summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-07-23drm/xe: Enable SR-IOV for ADL/ATSMMichal Wajdeczko
We were already testing those two platforms for a while on our CI, but enabling flag (has_sriov) was only available on the topic branch and only for builds with CONFIG_DRM_XE_DEBUG config. Since those two platforms are guarded by the another enabling flag (require_force_probe) and we believe our SR-IOV support for them is at sufficient level to start enjoying the feature, turn on the SR-IOV enabling flag unconditionally. Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250722182618.30811-4-michal.wajdeczko@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-23drm/xe/pf: Enable SR-IOV PF mode by defaultMichal Wajdeczko
We already claim official support for SR-IOV PF/VF modes on PTL and BMG platforms, but by default we start the Xe driver on those platforms in non-virtualized mode (native) since we still have max_vfs modparam set to disable creation of the VFs. It's time to let the Xe driver support SR-IOV PF mode by default. We were already testing this on our CI, which was relying on the patch that was enabling it for CONFIG_DRM_XE_DEBUG used by our CI. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250722182618.30811-3-michal.wajdeczko@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-23PCI: Fix typosBjorn Helgaas
Fix typos. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://patch.msgid.link/20250722213743.2822761-1-helgaas@kernel.org
2025-07-23rtc: pcf85063: add support for RV8063Antoni Pokusinski
Microcrystal RV8063 is a real-time clock with SPI interface. Its functionality is very similar to the RV8263 rtc. Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com> Link: https://lore.kernel.org/r/20250413130755.159373-4-apokusinski01@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-07-23rtc: pcf85063: create pcf85063_i2c_probeAntoni Pokusinski
Move the i2c-specific code from pcf85063_probe to the newly created function. This is a preparation for introducing the support for RV8063 real-time clock with SPI interface. Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com> Link: https://lore.kernel.org/r/20250413130755.159373-3-apokusinski01@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-07-23PCI: mvebu: Use devm_add_action_or_reset() instead of devm_add_action()Salah Triki
Replace devm_add_action() with devm_add_action_or_reset() to avoid explicitly dropping the 'port->clk' reference in error path. Signed-off-by: Salah Triki <salah.triki@gmail.com> [mani: reworded commit subject and description] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/aHsgYALHfQbrgq0t@pc
2025-07-23drm/panel-edp: Add 50ms disable delay for four panelsLangyan Ye
Add 50ms disable delay for NV116WHM-N49, NV122WUM-N41, and MNC207QS1-1 to satisfy T9+T10 timing. Add 50ms disable delay for MNE007JA1-2 as well, since MNE007JA1-2 copies the timing of MNC207QS1-1. Specifically, it should be noted that the MNE007JA1-2 panel was added by someone who did not have the panel documentation, so they simply copied the timing from the MNC207QS1-1 panel. Adding an extra 50 ms of delay should be safe. Fixes: 0547692ac146 ("drm/panel-edp: Add several generic edp panels") Fixes: 50625eab3972 ("drm/edp-panel: Add panel used by T14s Gen6 Snapdragon") Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20250723072513.2880369-1-yelangyan@huaqin.corp-partner.google.com
2025-07-23drm/xe: Fix build without debugfsLucas De Marchi
When CONFIG_DEBUG_FS is off, drivers/gpu/drm/xe/xe_gt_debugfs.o is not built and build fails on some setups with: ld: drivers/gpu/drm/xe/xe_gt.o: in function `xe_fault_inject_gt_reset': drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1659): undefined reference to `gt_reset_failure' ld: drivers/gpu/drm/xe/xe_gt.h:27:(.text+0x1c16): undefined reference to `gt_reset_failure' collect2: error: ld returned 1 exit status Do not use the gt_reset_failure attribute if debugfs is not enabled. Fixes: 8f3013e0b222 ("drm/xe: Introduce fault injection for gt reset") Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://lore.kernel.org/r/20250722-xe-fix-build-fault-v1-1-157384d50987@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-07-23Bluetooth: btintel_pcie: Fix Alive Context State HandlingKiran K
