| Age | Commit message (Collapse) | Author |
|---|
|
Use LIST_HEAD() to declare and initialize the 'mappings' list head in
iommu_create_device_direct_mappings() instead of separate declaration and
INIT_LIST_HEAD(). This simplifies the code by combining declaration and
initialization into a single idiomatic form, improving readability without
changing functionality.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled.
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The QUICC Engine provides interrupts for a few I/O ports. This is
handled via a separate interrupt ID and managed via a triplet of
dedicated registers hosted by the SoC.
Implement an interrupt driver for it so that those IRQs can then
be linked to the related GPIOs.
Link: https://lore.kernel.org/r/63f19db21a91729d91b3df336a56a7eb4206e561.1767804922.git.chleroy@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Now, as the page_ext holds count of IOMMU mappings, we can use it to
assert that any page allocated/freed is indeed not in the IOMMU.
The sanitizer doesn’t protect against mapping/unmapping during this
period. However, that’s less harmful as the page is not used by the
kernel.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Using the new calls, use an atomic refcount to track how many times
a page is mapped in any of the IOMMUs.
For unmap we need to use iova_to_phys() to get the physical address
of the pages.
We use the smallest supported page size as the granularity of tracking
per domain.
This is important as it is possible to map pages and unmap them with
larger sizes (as in map_sg()) cases.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add calls for the new iommu debug config IOMMU_DEBUG_PAGEALLOC:
- iommu_debug_init: Enable the debug mode if configured by the user.
- iommu_debug_map: Track iommu pages mapped, using physical address.
- iommu_debug_unmap_begin: Track start of iommu unmap operation, with
IOVA and size.
- iommu_debug_unmap_end: Track the end of unmap operation, passing the
actual unmapped size versus the tracked one at unmap_begin.
We have to do the unmap_begin/end as once pages are unmapped we lose
the information of the physical address.
This is racy, but the API is racy by construction as it uses refcounts
and doesn't attempt to lock/synchronize with the IOMMU API as that will
be costly, meaning that possibility of false negative exists.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Add a new config IOMMU_DEBUG_PAGEALLOC, which registers new data to
page_ext.
This config will be used by the IOMMU API to track pages mapped in
the IOMMU to catch drivers trying to free kernel memory that they
still map in their domains, causing all types of memory corruption.
This behaviour is disabled by default and can be enabled using
kernel cmdline iommu.debug_pagealloc.
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
gcc 8.5 on powerpc does not automatically inline these functions even
though they evaluate to constants in key cases. Since the constant
propagation is essential for some code elimination and built-time checks
this causes a build failure:
ERROR: modpost: "__pt_no_sw_bit" [drivers/iommu/generic_pt/fmt/iommu_amdv1.ko] undefined!
Caused by this:
if (pts_feature(&pts, PT_FEAT_DMA_INCOHERENT) &&
!pt_test_sw_bit_acquire(&pts,
SW_BIT_CACHE_FLUSH_DONE))
flush_writes_item(&pts);
Where pts_feature() evaluates to a constant false. Mark them as
__always_inline to force it to evaluate to a constant and trigger the code
elimination.
Fixes: 7c5b184db714 ("genpt: Generic Page Table base API")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512230720.9y9DtWIo-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The selftest now depends on the AMDv1 page table, however the selftest
kconfig itself is just an sub-option of the main IOMMUFD module kconfig.
This means it cannot be modular and so kconfig allowed a modular
IOMMU_PT_AMDV1 with a built in IOMMUFD. This causes link failures:
ld: vmlinux.o: in function `mock_domain_alloc_pgtable.isra.0':
selftest.c:(.text+0x12e8ad3): undefined reference to `pt_iommu_amdv1_init'
ld: vmlinux.o: in function `BSWAP_SHUFB_CTL':
sha1-avx2-asm.o:(.rodata+0xaa36a8): undefined reference to `pt_iommu_amdv1_read_and_clear_dirty'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f0): undefined reference to `pt_iommu_amdv1_map_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa36f8): undefined reference to `pt_iommu_amdv1_unmap_pages'
ld: sha1-avx2-asm.o:(.rodata+0xaa3720): undefined reference to `pt_iommu_amdv1_iova_to_phys'
Adjust the kconfig to disable IOMMUFD_TEST if IOMMU_PT_AMDV1 is incompatible.
