| Age | Commit message (Collapse) | Author |
|---|
|
Since pci_acpi_add_bus_pm_notifier() is only suitable for adding ACPI
PM notifiers to root buses, rename it to pci_acpi_add_root_pm_notifier()
and modify it to take an additional "root" argument, which is then used
for passing a PCI root bridge device pointer to acpi_add_pm_notifier().
That function uses it to populate the "dev" field in the context
structure attached to the ACPI device object that will receive the
ACPI "wake" notifications on behalf of the given PCI root bus. The
context structure in question is passed to pci_acpi_wake_bus(), so
the latter can be simplified quite a bit now because the target PCI
host bridge structure address can be derived from "dev".
No intentional functional impact.
This change will also facilitate a subsequent update related to the
registration of wakeup sources.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Kerneldoc comment fixup ]
Link: https://patch.msgid.link/2395263.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This simplifies the code. unwind_user_next_fp() does not need to
return -EINVAL if config option HAVE_UNWIND_USER_FP is disabled, as
unwind_user_start() will then not select this unwind method and
unwind_user_next() will therefore not call it.
Provide (1) a dummy definition of ARCH_INIT_USER_FP_FRAME, if the unwind
user method HAVE_UNWIND_USER_FP is not enabled, (2) a common fallback
definition of unwind_user_at_function_start() which returns false, and
(3) a common dummy definition of ARCH_INIT_USER_FP_ENTRY_FRAME.
Note that enabling the config option HAVE_UNWIND_USER_FP without
defining ARCH_INIT_USER_FP_FRAME triggers a compile error, which is
helpful when implementing support for this unwind user method in an
architecture. Enabling the config option when providing an arch-
specific unwind_user_at_function_start() definition makes it necessary
to also provide an arch-specific ARCH_INIT_USER_FP_ENTRY_FRAME
definition.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251208160352.1363040-3-jremus@linux.ibm.com
|
|
Wire up system vector 0xf5 for handling PMIs (i.e. interrupts delivered
through the LVTPC) while running KVM guests with a mediated PMU. Perf
currently delivers all PMIs as NMIs, e.g. so that events that trigger while
IRQs are disabled aren't delayed and generate useless records, but due to
the multiplexing of NMIs throughout the system, correctly identifying NMIs
for a mediated PMU is practically infeasible.
To (greatly) simplify identifying guest mediated PMU PMIs, perf will
switch the CPU's LVTPC between PERF_GUEST_MEDIATED_PMI_VECTOR and NMI when
guest PMU context is loaded/put. I.e. PMIs that are generated by the CPU
while the guest is active will be identified purely based on the IRQ
vector.
Route the vector through perf, e.g. as opposed to letting KVM attach a
handler directly a la posted interrupt notification vectors, as perf owns
the LVTPC and thus is the rightful owner of PERF_GUEST_MEDIATED_PMI_VECTOR.
Functionally, having KVM directly own the vector would be fine (both KVM
and perf will be completely aware of when a mediated PMU is active), but
would lead to an undesirable split in ownership: perf would be responsible
for installing the vector, but not handling the resulting IRQs.
Add a new perf_guest_info_callbacks hook (and static call) to allow KVM to
register its handler with perf when running guests with mediated PMUs.
Note, because KVM always runs guests with host IRQs enabled, there is no
danger of a PMI being delayed from the guest's perspective due to using a
regular IRQ instead of an NMI.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-9-seanjc@google.com
|
|
Add exported APIs to load/put a guest mediated PMU context. KVM will
load the guest PMU shortly before VM-Enter, and put the guest PMU shortly
after VM-Exit.
On the perf side of things, schedule out all exclude_guest events when the
guest context is loaded, and schedule them back in when the guest context
is put. I.e. yield the hardware PMU resources to the guest, by way of KVM.
Note, perf is only responsible for managing host context. KVM is
responsible for loading/storing guest state to/from hardware.
[sean: shuffle patches around, write changelog]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-8-seanjc@google.com
|
|
Current perf doesn't explicitly schedule out all exclude_guest events
while the guest is running. There is no problem with the current
emulated vPMU. Because perf owns all the PMU counters. It can mask the
counter which is assigned to an exclude_guest event when a guest is
running (Intel way), or set the corresponding HOSTONLY bit in evsentsel
(AMD way). The counter doesn't count when a guest is running.
