| Age | Commit message (Collapse) | Author |
|---|
|
Add VID/PID 0411/03d1 for recently released
BUFFALO WI-U2-866DM USB WiFi adapter.
Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250503003227.6673-1-wf.yn386@gmail.com
|
|
Some users have RTL8723DS chips with nearly blank efuse. Currently these
chips cannot connect when using rtw88, but they do work using the old
out-of-tree driver.
Use reasonable default values for TX power, antenna configuration, and
crystal cap if the chip's efuse is missing these things.
RTL8723D can use the same default values as RTL8703B, so simply move
the code from rtl8703b_read_efuse() to the shared function
__rtl8723x_read_efuse().
Link: https://github.com/lwfinger/rtw88/issues/157
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/5734afe7-0870-40b2-acd4-5657a02d7c56@gmail.com
|
|
Use the same RX aggregation size and timeout used by the out-of-tree
RTL8723DS driver. Also set mystery bit 31 of REG_RXDMA_AGG_PG_TH. This
improves the RX speed from ~44 Mbps to ~67 Mbps.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/4c79fdc1-54bc-4986-9931-bb3ceb418b97@gmail.com
|
|
This patch adds support for MAC level VLAN tag stripping for the
dwxgmac2 IP. This feature can be configured through ethtool.
If the rx-vlan-offload is off, then the VLAN tag will be stripped
by the driver. If the rx-vlan-offload is on then the VLAN tag
will be stripped by the MAC.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250507063812.34000-4-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With the VLAN handling code decoupled from dwmac4 and dwxgmac2 and
consolidated in stmmac_vlan.c, functions and symbols are renamed to
use a generic prefix. This change improves code clarity and
maintainability by reflecting the shared nature of the VLAN logic,
facilitating future enhancements or reuse without being tied to
specific MAC implementations.
No functional changes are introduced in this patch.
Note: The dwxgmac2_update_vlan_hash function is not combined due
to minor differences in setting the VTFE bit. A separate fix patch
will be submitted to align its behavior with the dwmac4 driver.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Link: https://patch.msgid.link/20250507063812.34000-3-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor VLAN implementation by moving common code for DWMAC4 and
DWXGMAC IPs into a separate VLAN module. VLAN implementation for
DWMAC4 and DWXGMAC differs only for CSR base address, the descriptor
for the VLAN ID and VLAN VALID bit field.
The descriptor format for VLAN is not moved to the common code due
to hardware-specific differences between DWMAC4 and DWXGMAC.
For the DWMAC4 IP, the Receive Normal Descriptor 0 (RDES0) is
formatted as follows:
31 0
------------------------ -----------------------
RDES0| Inner VLAN TAG [31:16] | Outer VLAN TAG [15:0] |
------------------------ -----------------------
For the DWXGMAC IP, the RDES0 format varies based on the
Tunneled Frame bit (TNP):
a) For Non-Tunneled Frame (TNP=0)
31 0
------------------------ -----------------------
RDES0| Inner VLAN TAG [31:16] | Outer VLAN TAG [15:0] |
------------------------ -----------------------
b) For Tunneled Frame (TNP=1)
31 8 7 3 2 0
--------------------- ------------------ -------
RDES0| VNID/VSID | Reserved | OL2L3 |
--------------------- ------------------ ------
The logic for handling tunneled frames is not yet implemented
in the dwxgmac2_wrback_get_rx_vlan_tci() function. Therefore,
it is prudent to maintain separate functions within their
respective descriptor driver files
(dwxgmac2_descs.c and dwmac4_descs.c).
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Link: https://patch.msgid.link/20250507063812.34000-2-boon.khai.ng@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the mvpp2 driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Note that on the !port->hwtstamp condition, the old code used to fall
through in mvpp2_ioctl(), and return either -ENOTSUPP if !port->phylink,
or -EOPNOTSUPP, in phylink_mii_ioctl(). Keep the test for port->hwtstamp
in the newly introduced net_device_ops, but consolidate the error code
to just -EOPNOTSUPP. The other one is documented as NFS-specific, it's
best to avoid it anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508144630.1979215-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the gianfar driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Don't propagate the unnecessary "config.flags = 0;" assignment to
gfar_hwtstamp_get(), because dev_get_hwtstamp() provides a zero
initialized struct kernel_hwtstamp_config.
