| Age | Commit message (Collapse) | Author |
|---|
|
Rename sd_state to state to standardize the naming of the subdev state
variables and help shortening lines.
No functional change is intended.
Link: https://lore.kernel.org/r/20250822002734.23516-5-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The const keyword for pointer variables is placed before the type
everywhere except in one location. Change it to improve consistency.
No functional change is intended.
Link: https://lore.kernel.org/r/20250822002734.23516-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The mipi_csis_calculate_params() function needs to access the pad of the
connected source. The pad is already available in csis->source.pad, but
the function takes a convoluted path by getting the pad index and
indexing the source subdev's pads array. Simplify it.
No functional change is intended.
Link: https://lore.kernel.org/r/20250822002734.23516-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The v4l2_get_link_freq() macro doesn't modify the pad argument. Make it
possible to call it with a const media_pad pointer.
Link: https://lore.kernel.org/r/20250822002734.23516-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The <ufs/ufs.h> header file defines constants and data structures
related to the UFS standard. Move the enumeration types related to
tracing into a new header file because these are not defined in the UFS
standard. An intended side effect of this patch is that the tracing
enumeration types are no longer visible to UFS host drivers.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250829153841.2201700-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use secs_to_jiffies() instead of msecs_to_jiffies() and avoid scaling
'ratov_j' to milliseconds.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250828161153.3676-2-thorsten.blum@linux.dev
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix spelling errors in some comments.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250827121611.497547-1-zhao.xichao@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Reinstate the rotational media flag for the CD-ROM driver. The flag has
been cleared since commit bd4a633b6f7c ("block: move the nonrot flag to
queue_limits") and this breaks some applications.
Move queue limit configuration from get_sectorsize() to
sr_revalidate_disk() and set the rotational flag.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: bd4a633b6f7c ("block: move the nonrot flag to queue_limits")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250827113550.2614535-1-ming.lei@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
-Wflex-array-member-not-at-end has been introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the '__struct_group()' helper
to create a new tagged 'struct fc_df_desc_fpin_reg_hdr'. This structure
groups together all the members of the flexible 'struct
fc_df_desc_fpin_reg' except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from 'struct fc_df_desc_fpin_reg' to 'struct
fc_df_desc_fpin_reg_hdr'.
We also want to ensure that in case new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use '_Static_assert()'. This ensures that
the memory layout for both the flexible structure and the new tagged
struct is the same after any changes.
This approach avoids having to implement 'struct fc_df_desc_fpin_reg_hdr'
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
The above is also done for flexible structures 'struct fc_els_rdf' and
'struct fc_els_rdf_resp'
So, with these changes, fix the following warnings:
drivers/scsi/lpfc/lpfc_hw4.h:4936:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/scsi/lpfc/lpfc_hw4.h:4942:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/scsi/lpfc/lpfc_hw4.h:4947:41: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/aK6hbQLyQlvlySf8@kspp
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use int instead of u32 for 'ret' variable to store negative error codes
returned by PM8001_CHIP_DISP->set_nvmd_req().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250826093242.230344-1-rongqianfeng@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The sd_revalidate_disk() function currently returns 0 for both success
and memory allocation failure. Since none of its callers use the return
value, this return code is both unnecessary and potentially misleading.
Change the return type of sd_revalidate_disk() from int to void
and remove all return value handling. This makes the function
semantics clearer and avoids confusion about unused return codes.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Link: https://lore.kernel.org/r/20250825183940.13211-4-abinashsinghlalotra@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SCSI disk driver prints a warning when kmalloc() fails in
sd_revalidate_disk(). This is redundant because the page allocator
already reports failures unless __GFP_NOWARN is used. Keeping the extra
message only adds noise to the kernel log.
Remove the unnecessary sd_printk() call. Control flow is unchanged.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Link: https://lore.kernel.org/r/20250825183940.13211-3-abinashsinghlalotra@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A build warning was triggered due to excessive stack usage in
sd_revalidate_disk():
drivers/scsi/sd.c: In function ‘sd_revalidate_disk.isra’:
drivers/scsi/sd.c:3824:1: warning: the frame size of 1160 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This is caused by a large local struct queue_limits (~400B) allocated on
the stack. Replacing it with a heap allocation using kmalloc()
significantly reduces frame usage. Kernel stack is limited (~8 KB), and
allocating large structs on the stack is discouraged. As the function
already performs heap allocations (e.g. for buffer), this change fits
well.
Fixes: 804e498e0496 ("sd: convert to the atomic queue limits API")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Link: https://lore.kernel.org/r/20250825183940.13211-2-abinashsinghlalotra@gmail.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same.
