| Age | Commit message (Collapse) | Author |
|---|
|
Some USB-C hubs and adapters have buggy firmware where multi-byte AUX
reads consistently timeout, while single-byte reads from the same address
work correctly.
Known affected devices that exhibit this issue:
- Lenovo USB-C to VGA adapter (VIA VL817 chipset)
idVendor=17ef, idProduct=7217
- Dell DA310 USB-C mobile adapter hub
idVendor=413c, idProduct=c010
Analysis of the failure pattern shows:
- Single-byte probes to 0xf0000 (LTTPR) succeed
- Single-byte probes to 0x00102 (TRAINING_AUX_RD_INTERVAL) succeed
- Multi-byte reads from 0x00000 (DPCD capabilities) timeout with -ETIMEDOUT
- Retrying does not help - the failure is consistent across all attempts
The issue appears to be a firmware bug in the AUX transaction handling
that specifically affects multi-byte reads.
Add a fallback mechanism in drm_dp_dpcd_read_data() that attempts
byte-by-byte reading when the normal multi-byte read fails. This
workaround only activates for adapters that fail the standard read path,
ensuring no impact on correctly functioning hardware.
Tested with:
- Lenovo USB-C to VGA adapter (VIA VL817) - now works with fallback
- Dell DA310 USB-C hub - now works with fallback
- Dell/Analogix Slimport adapter - continues to work with normal path
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251204024647.1462866-1-acelan.kao@canonical.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fix from Rafael Wysocki:
"This fixes the ACPI/PCI legacy interrupts (INTx) parsing in the case
when the ACPI Global System Interrupt (GSI) value is a 32-bit one with
the MSB set.
That was interpreted as a negative integer and caused
acpi_pci_link_allocate_irq() to fail and acpi_irq_get_penalty() to
trigger an out-of-bounds array dereference (Lorenzo Pieralisi)"
* tag 'acpi-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCI: IRQ: Fix INTx GSIs signedness
|
|
Pull drm fixes from Dave Airlie:
"I missed the drm-rust fixes tree for last week, so this catches up on
that, along with amdgpu, and then some misc fixes across a few
drivers. I hadn't got an xe pull by the time I sent this, I suspect
one will arrive 10 mins after, but I don't think there is anything
that can't wait for next week.
Things seem to have picked up a little with people coming back from
holidays,
MAINTAINERS:
- Fix Nova GPU driver git links
- Fix typo in TYR driver entry preventing correct behavior of
scripts/get_maintainer.pl
- Exclude TYR driver from DRM MISC
nova-core:
- Correctly select RUST_FW_LOADER_ABSTRACTIONS to prevent build
errors
- Regenerate nova-core bindgen bindings with '--explicit-padding' to
avoid uninitialized bytes
- Fix length of received GSP messages, due to miscalculated message
payload size
- Regenerate bindings to derive MaybeZeroable
- Use a bindings alias to derive the firmware version
exynos:
- hdmi: replace system_wq with system_percpu_wq
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and
post-disable operations, as it breaks other bridge drivers
nouveau:
- Fix regression from fwsec s/r fix
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
amdgpu:
- Clang fixes
- Navi1x PCIe DPM fixes
- Ring reset fixes
- ISP suspend fix
- Analog DC fixes
- VPE fixes
- Mode1 reset fix
radeon:
- Variable sized array fix"
* tag 'drm-fixes-2026-01-09' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
Reapply "Revert "drm/amd: Skip power ungate during suspend for VPE""
drm/amd/display: Check NULL before calling dac_load_detection
drm/amd/pm: Disable MMIO access during SMU Mode 1 reset
drm/exynos: hdmi: replace use of system_wq with system_percpu_wq
drm/fb-helper: Fix vblank timeout during suspend/reset
PCI/VGA: Don't assume the only VGA device on a system is `boot_vga`
drm/amdgpu: Fix query for VPE block_type and ip_count
drm/amd/display: Add missing encoder setup to DACnEncoderControl
drm/amd/display: Correct color depth for SelectCRTC_Source
drm/amd/amdgpu: Fix SMU warning during isp suspend-resume
drm/amdgpu: always backup and reemit fences
drm/amdgpu: don't reemit ring contents more than once
drm/amd/pm: force send pcie parmater on navi1x