After removing timestamping logic from gfar_ioctl(), the rest is
equivalent to phy_do_ioctl_running(), so provide that directly as our
ndo_eth_ioctl() implementation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LS1021A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508143659.1944220-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow SIOCGHWTSTAMP to retrieve the current timestamping settings on
DPNIs. This reflects what has been done in dpaa2_eth_hwtstamp_set().
Tested with hwstamp_ctl -i endpmac17. Before the change, it prints
"Device driver does not have support for non-destructive SIOCGHWTSTAMP."
After the change, it retrieves the previously set configuration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LX2160A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508134102.1747075-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the DPAA2 Ethernet driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
This driver only responds to SIOCSHWTSTAMP (not SIOCGHWTSTAMP) so
convert just that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LX2160A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508134102.1747075-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_mii_ioctl() handles multiple ioctls in addition to just
SIOCGMIIREG: SIOCGMIIPHY, SIOCSMIIREG. Don't filter these out.
Also, phylink can handle the case where net_dev->phydev is NULL (like
optical SFP module, fixed-link). Be like other drivers and let phylink
do so without any driver-side call filtering.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow SIOCGHWTSTAMP to retrieve the current timestamping settings
on DPAA1 interfaces. This reflects what has been done in
dpaa_hwtstamp_set().
Tested with hwstamp_ctl -i fm1-mac9.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the DPAA1 driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
This driver only responds to SIOCSHWTSTAMP (not SIOCGHWTSTAMP) so
convert just that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert DSA to the new API, so that the ndo_eth_ioctl() path can
be removed completely.
Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set()
calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and
dsa_user_hwtstamp_set().
Due to the fact that the underlying ifreq type changes to
kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end,
all hooked up directly or indirectly, must also be converted all at once.
The conversion also updates the comment from dsa_port_supports_hwtstamp(),
which is no longer true because kernel_hwtstamp_config is kernel memory
and does not need copy_to_user(). I've deliberated whether it is
necessary to also update "err != -EOPNOTSUPP" to a more general "!err",
but all drivers now either return 0 or -EOPNOTSUPP.
The existing logic from the ocelot_ioctl() function, to avoid
configuring timestamping if the PHY supports the operation, is obsoleted
by more advanced core logic in dev_set_hwtstamp_phylib().
This is only a partial preparation for proper PHY timestamping support.
None of these switch driver currently sets up PTP traps for PHY
timestamping, so setting dev->see_all_hwtstamp_requests is not yet
necessary and the conversion is relatively trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_tx_timestamp() is used for tx software timestamp enabled by
SOF_TIMESTAMPING_TX_SOFTWARE while SKBTX_HW_TSTAMP is used for
SOF_TIMESTAMPING_TX_HARDWARE. As it clearly shows they are different
timestamps in two dimensions, it's not appropriate to group these two
together in the if-statement.
This patch completes three things:
1. make the software one standalone. Users are able to set both
timestamps together with SOF_TIMESTAMPING_OPT_TX_SWHW flag.
2. make the software one generated after the hardware timestamp logic to
avoid generating sw and hw timestamps at one time without
SOF_TIMESTAMPING_OPT_TX_SWHW being set.
3. move the software timestamp call as close to the door bell.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250508034433.14408-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The of_overlay_mutex_unlock() was accidentally deleted if "of_root" is
NULL. Change this to a goto unlock.
Fixes: d1eabd218ede ("of: unittest: treat missing of_root as error instead of fixing up")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/aBHZ1DvXiBcZkWmk@stanley.mountain
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Update max processor count to reflect the number of co-processors on
upcoming SoC.
Signed-off-by: Unnathi Chalicheemala <unnathi.chalicheemala@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250424-smem_count-v1-1-931cf68f71a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The SHM bridge makes the SM7150 devices reset while probing the RMTFS
(in qcom_scm_assign_mem()). Blacklist the SHM Bridge on corresponding
platforms using SoC-level compat string.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250422213137.80366-13-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SM7150 protection domains are the same as SC7180, with the subtle
difference that SM7150 has a CDSP.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250422213137.80366-11-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The PMIC GLINK driver is currently generating DisplayPort hotplug
notifications whenever something is connected to (or disconnected from)
a port regardless of the type of notification sent by the firmware.
