| Age | Commit message (Collapse) | Author |
|---|
|
Convert the whole call sequence from mon_event_read() to resctrl_arch_rmid_read() to
pass resource independent struct rdt_domain_hdr instead of an L3 specific domain
structure to prepare for monitoring events in other resources.
This additional layer of indirection obscures which aspects of event counting depend
on a valid domain. Event initialization, support for assignable counters, and normal
event counting implicitly depend on a valid domain while summing of domains does not.
Split summing domains from the core event counting handling to make their respective
dependencies obvious.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Add mlx5_lag_query_bond_speed() to query the aggregated speed of
lag configurations with a bond device.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add port change event handling logic for MPESW LAG mode, ensuring
VFs are updated when the speed of LAG physical ports changes.
This triggers a speed update workflow when relevant port state changes
occur, enabling consistent and accurate reporting of VF bandwidth.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently, vports report only their parent's uplink speed, which in LAG
setups does not reflect the true aggregated bandwidth. This makes it
hard for upper-layer software to optimize load balancing decisions
based on accurate bandwidth information.
Fix the issue by calculating the possible maximum speed of a LAG as
the sum of speeds of all active uplinks that are part of the LAG.
Propagate this effective max speed to vports associated with the LAG
whenever a relevant event occurs, such as physical port link state
changes or LAG creation/modification.
With this change, upper-layer components receive accurate bandwidth
information corresponding to the active members of the LAG and can
make better load balancing decisions.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the max_tx_speed field to the query and modify_vport_state
structures.
Add the esw_vport_state_max_tx_speed capability bit, indicating
the firmware support modifying the max_tx_speed field via the
MODIFY_VPORT_STATE command.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery
waiting on kthreadd, which is attempting to reclaim memory by calling
nfs_release_folio(). The latter cannot make progress due to state
recovery being needed.
It seems that the only safe thing to do here is to kick off a writeback
of the folio, without waiting for completion, or else kicking off an
asynchronous commit.
Reported-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Fixes: 96780ca55e3c ("NFS: fix up nfs_release_folio() to try to release the page")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Directly increment the TSO features incurs a side effect: it will also
directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device,
which can cause issues such as the inability to enable the nocache copy
feature on the bonding driver.
The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby
preventing it from being cleared.
Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master")
Signed-off-by: Di Zhu <zhud@hygon.cn>
Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Borislav Petkov:
- Make sure clang inlines trivial local_irq_* helpers
* tag 'core_urgent_for_v6.19_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Always inline local_irq_{enable,disable}_exit_to_user()
|
|
Up until now, all monitoring events were associated with the L3 resource and it
made sense to use the L3 specific "struct rdt_mon_domain *" argument to functions
operating on domains.
Telemetry events will be tied to a new resource with its instances represented
by a new domain structure that, just like struct rdt_mon_domain, starts with
the generic struct rdt_domain_hdr.
Prepare to support domains belonging to different resources by changing the
calling convention of functions operating on domains. Pass the generic header
and use that to find the domain specific structure where needed.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
Every resctrl resource has a list of domain structures. struct rdt_ctrl_domain
and struct rdt_mon_domain both begin with struct rdt_domain_hdr with
rdt_domain_hdr::type used in validity checks before accessing the domain of
a particular type.
Add the resource id to struct rdt_domain_hdr in preparation for a new monitoring
domain structure that will be associated with a new monitoring resource. Improve
existing domain validity checks with a new helper domain_header_is_valid()
that checks both domain type and resource id. domain_header_is_valid() should
be used before every call to container_of() that accesses a domain structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
|
|
The __opt annotation was originally introduced specifically for
buffer/size argument pairs in bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr(), allowing the buffer pointer to be NULL while
still validating the size as a constant. The __nullable annotation
serves the same purpose but is more general and is already used
throughout the BPF subsystem for raw tracepoints, struct_ops, and other
kfuncs.
This patch unifies the two annotations by replacing __opt with
__nullable. The key change is in the verifier's
get_kfunc_ptr_arg_type() function, where mem/size pair detection is now
performed before the nullable check. This ensures that buffer/size
pairs are correctly classified as KF_ARG_PTR_TO_MEM_SIZE even when the
buffer is nullable, while adding an !arg_mem_size condition to the
nullable check prevents interference with mem/size pair handling.
When processing KF_ARG_PTR_TO_MEM_SIZE arguments, the verifier now uses
is_kfunc_arg_nullable() instead of the removed is_kfunc_arg_optional()
to determine whether to skip size validation for NULL buffers.
This is the first documentation added for the __nullable annotation,
which has been in use since it was introduced but was previously
undocumented.