The firmware raises an alive interrupt upon sending the HCI_RESET or BTINTEL_HCI_OP_RESET command. As part of handling the reset command, firmware initializes the hardware and data path and raises the alive interrupt. Upon receiving the alive interrupt, the driver must enable the data path and grant RX buffers to the firmware before sending any commands. The alive context maintained in the driver must be updated before sending BTINTEL_HCI_OP_RESET or HCI_OP_RESET to prevent a potential race condition where the context is also updated in the threaded IRQ. The issue was observed in a stress reboot usecase (1/25) using "sudo reboot" command where the firmware download was failing as the driver was not granting RX buffer to firmware due to race condition. Bluetooth: hci0: API lock is disabled Bluetooth: hci0: Debug lock is disabled Bluetooth: hci0: Minimum firmware build 1 week 10 2014 Bluetooth: hci0: Bootloader timestamp 2023.43 buildtype 1 build 11631 Bluetooth: hci0: Found device firmware: intel/ibt-00a0-00a1-iml.sfi Bluetooth: hci0: Boot Address: 0xb0301000 Bluetooth: hci0: Firmware Version: 167-12.25 Bluetooth: hci0: Waiting for firmware download to complete Bluetooth: hci0: Firmware loaded in 99902 usecs Bluetooth: hci0: Alive context: fw_dl old_boot_stage: 0xa0db0003 new_boot_stage: 0xa0db0003 Bluetooth: hci0: sent cmd: 0xfc01 alive context changed: fw_dl -> intel_reset1 Bluetooth: hci0: Waiting for device to boot Bluetooth: hci0: Device boot timeout Bluetooth: hci0: Firmware download retry count: 1 Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Make driver wait for alive interruptKiran K
The firmware raises an alive interrupt upon receiving the HCI_RESET or BTINTEL_HCI_OP_RESET (Intel reset - 0xfc01) command. This change fixes the driver to properly wait for the alive interrupt to avoid driver sending commands to firmware before it is ready to process. For details on the handshake between the driver and firmware, refer to commit 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware"). As the driver needs to handle two interrupts for HCI_OP_RESET and BTINTEL_HCI_OP_RESET, the firmware ensures that the TX completion interrupt is always followed by the alive interrupt. Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware") Signed-off-by: Sai Teja Aluvala <aluvala.sai.teja@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855Zijun Hu
Add one more part with ID (0x28de, 0x1401) to usb_device_id table for Qualcomm WCN6855, and its device info from /sys/kernel/debug/usb/devices is shown below: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=28de ProdID=1401 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Zijun Hu <Zijun.Hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Sort WCN6855 device IDs by VID and PIDZijun Hu
Sort WCN6855 device IDs to more easily manage them. Signed-off-by: Zijun Hu <Zijun.Hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: QCA: Support downloading custom-made firmwaresZijun Hu
There are custom-made firmwares based on board ID for a given QCA BT chip sometimes, and they are different with existing firmwares and put in a separate subdirectory to avoid conflict, for example: QCA2066, as a variant of WCN6855, has firmwares under 'qca/QCA2066/' of linux-firmware repository. Support downloading custom-made firmwares based on a table newly added. Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: Add uevents for FW dump and FW download completeNeeraj Sanjay Kale
This adds uevents which will be generated whenever FW dump is triggered, FW dump is complete and FW (re)download is done. This feature is needed for IW612 chipset, which is a tri-radio chipset, where WLAN runs on CPU1 and BT and Zigbee runs on CPU2. Currently, whenever BT FW crashes, and FW dump is in progress, there is no way for 15.4 application to know that CPU2 is in bad state, and when it will be recovered. With the help of these uevents and udev rules, the 15.4 app, or any userspace application can be alerted whenever CPU2 goes in bad state and recoveres after BTNXPUART reloads the firmware. [ 334.255154] Bluetooth: hci0: ==== Start FW dump === [ 334.261003] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_DUMP_ACTIVE === [ 351.486048] Bluetooth: hci0: ==== FW dump complete === [ 351.491356] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_DUMP_DONE === [ 352.028974] Bluetooth: hci0: ChipID: 7601, Version: 0 [ 352.034490] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se [ 353.979977] Bluetooth: hci0: FW Download Complete: 417064 bytes [ 355.197222] Bluetooth: hci0: ==== Send uevent: BTNXPUART_DEV=serial0-0:BTNXPUART_STATE=FW_READY === Tested this change by creating a simple udev rule to store the BTNXPUART_STATE value in a ~/<BTNXPUART_DEV>/state file, and running 15.4 traffic. The 15.4 packets were sent over SPI only when BTNXPUART_STATE was FW_READY. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Jean-Yves Salaün <jean-yves.salaun@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dumpNeeraj Sanjay Kale
