| Age | Commit message (Collapse) | Author |
|---|
|
The MaxLinear GSW1xx series of switches support using either the
(R)(G)MII interface on port 5 or the SGMII interface on port 4 to be
used as CPU port. Prepare for supporting them by defining a mask of
allowed CPU ports instead of a single port.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/879c66672d26fe49c1f5d9aa40d8ebc0f31885ab.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The two instances of struct dsa_switch_ops differ only by their
.phylink_get_caps op. Instead of having two instances of dsa_switch_ops,
rather just have a pointer to the phylink_get_caps function in
struct gswip_hw_info.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/03d72eceeb3faecdbe03ce58aab40861cf6b77c1.1755878232.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/r/20250811-clk-for-stephen-round-rate-v1-51-b3bf97b038dc@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/r/20250811-clk-for-stephen-round-rate-v1-50-b3bf97b038dc@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/r/20250811-clk-for-stephen-round-rate-v1-49-b3bf97b038dc@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Both MSM8956 and MSM8976 have MDSS 1.11 which doesn't support UBWC
(although they also have Adreno 510, which might support UBWC). Disable
UBWC support for those platforms.
Fixes: 1924272b9ce1 ("soc: qcom: Add UBWC config provider")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668503/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
MSM8929 is similar to MSM8939, it doesn't support UBWC. Provide no-UBWC
config for the platform.
Fixes: 197713d0cf01 ("soc: qcom: ubwc: provide no-UBWC configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668502/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Add UBWC configuration for SDA660 (modem-less variant of SDM660), SDM450
(similar to MSM8953), SDM632 (similar to MSM8953) and SM7325 (similar to
SC7280).
Fixes: 1924272b9ce1 ("soc: qcom: Add UBWC config provider")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668501/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
MSM8917 has MDSS 1.15 and Adreno 308, neither of which support UBWC.
Change UBWC configuration to point out that UBWC is not supported on
this platform.
Fixes: 1924272b9ce1 ("soc: qcom: Add UBWC config provider")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668500/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
The drm_atomic_get_new_connector_state() can return NULL if the
connector is not part of the atomic state. Add a check to prevent
a NULL pointer dereference.
This follows the same pattern used in dpu_encoder_update_topology()
within the same file, which checks for NULL before using conn_state.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 1ce69c265a53 ("drm/msm/dpu: move resource allocation to CRTC")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/665188/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
Sorting headers alphabetically helps locating duplicates, and makes it
easier to figure out where to insert new headers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250825163545.39303-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are only two headers using the K_64 custom constant. Moreover,
its usage tangles a code because the constant is defined in the C
file, while users are in the headers. Replace it with well defined
SZ_64K from sizes.h.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250825163545.39303-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After working with this code for a while, I came across several typos.
This patch fixes them.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250825-gpuvm-typo-fix-v1-1-14e9e78e28e6@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We're in the process of removing unneeded references to the global GPIO
base number treewide. Use the HW offset instead of the base number.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250815111733.79283-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The IXP4xx expansion bus can have simple memory-mapped GPIO
on it. Using the proper device tree bindings, support probing
this directly from the device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250822-ixp4xx-eb-mmio-gpio-v2-3-bd2edd4a9c74@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Replace hard-coded string choices with the str_low_high() helper
in two places in the ACPI code.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Link: https://patch.msgid.link/20250823220311.2035533-1-chelsyratnawat2001@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since str_obj is allocated by ACPICA in acpi_evaluate_object_typed(),
it should be free with ACPI_FREE() rather than with kfree(), so use
the former instead of the latter for freeing it.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20250822061946.472594-1-kaushlendra.kumar@intel.com
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace vzalloc() with vcalloc() in vmalloc_to_dma_addrs(). As noted in
the kernel documentation [1], open-coded multiplication in allocator
arguments is discouraged because it can lead to integer overflow.
Use vcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication.
[1]: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://patch.msgid.link/r/20250821072209.510348-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix a bug where the driver's event subscription logic for SRQ-related
events incorrectly sets obj_type for RMP objects.