drm/amd/pm: fix wrong pcie parameter on navi1x
drm/radeon: Remove __counted_by from ClockInfoArray.clockInfo[]
drm/amd/display: Reduce number of arguments of dcn30's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dcn30's CalculatePrefetchSchedule()
drm/amd/display: Apply e4479aecf658 to dml
nouveau: don't attempt fwsec on sb on newer platforms
drm/tidss: Fix enable/disable order
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Remove incorrect __user annotation from struct xattr_args::value
- Documentation fix: Add missing kernel-doc description for the @isnew
parameter in ilookup5_nowait() to silence Sphinx warnings
- Documentation fix: Fix kernel-doc comment for __start_dirop() - the
function name in the comment was wrong and the @state parameter was
undocumented
- Replace dynamic folio_batch allocation with stack allocation in
iomap_zero_range(). The dynamic allocation was problematic for
ext4-on-iomap work (didn't handle allocation failure properly) and
triggered lockdep complaints. Uses a flag instead to control batch
usage
- Re-add #ifdef guards around PIDFD_GET_<ns-type>_NAMESPACE ioctls.
When a namespace type is disabled, ns->ops is NULL, causes crashes
during inode eviction when closing the fd. The ifdefs were removed in
a recent simplification but are still needed
- Fixe a race where a folio could be unlocked before the trailing zeros
(for EOF within the page) were written
- Split out a dedicated lease_dispose_list() helper since lease code
paths always know they're disposing of leases. Removes unnecessary
runtime flag checks and prepares for upcoming lease_manager
enhancements
- Fix userland delegation requests succeeding despite conflicting
opens. Previously, FL_LAYOUT and FL_DELEG leases bypassed conflict
checks (a hack for nfsd). Adds new ->lm_open_conflict() lease_manager
operation so userland delegations get proper conflict checking while
nfsd can continue its own conflict handling
- Fix LOOKUP_CACHED path lookups incorrectly falling through to the
slow path. After legitimize_links() calls were conditionally elided,
the routine would always fail with LOOKUP_CACHED regardless of
whether there were any links. Now the flag is checked at the two
callsites before calling legitimize_links()
- Fix bug in media fd allocation in media_request_alloc()
- Fix mismatched API calls in ecryptfs_mknod(): was calling
end_removing() instead of end_creating() after
ecryptfs_start_creating_dentry()
- Fix dentry reference count leak in ecryptfs_mkdir(): a dget() of the
lower parent dir was added but never dput()'d, causing BUG during
lower filesystem unmount due to the still-in-use dentry
* tag 'vfs-6.19-rc5.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pidfs: protect PIDFD_GET_* ioctls() via ifdef
ecryptfs: Release lower parent dentry after creating dir
ecryptfs: Fix improper mknod pairing of start_creating()/end_removing()
get rid of bogus __user in struct xattr_args::value
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs: make sure to fail try_to_unlazy() and try_to_unlazy() for LOOKUP_CACHED
netfs: Fix early read unlock of page with EOF in middle
filelock: allow lease_managers to dictate what qualifies as a conflict
filelock: add lease_dispose_list() helper
iomap: replace folio_batch allocation with stack allocation
media: mc: fix potential use-after-free in media_request_alloc()
|
|
The resctrl file system layer passes the domain, RMID, and event id to the
architecture to fetch an event counter.
Fetching a telemetry event counter requires additional information that is
private to the architecture, for example, the offset into MMIO space from
where the counter should be read.
Add mon_evt::arch_priv that architecture can use for any private data related
to the event. The resctrl filesystem initializes mon_evt::arch_priv when the
architecture enables the event and passes it back to architecture when needing
to fetch an event counter.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
The telemetry event aggregators of the Intel Clearwater Forest CPU support two
RMID-based feature types: "energy" with GUID 0x26696143¹, and "perf" with
GUID 0x26557651².