Fixes: e93d5945ed5b ("iommufd: Change the selftest to use iommupt instead of xarray")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512210135.freQWpxa-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The test doesn't build without it, dma-buf.h does not provide stub
functions if it is not enabled. Compilation can fail with:
ERROR:root:ld: vmlinux.o: in function `iommufd_test':
(.text+0x3b1cdd): undefined reference to `dma_buf_get'
ld: (.text+0x3b1d08): undefined reference to `dma_buf_put'
ld: (.text+0x3b2105): undefined reference to `dma_buf_export'
ld: (.text+0x3b211f): undefined reference to `dma_buf_fd'
ld: (.text+0x3b2e47): undefined reference to `dma_buf_move_notify'
Add the missing select.
Fixes: d2041f1f11dd ("iommufd/selftest: Add some tests for the dmabuf flow")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The kunit doesn't work since the below commit made GENERIC_PT
unselectable:
$ make ARCH=x86_64 O=build_kunit_x86_64 olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_DEBUG_GENERIC_PT=y, CONFIG_IOMMUFD_TEST=y,
CONFIG_IOMMU_PT_X86_64=y, CONFIG_GENERIC_PT=y, CONFIG_IOMMU_PT_AMDV1=y,
CONFIG_IOMMU_PT_VTDSS=y, CONFIG_IOMMU_PT=y, CONFIG_IOMMU_PT_KUNIT_TEST=y
Also remove the unneeded CONFIG_IOMMUFD_TEST reference as the iommupt kunit
doesn't interact with iommufd, and it doesn't currently build for the
kunit due problems with DMA_SHARED buffer either.
Fixes: 01569c216dde ("genpt: Make GENERIC_PT invisible")
Fixes: 1dd4187f53c3 ("iommupt: Add a kunit test for Generic Page Table")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
PCIe permits a device to ignore ATS invalidation TLPs while processing a
reset. This creates a problem visible to the OS where an ATS invalidation
command will time out: e.g. an SVA domain will have no coordination with a
reset event and can racily issue ATS invalidations to a resetting device.
The PCIe r6.0, sec 10.3.1 IMPLEMENTATION NOTE recommends SW to disable and
block ATS before initiating a Function Level Reset. It also mentions that
other reset methods could have the same vulnerability as well.
The IOMMU subsystem provides pci_dev_reset_iommu_prepare/done() callback
helpers for this matter. Use them in all the existing reset functions.
This will attach the device to its iommu_group->blocking_domain during the
device reset, so as to allow IOMMU driver to:
- invoke pci_disable_ats() and pci_enable_ats(), if necessary
- wait for all ATS invalidations to complete
- stop issuing new ATS invalidations
- fence any incoming ATS queries
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
PCIe permits a device to ignore ATS invalidation TLPs while processing a
reset. This creates a problem visible to the OS where an ATS invalidation
command will time out. E.g. an SVA domain will have no coordination with a
reset event and can racily issue ATS invalidations to a resetting device.
The OS should do something to mitigate this as we do not want production
systems to be reporting critical ATS failures, especially in a hypervisor
environment. Broadly, OS could arrange to ignore the timeouts, block page
table mutations to prevent invalidations, or disable and block ATS.
The PCIe r6.0, sec 10.3.1 IMPLEMENTATION NOTE recommends SW to disable and
block ATS before initiating a Function Level Reset. It also mentions that
other reset methods could have the same vulnerability as well.
Provide a callback from the PCI subsystem that will enclose the reset and
have the iommu core temporarily change all the attached RID/PASID domains
group->blocking_domain so that the IOMMU hardware would fence any incoming
ATS queries. And IOMMU drivers should also synchronously stop issuing new
ATS invalidations and wait for all ATS invalidations to complete. This can
avoid any ATS invaliation timeouts.
