| Age | Commit message (Collapse) | Author |
|---|
|
Previously, it was possible for a PCI device to be runtime-suspended before
it was fully initialized. When that happened, the suspend process could
save invalid device state, for example, before BAR assignment. Restoring
the invalid state during resume may leave the device non-functional.
Prevent runtime suspend for PCI devices until they are fully initialized by
deferring pm_runtime_enable().
More details on how exactly this may occur:
1. PCI device is created by pci_scan_slot() or similar
2. As part of pci_scan_slot(), pci_pm_init() puts the device in D0 and
prevents runtime suspend prevented via pm_runtime_forbid()
3. pci_device_add() adds the underlying 'struct device' via device_add(),
which means user space can allow runtime suspend, e.g.,
echo auto > /sys/bus/pci/devices/.../power/control
4. PCI device receives BAR configuration
(pci_assign_unassigned_bus_resources(), etc.)
5. pci_bus_add_device() applies final fixups, saves device state, and
tries to attach a driver
The device may potentially be suspended between #3 and #5, so this is racy
with user space (udev or similar).
Many PCI devices are enumerated at subsys_initcall time and so will not
race with user space, but devices created later by hotplug or modular
pwrctrl or host controller drivers are susceptible to this race.
More runtime PM details at the first Link: below.
Link: https://lore.kernel.org/all/0e35a4e1-894a-47c1-9528-fc5ffbafd9e2@samsung.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
[bhelgaas: update comments per https://lore.kernel.org/r/CAJZ5v0iBNOmMtqfqEbrYyuK2u+2J2+zZ-iQd1FvyCPjdvU2TJg@mail.gmail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260122094815.v5.1.I60a53c170a8596661883bd2b4ef475155c7aa72b@changeid
|
|
hci_uart_set_proto() sets HCI_UART_PROTO_INIT before calling
hci_uart_register_dev(), which calls proto->open() to initialize
hu->priv. However, if a TTY write wakeup occurs during this window,
hci_uart_tx_wakeup() may schedule write_work before hu->priv is
initialized, leading to a NULL pointer dereference in
hci_uart_write_work() when proto->dequeue() accesses hu->priv.
The race condition is:
CPU0 CPU1
---- ----
hci_uart_set_proto()
set_bit(HCI_UART_PROTO_INIT)
hci_uart_register_dev()
tty write wakeup
hci_uart_tty_wakeup()
hci_uart_tx_wakeup()
schedule_work(&hu->write_work)
proto->open(hu)
// initializes hu->priv
hci_uart_write_work()
hci_uart_dequeue()
proto->dequeue(hu)
// accesses hu->priv (NULL!)
Fix this by moving set_bit(HCI_UART_PROTO_INIT) after proto->open()
succeeds, ensuring hu->priv is initialized before any work can be
scheduled.
Fixes: 5df5dafc171b ("Bluetooth: hci_uart: Fix another race during initialization")
Link: https://lore.kernel.org/linux-bluetooth/6969764f.170a0220.2b9fc4.35a7@mx.google.com/
Signed-off-by: Jia-Hong Su <s11242586@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue"
* tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
Octeontx2-af: Add proper checks for fwdata
dpll: Prevent duplicate registrations
net/sched: act_ife: avoid possible NULL deref
hinic3: Fix netif_queue_set_napi queue_index input parameter error
vsock/test: add stream TX credit bounds test
vsock/virtio: cap TX credit to local buffer size
vsock/test: fix seqpacket message bounds test
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
net: fec: account for VLAN header in frame length calculations
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
octeontx2-af: Fix error handling
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
rxrpc: Fix data-race warning and potential load/store tearing
net: dsa: fix off-by-one in maximum bridge ID determination
net: bcmasp: Fix network filter wake for asp-3.0
bonding: provide a net pointer to __skb_flow_dissect()
selftests: net: amt: wait longer for connection before sending packets
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning"
netrom: fix double-free in nr_route_frame()
...
|
|
HK_TYPE_DOMAIN will soon integrate cpuset isolated partitions and
therefore be made modifiable at runtime. Synchronize against the cpumask
update using RCU.