However, either way doesn't work with the introduced mediated vPMU.
A guest owns all the PMU counters when it's running. The host should not
mask any counters. The counter may be used by the guest. The evsentsel
may be overwritten.
Perf should explicitly schedule out all exclude_guest events to release
the PMU resources when entering a guest, and resume the counting when
exiting the guest.
It's possible that an exclude_guest event is created when a guest is
running. The new event should not be scheduled in as well.
The ctx time is shared among different PMUs. The time cannot be stopped
when a guest is running. It is required to calculate the time for events
from other PMUs, e.g., uncore events. Add timeguest to track the guest
run time. For an exclude_guest event, the elapsed time equals
the ctx time - guest time.
Cgroup has dedicated times. Use the same method to deduct the guest time
from the cgroup time as well.
[sean: massage comments]
Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-7-seanjc@google.com
|
|
The current perf tracks two timestamps for the normal ctx and cgroup.
The same type of variables and similar codes are used to track the
timestamps. In the following patch, the third timestamp to track the
guest time will be introduced.
To avoid the code duplication, add a new struct perf_time_ctx and factor
out a generic function update_perf_time_ctx().
No functional change.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-6-seanjc@google.com
|
|
Currently, exposing PMU capabilities to a KVM guest is done by emulating
guest PMCs via host perf events, i.e. by having KVM be "just" another user
of perf. As a result, the guest and host are effectively competing for
resources, and emulating guest accesses to vPMU resources requires
expensive actions (expensive relative to the native instruction). The
overhead and resource competition results in degraded guest performance
and ultimately very poor vPMU accuracy.
To address the issues with the perf-emulated vPMU, introduce a "mediated
vPMU", where the data plane (PMCs and enable/disable knobs) is exposed
directly to the guest, but the control plane (event selectors and access
to fixed counters) is managed by KVM (via MSR interceptions). To allow
host perf usage of the PMU to (partially) co-exist with KVM/guest usage
of the PMU, KVM and perf will coordinate to a world switch between host
perf context and guest vPMU context near VM-Enter/VM-Exit.
Add two exported APIs, perf_{create,release}_mediated_pmu(), to allow KVM
to create and release a mediated PMU instance (per VM). Because host perf
context will be deactivated while the guest is running, mediated PMU usage
will be mutually exclusive with perf analysis of the guest, i.e. perf
events that do NOT exclude the guest will not behave as expected.
To avoid silent failure of !exclude_guest perf events, disallow creating a
mediated PMU if there are active !exclude_guest events, and on the perf
side, disallowing creating new !exclude_guest perf events while there is
at least one active mediated PMU.
Exempt PMU resources that do not support mediated PMU usage, i.e. that are
outside the scope/view of KVM's vPMU and will not be swapped out while the
guest is running.
Guard mediated PMU with a new kconfig to help readers identify code paths
that are unique to mediated PMU support, and to allow for adding arch-
specific hooks without stubs. KVM x86 is expected to be the only KVM
architecture to support a mediated PMU in the near future (e.g. arm64 is
trending toward a partitioned PMU implementation), and KVM x86 will select
PERF_GUEST_MEDIATED_PMU unconditionally, i.e. won't need stubs.
Immediately select PERF_GUEST_MEDIATED_PMU when KVM x86 is enabled so that
all paths are compile tested. Full KVM support is on its way...
[sean: add kconfig and WARNing, rewrite changelog, swizzle patch ordering]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-5-seanjc@google.com
|
|
Implement tas2563 support code in this common module so it could be
shared between multiple SOF machine drivers.
Signed-off-by: David Lin <david.lin@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251217110433.3558136-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF builds due to -fms-extensions. selftests (Alexei
Starovoitov), bpftool (Quentin Monnet).
