would add overhead to every
register write, including voltage changes triggered by CPU OPP
transitions from the cpufreq governor which could happen quite
frequently
Cc: stable@vger.kernel.org
Fixes: 7947219ab1a2d ("mfd: tps65219: Add support for TI TPS65214 PMIC")
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251218-fix_tps65219-v5-1-8bb511417f3a@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
As there are some registers missing which are required for future charger
extensions, add them.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20251207085024.7375-1-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
tps6105x_mode
Fix spelling of an enum to fix a kernel-doc warning.
Fix kernel-doc of struct tps6105x to prevent kernel-doc warnings.
Warning: include/linux/mfd/tps6105x.h:68 Enum value 'TPS6105X_MODE_TORCH'
not described in enum 'tps6105x_mode'
Warning: include/linux/mfd/tps6105x.h:68 Excess enum value
'%TPS61905X_MODE_TORCH' description in 'tps6105x_mode'
Warning: include/linux/mfd/tps6105x.h:93 struct member 'pdata'
not described in 'tps6105x'
Warning: include/linux/mfd/tps6105x.h:93 struct member 'client'
not described in 'tps6105x'
Fixes: 798a8eee44da ("mfd: Add a core driver for TI TPS61050/TPS61052 chips v2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251125022750.3165569-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'ib-mfd-regulator-6.20' and 'ib-mfd-rtc-6.20' into ibs-for-mfd-merged
|
|
The main use of {LD,ST}64B* is to talk to a device, which is hopefully
directly assigned to the guest and requires no additional handling.
However, this does not preclude a VMM from exposing a virtual device
to the guest, and to allow 64 byte accesses as part of the programming
interface. A direct consequence of this is that we need to be able
to forward such access to userspace.
Given that such a contraption is very unlikely to ever exist, we choose
to offer a limited service: userspace gets (as part of a new exit reason)
the ESR, the IPA, and that's it. It is fully expected to handle the full
semantics of the instructions, deal with ACCDATA, the return values and
increment PC. Much fun.
A canonical implementation can also simply inject an abort and be done
with it. Frankly, don't try to do anything else unless you have time
to waste.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The rtnl lock might be locked, preventing ad_cond_set_peer_notif() from
acquiring the lock and updating send_peer_notif. This patch addresses
the issue by using a workqueue. Since updating send_peer_notif does
not require high real-time performance, such delayed updates are entirely
acceptable.
In fact, checking this value and using it in multiple places, all operations
are protected at the same time by rtnl lock, such as
- read send_peer_notif
- send_peer_notif--
- bond_should_notify_peers
By the way, rtnl lock is still required, when accessing bond.params.* for
updating send_peer_notif. In lacp mode, resetting send_peer_notif in
workqueue is safe, simple and effective way.
Additionally, this patch introduces bond_peer_notify_may_events(), which
is used to check whether an event should be sent. This function will be
used in both patch 1 and 2.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/f95accb5db0b10ce3ed2f834fc70f716c9abbb9c.1768709239.git.tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 2b69987be575 ("sched: Add
task_struct->faults_disabled_mapping"), which added this field without
review or maintainer signoff. With bcachefs removed from the
tree it is also unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260122085223.487092-1-hch@lst.de
|
|
Since glibc cares about the number of syscalls required to initialize a new
thread, allow initializing rseq with slice extension on. This avoids having to
do another prctl().
Requested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260121143207.814193010@infradead.org
|
|
Provide the actual decision function, which decides whether a time slice
extension is granted in the exit to user mode path when NEED_RESCHED is
evaluated.
The decision is made in two stages. First an inline quick check to avoid
going into the actual decision function. This checks whether:
#1 the functionality is enabled
#2 the exit is a return from interrupt to user mode
#3 any TIF bit, which causes extra work is set. That includes TIF_RSEQ,
which means the task was already scheduled out.
The slow path, which implements the actual user space ABI, is invoked
when:
A) #1 is true, #2 is true and #3 is false
It checks whether user space requested a slice extension by setting
the request bit in the rseq slice_ctrl field. If so, it grants the
extension and stores the slice expiry time, so that the actual exit
code can double check whether the slice is already exhausted before
going back.
B) #1 - #3 are true _and_ a slice extension was granted in a previous
loop iteration
In this case the grant is revoked.