No functional changes to verifier behavior - nullable buffer/size pairs
continue to work exactly as before.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102221513.1961781-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_map_memcg_enter() and bpf_map_memcg_exit() helpers to
reduce code duplication in memcg context management.
bpf_map_memcg_enter() gets the memcg from the map, sets it as active,
and returns both the previous and the now active memcg.
bpf_map_memcg_exit() restores the previous active memcg and releases the
reference obtained during enter.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102200230.25168-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Removed dead argument length for io_uring_validate_mmap_request()
- Use GFP_NOWAIT for overflow CQEs on legacy ring setups rather than
GFP_ATOMIC, which makes it play nicer with memcg limits
- Fix a potential circular locking issue with tctx node removal and
exec based cancelations
* tag 'io_uring-6.19-20260102' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/memmap: drop unused sz param in io_uring_validate_mmap_request()
io_uring/tctx: add separate lock for list of tctx's in ctx
io_uring: use GFP_NOWAIT for overflow CQEs on legacy rings
|
|
Now that KF_TRUSTED_ARGS is the default for all kfuncs, remove the
explicit KF_TRUSTED_ARGS flag from all kfunc definitions and remove the
flag itself.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260102180038.2708325-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add virtqueue_add_inbuf_cache_clean() for passing DMA_ATTR_CPU_CACHE_CLEAN
to virtqueue operations. This suppresses DMA debug cacheline overlap
warnings for buffers where proper cache management is ensured by the
caller.
Message-ID: <e50d38c974859e731e50bda7a0ee5691debf5bc4.1767601130.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
ctx->tcxt_list holds the tasks using this ring, and it's currently
protected by the normal ctx->uring_lock. However, this can cause a
circular locking issue, as reported by syzbot, where cancelations off
exec end up needing to remove an entry from this list:
======================================================
WARNING: possible circular locking dependency detected
syzkaller #0 Tainted: G L
------------------------------------------------------
syz.0.9999/12287 is trying to acquire lock:
ffff88805851c0a8 (&ctx->uring_lock){+.+.}-{4:4}, at: io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
but task is already holding lock:
ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: prepare_bprm_creds fs/exec.c:1360 [inline]
ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: bprm_execve+0xb9/0x1400 fs/exec.c:1733
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&sig->cred_guard_mutex){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
proc_pid_attr_write+0x547/0x630 fs/proc/base.c:2837
vfs_write+0x27e/0xb30 fs/read_write.c:684
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #1 (sb_writers#3){.+.+}-{0:0}:
percpu_down_read_internal include/linux/percpu-rwsem.h:53 [inline]
percpu_down_read_freezable include/linux/percpu-rwsem.h:83 [inline]
__sb_start_write include/linux/fs/super.h:19 [inline]
sb_start_write+0x4d/0x1c0 include/linux/fs/super.h:125
mnt_want_write+0x41/0x90 fs/namespace.c:499
open_last_lookups fs/namei.c:4529 [inline]
path_openat+0xadd/0x3dd0 fs/namei.c:4784
do_filp_open+0x1fa/0x410 fs/namei.c:4814
io_openat2+0x3e0/0x5c0 io_uring/openclose.c:143
__io_issue_sqe+0x181/0x4b0 io_uring/io_uring.c:1792
io_issue_sqe+0x165/0x1060 io_uring/io_uring.c:1815
io_queue_sqe io_uring/io_uring.c:2042 [inline]
io_submit_sqe io_uring/io_uring.c:2320 [inline]
io_submit_sqes+0xbf4/0x2140 io_uring/io_uring.c:2434
__do_sys_io_uring_enter io_uring/io_uring.c:3280 [inline]
__se_sys_io_uring_enter+0x2e0/0x2b60 io_uring/io_uring.c:3219
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&ctx->uring_lock){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x15a6/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x107/0x340 kernel/locking/lockdep.c:5868
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
io_uring_clean_tctx+0xd4/0x1a0 io_uring/tctx.c:195
io_uring_cancel_generic+0x6ca/0x7d0 io_uring/cancel.c:646
io_uring_task_cancel include/linux/io_uring.h:24 [inline]
begin_new_exec+0x10ed/0x2440 fs/exec.c:1131
load_elf_binary+0x9f8/0x2d70 fs/binfmt_elf.c:1010
search_binary_handler fs/exec.c:1669 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve+0x92e/0x1400 fs/exec.c:1753
do_execveat_common+0x510/0x6a0 fs/exec.c:1859
do_execve fs/exec.c:1933 [inline]
__do_sys_execve fs/exec.c:2009 [inline]
__se_sys_execve fs/exec.c:2004 [inline]
__x64_sys_execve+0x94/0xb0 fs/exec.c:2004
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Chain exists of:
&ctx->uring_lock --> sb_writers#3 --> &sig->cred_guard_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sig->cred_guard_mutex);
lock(sb_writers#3);
lock(&sig->cred_guard_mutex);
lock(&ctx->uring_lock);
*** DEADLOCK ***
1 lock held by syz.0.9999/12287:
#0: ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: prepare_bprm_creds fs/exec.c:1360 [inline]
#0: ffff88802db5a2e0 (&sig->cred_guard_mutex){+.+.}-{4:4}, at: bprm_execve+0xb9/0x1400 fs/exec.c:1733
stack backtrace:
CPU: 0 UID: 0 PID: 12287 Comm: syz.0.9999 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_circular_bug+0x2e2/0x300 kernel/locking/lockdep.c:2043
check_noncircular+0x12e/0x150 kernel/locking/lockdep.c:2175
check_prev_add kernel/locking/lockdep.c:3165 [inline]
check_prevs_add kernel/locking/lockdep.c:3284 [inline]
validate_chain kernel/locking/lockdep.c:3908 [inline]