- Fix build of net/smc when CONFIG_BPF_SYSCALL=y, but CONFIG_BPF_JIT=n
(Geert Uytterhoeven)
- Fix livepatch/BPF interaction and support reliable unwinding through
BPF stack frames (Josh Poimboeuf)
- Do not audit capability check in arm64 JIT (Ondrej Mosnacek)
- Fix truncated dmabuf BPF iterator reads (T.J. Mercier)
- Fix verifier assumptions of bpf_d_path's output buffer (Shuran Liu)
- Fix warnings in libbpf when built with -Wdiscarded-qualifiers under
C23 (Mikhail Gavrilov)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: add regression test for bpf_d_path()
bpf: Fix verifier assumptions of bpf_d_path's output buffer
selftests/bpf: Add test for truncated dmabuf_iter reads
bpf: Fix truncated dmabuf iterator reads
x86/unwind/orc: Support reliable unwinding through BPF stack frames
bpf: Add bpf_has_frame_pointer()
bpf, arm64: Do not audit capability check in do_jit()
libbpf: Fix -Wdiscarded-qualifiers under C23
bpftool: Fix build warnings due to MS extensions
net: smc: SMC_HS_CTRL_BPF should depend on BPF_JIT
selftests/bpf: Add -fms-extensions to bpf build flags
|
|
Multiple functions in the SCSI core accept an 'int reason' argument.
The 'int' type of these arguments doesn't make it clear what values are
acceptable for these arguments. Document which values are supported for
these arguments by introducing the enumeration type scsi_qc_status. 'qc'
in the type name stands for 'queuecommand' since the values passed as
the 'reason' argument are the .queuecommand() return values.
Cc: John Garry <john.g.garry@oracle.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251113181730.1109331-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.13
This patch set introduces reporting encryption information for Fibre
Channel HBAs.
First, the scsi_transport_fc layer is updated to include a new
fc_encryption_info attribute that is added to struct fc_rport.
Supporting sysfs and LLDD templates are provided.
Then, the lpfc driver is updated to utilize the new templates for
reporting encrypted fibre channel connections to upper layer.
The patches were cut against Martin's 6.19/scsi-queue tree.
Link: https://patch.msgid.link/20251211001659.138635-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Introduce a new structure for reporting an encrypted session over an
fc_rport. The encryption group is added as an attribute in struct
fc_rport and reports information in fc_encryption_info. This structure
contains a status member variable, which stores a bit value indicating
an encrypted session.
Signed-off-by: Sarah Catania <sarah.catania@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251211001659.138635-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, ufshcd_mcq_enable_esi() manually implements a
read-modify-write sequence using ufshcd_readl() and ufshcd_writel().
It also utilizes a hardcoded magic number (0x2) for the enable bit.
Use ufshcd_rmwl() helper, replace the magic number with the
ESI_ENABLE macro to improve code readability.
No functional change intended.
Signed-off-by: vamshi gajjela <vamshigajjela@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251211133227.4159394-1-vamshigajjela@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add emulation for REPORT IDENTIFYING INFORMATION command using the
configfs file 'pd_text_id_info' in target core module. The configfs file
is created in /sys/kernel/config/target/core/<backend type>/
<backing_store_name>/wwn/.
An emulation function, spc_emulate_report_id_info(), is defined to
return the identification string based on the contents of
'pd_text_id_info'.
The details of the REPORT IDENTIFYING INFORMATION command is defined in
section 6.32 of SPC4.
[mkp: checkpatch tweaks]
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251201110716.227588-1-gulam.mohamed@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A recent commit modified struct irdma_alloc_ucontext_resp by adding a
member with implicit padding in front of it, though this does not change
the offset of the data members other than m68k. Reported by
scripts/check-uapi.sh:
==== ABI differences detected in include/rdma/irdma-abi.h from 1dd7bde2e91c -> HEAD ====
[C] 'struct irdma_alloc_ucontext_resp' changed:
type size changed from 704 to 640 (in bits)
1 data member deletion:
'__u8 rsvd3[2]', at offset 640 (in bits) at irdma-abi.h:61:1
1 data member insertion:
'__u8 revd3[2]', at offset 592 (in bits) at irdma-abi.h:60:1
Change the size back to the previous version, and remove the implicit
padding by making it explicit and matching what x86-64 would do by placing
max_hw_srq_quanta member into a naturally aligned location.
