| Age | Commit message (Collapse) | Author |
|---|
|
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pinctrl_bind_pins() is only used by driver core (as it should). Move it
out of the public header into base.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
The GCE in MT8196 is placed in MMINFRA and requires all addresses
in GCE instructions for DRAM transactions to be IOVA.
Due to MMIO, if the GCE needs to access a hardware register at
0x1000_0000, but the SMMU is also mapping a DRAM block at 0x1000_0000,
the MMINFRA will not know whether to write to the hardware register or
the DRAM.
To solve this, MMINFRA treats addresses greater than 2G as data paths
and those less than 2G as config paths because the DRAM start address
is currently at 2G (0x8000_0000). On the data path, MMINFRA remaps
DRAM addresses by subtracting 2G, allowing SMMU to map DRAM addresses
less than 2G.
For example, if the DRAM start address 0x8000_0000 is mapped to
IOVA=0x0, when GCE accesses IOVA=0x0, it must add a 2G offset to
the address in the GCE instruction. MMINFRA will then see it as a
data path (IOVA >= 2G) and subtract 2G, allowing GCE to access IOVA=0x0.
Since the MMINFRA remap subtracting 2G is done in hardware and cannot
be configured by software, the address of DRAM in GCE instruction must
always add 2G to ensure proper access. After that, the shift functions
do more than just shift addresses, so the APIs were renamed to
cmdq_convert_gce_addr() and cmdq_revert_gce_addr().
This 2G adjustment is referred to as mminfra_offset in the CMDQ driver.
CMDQ helper can get the mminfra_offset from the cmdq_mbox_priv of
cmdq_pkt and add the mminfra_offset to the DRAM address in GCE
instructions.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add the cmdq_mbox_priv structure to store the private data of GCE,
such as the shift bits of the physical address. Then, include the
cmdq_mbox_priv structure within the cmdq_pkt structure.
This allows CMDQ users to utilize the private data in cmdq_pkt to
generate GCE instructions when needed. Additionally, having
cmdq_mbox_priv makes it easier to expand and reference other GCE
private data in the future.
Add cmdq_get_mbox_priv() for CMDQ users to get all the private data
into the cmdq_mbox_priv of the cmdq_pkt.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids for 6.19-rc6
Included in here are:
- new usb-serial device ids
- dwc3-apple driver fixes to get things working properly on that
hardware platform
- ohci/uhci platfrom driver module soft-deps with ehci to remove a
runtime warning that sometimes shows up on some platforms.
- quirk for broken devices that can not handle reading the BOS
descriptor from them without going crazy.
- usb-serial driver fixes
- xhci driver fixes
- usb gadget driver fixes
All of these except for the last xhci fix has been in linux-next for a
while. The xhci fix has been reported by others to solve the issue for
them, so should be ok"
* tag 'usb-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: sideband: don't dereference freed ring when removing sideband endpoint
usb: gadget: uvc: retry vb2_reqbufs() with vb_vmalloc_memops if use_sg fail
usb: gadget: uvc: return error from uvcg_queue_init()
usb: gadget: uvc: fix interval_duration calculation
usb: gadget: uvc: fix req_payload_size calculation
usb: dwc3: apple: Ignore USB role switches to the active role
usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs
USB: OHCI/UHCI: Add soft dependencies on ehci_platform
usb: dwc3: apple: Set USB2 PHY mode before dwc3 init
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor
dt-bindings: usb: qcom,dwc3: Correct MSM8994 interrupts
dt-bindings: usb: qcom,dwc3: Correct IPQ5018 interrupts
tcpm: allow looking for role_sw device in the main node
usb: dwc3: Check for USB4 IP_NAME
|
|
Add a function to put a co-processor into the lowest possible power
state from which recovery usually isn't possible without a full SoC
reset. This is required for the USB4/Thunderbolt co-processors which
can be restarted since the entire USB4 root complex can be completely
reset independently of the rest of the SoC.
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260117-apple-rtkit-poweroff-v2-1-b882a180e44d@kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Add mtk-vcp-mailbox driver to support the communication with
VCP remote microprocessor.
Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc deadline scheduler fixes, mainly for a new category of bugs that
were discovered and fixed recently:
- Fix a race condition in the DL server
- Fix a DL server bug which can result in incorrectly going idle when
there's work available
- Fix DL server bug which triggers a WARN() due to broken
get_prio_dl() logic and subsequent misbehavior
- Fix double update_rq_clock() calls
- Fix setscheduler() assumption about static priorities
- Make sure balancing callbacks are always called
- Plus a handful of preparatory commits for the fixes"
* tag 'sched-urgent-2026-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Use ENQUEUE_MOVE to allow priority change
sched: Deadline has dynamic priority
sched: Audit MOVE vs balance_callbacks
sched: Fold rq-pin swizzle into __balance_callbacks()
sched/deadline: Avoid double update_rq_clock()
sched/deadline: Ensure get_prio_dl() is up-to-date
sched/deadline: Fix server stopping with runnable tasks
sched: Provide idle_rq() helper
sched/deadline: Fix potential race in dl_add_task_root_domain()
sched/deadline: Remove unnecessary comment in dl_add_task_root_domain()
|
|
* for-7.0/blk-pvec:
types: move phys_vec definition to common header
nvme-pci: Use size_t for length fields to handle larger sizes
|
|
Many watchdog API functions do not modify the watchdog_device nor
device. Mark their arguments as const to reflect this and improve
const-correctness of the API.
No functional change intended.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The recent changes to get_unaligned() resulted in a new sparse warning:
net/rds/ib_cm.c:96:35: sparse: sparse: incorrect type in argument 1 (different modifiers) @@ expected void * @@ got restricted __be64 const * @@
net/rds/ib_cm.c:96:35: sparse: expected void *
net/rds/ib_cm.c:96:35: sparse: got restricted __be64 const *
The updated get_unaligned_t() uses __unqual_scalar_typeof() to get an
unqualified type. This works correctly for the compilers, but fails for
sparse when the data type is __be64 (or any other __beNN variant).
On sparse runs (C=[12]) __beNN types are annotated with
__attribute__((bitwise)).
That annotation allows sparse to detect incompatible operations on __beNN
variables, but it also prevents sparse from evaluating the _Generic() in
__unqual_scalar_typeof() and map __beNN to a unqualified scalar type, so it
ends up with the default, i.e. the original qualified type of a 'const
__beNN' pointer. That then ends up as the first pointer argument to
builtin_memcpy(), which obviously causes the above sparse warnings.
The sparse git tree supports typeof_unqual() now, which allows to use it
instead of the _Generic() based __unqual_scalar_typeof(). With that sparse
correctly evaluates the unqualified type and keeps the __beNN logic intact.
The downside is that this requires a top of tree sparse build and an old
sparse version will emit a metric ton of incomprehensible error messages
before it dies with a segfault.
Therefore implement a sanity check which validates that the checker is
available and capable of handling typeof_unqual(). Emit a warning if not so
the user can take informed action.
[ tglx: Move the evaluation of USE_TYPEOF_UNQUAL to compiler_types.h so it is
set before use and implement the sanity checker ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/87ecnp2zh3.ffs@tglx
Closes: https://lore.kernel.org/oe-kbuild-all/202601150001.sKSN644a-lkp@intel.com/
|
|
This commit adds a new variant of fw_iso_context_create() that allows
specifying the size of the isochronous context header storage at
allocation time.
Link: https://lore.kernel.org/r/20260117142823.440811-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
For single-channel isochronous contexts, the header storage size is
hard-coded to PAGE_SIZE. which is inconvenient for protocol
implementations requiring more space.
This commit refactors the code to obtain the header storage size outside
the 1394 OHCI driver.
Link: https://lore.kernel.org/r/20260117142823.440811-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This is minor code refactoring to add a flag member to the isochronous
context structure. At present, it is used only for the option to drop
packets when the context header overflows.
Link: https://lore.kernel.org/r/20260117142823.440811-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
The fw_iso_callback union was added by a commit ebe4560ed5c ("firewire:
Remove function callback casts") to remove function pointer cast.
That change affected the cdev layer of the core code, but it is more
convenient for fw_iso_context_create() to accept the union directly.
This commit renames and changes the existing function to take the union
argument, and add static inline wrapper functions as variants.
