| Age | Commit message (Collapse) | Author |
|---|
|
The dev3_register_work delayed work item is initialized within
alps_reconnect() and scheduled upon receipt of the first bare
PS/2 packet from an external PS/2 device connected to the ALPS
touchpad. During device detachment, the original implementation
calls flush_workqueue() in psmouse_disconnect() to ensure
completion of dev3_register_work. However, the flush_workqueue()
in psmouse_disconnect() only blocks and waits for work items that
were already queued to the workqueue prior to its invocation. Any
work items submitted after flush_workqueue() is called are not
included in the set of tasks that the flush operation awaits.
This means that after flush_workqueue() has finished executing,
the dev3_register_work could still be scheduled. Although the
psmouse state is set to PSMOUSE_CMD_MODE in psmouse_disconnect(),
the scheduling of dev3_register_work remains unaffected.
The race condition can occur as follows:
CPU 0 (cleanup path) | CPU 1 (delayed work)
psmouse_disconnect() |
psmouse_set_state() |
flush_workqueue() | alps_report_bare_ps2_packet()
alps_disconnect() | psmouse_queue_work()
kfree(priv); // FREE | alps_register_bare_ps2_mouse()
| priv = container_of(work...); // USE
| priv->dev3 // USE
Add disable_delayed_work_sync() in alps_disconnect() to ensure
that dev3_register_work is properly canceled and prevented from
executing after the alps_data structure has been deallocated.
This bug is identified by static analysis.
Fixes: 04aae283ba6a ("Input: ALPS - do not mix trackstick and external PS/2 mouse data")
Cc: stable@kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/b57b0a9ccca51a3f06be141bfc02b9ffe69d1845.1765939397.git.duoming@zju.edu.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The hv_sleep_notifiers_register() and hv_machine_power_off() functions are
only called and declared on x86, but cause a warning on arm64:
drivers/hv/mshv_common.c:210:6: error: no previous prototype for 'hv_sleep_notifiers_register' [-Werror=missing-prototypes]
210 | void hv_sleep_notifiers_register(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/hv/mshv_common.c:224:6: error: no previous prototype for 'hv_machine_power_off' [-Werror=missing-prototypes]
224 | void hv_machine_power_off(void)
| ^~~~~~~~~~~~~~~~~~~~
Hide both inside of an #ifdef block.
Fixes: f0be2600ac55 ("mshv: Use reboot notifier to configure sleep state")
Fixes: 615a6e7d83f9 ("mshv: Cleanly shutdown root partition with MSHV")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Intel Amston Lake SoCs with IBECC (In-Band ECC) capability share the same
IBECC registers as Alder Lake-N SoCs. Add two new compute die IDs for
Amston Lake SoC products to enable EDAC support.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Jianfeng Gao <jianfeng.gao@intel.com>
Link: https://patch.msgid.link/20251124065457.3630949-2-qiuxu.zhuo@intel.com
|
|
The snprintf() can't really overflow because we're writing a max of 42
bytes to a PAGE_SIZE buffer. But my static checker complains because
the limit calculation doesn't take the first 11 space characters that
we wrote into the buffer into consideration. Fix this for the sake of
correctness even though it doesn't affect runtime.
Also delete an earlier "space -= n;" which was not used.
Fixes: 68d086f89b80 ("i5400_edac: improve debug messages to better represent the filled memory")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/ccd06b91748e7ed8e33eeb2ff1e7b98700879304.1765290801.git.dan.carpenter@linaro.org
|
|
The snprintf() can't really overflow because we're writing a max of 42
bytes to a PAGE_SIZE buffer. But the limit calculation doesn't take
the first 11 bytes that we wrote into consideration so the limit is
not correct. Just fix it for correctness even though it doesn't
affect runtime.
Fixes: 64e1fdaf55d6 ("i5000_edac: Fix the logic that retrieves memory information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/07cd652c51e77aad5a8350e1a7cd9407e5bbe373.1765290801.git.dan.carpenter@linaro.org
|
|
The page size used for device might in some cases be smaller than
PAGE_SIZE what results in a negative shift when calculating the number of
host pages in PAGE_SIZE for a debug log. Remove the debug line together
with the calculation.
Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation")
Link: https://patch.msgid.link/r/20251210173656.8180-1-mrgolin@amazon.com
Reviewed-by: Tom Sela <tomsela@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix all (30+) kernel-doc warnings in rtrs.h and rtrs-pri.h. The changes
are:
- add ending ':' to enum member names
- change enum description separators from '-' to ':'
- add "struct" keyword to kernel-doc for structs where missing
- fix enum names in enum rtrs_clt_con_type
- add a '-' separator and drop the "()" in enum rtrs_clt_con_type
- convert struct rtrs_addr to kernel-doc format
- add missing struct member descriptions for struct rtrs_attrs
Link: https://patch.msgid.link/r/20251129022146.1498273-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
irdma_net_event() should not dereference anything from "neigh" (alias
"ptr") until it has checked that the event is NETEVENT_NEIGH_UPDATE.
Other events come with different structures pointed to by "ptr" and they
may be smaller than struct neighbour.
Move the read of neigh->dev under the NETEVENT_NEIGH_UPDATE case.
The bug is mostly harmless, but it triggers KASAN on debug kernels:
BUG: KASAN: stack-out-of-bounds in irdma_net_event+0x32e/0x3b0 [irdma]
Read of size 8 at addr ffffc900075e07f0 by task kworker/27:2/542554
CPU: 27 PID: 542554 Comm: kworker/27:2 Kdump: loaded Not tainted 5.14.0-630.el9.x86_64+debug #1
Hardware name: [...]
Workqueue: events rt6_probe_deferred
Call Trace:
<IRQ>
dump_stack_lvl+0x60/0xb0
print_address_description.constprop.0+0x2c/0x3f0
print_report+0xb4/0x270
kasan_report+0x92/0xc0
irdma_net_event+0x32e/0x3b0 [irdma]
notifier_call_chain+0x9e/0x180
atomic_notifier_call_chain+0x5c/0x110
rt6_do_redirect+0xb91/0x1080
tcp_v6_err+0xe9b/0x13e0
icmpv6_notify+0x2b2/0x630
ndisc_redirect_rcv+0x328/0x530
icmpv6_rcv+0xc16/0x1360
ip6_protocol_deliver_rcu+0xb84/0x12e0
ip6_input_finish+0x117/0x240
ip6_input+0xc4/0x370
ipv6_rcv+0x420/0x7d0
__netif_receive_skb_one_core+0x118/0x1b0
process_backlog+0xd1/0x5d0
__napi_poll.constprop.0+0xa3/0x440
net_rx_action+0x78a/0xba0
handle_softirqs+0x2d4/0x9c0
do_softirq+0xad/0xe0
</IRQ>
Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions")
Link: https://patch.msgid.link/r/20251127143150.121099-1-mschmidt@redhat.com
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Check queue size during kernel CQ creation to prevent overflow of u32.
Fixes: bec127e45d9f ("RDMA/mana_ib: create kernel-level CQs")
Link: https://patch.msgid.link/r/1761213780-5457-1-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Luigi reported that retriggering a posted MSI interrupt does not work
correctly.
The reason is that the retrigger happens at the vector domain by sending an
IPI to the actual vector on the target CPU. That works correctly exactly
once because the posted MSI interrupt chip does not issue an EOI as that's
only required for the posted MSI notification vector itself.
As a consequence the vector becomes stale in the ISR, which not only
affects this vector but also any lower priority vector in the affected
APIC because the ISR bit is not cleared.
Luigi proposed to set the vector in the remap PIR bitmap and raise the
posted MSI notification vector. That works, but that still does not cure a
related problem:
If there is ever a stray interrupt on such a vector, then the related
APIC ISR bit becomes stale due to the lack of EOI as described above.
Unlikely to happen, but if it happens it's not debuggable at all.
So instead of playing games with the PIR, this can be actually solved
for both cases by:
1) Keeping track of the posted interrupt vector handler state
2) Implementing a posted MSI specific irq_ack() callback which checks that
state. If the posted vector handler is inactive it issues an EOI,
otherwise it delegates that to the posted handler.
