| Age | Commit message (Collapse) | Author |
|---|
|
Add missing null check for cci parameter before dereferencing it in
ucsi_sync_control_common(). The function can be called with cci=NULL
from ucsi_acknowledge(), which leads to a null pointer dereference
when accessing *cci in the condition check.
The crash occurs because the code checks if cci is not null before
calling ucsi->ops->read_cci(ucsi, cci), but then immediately
dereferences cci without a null check in the following condition:
(*cci & UCSI_CCI_COMMAND_COMPLETE).
KASAN trace:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ucsi_sync_control_common+0x2ae/0x4e0 [typec_ucsi]
Cc: stable <stable@kernel.org>
Fixes: 667ecac55861 ("usb: typec: ucsi: return CCI and message from sync_control callback")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251216122210.5457-1-superm1@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lpc32xx_udc_probe() acquires an i2c_client reference through
isp1301_get_client() but fails to release it in both error handling
paths and the normal removal path. This could result in a reference
count leak for the I2C device, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the probe failure path and in the remove function.
Calling path: isp1301_get_client() -> of_find_i2c_device_by_node() ->
i2c_find_device_by_fwnode(). As comments of i2c_find_device_by_fwnode()
says, 'The user must call put_device(&client->dev) once done with the
i2c client.'
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251215020931.15324-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dp_altmode_probe()
In error paths, call typec_altmode_put_plug() to drop the device reference
obtained by typec_altmode_get_plug().
Fixes: 71ba4fe56656 ("usb: typec: altmodes/displayport: add SOP' support")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251206070445.190770-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The delayed work item otg_event is initialized in fsl_otg_conf() and
scheduled under two conditions:
1. When a host controller binds to the OTG controller.
2. When the USB ID pin state changes (cable insertion/removal).
A race condition occurs when the device is removed via fsl_otg_remove():
the fsl_otg instance may be freed while the delayed work is still pending
or executing. This leads to use-after-free when the work function
fsl_otg_event() accesses the already freed memory.
The problematic scenario:
(detach thread) | (delayed work)
fsl_otg_remove() |
kfree(fsl_otg_dev) //FREE| fsl_otg_event()
| og = container_of(...) //USE
| og-> //USE
Fix this by calling disable_delayed_work_sync() in fsl_otg_remove()
before deallocating the fsl_otg structure. This ensures the delayed work
is properly canceled and completes execution prior to memory deallocation.
This bug was identified through static analysis.
Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251205034831.12846-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbhsp_get_pipe() set pipe's flags to IS_USED. In error paths,
usbhsp_put_pipe() is required to clear pipe's flags to prevent
pipe exhaustion.
Fixes: f1407d5c6624 ("usb: renesas_usbhs: Add Renesas USBHS common code")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20251204132129.109234-1-haoxiang_li2024@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_HUAWEI_GAOKUN [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_HUAWEI_GAOKUN [=y] && DRM_BRIDGE [=y] && OF [=y]
Add the same dependency we have in similar drivers to work around this.
Fixes: 00327d7f2c8c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251204101111.1035975-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some platforms, switching USB roles from host to device can trigger
controller faults due to premature PHY power-down. This occurs when the
PHY is disabled too early during teardown, causing synchronization
issues between the PHY and controller.
Keep susphy enabled during dwc3_host_exit() and dwc3_gadget_exit()
ensures the PHY remains in a low-power state capable of handling
required commands during role switch.
Cc: stable <stable@kernel.org>
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Udipto Goswami <udipto.goswami@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251126054221.120638-1-udipto.goswami@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixup replaces tty_vhangup() call with call to
tty_port_tty_vhangup(). Both calls hangup tty device
synchronously however tty_port_tty_vhangup() increases
reference count during the hangup operation using
scoped_guard(tty_port_tty).
Cc: stable <stable@kernel.org>
Fixes: 1f73b8b56cf3 ("xhci: dbgtty: fix device unregister")
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://patch.msgid.link/20251127111644.3161386-1-ukaszb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ucsi_psy_get_voltage_max and ucsi_psy_get_current_max are calculated
using whichever pdo is in the last position of the src_pdos array, presuming
it to be a fixed pdo, so the pdo_fixed_voltage or pdo_max_current
helpers are used on that last pdo.