Link: https://lore.kernel.org/r/20260117142823.440811-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Introduce __counted_by_ptr(), which works like __counted_by(), but for
pointer struct members.
struct foo {
int a, b, c;
char *buffer __counted_by_ptr(bytes);
short nr_bars;
struct bar *bars __counted_by_ptr(nr_bars);
size_t bytes;
};
Because "counted_by" can only be applied to pointer members in very
recent compiler versions, its application ends up needing to be distinct
from flexibe array "counted_by" annotations, hence a separate macro.
This is a reworking of Kees' previous patch [1].
Link: https://lore.kernel.org/all/20251020220118.1226740-1-kees@kernel.org/ [1]
Co-developed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Bill Wendling <morbo@google.com>
Link: https://patch.msgid.link/20260116005838.2419118-1-morbo@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
MISC protocol supports getting system log regarding system sleep latency,
wakeup interrupt and etc. Add the API for user to retrieve the information
from SM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Currently, F2FS requires the packed_ssa feature to be enabled when
utilizing non-4KB block sizes (e.g., 16KB). This restriction limits
the flexibility of filesystem formatting options.
This patch allows F2FS to support non-4KB block sizes even when the
packed_ssa feature is disabled. It adjusts the SSA calculation logic to
correctly handle summary entries in larger blocks without the packed
layout.
Cc: stable@kernel.org
Fixes: 7ee8bc3942f2 ("f2fs: revert summary entry count from 2048 to 512 in 16kb block support")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Add a pci_free_irq_vectors() stub to fix a build issue when
CONFIG_PCI is not set (Boqun Feng)
* tag 'pci-v6.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Provide pci_free_irq_vectors() stub
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error path memory leak in the energy model management
code, fix a kerneldoc comment in it, and fix and revamp the energy
model YNL specification added recently along with the new energy model
management netlink interface (that received feedback after being
added):
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)"
* tag 'pm-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
|
|
The irq_chip_pm_put() return value is only used in __irq_do_set_handler()
to trigger a WARN_ON() if it is negative, but doing so is not useful
because irq_chip_pm_put() simply passes the pm_runtime_put() return value
to its callers.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
For this reason, modify irq_chip_pm_put() to discard the pm_runtime_put()
return value, change its return type to void, and drop the WARN_ON()
around the irq_chip_pm_put() invocation from __irq_do_set_handler().
Also update the irq_chip_pm_put() kerneldoc comment to be more accurate.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/5075294.31r3eYUQgx@rafael.j.wysocki
|
|
Now since all .assert_callback() implementations have been removed from the
controller drivers, drop the .assert_callback callback from pci.h.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-14-9d26da3ce903@oss.qualcomm.com
|
|
To fix bridge resource allocation issues when powering PCI bridges with the
pwrctrl driver, introduce APIs to explicitly power on and off all related
devices simultaneously.
Previously, the individual pwrctrl drivers powered on/off the PCI devices
autonomously, without any control from the controller drivers. But to
enforce ordering with respect to powering on the devices, these APIs will
power on/off all the devices at the same time.
The pci_pwrctrl_power_on_devices() API recursively scans the PCI child
nodes, makes sure that pwrctrl drivers are bound to devices, and calls
their power_on() callbacks. If any pwrctrl driver is not bound, it will
return -EPROBE_DEFER.
Similarly, pci_pwrctrl_power_off_devices() API powers off devices
recursively via their power_off() callbacks.
These APIs are expected to be called during the controller probe and
suspend/resume time to power on/off the devices. But before calling these
APIs, the pwrctrl devices should be created using the
pci_pwrctrl_{create/destroy}_devices() APIs.
Co-developed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-11-9d26da3ce903@oss.qualcomm.com
|
|
Previously, the PCI core created pwrctrl devices during pci_scan_device()
on its own and then skipped enumeration of those devices, hoping the
pwrctrl driver would power them on and trigger a bus rescan.
This approach works for endpoint devices directly connected to Root Ports,
but it fails for PCIe switches acting as bus extenders. When the switch
requires pwrctrl support and the pwrctrl driver is not available during
the pwrctrl device creation, its enumeration will be skipped during the
initial PCI bus scan.