These notifications are forwarded to user space by the DRM subsystem as
connector "change" uevents:
KERNEL[1556.223776] change /devices/platform/soc@0/ae00000.display-subsystem/ae01000.display-controller/drm/card0 (drm)
ACTION=change
DEVPATH=/devices/platform/soc@0/ae00000.display-subsystem/ae01000.display-controller/drm/card0
SUBSYSTEM=drm
HOTPLUG=1
CONNECTOR=36
DEVNAME=/dev/dri/card0
DEVTYPE=drm_minor
SEQNUM=4176
MAJOR=226
MINOR=0
On the Lenovo ThinkPad X13s and T14s, the PMIC GLINK firmware sends two
identical notifications with orientation information when connecting a
charger, each generating a bogus DRM hotplug event. On the X13s, two
such notification are also sent every 90 seconds while a charger remains
connected, which again are forwarded to user space:
port = 1, svid = ff00, mode = 255, hpd_state = 0
payload = 01 00 00 00 00 00 00 ff 00 00 00 00 00 00 00 00
Note that the firmware only sends on of these when connecting an
ethernet adapter.
Fix the spurious hotplug events by only forwarding hotplug notifications
for the Type-C DisplayPort service id. This also reduces the number of
uevents from four to two when an actual DisplayPort altmode device is
connected:
port = 0, svid = ff01, mode = 2, hpd_state = 0
payload = 00 01 02 00 f2 0c 01 ff 03 00 00 00 00 00 00 00
port = 0, svid = ff01, mode = 2, hpd_state = 1
payload = 00 01 02 00 f2 0c 01 ff 43 00 00 00 00 00 00 00
Fixes: 080b4e24852b ("soc: qcom: pmic_glink: Introduce altmode support")
Cc: stable@vger.kernel.org # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Reported-by: Clayton Craft <clayton@craftyguy.net>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Clayton Craft <clayton@craftyguy.net>
Link: https://lore.kernel.org/r/20250324132448.6134-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
mbox_request_channel() returning value was changed in case of error.
It uses returning value of of_parse_phandle_with_args().
It is returning with -ENOENT instead of -ENODEV when no mboxes property
exists.
Fixes: 24fdd5074b20 ("mailbox: use error ret code of of_parse_phandle_with_args()")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org> # msm8939
Link: https://lore.kernel.org/r/20250421-fix-qcom-smd-v1-2-574d071d3f27@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.16 (take two)
- Cover all R-Car drivers in the ARM/RISC-V/RENESAS ARCHITECTURE
maintainer entry,
- Identify the Renesas RZ/V2N (R9A09G056) SoC.
* tag 'renesas-drivers-for-v6.16-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rz-sysc: Add SoC identification for RZ/V2N SoC
MAINTAINERS: Generalize ARM/RISC-V/RENESAS ARCHITECTURE
Link: https://lore.kernel.org/r/cover.1746798752.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
AMD-TEE driver updates for v6.16
- Sort header includes
- Use pr_fmt
* tag 'amd-tee-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
amdtee: Sort header includes
amdtee: Use pr_fmt for messages
Link: https://lore.kernel.org/r/20250509065833.GB4188600@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
HiSilicon driver updates for v6.16
- Simplify PCC shared memory region handling in HCCS driver
* tag 'hisi-drivers-for-6.16' of https://github.com/hisilicon/linux-hisi:
soc: hisilicon: kunpeng_hccs: Simplify PCC shared memory region handling
Link: https://lore.kernel.org/r/681D9FC4.6080508@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.16
1. Mediatek: Add support for MT6893 MTK SMI.
2. STM32: Add new driver for STM32 Octo Memory Manager (OMM), which
manages muxing between two OSPI busses.
3. Several cleanups and minor improvements (OMAP GPMC, Kconfig entries,
BT1 L2).
* tag 'memory-controller-drv-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
MAINTAINERS: add entry for STM32 OCTO MEMORY MANAGER driver
memory: Add STM32 Octo Memory Manager driver
dt-bindings: memory-controllers: Add STM32 Octo Memory Manager controller
bus: firewall: Fix missing static inline annotations for stubs
memory: bt1-l2-ctl: replace scnprintf() with sysfs_emit()
memory: mtk-smi: Add support for Dimensity 1200 MT6893 SMI
dt-bindings: memory: mtk-smi: Add support for MT6893
memory: tegra: Do not enable by default during compile testing
memory: Simplify 'default' choice in Kconfig
memory: omap-gpmc: remove GPIO set() and direction_output() callbacks
memory: omap-gpmc: use the dedicated define for GPIO direction
Link: https://lore.kernel.org/r/20250508093451.55755-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Renesas memory controller drivers for v6.16
Improvements and new device support for the Renesas RPC IF memory
controller driver:
1. Minor cleanup and improvements.
2. Refactor the driver to accommodate for newly added Renesas RZ/G3E support:
- Acquire two resets instead of only one,
- Add RZ/G3E xSPI support with different register layout and its own,
new interface for Renesas SPI.