When subscribing to SRQ events, get_legacy_obj_type() did not handle
the MLX5_CMD_OP_CREATE_RMP case, which caused obj_type to be 0
(default).
This led to a mismatch between the obj_type used during subscription
(0) and the value used during notification (1, taken from the event's
type field). As a result, event mapping for SRQ objects could fail and
event notification would not be delivered correctly.
This fix adds handling for MLX5_CMD_OP_CREATE_RMP in get_legacy_obj_type,
returning MLX5_EVENT_QUEUE_TYPE_RQ so obj_type is consistent between
subscription and notification.
Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://patch.msgid.link/r/8f1048e3fdd1fde6b90607ce0ed251afaf8a148c.1755088962.git.leon@kernel.org
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Lenovo 82K8 has a broken brightness control provided by nvidia_wmi_ec.
Add a quirk to prevent using it.
Reported-by: Wilson Alvarez <wilson.e.alvarez@rubonnek.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4512
Tested-by: Wilson Alvarez <wilson.e.alvarez@rubonnek.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250820170927.895573-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
functions
Use sysfs_emit() instead of snprintf()/sprintf() when writing
to sysfs buffers, as recommended by the kernel documentation.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250822124339.1739290-1-chelsyratnawat2001@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
platform_get_resource() returns NULL in case of failure, so check its
return value and propagate the error in order to prevent NULL pointer
dereference.
Fixes: 6305166c8771 ("bus: fsl-mc: Add ACPI support for fsl-mc")
Cc: stable@vger.kernel.org
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/aKwuK6TRr5XNYQ8u@pc
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
AQR115 is similar to the already supported AQR115C, having speeds up to
2.5Gbps. In fact, the two differ only in the FCBGA package size (7x11mm
vs 7x7mm for the Compact variant). So it makes sense that the feature
set is identical for the 2 drivers.
This PHY is present on the newest PCB revision E (v4.0) of the NXP
LS1046A-RDB, having replaced the RTL8211FS SGMII PHY going to fm1-mac5.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-16-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I'm not sure whether there is any similar real-life problem on AQR813
and AQR114C as were seen on the PHYs that these commit were written for:
- a7f3abcf6357 ("net: phy: aquantia: only poll GLOBAL_CFG regs on
aqr113, aqr113c and aqr115c")
- bed90b06b681 ("net: phy: aquantia: clear PMD Global Transmit Disable
bit during init")
but the inconsistency in handling between PHYs of the same generation is
striking. Apart from different firmware builds with different
provisioning, the only difference between these PHYs should be the max
link speed and/or the number of ports.
Let's try and see if there's any problem if all PHYs from the same
generation use the same config_init() method.
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Robert Marko <robimarko@gmail.com>
Cc: Paweł Owoc <frut3k7@gmail.com>
Cc: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-15-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
aqr113c_config_init() is called by AQR113, AQR113C, AQR115C, all Gen4
PHYs. Thus, rename this to aqr_gen4_config_init().
Currently, aqr113c_config_init() calls aqr_gen2_config_init(). Since
we've established that these are Gen4 PHYs, it makes sense to inherit
the Gen3 feature set as well. Currently, aqr_gen3_config_init() just
calls aqr_gen2_config_init(), so we can safely make this extra
modification and expect no functional change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-14-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I lack documentation for AQCS109, but from commit 99c864667c9f ("net:
phy: aquantia: add support for AQCS109"), it is known that "From
software point of view, it should be almost equivalent to AQR107."
Based on further conjecture of the device numbering scheme, I am
treating it as similar to AQR109 (a Gen2 PHY capable of to 2.5G).
Its current instructions are also present in other init sequences as
below:
- aqr_wait_reset_complete() ... aqr107_chip_info() as well as
aqr107_set_downshift() are in aqr_gen1_config_init()
- aqr_gen2_fill_interface_modes() is in aqr_gen2_config_init()
So it would be good to centralize this implementation by just calling
aqr_gen2_config_init().
In practice this completes support for the following features, which are
present on AQR109 already:
- Potentially reverse MDI lane order via "marvell,mdi-cfg-order"
- Restore polarity of active-high and active-low LEDs after reset.