This premature scan leads the PCI core to allocate resources (bridge
windows, bus numbers) for the upstream bridge based on available downstream
buses at scan time. For non-hotplug capable bridges, PCI core typically
allocates resources based on the number of buses available during the
initial bus scan, which happens to be just one if the switch is not powered
on and enumerated at that time. When the switch gets enumerated later on,
it will fail due to the lack of upstream resources.
As a result, a PCIe switch powered on by the pwrctrl driver cannot be
reliably enumerated currently. Either the switch has to be enabled in the
bootloader or the switch pwrctrl driver has to be loaded during the pwrctrl
device creation time to work around these issues.
Introduce new APIs to explicitly create and destroy pwrctrl devices from
controller drivers by recursively scanning the PCI child nodes of the
controller. These APIs allow creating pwrctrl devices based on the original
criteria and are intended to be called during controller probe and removal.
These APIs, together with the upcoming APIs for power on/off will allow the
controller drivers to power on all the devices before starting the initial
bus scan, thereby solving the resource allocation issue.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: splitted the patch, cleaned up the code, and rewrote description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-10-9d26da3ce903@oss.qualcomm.com
|
|
To allow the pwrctrl core to control the power on/off sequences of the
pwrctrl drivers, add the 'struct pci_pwrctrl::power_{on/off}' callbacks and
populate them in the respective pwrctrl drivers.
The pwrctrl drivers still power on the resources on their own now. So there
is no functional change.
Co-developed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-9-9d26da3ce903@oss.qualcomm.com
|
|
Insert Soft Reserved memory into a dedicated soft_reserve_resource tree
instead of the iomem_resource tree at boot. Delay publishing these ranges
into the iomem hierarchy until ownership is resolved and the HMEM path
is ready to consume them.
Publishing Soft Reserved ranges into iomem too early conflicts with CXL
hotplug and prevents region assembly when those ranges overlap CXL
windows.
Follow up patches will reinsert Soft Reserved ranges into iomem after CXL
window publication is complete and HMEM is ready to claim the memory. This
provides a cleaner handoff between EFI-defined memory ranges and CXL
resource management without trimming or deleting resources later.
In the meantime "Soft Reserved" resources will no longer appear in
/proc/iomem, only their results. I.e. with "memmap=4G%4G+0xefffffff"
Before:
100000000-1ffffffff : Soft Reserved
100000000-1ffffffff : dax1.0
100000000-1ffffffff : System RAM (kmem)
After:
100000000-1ffffffff : dax1.0
100000000-1ffffffff : System RAM (kmem)
The expectation is that this does not lead to a user visible regression
because the dax1.0 device is created in both instances.
Co-developed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
[Smita: incorporate feedback from x86 maintainer review]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://patch.msgid.link/20251120031925.87762-2-Smita.KoralahalliChannabasappa@amd.com
[djbw: cleanups and clarifications]
Link: https://lore.kernel.org/69443f707b025_1cee10022@dwillia2-mobl4.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
attribute_container_register() has always returned 0 since its
introduction in commit 06ff5a987e ("Add attribute container to generic
device model") in the historical Linux tree [1]. Convert the return type
to void and update all callers.
This removes dead code where callers checked for errors that could never
occur.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1]
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://patch.msgid.link/20251220-dev-attribute-container-linux-scsi-v1-1-d58fcd03bf21@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When rtsx_pci suspends, the card reader hardware powers off but the sdmmc
driver's prev_power_state remains as MMC_POWER_ON. This causes sd_power_on
to skip reinitialization on the next I/O request, leading to DMA transfer
timeouts and errors on resume 20% of the time.
Add a power_off slot callback so the PCR can notify the sdmmc driver
during suspend. The sdmmc driver resets prev_power_state, and sd_request
checks this to reinitialize the card before the next I/O.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260105060236.400366-2-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using MMC_CAP_AGGRESSIVE_PM on RTS525A card readers causes game
performance issues when the card reader comes back from idle into active
use. This can be observed in Hades II when loading new sections of the
game or menu after the card reader puts itself into idle, and presents
as a 1-2 second hang.
Add EXTRA_CAPS_NO_AGGRESSIVE_PM quirk to allow cardreader drivers to
opt-out of aggressive PM, and set it for RTS525A.