However, non-Fixed PDOs such as Battery PDOs, Augmented PDOs (used for AVS and
for PPS) may exist, and are always at the end of the array if they do.
In the event one of these more advanced chargers are attached the helpers for
fixed return mangled values.
Here's an example case of a Google Pixel Flex Dual Port 67W USB-C Fast Charger
with PPS support:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=13400000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=5790000
POWER_SUPPLY_CURRENT_NOW=3250000
Voltage Max is reading as 13.4V, but that's an incorrect decode of the PPS
APDO in the last position. Same goes for CURRENT_MAX. 5.79A is incorrect.
Instead, enumerate through the src_pdos and filter just for Fixed PDOs for
now, and find the one with the highest voltage and current respectively.
After, from the same charger:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=20000000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=4000000
POWER_SUPPLY_CURRENT_NOW=3250000
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
current_now would always return 0 in for non-PD power sources, and the
negotiated current based on the Request RDO in PD mode.
For USB Type-C current or legacy Default USB cases current_now will present
the max value of those modes, as that is the equivalent of the Request RDO
in PD.
Also, current_now will now return 0 when the port is disconnected to match
the same behavior of current_max.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-2-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
configfs
When using f_midi from configfs the USB MIDI interface string is hardcoded
to 'MIDI function'.
This USB string descriptor is used by some third-party OS or software to
display the name of the MIDI device
Since we add an additional string option a new macro block was created to
factorize declarations
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251209164006.143219-1-victor.krawiec@arturia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DRM may want to register a notifier on the typec bus to know when
a typec altmode device is added, and distinguish between different
types of typec altmode device.
Export these things.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208015500.94-3-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port and plug altmodes can't be bound to the altmode
drivers because the altmode drivers are meant for partner
communication using the VDM (vendor defined messages), but
they can still be part of the bus. The bus will make sure
that the normal bus notifications are available also with
the port altmodes.
The previously used common device type for all alternate
modes is replaced with separate dedicated device types for
port, plug, and partner alternate modes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Link: https://patch.msgid.link/20251208015500.94-2-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the AST2700 SOC in the vhub gadget driver. AST2700
uses a 64-bit DMA addressing capability, so select 64-bit DMA mask
for compatible. AST2700 vhub also requires an reset line, so hook
up the optional reset control and assert/deassert it during probe
and remove.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://patch.msgid.link/20251128-upstream_vhub-v2-2-1fa66a5833c2@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the MCU halt and wait for halt procedures during
panthor_fw_unplug() as the MCU can be in a variety of states or the FW
may not even be loaded/initialized at all, the latter of which can lead
to a NULL pointer dereference.
It should be safe on unplug to just disable the MCU without waiting for
it to halt as it may not be able to.
Fixes: 514072549865 ("drm/panthor: Support GLB_REQ.STATE field for Mali-G1 GPUs")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251215203312.1084182-1-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
MMC_SDHCI_ESDHC_IMX requires ARCH_MXC despite also being used on
ARCH_S32, which results in unmet dependencies when compiling strictly
for ARCH_S32. Resolve this by adding ARCH_S32 as an alternative to
ARCH_MXC in the driver's dependencies.
Fixes: 5c4f00627c9a ("mmc: sdhci-esdhc-imx: add NXP S32G2 support")
Cc: stable@bvger.kernel.org
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On Xilinx/AMD platforms, the CD stable bit take slightly longer than
one second(about an additional 100ms) to assert after a host
controller reset. Although no functional failure observed with the
existing one second delay but to ensure reliable initialization, increase
the CD stable timeout to 2 seconds.
Fixes: e251709aaddb ("mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Remove commented-out dead code in netdev_close().