The event counter offsets in an aggregator's MMIO space are arranged in groups
for each RMID.
E.g., the "energy" counters for GUID 0x26696143 are arranged like this:
MMIO offset:0x0000 Counter for RMID 0 PMT_EVENT_ENERGY
MMIO offset:0x0008 Counter for RMID 0 PMT_EVENT_ACTIVITY
MMIO offset:0x0010 Counter for RMID 1 PMT_EVENT_ENERGY
MMIO offset:0x0018 Counter for RMID 1 PMT_EVENT_ACTIVITY
...
MMIO offset:0x23F0 Counter for RMID 575 PMT_EVENT_ENERGY
MMIO offset:0x23F8 Counter for RMID 575 PMT_EVENT_ACTIVITY
After all counters there are three status registers that provide indications
of how many times an aggregator was unable to process event counts, the time
stamp for the most recent loss of data, and the time stamp of the most recent
successful update.
MMIO offset:0x2400 AGG_DATA_LOSS_COUNT
MMIO offset:0x2408 AGG_DATA_LOSS_TIMESTAMP
MMIO offset:0x2410 LAST_UPDATE_TIMESTAMP
Define event_group structures for both of these aggregator types and define
the events tracked by the aggregators in the file system code.
PMT_EVENT_ENERGY and PMT_EVENT_ACTIVITY are produced in fixed point format.
File system code must output as floating point values.
¹https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-ENERGY/cwf_aggregator.xml
²https://github.com/intel/Intel-PMT/blob/main/xml/CWF/OOBMSM/RMID-PERF/cwf_aggregator.xml
[ bp: Massage commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Add a new PERF_PKG resource and introduce package level scope for monitoring
telemetry events so that CPU hotplug notifiers can build domains at the
package granularity.
Use the physical package ID available via topology_physical_package_id()
to identify the monitoring domains with package level scope. This enables
user space to use:
/sys/devices/system/cpu/cpuX/topology/physical_package_id
to identify the monitoring domain a CPU is associated with.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Enumeration of Intel telemetry events is an asynchronous process involving
several mutually dependent drivers added as auxiliary devices during the
device_initcall() phase of Linux boot. The process finishes after the probe
functions of these drivers completes. But this happens after
resctrl_arch_late_init() is executed.
Tracing the enumeration process shows that it does complete a full seven
seconds before the earliest possible mount of the resctrl file system (when
included in /etc/fstab for automatic mount by systemd).
Add a hook for use by telemetry event enumeration and initialization and
run it once at the beginning of resctrl mount without any locks held.
The architecture is responsible for any required locking.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20260105191711.GBaVwON5nZn-uO6Sqg@fat_crate.local
|
|
Since commit 98e48cd9283d ("regulator: core: resolve supply for
boot-on/always-on regulators"), the regulator core returns
-EPROBE_DEFER if a supply can not be resolved at regulator_register()
time due to set_machine_constraints() requiring that supply (e.g.
because of always-on or boot-on).
In some hardware designs, multiple PMICs are used where individual
rails of each act as supplies for rails of the other, and vice-versa.
In such a design no PMIC driver can probe when registering one top-
level regulator device (as is common practice for almost all regulator
drivers in Linux) since that commit. Supplies are only considered when
their driver has fully bound, but because in a design like the above
two drivers / devices depend on each other, neither will have fully
bound while the other probes. The Google Pixel 6 and 6 Pro (oriole and
raven) are examples of such a design.
One way to make this work would be to register each rail as an
individual device, rather than just one top-level regulator device.
Then, fw-devlink and Linux' driver core could do their usual handling
of deferred device probe as each rail would be probed individually.
This approach was dismissed in [1] as each regulator driver would have
to take care of this itself.
Alternatively, we can change the regulator core to not fail
regulator_register() if a rail's required supply can not be resolved
while keeping the intended change from above mentioned commit, and
instead retry whenever a new rail is registered. This commit implements
such an approach:
If set_machine_constraints() requests probe deferral,
regulator_register() still succeeds and we retry setting
constraints as part of regulator_resolve_supply().
