| Age | Commit message (Collapse) | Author |
|---|
|
Add VID 13d3 & PID 3627 for MediaTek MT7922 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3627 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The "h4_recv.h" header contains a duplicate h4_recv_buf() that is nearly
but not quite identical to the h4_recv_buf() in hci_h4.c.
This duplicated header was added in commit 07eb96a5a7b0 ("Bluetooth:
bpa10x: Use separate h4_recv_buf helper"). I wasn't able to find any
explanation for duplicating the code in the discussion:
https://lore.kernel.org/all/20180320181855.37297-1-marcel@holtmann.org/
https://lore.kernel.org/all/20180324091954.73229-2-marcel@holtmann.org/
Unfortunately, in the years since, several other drivers have come to
also rely on this duplicated function, probably by accident. This is, at
the very least, *extremely* confusing. It's also caused real issues when
it's become out-of-sync, see the following:
ef564119ba83 ("Bluetooth: hci_h4: Add support for ISO packets")
61b27cdf025b ("Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h")
This is the full diff between the two implementations today:
--- orig.c
+++ copy.c
@@ -1,117 +1,100 @@
{
- struct hci_uart *hu = hci_get_drvdata(hdev);
- u8 alignment = hu->alignment ? hu->alignment : 1;
-
/* Check for error from previous call */
if (IS_ERR(skb))
skb = NULL;
while (count) {
int i, len;
- /* remove padding bytes from buffer */
- for (; hu->padding && count > 0; hu->padding--) {
- count--;
- buffer++;
- }
- if (!count)
- break;
-
if (!skb) {
for (i = 0; i < pkts_count; i++) {
if (buffer[0] != (&pkts[i])->type)
continue;
skb = bt_skb_alloc((&pkts[i])->maxlen,
GFP_ATOMIC);
if (!skb)
return ERR_PTR(-ENOMEM);
hci_skb_pkt_type(skb) = (&pkts[i])->type;
hci_skb_expect(skb) = (&pkts[i])->hlen;
break;
}
/* Check for invalid packet type */
if (!skb)
return ERR_PTR(-EILSEQ);
count -= 1;
buffer += 1;
}
len = min_t(uint, hci_skb_expect(skb) - skb->len, count);
skb_put_data(skb, buffer, len);
count -= len;
buffer += len;
/* Check for partial packet */
if (skb->len < hci_skb_expect(skb))
continue;
for (i = 0; i < pkts_count; i++) {
if (hci_skb_pkt_type(skb) == (&pkts[i])->type)
break;
}
if (i >= pkts_count) {
kfree_skb(skb);
return ERR_PTR(-EILSEQ);
}
if (skb->len == (&pkts[i])->hlen) {
u16 dlen;
switch ((&pkts[i])->lsize) {
case 0:
/* No variable data length */
dlen = 0;
break;
case 1:
/* Single octet variable length */
dlen = skb->data[(&pkts[i])->loff];
hci_skb_expect(skb) += dlen;
if (skb_tailroom(skb) < dlen) {
kfree_skb(skb);
return ERR_PTR(-EMSGSIZE);
}
break;
case 2:
/* Double octet variable length */
dlen = get_unaligned_le16(skb->data +
(&pkts[i])->loff);
hci_skb_expect(skb) += dlen;
if (skb_tailroom(skb) < dlen) {
kfree_skb(skb);
return ERR_PTR(-EMSGSIZE);
}
break;
default:
/* Unsupported variable length */
kfree_skb(skb);
return ERR_PTR(-EILSEQ);
}
if (!dlen) {
- hu->padding = (skb->len + 1) % alignment;
- hu->padding = (alignment - hu->padding) % alignment;
-
/* No more data, complete frame */
(&pkts[i])->recv(hdev, skb);
skb = NULL;
}
} else {
- hu->padding = (skb->len + 1) % alignment;
- hu->padding = (alignment - hu->padding) % alignment;
-
/* Complete frame */
(&pkts[i])->recv(hdev, skb);
skb = NULL;
}
}
return skb;
}
-EXPORT_SYMBOL_GPL(h4_recv_buf)
As I read this: If alignment is one, and padding is zero, padding
remains zero throughout the loop. So it seems to me that the two
functions behave strictly identically in that case. All the duplicated
defines are also identical, as is the duplicated h4_recv_pkt structure
declaration.