__lock_acquire+0x15a6/0x2cf0 kernel/locking/lockdep.c:5237
lock_acquire+0x107/0x340 kernel/locking/lockdep.c:5868
__mutex_lock_common kernel/locking/mutex.c:614 [inline]
__mutex_lock+0x187/0x1350 kernel/locking/mutex.c:776
io_uring_del_tctx_node+0xf0/0x2c0 io_uring/tctx.c:179
io_uring_clean_tctx+0xd4/0x1a0 io_uring/tctx.c:195
io_uring_cancel_generic+0x6ca/0x7d0 io_uring/cancel.c:646
io_uring_task_cancel include/linux/io_uring.h:24 [inline]
begin_new_exec+0x10ed/0x2440 fs/exec.c:1131
load_elf_binary+0x9f8/0x2d70 fs/binfmt_elf.c:1010
search_binary_handler fs/exec.c:1669 [inline]
exec_binprm fs/exec.c:1701 [inline]
bprm_execve+0x92e/0x1400 fs/exec.c:1753
do_execveat_common+0x510/0x6a0 fs/exec.c:1859
do_execve fs/exec.c:1933 [inline]
__do_sys_execve fs/exec.c:2009 [inline]
__se_sys_execve fs/exec.c:2004 [inline]
__x64_sys_execve+0x94/0xb0 fs/exec.c:2004
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff3a8b8f749
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ff3a9a97038 EFLAGS: 00000246 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 00007ff3a8de5fa0 RCX: 00007ff3a8b8f749
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000400
RBP: 00007ff3a8c13f91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ff3a8de6038 R14: 00007ff3a8de5fa0 R15: 00007ff3a8f0fa28
</TASK>
Add a separate lock just for the tctx_list, tctx_lock. This can nest
under ->uring_lock, where necessary, and be used separately for list
manipulation. For the cancelation off exec side, this removes the
need to grab ->uring_lock, hence fixing the circular locking
dependency.
Reported-by: syzbot+b0e3b77ffaa8a4067ce5@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit creates an rcu_tasks_trace_expedite_current() function
that expedites the current (and possibly the next) RCU Tasks Trace
grace period.
If the current RCU Tasks Trace grace period is already waiting, that wait
will complete before the expediting takes effect. If there is no RCU
Tasks Trace grace period in flight, this function might well create one.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
When expressing RCU Tasks Trace in terms of SRCU-fast, it was
necessary to keep a nesting count and per-CPU srcu_ctr structure
pointer in the task_struct structure, which is slow to access.
But an alternative is to instead make rcu_read_lock_tasks_trace() and
rcu_read_unlock_tasks_trace(), which match the underlying SRCU-fast
semantics, avoiding the task_struct accesses.
When all callers have switched to the new API, the previous
rcu_read_lock_trace() and rcu_read_unlock_trace() APIs will be removed.
The rcu_read_{,un}lock_{,tasks_}trace() functions need to use smp_mb()
only if invoked where RCU is not watching, that is, from locations where
a call to rcu_is_watching() would return false. In architectures that
define the ARCH_WANTS_NO_INSTR Kconfig option, use of noinstr and friends
ensures that tracing happens only where RCU is watching, so those
architectures can dispense entirely with the read-side calls to smp_mb().
Other architectures include these read-side calls by default, but in many
installations there might be either larger than average tolerance for
risk, prohibition of removing tracing on a running system, or careful
review and approval of removing of tracing. Such installations can
build their kernels with CONFIG_TASKS_TRACE_RCU_NO_MB=y to avoid those
read-side calls to smp_mb(), thus accepting responsibility for run-time
removal of tracing from code regions that RCU is not watching.
Those wishing to disable read-side memory barriers for an entire
architecture can select this TASKS_TRACE_RCU_NO_MB Kconfig option,
hence the polarity.
[ paulmck: Apply Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Now that RCU Tasks Trace has been re-implemented in terms of SRCU-fast,
the ->trc_ipi_to_cpu, ->trc_blkd_cpu, ->trc_blkd_node, ->trc_holdout_list,
and ->trc_reader_special task_struct fields are no longer used.
In addition, the rcu_tasks_trace_qs(), rcu_tasks_trace_qs_blkd(),
exit_tasks_rcu_finish_trace(), and rcu_spawn_tasks_trace_kthread(),
show_rcu_tasks_trace_gp_kthread(), rcu_tasks_trace_get_gp_data(),
rcu_tasks_trace_torture_stats_print(), and get_rcu_tasks_trace_gp_kthread()
functions and all the other functions that they invoke are no longer used.
Also, the TRC_NEED_QS and TRC_NEED_QS_CHECKED CPP macros are no longer used.
Neither are the rcu_tasks_trace_lazy_ms and rcu_task_ipi_delay rcupdate
module parameters and the TASKS_TRACE_RCU_READ_MB Kconfig option.
This commit therefore removes all of them.
[ paulmck: Apply Alexei Starovoitov feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
This commit saves more than 500 lines of RCU code by re-implementing
RCU Tasks Trace in terms of SRCU-fast. Follow-up work will remove
more code that does not cause problems by its presence, but that is no
longer required.
This variant places smp_mb() in rcu_read_{,un}lock_trace(), and in the
same place that srcu_read_{,un}lock() would put them. These smp_mb()
calls will be removed on common-case architectures in a later commit.
In the meantime, it serves to enforce ordering between the underlying
srcu_read_{,un}lock_fast() markers and the intervening critical section,
even on architectures that permit attaching tracepoints on regions of
code not watched by RCU. Such architectures defeat SRCU-fast's use of
implicit single-instruction, interrupts-disabled, and atomic-operation
RCU read-side critical sections, which have no effect when RCU is not
watching. The aforementioned later commit will insert these smp_mb()
calls only on architectures that have not used noinstr to prevent
attaching tracepoints to code where RCU is not watching.
