summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-10-25media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'Hans Verkuil
If it is a progressive (non-interlaced) format, then ignore the interlaced timing values. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25netfilter: nft_inner: add geneve supportPablo Neira Ayuso
Geneve tunnel header may contain options, parse geneve header and update offset to point to the link layer header according to the opt_len field. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_meta: add inner match supportPablo Neira Ayuso
Add support for inner meta matching on: - NFT_META_PROTOCOL: to match on the ethertype, this can be used regardless tunnel protocol provides no link layer header, in that case nft_inner sets on the ethertype based on the IP header version field. - NFT_META_L4PROTO: to match on the layer 4 protocol. These meta expression are usually autogenerated as dependencies by userspace nftables. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_inner: add percpu inner contextPablo Neira Ayuso
Add NFT_PKTINFO_INNER_FULL flag to annotate that inner offsets are available. Store nft_inner_tun_ctx object in percpu area to cache existing inner offsets for this skbuff. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_inner: support for inner tunnel header matchingPablo Neira Ayuso
This new expression allows you to match on the inner headers that are encapsulated by any of the existing tunneling protocols. This expression parses the inner packet to set the link, network and transport offsets, so the existing expressions (with a few updates) can be reused to match on the inner headers. The inner expression supports for different tunnel combinations such as: - ethernet frame over IPv4/IPv6 packet, eg. VxLAN. - IPv4/IPv6 packet over IPv4/IPv6 packet, eg. IPIP. - IPv4/IPv6 packet over IPv4/IPv6 + transport header, eg. GRE. - transport header (ESP or SCTP) over transport header (usually UDP) The following fields are used to describe the tunnel protocol: - flags, which describe how to parse the inner headers: NFT_PAYLOAD_CTX_INNER_TUN, the tunnel provides its own header. NFT_PAYLOAD_CTX_INNER_ETHER, the ethernet frame is available as inner header. NFT_PAYLOAD_CTX_INNER_NH, the network header is available as inner header. NFT_PAYLOAD_CTX_INNER_TH, the transport header is available as inner header. For example, VxLAN sets on all of these flags. While GRE only sets on NFT_PAYLOAD_CTX_INNER_NH and NFT_PAYLOAD_CTX_INNER_TH. Then, ESP over UDP only sets on NFT_PAYLOAD_CTX_INNER_TH. The tunnel description is composed of the following attributes: - header size: in case the tunnel comes with its own header, eg. VxLAN. - type: this provides a hint to userspace on how to delinearize the rule. This is useful for VxLAN and Geneve since they run over UDP, since transport does not provide a hint. This is also useful in case hardware offload is ever supported. The type is not currently interpreted by the kernel. - expression: currently only payload supported. Follow up patch adds also inner meta support which is required by autogenerated dependencies. The exthdr expression should be supported too at some point. There is a new inner_ops operation that needs to be set on to allow to use an existing expression from the inner expression. This patch adds a new NFT_PAYLOAD_TUN_HEADER base which allows to match on the tunnel header fields, eg. vxlan vni. The payload expression is embedded into nft_inner private area and this private data area is passed to the payload inner eval function via direct call. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_objref: make it builtinFlorian Westphal
nft_objref is needed to reference named objects, it makes no sense to disable it. Before: text data bss dec filename 4014 424 0 4438 nft_objref.o 4174 1128 0 5302 nft_objref.ko 359351 15276 864 375491 nf_tables.ko After: text data bss dec filename 3815 408 0 4223 nft_objref.o 363161 15692 864 379717 nf_tables.ko Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nf_tables: reduce nft_pktinfo by 8 bytesFlorian Westphal
structure is reduced from 32 to 24 bytes. While at it, also check that iphdrlen is sane, this is guaranteed for NFPROTO_IPV4 but not for ingress or bridge, so add checks for this. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25netfilter: nft_payload: move struct nft_payload_set definition where it belongsPablo Neira Ayuso
Not required to expose this header in nf_tables_core.h, move it to where it is used, ie. nft_payload. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-10-25media: v4l: ctrls: Add a control for HDR modeBenjamin Mugnier
Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the sensor, and its documentation. Menu items are not standardized as they differ for each sensors. Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: v4l: Add 1X16 16-bit greyscale media bus code definitionBenjamin Mugnier
