| Age | Commit message (Collapse) | Author |
|---|
|
When the EFI stub itself loads the initrd and puts it in memory (rather
than simply passing on a struct boot_params or device tree that already
carries initrd information), it exposes this information to the core
kernel via a INITRD configuration table.
Given that config tables are preserved across kexec, this means that
subsequent kexec boots will observe the same information, even though it
most likely has become stale by that point. On x86, this information is
usually superseded by the initrd info passed via bootparams, in which
case this stale information is simply ignored. However, when performing
a kexec boot without passing an initrd, the loader falls back to this
stale information and explodes.
So wipe the base and size from the INITRD config table as soon as it has
been consumed. This fixes the issue for kexec on all EFI architectures.
Reported-by: James Le Cuirot <chewi@gentoo.org>
Tested-by: James Le Cuirot <chewi@gentoo.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/all/20251126173209.374755-2-chewi@gentoo.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In order to correctly handle the interaction between the reset-gpio
devices and shared GPIOs managed by GPIOLIB, we need to be able to
identify the former. Add the "compatible" property to allow us to use
the device_is_compatible() helper.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
I've acquired a Logitech MX Anywhere 3S mouse, which supports HID++ over
Bluetooth. Adding its PID 0xb037 to the allowlist enables the additional
features, such as high-resolution scrolling. Tested working across multiple
machines, with a mix of Intel and Mediatek Bluetooth chips.
[jkosina@suse.com: standardize shortlog]
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
On Asus ROG laptops, the Fn+F5 key (HID code 0xae) is used to cycle
through fan modes. This key press needs to be forwarded to the asus-wmi
driver to actually change the fan mode.
Add ASUS_FAN_CTRL_KEY_CODE define and implement the handler in
asus_raw_event() to send WMI events when this key is pressed.
When asus-wmi successfully handles the event, it is blocked from reaching
userspace. If asus-wmi is unavailable or fails, the event is passed to
userspace via evdev, allowing userspace implementations of fan control.
Tested on Asus ROG G14/G15 series laptops.
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add infrastructure for the HID driver to communicate with the asus-wmi
driver for handling special keys that require WMI communication.
This includes:
- Define ASUS_WMI_METHODID_NOTIF method ID in asus-wmi.h
- Implement asus_wmi_send_event() function to send events to asus-wmi
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
On Asus ROG laptops, several HID vendor usage codes (0xea, 0xec, 0x02,
0x8a, 0x9e) are sent during normal operation without a clear purpose,
generating unwanted "Unmapped Asus vendor usagepage code" warnings in
dmesg.
Add definitions for these codes and filter them out in asus_raw_event()
to prevent kernel log spam.
Tested on Asus ROG series laptops.
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Use the existing HID_UP_ASUSVENDOR constant instead of the magic number
0xff310000 for better code clarity and maintainability.
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Ionut Nechita <ionut_n2001@yahoo.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This driver provides backlight brightness control through the Linux
backlight subsystem. It communicates with the board controller to
adjust LCD backlight using PWM signals. Communication is done
through Congatec Board Controller core driver.
Tested-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Signed-off-by: Petri Karhula <petri.karhula@novatron.fi>
Link: https://patch.msgid.link/20251205-cgbc-backlight-v6-1-e4175b0bf406@novatron.fi
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Starting from NPU6, the driver can pass boot parameters address through
the AON retention register and toggle between cold/warm boot types using
the boot_type parameter, while setting the cold boot entry point in both
cases.
Refactor the existing cold/warm boot handling to be consistent with the
new NPU6 boot flow requirements and still maintain compatibility with
older boot flows.
This will allow firmware to remove support for legacy warm boot starting
from NPU6.
