| Age | Commit message (Collapse) | Author |
|---|
|
The conversion to modules requires a correct handling of the module
refcount in order to prevent to unload it if it is in use. That is
especially true with the clockevents where there is no function to
unregister them.
The core time framework correctly handles the module refcount with the
different clocksource and clockevents if the module owner is set.
Add the module owner to make sure the core framework will prevent
stupid things happening when the driver will be converted into a
module.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250602151853.1942521-2-daniel.lezcano@linaro.org
|
|
can_set_static_ctrlmode() is declared as a static inline. But it is
only called in the probe function of the devices and so does not
really benefit from any kind of optimization.
Transform it into a "normal" function by moving it to
drivers/net/can/dev/dev.c
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250923-can-fix-mtu-v3-2-581bde113f52@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
During conversion of WARN_ON_ONCE to drm_WARN_ON_ONCE in
commit 2d2f1dc74cfb ("drm: gud: replace WARN_ON/WARN_ON_ONCE with
drm versions"), the IS_ERR check was accidentally removed, breaking
the gud_connector_add_properties() function, as any valid pointer
in state_val would produce an error.
The warning was reported by kernel test robot, and is fixed in this patch.
Fixes: 2d2f1dc74cfb ("drm: gud: replace WARN_ON/WARN_ON_ONCE with drm versions")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202509212215.c8v3RKmL-lkp@intel.com/
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250922173836.5608-1-rubenru09@aol.com
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change add a new WQ_PERCPU flag, to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250922102407.186660-2-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently we check if the encoder is INVALID or -1 and throw a
WARN_ON but we still end up writing the temp value which will
overflow and corrupt the whole programmed value.
--v2
-Assign a bogus transcoder to master in case we get a INVALID
TRANSCODER [Jani]
Fixes: 6671c367a9bea ("drm/i915/tgl: Select master transcoder for MST stream")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250908042208.1011144-1-suraj.kandpal@intel.com
(cherry picked from commit c8e8e9ab14a6ea926641d161768e1e3ef286a853)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Without O_LARGEFILE, file->f_op->write_iter calls
generic_write_check_limits(), which enforces a 2GB (MAX_NON_LFS) limit,
causing -EFBIG on large writes.
In shmem_pwrite(), this error is later masked as -EIO due to the error
handling order, leading to igt failures like gen9_exec_parse(bb-large).
Set O_LARGEFILE in __create_shmem() to prevent -EFBIG on large writes.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508081029.343192ec-lkp@intel.com
Fixes: 048832a3f400 ("drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter")
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250822030651.28099-1-chentaotao@didiglobal.com
(cherry picked from commit e296a2266c572a7537e638b0dbbfc66d11df46f9)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v6.18
Highlights for some specific drivers include:
ath10k:
Fix connection after GTK rekeying
ath12k:
Fix Issues in REO RX Queue Updates
Handle inactivity STA kickout event
And of course there is the usual set of cleanups and bug fixes across
the entire family of "ath" drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 79525b51acc1 ("io_uring: fix nvme's 32b cqes on mixed cq") split
out a separate io_uring_cmd_done32() helper for ->uring_cmd()
implementations that return 32-byte CQEs. The res2 value passed to
io_uring_cmd_done() is now unused because __io_uring_cmd_done() ignores
it when is_cqe32 is passed as false. So drop the parameter from
io_uring_cmd_done() to simplify the callers and clarify that it's not
possible to return an extra value beyond the 32-bit CQE result.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6
destination values to the source address field (saddr) when
processing pedit offsets within the destination address range.
This patch corrects the assignment to use daddr instead of saddr,
ensuring that pedit operations on IPv6 destination addresses are
applied correctly.
Fixes: 9b9eb518e338 ("bnxt_en: Add support for NAT(L3/L4 rewrite)")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't deinitialize and reinitialize the HAL helpers. The dma memory is
deallocated and there is high possibility that we'll not be able to get
the same memory allocated from dma when there is high memory pressure.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Cc: stable@vger.kernel.org
Cc: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250722053121.1145001-1-usama.anjum@collabora.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add functions to add a filter to the VNIC to configure unicast
addresses. Also, add multicast, broadcast, and promiscuous settings
to the default VNIC.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-11-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocate the default VNIC with the firmware and configure its RSS,
HDS, and Jumbo parameters. Add related functions to support VNIC
configuration for these parameters.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-10-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable ring functionality by registering RX, AGG, TX, CMPL, and
NQ rings with the firmware. Initialise the doorbells associated
with the rings.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-9-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocate the hardware statistics context with the firmware and
register DMA memory required for ring statistics. This helps the
driver to collect ring statistics provided by the firmware.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-8-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Populate packet buffers into the RX and AGG rings while these
rings are being initialized.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-7-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add initial settings to all core resources, such as
the RX, AGG, TX, CQ, and NQ rings, as well as the VNIC.
