| Age | Commit message (Collapse) | Author |
|---|
|
This clarifies ip_mc_sf_allow() intent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can change inet_sk() to propagate const qualifier of its argument.
This should avoid some potential errors caused by accidental
(const -> not_const) promotion.
Other helpers like tcp_sk(), udp_sk(), raw_sk() will be handled
in separate patch series.
v2: use container_of_const() as advised by Jakub and Linus
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20230315142841.3a2ac99a@kernel.org/
Link: https://lore.kernel.org/netdev/CAHk-=wiOf12nrYEF2vJMcucKjWPN-Ns_SW9fA7LwST_2Dzp7rw@mail.gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an internal flag to indicate whether MDB entries are configured or
not. Set the flag after installing the first MDB entry and clear it
before deleting the last one.
The flag will be consulted by the data path which will only perform an
MDB lookup if the flag is set, thereby keeping the MDB overhead to a
minimum when the MDB is not used.
Another option would have been to use a static key, but it is global and
not per-device, unlike the current approach.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement MDB control path support, enabling the creation, deletion,
replacement and dumping of MDB entries in a similar fashion to the
bridge driver. Unlike the bridge driver, each entry stores a list of
remote VTEPs to which matched packets need to be replicated to and not a
list of bridge ports.
The motivating use case is the installation of MDB entries by a user
space control plane in response to received EVPN routes. As such, only
allow permanent MDB entries to be installed and do not implement
snooping functionality, avoiding a lot of unnecessary complexity.
Since entries can only be modified by user space under RTNL, use RTNL as
the write lock. Use RCU to ensure that MDB entries and remotes are not
freed while being accessed from the data path during transmission.
In terms of uAPI, reuse the existing MDB netlink interface, but add a
few new attributes to request and response messages:
* IP address of the destination VXLAN tunnel endpoint where the
multicast receivers reside.
* UDP destination port number to use to connect to the remote VXLAN
tunnel endpoint.
* VXLAN VNI Network Identifier to use to connect to the remote VXLAN
tunnel endpoint. Required when Ingress Replication (IR) is used and
the remote VTEP is not a member of originating broadcast domain
(VLAN/VNI) [1].
* Source VNI Network Identifier the MDB entry belongs to. Used only when
the VXLAN device is in external mode.
* Interface index of the outgoing interface to reach the remote VXLAN
tunnel endpoint. This is required when the underlay destination IP is
multicast (P2MP), as the multicast routing tables are not consulted.
All the new attributes are added under the 'MDBA_SET_ENTRY_ATTRS' nest
which is strictly validated by the bridge driver, thereby automatically
rejecting the new attributes.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-3.2.2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add MDB net device operations that will be invoked by rtnetlink code in
response to received RTM_{NEW,DEL,GET}MDB messages. Subsequent patches
will implement these operations in the bridge and VXLAN drivers.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extended performance counter stats in 'ethtool -S <interface>' output
for MANA VF to facilitate troubleshooting.
Tested-on: Ubuntu22
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I relicensed Netlink spec code to GPL-2.0 OR BSD-3-Clause but
we still put a slightly different license on the uAPI header
than the rest of the code. Use the Linux-syscall-note on all
the specs and all generated code. It's moot for kernel code,
but should not hurt. This way the licenses match everywhere.
Cc: Chuck Lever <chuck.lever@oracle.com>
Fixes: 37d9df224d1e ("ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some platforms support using a doorbell to communicate. Export
this feature for other drivers to utilize as well.
Link: https://lore.kernel.org/linux-i2c/20220916131854.687371-3-jsd@semihalf.com/
Suggested-by: Jan Dabros <jsd@semihalf.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Some platforms with a PSP support an interface for features that
interact directly with the PSP instead of through a SEV or TEE
environment.
Initialize this interface so that other drivers can consume it.
These drivers may either be subdrivers for the ccp module or
external modules. For external modules, export a symbol for them
to utilize.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Some of the bits and fields used for mailboxes communicating with the
PSP are common across all mailbox implementations (SEV, TEE, etc).
Move these bits into the common `linux/psp.h` so they don't need to
be re-defined for each implementation.
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The TEE subdriver for CCP, the amdtee driver and the i2c-designware-amdpsp
drivers all include `psp-sev.h` even though they don't use SEV
functionality.