[ paulmck: Apply kernel test robot, Boqun Feng, and Zqiang feedback. ]
[ paulmck: Split out Tiny SRCU fixes per Andrii Nakryiko feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
When multiple small DMA_FROM_DEVICE or DMA_BIDIRECTIONAL buffers share a
cacheline, and DMA_API_DEBUG is enabled, we get this warning:
cacheline tracking EEXIST, overlapping mappings aren't supported.
This is because when one of the mappings is removed, while another one
is active, CPU might write into the buffer.
Add an attribute for the driver to promise not to do this, making the
overlapping safe, and suppressing the warning.
Message-ID: <2d5d091f9d84b68ea96abd545b365dd1d00bbf48.1767601130.git.mst@redhat.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When a structure contains a buffer that DMA writes to alongside fields
that the CPU writes to, cache line sharing between the DMA buffer and
CPU-written fields can cause data corruption on non-cache-coherent
platforms.
Add __dma_from_device_group_begin()/end() annotations to ensure proper
alignment to prevent this:
struct my_device {
spinlock_t lock1;
__dma_from_device_group_begin();
char dma_buffer1[16];
char dma_buffer2[16];
__dma_from_device_group_end();
spinlock_t lock2;
};
Message-ID: <19163086d5e4704c316f18f6da06bc1c72968904.1767601130.git.mst@redhat.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax: Area-51, x16, and 16X Aurora laptops support
- asus-armoury:
- Fix FA507R PPT data
- Add TDP data for more laptop models
- asus-nb-wmi: Asus Zenbook 14 display toggle key support
- dell-lis3lv02d: Dell Latitude 5400 support
- hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
- ibm_rtl: Fix EBDA signature search pointer arithmetic
- ideapad-laptop: Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
- intel/pmt:
- Fix kobject memory leak on init failure
- Use valid pointers on error handling path
- intel/vsec: Correct kernel doc comments
- mellanox: mlxbf-pmc: Fix event names
- msi-laptop: Add sysfs_remove_group()
- samsumg-galaxybook: Do not cast pointer to a shorter type
- think-lmi: WMI certificate thumbprint support for ThinkCenter
- uniwill: Tuxedo Book BA15 Gen10 support
* tag 'platform-drivers-x86-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: asus-armoury: add support for G835LW
platform/x86: asus-armoury: fix ppt data for FA507R
platform/x86/intel/pmt/discovery: use valid device pointer in dev_err_probe
platform/x86: hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
platform/x86: asus-armoury: add support for G615LR
platform/x86: asus-armoury: add support for FA608UM
platform/x86: asus-armoury: add support for GA403WR
platform/x86: asus-armoury: add support for GU605CR
platform/x86: ideapad-laptop: Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
platform/x86: samsung-galaxybook: Fix problematic pointer cast
platform/x86/intel/pmt: Fix kobject memory leak on init failure
platform/x86/intel/vsec: correct kernel-doc comments
platform/x86: ibm_rtl: fix EBDA signature search pointer arithmetic
platform/x86: msi-laptop: add missing sysfs_remove_group()
platform/x86: think-lmi: Add WMI certificate thumbprint support for ThinkCenter
platform/x86: dell-lis3lv02d: Add Latitude 5400
platform/mellanox: mlxbf-pmc: Remove trailing whitespaces from event names
platform/x86: asus-nb-wmi: Add keymap for display toggle
platform/x86/uniwill: Add TUXEDO Book BA15 Gen10
platform/x86: alienware-wmi-wmax: Add support for Alienware 16X Aurora
...
|
|
Pull VFIO fixes from Alex Williamson:
- Restrict ROM access to dword to resolve a regression introduced with
qword access seen on some Intel NICs. Update VGA region access to the
same given lack of precedent for 64-bit users (Kevin Tian)
- Fix missing .get_region_info_caps callback in the xe-vfio-pci variant
driver due to integration through the DRM tree (Michal Wajdeczko)
- Add aligned 64-bit access macros to tools/include/linux/types.h,
allowing removal of uapi/linux/type.h includes from various vfio
selftest, resolving redefinition warnings for integration with KVM
selftests (David Matlack)
- Fix error path memory leak in pds-vfio-pci variant driver (Zilin Guan)
- Fix error path use-after-free in xe-vfio-pci variant driver (Alper Ak)
* tag 'vfio-v6.19-rc4' of https://github.com/awilliam/linux-vfio:
vfio/xe: Fix use-after-free in xe_vfio_pci_alloc_file()
vfio/pds: Fix memory leak in pds_vfio_dirty_enable()
vfio: selftests: Drop <uapi/linux/types.h> includes
tools include: Add definitions for __aligned_{l,b}e64
vfio/xe: Add default handler for .get_region_info_caps
vfio/pci: Disable qword access to the VGA region
vfio/pci: Disable qword access to the PCI ROM bar
|
|
Now that the only user of the 'auto_queue' feature, (QRTR) has been
converted to manage the buffers on its own, drop the code related to it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251218-qrtr-fix-v2-2-c7499bfcfbe0@oss.qualcomm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"27 hotfixes. 12 are cc:stable, 18 are MM.