The RCU locked section includes both the housekeeping CPU target
election for the PCI probe work and the work enqueue.
This way the housekeeping update side will simply need to flush the
pending related works after updating the housekeeping mask in order to
make sure that no PCI work ever executes on an isolated CPU. This part
will be handled in a subsequent patch.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED fix from Lee Jones:
- Fix race condition leading to null pointer dereference on ThinkPad
* tag 'leds-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: led-class: Only Add LED to leds_list when it is fully ready
|
|
This reverts commit bc6d54ac7e7436721a19443265f971f890c13cc5.
The workload profile needs to be in the default state when
the dc idle optimizaion state is entered. However, when
jobs come in for video or GFX or compute, the profile may
be set to a non-default profile resulting in the dc idle
optimizations not taking affect and resulting in higher
power usage. As such we need to pause the workload profile
changes during this transition. When this patch was originally
committed, it caused a regression with a Dell U3224KB display,
but no other problems were reported at the time. When it
was reapplied (this patch) to address increased power usage, it
seems to have caused additional regressions. This change seems
to have a number of side affects (audio issues, stuttering,
etc.). I suspect the pause should only happen when all displays
are off or in static screen mode, but I think this call site
gets called more often than that which results in idle state
entry more often than intended. For now revert.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4894
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4717
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4725
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4517
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4806
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1412482b714358ffa30d38fd3dd0b05795163648)
|
|
This reverts commit bc6d54ac7e7436721a19443265f971f890c13cc5.
The workload profile needs to be in the default state when
the dc idle optimizaion state is entered. However, when
jobs come in for video or GFX or compute, the profile may
be set to a non-default profile resulting in the dc idle
optimizations not taking affect and resulting in higher
power usage. As such we need to pause the workload profile
changes during this transition. When this patch was originally
committed, it caused a regression with a Dell U3224KB display,
but no other problems were reported at the time. When it
was reapplied (this patch) to address increased power usage, it
seems to have caused additional regressions. This change seems
to have a number of side affects (audio issues, stuttering,
etc.). I suspect the pause should only happen when all displays
are off or in static screen mode, but I think this call site
gets called more often than that which results in idle state
entry more often than intended. For now revert.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4894
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4717
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4725
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4517
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4806
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The commit 337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback
path") changed BAR resize to layer rebar code and resource setup/restore
code cleanly. Unfortunately, it did not consider how the value of the BAR
Size field impacts the read-only bits in the Base Address Register (PCIe7
spec, sec. 7.8.6.3). That is, it very much matters in which order the BAR
Size and Base Address Register are restored.
Post-337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback path")
during BAR resize rollback, pci_do_resource_release_and_resize() attempts
to restore the old address to the BAR that was resized, but it can fail to
setup the address correctly if the address has low bits set that collide
with the bits that are still read-only. As a result, kernel's resource and
BAR will be out-of-sync.
Fix this by restoring BAR Size before rolling back the resource changes and
restoring the BAR.
Fixes: 337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback path")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/aW_w1oFQCzUxGYtu@intel.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260121131417.9582-3-ilpo.jarvinen@linux.intel.com
|
|
The commit 337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback
path") added BAR rollback to pci_do_resource_release_and_resize() in case
of resize failure.
On the rollback, pci_claim_resource() is called, which can fail and the
code is prepared for that possibility. pci_claim_resource()'s return value,
however, overwrites the original value of ret so
pci_do_resource_release_and_resize() will return an incorrect value in the
end (as pci_claim_resource() normally succeeds, in practice ret will be 0).
Fix the issue by directly calling pci_claim_resource() inside the if ().