Move the definition of `__psp_pa` into a common header to be included
by all of these drivers.
Reviewed-by: Jan Dabros <jsd@semihalf.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> # For the drivers/i2c/busses/i2c-designware-amdpsp.c
Acked-by: Sumit Garg <sumit.garg@linaro.org> # For TEE subsystem bits
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Sean Christopherson <seanjc@google.com> # KVM
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add MCQ hardware queue ID in the existing trace event ufshcd_command().
Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Link: https://lore.kernel.org/r/1678866271-49601-1-git-send-email-quic_ziqichen@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
IOMMU and SVA-capable devices know nothing about LAM and only expect
canonical addresses. An attempt to pass down tagged pointer will lead
to address translation failure.
By default do not allow to enable both LAM and use SVA in the same
process.
The new ARCH_FORCE_TAGGED_SVA arch_prctl() overrides the limitation.
By using the arch_prctl() userspace takes responsibility to never pass
tagged address to the device.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230312112612.31869-12-kirill.shutemov%40linux.intel.com
|
|
Kernel has few users of pasid_valid() and all but one checks if the
process has PASID allocated. The helper takes ioasid_t as the input.
Replace the helper with mm_valid_pasid() that takes mm_struct as the
argument. The only call that checks PASID that is not tied to mm_struct
is open-codded now.
This is preparatory patch. It helps avoid ifdeffery: no need to
dereference mm->pasid in generic code to check if the process has PASID.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20230312112612.31869-11-kirill.shutemov%40linux.intel.com
|
|
Add a line in /proc/$PID/status to report untag_mask. It can be
used to find out LAM status of the process from the outside. It is
useful for debuggers.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/all/20230312112612.31869-10-kirill.shutemov%40linux.intel.com
|
|
untagged_addr() removes tags/metadata from the address and brings it to
the canonical form. The helper is implemented on arm64 and sparc. Both of
them do untagging based on global rules.
However, Linear Address Masking (LAM) on x86 introduces per-process
settings for untagging. As a result, untagged_addr() is now only
suitable for untagging addresses for the current proccess.
The new helper untagged_addr_remote() has to be used when the address
targets remote process. It requires the mmap lock for target mm to be
taken.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/all/20230312112612.31869-6-kirill.shutemov%40linux.intel.com
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Address a rather annoying bug w.r.t. guest timer offsetting. The
synchronization of timer offsets between vCPUs was broken, leading
to inconsistent timer reads within the VM.
x86:
- New tests for the slow path of the EVTCHNOP_send Xen hypercall
- Add missing nVMX consistency checks for CR0 and CR4
- Fix bug that broke AMD GATag on 512 vCPU machines
Selftests:
- Skip hugetlb tests if huge pages are not available
- Sync KVM exit reasons"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Sync KVM exit reasons in selftests
KVM: selftests: Add macro to generate KVM exit reason strings
KVM: selftests: Print expected and actual exit reason in KVM exit reason assert
KVM: selftests: Make vCPU exit reason test assertion common
KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_test
KVM: selftests: Use enum for test numbers in xen_shinfo_test
KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercalls
KVM: selftests: Move the guts of kvm_hypercall() to a separate macro
KVM: SVM: WARN if GATag generation drops VM or vCPU ID information
KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUs
KVM: SVM: Fix a benign off-by-one bug in AVIC physical table mask
selftests: KVM: skip hugetlb tests if huge pages are not available
KVM: VMX: Use tabs instead of spaces for indentation
KVM: VMX: Fix indentation coding style issue
KVM: nVMX: remove unnecessary #ifdef
KVM: nVMX: add missing consistency checks for CR0 and CR4
KVM: arm64: timers: Convert per-vcpu virtual offset to a global value
|
|
There are no users of nfcmrvl platform_data struct outside of the
driver and none will be added, so move it into the driver.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option. So there is nothing the caller can do
with errors except log them. (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)
Just make blk_crypto_evict_key() return void and log errors itself.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The referenced function led_classdev_brightness_set() never existed.
Fixes: 5ada28bf7675 ("led-class: always implement blinking")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230218-typo-led-set-v1-1-3c35362a2f2d@weissschuh.net
|
|
All kvm_arch_vm_ioctl() implementations now only deal with "int"
types as return values, so we can change the return type of these
functions to use "int" instead of "long".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20230208140105.655814-7-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The KVM_GET_NR_MMU_PAGES ioctl is quite questionable on 64-bit hosts
since it fails to return the full 64 bits of the value that can be
set with the corresponding KVM_SET_NR_MMU_PAGES call. Its "long" return
value is truncated into an "int" in the kvm_arch_vm_ioctl() function.