We still do not enable the regulator or allow consumers to use it
until constraints have been set (including resolution of the
supply) to prevent enabling of a regulator before its supply.
With this change, we keep track of regulators with missing required
supplies and can therefore try to resolve them again and try to set
the constraints again once more regulators become available.
Care has to be taken to not allow consumers to use regulators that
haven't had their constraints set yet. regulator_get() ensures that
and now returns -EPROBE_DEFER in that case.
The implementation is straight-forward, thanks to our newly introduced
regulator-bus. Locking in regulator_resolve_supply() has to be done
carefully, as a combination of regulator_(un)lock_two() and
regulator_(un)lock_dependent() is needed. The reason is that
set_machine_constraints() might call regulator_enable() which needs
rdev and all its dependents locked, but everything else requires to
only have rdev and its supply locked.
Link: https://lore.kernel.org/all/aRn_-o-vie_QoDXD@sirena.co.uk/ [1]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-8-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When a regulator A and its supply B are provided by different devices,
the driver implementing B might be last to probe (with A still
pending resolution of its supply B). While we try to resolve all
pending supplies for all regulators (including A) during
regulator_register() of B via regulator_register_resolve_supply(),
supply resolution will still not work for A as the driver for B hasn't
finished binding to the PMIC device corresponding to B at that stage
yet. The regulator core explicitly only allows supplies from other
devices to be used once the relevant driver has fully bound, mainly to
avoid having to deal with cases where B itself might -EPROBE_DEFER.
In this case, A's supply will only be resolved as part of the core's
regulator_init_complete_work_function(), which currently is scheduled
to run after 30s. This was added as a work-around in
commit 3827b64dba27 ("regulator: core: Resolve supplies before
disabling unused regulators") to cover this situation.
There are two problems with that approach:
* it potentially runs long after all our consumers have probed
* an upcoming change will allow regulator_register() to complete
successfully even when required supplies (e.g. due to always-on or
boot-on) are missing at register time, deferring full configuration
of the regulator (and usability by consumers, i.e. usually consumer
probe) until the supply becomes available.
Resolving supplies in the late work func can therefore make it
impossible for consumers to probe at all, as the driver core will not
know to reprobe consumers when supplies have resolved.
We could schedule an earlier work to try to resolve supplies sooner,
but that'd be racy as consumers of A might try to probe before A's
supply gets fully resolved via this extra work.
Instead, add a very simple regulator bus and add a dummy device with a
corresponding driver to it for each regulator that is missing its
supply during regulator_register(). This way, the driver core will call
our bus' probe whenever a new (regulator) device was successfully
bound, allowing us to retry resolving the supply during (our bus) probe
and to bind this dummy device if successful. In turn this means the
driver core will see a newly bound device and retry probing of all
pending consumers, if any.
With that in place, we can avoid walking the full list of all known
regulators to try resolve missing supplies during regulator_register(),
as the driver core will invoke the bus probe for regulators that are
still pending their supplies. We can also drop the code trying to
resolve supplies one last time before unused regulators get disabled,
as all supplies should have resolved at that point in time, and if they
haven't then there's no point in trying again, as the outcome won't
change.