In case that the user space access faults or invalid state is detected, the
task is terminated with SIGSEGV.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155709.195303303@linutronix.de
|
|
When a time slice extension was granted in the need_resched() check on exit
to user space, the task can still be scheduled out in one of the other
pending work items. When it gets scheduled back in, and need_resched() is
not set, then the stale grant would be preserved, which is just wrong.
RSEQ already keeps track of that and sets TIF_RSEQ, which invokes the
critical section and ID update mechanisms.
Utilize them and clear the user space slice control member of struct rseq
unconditionally within the existing user access sections. That's just an
unconditional store more in that path.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251215155709.131081527@linutronix.de
|
|
If a time slice extension is granted and the reschedule delayed, the kernel
has to ensure that user space cannot abuse the extension and exceed the
maximum granted time.
It was suggested to implement this via the existing hrtick() timer in the
scheduler, but that turned out to be problematic for several reasons:
1) It creates a dependency on CONFIG_SCHED_HRTICK, which can be disabled
independently of CONFIG_HIGHRES_TIMERS
2) HRTICK usage in the scheduler can be runtime disabled or is only used
for certain aspects of scheduling.
3) The function is calling into the scheduler code and that might have
unexpected consequences when this is invoked due to a time slice
enforcement expiry. Especially when the task managed to clear the
grant via sched_yield(0).
It would be possible to address #2 and #3 by storing state in the
scheduler, but that is extra complexity and fragility for no value.
Implement a dedicated per CPU hrtimer instead, which is solely used for the
purpose of time slice enforcement.
The timer is armed when an extension was granted right before actually
returning to user mode in rseq_exit_to_user_mode_restart().
It is disarmed, when the task relinquishes the CPU. This is expensive as
the timer is probably the first expiring timer on the CPU, which means it
has to reprogram the hardware. But that's less expensive than going through
a full hrtimer interrupt cycle for nothing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251215155709.068329497@linutronix.de
|
|
The kernel sets SYSCALL_WORK_RSEQ_SLICE when it grants a time slice
extension. This allows to handle the rseq_slice_yield() syscall, which is
used by user space to relinquish the CPU after finishing the critical
section for which it requested an extension.
In case the kernel state is still GRANTED, the kernel resets both kernel
and user space state with a set of sanity checks. If the kernel state is
already cleared, then this raced against the timer or some other interrupt
and just clears the work bit.
Doing it in syscall entry work allows to catch misbehaving user space,
which issues an arbitrary syscall, i.e. not rseq_slice_yield(), from the
critical section. Contrary to the initial strict requirement to use
rseq_slice_yield() arbitrary syscalls are not considered a violation of the
ABI contract anymore to allow onion architecture applications, which cannot
control the code inside a critical section, to utilize this as well.
If the code detects inconsistent user space that result in a SIGSEGV for
the application.
If the grant was still active and the task was not preempted yet, the work
code reschedules immediately before continuing through the syscall.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155709.005777059@linutronix.de
|
|
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
|
|
Implement a prctl() so that tasks can enable the time slice extension
mechanism. This fails, when time slice extensions are disabled at compile
time or on the kernel command line and when no rseq pointer is registered
in the kernel.
That allows to implement a single trivial check in the exit to user mode
hotpath, to decide whether the whole mechanism needs to be invoked.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.858717691@linutronix.de
|
|
Extend the quick statistics with time slice specific fields.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.795202254@linutronix.de
|
|
Guard the time slice extension functionality with a static key, which can
be disabled on the kernel command line.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.733429292@linutronix.de
|
|
Aside of a Kconfig knob add the following items:
- Two flag bits for the rseq user space ABI, which allow user space to
query the availability and enablement without a syscall.
- A new member to the user space ABI struct rseq, which is going to be
used to communicate request and grant between kernel and user space.
- A rseq state struct to hold the kernel state of this
- Documentation of the new mechanism
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.669472597@linutronix.de
|
|
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1e372b246199ca7a35f930177fea91b557dac16e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix ARM64 port of the MSHV driver (Anirudh Rayabharam)
- Fix huge page handling in the MSHV driver (Stanislav Kinsburskii)
- Minor fixes to driver code (Julia Lawall, Michael Kelley)
* tag 'hyperv-fixes-signed-20260121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: handle gpa intercepts for arm64
mshv: add definitions for arm64 gpa intercepts
mshv: Add __user attribute to argument passed to access_ok()
mshv: Store the result of vfs_poll in a variable of type __poll_t
mshv: Align huge page stride with guest mapping
Drivers: hv: Always do Hyper-V panic notification in hv_kmsg_dump()
Drivers: hv: vmbus: fix typo in function name reference
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
Subject: netfilter: updates for net-next
1) Speed up nftables transactions after earlier transaction failed.
