| Age | Commit message (Collapse) | Author |
|---|
|
When transitioning from USB_ROLE_DEVICE to USB_ROLE_NONE, the code
assumed that the regulator should be disabled. However, if the regulator
is marked as always-on, regulator_is_enabled() continues to return true,
leading to an incorrect attempt to disable a regulator which is not
enabled.
This can result in warnings such as:
[ 250.155624] WARNING: CPU: 1 PID: 7326 at drivers/regulator/core.c:3004
_regulator_disable+0xe4/0x1a0
[ 250.155652] unbalanced disables for VIN_SYS_5V0
To fix this, we move the regulator control logic into
tegra186_xusb_padctl_id_override() function since it's directly related
to the ID override state. The regulator is now only disabled when the role
transitions from USB_ROLE_HOST to USB_ROLE_NONE, by checking the VBUS_ID
register. This ensures that regulator enable/disable operations are
properly balanced and only occur when actually transitioning to/from host
mode.
Fixes: 49d46e3c7e59 ("phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250502092606.2275682-1-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Periodic calibration updates (~10µs) may overlap with transfers when
PCIe NVMe SSD, LPDDR, and USB2 devices operate simultaneously, causing
crosstalk on Tegra234 devices. Hence disable periodic calibration updates
and make this a one-time calibration.
Fixes: d8163a32ca95 ("phy: tegra: xusb: Add Tegra234 support")
Cc: stable@vger.kernel.org
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250519090929.3132456-3-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The logic that drives the pad calibration values resides in the
controller reset domain and so the calibration values are only being
captured when the controller is out of reset. However, by clearing the
CYA_TRK_CODE_UPDATE_ON_IDLE bit, the calibration values can be set
while the controller is in reset.
The CYA_TRK_CODE_UPDATE_ON_IDLE bit was previously cleared based on the
trk_hw_mode flag, but this dependency is not necessary. Instead,
introduce a new flag, trk_update_on_idle, to independently control this
bit.
Fixes: d8163a32ca95 ("phy: tegra: xusb: Add Tegra234 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250519090929.3132456-2-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add support for Exynos7870 in the existing MIPI CSIS/DSIM driver. The
SoC has one DSIM phy and three CSIS phys.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250612-exynos7870-mipi-phy-v1-2-3fff0b62d9d3@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This commit adds a work item to handle events of 1394 OHCI AT
request/response contexts, and queues the item to the specific
workqueue. The call of struct fw_packet.callbaqck() is done in the
workqueue when receiving acknowledgement to the asynchronous packet
transferred to remote node.
Link: https://lore.kernel.org/r/20250615133253.433057-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
This commit adds a work item to handle events of 1394 OHCI AR
request/response contexts, and queues the item to the specific workqueue.
The call of struct fw_address_handler.address_callback() is done in the
workqueue when receiving any requests from the remove nodes. Additionally,
the call of struct fw_packet.callback() is done in the workqueue too when
receiving acknowledge to the asynchronous packet for the response
subaction of split transaction to the remote nodes.
Link: https://lore.kernel.org/r/20250615133253.433057-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Some tasklets (softIRQs) are still used as bottom-halves to handle
events for 1394 OHCI AR/AT contexts. However, using softIRQs for IRQ
bottom halves is generally discouraged today.
This commit adds a per-fw_card workqueue to accommodate the behaviour
specified by the 1394 OHCI specification.
According to the 1394 OHCI specification, system memory pages are
reserved for each asynchronous DMA context. This allows concurrent
operation across contexts. In the 1394 OHCI PCI driver implementation,
the hardware generates IRQs either upon receiving asynchronous packets
from other nodes (incoming) or after completing transmission to them
(outgoing). These independent events can occur in the same transmission
cycle, therefore the max_active parameter for the workqueue is set to the
total number of AR/AT contexts (=4). The WQ_UNBOUND flag is used to
allow the work to be scheduled on any available core, since there is
little CPU cache affinity benefit for the data.
Each DMA context uses a circular descriptor list in system memory,
allowing deferred data processing in software as long as buffer overrun
are avoided. Since the overall operation is sleepable except for small
atomic regions, WQ_BH is not used. As the descriptors contain
timestamps, WQ_HIGHPRI is specified to support semi-real-time
processing.
The asynchronous context is also used by the SCSI over IEEE 1394
protocol implementation (sbp2), which can be part of memory reclaim paths.
Therefore, WQ_MEM_RECLAIM is required.