Fixes: 337b1b566db0 ("PCI: Fix restoring BARs on BAR resize rollback path")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/aW_w1oFQCzUxGYtu@intel.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260121131417.9582-2-ilpo.jarvinen@linux.intel.com
|
|
devres_for_each_res() is only used by .../firmware_loader/main.c, which
already includes base.h.
The usage of devres_for_each_res() by code outside of driver-core is
questionable, hence move it to base.h.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260119162920.77189-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
firmware populates MAC address, link modes (supported, advertised)
and EEPROM data in shared firmware structure which kernel access
via MAC block(CGX/RPM).
Accessing fwdata, on boards booted with out MAC block leading to
kernel panics.
Internal error: Oops: 0000000096000005 [#1] SMP
[ 10.460721] Modules linked in:
[ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT
[ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT)
[ 10.479793] Workqueue: events work_for_cpu_fn
[ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 10.491124] pc : rvu_sdp_init+0x18/0x114
[ 10.495051] lr : rvu_probe+0xe58/0x1d18
Fixes: 997814491cee ("Octeontx2-af: Fetch MAC channel info from firmware")
Fixes: 5f21226b79fd ("Octeontx2-pf: ethtool: support multi advertise mode")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260121094819.2566786-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify the internal registration helpers dpll_xa_ref_{dpll,pin}_add()
to reject duplicate registration attempts.
Previously, if a caller attempted to register the same pin multiple
times (with the same ops, priv, and cookie) on the same device, the core
silently increments the reference count and return success. This behavior
is incorrect because if the caller makes these duplicate registrations
then for the first one dpll_pin_registration is allocated and for others
the associated dpll_pin_ref.refcount is incremented. During the first
unregistration the associated dpll_pin_registration is freed and for
others WARN is fired.
Fix this by updating the logic to return `-EEXIST` if a matching
registration is found to enforce a strict "register once" policy.
Fixes: 9431063ad323 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260121130012.112606-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Fixes: 17fcb3dc12bb ("hinic3: module initialization and tx/rx logic")
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/7b8e4eb5c53cbd873ee9aaefeb3d9dbbaff52deb.1769070766.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In at91_can_probe(), the dev structure is allocated via alloc_candev().
However, if the subsequent call to devm_phy_optional_get() fails, the
code jumps directly to exit_iounmap, missing the call to free_candev().
This results in a memory leak of the allocated net_device structure.
Fix this by jumping to the exit_free label instead, which ensures that
free_candev() is called to properly release the memory.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 3ecc09856afb ("can: at91_can: add CAN transceiver support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260122114128.643752-1-zilin@seu.edu.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Another set of updates:
- various small fixes for ath10k/ath12k/mwifiex/rsi
- cfg80211 fix for HE bitrate overflow
- mac80211 fixes
- S1G beacon handling in scan
- skb tailroom handling for HW encryption
- CSA fix for multi-link
- handling of disabled links during association
* tag 'wireless-2026-11-22' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: ignore link disabled flag from userspace
wifi: mac80211: apply advertised TTLM from association response
wifi: mac80211: parse all TTLM entries
wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice
wifi: mac80211: don't perform DA check on S1G beacon
wifi: ath12k: Fix wrong P2P device link id issue
wifi: ath12k: fix dead lock while flushing management frames
wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel
wifi: ath12k: cancel scan only on active scan vdev
wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize()
wifi: mac80211: correctly check if CSA is active
wifi: cfg80211: Fix bitrate calculation overflow for HE rates
wifi: rsi: Fix memory corruption due to not set vif driver data size
wifi: ath12k: don't force radio frequency check in freq_to_idx()
wifi: ath12k: fix dma_free_coherent() pointer
wifi: ath10k: fix dma_free_coherent() pointer
====================
Link: https://patch.msgid.link/20260122110248.15450-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0f9cf96a01fd ("clk: zynqmp: divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: f7a6bed91a19 ("clk: x86: cgu: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 9e3372b2ebac ("clk: versaclock3: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate_parent() function is now deprecated, so let's
migrate to divider_determine_rate() instead so that this deprecated API
can be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cd1cb38836c0 ("clk: stm32: stm32-core: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_ro_determine_rate()
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cd1cb38836c0 ("clk: stm32: stm32-core: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: deb4740a5ff8 ("clk: sprd: div: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Note that this commit also removes a debugging message that's not really
needed.