Due to a (harmeless) bug we remained in slow paranoia mode until
a successful transaction completes.
2) Allow generic tracker to resolve clashes, this avoids very rare
packet drops. From Yuto Hamaguchi.
3) Increase the cleanup budget to 64 entries in nf_conncount to reap
more entries in one go, from Fernando Fernandez Mancera.
4) Allow icmp trackers to resolve clashes, this avoids very rare
initial packet drop with test cases that have high-frequency pings.
After this all trackers except tcp and sctp allow clash resolution.
5) Disentangle netfilter headers, don't include nftables/xtables headers
in subsystems that are unrelated.
6) Don't rely on implicit includes coming from nf_conntrack_proto_gre.h.
7) Allow nfnetlink_queue nfq instance struct to get accounted via memcg,
from Scott Mitchell.
8) Reject bogus xt target/match data upfront via netlink policiy in
nft_compat interface rather than relying on x_tables API to do it.
9) Fix nf_conncount breakage when trying to limit loopback flows via
prerouting rule, from Fernando Fernandez Mancera.
This is a recent breakage but not seen as urgent enough to rush this
via net tree at this late stage in development cycle.
10) Fix a possible off-by-one when parsing tcp option in xtables tcpmss
match. Also handled via -next due to late stage in development
cycle.
* tag 'nf-next-26-01-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: xt_tcpmss: check remaining length before reading optlen
netfilter: nf_conncount: fix tracking of connections from localhost
netfilter: nft_compat: add more restrictions on netlink attributes
netfilter: nfnetlink_queue: nfqnl_instance GFP_ATOMIC -> GFP_KERNEL_ACCOUNT allocation
netfilter: nf_conntrack: don't rely on implicit includes
netfilter: don't include xt and nftables.h in unrelated subsystems
netfilter: nf_conntrack: enable icmp clash support
netfilter: nf_conncount: increase the connection clean up limit to 64
netfilter: nf_conntrack: Add allow_clash to generic protocol handler
netfilter: nf_tables: reset table validation state on abort
====================
Link: https://patch.msgid.link/20260120191803.22208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some drivers of MAC + tightly integrated PCS (example: SJA1105 + XPCS
covered by same reset domain) need to perform resets at runtime.
The reset is triggered by the MAC driver, and it needs to restore its
and the PCS' registers, all invisible to phylink.
However, there is a desire to simplify the API through which the MAC and
the PCS interact, so this becomes challenging.
Phylink holds all the necessary state to help with this operation, and
can offer two helpers which walk the MAC and PCS drivers again through
the callbacks required during a destructive reset operation. The
procedure is as follows:
Before reset, MAC driver calls phylink_replay_link_begin():
- Triggers phylink mac_link_down() and pcs_link_down() methods
After reset, MAC driver calls phylink_replay_link_end():
- Triggers phylink mac_config() -> pcs_config() -> mac_link_up() ->
pcs_link_up() methods.
MAC and PCS registers are restored with no other custom driver code.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260119121954.1624535-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Mediatek LynxI PCS is used from the MT7530 DSA driver (where it does
not have an OF presence) and from mtk_eth_soc, where it does
(Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
informs of a combined clock provider + SGMII PCS "SGMIISYS" syscon
block).
Currently, mtk_eth_soc parses the SGMIISYS OF node for the
"mediatek,pnswap" property and sets a bit in the "flags" argument of
mtk_pcs_lynxi_create() if set.
I'd like to deprecate "mediatek,pnswap" in favour of a property which
takes the current phy-mode into consideration. But this is only known at
mtk_pcs_lynxi_config() time, and not known at mtk_pcs_lynxi_create(),
when the SGMIISYS OF node is parsed.
To achieve that, we must pass the OF node of the PCS, if it exists, to
mtk_pcs_lynxi_create(), and let the PCS take a reference on it and
handle property parsing whenever it wants.
