| Age | Commit message (Collapse) | Author |
|---|
|
upages is assigned under cpages = 0, so it isn't really used in this function.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Philip.Yang<Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Certain messages will processed with high priority by PMFW even if it
hasn't responded to a previous message. Send the priority message
regardless of the success/fail status of the previous message. Add
support on SMUv13.0.6 and SMUv13.0.12
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the dpc status based on hardware state. Also, clear the status before
reinitialization after a successful reset.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some PSPv11 SOCs take a longer time for PSP based mode-1 reset. Instead
of checking for C2PMSG_33 status, add the callback wait_for_bootloader.
Wait for bootloader to be back to steady state is already part of the
generic mode-1 reset flow. Increase the retry count for bootloader wait
and also fix the mask to prevent fake pass.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The repeated checks on grbm_soft_reset are unnecessary. Remove them.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The repeated checks on grbm_soft_reset are unnecessary. Remove them.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The repeated checks on grbm_soft_reset are unnecessary. Remove them.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With a timeout of only 1 second, my rx 5700XT fails to initialize,
so this increases the timeout to 2s.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3697
Signed-off-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a spelling mistake in the author's email address. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
No functional modification involved.
./drivers/mailbox/bcm74110-mailbox.c:483:2-3: Unneeded semicolon.
./drivers/mailbox/bcm74110-mailbox.c:563:2-3: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22936
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add mailbox controller driver for AST27XX SoCs, which provides
independent tx/rx mailbox between different processors. There are 4
channels for each tx/rx mailbox and each channel has an 32-byte FIFO.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The bcm74110 mailbox driver is used to communicate with
a co-processor for various power management and firmware
related tasks.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
__pm_runtime_put_autosuspend() was meant to be used by callers that needed
to put the Runtime PM usage_count without marking the device's last busy
timestamp. It was however seen that the Runtime PM autosuspend related
functions should include that call. Thus switch the driver to
use pm_runtime_put_autosuspend().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The suspend and resume callbacks for pm and runtime pm should be same.
During suspending, it needs to stop all hardware contexts first. And
the hardware contexts will be restarted after the device is resumed.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250803191450.1568851-1-lizhi.hou@amd.com
|
|
Prepare input updates for 6.17 merge window.
|
|
Make use of the newly defined BTN_GRIP* codes instead of using
BTN_TRIGGER_HAPPY* and other less suited button codes.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20250717000143.1902875-4-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
0-day reported an off by one in the ioremap() sizing:
drivers/irqchip/irq-mvebu-gicp.c:240:45-48: WARNING:
Suspicious code. resource_size is maybe missing with gicp -> res
Convert it to resource_size(), which does the right thing.
Fixes: 3c3d7dbab2c7 ("irqchip/mvebu-gicp: Clear pending interrupts on init")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202508062150.mtFQMTXc-lkp@intel.com/
|
|
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
|
|
The function spi_mem_adjust_op_freq() within spi_mem_exec_op() adjusts
the op->max_freq, which will informs the SPI controller of the maximum
frequency for each operation. This adjustment is based on combined
information from the SPI device and the board's wiring conditions.
Similarly, spi_mem_supports_op() will check the capabilities of the SPI
controller. It also requires the combined information before it can
accurately determine whether the SPI controller supports a given operation.
Signed-off-by: Tianyu Xu <tianyxu@cisco.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250805015403.43928-1-tianyxu@cisco.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
drm_helper_mode_fill_fb_struct()
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
The patch is based on the driver parts of the patchset at Link:
below, which missed converting the radeon driver.
