| Age | Commit message (Collapse) | Author |
|---|
|
No need to conditional compile that code, let the compilers dead code
elimination handle it instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://lore.kernel.org/r/20251006134713.1846-1-christian.koenig@amd.com
|
|
Using drm_mode_size_dumb() to compute the size of dumb buffers introduced
an 8-byte alignment constraint on the pitch that wasn’t present before.
Let’s remove this constraint, which isn’t necessarily required and may
cause buffers to be allocated larger than needed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 4977dcecb931 ("drm/gem-shmem: Compute dumb-buffer sizes with drm_mode_size_dumb()")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251126-lcd_pitch_alignment-v1-2-991610a1e369@microchip.com
|
|
Using drm_mode_size_dumb() to compute the size of dumb buffers introduced
an 8-byte alignment constraint on the pitch that wasn’t present before.
Let’s remove this constraint, which isn’t necessarily required and may
cause buffers to be allocated larger than needed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: dcacfcd35cef ("drm/gem-dma: Compute dumb-buffer sizes with drm_mode_size_dumb()")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251126-lcd_pitch_alignment-v1-1-991610a1e369@microchip.com
|
|
kbd_led_set() can sleep, and so may not be used as the brightness_set()
callback.
Otherwise using this led with a trigger leads to system hangs
accompanied by:
BUG: scheduling while atomic: acpi_fakekeyd/2588/0x00000003
CPU: 4 UID: 0 PID: 2588 Comm: acpi_fakekeyd Not tainted 6.17.9+deb14-amd64 #1 PREEMPT(lazy) Debian 6.17.9-1
Hardware name: ASUSTeK COMPUTER INC. ASUS EXPERTBOOK B9403CVAR/B9403CVAR, BIOS B9403CVAR.311 12/24/2024
Call Trace:
<TASK>
[...]
schedule_timeout+0xbd/0x100
__down_common+0x175/0x290
down_timeout+0x67/0x70
acpi_os_wait_semaphore+0x57/0x90
[...]
asus_wmi_evaluate_method3+0x87/0x190 [asus_wmi]
led_trigger_event+0x3f/0x60
[...]
Fixes: 9fe44fc98ce4 ("platform/x86: asus-wmi: Simplify the keyboard brightness updating process")
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20251129101307.18085-3-anton@khirnov.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
scanned in again after probe failed"
This reverts commit ab2068a6fb84751836a84c26ca72b3beb349619d.
When probing the exp-attached sata device, libsas/libata will issue a
hard reset in sas_probe_sata() -> ata_sas_async_probe(), then a
broadcast event will be received after the disk probe fails, and this
commit causes the probe will be re-executed on the disk, and a faulty
disk may get into an indefinite loop of probe.
Therefore, revert this commit, although it can fix some temporary issues
with disk probe failure.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20251202065627.140361-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When CONFIG_SCSI_UFSHCD=y and CONFIG_RPMB=m, the kernel fails to link
with undefined references to ufs_rpmb_probe() and ufs_rpmb_remove():
ld: drivers/ufs/core/ufshcd.c:8950: undefined reference to `ufs_rpmb_probe'
ld: drivers/ufs/core/ufshcd.c:10505: undefined reference to `ufs_rpmb_remove'
The issue is that RPMB depends on its consumers (MMC, UFS) in Kconfig,
which is backwards. This prevents proper module dependency handling when
the library is modular but consumers are built-in.
Fix by reversing the dependency:
- Remove 'depends on MMC || SCSI_UFSHCD' from RPMB Kconfig
- Add 'depends on RPMB || !RPMB' to SCSI_UFSHCD Kconfig
This allows RPMB to be an independent library while ensuring correct
linking in all module/built-in combinations.
Fixes: b06b8c421485 ("scsi: ufs: core: Add OP-TEE based RPMB driver for UFS devices")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511300443.h7sotuL0-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251202155138.2607210-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
CASF requires the second scaler for sharpness.
Do not expose the SHARPNESS_STRENGTH property if
the CRTC has fewer than two scalers.
v2: Modify header and commit message. [Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20251126084152.3905905-1-nemesa.garg@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Dynamically allocate cpumasks off of the stack if the kernel is
configured for a lot of CPUs, to handle a -Wframe-larger-than case
- The removal of next_pseudo_random32() after the last user was
switched over to the prandom interface
- The removal of get_random_u{8,16,32,64}_wait() functions, as there
were no users of those at all
- Some house keeping changes - a few grammar cleanups in the
comments, system_unbound_wq was renamed to system_dfl_wq, and
static_key_initialized no longer needs to be checked
* tag 'random-6.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: complete sentence of comment
random: drop check for static_key_initialized
random: remove unused get_random_var_wait functions
random: replace use of system_unbound_wq with system_dfl_wq
random: use offstack cpumask when necessary
prandom: remove next_pseudo_random32
media: vivid: use prandom
random: add missing words in function comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull arm64 FPSIMD on-stack buffer updates from Eric Biggers:
"This is a core arm64 change. However, I was asked to take this because
most uses of kernel-mode FPSIMD are in crypto or CRC code.