The code was previously commented out and is not needed.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Adrish Bora <adrishbora@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251215063102.1836-1-adrishbora@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch from the deprecated of_property_read_bool() to the common
device_property_read_bool() API. This makes the driver agnostic to
the underlying firmware interface (DT or ACPI) and simplifies the
logic.
Since the driver is no longer strictly dependent on Device Tree,
include <linux/mod_devicetable.h> directly for the struct
of_device_id definition, instead of relying on implicit inclusion
via <linux/of_irq.h>, which has been removed as it is unused.
Also rename apb_ctrl_get_devtree_data() to apb_ctrl_get_fw_data()
to better reflect the agnostic nature of the new implementation.
Signed-off-by: Julio Cesar Carvalho de Paula Souza <julio191096@gmail.com>
Link: https://patch.msgid.link/20251205112138.3431-1-julio191096@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix several instances where operators lacked spaces around them.
This improves readability and brings the driver closer to kernel
coding-style guidelines. No functional change.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://patch.msgid.link/20251205021417.2705864-3-vivek.balachandhar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The xe_sriov_vfio_migration_supported() function is type bool so
returning -EPERM means returning true. Return false instead.
Fixes: 17f22465c5a5 ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/aTLEZ4g-FD-iMQ2V@stanley.mountain
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Fix checkpatch error by removing trailing whitespace at line 2021.
Signed-off-by: Arjun Changla <arjunchangla7@gmail.com>
Link: https://patch.msgid.link/20251210084916.4000-1-arjunchangla7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The return value of sdio_alloc_irq() was not stored in status.
If sdio_alloc_irq() fails after rtw_drv_register_netdev() succeeds,
status remains _SUCCESS and the error path skips resource cleanup,
while rtw_drv_init() still returns success.
Store the return value of sdio_alloc_irq() in status and reuse the
existing error handling which relies on status.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Link: https://patch.msgid.link/20251208092730.262499-1-buaajxlj@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vf_migration_init_late() function is supposed to return zero on
success and negative error codes on failure. The error code
eventually gets propagated back to the probe() function and returned.
The problem is it's declared as type bool so it returns true on
error. Change it to type int instead.
Fixes: 2e2dab20dd66 ("drm/xe/vf: Enable VF migration only on supported GuC versions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/aTK9pwJ_roc8vpDi@stanley.mountain
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
checkpatch.pl reported multiple checks about unnecessary parentheses
when assigning the address of a struct member.
The '->' operator has higher precedence than '&', making the
parentheses redundant. This patch removes them to clean up the code.
Signed-off-by: Nazar Kletskii <nazar.kletskii@gmail.com>
Link: https://patch.msgid.link/20251204115332.21909-1-nazar.kletskii@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the rtl8723bs driver only uses the crypto library functions and
not the traditional crypto API, select only the required options. This
avoids unnecessary pulling in the full traditional crypto API.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251204061831.499181-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed a coding style issue - please, no space before tabs
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Link: https://patch.msgid.link/20251203163056.121915-1-suunj1331@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following checkpatch warning for all unnamed arguments:
WARNING: function definition argument should also have an identifier name
No functional changes.
Signed-off-by: Artur Stupa <arthur.stupa@gmail.com>
Link: https://patch.msgid.link/20251128083018.51315-1-arthur.stupa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, acpi_add_pm_notifier() registers wakeup sources under
ACPI companions of the devices affected by the handling of wakeup
events which goes against the rule that a struct acpi_device
can only be a parent of another struct acpi_device.
Moreover, it would be more logically consistent to register wakeup
sources under the devices affected by wakeup events handling which
would cause them to appear in more suitable places in sysfs and would
help to identify the devices they are associated with more easily.
Accordingly, update acpi_add_pm_notifier() to register wakeup sources
under the "target" devices directly instead of registering them under
the ACPI companions of those devices.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/1944126.tdWV9SEqCh@rafael.j.wysocki
|
|
Since pci_acpi_add_bus_pm_notifier() is only suitable for adding ACPI
PM notifiers to root buses, rename it to pci_acpi_add_root_pm_notifier()
and modify it to take an additional "root" argument, which is then used
for passing a PCI root bridge device pointer to acpi_add_pm_notifier().
