| Age | Commit message (Collapse) | Author |
|---|
|
The ice_get_vf_by_id() function is used to obtain a reference to a VF
structure based on its ID. The ice_sriov_set_msix_vec_count() function
needs to get a VF reference starting from the VF PCI device, and uses
pci_iov_vf_id() to get the VF ID. This pattern is currently uncommon in the
ice driver. However, the live migration module will introduce many more
such locations.
Add a helper wrapper ice_get_vf_by_dev() which takes the VF PCI device and
calls ice_get_vf_by_id() using pci_iov_vf_id() to get the VF ID.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 05c16687e0cc ("ice: set MSI-X vector count on VF") added support to
change the vector count for VFs as part of ice_sriov_set_msix_vec_count().
This function modifies and rebuilds the target VF with the requested number
of MSI-X vectors.
Future support for live migration will add a call to
ice_sriov_set_msix_vec_count() to ensure that a migrated VF has the proper
MSI-X vector count. In most cases, this request will be to set the MSI-X
vector count to its current value. In that case, no work is necessary.
Rather than requiring the caller to check this, update the function to
check and exit early if the vector count is already at the requested value.
This avoids an unnecessary VF rebuild.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_sriov_set_msix_vec_count() obtains the VF device ID in a strange
way by iterating over the possible VF IDs and calling
pci_iov_virtfn_devfn to calculate the device and function combos and
compare them to the pdev->devfn.
This is unnecessary. The pci_iov_vf_id() helper already exists which does
the reverse calculation of pci_iov_virtfn_devfn(), which is much simpler
and avoids the loop construction. Use this instead.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The live migration process will require configuring the target VF with the
data provided from the source host. A few helper functions in ice_sriov.c
and ice_virtchnl.c will be needed for this process, but are currently
static.
Expose these functions in their respective headers so that the live
migration module can use them during the migration process.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
A future change is going to need to call ice_vsi_update_l2tsel from a new
context outside of ice_virtchnl.c
Since this function deals with a generic VSI, move it into ice_lib.c to
enable calling it from other places in the ice driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The VF can program the RSS hash configuration over virtchnl. It does this
by sending a u64 bitmask which represents the current hash configuration.
It is not trivial to reverse the hardware configuration back to this hash
set for migration. Instead, save the value to the ice_vf structure when its
modified by the VF.
The rss_hashcfg value is an 8-byte field. Make room for it in ice_vf by
re-arranging some of the existing fields. There is a 4-byte gap after the
first_vector_idx, and a 4-byte gap between max_tx_rate and vf_states. Move
first_vector_idx into the later 4-byte gap, creating an 8 byte area where
rss_hashcfg can be placed. Also move the num_msix field near min_tx_rate,
filling 2 bytes of a 3 byte hole.
The end result of these changes enables placing the rss_hashcfg field into
the structure while also saving 8 bytes in size. It looks like there are a
handful of more possible cleanups to reduce the size even further, but
those have been left as a future cleanup.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The live migration driver will need to save and restore the Tx queue
context state from the hardware registers. This state contains both static
fields which do not change during Tx traffic as well as dynamic fields
which may change during Tx traffic.
Unlike the Rx context, the Tx queue context is accessed indirectly from
GLCOMM_QTX_CNTX_CTL and GLCOMM_QTX_CNTX_DATA registers. These registers are
shared by multiple PFs on the same PCIe card. Multiple PFs cannot safely
access the registers simultaneously, and there is no hardware semaphore or
logic to control access. To handle this, introduce the txq_ctx_lock to the
ice_adapter structure. This is similar to the ptp_gltsyn_time_lock. All PFs
on the same adapter share this structure, and use it to serialize access to
the registers to prevent error.
Add a new functions to get and set the Tx queue context through the
GLCOMM_QTX_CNTX_CTL interface. The hardware context values are stored in
the registers using the same packed format as the Admin Queue buffer.