There's a patch series from Jiayuan Chen which fixes some
issues with KASAN and vmalloc. Apart from that it's the usual
shower of singletons - please see the respective changelogs
for details"
* tag 'mm-hotfixes-stable-2025-12-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (27 commits)
mm/ksm: fix pte_unmap_unlock of wrong address in break_ksm_pmd_entry
mm/page_owner: fix memory leak in page_owner_stack_fops->release()
mm/memremap: fix spurious large folio warning for FS-DAX
MAINTAINERS: notify the "Device Memory" community of memory hotplug changes
sparse: update MAINTAINERS info
mm/page_alloc: report 1 as zone_batchsize for !CONFIG_MMU
mm: consider non-anon swap cache folios in folio_expected_ref_count()
rust: maple_tree: rcu_read_lock() in destructor to silence lockdep
mm: memcg: fix unit conversion for K() macro in OOM log
mm: fixup pfnmap memory failure handling to use pgoff
tools/mm/page_owner_sort: fix timestamp comparison for stable sorting
selftests/mm: fix thread state check in uffd-unit-tests
kernel/kexec: fix IMA when allocation happens in CMA area
kernel/kexec: change the prototype of kimage_map_segment()
MAINTAINERS: add ABI headers to KHO and LIVE UPDATE
.mailmap: remove one of the entries for WangYuli
mm/damon/vaddr: fix missing pte_unmap_unlock in damos_va_migrate_pmd_entry()
MAINTAINERS: update one straggling entry for Bartosz Golaszewski
mm/page_alloc: change all pageblocks migrate type on coalescing
mm: leafops.h: correct kernel-doc function param. names
...
|
|
When I tried to clean up the driver a bit, Arnd noted:
> According to thinkwiki.de, the 3780i modem was only used in a
> couple of Thinkpad models that are now over 25 years old, using
> Pentium II processors, and they all have a physical RS232 port
> that can be used to connect an external modem instead.
>
> Maybe we can just retire this driver?
So instead of the clean up, drop the driver altogether.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/b8834e5d-fdde-4b1a-8757-288dddc507a9@app.fastmail.com/
Link: https://patch.msgid.link/20251124103952.995229-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
io_uring manages issued and pending IOPOLL read/write requests in a
singly linked list. One downside of that is that individual items
cannot easily be removed from that list, and as a result, io_uring
will only complete a completed request N in that list if 0..N-1 are
also complete. For homogenous IO this isn't necessarily an issue,
but if different devices are involved in polling in the same ring, or
if disparate IO from the same device is being polled for, this can
defer completion of some requests unnecessarily.
Move to a doubly linked list for iopoll completions instead, making it
possible to easily complete whatever requests that were polled done
successfully.
Co-developed-by: Fengnan Chang <fengnanchang@gmail.com>
Link: https://lore.kernel.org/io-uring/20251210085501.84261-1-changfengnan@bytedance.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When one iio device is a consumer of another, it is possible that
the ->info_exist_lock of both ends up being taken when reading the
value of the consumer device.
Since they currently belong to the same lockdep class (being
initialized in a single location with mutex_init()), that results in a
lockdep warning
CPU0
----
lock(&iio_dev_opaque->info_exist_lock);
lock(&iio_dev_opaque->info_exist_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by sensors/414:
#0: c31fd6dc (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x44/0x4e4
#1: c4f5a1c4 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x1c/0xac
#2: c2827548 (kn->active#34){.+.+}-{0:0}, at: kernfs_seq_start+0x30/0xac
#3: c1dd2b68 (&iio_dev_opaque->info_exist_lock){+.+.}-{3:3}, at: iio_read_channel_processed_scale+0x24/0xd8
stack backtrace:
CPU: 0 UID: 0 PID: 414 Comm: sensors Not tainted 6.17.11 #5 NONE
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x44/0x60
dump_stack_lvl from print_deadlock_bug+0x2b8/0x334
print_deadlock_bug from __lock_acquire+0x13a4/0x2ab0
__lock_acquire from lock_acquire+0xd0/0x2c0
lock_acquire from __mutex_lock+0xa0/0xe8c
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from iio_read_channel_raw+0x20/0x6c
iio_read_channel_raw from rescale_read_raw+0x128/0x1c4
rescale_read_raw from iio_channel_read+0xe4/0xf4
iio_channel_read from iio_read_channel_processed_scale+0x6c/0xd8
iio_read_channel_processed_scale from iio_hwmon_read_val+0x68/0xbc
iio_hwmon_read_val from dev_attr_show+0x18/0x48
dev_attr_show from sysfs_kf_seq_show+0x80/0x110
sysfs_kf_seq_show from seq_read_iter+0xdc/0x4e4
seq_read_iter from vfs_read+0x238/0x2e4
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Just as the mlock_key already has its own lockdep class, add a
lock_class_key for the info_exist mutex.
Note that this has in theory been a problem since before IIO first
left staging, but it only occurs when a chain of consumers is in use
and that is not often done.
Fixes: ac917a81117c ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.")