This is correct versus affinity changes and concurrent events on the posted
vector as the actual handler invocation is serialized through the interrupt
descriptor lock.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Reported-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Luigi Rizzo <lrizzo@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251125214631.044440658@linutronix.de
Closes: https://lore.kernel.org/lkml/20251124104836.3685533-1-lrizzo@google.com
|
|
There are off-by-one bugs when configuring RSS hash key and lookup
table, causing out-of-bounds reads to memory [1] and out-of-bounds
writes to device registers.
Before commit 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS"),
the loop upper bounds were:
i <= I40E_VFQF_{HKEY,HLUT}_MAX_INDEX
which is safe since the value is the last valid index.
That commit changed the bounds to:
i <= adapter->rss_{key,lut}_size / 4
where `rss_{key,lut}_size / 4` is the number of dwords, so the last
valid index is `(rss_{key,lut}_size / 4) - 1`. Therefore, using `<=`
accesses one element past the end.
Fix the issues by using `<` instead of `<=`, ensuring we do not exceed
the bounds.
[1] KASAN splat about rss_key_size off-by-one
BUG: KASAN: slab-out-of-bounds in iavf_config_rss+0x619/0x800
Read of size 4 at addr ffff888102c50134 by task kworker/u8:6/63
CPU: 0 UID: 0 PID: 63 Comm: kworker/u8:6 Not tainted 6.18.0-rc2-enjuk-tnguy-00378-g3005f5b77652-dirty #156 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: iavf iavf_watchdog_task
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x1a0
iavf_config_rss+0x619/0x800
iavf_watchdog_task+0x2be7/0x3230
process_one_work+0x7fd/0x1420
worker_thread+0x4d1/0xd40
kthread+0x344/0x660
ret_from_fork+0x249/0x320
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 63:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_noprof+0x246/0x6f0
iavf_watchdog_task+0x28fc/0x3230
process_one_work+0x7fd/0x1420
worker_thread+0x4d1/0xd40
kthread+0x344/0x660
ret_from_fork+0x249/0x320
ret_from_fork_asm+0x1a/0x30
The buggy address belongs to the object at ffff888102c50100
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes to the right of
allocated 52-byte region [ffff888102c50100, ffff888102c50134)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x102c50
flags: 0x200000000000000(node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000000 ffff8881000418c0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080200020 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888102c50000: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
ffff888102c50080: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
>ffff888102c50100: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc
^
ffff888102c50180: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
ffff888102c50200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The maximum number of descriptors supported by the hardware is
hardware-dependent and can be retrieved using
i40e_get_max_num_descriptors(). Move this function to a shared header
and use it when checking for valid ring_len parameter rather than using
hardcoded value.
By fixing an over-acceptance issue, behavior change could be seen where
ring_len could now be rejected while configuring rx and tx queues if its
size is larger than the hardware-dependent maximum number of
descriptors.
Fixes: 55d225670def ("i40e: add validation for ring_len param")
Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add service task schedule to set_rx_mode.
In some cases there are error messages printed out in PTP application
(ptp4l):
ptp4l[13848.762]: port 1 (ens2f3np3): received SYNC without timestamp
ptp4l[13848.825]: port 1 (ens2f3np3): received SYNC without timestamp
ptp4l[13848.887]: port 1 (ens2f3np3): received SYNC without timestamp
This happens when service task would not run immediately after
set_rx_mode, and we need it for setup tasks. This service task checks, if
PTP RX packets are hung in firmware, and propagate correct settings such
as multicast address for IEEE 1588 Precision Time Protocol.
RX timestamping depends on some of these filters set. Bug happens only
with high PTP packets frequency incoming, and not every run since
sometimes service task is being ran from a different place immediately
after starting ptp4l.
Fixes: 0e4425ed641f ("i40e: fix: do not sleep in netdev_ops")
Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce a bus specific probe, remove and shutdown function. For now
this only allows to get rid of a cast of the generic device to a
tee_client device in the drivers and changes the remove prototype to
return void---a non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device_driver callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all tee_client drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Similar to platform drivers (and others) create dedicated register and
unregister functions and a macro to simplify modules that only need to
handle driver registration in their init and exit handlers.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
amdxdna_flush() was introduced to ensure that the device does not access
a process address space after it has been freed. However, this is no
longer necessary because the driver now increments the mm reference count
when a command is submitted and decrements it only after the command has
completed. This guarantees that the process address space remains valid
for the entire duration of command execution. Remove amdxdna_flush to
simplify the teardown path.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251216031311.2033399-1-lizhi.hou@amd.com
|
|
With the RAPL PMU addition, there is a recursive locking when CPU online
callback function calls rapl_package_add_pmu(). Here cpu_hotplug_lock
is already acquired by cpuhp_thread_fun() and rapl_package_add_pmu()
tries to acquire again.