The hardware buffer is 40 bytes wide, as it contains an additional 18 bytes
of internal state not sent with the Admin Queue buffer. For this reason, a
separate typedef and packing function must be used. We can share the same
packed fields definitions because we never need to unpack the internal
state. This is preferred, as it ensures the internal state is zero'd when
writing into HW, and avoids issues with reading by u32 registers into a
buffer of 22 bytes in length. Thanks to the typedefs, misuse of the API
with the wrong size buffer can easily be caught at compile time.
Note reading this data from hardware is essential because the current Tx
queue context may be different from the context as initially programmed by
the driver during VF initialization. When migrating a VF we must ensure the
target VF has identical context as the source VF did.
Co-developed-by: Yahui Cao <yahui.cao@intel.com>
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
https://github.com/pabeni/linux-devel
Paolo Abeni says:
====================
virtio: introduce GSO over UDP tunnel
Some virtualized deployments use UDP tunnel pervasively and are impacted
negatively by the lack of GSO support for such kind of traffic in the
virtual NIC driver.
The virtio_net specification recently introduced support for GSO over
UDP tunnel, this series updates the virtio implementation to support
such a feature.
Currently the kernel virtio support limits the feature space to 64,
while the virtio specification allows for a larger number of features.
Specifically the GSO-over-UDP-tunnel-related virtio features use bits
65-69.
The first four patches in this series rework the virtio and vhost
feature support to cope with up to 128 bits. The limit is set by
a define and could be easily raised in future, as needed.
This implementation choice is aimed at keeping the code churn as
limited as possible. For the same reason, only the virtio_net driver is
reworked to leverage the extended feature space; all other
virtio/vhost drivers are unaffected, but could be upgraded to support
the extended features space in a later time.
The last four patches bring in the actual GSO over UDP tunnel support.
As per specification, some additional fields are introduced into the
virtio net header to support the new offload. The presence of such
fields depends on the negotiated features.
New helpers are introduced to convert the UDP-tunneled skb metadata to
an extended virtio net header and vice versa. Such helpers are used by
the tun and virtio_net driver to cope with the newly supported offloads.
Tested with basic stream transfer with all the possible permutations of
host kernel/qemu/guest kernel with/without GSO over UDP tunnel support.
====================
Link: https://patch.msgid.link/cover.1751874094.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Once we have started a GT reset sequence, which includes stopping
GuC CTB communication, we should also cancel all ongoing H2G send-
recv requests, as either GuC is already dead, or due to imminent
reset GuC will not be able to reply, or due to internal cleanup
we will lose pending fences. With this we will report dedicated
-ECANCELED error instead of misleading -ETIME.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250709174038.1876-4-michal.wajdeczko@intel.com
|
|
In the state change helper we are already doing extra stuff,
move debug state logger there to cover all state changes.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250709174038.1876-3-michal.wajdeczko@intel.com
|
|
In this helper we are already doing much more than just setting
a new CT state and its name was little misleading. Rename it.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250709174038.1876-2-michal.wajdeczko@intel.com
|
|
The parameter threshold is with size in MiB, not in bits.
Correct it to avoid any confusion.
v2: s/mb/MiB, s/vram/VRAM, fix return section. (Michal)
Fixes: 30c399529f4c ("drm/xe: Document Xe PM component")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250708021450.3602087-2-shuicheng.lin@intel.com
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In order to support live migration, the ice driver will need to read
certain data from the Rx queue context. This is stored in the hardware in a
packed format.
Since we use <linux/packing.h> for the mapping between the packed hardware
format and the unpacked structure, it is trivial to enable unpacking
support via the unpack_fields() function.
Add the ice_unpack_rxq_ctx() function based on the unpack_fields() API.
Re-use the same field definitions from the packing implementation.
Add ice_copy_rxq_ctx_from_hw() to copy the Rx queue context data from the
hardware registers.