That function uses it to populate the "dev" field in the context
structure attached to the ACPI device object that will receive the
ACPI "wake" notifications on behalf of the given PCI root bus. The
context structure in question is passed to pci_acpi_wake_bus(), so
the latter can be simplified quite a bit now because the target PCI
host bridge structure address can be derived from "dev".
No intentional functional impact.
This change will also facilitate a subsequent update related to the
registration of wakeup sources.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Kerneldoc comment fixup ]
Link: https://patch.msgid.link/2395263.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20251217023721.1684244-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://patch.msgid.link/20251216043210.1521722-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add driver for the Andes ATCSPI200 SPI controller.
Signed-off-by: CL Wang <cl634@andestech.com>
Link: https://patch.msgid.link/20251215132349.513843-3-cl634@andestech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add driver support for NXP XSPI controller.
XSPI is a flexible SPI host controller which supports up to
2 external devices (2 CS). It support Single/Dual/Quad/Octal
mode data transfer.
The difference between XSPI and Flexspi:
1.the register layout is total different.
2.XSPI support multiple independent execution environments
(EENVs) for HW virtualization with some limitations. Each EENV
has its own interrupt and its own set of programming registers
that exists in a specific offset range in the XSPI memory map.
The main environment (EENV0) address space contains all of the
registers for controlling EENV0 plus all of the general XSPI
control and programming registers. The register mnemonics for
the user environments (EENV1 to EENV4) have "_SUB_n" appended
to the mnemonic for the corresponding main-environment register.
Current driver based on EENV0, which means system already give
EENV0 right to linux.
This driver use SPI memory interface of the SPI framework to
issue flash memory operations. Tested this driver with UBIFS
and mtd_debug on NXP i.MX943 EVK board which has one spi nor
MT35XU512ABA flash. Now this driver has the following key
features:
- Support up to OCT DDR mode
- Support AHB read
- Support IP read and IP write
- Support two CS
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20251216-xspi-v7-2-282525220979@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver is migrated to use threaded IRQ since commit 5972eb05ca32
("spi: spi-mt65xx: Use threaded interrupt for non-SPIMEM transfer"), and
we almost always want to disable the interrupt line to avoid excess
interrupts while the threaded handler is processing SPI transfer.
Use IRQF_ONESHOT for that purpose.
In practice, we see MediaTek devices show SPI transfer timeout errors
when communicating with ChromeOS EC in certain scenarios, and with
IRQF_ONESHOT, the issue goes away.
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://patch.msgid.link/20251217101131.1975131-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When cqspi_request_mmap_dma() returns -EPROBE_DEFER after runtime PM
is enabled, the error path calls clk_disable_unprepare() on an already
disabled clock, causing an imbalance.
Use pm_runtime_get_sync() to increment the usage counter and resume the
device. This prevents runtime_suspend() from being invoked and causing
a double clock disable.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20251212072312.2711806-3-a-dutta@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add dev_err_probe() to log DMA request failures. This properly handles
-EPROBE_DEFER at debug level, reducing log spam during deferred probing.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Link: https://patch.msgid.link/20251212072312.2711806-2-a-dutta@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allows the buildbots to test compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20251217063229.38175-3-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
43935 11632 384 55951 da8f drivers/gpio/gpio-aggregator.o
After:
=====
text data bss dec hex filename
44191 11376 384 55951 da8f drivers/gpio/gpio-aggregator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ccb5155342ce6dbb89cfbad0687b448860d8e8f0.1765703044.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The compiler cannot workout if this is actually needed or not
so machines that will never need this code also get it.
For example:
m68k-linux-gnu-nm vmlinux | grep mt27
00135742 t of_find_mt2701_gpio
Add some ugly ifdef'ery to get rid of it.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20251214034045.4029590-1-daniel@thingy.jp
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Save some lines by consistently using dev_err_probe() when bailing out
with an error message.