Fixes: 550f4dd2cedd ("accel/ivpu: Add support for Nova Lake's NPU")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://patch.msgid.link/20251230142116.540026-1-maciej.falkowski@linux.intel.com
|
|
Building with W=1 reports several kernel-doc warnings in
drivers/leds/leds-lm3692x.c:
Warning: leds-lm3692x.c:122 struct member 'boost_ctrl'
not described in 'lm3692x_led'
Warning: leds-lm3692x.c:122 struct member 'brightness_ctrl'
not described in 'lm3692x_led'
Warning: leds-lm3692x.c:122 struct member 'enabled'
not described in 'lm3692x_led'
These fields were added to struct lm3692x_led but the corresponding
kernel-doc comment was not updated. Convert the kernel-doc block to
use the "@member: description" style consistently and document the
boost_ctrl, brightness_ctrl and enabled fields.
This keeps the documentation in sync with the implementation and
silences the W=1 warnings.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://patch.msgid.link/20251201042612.2099239-1-vivek.balachandhar@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context.
airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL
flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order
to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we
do not need atomic context there.
Fixes: 00a7678310fe3 ("net: airoha: Introduce flowtable offload support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260105-airoha-fw-ethtool-v2-1-3b32b158cc31@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The code, as it is, plays fast and loose with bandwidth units. It also
doesn't specify its constraints in the actual maximum hardware value,
but as some roundabout thing that then ends up multiplied into the
actual hardware value constraint after some indirections. In part, this
is due to the use of individual members for storing each limit, instead
of making it possible to index them by type.
Rework all of this by adding const array members indexed by the
bandwidth type enum to the soc_data struct. This array expresses the
actual hardware value limitations, not a factor thereof.
Use the clamp function macro to clamp the values between the minimum and
maximum constraints after all the calculations, which also means the
code doesn't write nonsense to a hardware register when the math is
wrong, as it'll constrain after all the calculations.
Pass the type as the actual enum type as well, and not as an int. If
there's some type checking that can be extracted from the function
signature, then we may as well use it.
Don't needlessly explicitly cast return values to the return type
either; this is both unnecessary and makes it harder to spot type safety
issues.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The DVFSRC has a clock on all platforms.
Get and enable it in the probe function, so that Linux's common clock
framework knows we're a user of it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add support for the DVFSRC Version 4 by adding new functions for
vcore/dram levels (in v4, called gears instead), and for readout
of pre-programmed dvfsrc_opp entries, corresponding to each gear.
In the probe function, for v4, the curr_opps is initialized from
the get_hw_opps() function instead of platform data.
In order to make use of the new DVFSRCv4 code, also add support
for the MediaTek MT8196 SoC.
Co-developed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In preparation for adding support for DVFSRC Version 4, add a new
`has_emi_ddr` member to struct dvfsrc_soc_data: if true, write the
DRAM bandwidth both to the BW_AVG and to the newly defined EMI_BW
register, present only on DVFSRC v4.
Currently supported SoCs will not use this, as has_emi_ddr is left
out from their platform data, hence reading false.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In preparation for adding support for DVFSRC Version 4, add a new
callback for calculating the dram bandwidth, assign the current
calculation algo to all of the currently supported SoCs, and use
this in __dvfsrc_set_dram_bw_v1().
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In preparation for adding support for DVFSRC Version 4, add a new
mtk_dvfsrc_bw_type enumeration, and propagate it from specific bw
setting callbacks to __dvfsrc_set_dram_bw_v1(), which will use it
to choose calculation multipliers and dividers in v4 callbacks.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In preparation for adding support for DVFSRC Version 4, change the
error check for the MTK_SIP_DVFSRC_START command in the probe
function to error out only if BIT(0) is set: this is still valid
for the previous DVFSRC versions, as those always set this bit in
a fail reply anyway.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Add an entry for the MT8371 SoC with commercial name Genio 520.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
In svs_enable_debug_write(), the buf allocated by memdup_user_nul()
is leaked if kstrtoint() fails.
Fix this by using __free(kfree) to automatically free buf, eliminating
the need for explicit kfree() calls and preventing leaks.