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Peter Rosin <peda@axentia.se>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Introduce DMA Rust helpers to avoid build errors when !CONFIG_HAS_DMA
- Remove unnecessary (and hence incorrect) endian conversion in the
Rust PCI driver sample code
- Fix memory leak in the unwind path of debugfs_change_name()
- Support non-const struct software_node pointers in
SOFTWARE_NODE_REFERENCE(), after introducing _Generic()
- Avoid NULL pointer dereference in the unwind path of
simple_xattrs_free()
* tag 'driver-core-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
fs/kernfs: null-ptr deref in simple_xattrs_free()
software node: Also support referencing non-constant software nodes
debugfs: Fix memleak in debugfs_change_name().
samples: rust: fix endianness issue in rust_driver_pci
rust: dma: add helpers for architectures without CONFIG_HAS_DMA
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.19:
UAPI Changes:
- panfrost: Add PANFROST_BO_SYNC ioctl
- panthor: Add PANTHOR_BO_SYNC ioctl
Core Changes:
- atomic: Add drm_device pointer to drm_private_obj
- bridge: Introduce drm_bridge_unplug, drm_bridge_enter, and
drm_bridge_exit
- dma-buf: Improve sg_table debugging
- dma-fence: Add new helpers, and use them when needed
- dp_mst: Avoid out-of-bounds access with VCPI==0
- gem: Reduce page table overhead with transparent huge pages
- panic: Report invalid panic modes
- sched: Add TODO entries
- ttm: Various cleanups
- vblank: Various refactoring and cleanups
- Kconfig cleanups
- Removed support for kdb
Driver Changes:
- amdxdna: Fix race conditions at suspend, Improve handling of zero
tail pointers, Fix cu_idx being overwritten during command setup
- ast: Support imported cursor buffers
-
- panthor: Enable timestamp propagation, Multiple improvements and
fixes to improve the overall robustness, notably of the scheduler.
- panels:
- panel-edp: Support for CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fix mm conflict]
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20251212-spectacular-agama-of-abracadabra-aaef32@penduick
|
|
virtio_features.h uses WARN_ON_ONCE and memset so it must
include linux/bug.h and linux/string.h
Message-ID: <579986aa9b8d023844990d2a0e267382f8ad85d5.1764873799.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio.h uses struct module, add a forward declaration to
make the header self-contained.
Message-ID: <9171b5cac60793eb59ab044c96ee038bf1363bee.1764873799.git.mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Storing the end time seconds as 'unsigned long' can lead to truncation
on 32-bit architectures if assigned from the 64-bit timespec64::tv_sec.
As the select() core uses timespec64 consistently, also use that in the
restart block.
This also allows the simplification of the accessors.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251223-restart-block-expiration-v2-1-8e33e5df7359@linutronix.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 2b938e3db335 ("vfio/pci: Enable iowrite64 and ioread64 for vfio
pci") enables qword access to the PCI bar resources. However certain
devices (e.g. Intel X710) are observed with problem upon qword accesses
to the rom bar, e.g. triggering PCI aer errors.
This is triggered by Qemu which caches the rom content by simply does a
pread() of the remaining size until it gets the full contents. The other
bars would only perform operations at the same access width as their
guest drivers.
Instead of trying to identify all broken devices, universally disable
qword access to the rom bar i.e. going back to the old way which worked
reliably for years.
Reported-by: Farrah Chen <farrah.chen@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220740
Fixes: 2b938e3db335 ("vfio/pci: Enable iowrite64 and ioread64 for vfio pci")
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Link: https://lore.kernel.org/r/20251218081650.555015-2-kevin.tian@intel.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Make arena related kfuncs any context safe by the following changes:
bpf_arena_alloc_pages() and bpf_arena_reserve_pages():
Replace the usage of the mutex with a rqspinlock for range tree and use
kmalloc_nolock() wherever needed. Use free_pages_nolock() to free pages
from any context.
apply_range_set/clear_cb() with apply_to_page_range() has already made
populating the vm_area in bpf_arena_alloc_pages() any context safe.
bpf_arena_free_pages(): defer the main logic to a workqueue if it is
called from a non-sleepable context.
specialize_kfunc() is used to replace the sleepable arena_free_pages()
with bpf_arena_free_pages_non_sleepable() when the verifier detects the
call is from a non-sleepable context.
In the non-sleepable case, arena_free_pages() queues the address and the
page count to be freed to a lock-less list of struct arena_free_spans
and raises an irq_work. The irq_work handler calls schedules_work() as
it is safe to be called from irq context. arena_free_worker() (the work
queue handler) iterates these spans and clears ptes, flushes tlb, zaps
pages, and calls __free_page().
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251222195022.431211-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, folio_expected_ref_count() only adds references for the swap
cache if the folio is anonymous. However, according to the comment above
the definition of PG_swapcache in enum pageflags, shmem folios can also
have PG_swapcache set. This patch makes sure references for the swap
cache are added if folio_test_swapcache(folio) is true.
This issue was found when trying to hot-unplug memory in a QEMU/KVM
virtual machine. When initiating hot-unplug when most of the guest memory
is allocated, hot-unplug hangs partway through removal due to migration
failures. The following message would be printed several times, and would
be printed again about every five seconds:
[ 49.641309] migrating pfn b12f25 failed ret:7
[ 49.641310] page: refcount:2 mapcount:0 mapping:0000000033bd8fe2 index:0x7f404d925 pfn:0xb12f25
[ 49.641311] aops:swap_aops
[ 49.641313] flags: 0x300000000030508(uptodate|active|owner_priv_1|reclaim|swapbacked|node=0|zone=3)
[ 49.641314] raw: 0300000000030508 ffffed312c4bc908 ffffed312c4bc9c8 0000000000000000
[ 49.641315] raw: 00000007f404d925 00000000000c823b 00000002ffffffff 0000000000000000
[ 49.641315] page dumped because: migration failure
When debugging this, I found that these migration failures were due to
__migrate_folio() returning -EAGAIN for a small set of folios because the
expected reference count it calculates via folio_expected_ref_count() is
one less than the actual reference count of the folios. Furthermore, all
of the affected folios were not anonymous, but had the PG_swapcache flag
set, inspiring this patch. After applying this patch, the memory
hot-unplug behaves as expected.