Note: We can not reuse the existing struct device created for each
rail, as a device can not be part of a class and a bus simultaneously.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260109-regulators-defer-v2-7-1a25dc968e60@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas RZ/T2H and RZ/N2H PCLKCAN Clock DT Binding Definitions
PCLKCAN Clock DT binding definitions for the Renesas RZ/T2H (R9A09G077)
and RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
|
|
Renesas RZ/T2H and RZ/N2H PCLKCAN Clock DT Binding Definitions
PCLKCAN Clock DT binding definitions for the Renesas RZ/T2H (R9A09G077)
and RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- draw: Add API to check if a format conversion can be done
- panic: Rename draw_panic_static_* to draw_panic_screen_*, Add kunit
tests
- shmem: Improve tests
Driver Changes:
- ast: Big endian fixes
- etnaviv: Add PPU flop reset support
- panfrost: Add GPU_PM_RT support for RZ/G3E SoC
- panthor: multiple fixes around VM termination, huge page support
- pl111: Fix build regression
- v3d: Fix DMA segment size
- bridge:
- Add connector argument to .hpd_notify
- Plenty of patches to convert existing drivers to refcounting
- Convert Rockchip's inno hdmi support to a proper bridge
- lontium-lt9611uxc: Switch to HDMI audio helpers
- panel:
- New panel: BOE NV140WUM-T08
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260108-literate-nyala-of-courtesy-de501a@houat
|
|
Sometimes the user needs to split each entry on the mapped scatter list
due to DMA length constrains. This helper returns a number of entities
assuming that each of them is not bigger than supplied maximum length.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260108105619.3513561-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
|
|
Extracting common header file, which will be shared by clock and reset
drivers. So will make it easy to add reset driver for K3 SoC later.
Link: https://lore.kernel.org/r/20260108-k3-clk-v5-4-42a11b74ad58@gentoo.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add compatible strings for clock drivers to support Spacemit K3 SoC,
also includes all the defined clock IDs.
The SpacemiT K3 SoC clock IP is scattered over several different blocks,
which are APBC, APBS, APMU, DCIU, MPMU, all of them are capable of
generating clock and reset signals. APMU and MPMU have additional Power
Domain management functionality.
Following is a brief list that shows devices managed in each block:
APBC: UART, GPIO, PWM, SPI, TIMER, I2S, IR, DR, TSEN, IPC, CAN
APBS: various PPL clocks control
APMU: CCI, CPU, CSI, ISP, LCD, USB, QSPI, DMA, VPU, GPU, DSI, PCIe, EMAC..
DCID: SRAM, DMA, TCM
MPMU: various PLL1 derived clocks, UART, WATCHDOG, I2S
Link: https://lore.kernel.org/r/20260108-k3-clk-v5-1-42a11b74ad58@gentoo.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Inspired by yet another syzbot report.
IPv6 tunnels call netdev_lockdep_set_classes() for each tunnel type,
while IPv4 currently centralizes netdev_lockdep_set_classes() call from
ip_tunnel_init().
Make ip_tunnel_init() a macro, so that we have different lockdep
classes per tunnel type.
Fixes: 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers")
Reported-by: syzbot+1240b33467289f5ab50b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/695d439f.050a0220.1c677c.0347.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260106172426.1760721-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to prepare adding clock driver for new K3 SoC, extract generic
code to a separate common ccu header file, so they are not defined
in K1 SoC-specific file, and then can be shared by all clock drivers.
Link: https://lore.kernel.org/r/20260108-06-k1-clk-common-v4-1-badf635993d3@gentoo.org
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Mark vmcs12 pages as dirty (in KVM's dirty log bitmap) if and only if the
page is mapped, i.e. if the page is actually "active" in vmcs02. For some
pages, KVM simply disables the associated VMCS control if the vmcs12 page
is unreachable, i.e. it's possible for nested VM-Enter to succeed with a
"bad" vmcs12 page.
Link: https://patch.msgid.link/20251121223444.355422-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a parameter-less API for registering perf callbacks in anticipation of
introducing another x86-only parameter for handling mediated PMU PMIs.
No functional change intended.
Acked-by: Anup Patel <anup@brainfault.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Tested-by: Manali Shukla <manali.shukla@amd.com>
Link: https://patch.msgid.link/20251206001720.468579-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc5).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove useless assignment of soft_mode variable
The function __ftrace_event_enable_disable() sets "soft_mode" in one
of the branch paths but doesn't use it after that. Remove the setting
of that variable.
- Add a cond_resched() in ring_buffer_resize()
The resize function that allocates all the pages for the ring buffer
was causing a soft lockup on PREEMPT_NONE configs when allocating
large buffers on machines with many CPUs. Hopefully this is the last
cond_resched() needed to be added as PREEMPT_LAZY becomes the norm in
the future.