Due to the absence of this change in the patchset at Link:, after the
Fixed: commit below, radeon_framebuffer_init() ->
drm_helper_mode_fill_fb_struct() set drm_framebuffer::format incorrectly
to NULL, which lead to the !fb->format WARN() in drm_framebuffer_init()
and causing framebuffer creation to fail. This patch fixes both of these
issues.
v2: Amend the commit log mentioning the functional issues the patch
fixes. (Tomi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: 41ab92d35ccd ("drm: Make passing of format info to drm_helper_mode_fill_fb_struct() mandatory")
Link: https://lore.kernel.org/all/20250701090722.13645-1-ville.syrjala@linux.intel.com
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250805175752.690504-4-imre.deak@intel.com
|
|
drm_helper_mode_fill_fb_struct()
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
The patch is based on the driver parts of the patchset at Link:
below, which missed converting the nouveau driver.
Due to the absence of this change in the patchset at Link:, after the
Fixed: commit below, nouveau_framebuffer_new() ->
drm_helper_mode_fill_fb_struct() set drm_framebuffer::format incorrectly
to NULL, which lead to the !fb->format WARN() in drm_framebuffer_init()
and causing framebuffer creation to fail. This patch fixes both of these
issues.
v2: Amend the commit log mentioning the functional issues the patch
fixes. (Tomi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: nouveau@lists.freedesktop.org
Fixes: 41ab92d35ccd ("drm: Make passing of format info to drm_helper_mode_fill_fb_struct() mandatory")
Link: https://lore.kernel.org/all/20250701090722.13645-1-ville.syrjala@linux.intel.com
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: James Jones <jajones@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: James Jones <jajones@nvidia.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250805175752.690504-3-imre.deak@intel.com
|
|
drm_helper_mode_fill_fb_struct()
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
The patch is based on the driver parts of the patchset at Link:
below, which missed converting the omap driver.
Due to the absence of this change in the patchset at Link:, after the
Fixed: commit below, omap_framebuffer_init() ->
drm_helper_mode_fill_fb_struct() set drm_framebuffer::format incorrectly
to NULL, which lead to the !fb->format WARN() in drm_framebuffer_init()
and causing framebuffer creation to fail. This patch fixes both of these
issues.
v2: Amend the commit log mentioning the functional issues the patch
fixes. (Tomi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Fixes: 41ab92d35ccd ("drm: Make passing of format info to drm_helper_mode_fill_fb_struct() mandatory")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/98b3a62c-91ff-4f91-a58b-e1265f84180b@sirena.org.uk
Link: https://lore.kernel.org/all/20250701090722.13645-1-ville.syrjala@linux.intel.com
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250805175752.690504-2-imre.deak@intel.com
|
|
The DMA mapping can now correspond to a folio (order > 0), so move
the iterator by the number of pages in the folio in order to migrate
all pages at once.
This requires forcing contiguous memory for SVM BOs, which greatly
simplifies the code and enables 2MB device page support, allowing a
major performance improvement. Negative effects like extra eviction
are unlikely as SVM BOs have a maximal size of 2MB.
v2:
- Improve commit message (Matthew Brost)
- Fix increment, chunk, assert match (Matthew Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-7-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
Workaround to ensure all addresses are populated in the array as
this is expected when creating the copy batch. This is required
because the migrate layer does not support 2MB GPU pages yet. A
proper fix will come in a follow-up.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-6-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
If the order is greater than zero, allocate a folio when populating the
RAM PFNs instead of allocating individual pages one after the other. For
example if 2MB folios are used instead of 4KB pages, this reduces the
number of calls to the allocation API by 512.
v2:
- Use page order instead of extra argument (Matthew Brost)
- Allocate with folio_alloc() (Matthew Brost)
- Loop for mpages and free_pages based on order (Matthew Brost)
v3:
- Fix loops in drm_pagemap_migrate_populate_ram_pfn() (Matthew Brost)
v4:
- Use folio_trylock(), set local variable to NULL (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-5-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
If the page is part of a folio, DMA map the whole folio at once instead of
mapping individual pages one after the other. For example if 2MB folios
are used instead of 4KB pages, this reduces the number of DMA mappings by
512.