This will help enable these resources in future patches.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-6-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the VNIC-specific structures and DMA memory necessary to support
UC/MC and RSS functionality.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-5-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocate CP and NQ related data structures and add support to
associate NQ and CQ rings. Also, add the association of NQ, NAPI,
and interrupts.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-4-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allocate data structures to support RX, AGG, and TX rings.
While data structures for RX/AGG rings are allocated,
initialise the page pool accordingly.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-3-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure bnge_alloc_ring() frees any intermediate allocations
when it fails. This enables later patches to rely on this
self-unwinding behavior.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20250919174742.24969-2-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly
request the use of the per-CPU behavior. Both flags coexist for one release
cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-3-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-2-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-19 (ice, idpf, iavf, ixgbevf, fm10k)
Paul adds support for Earliest TxTime First (ETF) hardware offload
for E830 devices on ice. ETF is configured per-queue using tc-etf Qdisc;
a new Tx flow mechanism utilizes a dedicated timestamp ring alongside
the standard Tx ring. The timestamp ring contains descriptors that
specify when hardware should transmit packets; up to 2048 Tx queues can
be supported.
Additional info: https://lore.kernel.org/intel-wired-lan/20250818132257.21720-1-paul.greenwalt@intel.com/
Dave removes excess cleanup call to ice_lag_move_new_vf_nodes() in error
path.
Milena adds reporting of timestamping statistics to idpf.
Alex changes error variable type for code clarity for iavf and ixgbevf.
Brahmajit Das removes unused parameter from fm10k_unbind_hw_stats_q().
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
net: intel: fm10k: Fix parameter idx set but not used
ixgbevf: fix proper type for error code in ixgbevf_resume()
iavf: fix proper type for error code in iavf_resume()
idpf: add HW timestamping statistics
ice: Remove deprecated ice_lag_move_new_vf_nodes() call
ice: add E830 Earliest TxTime First Offload support
ice: move ice_qp_[ena|dis] for reuse
====================
Link: https://patch.msgid.link/20250919175412.653707-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
i40e: virtchnl improvements
Przemek Kitszel says:
Improvements hardening PF-VF communication for i40e driver.
This patchset targets several issues that can cause undefined behavior
or be exploited in some other way.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: improve VF MAC filters accounting
i40e: add mask to apply valid bits for itr_idx
i40e: add max boundary check for VF filters
i40e: fix validation of VF state in get resources
i40e: fix input validation logic for action_meta
i40e: fix idx validation in config queues msg
i40e: fix idx validation in i40e_validate_queue_map
i40e: add validation for ring_len param
====================
Link: https://patch.msgid.link/20250919184959.656681-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the PHY_ID_MATCH_MODEL() macro instead of hardcoding the values in
asix_driver[] and asix_tbl[].
In asix_tbl[], the macro also uses designated initializers instead of
positional initializers, which allows the struct fields to be reordered.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250919103944.854845-2-thorsten.blum@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing "Return:" sections to kernel-doc comments for four functions:
- axienet_calc_cr()
- axienet_device_reset()
- axienet_free_tx_chain()
- axienet_dim_coalesce_count_rx()
Also standardize the return documentation format by replacing inline
"Returns" text with proper "Return:" tags as per kernel documentation
guidelines.
Fixes below kernel-doc warnings:
- Warning: No description found for return value of 'axienet_calc_cr'
- Warning: No description found for return value of 'axienet_device_reset'
- Warning: No description found for return value of 'axienet_free_tx_chain'
- Warning: No description found for return value of
'axienet_dim_coalesce_count_rx'
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20250919103754.434711-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At reset, the KSZ8463 uses a strap-based configuration to set SPI as
bus interface. SPI is the only bus supported by the driver. If the
required pull-ups/pull-downs are missing (by mistake or by design to
save power) the pins may float and the configuration can go wrong
preventing any communication with the switch.