Use these to implement ice_read_rxq_ctx() which will return the Rx queue
context to the caller in its unpacked ice_rlan_ctx struct.
This will enable the migration logic access to the relevant data about the
Rx device queues. It can easily be copied to the target system as part of
the migration payload, where it will be used to configure the Rx queues.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc6).
No conflicts.
Adjacent changes:
Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
0a12c435a1d6 ("dt-bindings: net: sun8i-emac: Add A100 EMAC compatible")
b3603c0466a8 ("dt-bindings: net: sun8i-emac: Rename A523 EMAC0 to GMAC0")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The scan request validation function uses bitwise and instead
of logical and. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.3fbc1f27871b.I7a8ee91f463c1a2d9d8561c8232e196885d02c43@changeid
|
|
pcie/utils.h needs to include iwl-io.h for the iwl_read/iwl_write calls.
Add it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.716e8b54ebcb.If75c28a85b5ba4c2661bdf4ce20b97dbe7d2abb2@changeid
|
|
Remove the retake_ownership parameter from the sw_reset function, as it
was always set to true and is not needed by other opmodes.
Simplify the sw_reset API function.
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.0a103d021815.I2a3da6f83aa691496a53a548bd73bddd4d4d2db8@changeid
|
|
GF device is frozen on API 100, so it is not allowed to use FW APIs
higher than that. Make sure of that by assigning a MIN and MAX API range
for GF.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.3409de06db40.I2110ee6c0a2f5ff1e16156c5875f83d7a1723857@changeid
|
|
HR device is frozen on API 100, so it is not allowed to use FW APIs
higher than that. Make sure of that by assigning a MIN and MAX API range
for HR.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.ea54c00de44d.I47340ecaefbf40bb0bd254485d242b7f39df85b1@changeid
|
|
For newer MACs, the MVM opmode may be used for older firmware images
or when the RF isn't EHT/WiFi7 capable. List such devices in the PCI
device list when MLD isn't built.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.483c8112f655.Ic05530048fc0b67b1cd8772882a595d56b204e65@changeid
|
|
Transport gen2 didn't inform ME when the op mode is leaving.
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.abd840f5e998.I3a3fe174ea55a30daa04a0a3e9a6264913677045@changeid
|
|
Update iwl_poll_bits_mask to return 0 on success or an error code.
Remove timing information from the return value, as it is unused.
Signed-off-by: Itamar Shalev <itamar.shalev@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.f77b9f484a78.Iae8ef99a94e25c23044e2c36244cda2b55328447@changeid
|
|
FWs with this version are no longer supported on any device.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.22864efb5074.I51f270f8848970fd2ca1078c14ad31f4a8853e7d@changeid
|
|
FWs with this version are no longer supported on any device.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.1b9177bfbe1d.I53c1527cc5097f05df352b6f2f99282b00a5d7ac@changeid
|
|
Mark this structure as one of the structures that represent
WOWLAN_INFO_NOTIFICATION
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.19ebfa430c5c.Ie5aca3f0af11cc3137c6b6862a13777bae0cb06b@changeid
|
|
FWs with this version are no longer supported on any device.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.d92f63207232.I8961ffbe04d0d9439d48a17840497ac926967914@changeid
|
|
Stop supporting older FWs.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709230308.64f504f3690d.Idc95ca09101e52b4980b292945abe944c24fc5d1@changeid
|
|
JF device is frozen on API 77. This prevented us from bumping the
minimum FW API of SO (and get rid of older FWs). This is because SO can
be combined with JF and then FW API 77 should be used.
Now as we have separate FW API ranges for the mac and the crf, we can
define for JF its own FW API range. This will allow bumping the minimum
FW API of SO Independently.
Do that now.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250709200543.1628666-3-miriam.rachel.korenblit@intel.com
|
|
The option to set an api_version_min/max also to the RF was added.