In v6.8, the size of task_struct on arm64 increased by 528 bytes due
to the new 'kernel_fpsimd_state' field. This field was added to allow
kernel-mode FPSIMD code to be preempted.
Unfortunately, 528 bytes is kind of a lot for task_struct. This
regression in the task_struct size was noticed and reported.
Recover that space by making this state be allocated on the stack at
the beginning of each kernel-mode FPSIMD section.
To make it easier for all the users of kernel-mode FPSIMD to do that
correctly, introduce and use a 'scoped_ksimd' abstraction"
* tag 'fpsimd-on-stack-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (23 commits)
lib/crypto: arm64: Move remaining algorithms to scoped ksimd API
lib/crypto: arm/blake2b: Move to scoped ksimd API
arm64/fpsimd: Allocate kernel mode FP/SIMD buffers on the stack
arm64/fpu: Enforce task-context only for generic kernel mode FPU
net/mlx5: Switch to more abstract scoped ksimd guard API on arm64
arm64/xorblocks: Switch to 'ksimd' scoped guard API
crypto/arm64: sm4 - Switch to 'ksimd' scoped guard API
crypto/arm64: sm3 - Switch to 'ksimd' scoped guard API
crypto/arm64: sha3 - Switch to 'ksimd' scoped guard API
crypto/arm64: polyval - Switch to 'ksimd' scoped guard API
crypto/arm64: nhpoly1305 - Switch to 'ksimd' scoped guard API
crypto/arm64: aes-gcm - Switch to 'ksimd' scoped guard API
crypto/arm64: aes-blk - Switch to 'ksimd' scoped guard API
crypto/arm64: aes-ccm - Switch to 'ksimd' scoped guard API
raid6: Move to more abstract 'ksimd' guard API
crypto: aegis128-neon - Move to more abstract 'ksimd' guard API
crypto/arm64: sm4-ce-gcm - Avoid pointless yield of the NEON unit
crypto/arm64: sm4-ce-ccm - Avoid pointless yield of the NEON unit
crypto/arm64: aes-ce-ccm - Avoid pointless yield of the NEON unit
lib/crc: Switch ARM and arm64 to 'ksimd' scoped guard API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull 'at_least' array size update from Eric Biggers:
"C supports lower bounds on the sizes of array parameters, using the
static keyword as follows: 'void f(int a[static 32]);'. This allows
the compiler to warn about a too-small array being passed.
As discussed, this reuse of the 'static' keyword, while standard, is a
bit obscure. Therefore, add an alias 'at_least' to compiler_types.h.
Then, add this 'at_least' annotation to the array parameters of
various crypto library functions"
* tag 'libcrypto-at-least-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: sha2: Add at_least decoration to fixed-size array params
lib/crypto: sha1: Add at_least decoration to fixed-size array params
lib/crypto: poly1305: Add at_least decoration to fixed-size array params
lib/crypto: md5: Add at_least decoration to fixed-size array params
lib/crypto: curve25519: Add at_least decoration to fixed-size array params
lib/crypto: chacha: Add at_least decoration to fixed-size array params
lib/crypto: chacha20poly1305: Statically check fixed array lengths
compiler_types: introduce at_least parameter decoration pseudo keyword
wifi: iwlwifi: trans: rename at_least variable to min_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b
checksums. With this change, all btrfs checksum algorithms now have
library APIs. btrfs is planned to start just using the library
directly.
This refactor also improves consistency between the BLAKE2b code
and BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by
default. The generic implementation of POLYVAL is greatly improved
as well.