All four drivers which use the duplicated function use the default
alignment of one, and the default padding of zero. I therefore conclude
the duplicate function may be safely replaced with the core one.
I raised this in an RFC a few months ago, and didn't get much interest:
https://lore.kernel.org/all/CABBYNZ+ONkYtq2fR-8PtL3X-vetvJ0BdP4MTw9cNpjLDzG3HUQ@mail.gmail.com/
...but I'm still wary I've missed something, and I'd really appreciate
more eyeballs on it.
I tested this successfully on btnxpuart a few months ago, but
unfortunately I no longer have access to that hardware.
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Some Barrot based USB Bluetooth dongles erroneously send one extra
random byte for the HCI_OP_READ_LOCAL_EXT_FEATURES command. The
consequence of that is that the next HCI transfer is misaligned by one
byte causing undefined behavior. In most cases the response event for
the next command fails with random error code.
Since the HCI_OP_READ_LOCAL_EXT_FEATURES command is used during HCI
controller initialization, the initialization fails rendering the USB
dongle not usable.
> [59.464099] usb 1-1.3: new full-speed USB device number 11 using xhci_hcd
> [59.561617] usb 1-1.3: New USB device found, idVendor=33fa, idProduct=0012, bcdDevice=88.91
> [59.561642] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [59.561656] usb 1-1.3: Product: UGREEN BT6.0 Adapter
> [61.720116] Bluetooth: hci1: command 0x1005 tx timeout
> [61.720167] Bluetooth: hci1: Opcode 0x1005 failed: -110
This patch was tested with the 33fa:0012 device. The info from the
/sys/kernel/debug/usb/devices is shown below:
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 12 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=33fa ProdID=0012 Rev=88.91
S: Product=UGREEN BT6.0 Adapter
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Now the device is initialized properly:
> [43.329852] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
> [43.446790] usb 1-1.4: New USB device found, idVendor=33fa, idProduct=0012, bcdDevice=88.91
> [43.446813] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [43.446821] usb 1-1.4: Product: UGREEN BT6.0 Adapter
> [43.582024] Bluetooth: hci1: Unexpected continuation: 1 bytes
> [43.703025] Bluetooth: hci1: Unexpected continuation: 1 bytes
> [43.750141] Bluetooth: MGMT ver 1.23
Link: https://github.com/bluez/bluez/issues/1326
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Tested-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
As device coredumps are not HCI traces, maintain the device coredump at
the driver level and eliminate the dependency on hdev_devcd*()
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 07e6bddb54b4 ("Bluetooth: btintel_pcie: Add support for device coredump")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
kzalloc() already zero-initializes the destination buffer 'data', making
strscpy() sufficient for safely copying 'name'. The additional
NUL-padding performed by strscpy_pad() is unnecessary.
Add a new local variable to store the length of 'name' and reuse it
instead of recalculating the same length.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Implement hdev->wakeup() callback to support Wake On BT feature.
