| Age | Commit message (Collapse) | Author |
|---|
|
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count, fix
intel_dp_dsc_get_slice_count() accordingly.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-4-imre.deak@intel.com
|
|
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
|
|
eDP 1.5 supports all the slice counts reported via DP_DSC_SLICE_CAP_1,
so adjust drm_dp_dsc_sink_max_slice_count() accordingly.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-2-imre.deak@intel.com
|
|
On 32‑bit systems, phys_addr_t is defined as u32. However, parisc
expects physical addresses to be 64‑bit values so it can store a
validity bit in the upper byte.
Resolve this mismatch by casting the physical address to unsigned
long, ensuring it is treated as a 64‑bit value where required. This
fixes the failure to start block device drivers on the C3700
platform, as reported by Guenter.
QEMU command line to reproduce the issue (with Debian SID as rootfs):
qemu-system-hppa -machine C3700 \
-kernel arch/parisc/boot/bzImage \
-append "console=ttyS0 \
root=/dev/sda rw rootwait panic=-1" \
-nographic \
-device lsi53c895a \
-drive file=rootfs-hppa.img,if=none,format=raw,id=hd0 \
-device scsi-hd,drive=hd0
Fixes: 96ddf2ef58ec ("parisc: Convert DMA map_page to map_phys interface")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/b184f1bf-96dc-4546-8512-9cba5ecb58f7@roeck-us.net/
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[mszyprow: dropped the lpa() macro removal]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251218-fix-parisc-conversion-v1-1-4a04d26b0168@nvidia.com
|
|
Commit 33729a5fc0ca ("iommu/io-pgtable-arm: Remove split on unmap
behavior") did away with the treatment of partial unmaps of huge IOPTEs.
In the case of Panthor, that means an attempt to run a VM_BIND unmap
operation on a memory region whose start address and size aren't 2MiB
aligned, in the event it intersects with a huge page, would lead to ARM
IOMMU management code to fail and a warning being raised.
Presently, and for lack of a better alternative, it's best to have
Panthor handle partial unmaps at the driver level, by unmapping entire
huge pages and remapping the difference between them and the requested
unmap region.
This could change in the future when the VM_BIND uAPI is expanded to
enforce huge page alignment and map/unmap operational constraints that
render this code unnecessary.
When a partial unmap for a huge PTE is attempted, we also need to expand
the locked region to encompass whole huge pages.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251217213252.677020-2-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Merge series from Alain Volmat <alain.volmat@foss.st.com>:
The series fixes a stability issue when dealing with <8bpw
transfers, as well as enforce an error if the DMA information
provided within the DT are incorrect.
Performance enhancement is also provided by allowing a polling
mode which is triggered when the transfer is so short that
polling mode transfer would lead to faster transfer than
if it was done in a interrupt driven manner.
|
|
Correct the read register for the setting of max input size and
interrupt delay.
Fixes: 22da60f0304b ("HID: Intel-thc-hid: Intel-thc: Introduce interrupt delay control")
Fixes: 45e92a093099 ("HID: Intel-thc-hid: Intel-thc: Introduce max input size control")
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Some VTL-class touchpads (e.g. TOPS0102:00 35CC:0104) intermittently
fail to release a finger contact. A previous slot remains logically
active, accompanied by stale BTN_TOOL_DOUBLETAP state, causing
gestures to stay latched and resulting in stuck two-finger
scrolling and false right-clicks.
Apply MT_QUIRK_STICKY_FINGERS to handle the unreleased contact correctly.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1225
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Some systems have enabled ISH without any sensors. In this case sending
HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware
reset on subsequent enumeration after S3/S4 resume.
The enum_devices_done flag was not reset before sending the
HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as
after S3/S4 resume), this flag retains its previous true value, causing the
wait loop to be skipped and returning prematurely to hid_ishtp_cl_init().
If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device
descriptors and sets init_done to true. When the delayed enumeration
response arrives with init_done already true, the driver treats it as a bad
packet and triggers an ISH hardware reset.
Set enum_devices_done to false before sending the enumeration command,
consistent with similar functions like ishtp_get_hid_descriptor() and
ishtp_get_report_descriptor() which reset their respective flags.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Save the number of entries in struct thc_dma_configuration.