- Clean up the BLAKE2s code
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits)
fscrypt: Drop obsolete recommendation to enable optimized POLYVAL
crypto: polyval - Remove the polyval crypto_shash
crypto: hctr2 - Convert to use POLYVAL library
lib/crypto: x86/polyval: Migrate optimized code into library
lib/crypto: arm64/polyval: Migrate optimized code into library
lib/crypto: polyval: Add POLYVAL library
crypto: polyval - Rename conflicting functions
lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs
lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value
lib/crypto: x86/blake2s: Improve readability
lib/crypto: x86/blake2s: Use local labels for data
lib/crypto: x86/blake2s: Drop check for nblocks == 0
lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit
lib/crypto: arm, arm64: Drop filenames from file comments
lib/crypto: arm/blake2s: Fix some comments
crypto: s390/sha3 - Remove superseded SHA-3 code
crypto: sha3 - Reimplement using library API
crypto: jitterentropy - Use default sha3 implementation
lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions
lib/crypto: sha3: Support arch overrides of one-shot digest functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These add Microsoft fan extensions support to the ACPI fan driver, fix
a bug in ACPICA, update other ACPI drivers (processor, time and alarm
device), update ACPI power management code and ACPI device properties
management, and fix an ACPI utility:
- Avoid walking the ACPI namespace in the AML interpreter if the
starting node cannot be determined (Cryolitia PukNgae)
- Use min() instead of min_t() in the ACPI device properties handling
code to avoid discarding significant bits (David Laight)
- Fix potential fwnode refcount leak in
acpi_fwnode_graph_parse_endpoint() that may prevent the parent
fwnode from being released (Haotian Zhang)
- Rework acpi_graph_get_next_endpoint() to use ACPI functions only,
remove unnecessary conditionals from it to make it easier to
follow, and make acpi_get_next_subnode() static (Sakari Ailus)
- Drop unused function acpi_get_lps0_constraint(), make some
Low-Power S0 callback functions for suspend-to-idle static, and
rearrange the code retrieving Low-Power S0 constraints so it only
runs when the constraints are actually used (Rafael Wysocki)
- Drop redundant locking from the ACPI battery driver (Rafael
Wysocki)
- Improve runtime PM in the ACPI time and alarm device (TAD) driver
using guard macros and rearrange code related to runtime PM in
acpi_tad_remove() (Rafael Wysocki)
- Add support for Microsoft fan extensions to the ACPI fan driver
along with notification support and work around a 64-bit firmware
bug in that driver (Armin Wolf)
- Use ACPI_FREE() to free ACPI buffer in the ACPI DPTF code
(Kaushlendra Kumar)
- Fix a memory leak and a resource leak in the ACPI pfrut utility
(Malaya Kumar Rout)
- Replace `core::mem::zeroed` with `pin_init::zeroed` in the ACPI
Rust code (Siyuan Huang)
- Update the ACPI code to use the new style of allocating workqueues
and new global workqueues (Marco Crivellari)
- Fix two spelling mistakes in the ACPI code (Chu Guangqing)
- Fix ISAPNP to generate uevents to auto-load modules (René Rebe)
- Relocate the state flags initialization in the ACPI processor idle
driver and drop redundant C-state count checks from it (Huisong Li)
- Fix map_x2apic_id() in the ACPI processor core driver for
amd-pstate on am4 (René Rebe)"
* tag 'acpi-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
ACPI: PM: Fix a spelling mistake
ACPI: LPSS: Fix a spelling mistake
ACPI: processor_core: fix map_x2apic_id for amd-pstate on am4
ACPICA: Avoid walking the Namespace if start_node is NULL
ACPI: tools: pfrut: fix memory leak and resource leak in pfrut.c
ACPI: property: use min() instead of min_t()
PNP: Fix ISAPNP to generate uevents to auto-load modules
ACPI: property: Fix fwnode refcount leak in acpi_fwnode_graph_parse_endpoint()
ACPI: DPTF: Use ACPI_FREE() for ACPI buffer deallocation
ACPI: processor: idle: Drop redundant C-state count checks
ACPI: thermal: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: Add WQ_PERCPU to alloc_workqueue() users
ACPI: EC: Add WQ_PERCPU to alloc_workqueue() users
ACPI: OSL: replace use of system_wq with system_percpu_wq
ACPI: scan: replace use of system_unbound_wq with system_dfl_wq
ACPI: fan: Add support for Microsoft fan extensions
ACPI: fan: Add hwmon notification support
ACPI: fan: Add basic notification support
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Provide a new interface for dynamic configuration and deconfiguration
of hotplug memory, allowing with and without memmap_on_memory
support. This makes the way memory hotplug is handled on s390 much
more similar to other architectures
- Remove compat support. There shouldn't be any compat user space
around anymore, therefore get rid of a lot of code which also doesn't
need to be tested anymore
- Add stackprotector support. GCC 16 will get new compiler options,
which allow to generate code required for kernel stackprotector
support
- Merge pai_crypto and pai_ext PMU drivers into a new driver. This
removes a lot of duplicated code. The new driver is also extendable
and allows to support new PMUs
- Add driver override support for AP queues
- Rework and extend zcrypt and AP trace events to allow for tracing of
crypto requests
- Support block sizes larger than 65535 bytes for CCW tape devices
- Since the rework of the virtual kernel address space the module area
and the kernel image are within the same 4GB area. This eliminates
the need of weak per cpu variables. Get rid of
ARCH_MODULE_NEEDS_WEAK_PER_CPU
- Various other small improvements and fixes
* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
s390/entry: Use lay instead of aghik
s390/vdso: Get rid of -m64 flag handling
s390/vdso: Rename vdso64 to vdso
s390: Rename head64.S to head.S
s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
s390: Add stackprotector support
s390/modules: Simplify module_finalize() slightly
s390: Remove KMSG_COMPONENT macro
s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
s390/ap: Restrict driver_override versus apmask and aqmask use
s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
s390/ap: Support driver_override for AP queue devices
s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
s390/debug: Update description of resize operation
s390/syscalls: Switch to generic system call table generation
s390/syscalls: Remove system call table pointer from thread_struct
s390/uapi: Remove 31 bit support from uapi header files
s390: Remove compat support
tools: Remove s390 compat support
...