Test steps:
1. echo enabled > /sys/bus/pci/devices/0000:00:14.7/power/wakeup
2. connect bluetooth hid device
3. put the system to suspend - rtcwake -m mem -s 300
4. press any key on hid to wake up the system
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add USB ID 2001:332a for D-Link AX9U rev. A1 which is based on a Realtek
RTL8851BU chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2001 ProdID=332a Rev= 0.00
S: Manufacturer=Realtek
S: Product=802.11ax WLAN Adapter
S: SerialNumber=00e04c000001
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtw89_8851bu_git
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This prevents the comments going over 80 columns which is still
required for Bluetooth code.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
sudo lspci -v -k -d 8086:e376
00:14.7 Bluetooth: Intel Corporation Device e376
Subsystem: Intel Corporation Device 0011
Flags: bus master, fast devsel, latency 0, IRQ 16, IOMMU group 14
Memory at 14815368000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [80] MSI-X: Enable+ Count=32 Masked-
Capabilities: [100] Latency Tolerance Reporting
Kernel driver in use: btintel_pcie
Kernel modules: btintel_pcie
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add Bluetooth CNVi core and platform names to the PCI device table for
each device ID as a comment.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This patch implements _suspend() and _resume() functions for the
Bluetooth controller. When the system enters a suspended state, the
driver notifies the controller to perform necessary housekeeping tasks
by writing to the sleep control register and waits for an alive
interrupt. The firmware raises the alive interrupt when it has
transitioned to the D3 state. The same flow occurs when the system
resumes.
Command to test host initiated wakeup after 60 seconds
sudo rtcwake -m mem -s 60
dmesg log (tested on Whale Peak2 on Panther Lake platform)
On system suspend:
[Fri Jul 25 11:05:37 2025] Bluetooth: hci0: device entered into d3 state from d0 in 80 us
On system resume:
[Fri Jul 25 11:06:36 2025] Bluetooth: hci0: device entered into d0 state from d3 in 7117 us
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add support for the BlazarIW Bluetooth core used in the Wildcat Lake
platform.
HCI traces:
< HCI Command: Intel Read Version (0x3f|0x0005) plen 1
Requested Type:
All Supported Types(0xff)
> HCI Event: Command Complete (0x0e) plen 122
Intel Read Version (0x3f|0x0005) ncmd 1
Status: Success (0x00)
.....
CNVi BT(18): 0x00223700 - BlazarIW(0x22)
.....
.....
Signed-off-by: Vijay Satija <vijay.satija@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Device links with DL_FLAG_SYNC_STATE_ONLY should not affect system
suspend and resume, and functions like device_reorder_to_tail() and
device_link_add() don't try to reorder the consumers with that flag.
However, dpm_wait_for_consumers() and dpm_wait_for_suppliers() don't
check thas flag before triggering dpm_wait(), leading to potential hang
during suspend/resume.
This can be reproduced on MT8186 Corsola Chromebook with devicetree like:
usb-a-connector {
compatible = "usb-a-connector";
port {
usb_a_con: endpoint {
remote-endpoint = <&usb_hs>;
};
};
};
usb_host {
compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
port {
usb_hs: endpoint {
remote-endpoint = <&usb_a_con>;
};
};
};
In this case, the two nodes form a cycle and a SYNC_STATE_ONLY devlink
between usb_host (supplier) and usb-a-connector (consumer) is created.
Address this by exporting device_link_flag_is_sync_state_only() and
making dpm_wait_for_consumers() and dpm_wait_for_suppliers() use it
when deciding if dpm_wait() should be called.
Fixes: 05ef983e0d65a ("driver core: Add device link support for SYNC_STATE_ONLY flag")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Link: https://patch.msgid.link/20250926102320.4053167-1-treapking@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pm_runtime.h docs say pm_runtime_put() and pm_runtime_put_sync()
return 1 when already suspended, but this is not true -- they return
-EAGAIN. On the other hand, pm_runtime_put_sync_suspend() and
pm_runtime_put_sync_autosuspend() *do* return 1.
This is an artifact of the fact that the former are built on rpm_idle(),
whereas the latter are built on rpm_suspend().
There are precious few pm_runtime_put()/pm_runtime_put_sync() callers
that check the return code at all, but most of them only log errors, and
usually only for negative error codes. None of them should be treating
this as an error, so:
* at best, this may fix some case where a driver treats this condition
as an error, when it shouldn't;
* at worst, this should make no effect; and
* somewhere in between, we could potentially clear up non-fatal log
messages.