<4>[ 8.197433] ============================================
<4>[ 8.197437] WARNING: possible recursive locking detected
<4>[ 8.197440] 6.19.0-rc1-lgci-xe-xe-4242-05b7c58b3367dca84+ #1 Not tainted
<4>[ 8.197444] --------------------------------------------
<4>[ 8.197447] cpuhp/0/20 is trying to acquire lock:
<4>[ 8.197450] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197463]
but task is already holding lock:
<4>[ 8.197466] ffffffff83487870 (cpu_hotplug_lock){++++}-{0:0}, at:
cpuhp_thread_fun+0x6d/0x290
<4>[ 8.197477]
other info that might help us debug this:
<4>[ 8.197480] Possible unsafe locking scenario:
<4>[ 8.197483] CPU0
<4>[ 8.197485] ----
<4>[ 8.197487] lock(cpu_hotplug_lock);
<4>[ 8.197490] lock(cpu_hotplug_lock);
<4>[ 8.197493]
*** DEADLOCK ***
..
..
<4>[ 8.197542] __lock_acquire+0x146e/0x2790
<4>[ 8.197548] lock_acquire+0xc4/0x2c0
<4>[ 8.197550] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197556] cpus_read_lock+0x41/0x110
<4>[ 8.197558] ? rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197561] rapl_package_add_pmu+0x37/0x370 [intel_rapl_common]
<4>[ 8.197565] rapl_cpu_online+0x85/0x87 [intel_rapl_msr]
<4>[ 8.197568] ? __pfx_rapl_cpu_online+0x10/0x10 [intel_rapl_msr]
<4>[ 8.197570] cpuhp_invoke_callback+0x41f/0x6c0
<4>[ 8.197573] ? cpuhp_thread_fun+0x6d/0x290
<4>[ 8.197575] cpuhp_thread_fun+0x1e2/0x290
<4>[ 8.197578] ? smpboot_thread_fn+0x26/0x290
<4>[ 8.197581] smpboot_thread_fn+0x12f/0x290
<4>[ 8.197584] ? __pfx_smpboot_thread_fn+0x10/0x10
<4>[ 8.197586] kthread+0x11f/0x250
<4>[ 8.197589] ? __pfx_kthread+0x10/0x10
<4>[ 8.197592] ret_from_fork+0x344/0x3a0
<4>[ 8.197595] ? __pfx_kthread+0x10/0x10
<4>[ 8.197597] ret_from_fork_asm+0x1a/0x30
<4>[ 8.197604] </TASK>
Fix this issue in the same way as rapl powercap package domain is added
from the same CPU online callback by introducing another interface which
doesn't call cpus_read_lock(). Add rapl_package_add_pmu_locked() and
rapl_package_remove_pmu_locked() which don't call cpus_read_lock().
Fixes: 748d6ba43afd ("powercap: intel_rapl: Enable MSR-based RAPL PMU support")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/linux-pm/5427ede1-57a0-43d1-99f3-8ca4b0643e82@intel.com/T/#u
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251217153455.3560176-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 506aa8b02a8d6 ("dma-fence: Add safe access helpers and document
the rules") details the dma-fence safe access rules. The most common
culprit is that drm_sched_fence_get_timeline_name may race with
group_free_queue.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org # v6.17+
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251204174545.399059-1-olvaffe@gmail.com
|
|
The devm_platform_get_and_ioremap_resource() function never returns
NULL, it returns error pointers. Fix the error checking to match.
Fixes: 25e95d763176 ("serial: 8250: Add Loongson uart driver support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aSsIa3KdAlXh5uQC@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The change that restores sysfs fwnode information does it only for OF cases.
Update the fix to cover all possible types of fwnodes.