To allow uses to adjust CPU affinity according to workload, WQ_SYSFS is
specified so that workqueue attributes are exposed to user space.
Link: https://lore.kernel.org/r/20250615133253.433057-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Add ethqos_pcs_set_inband() to improve readability, and to allow future
changes when phylink PCS support is properly merged.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sa8775p-ride-r3
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1uPkbO-004EyA-EU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor the way firmware names are handled for the ICSSG PRUETH driver.
Instead of using hardcoded firmware name arrays for different modes (EMAC,
SWITCH, HSR), the driver now reads the firmware names from the device tree
property "firmware-name". Only the EMAC firmware names are specified in the
device tree property. The firmware names for all other supported modes are
generated dynamically based on the EMAC firmware names by replacing
substrings (e.g., "eth" with "sw" or "hsr") as appropriate.
Example: Below are the firmwares used currently for PRU0 core
EMAC: ti-pruss/am65x-sr2-pru0-prueth-fw.elf
SW : ti-pruss/am65x-sr2-pru0-prusw-fw.elf
HSR : ti-pruss/am65x-sr2-pru0-pruhsr-fw.elf
All three firmware names are same except for the operating mode.
In general for PRU0 core, firmware name is,
ti-pruss/am65x-sr2-pru0-pru<mode>-fw.elf
Since the EMAC firmware names are defined in DT, driver will read those
directly and for other modes swap the mode name. i.e. eth -> sw or
eth -> hsr.
This preserves backwards compatibility as ICSSG driver is supported only
by AM65x and AM64x. Both of these have "firmware-name" property
populated in their device tree.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613064547.44394-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250613102014.3070898-1-liyuesong@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fix from Joerg Roedel:
- Fix PTE size calculation for NVidia Tegra
* tag 'iommu-fixes-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra: Fix incorrect size calculation
|
|
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
|
|
The MBUS serves as the main data bus for various DMA masters in the
system. If its clock is not enabled, the DMA operations will stall,
leading to the peripherals stalling or timing out. This has been
observed as USB or MMC hosts timing out waiting for transactions
when the clock is automatically disabled by the CCF due to it not
being used.
Mark the clock as critical so that it never gets disabled.
Fixes: 74b0443a0d0a ("clk: sunxi-ng: a523: add system mod clocks")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250607135029.2085140-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"9 hotfixes. 3 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. Only 4 are for MM"
* tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: add mmap_prepare() compatibility layer for nested file systems
init: fix build warnings about export.h
MAINTAINERS: add Barry as a THP reviewer
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
mm: close theoretical race where stale TLB entries could linger
mm/vma: reset VMA iterator on commit_merge() OOM failure
docs: proc: update VmFlags documentation in smaps
scatterlist: fix extraneous '@'-sign kernel-doc notation
selftests/mm: skip failed memfd setups in gup_longterm
|
|
We want to WARN_ON() if info is NULL.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 0838fc3e6718 ("drm/msm/adreno: Check for recognized GPU before bind")
Tested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/658631/
|
|
The Exynos990 usbdrd PHY is a combo PHY which supports USB SS, HS and
DisplayPort outputs. This commit adds support only for UTMI+ (USB HS).
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250515-usb-resends-may-15-v3-2-ad33a85b6cee@mentallysanemainliners.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Windows code seems to do some dodgy looking +/-1 adjustments
to some of the vertical timings. Not sure if that's correct
or not, but let's at least cross check some of the values
we got from the hardware to double check whether the GOP
did the same or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314150136.22564-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
|
|
BXT_MIPI_TRANS_VTOTAL must be programmed with vtotal-1
instead of vtotal. Make it so.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314150136.22564-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Now that no SoC implements the .set_*_speed() methods, we can get rid
of these methods and the now unused code in rk_set_clk_tx_rate().
Arrange for the function to return an error when the .set_speed()
method is not implemented.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk3O-004CFx-Ir@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert px30_set_rmii_speed() to use the common .set_speed() method,
which eliminates another user of the older .set_*_speed() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk3J-004CFr-FE@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
px30_set_rmii_speed() doesn't need to be as verbose as it is - it
merely needs the values for the register and clock rate which depend
on the speed, and then call the appropriate functions. Rewrite the
function to make it so.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk3E-004CFl-BZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As a result of the previous patches, many of the .set_rgmii_speed()
and .set_rmii_speed() implementations are identical apart from the
interface mode. Add a new .set_speed() function which takes the
interface mode in addition to the speed, and use it to combine the
separate implementations, calling the common rk_set_reg_speed()
function.