* tag 'memory-controller-drv-renesas-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: renesas-rpc-if: Add missing static keyword
memory: renesas-rpc-if: Add RZ/G3E xSPI support
memory: renesas-rpc-if: Add wrapper functions
memory: renesas-rpc-if: Add regmap to struct rpcif_info
memory: renesas-rpc-if: Use devm_reset_control_array_get_exclusive()
memory: renesas-rpc-if: Move rpc-if reg definitions
dt-bindings: memory: Document RZ/G3E support
memory: renesas-rpc-if: Move rpcif_info definitions near to the user
memory: renesas-rpc-if: Fix RPCIF_DRENR_CDB macro error
Link: https://lore.kernel.org/r/20250508090749.51379-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.16
1. Quirk framework to handle buggy firmware
With SCMI gaining broader adoption across arm64 platforms, it's
increasingly important to address how we consistently manage out-of-spec
SCMI firmware already deployed in the field. This change introduces a
lightweight quirk framework built around static_keys, enabling developers to:
- Define quirks and their match criteria, which can include:
o A list of compatibles ({ comp, comp2, NULL })
o Vendor ID / Sub-Vendor ID
o Firmware implementation version ranges ([Min_Vers, Max_Vers])
Matching proceeds from the most specific (longest match) to the least
specific. NULL entries are treated as wildcards (i.e., match any value).
This flexibility allows matching very specific combinations or just a
general compatible string.
The quirk code blocks/snippets implementing the workaround are placed near
their intended usage and guarded by a static_key that's tied to the quirk.
Once the SCMI core stack is initialized and retrieves platform info via the
base protocol, any matching quirks will have their associated static_keys
enabled.
2. Quirk for Qualcomm X1E platforms
On some Qualcomm X1E platforms, such as the Lenovo ThinkPad T14s, the
SCMI firmware fails to set the FastChannel support bit for PERF_LEVEL_GET,
yet it crashes when the driver attempts to fall back to standard messaging
which is clearly out-of-spec behavior.
To work around this, the new SCMI quirk framework is used to
unconditionally enable FC initialization for this firmware version.
In the future, once the fixed firmware version is identified, an upper
version bound can be added to the quirk match criteria. Alternatively,
matching can be further restricted using a SoC-specific compatible string
if always enabling FC proves problematic elsewhere.
3. Support for NXP i.MX LMM/CPU vendor protocol extensions
The i.MX95 System Manager (SM) implements Logical Machine Management (LMM)
and a CPU protocol to manage Logical Machines (LM) and CPUs (e.g., M7).
These changes integrate the vendor-specific protocol extensions
implementing the LMM and CPU protocols for the i.MX95, facilitating
standardized communication between the operating system and the platform's
firmware, which will be used by remoteproc drivers. The changes also
include the necessary device tree bindings.
4. Miscellaneous cleanups/changes
These mainly include polling support in SCMI raw mode. The cleanups
centralize error logging for SCMI device creation into a single helper
function, consolidate the device matching logic into a single function, and
ensure that devices must have a name for registration—removing support for
unnamed devices when matching drivers and devices for probing. Transport
devices are now excluded from bus matching, and the correct assignment of
the parent device for the arm-scmi platform device is ensured in the
transport drivers.