This extends the greyscale media bus family originally from MEDIA_BUS_FMT_Y8_1X8 up to MEDIA_BUS_FMT_Y14_1X14 by adding MEDIA_BUS_FMT_Y16_1X16, and behaves the same way with 16 bits. Add its documentation in subdev-formats.rst Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25soreuseport: Fix socket selection for SO_INCOMING_CPU.Kuniyuki Iwashima
Kazuho Oku reported that setsockopt(SO_INCOMING_CPU) does not work with setsockopt(SO_REUSEPORT) since v4.6. With the combination of SO_REUSEPORT and SO_INCOMING_CPU, we could build a highly efficient server application. setsockopt(SO_INCOMING_CPU) associates a CPU with a TCP listener or UDP socket, and then incoming packets processed on the CPU will likely be distributed to the socket. Technically, a socket could even receive packets handled on another CPU if no sockets in the reuseport group have the same CPU receiving the flow. The logic exists in compute_score() so that a socket will get a higher score if it has the same CPU with the flow. However, the score gets ignored after the blamed two commits, which introduced a faster socket selection algorithm for SO_REUSEPORT. This patch introduces a counter of sockets with SO_INCOMING_CPU in a reuseport group to check if we should iterate all sockets to find a proper one. We increment the counter when * calling listen() if the socket has SO_INCOMING_CPU and SO_REUSEPORT * enabling SO_INCOMING_CPU if the socket is in a reuseport group Also, we decrement it when * detaching a socket out of the group to apply SO_INCOMING_CPU to migrated TCP requests * disabling SO_INCOMING_CPU if the socket is in a reuseport group When the counter reaches 0, we can get back to the O(1) selection algorithm. The overall changes are negligible for the non-SO_INCOMING_CPU case, and the only notable thing is that we have to update sk_incomnig_cpu under reuseport_lock. Otherwise, the race prevents transitioning to the O(n) algorithm and results in the wrong socket selection. cpu1 (setsockopt) cpu2 (listen) +-----------------+ +-------------+ lock_sock(sk1) lock_sock(sk2) reuseport_update_incoming_cpu(sk1, val) . | /* set CPU as 0 */ |- WRITE_ONCE(sk1->incoming_cpu, val) | | spin_lock_bh(&reuseport_lock) | reuseport_grow(sk2, reuse) | . | |- more_socks_size = reuse->max_socks * 2U; | |- if (more_socks_size > U16_MAX && | | reuse->num_closed_socks) | | . | | |- RCU_INIT_POINTER(sk1->sk_reuseport_cb, NULL); | | `- __reuseport_detach_closed_sock(sk1, reuse) | | . | | `- reuseport_put_incoming_cpu(sk1, reuse) | | . | | | /* Read shutdown()ed sk1's sk_incoming_cpu | | | * without lock_sock(). | | | */ | | `- if (sk1->sk_incoming_cpu >= 0) | | . | | | /* decrement not-yet-incremented | | | * count, which is never incremented. | | | */ | | `- __reuseport_put_incoming_cpu(reuse); | | | `- spin_lock_bh(&reuseport_lock) | |- spin_lock_bh(&reuseport_lock) | |- reuse = rcu_dereference_protected(sk1->sk_reuseport_cb, ...) |- if (!reuse) | . | | /* Cannot increment reuse->incoming_cpu. */ | `- goto out; | `- spin_unlock_bh(&reuseport_lock) Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") Reported-by: Kazuho Oku <kazuhooku@gmail.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-25act_skbedit: skbedit queue mapping for receive queueAmritha Nambiar
Add support for skbedit queue mapping action on receive side. This is supported only in hardware, so the skip_sw flag is enforced. This enables offloading filters for receive queue selection in the hardware using the skbedit action. Traffic arrives on the Rx queue requested in the skbedit action parameter. A new tc action flag TCA_ACT_FLAGS_AT_INGRESS is introduced to identify the traffic direction the action queue_mapping is requested on during filter addition. This is used to disallow offloading the skbedit queue mapping action on transmit side. Example: $tc filter add dev $IFACE ingress protocol ip flower dst_ip $DST_IP\ action skbedit queue_mapping $rxq_id skip_sw Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-25linux/container_of.h: Warn about loss of constnessSakari Ailus
container_of() casts the original type to another which leads to the loss of the const qualifier if it is not specified in the caller-provided type. This easily leads to container_of() returning a non-const pointer to a const struct which the C compiler does not warn about. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20221024111627.75183-1-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25container_of: remove container_of_safe()Greg Kroah-Hartman
It came in from a staging driver that has been long removed from the tree, and there are no in-kernel users of the macro, and it's very dubious if anyone should ever use this thing, so just remove it entirely. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221024123933.3331116-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25media: v4l: subdev: Document s_power() callback is deprecatedSakari Ailus