Fix the pm_runtime_already_suspended_test() while tweaking the behavior.
The test makes a lot more sense when these all return 1 when the device
is already suspended:
pm_runtime_put_sync(dev);
pm_runtime_suspend(dev);
pm_runtime_autosuspend(dev);
pm_request_autosuspend(dev);
pm_runtime_put_sync_autosuspend(dev);
Notably, I've avoided testing the return codes for these, since they
really should be ignored by callers, and we may make them 'void'
altogether:
pm_runtime_put(dev);
pm_runtime_put_autosuspend(dev);
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In exploring the various return codes and failure modes of runtime PM
APIs, I found it helpful to verify and codify many of them in unit
tests, especially given that even the kerneldoc can be rather complex to
reason through, and it also has had subtle errors of its own.
Notably, I avoid testing the return codes for pm_runtime_put() and
pm_runtime_put_autosuspend(), since code that checks them is probably
wrong, and we're considering making them return 'void' altogether. I
still test the sync() variants, since those have a bit more meaning to
them.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
bp->dev->dev_addr is of type `unsigned char *`. Casting it to a u32
pointer and dereferencing implies dealing manually with endianness,
which is error-prone.
Replace by calls to get_unaligned_le32|le16() helpers.
This was found using sparse:
⟩ make C=2 drivers/net/ethernet/cadence/macb_main.o
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] bottom
got restricted __le32 [usertype]
warning: incorrect type in assignment (different base types)
expected unsigned short [usertype] top
got restricted __le16 [usertype]
...
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-5-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move from 2*NUM_QUEUES dma_alloc_coherent() for DMA descriptor rings to
2 calls overall.
Issue is with how all queues share the same register for configuring the
upper 32-bits of Tx/Rx descriptor rings. Taking Tx, notice how TBQPH
does *not* depend on the queue index:
#define GEM_TBQP(hw_q) (0x0440 + ((hw_q) << 2))
#define GEM_TBQPH(hw_q) (0x04C8)
queue_writel(queue, TBQP, lower_32_bits(queue->tx_ring_dma));
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
if (bp->hw_dma_cap & HW_DMA_CAP_64B)
queue_writel(queue, TBQPH, upper_32_bits(queue->tx_ring_dma));
#endif
To maximise our chances of getting valid DMA addresses, we do a single
dma_alloc_coherent() across queues. This improves the odds because
alloc_pages() guarantees natural alignment. Other codepaths (IOMMU or
dev/arch dma_map_ops) don't give high enough guarantees
(even page-aligned isn't enough).
Two consideration:
- dma_alloc_coherent() gives us page alignment. Here we remove this
constraint meaning each queue's ring won't be page-aligned anymore.
- This can save some tiny amounts of memory. Fewer allocations means
(1) less overhead (constant cost per alloc) and (2) less wasted bytes
due to alignment constraints.
Example for (2): 4 queues, default ring size (512), 64-bit DMA
descriptors, 16K pages:
- Before: 8 allocs of 8K, each rounded to 16K => 64K wasted.
- After: 2 allocs of 32K => 0K wasted.
Fixes: 02c958dd3446 ("net/macb: add TX multiqueue support for gem")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sam9x75
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-4-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tx/rx ring size calculation is somewhat complex and partially hidden
behind a macro. Move that out of the {RX,TX}_RING_BYTES() macros and
macb_{alloc,free}_consistent() functions into neat separate functions.
In macb_free_consistent(), we drop the size variable and directly call
the size helpers in the arguments list. In macb_alloc_consistent(), we
keep the size variable that is used by netdev_dbg() calls.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-3-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MACB driver acts as if TBQPH/RBQPH are configurable on a per queue
basis; this is a lie. A single register configures the upper 32 bits of
each DMA descriptor buffers for all queues.