Also convert rk_set_clk_mac_speed() to be called by this new method
pointer, rather than having these implementations called from both
.set_*_speed() methods.
Remove all the error messages from the .set_speed() methods, as these
return an error code which is propagated up to stmmac_mac_link_up()
which will print the error.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk39-004CFf-7a@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rk3568_set_gmac_speed() and rv1126_set_clk_mac_speed() are now
identical. Combine these so we have a single copy of this code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk34-004CFZ-3y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just like rk3568, there is no need to have separate RGMII and RMII
methods to set clk_mac_speed() as rgmii_clock() can be used to return
the clock rate for both RGMII and RMII interface modes. Combine these
two methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk2z-004CFT-0e@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a common pattern in the driver where many SoCs need to write a
single register with a value dependent on the interface mode and speed.
Rather than having a lot of repeated code, add some common functions
and a struct to contain the values to be written to a register to
select the RGMII and RMII speeds.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk2t-004CFN-Td@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than having lots of regmap_write()s to the same register but
with different values depending on the speed, reorganise the
functions to use a local variable for the value, and then have one
regmap_write() call to write it to the register. This reduces the
amount of code and is a step towards further reducing the code size.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk2o-004CFH-Q4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RK platforms support RGMII and/or RMII depending on the SoC. Detect
whether support for a SoC exists by whether the interface specific
set_to functions have been populated, and set the appropriate bits in
phylink's bitmap of interfaces.
This assumes all dwmac interfaces on a SoC have identical support,
but it should be noted that this is not true for RK3528 which only
supports RGMII on GMAC1. However, the existing code structure
permits RGMII to be configured on GMAC0 without complaint, so
preserve this behaviour even though it is incorrect to avoid
functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk2j-004CF6-Mf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement a new admin command and helper function to handle and obtain
CGU measurements for input pins.
Add new callback operations to control the dpll device-level feature
"phase offset monitor," allowing it to be enabled or disabled. If the
feature is enabled, provide users with measured phase offsets and
notifications.
Initialize PPS DPLL with new callback operations if the feature is
supported by the firmware.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-4-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new callback operations for a dpll device:
- phase_offset_monitor_get(..) - to obtain current state of phase offset
monitor feature from dpll device,
- phase_offset_monitor_set(..) - to allow feature configuration.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks.
Execute the set callback upon user requests.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-3-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add enum dpll_feature_state for control over features.
Add dpll device level attribute:
DPLL_A_PHASE_OFFSET_MONITOR - to allow control over a phase offset monitor
feature. Attribute is present and shall return current state of a feature
(enum dpll_feature_state), if the device driver provides such capability,
otherwie attribute shall not be present.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve the .set_clk_tx_rate() method error message to include the
PHY interface mode along with the speed, which will be helpful to
the RK implementations.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPjjx-0049r5-NN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the PHY reset logic includes a role-specific asymmetric delay
to avoid synchronized reset deadlocks, the previously used randomized
polling intervals are no longer necessary.
This patch removes the get_random_u32_below()-based logic and introduces
an adaptive polling strategy:
- Fast polling for a short time after link-down
- Slow polling if the link remains down
- Slower polling when the link is up
This balances CPU usage and responsiveness while avoiding reset
collisions. Additionally, the driver still relies on polling for
all link state changes, as interrupt support is not implemented,
and link-up events are not reliably signaled by the PHY.
The polling parameters are now documented in the updated top-of-file
comment.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that dp83tg720_soft_reset() introduces role-specific delays to avoid
reset synchronization deadlocks, the fixed 600ms post-reset delay in
dp83tg720_read_status() is no longer needed.
The new logic provides both the required MDC timing and link stabilization,
making the old empirical delay redundant and unnecessarily long.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a .soft_reset callback for the DP83TG720 PHY that issues a hardware
reset followed by an asymmetric post-reset delay. The delay differs
based on the PHY's master/slave role to avoid synchronized reset
deadlocks, which are known to occur when both link partners use
identical reset intervals.
The delay includes:
- a fixed 1ms wait to satisfy MDC access timing per datasheet, and
- an empirically chosen extra delay (97ms for master, 149ms for slave).
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The source and destination of some strcpy operations was the same.
Split out the part of the operations that needed to be done for those
particular calls so the unnecessary copy wasn't done.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506140756.EFXXvIP4-lkp@intel.com/
Signed-off-by: Corey Minyard <corey@minyard.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes for drivers.