Runtime PM has been around for a decade or more, there's hardly a need to use the V4L2 specific s_power() callback in drivers anymore. Document this in s_power() callback documentation as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-25media: Fix documentation typos in media-entity.hLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-24net: sfp: provide a definition for the power level select bitRussell King (Oracle)
Provide a named definition for the power level select bit in the extended status register, rather than using BIT(0) in the code. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24genetlink: piggy back on resv_op to default to a reject policyJakub Kicinski
To keep backward compatibility we used to leave attribute parsing to the family if no policy is specified. This becomes tedious as we move to more strict validation. Families must define reject all policies if they don't want any attributes accepted. Piggy back on the resv_start_op field as the switchover point. AFAICT only ethtool has added new commands since the resv_start_op was defined, and it has per-op policies so this should be a no-op. Nonetheless the patch should still go into v6.1 for consistency. Link: https://lore.kernel.org/all/20221019125745.3f2e7659@kernel.org/ Link: https://lore.kernel.org/r/20221021193532.1511293-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25Merge tag 'drm-misc-next-2022-10-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: - Documentation for page-flip flags Cross-subsystem Changes: - dma-buf: Add unlocked variant of vmapping and attachment-mapping functions Core Changes: - atomic-helpers: CRTC primary plane test fixes - connector: TV API consistency improvements, cmdline parsing improvements - crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper - edid: Fixes for HFVSDB parsing, - fourcc: Addition of the Vivante tiled modifier - makefile: Sort and reorganize the objects files - mode_config: Remove fb_base from drm_mode_config_funcs - sched: Add a module parameter to change the scheduling policy, refcounting fix for fences - tests: Sort the Kunit tests in the Makefile, improvements to the DP-MST tests - ttm: Remove unnecessary drm_mm_clean() call Driver Changes: - New driver: ofdrm - Move all drivers to a common dma-buf locking convention - bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C - ast: Atomic Gamma LUT Support, Convert to SHMEM, various improvements - lcdif: Support for YUV planes - mgag200: Fix PLL Setup on some revisions - udl: Modesetting improvements, hot-unplug support - vc4: Fix support for PAL-M Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
2022-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/net.h a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag") e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24Merge tag 'net-6.1-rc3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. The net-memcg fix stands out, the rest is very run-off-the-mill. Maybe I'm biased. Current release - regressions: - eth: fman: re-expose location of the MAC address to userspace, apparently some udev scripts depended on the exact value Current release - new code bugs: - bpf: - wait for busy refill_work when destroying bpf memory allocator - allow bpf_user_ringbuf_drain() callbacks to return 1 - fix dispatcher patchable function entry to 5 bytes nop Previous releases - regressions: - net-memcg: avoid stalls when under memory pressure - tcp: fix indefinite deferral of RTO with SACK reneging - tipc: fix a null-ptr-deref in tipc_topsrv_accept - eth: macb: specify PHY PM management done by MAC - tcp: fix a signed-integer-overflow bug in tcp_add_backlog() Previous releases - always broken: - eth: amd-xgbe: SFP fixes and compatibility improvements Misc: - docs: netdev: offer performance feedback to contributors" * tag 'net-6.1-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) net-memcg: avoid stalls when under memory pressure tcp: fix indefinite deferral of RTO with SACK reneging tcp: fix a signed-integer-overflow bug in tcp_add_backlog() net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed docs: netdev: offer performance feedback to contributors kcm: annotate data-races around kcm->rx_wait kcm: annotate data-races around kcm->rx_psock net: fman: Use physical address for userspace interfaces net/mlx5e: Cleanup MACsec uninitialization routine atlantic: fix deadlock at aq_nic_stop nfp: only clean `sp_indiff` when application firmware is unloaded amd-xgbe: add the bit rate quirk for Molex cables amd-xgbe: fix the SFP compliance codes check for DAC cables amd-xgbe: enable PLL_CTL for fixed PHY modes only amd-xgbe: use enums for mailbox cmd and sub_cmds amd-xgbe: Yellow carp devices do not need rrc bpf: Use __llist_del_all() whenever possbile during memory draining bpf: Wait for busy refill_work when destroying bpf memory allocator MAINTAINERS: add keyword match on PTP ...