Fixes: 563e1feb5f6e ("RDMA/irdma: Add SRQ support")
Link: https://patch.msgid.link/r/20251208133849.315451-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
On a few 32-bit architectures, the newly added ib_user_service_rec
structure is not 64-bit aligned the way it is on most regular ones.
Add explicit padding into the rdma_ucm_query_ib_service_resp and
rdma_ucm_resolve_ib_service structures that embed it, so that the layout
is compatible across all of them.
This is an ABI change on i386, aligning it with x86_64 and the other
64-bit architectures to avoid having to use a compat ioctl handler.
Fixes: 810f874eda8e ("RDMA/ucma: Support query resolved service records")
Link: https://patch.msgid.link/r/20251208133311.313977-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
A MERT OA unit is available in the SoC on some platforms. Add support
for this OA unit and expose it to userspace. The MERT OA unit does not
have any HW engines attached, but is otherwise similar to an OAM unit.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251205212613.826224-2-ashutosh.dixit@intel.com
|
|
Not sure how useful it's gonna be in practice, but the definition is
missing (unlike the previously-unused SC8280XP_MXC-non-_AO), so add it
to allow the driver to create the corresponding pmdomain.
Fixes: dbfb5f94e084 ("dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20251202-topic-8280_mxc-v2-1-46cdf47a829e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add system cache table(SCT) and configs for Glymur SoC
Updated the list of usecase id's to enable additional clients for Glymur
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251211-glymur_llcc_enablement-v3-2-43457b354b0d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here.
Fixes: 1abe9b8a138c ("Btrfs: add initial tracepoint support for btrfs")
Reported-by: syzbot+d991fea1b4b23b1f6bf8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d991fea1b4b23b1f6bf8
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Similarly, on jack insert/removal we needlesly boot up the firmware to check
the jack status, which needs no DSP/firmware communication.
The on-demand DSP boot will make sure that we boot the DSP firmware up only
when it is needed - for audio activity, in other cases the firmware will be
not booted up, which saves time.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
The on-demand boot has been tested in our CI for more than half a year
and so far no issues have been seen on supported platforms since it's
introduction to our development tree (sof-dev).
|
|
GFX 1250 allows the debugger to subcribe to LDS out-of-range read/write
memory violations.
Bump IOCTL minor version and flag KFD capabilities for enablement
hint.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix kernel-doc comments in include/linux/shdma-base.h to avoid
most warnings:
- prefix an enum name with "enum"
- prefix enum values with '@'
- prefix struct member names with '@'
shdma-base.h:28: warning: cannot understand function prototype:
'enum shdma_pm_state '
Warning: shdma-base.h:103 struct member 'desc_completed' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'halt_channel' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'channel_busy' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'slave_addr' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'desc_setup' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'set_slave' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'setup_xfer' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'start_xfer' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'embedded_desc' not described
in 'shdma_ops'
Warning: shdma-base.h:103 struct member 'chan_irq' not described
in 'shdma_ops'
This one is not fixed: from 4f46f8ac80416:
Warning: shdma-base.h:103 struct member 'get_partial' not described
in 'shdma_ops'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251104002001.445297-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use the correct enum name in its kernel-doc heading.
Add ending ':' to struct member names.
Drop the @id: kernel-doc entry since there is no struct member named 'id'.
edma.h:46: warning: expecting prototype for struct dw_edma_core_ops.
Prototype was for struct dw_edma_plat_ops instead
Warning: edma.h:101 struct member 'ops' not described in 'dw_edma_chip'
Warning: edma.h:101 struct member 'flags' not described in 'dw_edma_chip'
Warning: edma.h:101 struct member 'reg_base' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_wr_cnt' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_rd_cnt' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_region_wr' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'll_region_rd' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'dt_region_wr' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'dt_region_rd' not described
in 'dw_edma_chip'
Warning: edma.h:101 struct member 'mf' not described in 'dw_edma_chip'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251101191524.1991135-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Netfilter code (net/netfilter/nft_log.c and net/netfilter/xt_AUDIT.c)
have to be kept in sync. Both source files had duplicated versions of
audit_ip4() and audit_ip6() functions, which can result in lack of
consistency and/or duplicated work.
This patch adds a helper function in audit.c that can be called by
netfilter code commonly, aiming to improve maintainability and
consistency.