In the case that both the MAC and the RF has a range defined, we take
the narrower range of both.
This doesn't work for non-overlapping ranges. In this case, we should
just take the lower range of both.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709200543.1628666-2-miriam.rachel.korenblit@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth.
Current release - regressions:
- tcp: refine sk_rcvbuf increase for ooo packets
- bluetooth: fix attempting to send HCI_Disconnect to BIS handle
- rxrpc: fix over large frame size warning
- eth: bcmgenet: initialize u64 stats seq counter
Previous releases - regressions:
- tcp: correct signedness in skb remaining space calculation
- sched: abort __tc_modify_qdisc if parent class does not exist
- vsock: fix transport_{g2h,h2g} TOCTOU
- rxrpc: fix bug due to prealloc collision
- tipc: fix use-after-free in tipc_conn_close().
- bluetooth: fix not marking Broadcast Sink BIS as connected
- phy: qca808x: fix WoL issue by utilizing at8031_set_wol()
- eth: am65-cpsw-nuss: fix skb size by accounting for skb_shared_info
Previous releases - always broken:
- netlink: fix wraparounds of sk->sk_rmem_alloc.
- atm: fix infinite recursive call of clip_push().
- eth:
- stmmac: fix interrupt handling for level-triggered mode in DWC_XGMAC2
- rtsn: fix a null pointer dereference in rtsn_probe()"
* tag 'net-6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
net/sched: sch_qfq: Fix null-deref in agg_dequeue
rxrpc: Fix oops due to non-existence of prealloc backlog struct
rxrpc: Fix bug due to prealloc collision
MAINTAINERS: remove myself as netronome maintainer
selftests/net: packetdrill: add tcp_ooo-before-and-after-accept.pkt
tcp: refine sk_rcvbuf increase for ooo packets
net/sched: Abort __tc_modify_qdisc if parent class does not exist
net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info
net: thunderx: avoid direct MTU assignment after WRITE_ONCE()
selftests/tc-testing: Create test case for UAF scenario with DRR/NETEM/BLACKHOLE chain
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
atm: clip: Fix infinite recursive call of clip_push().
atm: clip: Fix memory leak of struct clip_vcc.
atm: clip: Fix potential null-ptr-deref in to_atmarpd().
net: phy: smsc: Fix link failure in forced mode with Auto-MDIX
net: phy: smsc: Force predictable MDI-X state on LAN87xx
net: phy: smsc: Fix Auto-MDIX configuration when disabled by strap
net: stmmac: Fix interrupt handling for level-triggered mode in DWC_XGMAC2
rxrpc: Fix over large frame size warning
net: airoha: Fix an error handling path in airoha_probe()
...
|
|
These workarounds are not applicable for use by the VFs.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Signed-off-by: Jakub Kolakowski <jakub1.kolakowski@intel.com>
Link: https://lore.kernel.org/r/20250710103040.375610-2-jakub1.kolakowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
For normal hibernation, GPU do not need to be resumed in thaw since it is
not involved in writing the hibernation image. Skip resume in this case
can reduce the hibernation time.
On VM with 8 * 192GB VRAM dGPUs, 98% VRAM usage and 1.7TB system memory,
this can save 50 minutes.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-6-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
dev_pm_ops.thaw() is called in following cases:
* normal case: after hibernation image has been created.
* error case 1: creation of a hibernation image has failed.
* error case 2: restoration from a hibernation image has failed.
For normal case, it is called mainly for resume storage devices for
saving the hibernation image. Other devices that are not involved
in the image saving do not need to resume the device. But since there's
no api to know which case thaw() is called, device drivers can't
conditionally resume device in thaw().
The new pm_hibernate_is_recovering() is such a api to query if thaw() is
called in normal case.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250710062313.3226149-5-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
When hibernate with data center dGPUs, huge number of VRAM BOs evicted
to GTT and takes too much system memory. This will cause hibernation
fail due to insufficient memory for creating the hibernation image.