- Make ftrace_graph_ent depth field signed
The "depth" field of struct ftrace_graph_ent was converted from "int"
to "unsigned long" for alignment reasons to work with being embedded
in other structures. The conversion from a signed to unsigned caused
integrity checks to always pass as they were comparing "depth" to
less than zero. Make the field signed long.
- Add recursion protection to stack trace events
A infinite recursion was triggered by a stack trace event calling RCU
which internally called rcu_read_unlock_special(), which triggered an
event that was also doing stacktraces which cause it to trigger the
same RCU lock that called rcu_read_unlock_special() again.
Update the trace_test_and_set_recursion() to add a set of context
checks for events to use, and have the stack trace event use that for
recursion protection.
- Make the variable ftrace_dump_on_oops static
The cleanup of sysctl that moved all the updates to the files that
use them moved the reference of ftrace_dump_on_oops to where it is
used. It is no longer used outside of the trace.c file. Make it
static.
* tag 'trace-v6.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace: ftrace_dump_on_oops[] is not exported, make it static
tracing: Add recursion protection in kernel stack trace recording
ftrace: Make ftrace_graph_ent depth field signed
ring-buffer: Avoid softlockup in ring_buffer_resize() during memory free
tracing: Drop unneeded assignment to soft_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and wireless.
Current release - fix to a fix:
- net: do not write to msg_get_inq in callee
- arp: do not assume dev_hard_header() does not change skb->head
Current release - regressions:
- wifi: mac80211: don't iterate not running interfaces
- eth: mlx5: fix NULL pointer dereference in ioctl module EEPROM
Current release - new code bugs:
- eth: bnge: add AUXILIARY_BUS to Kconfig dependencies
Previous releases - regressions:
- eth: mlx5: dealloc forgotten PSP RX modify header
Previous releases - always broken:
- ping: fix ICMP out SNMP stats double-counting with ICMP sockets
- bonding: preserve NETIF_F_ALL_FOR_ALL across TSO updates
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress
- eth: bnxt: fix potential data corruption with HW GRO/LRO"
* tag 'net-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
arp: do not assume dev_hard_header() does not change skb->head
net: enetc: fix build warning when PAGE_SIZE is greater than 128K
atm: Fix dma_free_coherent() size
tools: ynl: don't install tests
net: do not write to msg_get_inq in callee
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
net: usb: pegasus: fix memory leak in update_eth_regs_async()
net: 3com: 3c59x: fix possible null dereference in vortex_probe1()
net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset
wifi: mac80211: collect station statistics earlier when disconnect
wifi: mac80211: restore non-chanctx injection behaviour
wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock
wifi: mac80211: don't iterate not running interfaces
wifi: mac80211_hwsim: fix typo in frequency notification
wifi: avoid kernel-infoleak from struct iw_point
net: airoha: Fix schedule while atomic in airoha_ppe_deinit()
selftests: netdevsim: add carrier state consistency test
net: netdevsim: fix inconsistent carrier state after link/unlink
selftests: drv-net: Bring back tool() to driver __init__s
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
...
|
|
These methods just read the values stored in the op pointers without
modifying them, so it is appropriate to use const ptrs here.
This allows us to avoid const -> mut pointer casts in Rust.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-3-dbd014005a0b@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In commit 9ce4aef9a5b1 ("drm/gpuvm: take GEM lock inside
drm_gpuvm_bo_obtain_prealloc()") we update
drm_gpuvm_bo_obtain_prealloc() to take locks internally, which means
that it's only usable in immediate mode.
In this commit, we notice that drm_gpuvm_bo_obtain() requires you to use
staged mode. This means that we now have one variant of obtain for each
mode you might use gpuvm in.
To reflect this information, we add a warning about using it in
immediate mode, and to make the distinction clearer we rename the method
with a _locked() suffix so that it's clear that it requires the caller
to take the locks.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-2-dbd014005a0b@google.com
[ Slightly reword commit message to refer to commit 9ce4aef9a5b1
("drm/gpuvm: take GEM lock inside drm_gpuvm_bo_obtain_prealloc()").