Suggested-by: Florian Westphal <fw@strlen.de>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
In the EFI config table, rename LINUX_EFI_SCREEN_INFO_TABLE_GUID to
LINUX_EFI_PRIMARY_DISPLAY_TABLE_GUID. Read sysfb_primary_display from
the entry. In addition to the screen_info, the entry now also contains
EDID information.
In libstub, replace struct screen_info with struct sysfb_display_info
from the kernel's sysfb_primary_display and rename functions
accordingly. Transfer it to the runtime kernel using the kernel's
global state or the LINUX_EFI_PRIMARY_DISPLAY_TABLE_GUID config-table
entry.
With CONFIG_FIRMWARE_EDID=y, libstub now transfers the GOP device's EDID
information to the kernel. If CONFIG_FIRMWARE_EDID=n, EDID information
is disabled. Make the Kconfig symbol CONFIG_FIRMWARE_EDID available with
EFI. Setting the value to 'n' disables EDID support.
Also rename screen_info.c to primary_display.c and adapt the contained
comment according to the changes.
Link: https://lore.kernel.org/all/20251126160854.553077-8-tzimmermann@suse.de/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
[ardb: depend on EFI_GENERIC_STUB not EFI, fix conflicts after dropping
the preceding patch from the series]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move x86's edid_info into sysfb_primary_display as a new field named
edid. Adapt all users.
An instance of edid_info has only been defined on x86. With the move
into sysfb_primary_display, it becomes available on all architectures.
Therefore remove this contraint from CONFIG_FIRMWARE_EDID.
x86 fills the EDID data from boot_params.edid_info. DRM drivers pick
up the raw data and make it available to DRM clients. Replace the
drivers' references to edid_info and instead use the sysfb_display_info
as passed from sysfb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Replace the global screen_info with sysfb_primary_display of type
struct sysfb_display_info. Adapt all users of screen_info.
Instances of screen_info are defined for x86, loongarch and EFI,
with only one instance compiled into a specific build. Replace all
of them with sysfb_primary_display.
All existing users of screen_info are updated by pointing them to
sysfb_primary_display.screen instead. This introduces some churn to
the code, but has no impact on functionality.
Boot parameters and EFI config tables are unchanged. They transfer
screen_info as before. The logic in EFI's alloc_screen_info() changes
slightly, as it now returns the screen field of sysfb_primary_display.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add struct sysfb_display_info to wrap display-related state. For now
it contains only the screen's video mode. Later EDID will be added as
well.
This struct will be helpful for passing display state to sysfb drivers
or from the EFI stub library.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Replace usage of global screen_info with local pointers. This will
later reduce churn when screen_info is being moved.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add support for Dosilicon DS35Q1GA (3.3V) and DS35M1GA (1.8V) SPI NAND.
These are 1Gbit (128MB) devices with:
- 2048 byte pages + 64 byte OOB
- 64 pages per block, 1024 blocks
- On-die 4-bit ECC per 512 byte sector
The 64-byte OOB area is divided into 4 segments of 16 bytes, with each
segment containing 8 bytes of user data (M2+M1) and 8 bytes of ECC
parity (R1). This provides 30 bytes of usable OOB space after reserving
2 bytes for the bad block marker.
Tested on Genexis Platinum 4410 (EcoNet EN751221) by writing known
patterns to OOB and verifying ECC parity placement in R1 regions.
Datasheet:
https://www.dosilicon.com/resources/SPI%20NAND/DS35X1GAXXX_rev08.pdf
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Pull shmem rename fixes from Al Viro:
"A couple of shmem rename fixes - recent regression from tree-in-dcache
series and older breakage from stable directory offsets stuff"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
shmem: fix recovery on rename failures
shmem_whiteout(): fix regression from tree-in-dcache series
|
|
maple_tree insertions can fail if we are seriously short on memory;
simple_offset_rename() does not recover well if it runs into that.
The same goes for simple_offset_rename_exchange().
Moreover, shmem_whiteout() expects that if it succeeds, the caller will
progress to d_move(), i.e. that shmem_rename2() won't fail past the
successful call of shmem_whiteout().
Not hard to fix, fortunately - mtree_store() can't fail if the index we
are trying to store into is already present in the tree as a singleton.