Move GTT BOs to shmem in KMD, then shmem to swap disk in kernel
hibernation code to make room for hibernation image.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-3-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
This new api is used for hibernation to move GTT BOs to shmem after
VRAM eviction. shmem will be flushed to swap disk later to reduce
the system memory usage for hibernation.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250710062313.3226149-2-guoqing.zhang@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
|
|
The new HW queue object, as an internal iommufd object, wants to reuse the
struct iommufd_access to pin some iova range in the iopt.
However, an access generally takes the refcount of an ictx. So, in such an
internal case, a deadlock could happen when the release of the ictx has to
wait for the release of the access first when releasing a hw_queue object,
which could wait for the release of the ictx that is refcounted:
ictx --releases--> hw_queue --releases--> access
^ |
|_________________releases________________v
To address this, add a set of lightweight internal APIs to unlink the ictx
and the access, i.e. no ictx refcounting by the access:
ictx --releases--> hw_queue --releases--> access
Then, there's no point in setting the access->ictx. So simply define !ictx
as an flag for an internal use and add an inline helper.
Link: https://patch.msgid.link/r/d8d84bf99cbebec56034b57b966a3d431385b90d.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a simple user_data for an input-to-output loopback test.
Link: https://patch.msgid.link/r/cae4632bb3d98a1efb3b77488fbf81814f2041c6.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The new type of vIOMMU for tegra241-cmdqv driver needs a driver-specific
user data. So, add data_len/uptr to the iommu_viommu_alloc uAPI and pass
it in via the viommu_init iommu op.
Link: https://patch.msgid.link/r/2315b0e164b355746387e960745ac9154caec124.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Acked-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The new type of vIOMMU for tegra241-cmdqv allows user space VM to use one
of its virtual command queue HW resources exclusively. This requires user
space to mmap the corresponding MMIO page from kernel space for direct HW
control.
To forward the mmap info (offset and length), iommufd should add a driver
specific data structure to the IOMMUFD_CMD_VIOMMU_ALLOC ioctl, for driver
to output the info during the vIOMMU initialization back to user space.
Similar to the existing ioctls and their IOMMU handlers, add a user_data
to viommu_init op to bridge between iommufd and drivers.
Link: https://patch.msgid.link/r/90bd5637dab7f5507c7a64d2c4826e70431e45a4.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Replace u32 to make it clear. No functional changes.
Also simplify the kdoc since the type itself is clear enough.
Link: https://patch.msgid.link/r/651c50dee8ab900f691202ef0204cd5a43fdd6a2.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The "id" is too general to get its meaning easily. Rename it explicitly to
"virt_id" and update the kdocs for readability. No functional changes.
Link: https://patch.msgid.link/r/1fac22d645e6ee555675726faf3798a68315b044.1752126748.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There are callers that read the unmapped bytes even when rc != 0. Thus, do
not forget to report it in the error path too.
Fixes: 8d40205f6093 ("iommufd: Add kAPI toward external drivers for kernel access")
Link: https://patch.msgid.link/r/e2b61303bbc008ba1a4e2d7c2a2894749b59fdac.1752126748.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary
for some DSI panel's with version 2 mipi-sequences too.
Specifically the Acer Iconia One 8 A1-840 (not to be confused with the
A1-840FHD which is different) has the following sequences:
BDB block 53 (1284 bytes) - MIPI sequence block:
Sequence block version v2
Panel 0 *
Sequence 2 - MIPI_SEQ_INIT_OTP
GPIO index 9, source 0, set 0 (0x00)
Delay: 50000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 6000 us
GPIO index 9, source 0, set 0 (0x00)
Delay: 6000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 25000 us
Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80
Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00
...