Closes: https://lore.kernel.org/linux-mmc/ff9a7c20-f465-4afa-bf29-708d4a52974a@linux.dev/
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260103204226.71752-1-matthew.schwartz@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the function parameter parts of the struct member descriptions
to prevent kernel-doc warnings:
Warning: include/linux/eeprom_93cx6.h:64 struct member 'register_read'
not described in 'eeprom_93cx6'
Warning: ../include/linux/eeprom_93cx6.h:64 struct member 'register_write'
not described in 'eeprom_93cx6'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251214202739.2216904-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct typos in 3 struct member descriptions to eliminate all
kernel-doc warnings in comedi_8254.h:
Warning: include/linux/comedi/comedi_8254.h:112 struct member 'next_div'
not described in 'comedi_8254'
Warning: include/linux/comedi/comedi_8254.h:112 struct member 'clock_src'
not described in 'comedi_8254'
Warning: include/linux/comedi/comedi_8254.h:112 struct member 'gate_src'
not described in 'comedi_8254'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251214202727.2215461-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This script
#!/usr/bin/bash
echo 0 > /proc/sys/kernel/randomize_va_space
echo 'void main(void) {}' > TEST.c
# -fcf-protection to ensure that the 1st endbr32 insn can't be emulated
gcc -m32 -fcf-protection=branch TEST.c -o test
bpftrace -e 'uprobe:./test:main {}' -c ./test
"hangs", the probed ./test task enters an endless loop.
The problem is that with randomize_va_space == 0
get_unmapped_area(TASK_SIZE - PAGE_SIZE) called by xol_add_vma() can not
just return the "addr == TASK_SIZE - PAGE_SIZE" hint, this addr is used
by the stack vma.
arch_get_unmapped_area_topdown() doesn't take TIF_ADDR32 into account and
in_32bit_syscall() is false, this leads to info.high_limit > TASK_SIZE.
vm_unmapped_area() happily returns the high address > TASK_SIZE and then
get_unmapped_area() returns -ENOMEM after the "if (addr > TASK_SIZE - len)"
check.
handle_swbp() doesn't report this failure (probably it should) and silently
restarts the probed insn. Endless loop.
I think that the right fix should change the x86 get_unmapped_area() paths
to rely on TIF_ADDR32 rather than in_32bit_syscall(). Note also that if
CONFIG_X86_X32_ABI=y, in_x32_syscall() falsely returns true in this case
because ->orig_ax = -1.
But we need a simple fix for -stable, so this patch just sets TS_COMPAT if
the probed task is 32-bit to make in_ia32_syscall() true.
Fixes: 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: Paulo Andrade <pandrade@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/aV5uldEvV7pb4RA8@redhat.com/
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/aWO7Fdxn39piQnxu@redhat.com
|
|
Some resources can be removed asynchronously, for example, resources
provided by a hot-pluggable device like USB. When holding a reference
to such a resource, it's possible for the resource to be removed and
its memory freed, leading to use-after-free errors on subsequent access.
The "revocable" mechanism addresses this by establishing a weak reference
to a resource that might be freed at any time. It allows a resource
consumer to safely attempt to access the resource, guaranteeing that the
access is valid for the duration of its use, or it fails safely if the
resource has already been revoked.
The implementation uses a provider/consumer model built on Sleepable
RCU (SRCU) to guarantee safe memory access:
- A resource provider, such as a driver for a hot-pluggable device,
allocates a struct revocable_provider and initializes it with a pointer
to the resource.
- A resource consumer that wants to access the resource allocates a
struct revocable which acts as a handle containing a reference to the
provider.
- To access the resource, the consumer uses revocable_try_access().
This function enters an SRCU read-side critical section and returns
the pointer to the resource. If the provider has already freed the
resource, it returns NULL. After use, the consumer calls
revocable_withdraw_access() to exit the SRCU critical section. The
REVOCABLE_TRY_ACCESS_WITH() and REVOCABLE_TRY_ACCESS_SCOPED() are
convenient helpers for doing that.
- When the provider needs to remove the resource, it calls
revocable_provider_revoke(). This function sets the internal resource
pointer to NULL and then calls synchronize_srcu() to wait for all
current readers to finish before the resource can be completely torn
down.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260116080235.350305-2-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge fixes related to the energy model management for 6.19-rc6:
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)
* pm-em:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
|
|
Without exception all caller do that. So move the allocation into the
helper.