However, if there is a domain attachment/replacement happening during an
ongoing reset, ATS routines may be re-activated between the two function
calls. So, introduce a new resetting_domain in the iommu_group structure
to reject any concurrent attach_dev/set_dev_pasid call during a reset for
a concern of compatibility failure. Since this changes the behavior of an
attach operation, update the uAPI accordingly.
Note that there are two corner cases:
1. Devices in the same iommu_group
Since an attachment is always per iommu_group, this means that any
sibling devices in the iommu_group cannot change domain, to prevent
race conditions.
2. An SR-IOV PF that is being reset while its VF is not
In such case, the VF itself is already broken. So, there is no point
in preventing PF from going through the iommu reset.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
There is a need to stage a resetting PCI device to temporarily the blocked
domain and then attach back to its previously attached domain after reset.
This can be simply done by keeping the "previously attached domain" in the
iommu_group->domain pointer while adding an iommu_group->resetting_domain,
which gives troubles to IOMMU drivers using the iommu_get_domain_for_dev()
for a device's physical domain in order to program IOMMU hardware.
And in such for-driver use cases, the iommu_group->mutex must be held, so
it doesn't fit in external callers that don't hold the iommu_group->mutex.
Introduce a new iommu_driver_get_domain_for_dev() helper, exclusively for
driver use cases that hold the iommu_group->mutex, to separate from those
external use cases.
Add a lockdep_assert_not_held to the existing iommu_get_domain_for_dev()
and highlight that in a kdoc.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
This function can only be called on the default_domain. Trivally pass it
in. In all three existing cases, the default domain was just attached to
the device.
This avoids iommu_setup_dma_ops() calling iommu_get_domain_for_dev() that
will be used by external callers.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The iommu_deferred_attach() function invokes __iommu_attach_device(), but
doesn't hold the group->mutex like other __iommu_attach_device() callers.
Though there is no pratical bug being triggered so far, it would be better
to apply the same locking to this __iommu_attach_device(), since the IOMMU
drivers nowaday are more aware of the group->mutex -- some of them use the
iommu_group_mutex_assert() function that could be potentially in the path
of an attach_dev callback function invoked by the __iommu_attach_device().
Worth mentioning that the iommu_deferred_attach() will soon need to check
group->resetting_domain that must be locked also.
Thus, grab the mutex to guard __iommu_attach_device() like other callers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device.
Cc: stable@vger.kernel.org
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This commit adds support for the PDP RiffMaster and the CRKD Gibson SG
in both their PS4 and PS5 modes.
These devices aren't mapped correctly without these changes, they also
lack support for their whammy and tilt functionality which this patch
adds support for by binding them to the left and right triggers.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch implements support for the fn lock key on the 2025 Asus
ProArt P16. The implementation for this is based on how fn lock is
implemented in the hid-lenovo driver.
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used.
Fixes: 20eb127906709 ("hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Some games (mainly observed with Kylotonn's WRC Serises) set trigger
button to a random value, or always the same one, out of range.
I observed 307 and other values but, for example, my Moza R9 only
exposes 128 buttons AND it's trigger button field is 8-bit. This causes
errors to appear in dmesg.
Only set the trigger button and trigger interval in the trigger button
is in range of the field.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite
USB device providing both touch and tablet interfaces for both screens.
All inputs report through a single device, differentiated solely by report
numbers. As there is no way for udev to differentiate the inputs based on
USB vendor/product ID or interface numbers, custom naming is required to
match against for downstream configuration. A firmware bug also results
in an erroneous InRange message report being received after the stylus
leaves proximity, blocking later touch events. Add required quirks for
Gen 8 to Gen 10 models, including a new quirk providing for custom input
device naming and dropping erroneous InRange reports.