The core change in the error handler is simply to translate an ALUA
specific sense code into a retry the ALUA components can handle and
won't impact any other devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: error: alua: I/O errors for ALUA state transitions
scsi: storvsc: Increase the timeouts to storvsc_timeout
scsi: s390: zfcp: Ensure synchronous unit_add
scsi: iscsi: Fix incorrect error path labels for flashnode operations
scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registers
scsi: core: ufs: Fix a hang in the error handler
|
|
Using a direct assignment instead of memcpy reduces the text segment
size from 0x273 bytes to 0x19b bytes in my case.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/af371f2a-42f3-4d94-80b9-3420380a3f6f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's no need to include phy.h and mutex.h in mdio-boardinfo.h.
However mdio-boardinfo.c included phy.h indirectly this way so far,
include it explicitly instead. Whilst at it, sort the included
headers properly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/86b7a1d6-9f9c-4d22-b3d8-5abdef0bb39a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Struct mdio_board_entry isn't used outside mdio-boardinfo.c, so remove
the definition from the header file.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/0afe52d0-6fe6-434a-9881-3979661ff7b0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Move declaration of variable bi into list_for_each_entry_safe()
- The return value of cb() effectively isn't used, this allows to simplify
the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/f6bbe242-b43d-4c2b-8c51-2cb2cefbaf59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Quiet week, only two pull requests came my way, xe has a couple of
fixes and then a bunch of fixes across the board, vc4 probably fixes
the biggest problem:
vc4:
- Fix infinite EPROBE_DEFER loop in vc4 probing
amdxdna:
- Fix amdxdna firmware size
meson:
- modesetting fixes
sitronix:
- Kconfig fix for st7171-i2c
dma-buf:
- Fix -EBUSY WARN_ON_ONCE in dma-buf
udmabuf:
- Use dma_sync_sgtable_for_cpu in udmabuf
xe:
- Fix regression disallowing 64K SVM migration
- Use a bounce buffer for WA BB"
* tag 'drm-fixes-2025-06-14' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/lrc: Use a temporary buffer for WA BB
udmabuf: use sgtable-based scatterlist wrappers
dma-buf: fix compare in WARN_ON_ONCE
drm/sitronix: st7571-i2c: Select VIDEOMODE_HELPERS
drm/meson: fix more rounding issues with 59.94Hz modes
drm/meson: use vclk_freq instead of pixel_freq in debug print
drm/meson: fix debug log statement when setting the HDMI clocks
drm/vc4: fix infinite EPROBE_DEFER loop
drm/xe/svm: Fix regression disallowing 64K SVM migration
accel/amdxdna: Fix incorrect PSP firmware size
|
|
Add the ability to enable optional slot clock into the pwrctrl driver.
This is used to enable slot clock in split-clock topologies, where the PCIe
host/controller supply and PCIe slot supply are not provided by the same
clock. The PCIe host/controller clock should be described in the controller
node as the controller clock, while the slot clock should be described in
controller bridge/slot subnode.
Example DT snippet:
&pcicontroller {
clocks = <&clk_dif 0>; /* PCIe controller clock */
pci@0,0 {
#address-cells = <3>;
#size-cells = <2>;
reg = <0x0 0x0 0x0 0x0 0x0>;
compatible = "pciclass,0604";
device_type = "pci";
clocks = <&clk_dif 1>; /* PCIe slot clock */
vpcie3v3-supply = <®_3p3v>;
ranges;
};
};
Example clock topology:
____________ ____________
| PCIe host | | PCIe slot |
| | | |
| PCIe RX<|==================|>PCIe TX |
| PCIe TX<|==================|>PCIe RX |
| | | |
| PCIe CLK<|======.. ..======|>PCIe CLK |
'------------' || || '------------'
|| ||
____________ || ||
| 9FGV0441 | || ||
| | || ||
| CLK DIF0<|======'' ||
| CLK DIF1<|==========''
| CLK DIF2<|
| CLK DIF3<|
'------------'
Immutable commit for Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
Cc: stable@vger.kernel.org
Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI APEI error injection driver failure that started to
occur after switching it over to using a faux device, address an EC
driver issue related to invalid ECDT tables, clean up the usage of
mwait_idle_with_hints() in the ACPI PAD driver, add a new IRQ override
quirk, and fix a NULL pointer dereference related to nosmp:
- Update the faux device handling code in the driver core and address
an ACPI APEI error injection driver failure that started to occur
after switching it over to using a faux device on top of that (Dan
Williams)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator
device) driver to match the function definition after recent
changes (Uros Bizjak)
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui)
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf)
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan)"