Fixes: 472e146d1cf3 ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall")
Cc: stable@vger.kernel.org
Signed-off-by: John Evans <evans1210144@gmail.com>
Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On FSD platform, gating the reference clock (ref_clk) and putting the
UFS device in reset by asserting the reset signal during UFS suspend,
improves the power savings and ensures the PHY is fully turned off.
These operations are added as FSD specific suspend hook to avoid
unintended side effects on other SoCs supported by this driver.
Co-developed-by: Nimesh Sati <nimesh.sati@samsung.com>
Signed-off-by: Nimesh Sati <nimesh.sati@samsung.com>
Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Link: https://lore.kernel.org/r/20250821053923.69411-1-bharat.uppal@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().
Also clean up error handling in stm32_dac_set_enable_state().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250828140617.3193288-1-sakari.ailus@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for the AD7124's internal clock output. If the #clock-cells
property is present, turn on the internal clock output during probe.
If both the clocks and #clock-names properties are present (not allowed
by devicetree bindings), assume that an external clock is being used so
that we don't accidentally have two outputs fighting each other.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250828-iio-adc-ad7124-proper-clock-support-v3-4-0b317b4605e5@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support for an external clock source to the AD7124 ADC driver.
Previously, the driver only supported using the internal clock and had
bad devicetree bindings that used a fake clock to essentially select
the power mode. This is preserved for backwards compatibility.
If the clock is not named "mclk", then we know that the devicetree is
using the correct bindings and we can configure the chip to use an
external clock source rather than internal.
Also drop a redundant comment when configuring the register fields
instead of adding more.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250828-iio-adc-ad7124-proper-clock-support-v3-3-0b317b4605e5@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Make the "mclk" clock optional in the ad7124 driver. The MCLK is an
internal counter on the ADC, so it is not something that should be
coming from the devicetree. However, existing users may be using this
to essentially select the power mode of the ADC from the devicetree.
In order to not break those users, we have to keep the existing "mclk"
handling, but now it is optional.
Now, when the "mclk" clock is omitted from the devicetree, the driver
will default to the full power mode. Support for an external clock
and dynamic power mode switching can be added later if needed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250828-iio-adc-ad7124-proper-clock-support-v3-2-0b317b4605e5@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Three EDAC source files were mistakenly marked as executable when adding the
EDAC scrub controls.
These are plain C source files and should not carry the executable bit.
Correcting their modes follows the principle of least privilege and avoids
unnecessary execute permissions in the repository.
[ bp: Massage commit message. ]
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828191954.903125-1-visitorckw@gmail.com
|
|
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer overflow.
Use devm_kcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments #1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer overflow.
Use kcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication. Similarly, use size_add() instead of explicit addition
for 'uobj_chunk_num + sobj_chunk_num'.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments #1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In stream mode, the hardware needs to combine the length of the
previous literal to calculate the length of the current literal.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The device interrupt vector 3 is an error interrupt for
physical function and a reserved interrupt for virtual function.
However, the driver has not registered the reserved interrupt for
virtual function. When allocating interrupts, the number of interrupts
is allocated based on powers of two, which includes this interrupt.
When the system enables GICv4 and the virtual function passthrough
to the virtual machine, releasing the interrupt in the driver
triggers a warning.
The WARNING report is:
WARNING: CPU: 62 PID: 14889 at arch/arm64/kvm/vgic/vgic-its.c:852 its_free_ite+0x94/0xb4
Therefore, register a reserved interrupt for VF and set the
IRQF_NO_AUTOEN flag to avoid that warning.
Fixes: 3536cc55cada ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
same device
Function rate limiting is set through physical function driver.
Users configure by providing function information and rate limit values.
Before configuration, it is necessary to check whether the
provided function and PF belong to the same device.
Fixes: 22d7a6c39cab ("crypto: hisilicon/qm - add pci bdf number check")
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
address prefetch
After enabling address prefetch, check the sva module status. If all
previous prefetch requests from the sva module are not completed, then
disable the address prefetch to ensure normal execution of new task
operations. After disabling address prefetch, check if all requests
from the sva module have been completed.
Fixes: a5c164b195a8 ("crypto: hisilicon/qm - support address prefetching")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the device resumes from a suspended state, it will revert to its
initial state and requires re-enabling. Currently, the address prefetch
function is not re-enabled after device resuming. Move the address prefetch
enable to the initialization process. In this way, the address prefetch
can be enabled when the device resumes by calling the initialization
process.