Signed-off-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Kris Fredrick <linux.baguette800@slmail.me>
Reported-by: Andrei Shumailov <gentoo1993@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The ps_gamepad_create() function calls input_ff_create_memless()
without verifying its return value, which can lead to incorrect
behavior or potential crashes when FF effects are triggered.
Add a check for the return value of input_ff_create_memless().
Fixes: 51151098d7ab ("HID: playstation: add DualSense classic rumble support.")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The SoNiX KN85 keyboard identifies as the "Apple, Inc. Aluminium
Keyboard" and is not recognized as a non-apple keyboard. Adding "SoNiX
KN85 Keyboard" to the list of non-apple keyboards fixes the function
keys.
Signed-off-by: Joey Bednar <linux@joeybednar.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
This patch adds support for handling the side buttons
on the RAPOO 0x2015 wireless mouse. These buttons were
previously not generating input events due to missing
driver logic.
The new code handles raw HID input report with Report
ID 1 and maps the side buttons to KEY_BACK and KEY_FORWARD
using the input subsystem.
Tested on a RAPOO mouse with USB ID 24AE:2015.
Signed-off-by: Nguyen Dinh Dang Duong <dangduong31205@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add RCU protection on (struct macvlan_source_entry)->vlan.
Whenever macvlan_hash_del_source() is called, we must clear
entry->vlan pointer before RCU grace period starts.
This allows macvlan_forward_source() to skip over
entries queued for freeing.
Note that macvlan_dev are already RCU protected, as they
are embedded in a standard netdev (netdev_priv(ndev)).
Fixes: 79cf79abce71 ("macvlan: add source mode")
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260108133651.1130486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Kill unlikely checks for blk-rq-qos. These checks are really
all-or-nothing, either the branch is taken all the time, or it's not.
Depending on the configuration, either one of those cases may be
true. Just remove the annotation
- Fix for merging bios with different app tags set
- Fix for a recently introduced slowdown due to RCU synchronization
- Fix for a status change on loop while it's in use, and then a later
fix for that fix
- Fix for the async partition scanning in ublk
* tag 'block-6.19-20260109' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
ublk: fix use-after-free in ublk_partition_scan_work
blk-mq: avoid stall during boot due to synchronize_rcu_expedited
loop: add missing bd_abort_claiming in loop_set_status
block: don't merge bios with different app_tags
blk-rq-qos: Remove unlikely() hints from QoS checks
loop: don't change loop device under exclusive opener in loop_set_status
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Do not return false if !preemptible() in current_in_efi(). EFI
runtime services can now run with preemption enabled
- Fix uninitialised variable in the arm MPAM driver, reported by sparse
- Fix partial kasan_reset_tag() use in change_memory_common() when
calculating page indices or comparing ranges
- Save/restore TCR2_EL1 during suspend/resume, otherwise the E0POE bit
is lost
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix cleared E0POE bit after cpu_suspend()/resume()
arm64: mm: Fix incomplete tag reset in change_memory_common()
arm_mpam: Stop using uninitialized variables in __ris_msmon_read()
arm64/efi: Don't fail check current_in_efi() if preemptible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
|
|
Commit 4fe516d2ad1a ("cxl/acpi: Make the XOR calculations available
for testing") split xormap handling code to create a reusable helper
function but inadvertently dropped the check of HBIW values before
dereferencing cxlrd->platform_data. When HBIW is 1 or 3, no xormaps
are needed and platform_data may be NULL, leading to a potential NULL
pointer dereference.
Affects platform configs using XOR Arithmetic with HBIWs of 1 or 3,
when performing DPA->HPA address translation for CXL events. Those
events would be any of poison ops, general media, or dram.
Restore the early return check for HBIW values of 1 and 3 before
dereferencing platform_data.
Fixes: 4fe516d2ad1a ("cxl/acpi: Make the XOR calculations available for testing")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260109194946.431083-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Previously, compressible surfaces were required to be non-coherent
(allocated as WC) because compression and coherency were mutually
exclusive. Starting with Xe3, hardware supports combining compression
with 1-way coherency, allowing compressible surfaces to be allocated as
WB memory. This provides applications with more efficient memory
allocation by avoiding WC allocation overhead that can cause system
stuttering and memory management challenges.