Fixes: d36f0e9a0002 ("serial: core: restore of_node information in sysfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251127163650.2942075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The motivation is stop using the callback .shutdown in
qca_serdev_driver.driver to make it possible to drop that.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9682d206a1f375cd98e7dbfce4f1a83b4b345178.1765526117.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This saves a cast in the driver. The motivation is stop using the callback
.shutdown in qca_serdev_driver.driver to make it possible to drop that.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/261a3384e25c4837d4efee87958805f15d7d4e3c.1765526117.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This saves a cast in the driver. The motivation is stop using the callback
.shutdown in qca_serdev_driver.driver to make it possible to drop that.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/42ae20ba70ff6fbbbd9b846ac9acd0f7d58451b0.1765526117.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To prepare serdev driver to migrate away from struct device_driver::shutdown
(and then eventually remove that callback) create a serdev driver shutdown
callback and migration code to keep the existing behaviour. Note this
introduces a warning for each driver at register time that isn't converted
yet to that callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/ab518883e3ed0976a19cb5b5b5faf42bd3a655b7.1765526117.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for RZ/G3E RSCI. RSCI IP found on the RZ/G3E SoC is similar
to RZ/T2H, but it has a 32-stage FIFO. It has 6 clocks(5 module clocks
+ 1 external clock) instead of 3 clocks(2 module clocks + 1 external
clock) on T2H, has 6 irqs compared to 4 on RZ/T2H and has multiple resets.
Add support for the hardware flow control.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-18-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename rsci_early_console_setup()->rsci_rzt2h_early_console_setup(),
the early_console data of_sci_rsci_data->of_rsci_rzt2h_data and the
port_params rsci_port_params->rsci_rzt2h_port_params to support RZ/G3E
RSCI that uses different data and callback().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-17-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add finish_console_write() callback as RZ/G3E RSCI IP needs special
handling compared to other SoCs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-16-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make the function sci_scbrr_calc() public for code reuse to support RZ/G3E
RSCI IP.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-15-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
RZ/G3E RSCI has 6 clocks (5 module clocks + 1 external clock). Add
support for the module clocks.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-14-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RZ/G3E RSCI IP has 32-stage FIFO compared to 16-stage FIFO on RZ/T2H.
Add RSCI_PORT_SCIF32 port ID to differentiate it from RZ/T2H RSCI and
update sci_is_rsci_type() and sci_is_fifo_type()
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-13-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename port SCI_PORT_RSCI->RSCI_PORT_SCIF16 to differentiate it from
RZ/G3E port that has 32-stage FIFO.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-12-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add sci_is_rsci_type() for RSCI port type. This will simplify the code
when the support added for RSCI_PORT_SCIF32 private PORT type.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-11-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace devm_*_get_exclusive()->devm_*_array_get_exclusive() to support
existing SoCs along with RZ/G3E as RZ/G3E has 2 resets.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-10-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop the unused TDR register-related macros.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-9-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop unused macro DCR and its bit definition.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-8-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Shorten the number lines in sci_init_clocks() by fitting the error
messages within an 100-character length limit.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-7-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Drop rsci_clear_SCxSR by reusing rsci_clear_CFC() as the contents of
both functions are the same.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-6-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ports that support FIFO has fifosize > 1. Replace checking the port type
with fifosize for device file{create, remove}.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-5-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The rtrg variable is populated in sci_init_single() for RZ/T2H. Add
set_rtrg() callback for setting the rtrg value.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-4-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The RZ/T2H RSCI has 16-stage FIFO. Like other SoCs, set the default
rx_trigger as the fifosize.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251129164325.209213-3-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing descriptions for write_work and tty_for_write_work
members in struct n_hdlc.
This fixes the following warnings:
drivers/tty/n_hdlc.c: warning: Function parameter or member
'write_work' not described in 'n_hdlc'
drivers/tty/n_hdlc.c: warning: Function parameter or member
'tty_for_write_work' not described in 'n_hdlc'
Signed-off-by: Bartlomiej Kubik <kubik.bartlomiej@gmail.com>
Link: https://patch.msgid.link/20251202063748.1210359-1-kubik.bartlomiej@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify the probe() code by using dev_err_probe().
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://patch.msgid.link/20251216193726.55449-4-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add defines for better readability of the Indexed Control Register (ICR)
access. In enhanced mode SCR and LSR registers are used for ICR access.