|
|
After issuing a firmware suspend request, the driver must ensure that the
suspend operation has completed before proceeding. Add polling of the
MPNPU_PWAITMODE register to confirm that the firmware has fully entered
the suspended state. This prevents race conditions where subsequent
operations assume the firmware is idle before it has actually completed
its suspend sequence.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251202165427.507414-1-lizhi.hou@amd.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.19-2025-12-02:
amdgpu:
- Unified MES fix
- SMU 11 unbalanced irq fix
- Fix for driver reloading on APUs
- pp_table sysfs fix
- Fix memory leak in fence handling
- HDMI fix
- DC cursor fixes
- eDP panel parsing fix
- Brightness fix
- DC analog fixes
- EDID retry fixes
- UserQ fixes
- RAS fixes
- IP discovery fix
- Add missing locking in amdgpu_ttm_access_memory_sdma()
- Smart Power OLED fix
- PRT and page fault fixes for GC 6-8
- VMID reservation fix
- ACP platform device fix
- Add missing vm fault handling for GC 11-12
- VPE fix
amdkfd:
- Partitioning fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20251202220101.2039347-1-alexander.deucher@amd.com
|
|
Merge in late fixes in preparation for the net-next PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Use the proper accessors when reading CR3 as part of the page level
transitions (5-level to 4-level, the use case being kexec) so that
only the physical address in CR3 is picked up and not flags which are
above the physical mask shift
- Clean up and unify __phys_addr_symbol() definitions
* tag 'x86_mm_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Fix page table access in 5-level to 4-level paging transition
x86/boot: Fix page table access in 5-level to 4-level paging transition
x86/mm: Unify __phys_addr_symbol()
|
|
Implement the SEV-TIO (Trusted I/O) firmware interface for PCIe TDISP
(Trust Domain In-Socket Protocol). This enables secure communication
between trusted domains and PCIe devices through the PSP (Platform
Security Processor).
The implementation includes:
- Device Security Manager (DSM) operations for establishing secure links
- SPDM (Security Protocol and Data Model) over DOE (Data Object Exchange)
- IDE (Integrity Data Encryption) stream management for secure PCIe
This module bridges the SEV firmware stack with the generic PCIe TSM
framework.
This is phase1 as described in Documentation/driver-api/pci/tsm.rst.
On AMD SEV, the AMD PSP firmware acts as TSM (manages the security/trust).
The CCP driver provides the interface to it and registers in the TSM
subsystem.
Detect the PSP support (reported via FEATURE_INFO + SNP_PLATFORM_STATUS)
and enable SEV-TIO in the SNP_INIT_EX call if the hardware supports TIO.
Implement SEV TIO PSP command wrappers in sev-dev-tio.c and store
the data in the SEV-TIO-specific structs.
Implement TSM hooks and IDE setup in sev-dev-tsm.c.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/692f506bb80c9_261c11004@dwillia2-mobl4.notmuch
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based on the
Cadence High Performance Architecture (HPA) PCIe core.
The controller supports MSI/MSI-X via GICv3, Single Virtual Channel, and
Single Function.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
[mani: moved the PCI ID definitions and squashed Kconfig change]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: sort Kconfig menu entry, squash
https://lore.kernel.org/r/aSBqp0cglr-Sc8na@stanley.mountain]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251108140305.1120117-8-hans.zhang@cixtech.com
|
|
Add support for Cadence PCIe RP configuration for High Performance
Architecture (HPA) controllers. The Cadence High Performance controllers
are the latest PCIe controllers that have support for DMA, optional IDE
and updated register set. Add a common library for High Performance
Architecture (HPA) PCIe controllers.
Signed-off-by: Manikandan K Pillai <mpillai@cadence.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: squash https://lore.kernel.org/r/20251120093518.2760492-1-jiapeng.chong@linux.alibaba.com,
squash https://lore.kernel.org/all/52abaad8-a43e-4e29-93d7-86a3245692c3@cixtech.com/]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251108140305.1120117-5-hans.zhang@cixtech.com
|
|
The SEV-TIO switch in the AMD BIOS is reported to the OS via
the IOMMU Extended Feature 2 register (EFR2), bit 1.
Add helper to parse the bit and report the feature presence.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/20251202024449.542361-4-aik@amd.com
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The snp_reclaim_pages() helper reclaims pages in the FW state. SEV-TIO
and the TMPM driver (a hardware engine which smashes IOMMU PDEs among
other things) will use to reclaim memory when cleaning up.
Share and export snp_reclaim_pages().
Most of the SEV-TIO code uses sev_do_cmd() which locks the sev_cmd_mutex
and already exported. But the SNP init code (which also sets up SEV-TIO)
executes under the sev_cmd_mutex lock so the SEV-TIO code has to use
the __sev_do_cmd_locked() helper. This one though does not need to be
exported/shared globally as SEV-TIO is a part of the CCP driver still.
Share __sev_do_cmd_locked() via the CCP internal header.
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Link: https://patch.msgid.link/20251202024449.542361-2-aik@amd.com
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add initial support of the PCIe controller for the NXP S32G SoC family.
Only host mode is supported.
Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
[mani: replaced memblock_start_of_DRAM with hardcoded boundary addr]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251121164920.2008569-4-vincent.guittot@linaro.org
|
|
Add register and bitfield definitions:
- GEN3_RELATED_OFF_EQ_PHASE_2_3 field of GEN3_RELATED_OFF
- Coherency control registers
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251121164920.2008569-3-vincent.guittot@linaro.org
|
|
To find an unused Binder handle, Rust Binder currently iterates the
red/black tree from the beginning until it finds a gap in the keys. This
is extremely slow.
To improve the performance, add a bitmap that keeps track of which
indices are actually in use. This allows us to quickly find an unused
key in the red/black tree.
For a benchmark, please see the below numbers that were obtained from
modifying binderThroughputTest to send a node with each transaction and
stashing it in the server. This results in the number of nodes
increasing by one for every transaction sent. I got the following table
of roundtrip latencies (in µs):
Transaction Range │ Baseline (Rust) │ Bitmap (Rust) │ Comparison (C)
0 - 10,000 │ 176.88 │ 92.93 │ 99.41
10,000 - 20,000 │ 437.37 │ 87.74 │ 98.55
20,000 - 30,000 │ 677.49 │ 76.24 │ 96.37
30,000 - 40,000 │ 901.76 │ 83.39 │ 96.73
40,000 - 50,000 │ 1126.62 │ 100.44 │ 94.57
50,000 - 60,000 │ 1288.98 │ 94.38 │ 96.64
60,000 - 70,000 │ 1588.74 │ 88.27 │ 96.36
70,000 - 80,000 │ 1812.97 │ 93.97 │ 91.24
80,000 - 90,000 │ 2062.95 │ 92.22 │ 102.01
90,000 - 100,000 │ 2330.03 │ 97.18 │ 100.31
It should be clear that the current Rust code becomes linearly slower
per insertion as the number of calls to rb_next() per transaction
increases. After this change, the time to find an ID number appears
constant. (Technically it is not constant-time as both insertion and
removal scan the entire bitmap. However, quick napkin math shows that
scanning the entire bitmap with N=100k takes ~1.5µs, which is neglible
in a benchmark where the rountrip latency is 100µs.)
I've included a comparison to the C driver, which uses the same bitmap
algorithm as this patch since commit 15d9da3f818c ("binder: use bitmap
for faster descriptor lookup").
This currently checks if the bitmap should be shrunk after every
removal. One potential future change is introducing a shrinker to make
this operation O(1), but based on the benchmark above this does not seem
required at this time.
Reviewed-by: Burak Emir <bqe@google.com>
Reviewed-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
There were many printk log interfaces which do no had
any KERN_INFO with them and they can be replaced with
dev_info which will allow better log level handling
making messages clear and manageable.
No functional changes to the driver behavior are introduced.
Only the logging method has been replaced as per modern
kernel coding guidelines.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Javier Garcia <rampxxxx@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The variables were never clamped because the return value of clamp_val()
was not used. Fix this by assigning the clamped values, and use clamp()
instead of clamp_val().
Cc: stable@vger.kernel.org
Fixes: 3f16ff608a75 ("[ARM] pxafb: cleanup of the timing checking code")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- imh_edac: Add a new EDAC driver for Intel Diamond Rapids and future
incarnations of this memory controllers architecture
- amd64_edac: Remove the legacy csrow sysfs interface which has been
deprecated and unused (we assume) for at least a decade
- Add the capability to fallback to BIOS-provided address translation
functionality (ACPI PRM) which can be used on systems unsupported by
the current AMD address translation library
- The usual fixes, fixlets, cleanups and improvements all over the
place
* tag 'edac_updates_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Replace bitwise_xor_bits() with hweight16()
EDAC/igen6: Fix error handling in igen6_edac driver
EDAC/imh: Setup 'imh_test' debugfs testing node
EDAC/{skx_comm,imh}: Detect 2-level memory configuration
EDAC/skx_common: Extend the maximum number of DRAM chip row bits
EDAC/{skx_common,imh}: Add EDAC driver for Intel Diamond Rapids servers
EDAC/skx_common: Prepare for skx_set_hi_lo()
EDAC/skx_common: Prepare for skx_get_edac_list()
EDAC/{skx_common,skx,i10nm}: Make skx_register_mci() independent of pci_dev
EDAC/ghes: Replace deprecated strcpy() in ghes_edac_report_mem_error()
EDAC/ie31200: Fix error handling in ie31200_register_mci
RAS/CEC: Replace use of system_wq with system_percpu_wq
EDAC: Remove the legacy EDAC sysfs interface
EDAC/amd64: Remove NUM_CONTROLLERS macro
EDAC/amd64: Generate ctl_name string at runtime
RAS/AMD/ATL: Require PRM support for future systems
ACPI: PRM: Add acpi_prm_handler_available()
RAS/AMD/ATL: Return error codes from helper functions
|
|
403ae52ac047 ("sparc: fix drivers/video/tcx.c warning") changed the
physbase initializing breaking the user-space mmap, e.g. for Xorg
entirely.