Use the fwnode API which is more general than OF (in case we ever need
to describe the PCS using some other format). This API should be NULL
tolerant, so add no particular tests for the mt7530 case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove one function call from GRO stack for native IPv6 + TCP packets.
$ scripts/bloat-o-meter -t vmlinux.2 vmlinux.3
add/remove: 0/0 grow/shrink: 1/1 up/down: 298/-5 (293)
Function old new delta
ipv6_gro_complete 435 733 +298
tcp6_gro_complete 311 306 -5
Total: Before=22593532, After=22593825, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FDO/LTO are unable to inline tcp6_gro_receive() from ipv6_gro_receive()
Make sure tcp6_check_fraglist_gro() is only called only when needed,
so that compiler can leave it out-of-line.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 2/0 grow/shrink: 3/1 up/down: 1123/-253 (870)
Function old new delta
ipv6_gro_receive 1069 1846 +777
tcp6_check_fraglist_gro - 272 +272
ipv6_offload_init 218 274 +56
__pfx_tcp6_check_fraglist_gro - 16 +16
ipv6_gro_complete 433 435 +2
tcp6_gro_receive 959 706 -253
Total: Before=22592662, After=22593532, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clang does not inline this helper in GRO fast path.
We can save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 156/-218 (-62)
Function old new delta
tcp6_gro_complete 227 311 +84
tcp4_gro_complete 325 397 +72
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 186 - -186
Total: Before=22592724, After=22592662, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can change tcp_rsk() and inet_rsk() to propagate their argument
const qualifier thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260120125353.1470456-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'add-devm_clk_bulk_get_optional_enable-helper-and-use-in-axi-ethernet-driver'
Suraj Gupta says:
====================
Add devm_clk_bulk_get_optional_enable() helper and use in AXI Ethernet driver
This patch series introduces a new managed clock framework helper function
and demonstrates its usage in AXI ethernet driver.
Device drivers frequently need to get optional bulk clocks, prepare them,
and enable them during probe, while ensuring automatic cleanup on device
unbind. Currently, this requires three separate operations with manual
cleanup handling.
The new devm_clk_bulk_get_optional_enable() helper combines these
operations into a single managed call, eliminating boilerplate code and
following the established pattern of devm_clk_bulk_get_all_enabled().
====================
Link: https://patch.msgid.link/20260116192725.972966-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new managed clock framework helper function that combines getting
optional bulk clocks and enabling them in a single operation.
The devm_clk_bulk_get_optional_enable() function simplifies the common
pattern where drivers need to get optional bulk clocks, prepare and enable
them, and have them automatically disabled/unprepared and freed when the
device is unbound.
This new API follows the established pattern of
devm_clk_bulk_get_all_enabled() and reduces boilerplate code in drivers
that manage multiple optional clocks.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260116192725.972966-2-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A previous commit got rid of any use of this member, but forgot to
remove it. Kill it.
Fixes: f4bb2f65bb81 ("io_uring/eventfd: move ctx->evfd_last_cq_tail into io_ev_fd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main changes are devicetree updates for qualcomm and rockchips
arm64 platforms, fixing minor mistakes in SoC and board specific
settings:
- GPIO settings for Pinephone Pro buttons
- Register ranges for rk3576 GPU
- Power domains on sc8280xp
- Clocks on qcom talos
- dtc warnings for extraneous properties, nonstandard node names and
undocument identifiers
The Tegra210 platform gets a single revert for a devicetree change
that caused a 6.19 regression.
On 32-bit Arm, we have trivial fixes for Microchip SAMA7 devicetree
files and NPCM Kconfig, as well as Andrew Jeffery being officially
listed as MAINTAINER for NPCM.
A single driver fix is for Qualcomm RPMHD power domains, bringing the
driver up to date with a devicetree change that added additional power
domains to be enabled"
* tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
MAINTAINERS: Add Andrew as M: to ARM/NUVOTON NPCM ARCHITECTURE
MAINTAINERS: update email address for Yixun Lan
Revert "arm64: tegra: Add interconnect properties for Tegra210"
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
arm: npcm: drop unused Kconfig ERRATA symbol
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
...
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
On new Dell models the driver must read a UEFI variable to get a
variant identifier for the audio hardware. Without this, the driver
cannot know which firmware file to load to the amps.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.20
Support multiple wait queues in the SCM firmware interface and provide
discovery of the wait queue interrupt to deal with the cases where
bootloader didn't patch the DeviceTree with the IRQ information.