This adds proper handling for the independent reset command sent by the driver after FW dump is complete. In normal scenario, the independent reset vendor command gives a success response before jumping to bootcode. However, when FW goes in a bad state, and sends out FW dump packets, the independent reset command does not get any response from the controller. [ 159.807732] Bluetooth: hci0: ==== Start FW dump === [ 180.759060] Bluetooth: hci0: ==== FW dump complete === [ 182.779208] Bluetooth: hci0: command 0xfcfc tx timeout [ 183.364974] Bluetooth: hci0: ChipID: 7601, Version: 0 [ 183.368490] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se [ 184.679977] Bluetooth: hci0: FW Download Complete: 417064 bytes [ 187.963102] Bluetooth: hci0: Opcode 0x0c03 failed: -110 As a fix for such scenario, the independent reset vendor command is sent using the __hci_cmd_send() API, which does not expect any response for vendor commands. __hci_cmd_send is non blocking, so before the tx_work is scheduled, it sometimes gets canceled and 3F|FC command is never sent. Adding a small delay after __hci_cmd_send allows the command to be sent to the controller. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Jean-Yves Salaün <jean-yves.salaun@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel: Define a macro for Intel Reset vendor commandKiran K
Use macro for Intel Reset command (0xfc01) instead of hard coded value. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: hci_bcm4377: Fix typo in commentBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btrtl: Fix typo in commentBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btmtk: Fix typo in log stringBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel: Fix typo in commentBastien Nocera
Found by codespell. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add new VID/PID 0489/e14e for MT7925En-Wei Wu
Add VID 0489 & PID e14e for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e14e Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add RTL8852BE device 0x13d3:0x3618Hao Li
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3618 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hao Li <lihao1@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Fix potential NULL dereference on kmalloc failureZhongqiu Han
Avoid potential NULL pointer dereference by checking the return value of kmalloc and handling allocation failure properly. Fixes: 7d70989fcea7 ("Bluetooth: btusb: Add HCI Drv commands for configuring altsetting") Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: implement powerup sequenceCatalin Popescu
NXP bluetooth chip shares power supply and reset gpio with a WLAN chip. Add support for power supply and reset and enforce powerup sequence: - apply power supply - deassert reset/powerdown Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com> Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btnxpuart: Add support for 4M baudrateNeeraj Sanjay Kale
This adds support for 4000000 as secondary baudrate. This value is selected from device tree property "max-speed" which is then used to download FW chunks, and as operational baudrate after HCI initialization is done. Earlier, the secondary baudrate was fixed to 3000000 in driver, but now with "max-speed" property, this secondary baudrate can be set to 4000000. The secondary baudrate is set by the driver by sending a vendor command (3F 09) to the firmware, with secondary baudrate parameter, in nxp_post_init(). Any other value set for max-speed other than 3000000 or 4000000 will default to 3000000, which is supported by all legacy and new NXP chipsets. This feature is applicable for all new V3 bootloader chips and w8987 V1 bootloader chip. This property does not apply for w8997 compatible device, since it downloads a helper.bin FW file that sets secondary baudrate as 3000000 only. The switch to 4000000 baudrate is validated using a Saleae Logic Analyzer and imx8m-mini with AW693 M.2 module. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: hci_qca: Enable ISO data packet RXZijun Hu
Enable ISO data packet RX for LE audio. Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Add support for device 0x4d76Kiran K