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-13-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The AQrate Gen3 PHYs are AQR111(C), AQR112(C), and their multi-port
variants, like AQR411(C), AQR412(C).
Currently, AQR112, AQR412 and AQR412C are Gen3 PHYs supported by the
driver which have no config_init() implementation. I have hardware and
documentation that confirms they are compatible with the operations done
in aqr_gen2_config_init(), a Gen2-level function.
This is needed as a preparation for reading cached registers in
aqr_gen2_read_status(), which is a function that these PHYs already call.
The initial reading is done from:
aqr_gen2_config_init()
-> aqr_gen2_fill_interface_modes()
-> aqr_gen2_read_global_syscfg()
thus the need for them to also call aqr_gen2_config_init(), in order for
the cached register values to be available.
In expectation of Gen3-specific features, introduce aqr_gen3_config_init()
which calls aqr_gen2_config_init(). Also modify the AQR111 silicon
variants to call their generation-appropriate init function. No
functional change for these, hence the minor mention.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-12-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I don't have documentation or hardware to test, but according to commit
99c864667c9f ("net: phy: aquantia: add support for AQCS109"), "From
software point of view, it should be almost equivalent to AQR107."
I am relatively confident that the GLOBAL_CFG registers read by
aqr_gen2_fill_interface_modes() are supported, because
aqr_gen2_read_status(), currently used by AQCS109, also reads them, and
I'm unaware of any reported problem.
The change is necessary because a future patch will introduce a
requirement for all aqr_gen2_read_status() callers to have previously
called aqr_gen2_read_global_syscfg(). This is done through
aqr_gen2_fill_interface_modes().
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-11-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
aqr107_read_status()
aqr105_read_status() and aqr107_read_status() are very similar.
In fact, they are identical, save from a code snippet accessing a Gen2
feature (rate adaptation), placed at the end of aqr107_read_rate(), and
absent from aqr105_read_rate().
The code structure is:
aqr105_read_status() aqr107_read_status()
-> aqr105_read_rate() -> aqr107_read_rate()
After the recent change "net: phy: aquantia: use cached GLOBAL_CFG
registers in aqr107_read_rate()", it is absolutely trivial to
restructure the code as follows:
aqr_gen2_read_status()
-> aqr_gen1_read_status()
-> Gen2-specific stuff (read GLOBAL_CFG registers to set rate_matching)
Doing so reduces code duplication.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-10-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
aqr107_read_rate() - called from aqr107_read_status() even periodically
if there is no PHY IRQ - currently reads GLOBAL_CFG registers to
determine what kind of rate adaptation is in use for the current
phydev->speed. However, GLOBAL_CFG registers are runtime invariants, so
accessing the slow MDIO bus is unnecessary.
Reimplement aqr107_read_rate() by reading from the
priv->global_cfg[i].rade_adapt variables (where i is the entry
corresponding to the current phydev->speed).
Making this change also helps disentangle the code delta between
aqr105_read_rate() and aqr107_read_rate(). They are now identical up to
the code snippet which iterates over priv->global_cfg[]. This will help
eliminate the duplicate code in the upcoming patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 7642cc28fd37 ("net: phylink: fix PHY validation with rate
adaption"), the API contract changed and PHY drivers are no longer
required to respond to the .get_rate_matching() method for
PHY_INTERFACE_MODE_NA. This was later followed up by documentation
commit 6d4cfcf97986 ("net: phy: Update documentation for
get_rate_matching").
As such, handling PHY_INTERFACE_MODE_NA in the Aquantia PHY driver
implementation of this method is unnecessary and confusing. Remove it.
Cc: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, aqr_gen2_fill_interface_modes() reads VEND1_GLOBAL_CFG_*
registers to populate phydev->supported_interfaces. But this is not
the only place which needs to read these registers. There is also
aqr107_read_rate().
Based on the premise that these values are statically set by firmware
and the driver only needs to read them, the proposal is to read them
only once, at config_init() time, and use the cached values also in
aqr107_read_rate().