Fixes: 9a3b6993613d ("clk: sophgo: sg2042-clkgen: convert from round_rate() to determine_rate()")
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 0879768df240 ("clk: nxp: lpc32xx: convert from round_rate() to determine_rate()")
Tested-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 215f8aa095a1 ("clk: nuvoton: ma35d1-divider: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 7b45988fcf78 ("clk: milbeaut: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_ro_determine_rate()
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: fe67c682f91c ("clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: bb40a2ef4fc9 ("clk: loongson1: convert from round_rate() to determine_rate()")
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 619a6210f398 ("clk: hisilicon: clkdivider-hi6220: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 64613d7fb42f ("clk: bm1880: convert from round_rate() to determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: cf1d95fa0c64 ("clk: bm1880: convert from divider_round_rate() to divider_determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed. Additionally, owl_divider_helper_round_rate() is no longer used,
so let's drop that from the header file as well.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 1b04e12a8bcc ("clk: actions: owl-divider: convert from round_rate() to determine_rate()")
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
owl_divider_helper_round_rate() is just a wrapper for
divider_round_rate(), which is deprecated. Let's migrate to
divider_determine_rate() instead so that this deprecated API can be
removed.
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate_parent() function is now deprecated, so let's
migrate to divider_determine_rate() instead so that this deprecated API
can be removed. Also go ahead and convert all of the driver from round
rate type to determine rate that accepts a 'struct clk_rate_request' to
simplify the overall driver code.
Acked-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
divider_determine_rate()
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed. Also go ahead and convert all of the driver from round rate
type to determine rate that accepts a 'struct clk_rate_request' to
simplify the overall driver code.
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Add device tree support to the CMDQV driver to enable usage on Tegra264
SoCs. The implementation parses the nvidia,cmdqv phandle from the SMMU
device tree node to associate each SMMU with its corresponding CMDQV
instance based on compatible string.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
A platform device is created by acpi_create_platform_device() per CMDQV's
adev. That means there is no point in going through _CRS of ACPI.
Replace all the ACPI functions with standard platform functions. And drop
all ACPI dependencies. This will make the driver compatible with DT also.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 0b4eeee2876f ("iommu/arm-smmu-qcom: Register the TBU driver in
qcom_smmu_impl_init") intended to also probe the TBU driver when
CONFIG_ARM_SMMU_QCOM_DEBUG is disabled, but also moved the corresponding
platform_driver_register() call into qcom_smmu_impl_init() which is
called from arm_smmu_device_probe().
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c47 ("driver core: enforce
device_lock for driver_match_device()") leading to a deadlock condition
described in [1].
Additionally, it was noted by Robin that the current approach is
potentially racy with async probe [2].
Hence, fix this by registering the qcom_smmu_tbu_driver from
module_init(). Unfortunately, due to the vendoring of the driver, this
requires an indirection through arm-smmu-impl.c.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/7ae38e31-ef31-43ad-9106-7c76ea0e8596@sirena.org.uk/
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Link: https://lore.kernel.org/lkml/0c0d3707-9ea5-44f9-88a1-a65c62e3df8d@arm.com/ [2]
Fixes: dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()")
Fixes: 0b4eeee2876f ("iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> #LX2160ARDB
Tested-by: Wang Jiayue <akaieurus@gmail.com>
Reviewed-by: Wang Jiayue <akaieurus@gmail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Link: https://patch.msgid.link/20260121141215.29658-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Previously, bcache hijacked the bi_end_io and bi_private fields of
the incoming bio when the backing device was in a detached state.