The implementation adds support for compressed+coherent PAT entry for
the xe3_lpg devices and updates the driver logic to handle the new
compression capabilities.
v2: (Matthew Auld)
- Improved error handling with XE_IOCTL_DBG()
- Enhanced documentation and comments
- Fixed xe_bo_needs_ccs_pages() outdated compression assumptions
v3:
- Improve WB compression support detection by checking PAT table
instead of version check
v4:
- Add XE_CACHE_WB_COMPRESSION, which simplifies the logic.
v5:
- Use U16_MAX for the invalid PAT index. (Matthew Auld)
Bspec: 71582, 59361, 59399
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260109093007.546784-1-x.wang@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Move the cpuidle driver check from __acpi_processor_start() to
acpi_processor_power_init() which allows variable acpi_idle_driver to
become static.
No intentional functional impact.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-7-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that acpi_processor_power_init() and acpi_processor_power_exit()
don't need to return any values because their callers don't check them
anyway, so redefine those functions as void.
While at it, rearrange the code in acpi_processor_power_init() to
reduce the indentation level, get rid of a redundant local variable
in that function, and rephrase a code comment in it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-5-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init() and acpi_processor_power_init() does
not register an idle driver any more.
Accordingly, the cpuidle driver check in __acpi_processor_start() needs
to be updated to avoid calling acpi_processor_power_init() without a
cpuidle driver, in which case the registration of the cpuidle device
in that function would lead to a NULL pointer dereference in
__cpuidle_register_device().
Fixes: 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle driver registration")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-4-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, the ACPI idle driver is registered from within a CPU
hotplug callback. Although this didn't cause any functional issues,
this is questionable and confusing. And it is better to register
the cpuidle driver when all of the CPUs have been brought up.
So add a new function to initialize acpi_idle_driver based on the
power management information of an available CPU and register cpuidle
driver in acpi_processor_driver_init().
This commit has four changes under the commit 7a8c994cbb2d (ACPI:
processor: idle: Optimize ACPI idle driver registration):
1) move acpi_processor_register_idle_driver() ahead of the
driver_register().
2) add acpi_processor_cstate_first_run_checks() before calling
acpi_processor_get_power_info().
3) squash the commit 9d68320b2bca (ACPI: processor: idle: Fix
function defined but not used warning) into this change.
4) use for_each_possible_cpu(cpu) to scan all possible cpus.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
[ rjw: New comment edits, changelog tweak ]
Link: https://patch.msgid.link/20251223100914.2407069-2-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The unlikely() annotation on the early-return condition in menu_select()
is incorrect on systems with only one idle state (e.g., ARM64 servers
with a single ACPI LPI state). Branch profiling shows 100% misprediction
on such systems since drv->state_count <= 1 is always true.
On platforms where only state0 is available, this path is the common
case, not an unlikely edge case. Remove the misleading annotation to
let the branch predictor learn the actual behavior.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260105-annotated_idle-v1-1-10ddf0771b58@debian.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add PCI_VENDOR_ID_ASPEED to the shared pci_ids.h header and remove the
duplicate local definition from ehci-pci.c.
This prepares for adding a PCI quirk for ASPEED devices.
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20251217154529.377586-1-nirmoyd@nvidia.com
|
|
Replace NULL check with IS_ERR_OR_NULL() check after calling
rockchip_clk_register_gate_link() since this function
returns error pointers (ERR_PTR).
Fixes: c62fa612cfa6 ("clk: rockchip: implement linked gate clock support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20250805030358.3665878-1-linmq006@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the dw-hdmi-qp driver to handle devices with missing
HPD pins.