Refactor the MDT loader and the SCM driver's peripheral authentication
service interface and introduce support for passing a remoteproc
resource table to the firmware. The remoteproc patches that uses this
and uses this to configure the IOMMU are included here due to
bidirectional dependencies. The end result is remoteproc support on the
Glymur platform.
Enable QSEECOM and thereby UEFI variable access, on the Surface Pro 11.
Make the QMI interface endianness aware, to support ath1Xk on big endian
machines.
Add the Glymur support in LLCC driver.
* tag 'qcom-drivers-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: preserve CPU endianness for QMI_DATA_LEN
soc: qcom: fix QMI encoding/decoding for basic elements
soc: qcom: check QMI basic element error codes
soc: qcom: ubwc: add missing include
remoteproc: qcom: pas: Enable Secure PAS support with IOMMU managed by Linux
remoteproc: pas: Extend parse_fw callback to fetch resources via SMC call
firmware: qcom_scm: Add qcom_scm_pas_get_rsc_table() to get resource table
firmware: qcom_scm: Add SHM bridge handling for PAS when running without QHEE
firmware: qcom_scm: Refactor qcom_scm_pas_init_image()
firmware: qcom_scm: Add a prep version of auth_and_reset function
soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported symbols
soc: qcom: mdtloader: Add PAS context aware qcom_mdt_pas_load() function
remoteproc: pas: Replace metadata context with PAS context structure
firmware: qcom_scm: Introduce PAS context allocator helper function
firmware: qcom_scm: Rename peripheral as pas_id
firmware: qcom_scm: Remove redundant piece of code
dt-bindings: remoteproc: qcom,pas: Add iommus property
soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe
soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications
dt-bindings: qcom,pdc: document the Milos Power Domain Controller
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers changes for 6.20:
- A few changes from Peng Fan adding dump syslog support for i.MX
System Manager firmware driver, cleaning up soc-imx9 driver, fixing
error handling for soc-imx8m driver
* tag 'imx-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Fix error handling for clk_prepare_enable()
soc: imx: Spport i.MX9[4,52]
soc: imx: Use dev_err_probe() for i.MX9
soc: imx: Use device-managed APIs for i.MX9
firmware: imx: sm-misc: Dump syslog info
firmware: arm_scmi: imx: Support getting syslog of MISC protocol
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: Changes for v6.20-rc1
This series primarily refactors the Tegra PMC driver to eliminate
reliance on a global variable, transitioning to passing the tegra_pmc
context explicitly across clocks, powergates, sysfs/debugfs interfaces,
and power management callbacks. Additionally, it resolves a warning
during system resume by deferring an unsafe generic_handle_irq() call to
a hard IRQ context using irq_work.
* tag 'tegra-for-6.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add PMC contextual functions
soc/tegra: pmc: Do not rely on global variable
soc/tegra: pmc: Use driver-private data
soc/tegra: pmc: Use PMC context embedded in powergates
soc/tegra: pmc: Pass PMC context as debugfs data
soc/tegra: pmc: Pass PMC context via sys-off callback data
soc/tegra: pmc: Embed reboot notifier in PMC context
soc/tegra: pmc: Store PMC context in clocks
soc/tegra: pmc: Pass struct tegra_pmc to tegra_powergate_state()
soc/tegra: pmc: Use contextual data instead of global variable
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.20
1. Several improvements in Exynos ChipID Socinfo driver and finally
adding Google GS101 SoC support.