This patch only refactors the aqr_gen2_fill_interface_modes() code to
save the registers to driver memory, and to populate supported_interfaces
based on that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
callers
Since aqr_gen2_config_init() and aqr_gen2_fill_interface_modes() refer to
the feature set common to the same generation, it means all callers of
aqr_gen2_config_init() also support the Global System Configuration
registers at addresses 1E.31B -> 1E.31F, and these should be read by the
driver to figure out the list of supported interfaces for phylink.
This affects the following PHYs supported by this driver:
- Gen2: AQR107
- Gen3: AQR111, AQR111B0
- Gen4: AQR114C, AQR813.
AQR113C, a Gen4 PHY, has unmodified logic after this change, because
currently, the aqr_gen2_fill_interface_modes() call is chained after
aqr_gen2_config_init(), and after this patch, it is tail-called from the
latter function, leading to the same code flow.
At the same time, move aqr_gen2_fill_interface_modes() upwards of its
new caller, aqr_gen2_config_init(), to avoid a forward declaration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Establish a more intuitive function naming convention in this driver.
A GenX PHY must only call aqr_genY_ functions, where Y <= X.
Loosely speaking, aqr107_ is representative of Gen2 and above, except for:
- aqr107_config_init()
- aqr107_suspend()
- aqr107_resume()
- aqr107_wait_processor_intensive_op()
which are also called by AQR105, so these are renamed to Gen1.
Actually aqr107_config_init() is renamed to aqr_gen1_config_init() when
called by AQR105, and aqr_gen2_config_init() when called by all other
PHYs. The Gen2 function calls the Gen1 function, so there is no
functional change. This prefaces further Gen2-specific initialization
steps which must be omitted for AQR105. These will be added to
aqr_gen2_config_init().
In fact, many PHY drivers call an aqr*_config_init() beneath their
generation's feature set: AQR114C is a Gen4 PHY which calls
aqr_gen2_config_init(), even though AQR113C, also a Gen4 PHY which
differs only in maximum link speed, calls the richer
aqr113c_config_init() which also sets phydev->possible_interfaces.
Many of the more subtle inconsistencies of this kind will be fixed up in
later changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250821152022.1065237-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
with supported_interfaces
Introduced in commit bed90b06b681 ("net: phy: aquantia: clear PMD Global
Transmit Disable bit during init"), the clearing of MDIO_PMA_TXDIS plus
the call to aqr107_wait_processor_intensive_op() are only by chance
placed between aqr107_config_init() and aqr107_fill_interface_modes().
In other words, aqr107_fill_interface_modes() does not depend in any way
on these 2 operations.
I am only 90% sure of that, and I intend to move aqr107_fill_interface_modes()
to be a part of aqr107_config_init() in the future. So to isolate the
issue for blame attribution purposes, make these 2 functions adjacent to
each other again.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
aqr107_fill_interface_modes()
I'm unsure whether intentionate or not, but I think the (partially
observed) naming convention in this driver is that function prefixes
denote the earliest generation when a feature is available. In case of
aqr107_fill_interface_modes(), that means that the GLOBAL_CFG registers
are a Gen2 feature. Supporting evidence: the AQR105, a Gen1 PHY, does
not have these registers, thus the function is not named aqr105_*.
Based on this inferred naming scheme, I am proposing a refinement of
commit a7f3abcf6357 ("net: phy: aquantia: only poll GLOBAL_CFG regs on
aqr113, aqr113c and aqr115c") which introduced aqr113c_fill_interface_modes(),
suggesting this may be a Gen4 PHY feature.
The long-term goal is for aqr107_config_init() to tail-call
aqr107_fill_interface_modes(), such that the latter function is also
called by AQR107 itself, and many other PHY drivers. Currently it can't,
because aqr113c_config_init() calls aqr107_config_init() and then
aqr113c_fill_interface_modes(). So this would lead to a duplicate call
to aqr107_fill_interface_modes() for AQR113C.
Centralize the reading of GLOBAL_CFG registers in the AQR107 method, and
create a boolean, set to true by AQR113C, which tests whether waiting
for a non-zero value in the GLOBAL_CFG_100M register is necessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I have noticed from schematics and firmware images that the PHY for
which I've previously added support in commit 973fbe68df39 ("net: phy:
aquantia: add AQR112 and AQR412 PHY IDs") is actually an AQR412C, not
AQR412.