Introduce a ksz8463_configure_straps_spi() function called during the
device reset. It relies on the 'straps-rxd-gpios' OF property and the
'reset' pinmux configuration to enforce SPI as bus interface.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20250918-ksz-strap-pins-v3-3-16662e881728@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the old sfp_parse_*() functions that are now no longer used.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uydVz-000000061Wj-13Yd@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update all PHYs to use sfp_get_module_caps() rather than the
sfp_parse_*() family of functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uydVu-000000061Wd-0cAG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use sfp_get_module_caps() to get SFP module's capabilities.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uydVp-000000061WW-08YM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a function to retrieve the current sfp_module_caps structure
so that upstreams can get the entire module support in one go.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uydVj-000000061WQ-3q47@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to provide extensible module support properties, arrange for
the SFP quirks to modify any member of the sfp_module_support struct,
rather than just the ethtool link modes and interfaces.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uydVe-000000061WK-3KwI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pre-parse the module support on insert rather than when the upstream
requests the data. This will allow more flexible and extensible
parsing.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1uydVZ-000000061WE-2pXD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make use of the newly-available `Alignment` type and remove the
corresponding TODO item.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Currently, the QMI interface only works on little endian systems due to how
it encodes and decodes data. Most QMI related data structures do not use
endian specific types and are already defined in CPU native order. The
ath12k specific QMI structs are an exception: they use partially endian
specific types, which prevents the QMI interface from being extended to
support big endian systems.
Update the two affected ath12k QMI structs to use CPU order types instead.
This is required because the QMI interface is being extended to support big
endian system, and that support depends on QMI data structures being
defined in CPU native order.
This change:
* preserves compatibility with existing kernels, which only support little
endian system
* enables future support for big endian systems
* aligns ath12k QMI handling with the general QMI design
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250922061607.11543-1-alexander.wilhelm@westermo.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, if the descriptor size exceeds 128 bytes, the total
descriptor is split into multiple 128-byte segments, each
requiring a separate flush cache queue command. This results in
multiple commands being issued to flush a single TID, which
negatively impacts performance. To optimize this, use the
_FLUSH_QUEUE_1K_DESC REO command to flush a 1KB descriptor in a single
operation to optimize performance.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-8-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Flush cache failures were observed after RX queue update for TID
delete. This occurred because the queue was invalid during flush.
Set the VLD bit in the RX queue update command for TID delete.
This ensures the queue remains valid during the flush cache process.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-7-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
During stress test scenarios, when the REO command ring becomes full,
the RX queue update command issued during peer deletion fails due to
insufficient space. In response, the host performs a dma_unmap and
frees the associated memory. However, the hardware still retains a
reference to the same memory address. If the kernel later reallocates
this address, unaware that the hardware is still using it, it can
lead to memory corruption-since the host might access or modify
memory that is still actively referenced by the hardware.
Implement a retry mechanism for the HAL_REO_CMD_UPDATE_RX_QUEUE
command during TID deletion to prevent memory corruption. Introduce
a new list, reo_cmd_update_rx_queue_list, in the struct ath12k_dp to
track pending RX queue updates. Protect this list with
reo_rxq_flush_lock, which also ensures synchronized access to
reo_cmd_cache_flush_list. Defer memory release until hardware
confirms the virtual address is no longer in use, avoiding immediate
deallocation on command failure. Release memory for pending RX queue
updates via ath12k_dp_rx_reo_cmd_list_cleanup() on system reset
if hardware confirmation is not received.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Co-developed-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-6-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Introduce ath12k_dp_rx_tid_rxq as a lightweight structure to represent
only the necessary fields for REO command construction. Replace direct
usage of ath12k_dp_rx_tid in REO command paths with this new structure.
This decouples REO command logic from internal TID state representation,
improves modularity, and reduces unnecessary data dependencies.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-5-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Introduce ath12k_dp_rx_tid_cleanup() to handle RX TID buffer
unmapping and freeing. This replaces duplicated cleanup logic
across multiple code paths.
This improves code maintainability and avoids redundancy in
buffer cleanup operations.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-4-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Refactor RX TID deletion handling by moving the REO command
setup and send sequence into a new helper function:
ath12k_dp_rx_tid_delete_handler().
This improves code readability and modularity, and prepares
the codebase for potential reuse of the REO command logic in
other contexts where RX TID deletion is required.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-3-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Increase DP_REO_CMD_RING_SIZE from 128 to 256 to avoid
queuing failures observed during stress test scenarios.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Nithyanantham Paramasivam <nithyanantham.paramasivam@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250806111750.3214584-2-nithyanantham.paramasivam@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
The Rockchip PCIe PHY driver, used on the RK3399, has its own definition
of HIWORD_UPDATE.