Concrete actions:
- Drop GEM_TBQPH/GEM_RBQPH macros which have a queue index argument.
Only use MACB_TBQPH/MACB_RBQPH constants.
- Drop struct macb_queue->TBQPH/RBQPH fields.
- In macb_init_buffers(): do a single write to TBQPH and RBQPH for all
queues instead of a write per queue.
- In macb_tx_error_task(): drop the write to TBQPH.
- In macb_alloc_consistent(): if allocations give different upper
32-bits, fail. Previously, it would have lead to silent memory
corruption as queues would have used the upper 32 bits of the alloc
from queue 0 and their own low 32 bits.
- In macb_suspend(): if we use the tie off descriptor for suspend, do
the write once for all queues instead of once per queue.
Fixes: fff8019a08b6 ("net: macb: Add 64 bit addressing support for GEM")
Fixes: ae1f2a56d273 ("net: macb: Added support for many RX queues")
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250923-macb-fixes-v6-2-772d655cdeb6@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch introduces support for retrieving hardware channel
configuration through the ethtool interface.
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250925125134.22421-3-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch introduces support for retrieving hardware channel
configuration through the ethtool interface.
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250925125134.22421-2-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit introduced the function lanphy_modify_page_reg which
as name suggests it, it modifies the registers. In the same commit we
have started to use this function inside the drivers. The problem is
that in the function lan8814_config_init we passed the wrong page number
when disabling the aneg towards host side. We passed extended page number
4(LAN8814_PAGE_COMMON_REGS) instead of extended page
5(LAN8814_PAGE_PORT_REGS)
Fixes: a0de636ed7a264 ("net: phy: micrel: Introduce lanphy_modify_page_reg")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250925064702.3906950-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The return value of copy_to_iter can't be negative, check whether the
copied length is equal to the requested length instead of checking for
negative values.
Cc: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Link: https://lore.kernel.org/all/20250910091739.2999-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 309bba39c945 ("vringh: iterate on iotlb_translate to handle large translations")
Link: https://patch.msgid.link/cd637504a6e3967954a9e80fc1b75e8c0978087b.1758723310.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce a NPU callback to initialize flow stats and remove NPU stats
initialization from airoha_npu_get routine. Add num_stats_entries to
airoha_npu_ppe_stats_setup routine.
This patch makes the code more readable since NPU statistic are now
initialized on demand by the NPU consumer (at the moment NPU statistic
are configured just by the airoha_eth driver).
Moreover this patch allows the NPU consumer (PPE module) to explicitly
enable/disable NPU flow stats.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250924-airoha-npu-init-stats-callback-v1-1-88bdf3c941b2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are reporting the lane count in the link settings but the flag is not
set to indicate that the driver supports lanes. Set the flag to report
lane count.
~]# ethtool eth0 | grep Lanes
Lanes: 2
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250924184445.2293325-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement some ethtool interfaces for obtaining the status of
Wangxun Virtual Function Ethernet.
Just like connection status, version information, queue depth and so on.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250924082140.41612-1-mengyuanlou@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for reporting RS-FEC histogram counters by reading them
from the RS_FEC_HISTOGRAM_GROUP in the PPCNT register.
Co-developed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Link: https://patch.msgid.link/20250924124037.1508846-5-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce support for querying the Ports Phy Histogram Configuration
Register (PPHCR) to retrieve RS-FEC histogram bin ranges. The ranges
are stored in a static array and will be used to map histogram counters
to error levels.
The actual RS-FEC histogram statistics are not yet reported in this
commit and will be handled in a downstream patch.
Co-developed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250924124037.1508846-4-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update mlx5e_stats_fec_get() to check the active FEC mode and skip
statistics collection when FEC is disabled.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250924124037.1508846-3-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024
clarifies it a bit further. Implement reporting interface through as
addition to FEC stats available in ethtool. Drivers can leave bin
counter uninitialized if per-lane values are provided. In this case the
core will recalculate summ for the bin.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
list_first_entry() never returns NULL — if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
The calls to list_first_entry() are always guarded by !list_empty(),
which guarantees a valid entry is returned. Therefore, the additional
`if (!p_buffer) break;` checks in qed_ooo_release_connection_isles(),
qed_ooo_release_all_isles(), and qed_ooo_free() are redundant and
unreachable.