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The framer driver defines framer_pm_runtime_put() to return an int,
but that return value is never used. It also passes the return value
of pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3027916.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to commit 1b600da51073 ("PM: EM: Optimize em_cpu_energy() and remove
division"), the logic for energy consumption calculation has been modified.
The actual calculation of cost is 10 * power * max_frequency / frequency
instead of power * max_frequency / frequency.
Therefore, the comment for cost has been updated to reflect the correct
content.
Fixes: 1b600da51073 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Added Fixes: tag ]
Link: https://patch.msgid.link/20251230061534.816894-1-tianyaxiong@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull 6.19-devel branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently, whenever cfg80211_stop_iface() is called, the entire iface
is stopped. However, there could be a need in AP/P2P_GO mode, where
one would like to stop a single link in MLO operation instead of the
whole MLD interface.
Hence, introduce cfg80211_stop_link() to allow drivers to tear down
only a specified AP/P2P_GO link during MLO operation. Passing -1
preserves the existing behavior of stopping the whole interface. Make
cfg80211_stop_iface() call this function by passing -1 to keep the
default behavior the same, that is, to stop all links and use
cfg80211_stop_link() with the desired link_id for AP/P2P_GO mode, to
stop only that link.
This brings no behavioral change for single-link/non-MLO interfaces,
and enables drivers to stop an AP/P2P_GO link without disrupting other
links on the same interface.
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Link: https://patch.msgid.link/20251127-stop_link-v2-1-43745846c5fd@qti.qualcomm.com
[make cfg80211_stop_iface() inline]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add infrastructure for the HID driver to communicate with the asus-wmi
driver for handling special keys that require WMI communication.
This includes:
- Define ASUS_WMI_METHODID_NOTIF method ID in asus-wmi.h
- Implement asus_wmi_send_event() function to send events to asus-wmi
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fix kernel-doc warnings on struct intel_lb_component_ops:
Warning: include/drm/intel/intel_lb_mei_interface.h:55 Incorrect use of
kernel-doc format: * push_payload - Sends a payload to the
authentication firmware
And a bunch more. There isn't really support for documenting function
pointer struct members in kernel-doc, but at least reference the member
properly.
Fixes: 741eeabb7c78 ("mei: late_bind: add late binding component driver")
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260107160226.2381388-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Ingo reported PREEMPT_RT=y builds fail building
lib/test_context-analysis.c.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
The robot reported CONFIG_MODVERSION fails; which Nathan described as
so:
> Something about the context analysis makes genksyms fall over, running
> it manually on kernel/sched/core.i with '-w' to show warnings reveals
> many new "syntax error" instances. I don't see any warnings when using
> gendwarfksyms. Maybe it is context_lock_struct, as that is the first
> error I see in the list:
>
> include/linux/spinlock_types_raw.h:14: syntax error
Reported-by: kernel test robot <lkp@intel.com>
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202512222219.F6EkVNmQ-lkp@intel.com/
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/aV7fxXjaOBtHhI9X@elver.google.com
|
|
Add PCLKCAN ID for CANFD to both R9A09G077 and R9A09G087 SoCs.
This definition is required for describing CANFD device in DT.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251224165049.3384870-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Handle the error code from snd_pcm_buffer_access_lock() in
snd_pcm_runtime_buffer_set_silence() function.
Found by Alexandros Panagiotou <apanagio@redhat.com>
Fixes: 93a81ca06577 ("ALSA: pcm: Fix race of buffer access at PCM OSS layer")
Cc: stable@vger.kernel.org # 6.15
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20260107213642.332954-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The cgrp_ancestor_storage has two drawbacks:
- it's not guaranteed that the member immediately follows struct cgrp in
cgroup_root (root cgroup's ancestors[0] might thus point to a padding
and not in cgrp_ancestor_storage proper),
- this idiom raises warnings with -Wflex-array-member-not-at-end.
Instead of relying on the auxiliary member in cgroup_root, define the
0-th level ancestor inside struct cgroup (needed for static allocation
of cgrp_dfl_root), deeper cgroups would allocate flexible
_low_ancestors[]. Unionized alias through ancestors[] will
transparently join the two ranges.