Since this ioctl also never has been used by userspace applications
(QEMU, Google's internal VMM, kvmtool and CrosVM have been checked),
it's likely the best if we remove this badly designed ioctl before
anybody really tries to use it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230208140105.655814-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The support of Intel Speed Select Technology - Turbo Frequency (SST-TF)
feature enables the ability to set different “All core turbo ratio
limits” to cores based on the priority. By using this feature, some cores
can be configured to get higher turbo frequency by designating them as
high priority at the cost of lower or no turbo frequency on the low
priority cores.
One new IOCTLs are added:
ISST_IF_GET_TURBO_FREQ_INFO : Get information about turbo frequency
buckets
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST-TF operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-8-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This Intel Speed Select Technology - Performance Profile (SST-PP) feature
introduces a mechanism that allows multiple optimized performance profiles
per system. Each profile defines a set of CPUs that need to be online and
rest offline to sustain a guaranteed base frequency.
Five new IOCTLs are added:
ISST_IF_PERF_LEVELS : Get number of performance levels
ISST_IF_PERF_SET_LEVEL : Set to a new performance level
ISST_IF_PERF_SET_FEATURE : Activate SST-BF/SST-TF for a performance level
ISST_IF_GET_PERF_LEVEL_INFO : Get parameters for a performance level
ISST_IF_GET_PERF_LEVEL_CPU_MASK : Get CPU mask for a performance level
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST PP operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-6-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Intel Speed Select Technology Core Power (SST-CP) is an interface that
allows users to define per core priority. This defines a mechanism to
distribute power among cores when there is a power constrained
scenario. This defines a class of service (CLOS) configuration.
Three new IOCTLs are added:
ISST_IF_CORE_POWER_STATE : Enable/Disable SST-CP
ISST_IF_CLOS_PARAM : Configure CLOS parameters
ISST_IF_CLOS_ASSOC : Associate CPUs to a CLOS
To associate CPUs to CLOS, either Linux CPU numbering or PUNIT numbering
scheme can be used, using parameter punit_cpu_map (1: for PUNIT numbering
0 for Linux CPU number).
There is no change to IOCTL to get PUNIT CPU number for a CPU.
Introduce get_instance() function, which is used by majority of IOCTLs
processing to convert a socket and power domain to
tpmi_per_power_domain_info * instance. This instance has all the MMIO
offsets stored to read a particular field.
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST CP operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Enumerate TPMI SST driver and create basic framework to add more
features.
The basic user space interface is still same as the legacy using
/dev/isst_interface. Users of "intel-speed-select" utility should
be able to use same commands as prior gens without being aware
of new underlying hardware interface.
TPMI SST driver enumerates on device "intel_vsec.tpmi-sst". Since there
can be multiple instances and there is one common SST core, split
implementation into two parts: A common core part and an enumeration
part. The enumeration driver is loaded for each device instance and
register with the TPMI SST core driver.
On very first enumeration the TPMI SST core driver register with SST
core driver to get IOCTL callbacks. The api_version is incremented
for IOCTL ISST_IF_GET_PLATFORM_INFO, so that user space can issue
new IOCTLs.
Each TPMI package contains multiple power domains. Each power domain
has its own set of SST controls. For each domain map the MMIO memory
and update per domain struct tpmi_per_power_domain_info. This information
will be used to implement other SST interfaces.
Implement first IOCTL commands to get number of TPMI SST instances
and instance mask as some of the power domains may not have any
SST controls.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This isn't ever used by VFS now, and it couldn't even work. Any FS that
uses the SECURITY_LSM_NATIVE_LABELS flag needs to also process the
value returned back from the LSM, so it needs to do its
security_sb_set_mnt_opts() call on its own anyway.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Add spi_split_transfers_maxwords() function that splits
spi_transfers transparently into multiple transfers
that are below a given number of SPI words.