* tag 'scmi-updates-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: quirk: Force perf level get fastchannel
firmware: arm_scmi: quirk: Fix CLOCK_DESCRIBE_RATES triplet
firmware: arm_scmi: Add common framework to handle firmware quirks
firmware: arm_scmi: Ensure that the message-id supports fastchannel
MAINTAINERS: add entry for i.MX SCMI extensions
firmware: imx: Add i.MX95 SCMI CPU driver
firmware: imx: Add i.MX95 SCMI LMM driver
firmware: arm_scmi: imx: Add i.MX95 CPU Protocol
firmware: arm_scmi: imx: Add i.MX95 LMM protocol
dt-bindings: firmware: Add i.MX95 SCMI LMM and CPU protocol
firmware: arm_scmi: imx: Add LMM and CPU documentation
firmware: arm_scmi: Add polling support to raw mode
firmware: arm_scmi: Exclude transport devices from bus matching
firmware: arm_scmi: Assign correct parent to arm-scmi platform device
firmware: arm_scmi: Refactor error logging from SCMI device creation to single helper
firmware: arm_scmi: Refactor device matching logic to eliminate duplication
firmware: arm_scmi: Ensure scmi_devices are always matched by name as well
Link: https://lore.kernel.org/r/20250507134713.49039-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/drivers
MediaTek driver updates for v6.16
This brings some cleanups to the MediaTek DVFSRC driver, commonizing
the bandwidth constraints platform data, and also adds support for
the DVFSRC hardware found in the MediaTek Dimensity 1200 MT6893 SoC.
* tag 'mtk-soc-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
soc: mediatek: mtk-dvfsrc: remove an unused variable
soc: mediatek: mtk-dvfsrc: Add support for Dimensity 1200 MT6893
soc: mediatek: mtk-dvfsrc: Rename and move bw constraints data
dt-bindings: soc: mediatek: dvfsrc: Add support for MT6893
Link: https://lore.kernel.org/r/20250506091736.125733-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
This pull request contains Broadcom SoC driver updates for 6.16, please
pull the following:
- Ovidiu updates the brcmstb_gisb driver to use the dev_groups instead
of manually adding those
* tag 'arm-soc/for-6.16/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: use dev_groups to register attribute groups
Link: https://lore.kernel.org/r/20250505165810.1948927-3-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and 1.88.0
releases
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function
* tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88
rust: clean Rust 1.88.0's `clippy::uninlined_format_args` lint
rust: clean Rust 1.88.0's warning about `clippy::disallowed_macros` configuration
rust: clean Rust 1.88.0's `unnecessary_transmutes` lint
rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
objtool/rust: add one more `noreturn` Rust function for Rust 1.87.0
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16
Several improvements to Exynos ACPM (Alive Clock and Power Manager)
driver:
1. Handle communication timeous better.
2. Avoid sleeping, so users (PMIC) can still transfer during system
shutdown.
3. Fix reading longer messages from them firmware.
4. Deferred probe improvements.
5. Model the user of ACPM - PMIC - a as child device and export
devm_acpm_get_by_node() for such use case.
* tag 'samsung-drivers-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: Correct kerneldoc and use typical np argument name
firmware: exynos-acpm: introduce devm_acpm_get_by_node()
firmware: exynos-acpm: populate devices from device tree data
firmware: exynos-acpm: silence EPROBE_DEFER error on boot
firmware: exynos-acpm: fix reading longer results
dt-bindings: firmware: google,gs101-acpm-ipc: add PMIC child node
firmware: exynos-acpm: allow use during system shutdown
firmware: exynos-acpm: use ktime APIs for timeout detection
Link: https://lore.kernel.org/r/20250501103541.13795-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.16
- Enable all Renesas SoCs by default when ARCH_RENESAS is set, which
will allow up to remove all individual Renesas SoC entries from the
various defconfigs,
- Initial support for the Renesas RZ/V2N (R9A09G056) SoC.
* tag 'renesas-drivers-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Add config option for RZ/V2N (R9A09G056) SoC
soc: renesas: Kconfig: Enable SoCs by default when ARCH_RENESAS is set
Link: https://lore.kernel.org/r/cover.1745582592.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Smatch complains that %pa is for phys_addr_t types and "size" is a u64.
drivers/cxl/core/hdm.c:521 cxl_dpa_alloc() error: '%pa' expects
argument of type 'phys_addr_t*', argument 4 has type 'ullong*
Looking at this, to me it seems more useful to print the sizes as
decimal instead of hex. Let's do that.
[dj: Adjusted based on latest code changes. ]
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/3d3d969d-651d-4e9d-a892-900876a60ab5@moroto.mountain
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Indirect Target Selection (ITS) is a bug in some pre-ADL Intel CPUs with
eIBRS. It affects prediction of indirect branch and RETs in the
lower half of cacheline. Due to ITS such branches may get wrongly predicted
to a target of (direct or indirect) branch that is located in the upper
half of the cacheline.