Link: https://lore.kernel.org/r/20251212032646.49336-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
A probe callback that just returns 0 does the same as not having a probe
callback at all. So gpio_stub_drv_probe() can be dropped without side
effects.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20251210070255.484169-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Nilesh Javali <njavali@marvell.com> says:
Hello Martin,
Please apply the qla2xxx driver load flash FW mailbox support
along with miscellaneous bug fixes to the scsi tree at your
earliest convenience.
Link: https://patch.msgid.link/20251210101604.431868-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-13-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Kernel panic observed on system,
[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000
[5353358.825194] #PF: supervisor write access in kernel mode
[5353358.825195] #PF: error_code(0x0002) - not-present page
[5353358.825196] PGD 100006067 P4D 0
[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI
[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1
[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025
[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10
[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246
[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000
[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000
[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000
[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090
[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000
[5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000
[5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0
[5353358.825221] PKRU: 55555554
[5353358.825222] Call Trace:
[5353358.825223] <TASK>
[5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825232] ? sg_copy_buffer+0xc8/0x110
[5353358.825236] ? __die_body.cold+0x8/0xd
[5353358.825238] ? page_fault_oops+0x134/0x170
[5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110
[5353358.825244] ? exc_page_fault+0xa8/0x150
[5353358.825247] ? asm_exc_page_fault+0x22/0x30
[5353358.825252] ? memcpy_erms+0x6/0x10
[5353358.825253] sg_copy_buffer+0xc8/0x110
[5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx]
[5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]
Most routines in qla_bsg.c call bsg_done() only for success cases.
However a few invoke it for failure case as well leading to a double
free. Validate before calling bsg_done().
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-12-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Issue occurred during a continuous reboot test of several thousand
iterations specific to a fabric topo with dual mode target where it
sends a PLOGI/PRLI and then sends a LOGO. The initiator was also in the
process of discovery and sent a PLOGI to the switch. It then queried a
list of ports logged in via mbx 75h and the GPDB response indicated that
the target was logged in. This caused a mismatch in the states between
the driver and FW. Requery the FW for the state and proceed with the
rest of discovery process.
Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-11-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
System crash with the following signature
[154563.214890] nvme nvme2: NVME-FC{1}: controller connect complete
[154564.169363] qla2xxx [0000:b0:00.1]-3002:2: nvme: Sched: Set ZIO exchange threshold to 3.
[154564.169405] qla2xxx [0000:b0:00.1]-ffffff:2: SET ZIO Activity exchange threshold to 5.
[154565.539974] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 0080 0000.
[154565.545744] qla2xxx [0000:b0:00.1]-5013:2: RSCN database changed – 0078 00a0 0000.
[154565.545857] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.552760] qla2xxx [0000:b0:00.1]-11a2:2: FEC=enabled (data rate).
[154565.553079] BUG: kernel NULL pointer dereference, address: 00000000000000f8
[154565.553080] #PF: supervisor read access in kernel mode