For simple_offset_rename_exchange() that's enough - we just need to be
careful about the order of operations.
For simple_offset_rename() solution is to preinsert the target into the
tree for new_dir; the rest can be done without any potentially failing
operations.
That preinsertion has to be done in shmem_rename2() rather than in
simple_offset_rename() itself - otherwise we'd need to deal with the
possibility of failure after successful shmem_whiteout().
Fixes: a2e459555c5f ("shmem: stable directory offsets")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use the correct struct member names to avoid kernel-doc warnings:
Warning: include/linux/lsm_hooks.h:83 struct member 'name' not described
in 'lsm_id'
Warning: include/linux/lsm_hooks.h:183 struct member 'initcall_device' not
described in 'lsm_info'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
For example,
1327.539878: f2fs_preload_pages_start: dev = (252,16), ino = 14, i_size = 4294967296 start: 0, end: 8191
1327.539878: page_cache_sync_ra: dev=252:16 ino=e index=0 req_count=8192 order=9 size=0 async_size=0 ra_pages=4096 mmap_miss=0 prev_pos=-1
1327.539879: page_cache_ra_order: dev=252:16 ino=e index=0 order=9 size=4096 async_size=2048 ra_pages=4096
1327.541895: f2fs_readpages: dev = (252,16), ino = 14, start = 0 nrpage = 4096
1327.541930: f2fs_lookup_extent_tree_start: dev = (252,16), ino = 14, pgofs = 0, type = Read
1327.541931: f2fs_lookup_read_extent_tree_end: dev = (252,16), ino = 14, pgofs = 0, read_ext_info(fofs: 0, len: 1048576, blk: 4221440)
1327.541931: f2fs_map_blocks: dev = (252,16), ino = 14, file offset = 0, start blkaddr = 0x406a00, len = 0x1000, flags = 2, seg_type = 8, may_create = 0, multidevice = 0, flag = 0, err = 0
1327.541989: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 0, nr_pages = 512, dirty = 0, uptodate = 0
1327.542012: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 512, nr_pages = 512, dirty = 0, uptodate = 0
1327.542036: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 1024, nr_pages = 512, dirty = 0, uptodate = 0
1327.542080: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 1536, nr_pages = 512, dirty = 0, uptodate = 0
1327.542127: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 2048, nr_pages = 512, dirty = 0, uptodate = 0
1327.542151: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 2560, nr_pages = 512, dirty = 0, uptodate = 0
1327.542196: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 3072, nr_pages = 512, dirty = 0, uptodate = 0
1327.542219: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 3584, nr_pages = 512, dirty = 0, uptodate = 0
1327.542239: f2fs_submit_read_bio: dev = (252,16)/(252,16), rw = READ(R), DATA, sector = 33771520, size = 16777216
1327.542269: page_cache_sync_ra: dev=252:16 ino=e index=4096 req_count=8192 order=9 size=4096 async_size=2048 ra_pages=4096 mmap_miss=0 prev_pos=-1
1327.542289: page_cache_ra_order: dev=252:16 ino=e index=4096 order=9 size=4096 async_size=2048 ra_pages=4096
1327.544485: f2fs_readpages: dev = (252,16), ino = 14, start = 4096 nrpage = 4096
1327.544521: f2fs_lookup_extent_tree_start: dev = (252,16), ino = 14, pgofs = 4096, type = Read
1327.544521: f2fs_lookup_read_extent_tree_end: dev = (252,16), ino = 14, pgofs = 4096, read_ext_info(fofs: 0, len: 1048576, blk: 4221440)
1327.544522: f2fs_map_blocks: dev = (252,16), ino = 14, file offset = 4096, start blkaddr = 0x407a00, len = 0x1000, flags = 2, seg_type = 8, may_create = 0, multidevice = 0, flag = 0, err = 0
1327.544550: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 4096, nr_pages = 512, dirty = 0, uptodate = 0
1327.544575: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 4608, nr_pages = 512, dirty = 0, uptodate = 0
1327.544601: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 5120, nr_pages = 512, dirty = 0, uptodate = 0
1327.544647: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 5632, nr_pages = 512, dirty = 0, uptodate = 0
1327.544692: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 6144, nr_pages = 512, dirty = 0, uptodate = 0
1327.544734: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 6656, nr_pages = 512, dirty = 0, uptodate = 0
1327.544777: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 7168, nr_pages = 512, dirty = 0, uptodate = 0
1327.544805: f2fs_read_folio: dev = (252,16), ino = 14, DATA, FILE, index = 7680, nr_pages = 512, dirty = 0, uptodate = 0
1327.544826: f2fs_submit_read_bio: dev = (252,16)/(252,16), rw = READ(R), DATA, sector = 33804288, size = 16777216
1327.544852: f2fs_preload_pages_end: dev = (252,16), ino = 14, i_size = 4294967296 start: 8192, end: 8191
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have an
Interrupt Controller (ICU) that supports interrupts from external pins IRQ0
to IRQ15, and SEI, and software-triggered interrupts INTCPU0 to INTCPU15.