Scope of impact
===============
Guest/host isolation
--------------------
When eIBRS is used for guest/host isolation, the indirect branches in the
VMM may still be predicted with targets corresponding to branches in the
guest.
Intra-mode
----------
cBPF or other native gadgets can be used for intra-mode training and
disclosure using ITS.
User/kernel isolation
---------------------
When eIBRS is enabled user/kernel isolation is not impacted.
Indirect Branch Prediction Barrier (IBPB)
-----------------------------------------
After an IBPB, indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB. This is
mitigated by a microcode update.
Add cmdline parameter indirect_target_selection=off|on|force to control the
mitigation to relocate the affected branches to an ITS-safe thunk i.e.
located in the upper half of cacheline. Also add the sysfs reporting.
When retpoline mitigation is deployed, ITS safe-thunks are not needed,
because retpoline sequence is already ITS-safe. Similarly, when call depth
tracking (CDT) mitigation is deployed (retbleed=stuff), ITS safe return
thunk is not used, as CDT prevents RSB-underflow.
To not overcomplicate things, ITS mitigation is not supported with
spectre-v2 lfence;jmp mitigation. Moreover, it is less practical to deploy
lfence;jmp mitigation on ITS affected parts anyways.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit bigger than last week, but overall amdgpu/xe
with some ivpu bits and a random few fixes, and dropping the
ttm_backup struct which wrapped struct file and was recently
frowned at.
drm:
- Fix overflow when generating wedged event
ttm:
- Fix documentation
- Remove struct ttm_backup
panel:
- simple: Fix timings for AUO G101EVN010
amdgpu:
- DC FP fixes
- Freesync fix
- DMUB AUX fixes
- VCN fix
- Hibernation fixes
- HDP fixes
xe:
- Prevent PF queue overflow
- Hold all forcewake during mocs test
- Remove GSC flush on reset path
- Fix forcewake put on error path
- Fix runtime warning when building without svm
i915:
- Fix oops on resume after disconnecting DP MST sinks during suspend
- Fix SPLC num_waiters refcounting
ivpu:
- Increase timeouts
- Fix deadlock in cmdq ioctl
- Unlock mutices in correct order
v3d:
- Avoid memory leak in job handling"
* tag 'drm-fixes-2025-05-10' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/i915/dp: Fix determining SST/MST mode during MTP TU state computation
drm/xe: Add config control for svm flush work
drm/xe: Release force wake first then runtime power
drm/xe/gsc: do not flush the GSC worker from the reset path
drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs
drm/xe: Add page queue multiplier
drm/amdgpu/hdp7: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp6: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5.2: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp5: use memcfg register to post the write for HDP flush
drm/amdgpu/hdp4: use memcfg register to post the write for HDP flush
drm/amdgpu: fix pm notifier handling
Revert "drm/amd: Stop evicting resources on APUs in suspend"
drm/amdgpu/vcn: using separate VCN1_AON_SOC offset
drm/amd/display: Fix wrong handling for AUX_DEFER case
drm/amd/display: Copy AUX read reply data whenever length > 0
drm/amd/display: Remove incorrect checking in dmub aux handler
drm/amd/display: Fix the checking condition in dmub aux handling
drm/amd/display: Shift DMUB AUX reply command if necessary
drm/amd/display: Call FP Protect Before Mode Programming/Mode Support
...
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose PCIe link downgrade attributes (Raag)
Cross-subsystem Changes:
Core Changes:
- gpusvm has_dma_mapping fix (Dafna)
Driver Changes:
- Forcewake hold fix (Tejas)
- Fix guc_info debugfs for VFs (Daniele)
- Fix devcoredump chunk alignment calculation (Arnd)
- Don't print timedout job message on killed exec queues (Matt Brost)
- Don't flush the GSC worker from the reset path (Daniele)
- Use copy_from_user() instead of __copy_from_user() (Harish)
- Only flush SVM garbage collector if CONFIG_DRM_XE_GPUSVM (Shuicheng)
- Fix forcewake vs runtime pm ref release ordering (Shuicheng)
- Move xe_device_sysfs_init() to xe_device_probe() (Raag)
- Append PCIe Gen5 limitations to xe_firmware document (Raag)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aBzUwbzCzz7Qo7fA@fedora
|
|
A single call to einj_get_available_error_type() in init function is
sufficient to save the return value in a global variable to be used
later in various places in the code.