Fixes: 607c191b371d ("crypto: hisilicon - support runtime PM for accelerator device")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
mode configurations
When configuring the high-performance mode register, there is no
need to verify whether the register has been successfully
enabled, as there is no possibility of a write failure for this
register.
Fixes: a9864bae1806 ("crypto: hisilicon/zip - add zip comp high perf mode configuration")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for ECB and CBC modes in the AES Engine of the DTHE V2
hardware cryptography engine.
Signed-off-by: T Pratham <t-pratham@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add missing IDs for LAN8651 devices, which are also defined in the
DT bindings.
Fixes: 5cd2340cb6a3 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250827115341.34608-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from spi_device_id table. While at this, fix
the misleading variable name (spidev is unrelated to this driver).
Fixes: 5cd2340cb6a3 ("microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250827115341.34608-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no guarantee that spi_setup succeed, so properly handle
the error case.
Fixes: aa58bec064ab ("net: ethernet: oa_tc6: implement register write operation")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250827115341.34608-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsp_hwec_enable() allocates dup pointer by kstrdup(arg),
but then it updates dup variable by strsep(&dup, ",").
As a result when it calls kfree(dup), the dup variable may be
a modified pointer that no longer points to the original allocated
memory, causing a memory leak.
The issue is the same pattern as fixed in commit c6a502c22999
("mISDN: Fix memory leak in dsp_pipeline_build()").
Fixes: 9a4381618262 ("mISDN: Remove VLAs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250828081457.36061-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce support for standard MII ioctl operations in the LAN865x
Ethernet driver by implementing the .ndo_eth_ioctl callback. This allows
PHY-related ioctl commands to be handled via phy_do_ioctl_running() and
enables support for ethtool and other user-space tools that rely on ioctl
interface to perform PHY register access using commands like SIOCGMIIREG
and SIOCSMIIREG.
This feature enables improved diagnostics and PHY configuration
capabilities from userspace.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250828114549.46116-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ptp_ocp_detach() only shuts down the watchdog timer if it is
pending. However, if the timer handler is already running, the
timer_delete_sync() is not called. This leads to race conditions
where the devlink that contains the ptp_ocp is deallocated while
the timer handler is still accessing it, resulting in use-after-free
bugs. The following details one of the race scenarios.
(thread 1) | (thread 2)
ptp_ocp_remove() |
ptp_ocp_detach() | ptp_ocp_watchdog()
if (timer_pending(&bp->watchdog))| bp = timer_container_of()
timer_delete_sync() |
|
devlink_free(devlink) //free |
| bp-> //use
Resolve this by unconditionally calling timer_delete_sync() to ensure
the timer is reliably deactivated, preventing any access after free.
Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250828082949.28189-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current code incorrectly passes (XIRCREG1_ECR | FullDuplex) as
the register address to GetByte(), instead of fetching the register
value and OR-ing it with FullDuplex. This results in an invalid
register access.
Fix it by reading XIRCREG1_ECR first, then or-ing with FullDuplex
before writing it back.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250827192645.658496-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.18
- Add support for Output Enable (OEN) on RZ/G3E,
- Add support for the RZ/T2H and RZ/N2H SoCs,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Replace redundant return value judgment with PTR_ERR_OR_ZERO() to
enhance code readability.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250815133643.418089-1-liaoyuanhong@vivo.com
|
|
Now that PPPoE sockets are freed via RCU (SOCK_RCU_FREE), it is no longer
necessary to take a reference count when looking up sockets on the receive
path. Readers are protected by RCU, so the socket memory remains valid
until after a grace period.
Convert fast-path lookups to avoid refcounting:
- Replace get_item() and sk_receive_skb() in pppoe_rcv() with
__get_item() and __sk_receive_skb().
- Rework get_item_by_addr() into __get_item_by_addr() (no refcount and
move RCU lock into pppoe_ioctl)
- Remove unnecessary sock_put() calls.
This avoids cacheline bouncing from atomic reference counting and improves
performance on the receive fast path.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250828012018.15922-2-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Like ppp_generic.c, convert the PPPoE socket hash table to use RCU for
lookups and a spinlock for updates. This removes rwlock usage and allows
lockless readers on the fast path.
- Mark hash table and list pointers as __rcu.
- Use spin_lock() to protect writers.
- Readers use rcu_dereference() under rcu_read_lock(). All known callers
of get_item() already hold the RCU read lock, so no additional locking
is needed.
- get_item() now uses refcount_inc_not_zero() instead of sock_hold() to
safely take a reference. This prevents crashes if a socket is already
in the process of being freed (sk_refcnt == 0).
- Set SOCK_RCU_FREE to defer socket freeing until after an RCU grace
period.