This reduces boilerplate and removes unnecessary error checking.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://patch.msgid.link/20260115122341.556026-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert the limited MIPI clock calculations to a full range of settings
based on math including H/W limitation validation.
Since the required DSI division setting must be specified from external
sources before calculations, expose a new API to set it.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251124131003.992554-2-chris.brandt@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add reference counting to queues. When all queues are occupied, tfm
will reuse queues with the same algorithm type that have already
been allocated in the kernel. The corresponding queue will be
released when the reference count reaches 1.
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Consolidate the creation and start of qp into the function
hisi_qm_alloc_qps_node. This change eliminates the need for
each module to perform these steps in two separate phases
(creation and start).
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When a single queue used by multiple tfms, the protection of shared
resources by individual module driver programs is no longer
sufficient. The hisi_qp_send needs to be ensured by the lock in qp.
Fixes: 5fdb4b345cfb ("crypto: hisilicon - add a lock for the qp send operation")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Originally, when a queue was requested, it could only be configured
with the default algorithm type of 0. Now, when multiple tfms use
the same queue, the queue must be selected based on its attributes
to meet the requirements of tfm tasks. So the algorithm type
attribute of queue need to be distinguished. Just like a queue used
for compression in ZIP cannot be used for decompression tasks.
Fixes: 3f1ec97aacf1 ("crypto: hisilicon/qm - Put device finding logic into QM")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
for callback
When multiple tfm use a same qp, the backlog data should be managed
centrally by the qp, rather than in the qp_ctx of each req.
Additionally, since SEC_BD_TYPE1 and SEC_BD_TYPE2 cannot use the
tag of the sqe to carry the virtual address of the req, the sent
sqe is stored in the qp. This allows the callback function to get
the req address. To handle the differences between hardware types,
the callback functions are split into two separate implementations.
Fixes: f0ae287c5045 ("crypto: hisilicon/sec2 - implement full backlog mode for sec")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
No user of PHY fixups unregisters these. IOW: The fixup unregistering
functions are unused and can be removed. Remove also documentation
for these functions. Whilst at it, remove also mentioning of
phy_register_fixup() from the Documentation, as this function has been
static since ea47e70e476f ("net: phy: remove fixup-related definitions
from phy.h which are not used outside phylib").
Fixup unregistering functions were added with f38e7a32ee4f
("phy: add phy fixup unregister functions") in 2016, and last user
was removed with 6782d06a47ad ("net: usb: lan78xx: Remove KSZ9031 PHY
fixup") in 2024.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ff8ac321-435c-48d0-b376-fbca80c0c22e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Vinod Koul says:
====================
phy common properties
Introduce "rx-polarity" and "tx-polarity" device tree properties
with Kunit tests (from Vladimir Oltean).
* tag 'phy_common_properties' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: add phy_get_rx_polarity() and phy_get_tx_polarity()
dt-bindings: phy-common-props: RX and TX lane polarity inversion
dt-bindings: phy-common-props: ensure protocol-names are unique
dt-bindings: phy-common-props: create a reusable "protocol-names" definition
dt-bindings: phy: rename transmit-amplitude.yaml to phy-common-props.yaml
====================
Link: https://patch.msgid.link/aWeXvFcGNK5T6As9@vaman
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Annotate the #else and #endif keywords in large #ifdef/#else/#endif
sections, to improve readability.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
<linux/clk.h> contains two consecutive #ifdef/#else/#endif sections
that check for CONFIG_HAVE_CLK_PREPARE: one for prepare-related
functionality, and a second for unprepare-related functionality.
Reduce #ifdef clutter by merging them.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The clk_save_context() and clk_restore_context() helpers are only
implemented by the Common Clock Framework. They are not available when
using legacy clock frameworks. Dummy implementations are provided, but
only if no clock support is available at all.