Fixes: 13f1bbcfb582 ("soc: mediatek: SVS: add debug commands")
Co-developed-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Jianhao Xu <jianhao.xu@seu.edu.cn>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
[Angelo: Added missing cleanup.h inclusion]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Private state is available in all places where cpg_rzt2h_mstp_read() is
called, remove the extra pointer math used to find it from clk_hw.
While at it, put these statements on a single line as they do not exceed
the 80 columns limit.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251127145654.3253992-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
"version" is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
ahci_xgene.c:776:13: error: cast to smaller integer type 'enum xgene_ahci_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
"imxpriv->type" is an enum, thus cast of pointer on 64-bit compile test
with clang W=1 causes:
ahci_imx.c:872:18: error: cast to smaller integer type 'enum ahci_imx_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Use scoped for-each loop when iterating over device nodes and switch to
iterating already over available nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
clear_page() translates into memset(*p, 0, PAGE_SIZE) on some
architectures, but on the major architectures it will call
an optimized assembly snippet so use this instead of open
coding a memset().
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nirmoy Das <nirmoyd@nvidia.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251130-dma-buf-heap-clear-page-v1-1-a8dcea2a88ee@linaro.org
|
|
There are unused variables without CONFIG_OF:
drivers/input/misc/twl4030-pwrbutton.c:41:44: error: unused variable 'twl4030_chipdata' [-Werror,-Wunused-const-variable]
41 | static const struct twl_pwrbutton_chipdata twl4030_chipdata = {
| ^~~~~~~~~~~~~~~~
drivers/input/misc/twl4030-pwrbutton.c:46:44: error: unused variable 'twl6030_chipdata' [-Werror,-Wunused-const-variable]
46 | static const struct twl_pwrbutton_chipdata twl6030_chipdata = {
Fix that by avoiding some #ifdef CONFIG_OF
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512220251.jDE8tKup-lkp@intel.com/
Fixes: ec8fce2a57e9 ("Input: twl4030 - add TWL603x power button")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251227115918.76969-1-andreas@kemnade.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Device-to-device migration is causing xe_exec_system_allocator --r
*race*no* to intermittently fail with engine resets and a kernel hang on
a page lock. This should work but is clearly buggy somewhere. Disable
device-to-device migration in the interim until the issue can be
root-caused.
The only downside of disabling device-to-device migration is that memory
will bounce through system memory during migration. However, this path
should be rare, as it only occurs when madvise attributes are changed or
atomics are used.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: ec265e1f1cfc ("drm/pagemap: Support source migration over interconnect")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260107182716.2236607-3-matthew.brost@intel.com
|
|
Avoid unlocking and putting device pages unless they were successfully
locked, and do not calculate migrated_pages on error paths.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 75af93b3f5d0 ("drm/pagemap, drm/xe: Support destination migration over interconnect")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20260107182716.2236607-2-matthew.brost@intel.com
|
|
Page accounting can change via the shrinker without calling
xe_ttm_tt_unpopulate(), which normally updates page count tracepoints
through update_global_total_pages. Add a call to
update_global_total_pages when the shrinker successfully shrinks a BO.
v2:
- Don't adjust global accounting when pinning (Stuart)
Cc: stable@vger.kernel.org
Fixes: ce3d39fae3d3 ("drm/xe/bo: add GPU memory trace points")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260107205732.2267541-1-matthew.brost@intel.com
|
|
Replace ARCH_TEGRA_194_SOC dependency with a more generic ARCH_TEGRA check
for the Tegra194 PCIe controller, allowing it to be built on Tegra
platforms beyond Tegra194. Additionally, ensure compatibility by requiring
ARM64 or COMPILE_TEST since this driver works only for ARM64 Tegra SoCs.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[mani: moved ARM64 dependency to ARCH_TEGRA]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Acked-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20250508051922.4134041-1-vidyas@nvidia.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.19-2026-01-06:
amdgpu:
- Clang fixes
- Navi1x PCIe DPM fixes
- Ring reset fixes
- ISP suspend fix
- Analog DC fixes
- VPE fixes
- Mode1 reset fix
radeon:
- Variable sized array fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260107223315.16095-1-alexander.deucher@amd.com
|
|
Wireless/new version of the Elecom trackball mouse M-XT3DRBK has a
product id that differs from the existing M-XT3DRBK.