INTCPU0 to INTCPU13, IRQ0 to IRQ13 are non-safety interrupts, while
INTCPU14, INTCPU15, IRQ14, IRQ15 and SEI are safety interrupts, and are
exposed via a separate register space.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251201112933.488801-3-cosmin-gabriel.tanislav.xa@renesas.com
|
|
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124
...
Call Trace:
<TASK>
alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416
___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388
kmalloc_noprof include/linux/slab.h:909 [inline]
kmalloc_array_noprof include/linux/slab.h:948 [inline]
xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158
drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797
drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894
xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
"
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450
Cc: <stable@vger.kernel.org> # v6.12+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
|
|
Add infrastructure to redirect interrupt handler execution to a
different CPU when the current CPU is not part of the interrupt's CPU
affinity mask.
This is primarily aimed at (de)multiplexed interrupts, where the child
interrupt handler runs in the context of the parent interrupt handler,
and therefore CPU affinity control for the child interrupt is typically
not available.
With the new infrastructure, the child interrupt is allowed to freely
change its affinity setting, independently of the parent. If the
interrupt handler happens to be triggered on an "incompatible" CPU (a
CPU that's not part of the child interrupt's affinity mask), the handler
is redirected and runs in IRQ work context on a "compatible" CPU.
No functional change is being made to any existing irqchip driver, and
irqchip drivers must be explicitly modified to use the newly added
infrastructure to support interrupt redirection.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/linux-pci/878qpg4o4t.ffs@tglx/
Link: https://patch.msgid.link/20251128212055.1409093-2-rrendec@redhat.com
|
|
setup_percpu_irq() was always a bad kludge, and should have never
been there the first place. Now that the last users are gone,
remove it for good.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251210082242.360936-7-maz@kernel.org
|
|
With the IRQ timing stuff being gone, there is no need to specify a flag
when requesting a percpu interrupt. Not only IRQF_TIMER was the only flag
(set of flags actually) allowed, but nobody ever passed it.
Get rid of __request_percpu_irq(), which was only getting 0 as flags, and
promote request_percpu_irq_affinity() as its replacement.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20251210082242.360936-3-maz@kernel.org
|
|
The IRQ timing tracking infrastructure was merged in 2019, but was never
plumbed in, is not selectable, and is therefore never used.
As Daniel agrees that there is little hope for this infrastructure to be
completed in the near term, drop it altogether.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/87zf7vex6h.wl-maz@kernel.org
Link: https://patch.msgid.link/20251210082242.360936-2-maz@kernel.org
|
|
fchmodat2(), introduced in version 6.6 is currently not in the change
attribute class of audit. Calling fchmodat2() to change a file
attribute in the same fashion than chmod() or fchmodat() will bypass
audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds fchmodat2() to the change attributes class.