Fix fbdev mmap table so the sbus mmap helper work correctly, and
not try to map vastly (physbase) offset memory.
Fixes: 403ae52ac047 ("sparc: fix drivers/video/tcx.c warning")
Cc: <stable@vger.kernel.org>
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq cleanup from Thomas Gleixner:
"Tree wide cleanup of the remaining users of in_irq() which got
replaced by in_hardirq() and marked deprecated in 2020"
* tag 'core-core-2025-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide: Remove in_irq()
|
|
Bspec states that the new AUX power enable/disable sequences are
associated with the LT PHY. As such, use HAS_LT_PHY() instead of IP
checks in those paths in the driver code.
While at it, also move the comment that we can't use the power status
flag to the "else" branch, since that comment is not applicable for the
LT PHY.
Bspec: 68967
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-9-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
We will need to HAS_LT_PHY() that macro in code outside of LT PHY
implementation. Move its definition to intel_display_device.h.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-8-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
NVL uses the Lake Tahoe PHY for display output and the driver recently
added the macro HAS_LT_PHY() to allow selecting code paths specific for
that type of PHY.
While NVL uses Xe3p_LPD as display IP, the type of PHY is actually
defined at the SoC level, so use a platform check instead of display
version.
Bspec: 74199
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-7-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Add platform description and PCI IDs for NVL-S.
BSpec: 74201
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-6-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Xe3p_LPD added several bits containing information that can be relevant
to debugging FIFO underruns. Add the logic necessary to handle them
when reporting underruns.
This was adapted from the initial patch[1] from Sai Teja Pottumuttu.
[1] https://lore.kernel.org/all/20251015-xe3p_lpd-basic-enabling-v1-12-d2d1e26520aa@intel.com/
v2:
- Handle FBC-related bits in intel_fbc.c. (Ville)
- Do not use intel_fbc_id_for_pipe (promoted from
skl_fbc_id_for_pipe), but use pipe's primary plane to get the FBC
instance. (Ville, Matt)
- Improve code readability by moving logic specific to logging fields
of UNDERRUN_DBG1 to a separate function. (Jani)
v3:
- Use crtc->base.primary instead of cycling through all crtcs
Bspec: 69111, 69561, 74411, 74412
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-5-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Starting with Xe3p_LPD, the VBT has a new field, called in the driver
"dedicated_external", which tells that a Type-C capable port is
physically connected to a PHY outside of the Type-C subsystem. When
that's the case, the driver must not do the extra Type-C programming for
that port. Update intel_encoder_is_tc() to check for that case.
While at it, add a note to intel_phy_is_tc() to remind us that it is
about whether the respective port is a Type-C capable port rather than
the PHY itself.
(Maybe it would be a nice idea to rename intel_phy_is_tc()?)
Note that this was handled with a new bool member added to struct
intel_digital_port instead of having querying the VBT directly because
VBT memory is freed (intel_bios_driver_remove) before encoder cleanup
(intel_ddi_encoder_destroy), which would cause an oops to happen when
the latter calls intel_encoder_is_tc(). This could be fixed by keeping
VBT data around longer, but that's left for a follow-up work, if deemed
necessary.
v2:
- Drop printing info about dedicated external, now that we are doing
it when parsing the VBT. (Jani)
- Add a FIXME comment on the code explaining why we need to store
dedicated_external in struct intel_digital_port. (Jani)
v3:
- Simplify the code by using NULL check for dig_port to avoid using
intel_encoder_is_dig_port(). (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-4-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Starting with Xe3p_LPD, when intel_phy_is_tc() returns true, it does
not necessarily mean that the port is connected to a PHY in the Type-C
subsystem. The reason is that there is now a VBT field called
dedicated_external that will indicate that a Type-C capable port is
connected to a (most likely) combo/dedicated PHY. When that's the case,
we must not do the extra programming required for Type-C connections.
In an upcoming change, we will modify intel_encoder_is_tc() to take the
VBT field dedicated_external into consideration. Update
intel_display_power_well.c to use that function instead of
intel_phy_is_tc().
Note that, even though icl_aux_power_well_{enable,disable} are not part
of Xe3p_LPD's display paths, we modify them anyway for uniformity.
v2:
- Add and use icl_aux_pw_is_tc_phy() helper to avoid explicit encoder
lookup. (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v1
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-3-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
VBT version 264 adds new fields associated to Xe3p_LPD's new ways of
configuring SoC for TC ports and PHYs. Update the code to match the
updates in VBT.
The new field dedicated_external is used to represent TC ports that are
connected to PHYs outside of the Type-C subsystem, meaning that they
behave like dedicated ports and don't require the extra Type-C
programming. In an upcoming change, we will update the driver to take
this field into consideration when detecting the type of port.
The new field dyn_port_over_tc is used to inform that the TC port can be
dynamically allocated for a legacy connector in the Type-C subsystem,
which is a new feature in Xe3p_LPD. In upcoming changes, we will use
that field in order to handle the IOM resource management programming
required for that.