These are actually PHYs from the same generation, and Marvell documents
them as differing only in the size of the FCCSP package: 19x19 mm for
the AQR412, vs 14x12mm for the Compact AQR412C.
I don't think there is any point in backporting this to stable kernels,
since the PHYs are identical in capabilities, and no functional
difference is expected regardless of how the PHY is identified.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250821152022.1065237-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously loopback for MPV was supposed to be permanently enabled,
however other driver flows were able to over-ride that configuration and
disable it.
Add force_lb parameter that indicates that loopback should always be
enabled which prevents all other driver flows from disabling it.
Fixes: a9a9e68954f2 ("RDMA/mlx5: Fix vport loopback for MPV device")
Link: https://patch.msgid.link/r/cfc6b1f0f99f8100b087483cc14da6025317f901.1755088808.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The mlx5 driver currently derives max_qp_wr directly from the
log_max_qp_sz HCA capability:
props->max_qp_wr = 1 << MLX5_CAP_GEN(mdev, log_max_qp_sz);
However, this value represents the number of WQEs in units of Basic
Blocks (see MLX5_SEND_WQE_BB), not actual number of WQEs. Since the size
of a WQE can vary depending on transport type and features (e.g., atomic
operations, UMR, LSO), the actual number of WQEs can be significantly
smaller than the WQEBB count suggests.
This patch introduces a conservative estimation of the worst-case WQE size
— considering largest segments possible with 1 SGE and no inline data or
special features. It uses this to derive a more accurate max_qp_wr value.
Fixes: 938fe83c8dcb ("net/mlx5_core: New device capabilities handling")
Link: https://patch.msgid.link/r/7d992c9831c997ed5c33d30973406dc2dcaf5e89.1755088725.git.leon@kernel.org
Reported-by: Chuck Lever <cel@kernel.org>
Closes: https://lore.kernel.org/all/20250506142202.GJ2260621@ziepe.ca/
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Relaxed Ordering can improve performance in certain scenarios.
Enable it in the Data-Direct use case as well.
Link: https://patch.msgid.link/r/1221dcdda8061ba5f6bc3519044083c7438b257e.1755088503.git.leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@Nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current layout of struct ixgbe_orom_civd_info causes incorrect data
storage due to compiler-inserted padding. This results in issues when
writing OROM data into the structure.
Add the __packed attribute to ensure the structure layout matches the
expected binary format without padding.
Fixes: 70db0788a262 ("ixgbe: read the OROM version information")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, the driver increments `alloc_page_failed` when buffer allocation fails
in `ice_clean_rx_irq()`. However, this counter is intended for page allocation
failures, not buffer allocation issues.
This patch corrects the counter by incrementing `alloc_buf_failed` instead,
ensuring accurate statistics reporting for buffer allocation failures.
Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Priya Singh <priyax.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_adapter structure is used by the ice driver to connect multiple
physical functions of a device in software. It was introduced by
commit 0e2bddf9e5f9 ("ice: add ice_adapter for shared data across PFs on
the same NIC") and is primarily used for PTP support, as well as for
handling certain cross-PF synchronization.
The original design of ice_adapter used PCI address information to
determine which devices should be connected. This was extended to support
E825C devices by commit fdb7f54700b1 ("ice: Initial support for E825C
hardware in ice_adapter"), which used the device ID for E825C devices
instead of the PCI address.
Later, commit 0093cb194a75 ("ice: use DSN instead of PCI BDF for
ice_adapter index") replaced the use of Bus/Device/Function addressing with
use of the device serial number.
E825C devices may appear in "Dual NAC" configuration which has multiple
physical devices tied to the same clock source and which need to use the
same ice_adapter. Unfortunately, each "NAC" has its own NVM which has its
own unique Device Serial Number. Thus, use of the DSN for connecting
ice_adapter does not work properly. It "worked" in the pre-production
systems because the DSN was not initialized on the test NVMs and all the
NACs had the same zero'd serial number.