This function reuses most of its code from
spi_split_transfers_maxsize() and for transfers with
eight or less bits per word actually behaves the same.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Link: https://lore.kernel.org/r/20230310092053.1006459-1-l.goehrs@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.3
- avoid potential UAF in nvmet_req_complete (Damien Le Moal)
- more quirks (Elmer Miroslav Mosher Golovin, Philipp Geulen)
- fix a memory leak in the nvme-pci probe teardown path (Irvin Cote)
- repair the MAINTAINERS entry (Lukas Bulwahn)
- fix handling single range discard request (Ming Lei)
- show more opcode names in trace events (Minwoo Im)
- fix nvme-tcp timeout reporting (Sagi Grimberg)"
* tag 'nvme-6.3-2022-03-16' of git://git.infradead.org/nvme:
nvmet: avoid potential UAF in nvmet_req_complete()
nvme-trace: show more opcode names
nvme-tcp: add nvme-tcp pdu size build protection
nvme-tcp: fix opcode reporting in the timeout handler
nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM620
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV3000
nvme-pci: fixing memory leak in probe teardown path
nvme: fix handling single range discard request
MAINTAINERS: repair malformed T: entries in NVM EXPRESS DRIVERS
|
|
On some MacBooks both the apple_bl and the apple-gmux backlight drivers
may be able to export a /sys/class/backlight device.
To avoid having 2 backlight devices for one LCD panel until now
the apple-gmux driver has been calling apple_bl_unregister() to move
the apple_bl backlight device out of the way when it loads.
Similar problems exist on other x86 laptops and all backlight drivers
which may be used on x86 laptops have moved to using
acpi_video_get_backlight_type() to determine whether they should load
or not.
Switch apple_bl to this model too, so that it is consistent with all
the other x86 backlight drivers.
Besides code-simplification and consistency this has 2 other benefits:
1) It removes a race during boot where userspace will briefly see
an apple_bl backlight and then have it disappear again, leading to e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
2) This allows user to switch between the drivers by passing
acpi_backlight=apple_gmux or acpi_backlight=vendor on the kernel
commandline.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230307120540.389920-1-hdegoede@redhat.com
|
|
Commit fc83fbc80e1a ("platform/x86: apple-gmux: refactor gmux types")
neglected to update the documentation of apple_gmux_detect's arguments.
Update the documentation to reflect that commit's changes.
include/linux/apple-gmux.h:99: warning:
Function parameter or member 'type_ret' not described in 'apple_gmux_detect'
include/linux/apple-gmux.h:99: warning:
Excess function parameter 'indexed_ret' description in 'apple_gmux_detect'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/lkml/20230309122822.77435e33@canb.auug.org.au/
Fixes: fc83fbc80e1a ("platform/x86: apple-gmux: refactor gmux types")
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230309104353.10905-1-orlandoch.dev@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add support for USB3803 and bypass mode, with this change
is also possible to move the component out of bypass mode.
In bypass mode the downstream port 3 is connected to the
upstream port with low switch resistance R_on.
Controlling mode of operations:
| RESET_N | BYPASS_N | Mode |
--------------------------------
| 0 | 0 | standby |
| 1 | 0 | bypass |
| 1 | 1 | hub |
Datasheet: https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/00001691D.pdf
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230313165039.255579-4-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some newer dual gpu MacBooks, the T2 Coprocessor functions as the
gmux, and the Intel side can interract with this new gmux type through
MMIO. Add support for these gmux controllers to the apple-gmux driver.
We start using the GMSP(0) acpi method on these gmux's when clearing
interrupts, as this prevents a flood of status=0 interrupts that can't
be cleared. It's unknown if this helps or hinders older gmux types, so
it isn't enabled for those.
Interestingly, the ACPI table only allocates 8 bytes for GMUX, but we
actually need 16, and as such we request 16 with request_mem_region.
Reading and writing from ports:
16 bytes from 0xfe0b0200 are used. 0x0 to 0x4 are where data
to read appears, and where data to write goes. Writing to 0xe
sets the gmux port being accessed, and writing to 0xf sends commands.
These commands are 0x40 & data_length for write, and data_length for
read, where data_length is 1, 2 or 4. Once byte base+0xf is 0, the
command is done.
Issues:
As with other retina models, we can't switch DDC lines so
switching at runtime doesn't work if the inactive gpu driver
already disabled eDP due to it not being connected when that
driver loaded.