Remove the dead code for clarity and consistency with common list
handling patterns in the kernel. No functional change intended.
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://patch.msgid.link/20250924030219.1252773-1-zhen.ni@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported WARNING in max_vclocks_store.
This occurs when the argument max is too large for kcalloc to handle.
Extend the guard to guard against values that are too large for
kcalloc
Reported-by: syzbot+94d20db923b9f51be0df@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=94d20db923b9f51be0df
Tested-by: syzbot+94d20db923b9f51be0df@syzkaller.appspotmail.com
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20250925155908.5034-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The zl3073x_devlink_flash_prepare() function calls zl3073x_fw_free() and
the caller, zl3073x_devlink_flash_update(), also calls that same free
function so it leads to a double free. Delete the extra free.
Fixes: a1e891fe4ae8 ("dpll: zl3073x: Implement devlink flash callback")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/aNVDbcIQq4RmU_fl@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
idpf: add XSk support
Alexander Lobakin says:
Add support for XSk xmit and receive using libeth_xdp.
This includes adding interfaces to reconfigure/enable/disable only
a particular set of queues and support for checksum offload XSk Tx
metadata.
libeth_xdp's implementation mostly matches the one of ice: batched
allocations and sending, unrolled descriptor writes etc. But unlike
other Intel drivers, XSk wakeup is implemented using CSD/IPI instead
of HW "software interrupt". In lots of different tests, this yielded
way better perf than SW interrupts, but also, this gives better
control over which CPU will handle the NAPI loop (SW interrupts are
a subject to irqbalance and stuff, while CSDs are strictly pinned
1:1 to the core of the same index).
Note that the header split is always disabled for XSk queues, as
for now we see no reasons to have it there.
XSk xmit perf is up to 3x comparing to ice. XSk XDP_PASS is also
faster a bunch as it uses system percpu page_pools, so that the
only overhead left is memcpy(). The rest is at least comparable.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: enable XSk features and ndo_xsk_wakeup
idpf: implement Rx path for AF_XDP
idpf: implement XSk xmit
idpf: add XSk pool initialization
idpf: add virtchnl functions to manage selected queues
====================
Link: https://patch.msgid.link/20250924175230.1290529-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lantiq PEF2256 framer has some little differences in behaviour
depending on its version.
Add a sysfs attribute to allow user applications to know the
version.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://patch.msgid.link/77a27941d6924b1009df0162ed9f0fa07ed6e431.1758726302.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported WARNING in rtl8150_start_xmit/usb_submit_urb.
This is the sequence of events that leads to the warning:
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb);
}
rtl8150_set_multicast() {
netif_stop_queue();
netif_wake_queue(); <-- wakes up TX queue before URB is done
}
rtl8150_start_xmit() {
netif_stop_queue();
usb_submit_urb(dev->tx_urb); <-- double submission
}
rtl8150_set_multicast being the ndo_set_rx_mode callback should not be
calling netif_stop_queue and notif_start_queue as these handle
TX queue synchronization.
The net core function dev_set_rx_mode handles the synchronization
for rtl8150_set_multicast making it safe to remove these locks.
Reported-and-tested-by: syzbot+78cae3f37c62ad092caa@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=78cae3f37c62ad092caa
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Link: https://patch.msgid.link/20250924134350.264597-1-viswanathiyyappan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a typo in this code. It should check "dibs_class" instead of
"&dibs_class". Remove the &.