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29
Delay: 120000 us
Sequence 4 - MIPI_SEQ_DISPLAY_OFF
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28
Delay: 105000 us
Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00
Delay: 10000 us
Sequence 5 - MIPI_SEQ_ASSERT_RESET
Delay: 10000 us
GPIO index 9, source 0, set 0 (0x00)
Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert
is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what
the fixup from vlv_fixup_mipi_sequences() fixes up.
Extend it to also apply to v2 sequences, this fixes the panel not working
on the Acer Iconia One 8 A1-840.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14605
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250703143824.7121-1-hansg@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 11895f375939d60efe7ed5dddc1cffe2e79f976c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
It turns out that the fixup from vlv_fixup_mipi_sequences() is necessary
for some DSI panel's with version 2 mipi-sequences too.
Specifically the Acer Iconia One 8 A1-840 (not to be confused with the
A1-840FHD which is different) has the following sequences:
BDB block 53 (1284 bytes) - MIPI sequence block:
Sequence block version v2
Panel 0 *
Sequence 2 - MIPI_SEQ_INIT_OTP
GPIO index 9, source 0, set 0 (0x00)
Delay: 50000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 6000 us
GPIO index 9, source 0, set 0 (0x00)
Delay: 6000 us
GPIO index 9, source 0, set 1 (0x01)
Delay: 25000 us
Send DCS: Port A, VC 0, LP, Type 39, Length 5, Data ff aa 55 a5 80
Send DCS: Port A, VC 0, LP, Type 39, Length 3, Data 6f 11 00
...
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 29
Delay: 120000 us
Sequence 4 - MIPI_SEQ_DISPLAY_OFF
Send DCS: Port A, VC 0, LP, Type 05, Length 1, Data 28
Delay: 105000 us
Send DCS: Port A, VC 0, LP, Type 05, Length 2, Data 10 00
Delay: 10000 us
Sequence 5 - MIPI_SEQ_ASSERT_RESET
Delay: 10000 us
GPIO index 9, source 0, set 0 (0x00)
Notice how there is no MIPI_SEQ_DEASSERT_RESET, instead the deassert
is done at the beginning of MIPI_SEQ_INIT_OTP, which is exactly what
the fixup from vlv_fixup_mipi_sequences() fixes up.
Extend it to also apply to v2 sequences, this fixes the panel not working
on the Acer Iconia One 8 A1-840.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14605
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250703143824.7121-1-hansg@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
struct nouveau_sched contains a waitque needed to prevent
drm_sched_fini() from being called while there are still jobs pending.
Doing so so far would have caused memory leaks.
With the new memleak-free mode of operation switched on in
drm_sched_fini() by providing the callback nouveau_sched_cancel_job()
the waitque is not necessary anymore.
Remove the waitque.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-10-phasta@kernel.org
|
|
There is a new callback for always tearing the scheduler down in a
leak-free, deadlock-free manner.
Port Nouveau as its first user by providing the scheduler with a
callback that ensures the fence context gets killed in drm_sched_fini().
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-9-phasta@kernel.org
|
|
In order to implement a new DRM GPU scheduler callback in Nouveau, a
helper for obtaining a nouveau_fence from a dma_fence is necessary. Such
a helper exists already inside nouveau_fence.c, called from_fence().
Make that helper available to other C files with a more precise name.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-8-phasta@kernel.org
|
|
drm_sched_fini() can leak jobs under certain circumstances.
Warn if that happens.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-7-phasta@kernel.org
|
|
The scheduler unit tests now provide a new callback, cancel_job(). This
callback gets used by drm_sched_fini() for all still pending jobs to
cancel them.
Implement a new unit test to test this.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-6-phasta@kernel.org
|
|
The GPU Scheduler now supports a new callback, cancel_job(), which lets
the scheduler cancel all jobs which might not yet be freed when
drm_sched_fini() runs. Using this callback allows for significantly
simplifying the mock scheduler teardown code.
Implement the cancel_job() callback and adjust the code where necessary.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250710125412.128476-5-phasta@kernel.org
|