Fixes: a688404b2e20 ("HID: intel-thc-hid: intel-thc: Add THC DMA interfaces")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When a new PlayStation gamepad (DualShock 4 or DualSense) is initialized,
the input subsystem sets the default value for its absolute axes (e.g.,
ABS_X, ABS_Y) to 0.
However, the hardware's actual neutral/resting state for these joysticks
is 128 (0x80). This creates a mismatch.
When the first HID report arrives from the device, the driver sees the
resting value of 128. The kernel compares this to its initial state of 0
and incorrectly interprets this as a delta (0 -> 128). Consequently, it
generates EV_ABS events for this initial, non-existent movement.
This behavior can fail userspace 'sanity check' tests (e.g., in
Android CTS) that correctly assert no motion events should be generated
from a device that is already at rest.
This patch fixes the issue by explicitly setting the initial value of the
main joystick axes (e.g., ABS_X, ABS_Y, ABS_RX, ABS_RY) to 128 (0x80)
in the common ps_gamepad_create() function.
This aligns the kernel's initial state with the hardware's expected
neutral state, ensuring that the first report (at 128) produces no
delta and thus, no spurious event.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Ensure all related groups are evicted and suspended before VM
destruction takes place.
This fixes an issue where panthor_vm_destroy() destroys and unmaps the
heap context while there are still on slot groups using this.
The FW will do a write out to the heap context when a CSG (group) is
suspended, so a premature unmap of the heap context will cause a
GPU page fault.
This page fault is quite harmless, and do not affect the continued
operation of the GPU.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251219093546.1227697-1-ketil.johnsen@arm.com
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
Some faulty devices (ZWO EFWmini) have a wrong optional HID class
descriptor count compared to the provided length.
Given that we plainly ignore those optional descriptor, we can attempt
to fix the provided number so we do not lock out those devices.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
So that both iommu.c and init.c can utilize them. Also define a new
function 'pdom_id_destroy()' to destroy 'pdom_ids' instead of directly
calling ida functions.
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Currently AMD IOMMU driver does not reserve domain ids programmed in the
DTE while reusing the device table inside kdump kernel. This can cause
reallocation of these domain ids for newer domains that are created by
the kdump kernel, which can lead to potential IO_PAGE_FAULTs
Hence reserve these ids inside pdom_ids.
Fixes: 38e5f33ee359 ("iommu/amd: Reuse device table for kdump")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
link is not up
During system suspend, if the PCIe link is not up, then there is no need
to broadcast PME_Turn_Off message and wait for L2/L3 transition. So skip
them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20251218-pci-dwc-suspend-rework-v2-1-5a7778c6094a@oss.qualcomm.com
|
|
drm_colorop.h doesn't need the intel_display_types.h include for
anything. Don't include headers from headers if it can be avoided.
Fixes: 3e9b06559aa1 ("drm/i915: Add intel_color_op")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251218141807.409751-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
RT8092 is a 3MHz 4A efficiency step-down converter with I2C control
interface. It can support wide output range from 0.7 to 5.5V, based on
the voltage bank selection.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/d2293c513f396f86e54f9b806fd0195b57db7aae.1766125676.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
WCL supports a maximum of HBR3 8.1 Gbps for both eDP/DP.
Limit the max source rate to HBR3 for WCL.
v2: Move the check inside mtl_max_source_rate(). (Suraj)
Bspec:74286
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251122053651.759389-1-ankit.k.nautiyal@intel.com
|
|
iaa_unregister_compression_device() always returns 0, making the debug
log message unreachable. Remove the log statement and convert
iaa_unregister_compression_device() to a void function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Return the result directly to simplify init_iaa_device().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL.
Cc: stable@vger.kernel.org
Fixes: b190447e0fa3 ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
OTX_CPT_UCODE_NAME_LENGTH limits the microcode name to 64 bytes. If a
user writes a string of exactly 64 characters, the original code used
'strlen(buf) > 64' to check the length, but then strscpy() copies only
63 characters before adding a NUL terminator, silently truncating the
copied string.
Fix this off-by-one error by using 'count' directly for the length check
to ensure long names are rejected early and copied without truncation.