lspci -v -k -d 8086:4d76 00:14.7 Bluetooth: Intel Corporation Device 4d76 Subsystem: Intel Corporation Device 0011 Flags: fast devsel, IRQ 255, IOMMU group 12 Memory at 13013328000 (64-bit, non-prefetchable) [disabled] [size=16K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [80] MSI-X: Enable- Count=32 Masked- Capabilities: [100] Latency Tolerance Reporting Kernel driver in use: btintel_pcie Kernel modules: btintel_pcie Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add a new VID/PID 2c7c/7009 for MT7925Haochen Tong
Adds a new entry with VID 2c7c and PID 7009 for MediaTek MT7925 Bluetooth chip. The device information from /sys/kernel/debug/usb/devices is provided below. T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=7009 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Haochen Tong <i@hexchain.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Reword restart to recoveryLuiz Augusto von Dentz
This rewords the term restart with recovery since the intend is for hardware recovery not a regular restart, also remove some debug logs which might just clutter the output informing the recovery counter which isn't really useful for regular users. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btintel_pcie: Support Function level resetChandrashekar Devegowda
The driver supports Function Level Reset (FLR) to recover the controller upon hardware exceptions or hci command timeouts. FLR is triggered only when no prior reset has occurred within the retry window, with a maximum of one FLR allowed within this window. This patch is tested by, echo 1 > /sys/class/bluetooth/hciX/reset Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23drm/xe/vf: Register CCS read/write contexts with GucSatyanarayana K V P
Register read write contexts with newly added flags with GUC and enable the context immediately after registration. Re-register the context with Guc when resuming from runtime suspend as soft reset is applied to Guc during xe_pm_runtime_resume(). Make Ring head=tail while unbinding device to avoid issues with VF pause after device is unbinded. Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250722120506.6483-4-satyanarayana.k.v.p@intel.com
2025-07-23drm/xe/vf: Attach and detach CCS copy commands with BOSatyanarayana K V P
Attach CCS read/write copy commands to BO for old and new mem types as NULL -> tt or system -> tt. Detach the CCS read/write copy commands from BO while deleting ttm bo from xe_ttm_bo_delete_mem_notify(). Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250722120506.6483-3-satyanarayana.k.v.p@intel.com
2025-07-23drm/xe/vf: Create contexts for CCS read writeSatyanarayana K V P
Create two LRCs to handle CCS meta data read / write from CCS pool in the VM. Read context is used to hold GPU instructions to be executed at save time and write context is used to hold GPU instructions to be executed at the restore time. Allocate batch buffer pool using suballocator for both read and write contexts. Migration framework is reused to create LRCAs for read and write. Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250722120506.6483-2-satyanarayana.k.v.p@intel.com
2025-07-23Bluetooth: btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)Uwe Kleine-König
Teach the btusb driver to recognize another variant of the RTL8851BE bluetooth radio. /sys/kernel/debug/usb/devices reports for that device: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3601 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Reported-by: shdeb <shdeb3000000@gmail.com> Link: https://bugs.debian.org/1106386 Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23Bluetooth: btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB NanoZenm Chen
Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano which is based on a Realtek RTL8851BU chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=3625 ProdID=010b Rev= 0.00 S: Manufacturer=Realtek S: Product=802.11ax WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8851bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Zenm Chen <zenmchen@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-23drm/display: bridge-connector: correct CEC bridge pointers in ↵Dmitry Baryshkov
drm_bridge_connector_init The bridge used in drm_bridge_connector_init() for CEC init does not correctly point to the required HDMI CEC bridge, which can lead to errors during CEC initialization. Fixes: 65a2575a68e4 ("drm/display: bridge-connector: hook in CEC notifier support") Fixes: a74288c8ded7 ("drm/display: bridge-connector: handle CEC adapters") Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Closes: http://lore.kernel.org/r/20250718164156.194702d9@booty/ Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Link: https://lore.kernel.org/r/20250719-fix-cec-bridges-v1-1-a60b1333c87d@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