Note that, when dedicated_external is set, the fields dp_usb_type_c and
tbt are tagged as "don't care" in the spec, so they should be ignored in
that case, so also add a sanitization function to take care of forcing
them to zero when dedicated_external is true.
v2:
- Use sanitization function to force dp_usb_type_c and tbt fields to
be zero instead of adding a
intel_bios_encoder_is_dedicated_external() check in each of their
respective accessor functions. (Jani)
- Print info about dedicated external ports in print_ddi_port().
(Jani)
v3:
- Also zero out field dyn_port_over_tc when dedicated_external is set.
(Imre)
- Use intel_bios_encoder_is_dedicated_external() directly instead of
storing return value into variable in print_ddi_port(). (Imre)
- Also print info for dyn_port_over_tc in print_ddi_port(). (Imre)
Bspec: 20124, 68954, 74304
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Shekhar Chauhan <shekhar.chauhan@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-2-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource and clockevent drivers:
- A new driver for the Realtel system timer
- Prevent the unbinding of timers when the drivers do not support
that
- Expand the timer counter readout for the SPRD driver to 64 bit
to allow IOT devices suspend times of more than 36 hours, which
is the current limit of the 32-bi readout
- The usual small cleanups, fixes and enhancements all over the
place"
* tag 'timers-clocksource-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers: Add Realtek system timer driver
dt-bindings: timer: Add Realtek SYSTIMER
clocksource/drivers/stm32-lp: Drop unused module alias
clocksource/drivers/rda: Add sched_clock_register for RDA8810PL SoC
clocksource/drivers/nxp-stm: Prevent driver unbind
clocksource/drivers/nxp-pit: Prevent driver unbind
clocksource/drivers/arm_arch_timer_mmio: Prevent driver unbind
clocksource/drivers/nxp-stm: Fix section mismatches
clocksource/drivers/sh_cmt: Always leave device running after probe
clocksource/drivers/stm: Fix double deregistration on probe failure
clocksource/drivers/ralink: Fix resource leaks in init error path
clocksource/drivers/timer-sp804: Fix read_current_timer() issue when clock source is not registered
clocksource/drivers/sprd: Enable register for timer counter from 32 bit to 64 bit
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.19
- Support for userspace handling of synchronous external aborts (SEAs),
allowing the VMM to potentially handle the abort in a non-fatal
manner.
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers in
hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ.
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU.
- Allow page table destruction to reschedule, fixing long need_resched
latencies observed when destroying a large VM.
- Minor fixes to KVM and selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for [PCI] MSI related code:
- Remove one variant of PCI/MSI management as all users have been
converted to use per device domains. That reduces the variants to
two:
The modern and the real archaic legacy variant, which keeps the
usual suspects in the museum category alive.
- Rework the platform MSI device ID detection mechanism in the ARM
GIC world to address resource leaks, duplicated code and other
details. This requires a corresponding preparatory step in the
PCI/iproc driver.
- Trivial core code cleanups"
* tag 'irq-msi-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-its: Rework platform MSI deviceID detection
PCI: iproc: Implement MSI controller node detection with of_msi_xlate()
genirq/msi: Slightly simplify msi_domain_alloc()
PCI/MSI: Delete pci_msi_create_irq_domain()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
"Boring updates for interrupt drivers:
- Support for a couple of new ARM64 and RISCV SoC variants and their
magic interrupt controllers which either can reuse existing code or
require quirks due to a botched hardware implementation
- More section mismatch fixes
- The usual cleanups and fixes all over the place"
* tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/meson-gpio: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: aspeed,ast2700: Correct #interrupt-cells and interrupts count
irqchip/aclint-sswi: Add Nuclei UX900 support
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC
irqchip/irq-bcm7038-l1: Remove unused reg_mask_status()
irqchip/sifive-plic: Fix call to __plic_toggle() in M-Mode code path
irqchip/sifive-plic: Add support for UltraRISC DP1000 PLIC
irqchip/sifive-plic: Cache the interrupt enable state
dt-bindings: interrupt-controller: Add UltraRISC DP1000 PLIC
dt-bindings: vendor-prefixes: Add UltraRISC
irqchip/qcom-irq-combiner: Rename driver structure
irqchip/riscv-imsic: Inline imsic_vector_from_local_id()
irqchip/riscv-imsic: Embed the vector array in lpriv
irqchip/riscv-imsic: Remove redundant irq_data lookups
irqchip/ts4800: Drop unused module alias
irqchip/mvebu-pic: Drop unused module alias
irqchip/meson-gpio: Drop unused module alias
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core and treewide cleanups:
- Rework of the Per Processor Interrupt (PPI) management on ARM[64]
PPI support was built under the assumption that the systems are
homogenous so that the same CPU local device types are connected to
them. That's unfortunately wishful thinking and created horrible
workarounds.
This rework provides affinity management for PPIs so that they can
be individually configured in the firmware tables and mops up the
related drivers all over the place.
- Prevent CPUSET/isolation changes to arbitrarily affine interrupt
threads to random CPUs, which ignores user or driver settings.