This change has no functional impact, but only removes unnecessary
redundant function calls.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zaid Alali <zaidal@os.amperecomputing.com>
Link: https://patch.msgid.link/20250506213814.2365788-5-zaidal@os.amperecomputing.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add the TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
quirk list to prevent spurious wakeups.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20250508111625.12149-1-wse@tuxedocomputers.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The ACPI specification requires that battery rate is always positive,
but the kernel ABI for POWER_SUPPLY_PROP_CURRENT_NOW
(Documentation/ABI/testing/sysfs-class-power) specifies that it should
be negative when a battery is discharging. When reporting CURRENT_NOW,
massage the value to match the documented ABI.
This only changes the sign of `current_now` and not `power_now` because
documentation doesn't describe any particular meaning for `power_now` so
leaving `power_now` unchanged is less likely to confuse userspace
unnecessarily, whereas becoming consistent with the documented ABI is
worth potentially confusing clients that read `current_now`.
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Link: https://patch.msgid.link/20250508024146.1436129-1-pmarheine@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
drm/i915 fixes for v6.15-rc6:
- Fix oops on resume after disconnecting DP MST sinks during suspend
- Fix SPLC num_waiters refcounting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87tt5umeaw.fsf@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Prevent PF queue overflow
- Hold all forcewake during mocs test
- Remove GSC flush on reset path
- Fix forcewake put on error path
- Fix runtime warning when building without svm
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/jffqa56f2zp4i5ztz677cdspgxhnw7qfop3dd3l2epykfpfvza@q2nw6wapsphz
|
|
Coverity scan reported the usage of "mode->clock * 1000" may lead to
integer overflow. Use "1000ULL" instead of "1000"
when utilizing it to avoid potential integer overflow issue.
Link: https://scan5.scan.coverity.com/#/project-view/10074/10063?selectedIssue=1646759
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: 1017560164b6 ("drm/meson: use unsigned long long / Hz for frequency types")
Link: https://lore.kernel.org/r/20250505184338.678540-1-richard120310@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The fwnode_handle pointer passed into pci_register_io_range() is not
modified, so annotate it as const.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/7ae7866ab8b897253703ecee44c688b6832d49a3.1745552799.git.xiaopei01@kylinos.cn
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The vendor name for MECHREVO was incorrectly spelled in commit
b53f09ecd602 ("ACPI: resource: Do IRQ override on MECHREV GM7XG0M").
Correct this typo in this trivial patch.
Fixes: b53f09ecd602 ("ACPI: resource: Do IRQ override on MECHREV GM7XG0M")
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://patch.msgid.link/20250417073947.47419-1-jeffbai@aosc.io
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull block fixes from Jens Axboe:
- Fix for a regression in this series for loop and read/write iterator
handling
- zone append block update tweak
- remove a broken IO priority test
- NVMe pull request via Christoph:
- unblock ctrl state transition for firmware update (Daniel
Wagner)
* tag 'block-6.15-20250509' of git://git.kernel.dk/linux:
block: remove test of incorrect io priority level
nvme: unblock ctrl state transition for firmware update
block: only update request sector if needed
loop: Add sanity check for read/write_iter
|
|
In preparation for code changes related to AMD Zen5 address translation
support, a number of small code refactor and cleanups are send ahead.
|
|
Improve debugging by adding and unifying messages whenever a decoder
was added to a port. It is especially useful to get the decoder
mapping of the involved CXL host bridge or PCI device. This avoids a
complex lookup of the decoder/port/device mappings in sysfs.
Example log messages:
cxl_acpi ACPI0017:00: decoder0.0 added to root0
cxl_acpi ACPI0017:00: decoder0.1 added to root0
...
pci0000:e0: decoder1.0 added to port1
pci0000:e0: decoder1.1 added to port1
...
cxl_mem mem0: decoder5.0 added to endpoint5
cxl_mem mem0: decoder5.1 added to endpoint5
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250509150700.2817697-15-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Broken target lists are hard to discover as the driver fails at a
later initialization stage. Add an error message for this.
Example log messages:
cxl_mem mem1: failed to find endpoint6:0000:e0:01.3 in target list of decoder1.1
cxl_port endpoint6: failed to register decoder6.0: -6
cxl_port endpoint6: probe: 0
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: "Fabio M. De Francesco" <fabio.m.de.francesco@linux.intel.com>
Tested-by: Gregory Price <gourry@gourry.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250509150700.2817697-14-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