[154565.553082] #PF: error_code(0x0000) - not-present page
[154565.553084] PGD 80000010488ab067 P4D 80000010488ab067 PUD 104978a067 PMD 0
[154565.553089] Oops: 0000 1 PREEMPT SMP PTI
[154565.553092] CPU: 10 PID: 858 Comm: qla2xxx_2_dpc Kdump: loaded Tainted: G OE ------- --- 5.14.0-503.11.1.el9_5.x86_64 #1
[154565.553096] Hardware name: HPE Synergy 660 Gen10/Synergy 660 Gen10 Compute Module, BIOS I43 09/30/2024
[154565.553097] RIP: 0010:qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553141] Code: 00 00 e8 58 a3 ec d4 49 89 e9 ba 12 20 00 00 4c 89 e6 49 c7 c0 00 ee a8 c0 48 c7 c1 66 c0 a9 c0 bf 00 80 00 10 e8 15 69 00 00 <4c> 8b 8d f8 00 00 00 4d 85 c9 74 35 49 8b 84 24 00 19 00 00 48 8b
[154565.553143] RSP: 0018:ffffb4dbc8aebdd0 EFLAGS: 00010286
[154565.553145] RAX: 0000000000000000 RBX: ffff8ec2cf0908d0 RCX: 0000000000000002
[154565.553147] RDX: 0000000000000000 RSI: ffffffffc0a9c896 RDI: ffffb4dbc8aebd47
[154565.553148] RBP: 0000000000000000 R08: ffffb4dbc8aebd45 R09: 0000000000ffff0a
[154565.553150] R10: 0000000000000000 R11: 000000000000000f R12: ffff8ec2cf0908d0
[154565.553151] R13: ffff8ec2cf090900 R14: 0000000000000102 R15: ffff8ec2cf084000
[154565.553152] FS: 0000000000000000(0000) GS:ffff8ed27f800000(0000) knlGS:0000000000000000
[154565.553154] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[154565.553155] CR2: 00000000000000f8 CR3: 000000113ae0a005 CR4: 00000000007706f0
[154565.553157] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[154565.553158] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[154565.553159] PKRU: 55555554
[154565.553160] Call Trace:
[154565.553162] <TASK>
[154565.553165] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553172] ? show_trace_log_lvl+0x1c4/0x2df
[154565.553177] ? qla_fab_async_scan.part.0+0x40b/0x870 [qla2xxx]
[154565.553215] ? __die_body.cold+0x8/0xd
[154565.553218] ? page_fault_oops+0x134/0x170
[154565.553223] ? snprintf+0x49/0x70
[154565.553229] ? exc_page_fault+0x62/0x150
[154565.553238] ? asm_exc_page_fault+0x22/0x30
Check for sp being non NULL before freeing any associated memory
Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-10-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
System crash seen during load/unload test in a loop,
[61110.449331] qla2xxx [0000:27:00.0]-0042:0: Disabled MSI-X.
[61110.467494] =============================================================================
[61110.467498] BUG qla2xxx_srbs (Tainted: G OE -------- --- ): Objects remaining in qla2xxx_srbs on __kmem_cache_shutdown()
[61110.467501] -----------------------------------------------------------------------------
[61110.467502] Slab 0x000000000ffc8162 objects=51 used=1 fp=0x00000000e25d3d85 flags=0x57ffffc0010200(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[61110.467509] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467513] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467515] Call Trace:
[61110.467516] <TASK>
[61110.467519] dump_stack_lvl+0x34/0x48
[61110.467526] slab_err.cold+0x53/0x67
[61110.467534] __kmem_cache_shutdown+0x16e/0x320
[61110.467540] kmem_cache_destroy+0x51/0x160
[61110.467544] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467607] ? __do_sys_delete_module.constprop.0+0x178/0x280
[61110.467613] ? syscall_trace_enter.constprop.0+0x145/0x1d0
[61110.467616] ? do_syscall_64+0x5c/0x90
[61110.467619] ? exc_page_fault+0x62/0x150
[61110.467622] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[61110.467626] </TASK>
[61110.467627] Disabling lock debugging due to kernel taint
[61110.467635] Object 0x0000000026f7e6e6 @offset=16000
[61110.467639] ------------[ cut here ]------------
[61110.467639] kmem_cache_destroy qla2xxx_srbs: Slab cache still has objects when called from qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467659] WARNING: CPU: 53 PID: 455206 at mm/slab_common.c:520 kmem_cache_destroy+0x14d/0x160
[61110.467718] CPU: 53 PID: 455206 Comm: rmmod Kdump: loaded Tainted: G B OE -------- --- 5.14.0-284.11.1.el9_2.x86_64 #1