The report descriptor format also seems to have changed and matches
other (newer?) models instead (except for six buttons instead of eight).
This patch follows the same format as the patch for the M-XT3URBK (018F)
by Naoki Ueki (Nov 3rd 2025) to enable the sixth mouse button.
dmesg output:
[ 292.074664] usb 1-2: new full-speed USB device number 7 using xhci_hcd
[ 292.218667] usb 1-2: New USB device found, idVendor=056e, idProduct=018c, bcdDevice= 1.00
[ 292.218676] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 292.218679] usb 1-2: Product: ELECOM TrackBall Mouse
[ 292.218681] usb 1-2: Manufacturer: ELECOM
usbhid-dump output:
001:006:000:DESCRIPTOR 1765072638.050578
05 01 09 02 A1 01 09 01 A1 00 85 01 05 09 19 01
29 05 15 00 25 01 95 08 75 01 81 02 95 01 75 00
81 01 05 01 09 30 09 31 16 00 80 26 FF 7F 75 10
95 02 81 06 C0 A1 00 05 01 09 38 15 81 25 7F 75
08 95 01 81 06 C0 A1 00 05 0C 0A 38 02 95 01 75
08 15 81 25 7F 81 06 C0 C0 06 01 FF 09 00 A1 01
85 02 09 00 15 00 26 FF 00 75 08 95 07 81 02 C0
05 0C 09 01 A1 01 85 05 15 00 26 3C 02 19 00 2A
3C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01 85
03 19 81 29 83 15 00 25 01 95 03 75 01 81 02 95
01 75 05 81 01 C0 06 BC FF 09 88 A1 01 85 04 95
01 75 08 15 00 26 FF 00 19 00 2A FF 00 81 00 C0
06 02 FF 09 02 A1 01 85 06 09 02 15 00 26 FF 00
75 08 95 07 B1 02 C0
Signed-off-by: Arnoud Willemsen <mail@lynthium.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
For years I wondered why the Apple Cinema Display driver would not
just work for me. Turns out the hidraw driver instantly takes it
over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver.
Fixes: 069e8a65cd79 ("Driver for Apple Cinema Display")
Signed-off-by: René Rebe <rene@exactco.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Skipping power ungate exposed some scenarios that will fail
like below:
```
amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n
amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed
...
amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout!
```
The underlying s2idle issue that prompted this commit is going to
be fixed in BIOS.
This reverts commit 2a6c826cfeedd7714611ac115371a959ead55bda.
This was lost in the 6.19 merge so reapply it.
Fixes: 2a6c826cfeed ("drm/amd: Skip power ungate during suspend for VPE")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Konstantin <answer2019@yandex.ru>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812
Reported-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3925683515e93844be204381d2d5a1df5de34f31)
|
|
dac_load_detection can be NULL in some scenario, so checking it before
calling.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 179176134b535246f0b368b30e8ecad50066f896)
|
|
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4)
|
|
Bring some drm-scheduler patches to Xe.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc5:
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f50067e6-243a-4ed8-9781-1e4e4fdebc8e@linux.intel.com
|
|
The driver only supports AArch64 page tables where OAS == IAS.
Remove the extra IAS tracking for AArch32 as this feature was
never implemented and that was creating BAD_STEs for SMMUv3
with stage-2 and OAS < 40.
Further discussion on this in:
https://lore.kernel.org/linux-iommu/20251130194506.593700-1-smostafa@google.com/
Reported-by: Tomasz Nowicki <tnowicki@google.com>
Fixes: f0c453dbcce7 ("iommu/arm-smmu: Ensure IAS is set correctly for AArch32-capable SMMUs")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for firmware filenames that include the CRC32 checksum of the
DMI product_family field. Several OEMs ship ISH firmware variants shared
across a product family while product_name or product_sku may differ. This
intermediate matching granularity reduces duplication and improves firmware
selection for vendor-customized platforms.