The folio order (and consequently, the size) is persisted in the struct
drm_pagemap_device_addr to be available at the time of unmapping.
v2:
- Initialize order variable (Matthew Brost)
- Set proto and dir for completeness (Matthew Brost)
- Do not populate drm_pagemap_addr, document it (Matthew Brost)
- Add and use macro NR_PAGES(order) (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-4-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
This struct embeds more information than just the DMA address. This will
help later to support folio orders greater than zero. At this point, there
is no functional change as the only struct member used is addr.
In Xe, adapt to the new drm_gpusvm_devmem_ops type signatures using struct
drm_pagemap_addr, as well as the internal xe SVM functions implementing
those operations. The use of this struct is propagated to xe_migrate as it
makes indexed accesses to the next DMA address but they are no longer
contiguous.
v2:
- Rename drm_pagemap_device_addr to drm_pagemap_addr (Matthew Brost)
- Squash with patch for Xe (Matthew Brost)
- Set proto and dir for completeness (Matthew Brost)
- Assess DMA map protocol (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-3-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
Rename this struct to the more generic name drm_pagemap_addr so it can be
used in a broader context, such as DMA mappings of CPU memory.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20250805140028.599361-2-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
|
|
Adhere to prevalent style.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/2c74fa7f2b7d5ecf8247aa5bff05d104ad60cf9e.1753953530.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
With struct __intel_global_objs_state only being accessed in
intel_global_state.c, we can make it opaque. The double underscore to
indicate internal becomes redundant, drop it.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/06cc4d1c506e3a5b1cc50e01c4bd1135bbf0f7bd.1753953530.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
for_each_{new,old,oldnew}_global_obj_in_state() are only used within
intel_global_state.c, hide them there. intel_for_each_global_obj() is
unused, remove it.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/a23212d9298423d8971d6ad62f961386f7f927cc.1753953530.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a
build failure:
drivers/gpio/gpio-sprd.c:8:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
drivers/iommu/iommufd/viommu.c:4:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
Tighten the dependency further to only allow compile testing on Arm.
This could be refined further to allow certain x86 configs.
This was submitted before to address a different build failure, which was
fixed differently, but the problem has now returned in a different form.
Fixes: 70afdab904d2d1e6 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805160952.4006075-1-arnd@kernel.org
Link: https://lore.kernel.org/all/20221215164109.761427-1-arnd@kernel.org/
|
|
Waveshare touchscreen consists of a DPI panel and a driver board.
The waveshare driver board consists of ICN6211 and a MCU to
convert DSI to DPI and control the backlight.
This driver treats the MCU and ICN6211 board as a whole unit.
It can support all resolution waveshare DSI2DPI based panel,
the timing table should come from 'panel-dpi' panel in the device tree.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Suggested-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250806-waveshare-v3-3-fd28e01f064f@nxp.com
|
|
This introduces and uses a variable id which is just uninitialized.
What really needs to be used is the scaler_id.
Fixes: 73309ed9d598 ("drm/i915/display: WA_14011503117")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://lore.kernel.org/r/20250806030856.3514127-1-suraj.kandpal@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Cleanup whitespace in messages in libata-core and the pata_pdc2027x,
pata_macio drivers (Colin)
- Fix ata_to_sense_error() to avoid seeing nonsensical sense data for
rare cases where we fail to get sense data from the drive. The
complementary fix to this is to ensure that we always return the
generic "ABORTED COMMAND" sense data for a failed command for which
we have no status or error fields
- The recent changes to link power management (LPM) which now prevent
the user from attempting to set an LPM policy through the
link_power_management_policy caused some regressions in test
environments because of the error that is now returned when writing
to that attribute when LPM is not supported. To allow users to not
trip on this, introduce the new link_power_management_supported
attribute to allow simple testing of a port/device LPM support (me)
* tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_pdc2027x: Remove space before newline and abbreviations
ata: pata_macio: Remove space before newline
ata: libata-core: Remove space before newline
ata: libata-sata: Add link_power_management_supported sysfs attribute
ata: libata-scsi: Return aborted command when missing sense and result TF
ata: libata-scsi: Fix ata_to_sense_error() status handling
|
|
When devm_add_action_or_reset() fails, it is due to a failed memory
allocation and will thus return -ENOMEM. dev_err_probe() doesn't do
anything when error is -ENOMEM. Therefore, remove the useless call to
dev_err_probe() when devm_add_action_or_reset() fails, and just return
the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://lore.kernel.org/r/pndtt2mkt8v.a.out@axis.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Address a potential out-of-bounds access issue when accessing
'host->mcq_intr_info[q_index]'. The value of 'q_index' might exceed the
valid array bounds if 'q_index == nr'. Correct condition to 'q_index >=
nr' to prevent accessing invalid memory.