2022-10-24zstd: import usptream v1.5.2Nick Terrell
Updates the kernel's zstd library to v1.5.2, the latest zstd release. The upstream tag it is updated to is `v1.5.2-kernel`, which contains several cherry-picked commits on top of the v1.5.2 release which are required for the kernel update. I will create this tag once the PR is ready to merge, until then reference the temporary upstream branch `v1.5.2-kernel-cherrypicks`. I plan to submit this patch as part of the v6.2 merge window. I've done basic build testing & testing on x86-64, i386, and aarch64. I'm merging these patches into my `zstd-next` branch, which is pulled into `linux-next` for further testing. I've benchmarked BtrFS with zstd compression on a x86-64 machine, and saw these results. Decompression speed is a small win across the board. The lower compression levels 1-4 see both compression speed and compression ratio wins. The higher compression levels see a small compression speed loss and about neutral ratio. I expect the lower compression levels to be used much more heavily than the high compression levels, so this should be a net win. Level CTime DTime Ratio 1 -2.95% -1.1% -0.7% 3 -3.5% -1.2% -0.5% 5 +3.7% -1.0% +0.0% 7 +3.2% -0.9% +0.0% 9 -4.3% -0.8% +0.1% Signed-off-by: Nick Terrell <terrelln@fb.com>
2022-10-24Merge branch 'main' into zstd-nextNick Terrell
2022-10-24drm/amd: Add IMU fw version to fw version queriesDavid Francis
IMU is a new firmware for GFX11. There are four means by which firmware version can be queried from the driver: device attributes, vf2pf, debugfs, and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl. Add IMU as an option for those four methods. V2: Added debugfs Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd: Add IMU fw version to fw version queriesDavid Francis
IMU is a new firmware for GFX11. There are four means by which firmware version can be queried from the driver: device attributes, vf2pf, debugfs, and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl. Add IMU as an option for those four methods. V2: Added debugfs Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24net-memcg: avoid stalls when under memory pressureJakub Kicinski
As Shakeel explains the commit under Fixes had the unintended side-effect of no longer pre-loading the cached memory allowance. Even tho we previously dropped the first packet received when over memory limit - the consecutive ones would get thru by using the cache. The charging was happening in batches of 128kB, so we'd let in 128kB (truesize) worth of packets per one drop. After the change we no longer force charge, there will be no cache filling side effects. This causes significant drops and connection stalls for workloads which use a lot of page cache, since we can't reclaim page cache under GFP_NOWAIT. Some of the latency can be recovered by improving SACK reneg handling but nowhere near enough to get back to the pre-5.15 performance (the application I'm experimenting with still sees 5-10x worst latency). Apply the suggested workaround of using GFP_ATOMIC. We will now be more permissive than previously as we'll drop _no_ packets in softirq when under pressure. But I can't think of any good and simple way to address that within networking. Link: https://lore.kernel.org/all/20221012163300.795e7b86@kernel.org/ Suggested-by: Shakeel Butt <shakeelb@google.com> Fixes: 4b1327be9fe5 ("net-memcg: pass in gfp_t mask to mem_cgroup_charge_skmem()") Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Link: https://lore.kernel.org/r/20221021160304.1362511-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Alexei Starovoitov says: ==================== pull-request: bpf 2022-10-23 We've added 7 non-merge commits during the last 18 day(s) which contain a total of 8 files changed, 69 insertions(+), 5 deletions(-). The main changes are: 1) Wait for busy refill_work when destroying bpf memory allocator, from Hou. 2) Allow bpf_user_ringbuf_drain() callbacks to return 1, from David. 3) Fix dispatcher patchable function entry to 5 bytes nop, from Jiri. 4) Prevent decl_tag from being referenced in func_proto, from Stanislav. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Use __llist_del_all() whenever possbile during memory draining bpf: Wait for busy refill_work when destroying bpf memory allocator bpf: Fix dispatcher patchable function entry to 5 bytes nop bpf: prevent decl_tag from being referenced in func_proto selftests/bpf: Add reproducer for decl_tag in func_proto return type selftests/bpf: Make bpf_user_ringbuf_drain() selftest callback return 1 bpf: Allow bpf_user_ringbuf_drain() callbacks to return 1 ==================== Link: https://lore.kernel.org/r/20221023192244.81137-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-24videodev2.h: add p_s32 and p_s64 pointersHans Verkuil