Signed-off-by: Jeffrey Bencteux <jeff@bencteux.fr>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Eliminate all kernel-doc warnings in <linux/msi.h>:
- add "struct" to struct kernel-doc headers
- add missing struct member descriptions or correct typos in them
Fixes these warnings:
Warning: include/linux/msi.h:60 cannot understand function prototype:
'struct msi_msg'
Warning: include/linux/msi.h:73 struct member 'arch_addr_lo' not described
in 'msi_msg'
Warning: include/linux/msi.h:73 struct member 'arch_addr_hi' not described
in 'msi_msg'
Warning: include/linux/msi.h:106 cannot understand function prototype:
'struct pci_msi_desc'
Warning: include/linux/msi.h:124 struct member 'msi_attrib' not described
in 'pci_msi_desc'
Warning: include/linux/msi.h:204 struct member 'sysfs_attrs' not described
in 'msi_desc'
Warning: include/linux/msi.h:227 struct member 'domain' not described in
'msi_dev_domain'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251214202341.2205675-1-rdunlap@infradead.org
|
|
New network transport protocols want NIC drivers to get hardware timestamps
of all incoming packets, and possibly all outgoing packets.
One example is the upcoming 'Swift congestion control' which is used by TCP
transport and is the primary need for timecounter_cyc2time(). This means
timecounter_cyc2time() can be called more than 100 million times per second
on a busy server.
Inlining timecounter_cyc2time() brings a 12% improvement on a UDP receive
stress test on a 100Gbit NIC.
Note that FDO, LTO, PGO are unable to magically help for this case,
presumably because NIC drivers are almost exclusively shipped as modules.
Add an unlikely() around the cc_cyc2ns_backwards() case, even if FDO (when
used) is able to take care of this optimization.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://research.google/pubs/swift-delay-is-simple-and-effective-for-congestion-control-in-the-datacenter/
Link: https://patch.msgid.link/20251129095740.3338476-1-edumazet@google.com
|
|
Requesting a delegation on a file from the userland fcntl() interface
currently succeeds when there are conflicting opens present.
This is because the lease handling code ignores conflicting opens for
FL_LAYOUT and FL_DELEG leases. This was a hack put in place long ago,
because nfsd already checks for conflicts in its own way. The kernel
needs to perform this check for userland delegations the same way it is
done for leases, however.
Make this dependent on the lease_manager by adding a new
->lm_open_conflict() lease_manager operation and have
generic_add_lease() call that instead of check_conflicting_open().
Morph check_conflicting_open() into a ->lm_open_conflict() op that is
only called for userland leases/delegations. Set the
->lm_open_conflict() operations for nfsd to trivial functions that
always return 0.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251204-dir-deleg-ro-v2-2-22d37f92ce2c@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Zhang Yi points out that the dynamic folio_batch allocation in
iomap_fill_dirty_folios() is problematic for the ext4 on iomap work
that is under development because it doesn't sufficiently handle the
allocation failure case (by allowing a retry, for example). We've
also seen lockdep (via syzbot) complain recently about the scope of
the allocation.
The dynamic allocation was initially added for simplicity and to
help indicate whether the batch was used or not by the calling fs.
To address these issues, put the batch on the stack of
iomap_zero_range() and use a flag to control whether the batch
should be used in the iomap folio lookup path. This keeps things
simple and eliminates allocation issues with lockdep and for ext4 on
iomap.
While here, also clean up the fill helper signature to be more
consistent with the underlying filemap helper. Pass through the
return value of the filemap helper (folio count) and update the
lookup offset via an out param.
Fixes: 395ed1ef0012 ("iomap: optional zero range dirty folio processing")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://patch.msgid.link/20251208140548.373411-1-bfoster@redhat.com
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
While the used GML is consistent with the pattern for other Intel * Lake
SoCs, the de facto use is GLK. Update the acronym and users accordingly.
Note, a handful of the drivers for Gemini Lake in the Linux kernel use
GLK already (LPC, MEI, pin control, SDHCI, ...) and even some in ASoC.
The only ones in this patch used the inconsistent one.
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251212181742.3944789-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When there is no fallback possibility available for the function topology
use it is better to try to create a profile for the card in best effort
manner, leaving out non supported links for example.
As an example: some laptops present SSPx-BT link but we don't have fragment
yet to support this. If we only have support for functional topology
without monolithic fallback then we would fail the card creation.
The reason why the monolithic topology works on the same device is that it
does not have the SSPx-BT link handled, it is ignored.
In case when there is no fallback possibility we should try to create the
card with links that we support as best effort instead of failing and
leaving the user without a card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251215101036.9370-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20251215132946.2155-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