Fixes: 66e26a4b8a77 ("scsi: ufs: host: mediatek: Set IRQ affinity policy for MCQ mode")
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20250804060249.1387057-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the redundant assignment if kzalloc() succeeds to avoid memory
leak.
Fixes: bd2cdd5e400f ("scsi: lpfc: NVME Initiator: Add debugfs support")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://lore.kernel.org/r/20250801185202.42631-1-jiashengjiangcool@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}()
returns an error pointer before calling dev_pm_opp_put(). This causes
a crash when OPP tables are not present in device tree.
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 000000000000002e
...
pc : dev_pm_opp_put+0x1c/0x4c
lr : core_clks_enable+0x4c/0x16c [venus_core]
Add IS_ERR() checks before calling dev_pm_opp_put() to avoid
dereferencing error pointers.
Fixes: b179234b5e59 ("media: venus: pm_helpers: use opp-table for the frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Function scsi_host_remove() doesn't exist, the actual function name is
scsi_remove_host().
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20250731133311.52034cc4@endymion
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced a regression where the UFS
interrupt status register (IS) was not cleared in ufshcd_intr() when
operating in MCQ mode. As a result, the IS register remained uncleared.
This led to a persistent issue during UIC interrupts:
ufshcd_is_auto_hibern8_error() consistently returned true because the
UFSHCD_UIC_HIBERN8_MASK bit was set, while the active command was neither
UIC_CMD_DME_HIBER_ENTER nor UIC_CMD_DME_HIBER_EXIT. This caused
continuous auto hibern8 enter errors and device failed to boot.
To fix this, ensure that the interrupt status register is properly
cleared in the ufshcd_intr() function for both MCQ mode with ESI enabled.
[ 4.553226] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: Auto
Hibern8 Enter failed - status: 0x00000040, upmcrs: 0x00000001
[ 4.553229] ufshcd-qcom 1d84000.ufs: ufshcd_check_errors: saved_err
0x40 saved_uic_err 0x0
[ 4.553311] host_regs: 00000000: d5c7033f 20e0071f 00000400 00000000
[ 4.553312] host_regs: 00000010: 01000000 00010217 00000c96 00000000
[ 4.553314] host_regs: 00000020: 00000440 00170ef5 00000000 00000000
[ 4.553316] host_regs: 00000030: 0000010f 00000001 00000000 00000000
[ 4.553317] host_regs: 00000040: 00000000 00000000 00000000 00000000
[ 4.553319] host_regs: 00000050: fffdf000 0000000f 00000000 00000000
[ 4.553320] host_regs: 00000060: 00000001 80000000 00000000 00000000
[ 4.553322] host_regs: 00000070: fffde000 0000000f 00000000 00000000
[ 4.553323] host_regs: 00000080: 00000001 00000000 00000000 00000000
[ 4.553325] host_regs: 00000090: 00000002 d0020000 00000000 01930200
Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Co-developed-by: Palash Kambar <quic_pkambar@quicinc.com>
Signed-off-by: Palash Kambar <quic_pkambar@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250728225711.29273-1-quic_nitirawa@quicinc.com
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
Cc: stable@vger.kernel.org
Cc: Armando Budianto <sprite@gnuweeb.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjqL4uF0MG_c8+xHX1Vv8==sPYQrtzbdA3kzi96284nuQ@mail.gmail.com
Closes: https://lore.kernel.org/netdev/CAHk-=wjKh8X4PT_mU1kD4GQrbjivMfPn-_hXa6han_BTDcXddw@mail.gmail.com
Closes: https://lore.kernel.org/netdev/0752dee6-43d6-4e1f-81d2-4248142cccd2@gnuweeb.org
Fixes: 0d9cfc9b8cb1 ("net: usbnet: Avoid potential RCU stall on LINK_CHANGE event")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
emac_rx_packet() is a common function for handling traffic
for both xdp and non-xdp use cases. Use common logic for
handling skb with or without xdp to prevent any incorrect
packet processing. This patch fixes ping working with
XDP_PASS for icssg driver.