Added p_s32 and p_s64 pointers to the union in struct v4l2_ext_control to simplify INTEGER and INTEGER64 control array support. Internally the control framework handles such arrays just fine, but userspace is missing corresponding pointers to access array elements of these types. The internal union v4l2_ctrl_ptr which the control framework uses already has these types, they just were never added to the public API. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24Merge branch 'fs.acl.rework' into for-nextChristian Brauner
2022-10-24pinctrl: Clean up headersAndy Shevchenko
There is a few things done: - include only the headers we are direct user of - when pointer is in use, provide a forward declaration - add missing headers - group generic headers and subsystem headers - sort each group alphabetically While at it, fix some awkward indentations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-10-24firmware: tegra: bpmp: Use iosys-map helpersThierry Reding
The shared memory used for inter-processor communication between the CPU and the BPMP can reside either in system memory or in I/O memory. Use the iosys-map helpers to abstract these differences away. Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-10-24dt-bindings: Add headers for NVDEC on Tegra234Mikko Perttunen
Add clock, memory controller, powergate and reset dt-binding headers necessary for NVDEC. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-10-24spi: pxa2xx: Validate the correctness of the SSP typeAndy Shevchenko
Currently we blindly apply the SSP type value from any source of the information. Increase robustness by validating the value before use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221021190018.63646-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-24net: skb: move skb_pp_recycle() to skbuff.cYunsheng Lin
skb_pp_recycle() is only used by skb_free_head() in skbuff.c, so move it to skbuff.c. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: remove useless parameter of __sock_cmsg_sendxu xin
The parameter 'msg' has never been used by __sock_cmsg_send, so we can remove it safely. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Reviewed-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: add a refcount tracker for kernel socketsEric Dumazet
Commit ffa84b5ffb37 ("net: add netns refcount tracker to struct sock") added a tracker to sockets, but did not track kernel sockets. We still have syzbot reports hinting about netns being destroyed while some kernel TCP sockets had not been dismantled. This patch tracks kernel sockets, and adds a ref_tracker_dir_print() call to net_free() right before the netns is freed. Normally, each layer is responsible for properly releasing its kernel sockets before last call to net_free(). This debugging facility is enabled with CONFIG_NET_NS_REFCNT_TRACKER=y Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Tested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24udp: track the forward memory release threshold in an hot cachelinePaolo Abeni
When the receiver process and the BH runs on different cores, udp_rmem_release() experience a cache miss while accessing sk_rcvbuf, as the latter shares the same cacheline with sk_forward_alloc, written by the BH. With this patch, UDP tracks the rcvbuf value and its update via custom SOL_SOCKET socket options, and copies the forward memory threshold value used by udp_rmem_release() in a different cacheline, already accessed by the above function and uncontended. Since the UDP socket init operation grown a bit, factor out the common code between v4 and v6 in a shared helper. Overall the above give a 10% peek throughput increase under UDP flood. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24net: introduce and use custom sockopt socket flagPaolo Abeni
We will soon introduce custom setsockopt for UDP sockets, too. Instead of doing even more complex arbitrary checks inside sock_use_custom_sol_socket(), add a new socket flag and set it for the relevant socket types (currently only MPTCP). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24ethtool: Add support for 800Gbps link modesAmit Cohen