Cc: stable@vger.kernel.org
Fixes: d9110b0b01ff ("crypto: marvell - add support for OCTEON TX CPT engine")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h:251:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In qm_get_complete_eqe_num(), the function entry has already
checked whether the interrupt is valid, so the interrupt event
can be processed directly. Currently, the interrupt valid bit is
being checked again redundantly, and no interrupt processing is
performed. Therefore, the loop condition should be modified to
directly process the interrupt event, and use do while instead of
the current while loop, because the condition is always satisfied
on the first iteration.
Fixes: f5a332980a68 ("crypto: hisilicon/qm - add the save operation of eqe and aeqe")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/starfive/jh7110-cryp.h:219:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Building the QAT driver with -Wmaybe-uninitialized triggers warnings in
qat_common/adf_pfvf_pf_proto.c. Specifically, the variables blk_type,
blk_byte, and byte_max may be used uninitialized in handle_blkmsg_req():
make M=drivers/crypto/intel/qat W=1 C=2 "KCFLAGS=-Werror" \
KBUILD_CFLAGS_KERNEL=-Wmaybe-uninitialized \
CFLAGS_MODULE=-Wmaybe-uninitialized
...
warning: ‘byte_max’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_type’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_byte’ may be used uninitialized [-Wmaybe-uninitialized]
Although the caller of handle_blkmsg_req() always provides a req.type
that is handled by the switch, the compiler cannot guarantee this.
Add a default case to the switch statement to handle an invalid req.type.
Fixes: 673184a2a58f ("crypto: qat - introduce support for PFVF block messages")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Register the functions required to save and restore the state of a ring
bank on the qat_420xx device. Since this logic is shared across QAT
GEN4 devices, reuse the existing GEN4 implementation.
This functionality enables saving and restoring the state of a Virtual
Function (VF), which is required for supporting VM Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The macro ICP_QAT_FW_COMN_FLAGS_BUILD sets flags in the firmware
descriptor to indicate:
* Whether the content descriptor is a pointer or contains embedded
data.
* Whether the source and destination buffers are scatter-gather lists
or flat buffers.
The correct parameter order is:
* First: content descriptor type
* Second: source/destination pointer type
In the asymmetric crypto code, the macro was used with the parameters
swapped. Although this does not cause functional issues, since both
macros currently evaluate to 0, it is incorrect.
Fix the parameter order in the Diffie-Hellman and RSA code paths.
Fixes: a990532023b9 ("crypto: qat - Add support for RSA algorithm")
Fixes: c9839143ebbf ("crypto: qat - Add DH support")
Reported-by: Qihua Dai <qihua.dai@intel.com> # off-list
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add support for various CRKD Guitar Controllers.
Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com>
Link: https://patch.msgid.link/20251129073720.2750-2-sanjay.govind9@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The mdelay() is called in sleeping context and it should be OK to delay
slightly longer than requested, so switch the code to use fsleep() to
avoid spinning.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The ilitek touchscreen driver uses the non-sleeping gpiod_set_value
function for reset.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
Further switch the mdelay calls on the reset path to fsleep (preferred
in non-atomic contexts).
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://patch.msgid.link/20251201-imx8mp-hb-iiot-v4-2-53a4cd6c21bf@solid-run.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
ABS_SND_PROFILE used to describe the state of a multi-value sound profile
switch. This will be used for the alert-slider on OnePlus phones or other
phones.
Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
to input-event-codes.h so they can be used from DTS.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Guido Günther <agx@sigxcpu.org> # oneplus,fajita & oneplus,enchilada
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251113-op6-tri-state-v8-1-54073f3874bc@ixit.cz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Like the TWL4030, these PMICs also have a power button feature, so extend
the TWL4030 power button driver. As the irqchip of the TWL6030 mfd driver
does not provide mask, unmask finctions, do it manually.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251106-twl6030-button-v4-2-fdf1aa6e1e9a@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
WQ_UNBOUND on the custom workqueue instead.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-5-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-4-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-3-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-2-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
- Limit num_syncs to prevent oversized kernel allocations (Shuicheng)
- Disallow 0 OA property values (Ashutosh)
- Disallow 0 EU stall property values (Ashutosh)
Driver Changes:
- Fix kobject leak (Shuicheng)
- Workaround (Vinay)
- Loop variable reference fix (Matt Brost)
- Fix a CONFIG corner-case incorrect number of arguments (Arnd Bergmann)
- Skip reason prefix while emitting array (Raag)
- VF migration fix (Tomasz)
- Fix context in mei interrupt top half (Junxiao)
- Don't include the CCS metadata in the dma-buf sg-table (Thomas)
- VF queueing recovery work fix (Satyanarayana)
- Increase TDF timeout (Jagmeet)
- GT reset registers vs scheduler ordering fix (Jan)
- Adjust long-running workload timeslices (Matt Brost)
- Always set OA_OAGLBCTXCTRL_COUNTER_RESUME (Ashutosh)
- Fix a return value (Dan Carpenter)
- Drop preempt-fences when destroying imported dma-bufs (Thomas)
- Use usleep_range for accurate long-running workload timeslicing (Matthew)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/aUSMlQ4iruzm0NQR@fedora
|
|
Sphinx reports htmldocs warnings:
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:76: ERROR: A level 2 section cannot be used here.