I tested this on a machine running Ubuntu 24.04 with kernel version
6.8.0-90-generic and 64GB of memory. The guest VM is managed by libvirt
and runs Ubuntu 24.04 with kernel version 6.18 (though the head of the
mm-unstable branch as a Dec 16, 2025 was also tested and behaves the same)
and 48GB of memory. The libvirt XML definition for the VM can be found at
[1]. CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is set in the guest
kernel so the hot-pluggable memory is automatically onlined.
Below are the steps to reproduce this behavior:
1) Define and start and virtual machine
host$ virsh -c qemu:///system define ./test_vm.xml # test_vm.xml from [1]
host$ virsh -c qemu:///system start test_vm
2) Setup swap in the guest
guest$ sudo fallocate -l 32G /swapfile
guest$ sudo chmod 0600 /swapfile
guest$ sudo mkswap /swapfile
guest$ sudo swapon /swapfile
3) Use alloc_data [2] to allocate most of the remaining guest memory
guest$ ./alloc_data 45
4) In a separate guest terminal, monitor the amount of used memory
guest$ watch -n1 free -h
5) When alloc_data has finished allocating, initiate the memory
hot-unplug using the provided xml file [3]
host$ virsh -c qemu:///system detach-device test_vm ./remove.xml --live
After initiating the memory hot-unplug, you should see the amount of
available memory in the guest decrease, and the amount of used swap data
increase. If everything works as expected, when all of the memory is
unplugged, there should be around 8.5-9GB of data in swap. If the
unplugging is unsuccessful, the amount of used swap data will settle below
that. If that happens, you should be able to see log messages in dmesg
similar to the one posted above.
Link: https://lkml.kernel.org/r/20251216200727.2360228-1-bijan311@gmail.com
Link: https://github.com/BijanT/linux_patch_files/blob/main/test_vm.xml [1]
Link: https://github.com/BijanT/linux_patch_files/blob/main/alloc_data.c [2]
Link: https://github.com/BijanT/linux_patch_files/blob/main/remove.xml [3]
Fixes: 86ebd50224c0 ("mm: add folio_expected_ref_count() for reference count calculation")
Signed-off-by: Bijan Tabatabai <bijan311@gmail.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shivank Garg <shivankg@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The memory failure handling implementation for the PFNMAP memory with no
struct pages is faulty. The VA of the mapping is determined based on the
the PFN. It should instead be based on the file mapping offset.
At the occurrence of poison, the memory_failure_pfn is triggered on the
poisoned PFN. Introduce a callback function that allows mm to translate
the PFN to the corresponding file page offset. The kernel module using
the registration API must implement the callback function and provide the
translation. The translated value is then used to determine the VA
information and sending the SIGBUS to the usermode process mapped to the
poisoned PFN.
The callback is also useful for the driver to be notified of the poisoned
PFN, which may then track it.
Link: https://lkml.kernel.org/r/20251211070603.338701-2-ankita@nvidia.com
Fixes: 2ec41967189c ("mm: handle poisoning of pfn without struct pages")
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Matthew R. Ochs <mochs@nvidia.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Neo Jia <cjia@nvidia.com>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kexec segment index will be required to extract the corresponding
information for that segment in kimage_map_segment(). Additionally,
kexec_segment already holds the kexec relocation destination address and
size. Therefore, the prototype of kimage_map_segment() can be changed.
Link: https://lkml.kernel.org/r/20251216014852.8737-1-piliu@redhat.com
Fixes: 07d24902977e ("kexec: enable CMA based contiguous allocation")
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Steven Chen <chenste@linux.microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Modify the kernel-doc function parameter names to prevent kernel-doc
warnings:
Warning: include/linux/leafops.h:135 function parameter 'entry' not
described in 'leafent_type'
Warning: include/linux/leafops.h:540 function parameter 'pte' not
described in 'pte_is_uffd_marker'
Link: https://lkml.kernel.org/r/20251214201517.2187051-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A KASAN tag mismatch, possibly causing a kernel panic, can be observed
on systems with a tag-based KASAN enabled and with multiple NUMA nodes.
It was reported on arm64 and reproduced on x86. It can be explained in
the following points:
1. There can be more than one virtual memory chunk.
2. Chunk's base address has a tag.
3. The base address points at the first chunk and thus inherits
the tag of the first chunk.
4. The subsequent chunks will be accessed with the tag from the
first chunk.
5. Thus, the subsequent chunks need to have their tag set to
match that of the first chunk.
Refactor code by reusing __kasan_unpoison_vmalloc in a new helper in
preparation for the actual fix.