- Move skb_queue_purge() into sk_destruct callback to ensure purge
happens after an RCU grace period.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250828012018.15922-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some fixes for the current cycle:
- mt76: MLO regressions, offchannel handling, list corruption
- mac80211: scan allocation size, no 40 MHz EHT, signed type
- rt2x00: (randconfig) build
- cfg80211: use-after-free
- iwlwifi: config/old devices, BIOS compatibility
- mwifiex: vmalloc content leak
* tag 'wireless-2025-08-28' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (29 commits)
wifi: iwlwifi: cfg: add back more lost PCI IDs
wifi: iwlwifi: fix byte count table for old devices
wifi: iwlwifi: cfg: restore some 1000 series configs
wifi: mwifiex: Initialize the chan_stats array to zero
wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz
wifi: iwlwifi: uefi: check DSM item validity
wifi: iwlwifi: acpi: check DSM func validity
wifi: iwlwifi: if scratch is ~0U, consider it a failure
wifi: mt76: fix linked list corruption
wifi: mt76: free pending offchannel tx frames on wcid cleanup
wifi: mt76: mt7915: fix list corruption after hardware restart
wifi: mt76: mt7996: add missing check for rx wcid entries
wifi: mt76: do not add non-sta wcid entries to the poll list
wifi: mt76: mt7996: fix crash on some tx status reports
wifi: mt76: mt7996: use the correct vif link for scanning/roc
wifi: mt76: mt7996: disable beacons when going offchannel
wifi: mt76: prevent non-offchannel mgmt tx during scan/roc
wifi: mt76: mt7925: skip EHT MLD TLV on non-MLD and pass conn_state for sta_cmd
wifi: mt76: mt7925u: use connac3 tx aggr check in tx complete
wifi: mt76: mt7925: fix the wrong bss cleanup for SAP
...
====================
Link: https://patch.msgid.link/20250828122654.1167754-8-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembler code, __ASSEMBLY__ is a macro
that only gets defined by the Makefiles in the kernel. Defining
such a macro was necessary in the early days of the kernel, since GCC
only started providing __ASSEMBLER__ since version 3.0 in 2000 (see
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=f8f769ea4e69 ).
However, having two macros can be very confusing nowadays for the
developers when switching between userspace and kernelspace coding,
or when dealing with uapi headers that should use __ASSEMBLER__
instead. So let's now standardize on the __ASSEMBLER__ macro that is
provided by the compilers.
This is almost a completely mechanical patch (done with a simple
"sed -i" statement), with just one comment tweaked manually in
arch/mips/include/asm/cpu.h (that was missing some underscores).
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26fb ("idpf: do not linearize big TSO packets")
6c4e68480238 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the creation of debugfs files into a dedicated function, and ensure
they are explicitly removed during vhci_release(), before associated
data structures are freed.
Previously, debugfs files such as "force_suspend", "force_wakeup", and
others were created under hdev->debugfs but not removed in
vhci_release(). Since vhci_release() frees the backing vhci_data
structure, any access to these files after release would result in
use-after-free errors.
Although hdev->debugfs is later freed in hci_release_dev(), user can
access files after vhci_data is freed but before hdev->debugfs is
released.
Fixes: ab4e4380d4e1 ("Bluetooth: Add vhci devcoredump support")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
People not very intimate with EFI may not know the meaning of the OVMF
acronym. Write it in full, to help users with making good decisions
when configuring their kernels.
Fixes: f393a761763c5427 ("efi: add ovmf debug log driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This ensures that the memory write and the interrupt are properly
ordered and we won't wake up the kernel before the semaphore write has
hit memory.
Fixes: b1ca384772b6 ("drm/nouveau/gv100-: switch to volta semaphore methods")
Cc: stable@vger.kernel.org
Signed-off-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250829021633.1674524-2-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Nouveau has code that when it gets an IRQ with no allowed handler
it disables it to avoid storms.
However with nonstall interrupts, we often disable them from
the drm driver, but still request their emission via the push submission.
Just don't disable nonstall irqs ever in normal operation, the
event handling code will filter them out, and the driver will
just enable/disable them at load time.
This fixes timeouts we've been seeing on/off for a long time,
but they became a lot more noticeable on Blackwell.
This doesn't fix all of them, there is a subsequent fence emission
fix to fix the last few.
Fixes: 3ebd64aa3c4f ("drm/nouveau/intr: support multiple trees, and explicit interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250829021633.1674524-1-airlied@gmail.com
[ Fix a typo and a minor checkpatch.pl warning; remove "v2" from commit
subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