The above change would still leave the flexible array at the end of
struct cgroup inside cgroup_root, so move cgrp also towards the end of
cgroup_root to resolve the -Wflex-array-member-not-at-end.
Link: https://lore.kernel.org/r/5fb74444-2fbb-476e-b1bf-3f3e279d0ced@embeddedor.com/
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Closes: https://lore.kernel.org/r/b3eb050d-9451-4b60-b06c-ace7dab57497@embeddedor.com/
Cc: David Laight <david.laight.linux@gmail.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
With IA-64 now gone, there are no users of the dma_mark_clean hook,
so we can retire it for good.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/c004927f01962726ff1dcf94d1b4efff84db805a.1767727673.git.robin.murphy@arm.com
|
|
Bring some drm-scheduler patches to Xe.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc5:
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f50067e6-243a-4ed8-9781-1e4e4fdebc8e@linux.intel.com
|
|
A bug was reported about an infinite recursion caused by tracing the rcu
events with the kernel stack trace trigger enabled. The stack trace code
called back into RCU which then called the stack trace again.
Expand the ftrace recursion protection to add a set of bits to protect
events from recursion. Each bit represents the context that the event is
in (normal, softirq, interrupt and NMI).
Have the stack trace code use the interrupt context to protect against
recursion.
Note, the bug showed an issue in both the RCU code as well as the tracing
stacktrace code. This only handles the tracing stack trace side of the
bug. The RCU fix will be handled separately.
Link: https://lore.kernel.org/all/20260102122807.7025fc87@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260105203141.515cd49f@gandalf.local.home
Reported-by: Yao Kai <yaokai34@huawei.com>
Tested-by: Yao Kai <yaokai34@huawei.com>
Fixes: 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The code has integrity checks to make sure that depth never goes below
zero. But the depth field has recently been converted to unsigned long
from "int" (for alignment reasons). As unsigned long can never be less
than zero, the integrity checks no longer work.
Convert depth to long from unsigned long to allow the integrity checks to
work again.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: pengdonglin <pengdonglin@xiaomi.com>
Link: https://patch.msgid.link/20260102143148.251c2e16@gandalf.local.home
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aS6kGi0maWBl-MjZ@stanley.mountain/
Fixes: f83ac7544fbf7 ("function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add USB_QUIRK_NO_BOS quirk flag to skip requesting the BOS descriptor
for devices that cannot handle it.
Add Elgato 4K X (0fd9:009b) to the quirk table. This device hangs when
the BOS descriptor is requested at SuperSpeed Plus (10Gbps).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220027
Cc: stable <stable@kernel.org>
Signed-off-by: Johannes Brüderl <johannes.bruederl@gmail.com>
Link: https://patch.msgid.link/20251207090220.14807-1-johannes.bruederl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
into clk-for-6.20
Merge the Kaanapali camera, display, GPU, and video clock controller
bindings through a topic branch, to allow making them available to the
DeviceTree branch as well.
|
|
Qualcomm GX(graphics) is a clock controller which has PLLs, clocks and
Power domains (GDSC), but the requirement from the SW driver is to use
the GDSC power domain from the clock controller to recover the GPU
firmware in case of any failure/hangs. The rest of the resources of the
clock controller are being used by the firmware of GPU. This module
exposes the GDSC power domains which helps the recovery of Graphics
subsystem.
Add bindings documentation for the Kaanapali Graphics Clock and Graphics
power domain Controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-7-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the video clock controller on Qualcomm
Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-6-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the compatible and the bindings for CAMCC support on Kaanapali
SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-5-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document device tree bindings for display clock controller for
Qualcomm Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-4-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-6.20
Merge the SM8750 camera clock controller binding through a topic branch,
in order to allow the defines to made availabe to the DeviceTree
branch as well.
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SM8750 platform. The camera clock controller is split between
camcc and cambist. The cambist controls the mclks of the camera clock
controller.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251202-sm8750_camcc-v1-2-b3f7ef6723f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