Link: https://lkml.kernel.org/r/eb61d93b907e262eefcaa130261a08bcb6c5ce51.1764874575.git.m.wieczorretman@pm.me
Fixes: 1d96320f8d53 ("kasan, vmalloc: add vmalloc tagging for SW_TAGS")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "kasan: vmalloc: Fixes for the percpu allocator and
vrealloc", v3.
Patches fix two issues related to KASAN and vmalloc.
The first one, a KASAN tag mismatch, possibly resulting in a kernel panic,
can be observed on systems with a tag-based KASAN enabled and with
multiple NUMA nodes. Initially it was only noticed on x86 [1] but later a
similar issue was also reported on arm64 [2].
Specifically the problem is related to how vm_structs interact with
pcpu_chunks - both when they are allocated, assigned and when pcpu_chunk
addresses are derived.
When vm_structs are allocated they are unpoisoned, each with a different
random tag, if vmalloc support is enabled along the KASAN mode. Later
when first pcpu chunk is allocated it gets its 'base_addr' field set to
the first allocated vm_struct. With that it inherits that vm_struct's
tag.
When pcpu_chunk addresses are later derived (by pcpu_chunk_addr(), for
example in pcpu_alloc_noprof()) the base_addr field is used and offsets
are added to it. If the initial conditions are satisfied then some of the
offsets will point into memory allocated with a different vm_struct. So
while the lower bits will get accurately derived the tag bits in the top
of the pointer won't match the shadow memory contents.
The solution (proposed at v2 of the x86 KASAN series [3]) is to unpoison
the vm_structs with the same tag when allocating them for the per cpu
allocator (in pcpu_get_vm_areas()).
The second one reported by syzkaller [4] is related to vrealloc and
happens because of random tag generation when unpoisoning memory without
allocating new pages. This breaks shadow memory tracking and needs to
reuse the existing tag instead of generating a new one. At the same time
an inconsistency in used flags is corrected.
This patch (of 3):
Syzkaller reported a memory out-of-bounds bug [4]. This patch fixes two
issues:
1. In vrealloc the KASAN_VMALLOC_VM_ALLOC flag is missing when
unpoisoning the extended region. This flag is required to correctly
associate the allocation with KASAN's vmalloc tracking.
Note: In contrast, vzalloc (via __vmalloc_node_range_noprof)
explicitly sets KASAN_VMALLOC_VM_ALLOC and calls
kasan_unpoison_vmalloc() with it. vrealloc must behave consistently --
especially when reusing existing vmalloc regions -- to ensure KASAN can
track allocations correctly.
2. When vrealloc reuses an existing vmalloc region (without allocating
new pages) KASAN generates a new tag, which breaks tag-based memory
access tracking.
Introduce KASAN_VMALLOC_KEEP_TAG, a new KASAN flag that allows reusing the
tag already attached to the pointer, ensuring consistent tag behavior
during reallocation.
Pass KASAN_VMALLOC_KEEP_TAG and KASAN_VMALLOC_VM_ALLOC to the
kasan_unpoison_vmalloc inside vrealloc_node_align_noprof().
Link: https://lkml.kernel.org/r/cover.1765978969.git.m.wieczorretman@pm.me
Link: https://lkml.kernel.org/r/38dece0a4074c43e48150d1e242f8242c73bf1a5.1764874575.git.m.wieczorretman@pm.me
Link: https://lore.kernel.org/all/e7e04692866d02e6d3b32bb43b998e5d17092ba4.1738686764.git.maciej.wieczor-retman@intel.com/ [1]
Link: https://lore.kernel.org/all/aMUrW1Znp1GEj7St@MiWiFi-R3L-srv/ [2]
Link: https://lore.kernel.org/all/CAPAsAGxDRv_uFeMYu9TwhBVWHCCtkSxoWY4xmFB_vowMbi8raw@mail.gmail.com/ [3]
Link: https://syzkaller.appspot.com/bug?extid=997752115a851cb0cf36 [4]
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Co-developed-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reported-by: syzbot+997752115a851cb0cf36@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e243a2.050a0220.1696c6.007d.GAE@google.com/T/
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
WARNING: include/linux/genalloc.h:52 function parameter 'start_addr' not described in 'genpool_algo_t'
Fixes: 52fbf1134d47 ("lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lkml.kernel.org/r/20251127130624.563597e3@canb.auug.org.au
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update phy driver to enable SS combo phy for this SoC. New registers'
definitions, phy ops (init/exit), and dedicated phy driver data
structure are added for SS combo phy. Add these changes in the driver
to support SS combo phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-7-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Enable UTMI+ phy support for this SoC which is very similar to what
the existing Exynos850 supports.
Add required change in phy driver to support HS phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-3-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Various hardware, like the Type-C PHY or the Thunderbolt/USB4 NHI,
present on Apple SoCs need machine-specific tunables passed from our
bootloader m1n1 to the device tree. Add generic helpers so that we
don't have to duplicate this across multiple drivers.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-1-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The PHY core defines phy_pm_runtime_put() to return an int, but that
return value is never used. It also passes the return value of
pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void. Also drop the redundant
pm_runtime_enabled() call from there.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2556645.jE0xQCEvom@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
configfs_group_operations
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
65061 20968 256 86285 1510d drivers/usb/gadget/configfs.o
After:
=====
text data bss dec hex filename
66181 19848 256 86285 1510d drivers/usb/gadget/configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/49cec1cb84425f854de80b6d69b53a5a3cda8189.1766164523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