2025-07-23drm/i915/display: Fix dma_fence_wait_timeout() return value handlingAakash Deep Sarkar
dma_fence_wait_timeout returns a long type but the driver is only using the lower 32 bits of the retval and discarding the upper 32 bits. This is particularly problematic if there are already signalled or stub fences on some of the hw planes. In this case the dma_fence_wait_timeout function will immediately return with timeout value MAX_SCHEDULE_TIMEOUT (0x7fffffffffffffff) since the fence is already signalled. If the driver only uses the lower 32 bits of this return value then it'll interpret it as an error code (0xFFFFFFFF or (-1)) and skip the wait on the remaining fences. This issue was first observed in the xe driver with the Android compositor where the GPU composited layer was not properly waited on when there were stub fences in other overlay planes resulting in visual artifacts. Fixes: d59cf7bb73f3c ("drm/i915/display: Use dma_fence interfaces instead of i915_sw_fence") Signed-off-by: Aakash Deep Sarkar <aakash.deep.sarkar@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://lore.kernel.org/r/20250708074540.1948068-1-aakash.deep.sarkar@intel.com (cherry picked from commit cdb16039515a5ac4d2c923f7a651cf19a803a3fe) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-07-23drm/xe/vf: Don't register I2C devices if VFLukasz Laguna
VF drivers can't access I2C devices, so skip their registration when running as VF. Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com> Fixes: f0e53aadd702 ("drm/xe: Support for I2C attached MCUs") Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250717155420.25298-1-lukasz.laguna@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2025-07-23dmaengine: xdmac: make it selectable for ARCH_MICROCHIPRobert Marko
LAN969x uses the Atmel XDMAC, so make it selectable for ARCH_MICROCHIP to avoid needing to update depends in future if other Microchip SoC-s use it as well. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20250702183856.1727275-9-robert.marko@sartura.hr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-23dmaengine: nbpfaxi: Add missing check after DMA mapThomas Fourier
The DMA map functions can fail and should be tested for errors. If the mapping fails, unmap and return an error. Fixes: b45b262cefd5 ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250707075752.28674-2-fourier.thomas@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-23dmaengine: mv_xor: Fix missing check after DMA map and missing unmapThomas Fourier
The DMA map functions can fail and should be tested for errors. In case of error, unmap the already mapped regions. Fixes: 22843545b200 ("dma: mv_xor: Add support for DMA_INTERRUPT") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250701123753.46935-2-fourier.thomas@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2025-07-23Merge tag 'iwlwifi-next-2025-07-23' of ↵Johannes Berg
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Miri Korenblit says: ==================== iwlwifi feature, notably - disable features in fips - remove RX OMI feature code - A few fixes and cleanups ==================== Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcmsmac: Use str_true_false() helperLiu Song
Remove hard-coded strings by using the str_true_false() helper function. Signed-off-by: Liu Song <liu.song13@zte.com.cn> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250723173004776P6QSjcW7NrlpGYLTFM-yP@zte.com.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failureTing-Ying Li
For WPA3-SAE Connection in EXTSAE mode, the userspace daemon is allowed to generate the SAE Auth frames. The driver uses the "mgmt_frame" FW IOVAR to transmit this MGMT frame. Before sending the IOVAR, the Driver is incorrectly treating the channel number read from the FW as a frequency value and again attempts to convert this into a channel number using ieee80211_frequency_to_channel(). This added an invalid channel number as part of the IOVAR request to the FW And some FW which strictly expects a valid channel would return BAD_CHAN error, while failing to transmit the driver requested SAE Auth MGMT frame. Fix this in the CYW vendor specific MGMT TX cfg80211 ops handler, by not treating the channel number read from the FW as frequency value and skip the attempt to convert it again into a channel number. Also fix this in the generic MGMT TX cfg80211 ops handler. Fixes: c2ff8cad6423 ("brcm80211: make mgmt_tx in brcmfmac accept a NULL channel") Fixes: 66f909308a7c ("wifi: brcmfmac: cyw: support external SAE authentication in station mode") Signed-off-by: Ting-Ying Li <tingying.li@cypress.com> Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250723105918.5229-1-gokulkumar.sivakumar@infineon.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcm80211: Remove yet more unused functionsDr. David Alan Gilbert