2. Few cleanups from old code.
3. Documenting Axis Artpec-9 SoC PMU (Power Management Unit).
* tag 'samsung-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: remove a leftover hwmon-s3c.h header file
dt-bindings: soc: samsung: exynos-pmu: Drop unnecessary select schema
soc: samsung: exynos-chipid: add google,gs101-otp support
soc: samsung: exynos-chipid: downgrade dev_info to dev_dbg for soc info
soc: samsung: exynos-chipid: rename method
dt-bindings: nvmem: add google,gs101-otp
soc: samsung: exynos-chipid: use dev_err_probe where appropiate
soc: samsung: exynos-chipid: use devm action to unregister soc device
dt-bindings: samsung: exynos-pmu: Add compatible for ARTPEC-9 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE sysfs for 6.20
- Add an optional generic sysfs attribute for TEE revision
- Implement revision reporting for OP-TEE using both SMC and FF-A ABIs
* tag 'tee-sysfs-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: store OS revision for TEE core
tee: add revision sysfs attribute
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE bus callback for 6.20
- Move from generic device_driver to TEE bus-specific callbacks
- Add module_tee_client_driver() and registration helpers to reduce
boilerplate
- Convert several client drivers (TPM, KEYS, firmware, EFI, hwrng,
and RTC)
- Update documentation and fix kernel-doc warnings
* tag 'tee-bus-callback-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tpm/tpm_ftpm_tee: Fix kdoc after function renames
tpm/tpm_ftpm_tee: Make use of tee bus methods
tpm/tpm_ftpm_tee: Make use of tee specific driver registration
KEYS: trusted: Make use of tee bus methods
KEYS: trusted: Migrate to use tee specific driver registration function
firmware: tee_bnxt: Make use of tee bus methods
firmware: tee_bnxt: Make use of module_tee_client_driver()
firmware: arm_scmi: Make use of tee bus methods
firmware: arm_scmi: optee: Make use of module_tee_client_driver()
efi: stmm: Make use of tee bus methods
efi: stmm: Make use of module_tee_client_driver()
hwrng: optee - Make use of tee bus methods
hwrng: optee - Make use of module_tee_client_driver()
rtc: optee: Make use of tee bus methods
rtc: optee: Migrate to use tee specific driver registration function
tee: Adapt documentation to cover recent additions
tee: Add probe, remove and shutdown bus callbacks to tee_client_driver
tee: Add some helpers to reduce boilerplate for tee client drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.20 (take two)
- Add and use for_each_of_imap_item() iterator,
- Add support for the RZ/N1 GPIO Interrupt Multiplexer.
* tag 'renesas-drivers-for-v6.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Add support for RZ/N1 GPIO Interrupt Multiplexer
irqchip/renesas-rza1: Use for_each_of_imap_item iterator
irqchip/ls-extirq: Use for_each_of_imap_item iterator
of: unittest: Add a test case for for_each_of_imap_item iterator
of/irq: Introduce for_each_of_imap_item
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts commit 5f0bf80cc5e04d31eeb201683e0b477c24bd18e7.
This was asked to be reverted as it is not the correct way to do this.
Fixes: 5f0bf80cc5e0 ("mmc: rtsx_pci: add quirk to disable MMC_CAP_AGGRESSIVE_PM for RTS525A")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit eac85fbd0867c25ac517f58fae401d65c627edff.
This is not the correct change, so revert it for now.
Fixes: eac85fbd0867 ("mmc: rtsx: reset power state on suspend")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Linux 6.19 merge window added the new BLKREPORTZONESV2 ioctl, and
with it the new BLK_ZONE_REP_CACHED and BLK_ZONE_COND_ACTIVE constants.
The two constants are defined as part of enums, which makes it very
painful for userspace to discover if they are present in the installed
system headers.
Use the #define to the same name trick to make them trivially
discoverable using CPP directives.
Fixes: 0bf0e2e46668 ("block: track zone conditions")
Fixes: b30ffcdc0c15 ("block: introduce BLKREPORTZONESV2 ioctl")
Reported-by: Andrey Albershteyn <aalbersh@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The vdpu381 decoder found on newer Rockchip SoC need the information
from the long term and short term ref pic sets from the SPS.
So far, it wasn't included in the v4l2 API, so add it with new dynamic
sized controls.
Each element of the hevc_ext_sps_lt_rps array contains the long term ref
pic set at that index.
Each element of the hevc_ext_sps_st_rps contains the short term ref pic
set at that index, as the raw data.
It is the role of the drivers to calculate the reference sets values.
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a function cs_amp_devm_get_vendor_specific_variant_id() to return
a vendor-specific hardware identifier string (if there is one) and use
it to fetch an identifier from Dell SSIDExV2 UEFI variable content.
Dell use the same PCI SSID on multiple products that might have different
audio hardware and thus need different firmware for the amplifier DSP.
The SSIDExV2 string contains additional system identifiers, and the
second field is a 2-character audio hardware identifier.
There are older Dell models with Cirrus Logic amplifiers that have the
SSIDExV2 UEFI variable but do not have the 2-character audio ID in the
second field. The SSIDExV2 is ignored if the second field is not
2 characters.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260121132243.1256019-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