Add support for 800Gbps speed, link modes of 100Gbps per lane. As mentioned in slide 21 in IEEE documentation [1], all adopted 802.3df copper and optical PMDs baselines using 100G/lane will be supported. Add the relevant PMDs which are mentioned in slide 5 in IEEE documentation [1] and were approved on 10-2022 [2]: BP - KR8 Cu Cable - CR8 MMF 50m - VR8 MMF 100m - SR8 SMF 500m - DR8 SMF 2km - DR8-2 [1]: https://www.ieee802.org/3/df/public/22_10/22_1004/shrikhande_3df_01a_221004.pdf [2]: https://ieee802.org/3/df/KeyMotions_3df_221005.pdf Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24gpiolib: Clean up headersAndy Shevchenko
There is a few things done: - include only the headers we are direct user of - when pointer is in use, provide a forward declaration - add missing headers - group generic headers and subsystem headers - sort each group alphabetically While at it, fix some awkward indentations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-10-24gpio: reg: Add missing header(s)Andy Shevchenko
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-10-24inet6: Remove inet6_destroy_sock().Kuniyuki Iwashima
The last user of inet6_destroy_sock() is its wrapper inet6_cleanup_sock(). Let's rename inet6_destroy_sock() to inet6_cleanup_sock(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-24x86/resctrl: Remove arch_has_empty_bitmapsBabu Moger
The field arch_has_empty_bitmaps is not required anymore. The field min_cbm_bits is enough to validate the CBM (capacity bit mask) if the architecture can support the zero CBM or not. Suggested-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/166430979654.372014.615622285687642644.stgit@bmoger-ubuntu
2022-10-24efi: random: reduce seed size to 32 bytesArd Biesheuvel
We no longer need at least 64 bytes of random seed to permit the early crng init to complete. The RNG is now based on Blake2s, so reduce the EFI seed size to the Blake2s hash size, which is sufficient for our purposes. While at it, drop the READ_ONCE(), which was supposed to prevent size from being evaluated after seed was unmapped. However, this cannot actually happen, so READ_ONCE() is unnecessary here. Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-10-23elf_core_copy_task_regs(): task_pt_regs is defined everywhereAl Viro
Had been since 2011 for all live architectures, ever since 2013 for all architectures, period. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-10-23kill coredump_params->regsAl Viro
it's always task_pt_regs(current) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-10-23kill signal_pt_regs()Al Viro
Once upon at it was used on hot paths, but that had not been true since 2013. IOW, there's no point for arch-optimized equivalent of task_pt_regs(current) - remaining two users are not worth bothering with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "RISC-V: - Fix compilation without RISCV_ISA_ZICBOM - Fix kvm_riscv_vcpu_timer_pending() for Sstc ARM: - Fix a bug preventing restoring an ITS containing mappings for very large and very sparse device topology - Work around a relocation handling error when compiling the nVHE object with profile optimisation - Fix for stage-2 invalidation holding the VM MMU lock for too long by limiting the walk to the largest block mapping size - Enable stack protection and branch profiling for VHE - Two selftest fixes x86: - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl selftests: - synchronize includes between include/uapi and tools/include/uapi" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools: include: sync include/api/linux/kvm.h KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter() kvm: Add support for arch compat vm ioctls RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc RISC-V: Fix compilation without RISCV_ISA_ZICBOM KVM: arm64: vgic: Fix exit condition in scan_its_table() KVM: arm64: nvhe: Fix build with profile optimization KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test KVM: arm64: selftests: Fix multiple versions of GIC creation KVM: arm64: Enable stack protection and branch profiling for VHE KVM: arm64: Limit stage2_apply_range() batch size to largest block KVM: arm64: Work out supported block level at compile time
2022-10-23kernel/utsname_sysctl.c: Fix hostname pollingLinus Torvalds
Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-23Merge tag 'perf_urgent_for_v6.1_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Fix raw data handling when perf events are used in bpf - Rework how SIGTRAPs get delivered to events to address a bunch of problems with it. Add a selftest for that too * tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bpf: Fix sample_flags for bpf_perf_event_output selftests/perf_events: Add a SIGTRAP stress test with disables perf: Fix missing SIGTRAPs
generated by cgit v1.3 (git 2.53.0) at 2026-11-14 10:52:20 +0000