This is fragile and breaks if the bio is needed to be processed by
other layers.
This patch transitions to using a cloned bio embedded within a private
structure. This ensures the original bio's metadata remains untouched.
Fixes: 53280e398471 ("bcache: fix improper use of bi_end_io")
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Acked-by: Coly Li <colyli@fnnas.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ACTLR configuration for the sa8775p MDSS client was inadvertently
dropped while reworking the commit f91879fdf70b ("iommu/arm-smmu-qcom:
Add actlr settings for mdss on Qualcomm platforms"). Without this
entry, the sa8775p MDSS block does not receive the intended default
ACTLR configuration.
Restore the missing compatible entry so that the platform receives the
expected behavior.
Fixes: f91879fdf70b ("iommu/arm-smmu-qcom: Add actlr settings for mdss on Qualcomm platforms")
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add Intel Nova Lake-S LPSS PCI IDs.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260113172151.48062-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There is a PCI API to access device resources. Use it instead of
direct accesses.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/20251030113735.3741913-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The mixing of managed and non-managed resources may lead to possible
use-after-free bugs. In this driver the problematic part is the device
functionality that may just have gone behind the functions back, e.g.,
when interrupt is being served. Fix this by switching to managed resources
for PCI.
Fixes: 91a3e1f5453a ("mfd: ls2kbmc: Check for devm_mfd_add_devices() failure")
Fixes: d952bba3fbb5 ("mfd: ls2kbmc: Add Loongson-2K BMC reset function support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/20251030113735.3741913-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit c6e126de43e7 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43e7 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20251219110714.23919-1-johan@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit c6e126de43e7 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: c6e126de43e7 ("of: Keep track of populated platform devices")
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251219110947.24101-1-johan@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the TS133 compatible and affiliated driver data to qnap-mcu.
The TS133 is mostly similar to the TS233/TS433, except only having
one drive and no USB-LED.
The fan pwm-limits from the vendor-configuration also are the same
as for the TS233/TS433 variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260104173310.2685852-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
For the S2MPG10 IRQ and chained IRQ, regmap IRQ will try to create a
folder with the same name which is impossible and fails with:
debugfs: ':firmware:power-management:pmic' already exists in 'domains'
Add domain_suffix to the chained IRQ chip driver to fix it.
Fixes: ee19b52c31b3 ("mfd: sec: Use chained IRQs for s2mpg10")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260105-s2mpg10-chained-irq-domain-suffix-v1-1-01ab16204b97@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Delta TN48M switches have a Lattice CPLD that serves
multiple purposes including being a GPIO expander.
So, lets use the simple I2C MFD driver to provide the MFD core.
Also add a virtual symbol which pulls in the simple-mfd-i2c driver and
provide a common symbol on which the subdevice drivers can depend on.
Fixes: b3dcb5de6209 ("gpio: Add Delta TN48M CPLD GPIO driver")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/20220131133049.77780-2-robert.marko@sartura.hr
Link: https://lore.kernel.org/linux-gpio/20260112064950.3837737-1-rdunlap@infradead.org/
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260112-mfd-tn48m-v11-1-00c798d8cd2a@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Initialize struct apple_smc's mutex in apple_smc_probe(). Using the
mutex uninitialized surprisingly resulted only in occasional NULL
pointer dereferences in apple_smc_read() calls from the probe()
functions of sub devices.
Cc: stable@vger.kernel.org
Fixes: e038d985c9823 ("mfd: Add Apple Silicon System Management Controller")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://patch.msgid.link/20251231-macsmc-mutex_init-v2-1-5818c9dc9b29@jannau.net
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The default value of the P1 sub-device depends on the value
of P1, so P1 should have a default value here.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251225-p1-kconfig-fix-v4-2-44b6728117c1@linux.spacemit.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