The behavior of these register is different in this mode and that shall
be documented with dedicated defines.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://patch.msgid.link/20251216193726.55449-3-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Andy and Ilpo suggested to add missing includes, because the code shall
not rely on indirect includes. Add missing includes and remove one
include, which only enabled indirect includes.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://patch.msgid.link/20251216193726.55449-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Z125 define is not used anywhere, thus removed. Also used a
more specific name for the maximum number of ports per unit and
removed the duplicated define MAX_PORTS
Reviewed-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Signed-off-by: Filip Jensen <dev-Felipe.Jensen@duagon.com>
Link: https://patch.msgid.link/20251210164804.94801-2-dev-Felipe.Jensen@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit bfb24564b5fd ("tty: vt/keyboard: use __free()"), builds
using asm goto for put_user() and get_user() with a version of clang
older than 17 error with:
drivers/tty/vt/keyboard.c:1709:7: error: cannot jump from this asm goto statement to one of its possible targets
if (put_user(asize, &a->kb_cnt))
^
...
arch/arm64/include/asm/uaccess.h:298:2: note: expanded from macro '__put_mem_asm'
asm goto( \
^
drivers/tty/vt/keyboard.c:1687:7: note: possible target of asm goto statement
if (put_user(asize, &a->kb_cnt))
^
...
arch/arm64/include/asm/uaccess.h:342:2: note: expanded from macro '__raw_put_user'
__rpu_failed: \
^
drivers/tty/vt/keyboard.c:1697:23: note: jump exits scope of variable with __attribute__((cleanup))
void __free(kfree) *buf = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacruc),
^
drivers/tty/vt/keyboard.c:1671:33: note: jump bypasses initialization of variable with __attribute__((cleanup))
struct kbdiacr __free(kfree) *dia = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacr),
^
Prior to a fix to clang's scope checker in clang 17 [1], all labels in a
function were validated as potential targets of all asm gotos in a
function, regardless of whether they actually were a target of an asm
goto call, resulting in false positive errors about skipping over
variables marked with the cleanup attribute.
To workaround this error, split up the bodies of the case statements in
vt_do_diacrit() into their own functions so that the scope checker does
not trip up on the multiple instances of __free().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509091702.Oc7eCRDw-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511241835.EA8lShgH-lkp@intel.com/
Link: https://github.com/llvm/llvm-project/commit/f023f5cdb2e6c19026f04a15b5a935c041835d14 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251125-tty-vt-keyboard-wa-clang-scope-check-error-v1-1-f5a5ea55c578@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move pm_runtime_set_active() call earlier in probe to simplify error
handling and add proper error checking to ensure the device is marked
as active before any runtime PM operations can occur.
Additionally, replace the const struct dev_pm_ops declaration with
_DEFINE_DEV_PM_OPS macro for better consistency with modern kernel PM
patterns.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251104145433.2316165-3-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add error checking for clk_prepare_enable() calls in
dw8250_runtime_resume(). Currently if either clock fails to enable,
the function returns success while leaving clocks in inconsistent state.
This change implements comprehensive error handling by checking the return
values of both clk_prepare_enable() calls. If the second clock enable
operation fails after the first clock has already been successfully
enabled, the code now properly cleans up by disabling and unpreparing
the first clock before returning. The error code is then propagated to
the caller, ensuring that clock enable failures are properly reported
rather than being silently ignored.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251104145433.2316165-2-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Actually test the documented expectation of dma_fence_wait() instead of
comming up with a mock_wait implementation which uses undocumented
and non standard return codes and behavior.
Additional to that increase the timeout to one second, otherwise the
test case is a bit unreliable.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/346e3df8-5f3a-4394-9d90-4ba107294161@ursulin.net
|
|
When clk_bulk_prepare_enable() fails, the error path jumps to
err_resetc_assert, skipping clk_bulk_put_all() and leaking the
clock references acquired by clk_bulk_get_all().
Add err_clk_put_all label to properly release clock resources
in all error paths.
Found via static analysis and code review.
Fixes: c0c61471ef86 ("usb: dwc3: of-simple: Convert to bulk clk API")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251211064937.2360510-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