Documentation/gpu/xe/xe_firmware:31: ./drivers/gpu/drm/xe/xe_guc_pc.c:87: ERROR: A level 2 section cannot be used here.
The xe_guc_pc.c documentation is included inside xe_firmware.rst.
The headers in the C file currently use '=' underlines, which conflict with
the parent document's section levels.
Fix this by demoting "Frequency management" and "Render-C States" headers
from '=' to '-' to correctly nest them as subsections.
Build environment: Python 3.13.7 Sphinx 8.2.3 docutils 0.22.3
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Link: https://patch.msgid.link/20251209094836.18589-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove unused index variable and fix for loop.
Fixes: f4e9fc967afd ("drm/xe/xe_survivability: Redesign survivability mode")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/intel-xe/20251210075757.GA1206705@ax162/
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251218105151.586575-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
posted_msi_supported() is a misnomer as it actually checks whether it is
enabled or not. Aside of that this does not take CONFIG_X86_POSTED_MSI into
account which is required to actually use it.
Rename it to posted_msi_enabled() and make the return value depend on
CONFIG_X86_POSTED_MSI, which allows the compiler to eliminate the related
dead code and data if disabled:
text data bss dec hex filename
10046 701 3296 14043 36db drivers/iommu/intel/irq_remapping.o
9904 413 3296 13613 352d drivers/iommu/intel/irq_remapping.o
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251125214631.170499997@linutronix.de
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc2:
- Add -EDEADLK handling in drm unit tests.
- Plug DRM_IOCTL_GEM_CHANGE_HANDLE leak.
- Fix regression in sony-td4353-jdi.
- Kconfig fix for visionox-rm69299.
- Do not load amdxdna when running virtualized.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/21861d1b-54bf-4853-9c35-97abe3c5deba@linux.intel.com
|
|
Mark CRI as one that have the CSC NVM device.
Update the writable override flow to take the information from
the scratch register for CRI.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251216111034.3093507-1-alexander.usyskin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add a missing PCC check for guaranteed_perf in the ACPI CPPC
library and fix a static local variable access race condition in
acpi_pcc_address_space_setup() (Pengjie Zhang)"
* tag 'acpi-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: Fix race condition by removing static qualifier
ACPI: CPPC: Fix missing PCC check for guaranteed_perf
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the power capping code including one recent
regression and a runtime PM framework regression introduced during the
6.17 development cycle:
- Fix CPU hotplug locking deadlock reported by lockdep after a recent
update of the Intel RAPL power capping driver (Srinivas Pandruvada)
- Fix sscanf() error return value handling in the power capping core
and a race condition in register_control_type() (Sumeet Pawnikar)
- Fix a concurrent bit field update issue in the runtime PM core code
by only updating the bit field in question when runtime PM is
disabled (Rafael Wysocki)"
* tag 'pm-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl: Fix possible recursive lock warning
PM: runtime: Do not clear needs_force_resume with enabled runtime PM
powercap: fix sscanf() error return value handling
powercap: fix race condition in register_control_type()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These enable a new hardware feature in the int340x thermal driver and
fix up comments in the thermal core code:
- Set a feature flag in the int340x thermal driver to enable the
power slider interface for Wildcat Lake processors (Srinivas
Pandruvada)
- Fix typo and indentation in comments in the thermal core (Thorsten
Blum)"
* tag 'thermal-6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix typo and indentation in comments
thermal: intel: int340x: Enable power slider interface for Wildcat Lake
|