Fixes: 804737349813 ("dibs: Create class dibs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/aNP-XcrjSUjZAu4a@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Semicolons after end of function braces are not needed, remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://patch.msgid.link/e6b57123f319c03b3f078981cb452be49e86253b.1758719832.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit wrongly indicates VF error in case of PF probing error.
Fixes: 99100d0d9922 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250924082755.1984798-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-09-25
this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.
The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.
Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.
Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.
4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.
Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.
Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.
The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.
* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
can: netlink: add userland error messages
can: dev: add can_get_ctrlmode_str()
can: calc_bittiming: make can_calc_tdco() FD agnostic
can: netlink: make can_tdc_fill_info() FD agnostic
can: netlink: add can_bitrate_const_fill_info()
can: netlink: add can_bittiming_const_fill_info()
can: netlink: add can_bittiming_fill_info()
can: netlink: add can_data_bittiming_get_size()
can: netlink: make can_tdc_get_size() FD agnostic
can: netlink: add can_ctrlmode_changelink()
can: netlink: add can_dtb_changelink()
can: netlink: make can_tdc_changelink() FD agnostic
can: netlink: remove useless check in can_tdc_changelink()
can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
can: netlink: add can_validate_databittiming()
can: netlink: add can_validate_tdc()
can: netlink: refactor can_validate_bittiming()
can: netlink: document which symbols are FD specific
can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
can: dev: move struct data_bittiming_params to linux/can/bittiming.h
...
====================
Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a bit more things, including pull requests from drivers:
- mt76: MLO support, HW restart improvements
- rtw88/89: small features, prep for RTL8922DE support
- ath10k: GTK rekey fixes
- cfg80211/mac80211:
- additions for more NAN support
- S1G channel representation cleanup
* tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (167 commits)
wifi: libertas: add WQ_UNBOUND to alloc_workqueue users
Revert "wifi: libertas: WQ_PERCPU added to alloc_workqueue users"
wifi: libertas: WQ_PERCPU added to alloc_workqueue users
wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid()
wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again
wifi: ath12k: enforce CPU endian format for all QMI data
wifi: ath12k: Use 1KB Cache Flush Command for QoS TID Descriptors
wifi: ath12k: Fix flush cache failure during RX queue update
wifi: ath12k: Add Retry Mechanism for REO RX Queue Update Failures
wifi: ath12k: Refactor REO command to use ath12k_dp_rx_tid_rxq
wifi: ath12k: Refactor RX TID buffer cleanup into helper function
wifi: ath12k: Refactor RX TID deletion handling into helper function
wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256
wifi: cfg80211: remove IEEE80211_CHAN_{1,2,4,8,16}MHZ flags
wifi: rtw89: avoid circular locking dependency in ser_state_run()
wifi: rtw89: fix leak in rtw89_core_send_nullfunc()
wifi: rtw89: avoid possible TX wait initialization race
wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
wifi: mac80211: fix Rx packet handling when pubsta information is not available
...
====================
Link: https://patch.msgid.link/20250925232341.4544-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some hosts support 16 lanes of PCIe. Make num-lanes accept that number.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250926-topic-pcie_16ln-v1-1-c249acc18790@oss.qualcomm.com
|
|
Removing a PCI devices requires holding pci_rescan_remove_lock. Prompted by
this being missed in sriov_disable() and going unnoticed since its
inception, add a lockdep assert so this doesn't get missed again in the
future.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Link: https://patch.msgid.link/20250826-pci_fix_sriov_disable-v1-2-2d0bc938f2a3@linux.ibm.com
|
|
Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.
Since commit 9d16947b7583 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d150fc
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.