* tag 'acpi-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Use IRQ override on MACHENIKE 16P
ACPI: EC: Ignore ECDT tables with an invalid ID string
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
ACPI: PAD: Update arguments of mwait_idle_with_hints()
ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failure
driver core: faux: Quiet probe failures
driver core: faux: Suppress bind attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the cpupower utility installation, fix up the recently added
Rust abstractions for cpufreq and OPP, restore the x86 update
eliminating mwait_play_dead_cpuid_hint() that has been reverted during
the 6.16 merge window along with preventing the failure caused by it
from happening, and clean up mwait_idle_with_hints() usage in
intel_idle:
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh
Kumar)
- Do minor cleanups in the `# Safety` sections for cpufreq
abstractions added recently (Viresh Kumar)
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli)
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered
(Rafael Wysocki)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition after
recent changes (Uros Bizjak)"
* tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
rust: cpu: Add CpuId::current() to retrieve current CPU ID
rust: Use CpuId in place of raw CPU numbers
rust: cpu: Introduce CpuId abstraction
intel_idle: Update arguments of mwait_idle_with_hints()
cpufreq: Convert `/// SAFETY` lines to `# Safety` sections
cpupower: split unitdir from libdir in Makefile
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
|
|
Merge assorted ACPI updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() in the ACPI PAD (processor aggregator device)
driver to match the function definition after recent changes (Uros
Bizjak).
- Fix a NULL pointer dereference in the ACPI CPPC library that occurs
when nosmp is passed to the kernel in the command line (Yunhui Cui).
- Ignore ECDT tables with an invalid ID string to prevent using an
incorrect GPE for signaling events on some systems (Armin Wolf).
- Add a new IRQ override quirk for MACHENIKE 16P (Wentao Guan).
* acpi-pad:
ACPI: PAD: Update arguments of mwait_idle_with_hints()
* acpi-cppc:
ACPI: CPPC: Fix NULL pointer dereference when nosmp is used
* acpi-ec:
ACPI: EC: Ignore ECDT tables with an invalid ID string
* acpi-resource:
ACPI: resource: Use IRQ override on MACHENIKE 16P
|
|
4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
intended to put PCI devices into D0, but in doing so unintentionally
changed runtime PM initialization not to occur on devices that don't
support PCI PM. This caused a regression in vfio-pci due to an imbalance
with its use.
Adjust the logic in pci_pm_init() so that even if PCI PM isn't supported
runtime PM is still initialized.
Fixes: 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing")
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m7e8929d6421690dc8bd6dc639d86c2b4db27cbc4
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Closes: https://lore.kernel.org/linux-pci/20250424043232.1848107-1-superm1@kernel.org/T/#m40d277dcdb9be64a1609a82412d1aa906263e201
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Link: https://patch.msgid.link/20250611233117.61810-1-superm1@kernel.org
|
|
Merge cpuidle updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the merge window due to a problem with handling
"dead" SMT siblings, but this time prevent leaving them in C1 after
initialization by taking them online and back offline when a proper
cpuidle driver for the platform has been registered (Rafael Wysocki).
* pm-cpuidle:
intel_idle: Update arguments of mwait_idle_with_hints()
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, most minor apart from the OMAP
ones which disable some recent performance optimisations in some
non-standard cases where we could start driving the bus incorrectly.
The change to the stm32-ospi driver to use the newer reset APIs is a
fix for interactions with other IP sharing the same reset line in some
SoCs"
* tag 'spi-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-pci1xxxx: Drop MSI-X usage as unsupported by DMA engine
spi: stm32-ospi: clean up on error in probe()
spi: stm32-ospi: Make usage of reset_control_acquire/release() API
spi: offload: check offload ops existence before disabling the trigger
spi: spi-pci1xxxx: Fix error code in probe
spi: loongson: Fix build warnings about export.h
spi: omap2-mcspi: Disable multi-mode when the previous message kept CS asserted
spi: omap2-mcspi: Disable multi mode when CS should be kept asserted after message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One minor fix for a leak in the DT parsing code in the max20086 driver"
* tag 'regulator-fix-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max20086: Fix refcount leak in max20086_parse_regulators_dt()
|