Since in this situation we are now polling for the EDID data via i2c
change the error message to a rate limited debug message when we are
unable to complete an i2c read, as a disconnected device would
otherwise fill dmesg with i2c read errors.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251119225526.70588-3-macroalpha82@gmail.com
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251031104846.119503-3-marco.crivellari@suse.com
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251031104846.119503-2-marco.crivellari@suse.com
|
|
divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0e56e3369b60 ("clk: qcom: alpha-pll: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260108-clk-divider-round-rate-v1-14-535a3ed73bf3@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
In many functions the Return section is missing. Fix kernel-doc
descriptions to address that and other warnings.
Before the change:
$ scripts/kernel-doc -none -Wreturn drivers/net/ethernet/intel/idpf/idpf_txrx.c 2>&1 | wc -l
85
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf_up_complete() function always returns 0 and no callers use this return
value. Although idpf_vport_open() checks the return value, it only handles
error cases which never occur. Change the return type to void to simplify
the code.
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On some high-core systems (like AMD EPYC Bergamo, Intel Clearwater
Forest) loading ice driver with default values can lead to queue/irq
exhaustion. It will result in no additional resources for SR-IOV.
In most cases there is no performance reason for more than half
num_cpus(). Limit the default value to it using generic
netif_get_num_default_rss_queues().
Still, using ethtool the number of queues can be changed up to
num_online_cpus(). It can be done by calling:
$ethtool -L ethX combined $(nproc)
This change affects only the default queue amount.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for 10G-BX modules, i.e. 10GBit Ethernet over a single strand
Single-Mode fiber.
The initialization of a 10G-BX SFP+ is the same as for a 10G SX/LX module,
and is identified according to SFF-8472 table 5-3, footnote 3 by the
10G Ethernet Compliance Codes field being empty, the Nominal Bit
Rate being compatible with 12.5GBit, and the module being a fiber module
with a Single Mode fiber link length.
This was tested using a Lightron WSPXG-HS3LC-IEA 1270/1330nm 10km
transceiver:
$ sudo ethtool -m enp1s0f1
Identifier : 0x03 (SFP)
Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
Connector : 0x07 (LC)
Transceiver codes : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Encoding : 0x01 (8B/10B)
BR Nominal : 10300MBd
Rate identifier : 0x00 (unspecified)
Length (SMF) : 10km
Length (OM2) : 0m
Length (OM1) : 0m
Length (Copper or Active cable) : 0m
Length (OM3) : 0m
Laser wavelength : 1330nm
Vendor name : Lightron Inc.
Vendor OUI : 00:13:c5
Vendor PN : WSPXG-HS3LC-IEA
Vendor rev : 0000
Option values : 0x00 0x1a
Option : TX_DISABLE implemented
BR margin max : 0%
BR margin min : 0%
Vendor SN : S142228617
Date code : 140611
Optical diagnostics support : Yes
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unify handling of PHY firmware load delays across all E800 family
devices. There is an existing mechanism to poll GL_MNG_FWSM_FW_LOADING_M
bit of GL_MNG_FWSM register in order to verify whether PHY FW loading
completed or not. Previously, this logic was limited to E827 variants
only.
Also, inform a user of possible delay in initialization process, by
dumping informational message in dmesg log ("Link initialization is
blocked by PHY FW initialization. Link initialization will continue
after PHY FW initialization completes.").
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Remove ASPM L0s support for MSM8996 SoC since we now enable L0s when
advertised, and it caused random hangs on this device (Manivannan
Sadhasivam)
- Fix meson-pcie to report that the link is up while in ASPM L0s or L1,
since those are active states from the software point of view, and
treating the link as down caused config access failures (Bjorn
Helgaas)
- Fix up sparc DTS BAR descriptions that are above 4GB but not marked
as prefetchable, which caused resource assignment and driver probe
failures after we converted from the SPARC pcibios_enable_device() to
the generic version (Ilpo Järvinen)
* tag 'pci-v6.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
sparc/PCI: Correct 64-bit non-pref -> pref BAR resources
PCI: meson: Report that link is up while in ASPM L0s and L1 states
PCI: qcom: Remove ASPM L0s support for MSM8996 SoC
|