Hence when CONFIG_HAVE_CLK=y, but CONFIG_COMMON_CLK is not enabled:
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_resume':
air_en8811h.c:(.text+0x83e): undefined reference to `clk_restore_context'
m68k-linux-gnu-ld: drivers/net/phy/air_en8811h.o: in function `en8811h_suspend':
air_en8811h.c:(.text+0x856): undefined reference to `clk_save_context'
Fix this by moving forward declarations and dummy implementions from the
HAVE_CLK to the COMMON_CLK section.
Fixes: 8b95d1ce3300c411 ("clk: Add functions to save/restore clock context en-masse")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511301553.eaEz1nEW-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc6).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- atomic: Introduce Gamma/Degamma LUT size check
- gem: Fix a leak in drm_gem_get_unmapped_area
- gpuvm: API sanitation for Rust bindings
- panic: Few corner-cases fixes
Driver Changes:
- Replace system workqueue with percpu equivalent
- amdxdna: Update message buffer allocation requirements, Update
firmware version check
- imagination: Add AM62P support
- ivpu: Implement warm boot flow
- rockchip: Get rid of atomic_check fixups, Add Rockchip RK3506 Support
- rocket: Cleanups
- bridge:
- dw-hdmi-qp: Add support for HPD-less setups
- panel:
- mantix: Various power management related improvements
- new panels: Innolux G150XGE-L05,
- dma-buf:
- cma: Call clear_page instead of memset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260115-lilac-dragon-of-opposition-ac0a30@houat
|
|
Currently, the driver's device private data is allocated and initialized
from driver core code called from bus abstractions after the driver's
probe() callback returned the corresponding initializer.
Similarly, the driver's device private data is dropped within the
remove() callback of bus abstractions after calling the remove()
callback of the corresponding driver.
However, commit 6f61a2637abe ("rust: device: introduce
Device::drvdata()") introduced an accessor for the driver's device
private data for a Device<Bound>, i.e. a device that is currently bound
to a driver.
Obviously, this is in conflict with dropping the driver's device private
data in remove(), since a device can not be considered to be fully
unbound after remove() has finished:
We also have to consider registrations guarded by devres - such as IRQ
or class device registrations - which are torn down after remove() in
devres_release_all().
Thus, it can happen that, for instance, a class device or IRQ callback
still calls Device::drvdata(), which then runs concurrently to remove()
(which sets dev->driver_data to NULL and drops the driver's device
private data), before devres_release_all() started to tear down the
corresponding registration. This is because devres guarded registrations
can, as expected, access the corresponding Device<Bound> that defines
their scope.
In C it simply is the driver's responsibility to ensure that its device
private data is freed after e.g. an IRQ registration is unregistered.
Typically, C drivers achieve this by allocating their device private data
with e.g. devm_kzalloc() before doing anything else, i.e. before e.g.
registering an IRQ with devm_request_threaded_irq(), relying on the
reverse order cleanup of devres.
Technically, we could do something similar in Rust. However, the
resulting code would be pretty messy:
In Rust we have to differentiate between allocated but uninitialized
memory and initialized memory in the type system. Thus, we would need to
somehow keep track of whether the driver's device private data object
has been initialized (i.e. probe() was successful and returned a valid
initializer for this memory) and conditionally call the destructor of
the corresponding object when it is freed.
This is because we'd need to allocate and register the memory of the
driver's device private data *before* it is initialized by the
initializer returned by the driver's probe() callback, because the
driver could already register devres guarded registrations within
probe() outside of the driver's device private data initializer.
Luckily there is a much simpler solution: Instead of dropping the
driver's device private data at the end of remove(), we just drop it
after the device has been fully unbound, i.e. after all devres callbacks
have been processed.
For this, we introduce a new post_unbind() callback private to the
driver-core, i.e. the callback is neither exposed to drivers, nor to bus
abstractions.
This way, the driver-core code can simply continue to conditionally
allocate the memory for the driver's device private data when the
driver's initializer is returned from probe() - no change needed - and
drop it when the driver-core code receives the post_unbind() callback.
Closes: https://lore.kernel.org/all/DEZMS6Y4A7XE.XE7EUBT5SJFJ@kernel.org/
Fixes: 6f61a2637abe ("rust: device: introduce Device::drvdata()")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-7-dakr@kernel.org
[ Remove #ifdef CONFIG_RUST, rename post_unbind() to post_unbind_rust().
- Danilo]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