Remove it, and replace instances of it with hw_bitfield.h's
FIELD_PREP_WM16. To achieve this, some mask defines are reshuffled, as
FIELD_PREP_WM16 uses the mask as both the mask of bits to write and to
derive the shift amount from in order to shift the value.
In order to ensure that the mask is always a constant, the inst->index
shift is performed after the FIELD_PREP_WM16, as this is a runtime
value.
>From this, we gain compile-time error checking, and in my humble opinion
nicer code, as well as a single definition of this macro across the
entire codebase to aid in code comprehension.
Tested on a RK3399 ROCKPro64, where PCIe still works as expected when
accessing an NVMe drive.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
The sp7021 clock driver has its own shifted high word mask macro,
similar to the ones many Rockchip drivers have.
Remove it, and replace instances of it with hw_bitfield.h's
FIELD_PREP_WM16 macro, which does the same thing except in a common
macro that also does compile-time error checking.
This was compile-tested with 32-bit ARM with Clang, no runtime tests
were performed as I lack the hardware. However, I verified that fix
commit 5c667d5a5a3e ("clk: sp7021: Adjust width of _m in HWM_FIELD_PREP()")
is not regressed. No warning is produced.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
|
|
Replace the opencoded for_each_cpu(cpu, cpu_online_mask) loop with the
more readable and equivalent for_each_online_cpu(cpu) macro.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Link: https://lore.kernel.org/r/20250811065216.3320-1-wangfushuai@baidu.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix build after header cleanup
- hci_sync: Fix hci_resume_advertising_sync
- hci_event: Fix UAF in hci_conn_tx_dequeue
- hci_event: Fix UAF in hci_acl_create_conn_sync
- MGMT: Fix possible UAFs
* tag 'for-net-2025-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix possible UAFs
Bluetooth: hci_event: Fix UAF in hci_acl_create_conn_sync
Bluetooth: hci_event: Fix UAF in hci_conn_tx_dequeue
Bluetooth: hci_sync: Fix hci_resume_advertising_sync
Bluetooth: Fix build after header cleanup
====================
Link: https://patch.msgid.link/20250922143315.3007176-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While most of the statistics functions (emac_get_stats64() and such) are
called with softirqs enabled, emac_stats_timer() is, as its name
suggests, also called from a timer, i.e. called in softirq context.
All of these take stats_lock. Therefore, make stats_lock softirq-safe by
changing spin_lock() into spin_lock_bh() for the functions that get
statistics.
Also, instead of directly calling emac_stats_timer() in emac_up() and
emac_resume(), set the timer to trigger instead, so that
emac_stats_timer() is only called from the timer. It will keep using
spin_lock().
This fixes a lockdep warning, and potential deadlock when stats_timer is
triggered in the middle of getting statistics.
Fixes: bfec6d7f2001 ("net: spacemit: Add K1 Ethernet MAC")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/a52c0cf5-0444-41aa-b061-a0a1d72b02fe@samsung.com/
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20250919-k1-ethernet-fix-lock-v1-1-c8b700aa4954@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 61f132ca8c46 ("ptp: add helpers to get the phc_index by
of_node or dev") has added two generic interfaces to get the phc_index
of the PTP clock. This eliminates the need for PTP device drivers to
provide custom APIs for consumers to retrieve the phc_index. This has
already been implemented for ENETC v4 and is also applicable to ENETC
v1. Therefore, the global variable enetc_phc_index is removed from the
driver. ENETC v1 now uses the same interface as v4 to get phc_index.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250919084509.1846513-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rcu_read_lock() has been introduced in __ethtool_get_ts_info() since
the commit 4c61d809cf60 ("net: ethtool: Fix suspicious rcu_dereference
usage"). Therefore, the device drivers cannot use any sleeping functions
when implementing the callback of ethtool_ops::get_ts_info(). Currently,
pci_get_slot() is used in enetc_get_ts_info(), but it calls down_read()
which might sleep, so this is a potential issue. Therefore, to fix this
issue, pci_get_domain_bus_and_slot() is used to replace pci_get_slot()
in enetc_get_ts_info().
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Closes: https://lore.kernel.org/netdev/20250918124823.t3xlzn7w2glzkhnx@skbuf/
Fixes: f5b9a1cde0a2 ("net: enetc: add PTP synchronization support for ENETC v4")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250919084509.1846513-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