[61110.467720] Hardware name: HPE ProLiant DL385 Gen10 Plus v2/ProLiant DL385 Gen10 Plus v2, BIOS A42 08/17/2023
[61110.467721] RIP: 0010:kmem_cache_destroy+0x14d/0x160
[61110.467724] Code: 99 7d 07 00 48 89 ef e8 e1 6a 07 00 eb b3 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 70 fc 66 90 48 c7 c7 f8 ef a1 90 e8 e1 ed 7c 00 <0f> 0b eb 93 c3 cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 55 48 89
[61110.467725] RSP: 0018:ffffa304e489fe80 EFLAGS: 00010282
[61110.467727] RAX: 0000000000000000 RBX: ffffffffc0d9a860 RCX: 0000000000000027
[61110.467729] RDX: ffff8fd5ff9598a8 RSI: 0000000000000001 RDI: ffff8fd5ff9598a0
[61110.467730] RBP: ffff8fb6aaf78700 R08: 0000000000000000 R09: 0000000100d863b7
[61110.467731] R10: ffffa304e489fd20 R11: ffffffff913bef48 R12: 0000000040002000
[61110.467731] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[61110.467733] FS: 00007f64c89fb740(0000) GS:ffff8fd5ff940000(0000) knlGS:0000000000000000
[61110.467734] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[61110.467735] CR2: 00007f0f02bfe000 CR3: 00000020ad6dc005 CR4: 0000000000770ee0
[61110.467736] PKRU: 55555554
[61110.467737] Call Trace:
[61110.467738] <TASK>
[61110.467739] qla2x00_module_exit+0x93/0x99 [qla2xxx]
[61110.467755] ? __do_sys_delete_module.constprop.0+0x178/0x280
Free sp in the error path to fix the crash.
Fixes: f352eeb75419 ("scsi: qla2xxx: Add ability to use GPNFT/GNNFT for RSCN handling")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-9-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
System crash seen during load/unload test in a loop.
[105954.384919] RBP: ffff914589838dc0 R08: 0000000000000000 R09: 0000000000000086
[105954.384920] R10: 000000000000000f R11: ffffa31240904be5 R12: ffff914605f868e0
[105954.384921] R13: ffff914605f86910 R14: 0000000000008010 R15: 00000000ddb7c000
[105954.384923] FS: 0000000000000000(0000) GS:ffff9163fec40000(0000) knlGS:0000000000000000
[105954.384925] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[105954.384926] CR2: 000055d31ce1d6a0 CR3: 0000000119f5e001 CR4: 0000000000770ee0
[105954.384928] PKRU: 55555554
[105954.384929] Call Trace:
[105954.384931] <IRQ>
[105954.384934] qla24xx_sp_unmap+0x1f3/0x2a0 [qla2xxx]
[105954.384962] ? qla_async_scan_sp_done+0x114/0x1f0 [qla2xxx]
[105954.384980] ? qla24xx_els_ct_entry+0x4de/0x760 [qla2xxx]
[105954.384999] ? __wake_up_common+0x80/0x190
[105954.385004] ? qla24xx_process_response_queue+0xc2/0xaa0 [qla2xxx]
[105954.385023] ? qla24xx_msix_rsp_q+0x44/0xb0 [qla2xxx]
[105954.385040] ? __handle_irq_event_percpu+0x3d/0x190
[105954.385044] ? handle_irq_event+0x58/0xb0
[105954.385046] ? handle_edge_irq+0x93/0x240
[105954.385050] ? __common_interrupt+0x41/0xa0
[105954.385055] ? common_interrupt+0x3e/0xa0
[105954.385060] ? asm_common_interrupt+0x22/0x40
The root cause of this was that there was a free (dma_free_attrs) in the
interrupt context. There was a device discovery/fabric scan in
progress. A module unload was issued which set the UNLOADING flag. As
part of the discovery, after receiving an interrupt a work queue was
scheduled (which involved a work to be queued). Since the UNLOADING
flag is set, the work item was not allocated and the mapped memory had
to be freed. The free occurred in interrupt context leading to system
crash. Delay the driver unload until the fabric scan is complete to
avoid the crash.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/202512090414.07Waorz0-lkp@intel.com/
Fixes: 783e0dc4f66a ("qla2xxx: Check for device state before unloading the driver.")
Cc: stable@vger.kernel.org
Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-8-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Tape device doesn't show up after RSCNs. To fix this, remove tape
device specific checks which allows recovery of tape devices.
Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251210101604.431868-7-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