This is a subset of unused functions in bcrmsmac phy_cmn.c, They're unused since the original 2010 commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250626140812.56700-4-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcm80211: Remove more unused functionsDr. David Alan Gilbert
This is a subset of unused functions in bcrmsmac phy_cmn.c, They're unused since the original 2010 commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250626140812.56700-3-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23wifi: brcm80211: Remove unused functionsDr. David Alan Gilbert
This is a subset of unused functions in bcrmsmac phy_cmn.c, They're unused since the original 2010 commit a9533e7ea3c4 ("Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.") Remove them. Then remove two more functions in phy_n.c that were only used by the ones just removed. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>> Link: https://patch.msgid.link/20250626140812.56700-2-linux@treblig.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-07-23spi: spi-qpic-snand: simplify bad block marker duplicationGabor Juhos
Due to the expectations of the SPINAND code, the driver duplicates the bad block markers during raw OOB reads. It has been implemented by using two if statements, and due to the opposite conditions one of conditional codepaths always runs. Since the effect of both codepaths is the same, remove the if statements and use a single line solution instead. Also add a note about why the duplication is required. No functional changes intended. Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://patch.msgid.link/20250711-qpic-snand-simplify-bbm-copy-v1-1-dd2608325f72@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-23spi: spi-qpic-snand: don't hardcode ECC stepsGabor Juhos
NAND devices with different page sizes requires different number of ECC steps, yet the qcom_spi_ecc_init_ctx_pipelined() function sets 4 steps in 'ecc_cfg' unconditionally. The correct number of the steps is calculated earlier in the function already, so use that instead of the hardcoded value. Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://patch.msgid.link/20250723-qpic-snand-fix-steps-v1-1-d800695dde4c@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-23iommu/vt-d: Fix UAF on sva unbind with pending IOPFsLu Baolu
Commit 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path") disables IOPF on device by removing the device from its IOMMU's IOPF queue when the last IOPF-capable domain is detached from the device. Unfortunately, it did this in a wrong place where there are still pending IOPFs. As a result, a use-after-free error is potentially triggered and eventually a kernel panic with a kernel trace similar to the following: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 313 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0 Workqueue: iopf_queue/dmar0-iopfq iommu_sva_handle_iopf Call Trace: <TASK> iopf_free_group+0xe/0x20 process_one_work+0x197/0x3d0 worker_thread+0x23a/0x350 ? rescuer_thread+0x4a0/0x4a0 kthread+0xf8/0x230 ? finish_task_switch.isra.0+0x81/0x260 ? kthreads_online_cpu+0x110/0x110 ? kthreads_online_cpu+0x110/0x110 ret_from_fork+0x13b/0x170 ? kthreads_online_cpu+0x110/0x110 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- The intel_pasid_tear_down_entry() function is responsible for blocking hardware from generating new page faults and flushing all in-flight ones. Therefore, moving iopf_for_domain_remove() after this function should resolve this. Fixes: 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach path") Reported-by: Ethan Milon <ethan.milon@eviden.com> Closes: https://lore.kernel.org/r/e8b37f3e-8539-40d4-8993-43a1f3ffe5aa@eviden.com Suggested-by: Ethan Milon <ethan.milon@eviden.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20250723072045.1853328-1-baolu.lu@linux.intel.com Signed-off-by: Will Deacon <will@kernel.org>
generated by cgit v1.3 (git 2.53.0) at 2026-11-10 23:14:58 +0000