Since we cannot rely on the DSN, lets fall back to the logic in the
original E825C support which used the device ID. This is safe for E825C
only because of the embedded nature of the device. It isn't a discreet
adapter that can be plugged into an arbitrary system. All E825C devices on
a given system are connected to the same clock source and need to be
configured through the same PTP clock.
To make this separation clear, reserve bit 63 of the 64-bit index values as
a "fixed index" indicator. Always clear this bit when using the device
serial number as an index.
For E825C, use a fixed value defined as the 0x579C E825C backplane device
ID bitwise ORed with the fixed index indicator. This is slightly different
than the original logic of just using the device ID directly. Doing so
prevents a potential issue with systems where only one of the NACs is
connected with an external PHY over SGMII. In that case, one NAC would
have the E825C_SGMII device ID, but the other would not.
Separate the determination of the full 64-bit index from the 32-bit
reduction logic. Provide both ice_adapter_index() and a wrapping
ice_adapter_xa_index() which handles reducing the index to a long on 32-bit
systems. As before, cache the full index value in the adapter structure to
warn about collisions.
This fixes issues with E825C not initializing PTP on both NACs, due to
failure to connect the appropriate devices to the same ice_adapter.
Fixes: 0093cb194a75 ("ice: use DSN instead of PCI BDF for ice_adapter index")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_cfg_tx_topo function attempts to apply Tx scheduler topology
configuration based on NVM parameters, selecting either a 5 or 9 layer
topology.
As part of this flow, the driver acquires the "Global Configuration Lock",
which is a hardware resource associated with programming the DDP package
to the device. This "lock" is implemented by firmware as a way to
guarantee that only one PF can program the DDP for a device. Unlike a
traditional lock, once a PF has acquired this lock, no other PF will be
able to acquire it again (including that PF) until a CORER of the device.
Future requests to acquire the lock report that global configuration has
already completed.
The following flow is used to program the Tx topology:
* Read the DDP package for scheduler configuration data
* Acquire the global configuration lock
* Program Tx scheduler topology according to DDP package data
* Trigger a CORER which clears the global configuration lock
This is followed by the flow for programming the DDP package:
* Acquire the global configuration lock (again)
* Download the DDP package to the device
* Release the global configuration lock.
However, if configuration of the Tx topology fails, (i.e.
ice_get_set_tx_topo returns an error code), the driver exits
ice_cfg_tx_topo() immediately, and fails to trigger CORER.
While the global configuration lock is held, the firmware rejects most
AdminQ commands, as it is waiting for the DDP package download (or Tx
scheduler topology programming) to occur.
The current driver flows assume that the global configuration lock has been
reset by CORER after programming the Tx topology. Thus, the same PF
attempts to acquire the global lock again, and fails. This results in the
driver reporting "an unknown error occurred when loading the DDP package".
It then attempts to enter safe mode, but ultimately fails to finish
ice_probe() since nearly all AdminQ command report error codes, and the
driver stops loading the device at some point during its initialization.
The only currently known way that ice_get_set_tx_topo() can fail is with
certain older DDP packages which contain invalid topology configuration, on
firmware versions which strictly validate this data. The most recent
releases of the DDP have resolved the invalid data. However, it is still
poor practice to essentially brick the device, and prevent access to the
device even through safe mode or recovery mode. It is also plausible that
this command could fail for some other reason in the future.
We cannot simply release the global lock after a failed call to
ice_get_set_tx_topo(). Releasing the lock indicates to firmware that global
configuration (downloading of the DDP) has completed. Future attempts by
this or other PFs to load the DDP will fail with a report that the DDP
package has already been downloaded. Then, PFs will enter safe mode as they
realize that the package on the device does not meet the minimum version
requirement to load. The reported error messages are confusing, as they
indicate the version of the default "safe mode" package in the NVM, rather
than the version of the file loaded from /lib/firmware.
Instead, we need to trigger CORER to clear global configuration. This is
the lowest level of hardware reset which clears the global configuration
lock and related state. It also clears any already downloaded DDP.
Crucially, it does *not* clear the Tx scheduler topology configuration.
Refactor ice_cfg_tx_topo() to always trigger a CORER after acquiring the
global lock, regardless of success or failure of the topology
configuration.