Fixes: 62aa3246f4623 ("net: ti: icssg-prueth: Add XDP support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250803180216.3569139-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap copying of drop stats on TX path from fbd->hw_stats by the
hw_stats_lock. Currently, it is being performed outside the lock and
another thread accessing fbd->hw_stats can lead to inconsistencies.
Fixes: 5f8bd2ce8269 ("eth: fbnic: add support for TMI stats")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250802024636.679317-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correctly copy the tx_dropped stats from the fbd->hw_stats to the
rtnl_link_stats64 struct.
Fixes: 5f8bd2ce8269 ("eth: fbnic: add support for TMI stats")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250802024636.679317-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alex added page bias of LONG_MAX, which is admittedly quite
a clever way of catching overflows of the pp ref count.
The page pool code was "optimized" to leave the ref at 1
for freed pages so it can't catch basic bugs by itself any more.
(Something we should probably address under DEBUG_NET...)
Unfortunately for fbnic since commit f7dc3248dcfb ("skbuff: Optimization
of SKB coalescing for page pool") core _may_ actually take two extra
pp refcounts, if one of them is returned before driver gives up the bias
the ret < 0 check in page_pool_unref_netmem() will trigger.
While at it add a FBNIC_ to the name of the driver constant.
Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Link: https://patch.msgid.link/20250801170754.2439577-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A large DMA mapping request can loop through dma address pinning for
many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can
be costly, so let the task reschedule as need to prevent CPU stalls. Failure to
do so has potential harmful side effects, like increased memory pressure
as unrelated rcu tasks are unable to make their reclaim callbacks and
result in OOM conditions.
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 36-....: (20999 ticks this GP) idle=b01c/1/0x4000000000000000 softirq=35839/35839 fqs=3538
rcu: hardirqs softirqs csw/system
rcu: number: 0 107 0
rcu: cputime: 50 0 10446 ==> 10556(ms)
rcu: (t=21075 jiffies g=377761 q=204059 ncpus=384)
...
<TASK>
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? walk_system_ram_range+0x63/0x120
? walk_system_ram_range+0x46/0x120
? pgprot_writethrough+0x20/0x20
lookup_memtype+0x67/0xf0
track_pfn_insert+0x20/0x40
vmf_insert_pfn_prot+0x88/0x140
vfio_pci_mmap_huge_fault+0xf9/0x1b0 [vfio_pci_core]
__do_fault+0x28/0x1b0
handle_mm_fault+0xef1/0x2560
fixup_user_fault+0xf5/0x270
vaddr_get_pfns+0x169/0x2f0 [vfio_iommu_type1]
vfio_pin_pages_remote+0x162/0x8e0 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0x1121/0x1810 [vfio_iommu_type1]
? futex_wake+0x1c1/0x260
x64_sys_call+0x234/0x17a0
do_syscall_64+0x63/0x130
? exc_page_fault+0x63/0x130
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20250715184622.3561598-1-kbusch@meta.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