On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:
PSW: 0704c00180000000 0000000c914e4b38 (klist_put+56)
GPRS: 000003800313fb48 0000000000000000 0000000100000001 0000000000000001
00000000f9b520a8 0000000000000000 0000000000002fbd 00000000f4cc9480
0000000000000001 0000000000000000 0000000000000000 0000000180692828
00000000818e8000 000003800313fe2c 000003800313fb20 000003800313fad8
#0 [3800313fb20] device_del at c9158ad5c
#1 [3800313fb88] pci_remove_bus_device at c915105ba
#2 [3800313fbd0] pci_iov_remove_virtfn at c9152f198
#3 [3800313fc28] zpci_iov_remove_virtfn at c90fb67c0
#4 [3800313fc60] zpci_bus_remove_device at c90fb6104
#5 [3800313fca0] __zpci_event_availability at c90fb3dca
#6 [3800313fd08] chsc_process_sei_nt0 at c918fe4a2
#7 [3800313fd60] crw_collect_info at c91905822
#8 [3800313fe10] kthread at c90feb390
#9 [3800313fe68] __ret_from_fork at c90f6aa64
#10 [3800313fe98] ret_from_fork at c9194f3f2.
This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.
Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.
Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.
Fixes: 18f9e9d150fc ("PCI/IOV: Factor out sriov_add_vfs()")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250826-pci_fix_sriov_disable-v1-1-2d0bc938f2a3@linux.ibm.com
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of thermal drivers for 6.18-rc1 from Daniel Lezcano:
"- Add the QCS615 compatible DT bindings for QCom platforms (Gaurav
Kohli)
- Support fallback trimming values when the fuse is empty in the R-Car
driver (Marek Vasut)
- Remove unneeded semicolon in the Mediatek LVTS driver (Jiapeng
Chong)
- Fix the LMH Kconfig option by selecting QCOM_SCM and take the
opportunity to add the COMPILE_TEST option for the QCom's LMH
feature (Dmitry Baryshkov)
- Fix the missing includes and incorrect error message in the Qcom's
LMH driver (Dmitry Baryshkov)
- Fix comment typo and add the documentation in the Kconfig for the
R-Car Gen3 and Gen4 (Marek Vasut)
- Add Tegra114 SOCTHERM support (Svyatoslav Ryhel)
- Rename the functions name in the driver to be consistent and generic
with the different R-Car platform variants (Wolfram Sang)
- Register the TI K3 J72xx bandgap sensor as a hwmon sensor too
(Michael Walle)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3S SoC (Claudiu Beznea)
- Support the GRF in the Rockchip driver (Sebastian Reichel)
- Add a temperature IIO sensor channel in the generic thermal ADC
driver (Svyatoslav Ryhel)
- Document the temperature sensor on the QCOM's Glymur platform (Manaf
Meethalavalappu)
- Add and document the thermal sensor unit reporting the junction
temperature of the RZ/G3E SoC (John Madieu)"
* tag 'thermal-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (24 commits)
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
thermal/drivers/qcom: Make LMH select QCOM_SCM
...
|
|
Merge an adjustment of the new Power Slider interface in the int340x
thermal driver.
* thermal-intel:
thermal: intel: int340x: Power Slider: Validate slider_balance range
|
|
Using the coccinelle test introduced in previous commit
(scripts/coccinelle/misc/ptr_err_to_pe.cocci), convert error logging
throughout the mlx5 driver to use the %pe format specifier instead of
PTR_ERR() with integer format specifiers.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1758192227-701925-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- mediatek: Make sure MT8195 AUDIO power domain isn't left powered-on
* tag 'pmdomain-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: set default off flag for MT8195 AUDIO power domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New HW Supoort
- amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD
- dell: Set USTT mode according to BIOS after reboot
- dell-lis3lv02d: Add Latitude E6530
- lg-laptop: Fix setting the fan mode"
* tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: Fix WMAB call in fan_mode_store()
platform/x86: dell-lis3lv02d: Add Latitude E6530
platform/x86/dell: Set USTT mode according to BIOS after reboot
platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- allow looking up GPIOs by the secondary firmware node too
- fix memory leak in gpio-regmap
* tag 'gpio-fixes-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: regmap: fix memory leak of gpio_regmap structure
gpiolib: Extend software-node support to support secondary software-nodes
|