We need to re-initialize the HW structure when we trigger the CORER. Thus,
it makes sense for this to be the responsibility of ice_cfg_tx_topo()
rather than its caller, ice_init_tx_topology(). This avoids needless
re-initialization in cases where we don't attempt to update the Tx
scheduler topology, such as if it has already been programmed.
There is one catch: failure to re-initialize the HW struct should stop
ice_probe(). If this function fails, we won't have a valid HW structure and
cannot ensure the device is functioning properly. To handle this, ensure
ice_cfg_tx_topo() returns a limited set of error codes. Set aside one
specifically, -ENODEV, to indicate that the ice_init_tx_topology() should
fail and stop probe.
Other error codes indicate failure to apply the Tx scheduler topology. This
is treated as a non-fatal error, with an informational message informing
the system administrator that the updated Tx topology did not apply. This
allows the device to load and function with the default Tx scheduler
topology, rather than failing to load entirely.
Note that this use of CORER will not result in loops with future PFs
attempting to also load the invalid Tx topology configuration. The first PF
will acquire the global configuration lock as part of programming the DDP.
Each PF after this will attempt to acquire the global lock as part of
programming the Tx topology, and will fail with the indication from
firmware that global configuration is already complete. Tx scheduler
topology configuration is only performed during driver init (probe or
devlink reload) and not during cleanup for a CORER that happens after probe
completes.
Fixes: 91427e6d9030 ("ice: Support 5 layer topology")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce a new HID quirk to indicate that this device has to be enabled
after the panel's backlight is enabled, and update the driver data for
the elan devices to enable this quirk. This cannot be a I2C HID quirk
because the kernel needs to acknowledge this before powering up the
device and read the VID/PID. When this quirk is enabled, register
.panel_enabled()/.panel_disabling() instead for the panel follower.
Also rename the *panel_prepare* functions into *panel_follower* because
they could be called in other situations now.
Fixes: bd3cba00dcc63 ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Fixes: d06651bebf99e ("HID: i2c-hid: elan: Add elan-ekth6a12nay timing")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-2-treapking@chromium.org
|
|
Some touch controllers have to be powered on after the panel's backlight
is enabled. To support these controllers, introduce .panel_enabled() and
.panel_disabling() to panel_follower_funcs and use them to power on the
device after the panel and its backlight are enabled.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-1-treapking@chromium.org
|
|
Use the device lifecycle managed allocation function. This helps prevent
mistakes like freeing out of order in cleanup functions and forgetting to
free on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250814135532.638040-1-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Issuing a reset when the driver is loaded without RDMA support, will
results in a crash as it attempts to remove RDMA's non-existent auxbus
device:
echo 1 > /sys/class/net/<if>/device/reset
BUG: kernel NULL pointer dereference, address: 0000000000000008
...
RIP: 0010:ice_unplug_aux_dev+0x29/0x70 [ice]
...
Call Trace:
<TASK>
ice_prepare_for_reset+0x77/0x260 [ice]
pci_dev_save_and_disable+0x2c/0x70
pci_reset_function+0x88/0x130
reset_store+0x5a/0xa0
kernfs_fop_write_iter+0x15e/0x210
vfs_write+0x273/0x520
ksys_write+0x6b/0xe0
do_syscall_64+0x79/0x3b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
ice_unplug_aux_dev() checks pf->cdev_info->adev for NULL pointer, but
pf->cdev_info will also be NULL, leading to the deref in the trace above.
Introduce a flag to be set when the creation of the auxbus device is
successful, to avoid multiple NULL pointer checks in ice_unplug_aux_dev().
Fixes: c24a65b6a27c7 ("iidc/ice/irdma: Update IDC to support multiple consumers")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The memory target check is a hold-over from a refactor. It's harmless
but distracting, so just remove it.
Fixes: 2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs")
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-3-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The 'tag' parameter is passed by value and is not actually used after
being incremented, so remove the increment. It's the function that calls
gm200_flcn_pio_imem_wr that is supposed to (and does) increment 'tag'.
Fixes: 0e44c2170876 ("drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)")
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