Additionally, turning on the dgpu back on on the MacBookPro16,1 does
not work.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230303112842.3094-4-orlandoch.dev@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add apple_gmux_config struct containing operations and data specific to
each mux type.
This is in preparation for adding a third, MMIO based, gmux type.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Link: https://lore.kernel.org/r/20230303112842.3094-3-orlandoch.dev@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Downstream patches require devlink params to access the PTYS register,
move the needed functions from mlx5e to the core layer.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement thermal zone support for mlx5 based HW. The NIC
uses temperature sensor provided by ASIC to report current temperature
to thermal core.
Signed-off-by: Sandipan Patra <spatra@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This resolves two problems with attachment of fentry/fexit/fmod_ret/lsm
to functions located in modules:
1. The verifier tries to find the address to attach to in kallsyms. This
is always done by searching the entire kallsyms, not respecting the
module in which the function is located. Such approach causes an
incorrect attachment address to be computed if the function to attach
to is shadowed by a function of the same name located earlier in
kallsyms.
2. If the address to attach to is located in a module, the module
reference is only acquired in register_fentry. If the module is
unloaded between the place where the address is found
(bpf_check_attach_target in the verifier) and register_fentry, it is
possible that another module is loaded to the same address which may
lead to potential errors.
Since the attachment must contain the BTF of the program to attach to,
we extract the module from it and search for the function address in the
correct module (resolving problem no. 1). Then, the module reference is
taken directly in bpf_check_attach_target and stored in the bpf program
(in bpf_prog_aux). The reference is only released when the program is
unloaded (resolving problem no. 2).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/3f6a9d8ae850532b5ef864ef16327b0f7a669063.1678432753.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge MSM8917 Global Clock Controller and RPM clock controller bindings
through topic branch, to make it possible to introduce in Devicetree
source depending on these.
|
|
Add a device tree binding to describe clocks, resets and power domains
provided by the global clock controller on MSM8917 SoCs and the very
similar QM215 SoCs.
Add the new compatibles to qcom,gcc-msm8909.yaml. There is
no need to create another YAML file because the bindings are identical
(MSM8917 GCC requires the same parent clocks as the MSM8909 GCC).
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230223180935.60546-2-otto.pflueger@abscue.de
|
|
The maximum VMID for assign_mem is 63. Use a u64 to represent this
bitmap instead of architecture-dependent "unsigned int" which varies in
size on 32-bit and 64-bit platforms.
Acked-by: Kalle Valo <kvalo@kernel.org> (ath10k)
Tested-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213181832.3489174-1-quic_eberman@quicinc.com
|
|
Merge the IPQ5332 Global Clock Controller binding through a topic branch
to make it possible to include in Devicetree source as well.
|
|
Add binding for the Qualcomm IPQ5332 Global Clock Controller.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-4-quic_kathirav@quicinc.com
|
|
Add the ID for the Qualcomm SM7150 SoC.
Signed-off-by: David Wronek <davidwronek@gmail.com>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230305191745.386862-2-danila@jiaxyga.com
|
|
Add the ID for QRB4210 variant.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315160151.2166861-2-bhupesh.sharma@linaro.org
|
|
Add SOC ID for Qualcomm IPQ9574, IPQ9570, IPQ9554, IPQ9550,
IPQ9514 and IPQ9510
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1678774414-14414-2-git-send-email-quic_varada@quicinc.com
|
|
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for
accessing the (Control and Status Registers) CSRs of each LLCC bank.
This stride only works for some SoCs like SDM845 for which driver
support was initially added.
But the later SoCs use different register stride that vary between the
banks with holes in-between. So it is not possible to use a single register
stride for accessing the CSRs of each bank. By doing so could result in a
crash.
For fixing this issue, let's obtain the base address of each LLCC bank from
devicetree and get rid of the fixed stride. This also means, there is no
need to rely on reg-names property and the base addresses can be obtained
using the index.
First index is LLCC bank 0 and last index is LLCC broadcast. If the SoC
supports more than one bank, then those need to be defined in devicetree
for index from 1..N-1.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-13-manivannan.sadhasivam@linaro.org
|
|
Add the missing IDs for scuba and its QRB variant.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314-topic-scuba_socinfo-v2-1-44fa1256aa6d@linaro.org
|
|
While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.
Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.
Fixes: 394ffa503bc4 ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have more commands to show in the trace. Sync up.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