The newly supported filename forms are checked before existing patterns:
ish_${gen}_${vendor}_${family}_${name}_${sku}.bin
ish_${gen}_${vendor}_${family}_${sku}.bin
ish_${gen}_${vendor}_${family}_${name}.bin
ish_${gen}_${vendor}_${family}.bin
The legacy product_name/product_sku rules remain unchanged and continue
to provide fallback matching.
ISH_FW_FILENAME_LEN_MAX is changed to 72 to accommodate the product_family.
Tested with X9 series and X1 series.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Richie Roy Jayme <rjayme.jp@gmail.com>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Send POWER_SLEEP command to touch device when system enters into sleep
mode or hibernate mode to save more power; and send POWER_ON command to
take device back when system exits sleep mode.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add support for HID output reports in the intel-quicki2c driver by
implementing the output_report callback in the HID low-level driver
interface.
This enables proper communication with HID devices that require
output report functionality, such as setting device configuration or
updating device firmware.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
There are two output formats requested in the HID-over-I2C specification:
- Command format (set feature/set report): encoded command written to
command register, followed by data written to data register
- Output report format: all data written directly to output register
Current quicki2c_init_write_buf() implementation only supports the
command format.
Extend quicki2c_init_write_buf() to automatically detect the output
format based on the presence of command parameters and prepare the
appropriate output buffer accordingly.
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Replace memcpy operations with put_unaligned_le16() when writing 16-bit
little-endian values to the write buffer.
This change improves code clarity and ensures proper handling of unaligned
memory access.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Convert all length-related variables in the QuickI2C protocol layer to use
size_t type to follow kernel coding conventions.
This includes:
- All buffer length parameters and variables
- Return values of quicki2c_encode_cmd() function which represents
encoded command buffer size.
- Return values of quicki2c_init_write_buf() function which represents
process result: either prepared output buffer size or error code.
This change improves type consistency and aligns with standard kernel
practices for memory size representation, reducing potential issues
with size calculations and comparisons.
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions.
sysfs_emit() and sysfs_emit_at() are preferred to format sysfs output
as they provide better bounds checking.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Link: https://patch.msgid.link/20251220223026.125678-1-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On processors starting from Panther Lake, additional workload type hints
are provided.
The hardware analyzes workload residencies over an extended period to
determine whether the workload classification tends toward idle/battery
life states or sustained/performance states. Based on this long-term
analysis, it classifies:
Power Classification: If the workload exhibits more idle or battery
life residencies, it is classified as "power". This is indicated by
setting bit 4 of the current workload type.
Performance Classification: If the workload exhibits more sustained
or performance residencies, it is classified as "performance". This
is indicated by clearing bit 4 of the current workload type.
This approach enables applications to ignore short-term workload
fluctuations and instead respond to longer-term power vs. performance
trends. Hints of this type are called slow workload hints.
To get notifications for slow workload hints, bit 22 in the thermal
mailbox can be used for configuring workload interrupts. It is possible
to exclusively enable slow workload hints or enable them in addition to
the current workload hints.
To enable slow workload hints, a new sysfs attribute is added to the
existing workload hint attributes:
workload_slow_hint_enable (RW): Write 1 to enable, 0 to disable.
Reading this attribute shows the current state.
This attribute is not present on any previous generation of processors.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Dropped redundant local variables, changelog edits ]
Link: https://patch.msgid.link/20251218222559.4110027-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strlen() with the safer strnlen() and calculate the length of
the thermal zone name 'type' only once.
No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
[ rjw: Subject edits ]
Link: https://patch.msgid.link/20251216130943.40180-2-thorsten.blum@linux.dev
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add validation for C-states specified via the "table=" module parameter.
Treat this module parameter as untrusted input and validate it thoroughly.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20251216080402.156988-4-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