- Plug a harmless race in the interrupt affinity proc interface,
which allows to see a half updated mask
- Adjust the priority of secondary interrupt threads on RT, so that
the combination of primary and secondary thread emulates the
hardware interrupt plus thread scenario. Having them at the same
priority can cause starvation issues in some drivers"
* tag 'irq-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
genirq: Remove cpumask availability check on kthread affinity setting
genirq: Fix interrupt threads affinity vs. cpuset isolated partitions
genirq: Prevent early spurious wake-ups of interrupt threads
genirq: Use raw_spinlock_irq() in irq_set_affinity_notifier()
genirq/manage: Reduce priority of forced secondary interrupt handler
genirq/proc: Fix race in show_irq_affinity()
genirq: Fix percpu_devid irq affinity documentation
perf: arm_pmu: Kill last use of per-CPU cpu_armpmu pointer
irqdomain: Kill of_node_to_fwnode() helper
genirq: Kill irq_{g,s}et_percpu_devid_partition()
irqchip: Kill irq-partition-percpu
irqchip/apple-aic: Drop support for custom PMU irq partitions
irqchip/gic-v3: Drop support for custom PPI partitions
coresight: trbe: Request specific affinities for per CPU interrupts
perf: arm_spe_pmu: Request specific affinities for per CPU interrupts
perf: arm_pmu: Request specific affinities for per CPU NMIs/interrupts
genirq: Add request_percpu_irq_affinity() helper
genirq: Allow per-cpu interrupt sharing for non-overlapping affinities
genirq: Update request_percpu_nmi() to take an affinity
genirq: Add affinity to percpu_devid interrupt requests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"A large overhaul of the restartable sequences and CID management:
The recent enablement of RSEQ in glibc resulted in regressions which
are caused by the related overhead. It turned out that the decision to
invoke the exit to user work was not really a decision. More or less
each context switch caused that. There is a long list of small issues
which sums up nicely and results in a 3-4% regression in I/O
benchmarks.
The other detail which caused issues due to extra work in context
switch and task migration is the CID (memory context ID) management.
It also requires to use a task work to consolidate the CID space,
which is executed in the context of an arbitrary task and results in
sporadic uncontrolled exit latencies.
The rewrite addresses this by:
- Removing deprecated and long unsupported functionality
- Moving the related data into dedicated data structures which are
optimized for fast path processing.
- Caching values so actual decisions can be made
- Replacing the current implementation with a optimized inlined
variant.
- Separating fast and slow path for architectures which use the
generic entry code, so that only fault and error handling goes into
the TIF_NOTIFY_RESUME handler.
- Rewriting the CID management so that it becomes mostly invisible in
the context switch path. That moves the work of switching modes
into the fork/exit path, which is a reasonable tradeoff. That work
is only required when a process creates more threads than the
cpuset it is allowed to run on or when enough threads exit after
that. An artificial thread pool benchmarks which triggers this did
not degrade, it actually improved significantly.
The main effect in migration heavy scenarios is that runqueue lock
held time and therefore contention goes down significantly"
* tag 'core-rseq-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/mmcid: Switch over to the new mechanism
sched/mmcid: Implement deferred mode change
irqwork: Move data struct to a types header
sched/mmcid: Provide CID ownership mode fixup functions
sched/mmcid: Provide new scheduler CID mechanism
sched/mmcid: Introduce per task/CPU ownership infrastructure
sched/mmcid: Serialize sched_mm_cid_fork()/exit() with a mutex
sched/mmcid: Provide precomputed maximal value
sched/mmcid: Move initialization out of line
signal: Move MMCID exit out of sighand lock
sched/mmcid: Convert mm CID mask to a bitmap
cpumask: Cache num_possible_cpus()
sched/mmcid: Use cpumask_weighted_or()
cpumask: Introduce cpumask_weighted_or()
sched/mmcid: Prevent pointless work in mm_update_cpus_allowed()
sched/mmcid: Move scheduler code out of global header
sched: Fixup whitespace damage
sched/mmcid: Cacheline align MM CID storage
sched/mmcid: Use proper data structures
sched/mmcid: Revert the complex CID management
...
|
|
Switch to use i3c_xfer instead of i3c_priv_xfer because framework will
update to support HDR mode. i3c_priv_xfer is now an alias of i3c_xfer.
Replace i3c_device_do_priv_xfers() with i3c_device_do_xfers(..., I3C_SDR)
to align with the new API.
Prepare for removal of i3c_priv_xfer and i3c_device_do_priv_xfers().
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20251028-lm75-v1-3-9bf88989c49c@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Switch to use i3c_xfer instead of i3c_priv_xfer because framework will
update to support HDR mode. i3c_priv_xfer is now an alias of i3c_xfer.
Replace i3c_device_do_priv_xfers() with i3c_device_do_xfers(..., I3C_SDR)
to align with the new API.
Prepare for removal of i3c_priv_xfer and i3c_device_do_priv_xfers().
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20251028-lm75-v1-2-9bf88989c49c@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
