summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2021-10-21serial: imx: disable console clocks on unregisterFrancesco Dolcini
During console setup imx_uart_console_setup() enables clocks, but they are never disabled when the console is unregistered, this leads to clk_prepare_enable() being called multiple times without a matching clk_disable_unprepare() in case of console unregister. Ensure that clock enable/disable are balanced adding clk_disable_unprepare() in the console exit callback. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20211020192643.476895-3-francesco.dolcini@toradex.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-21serial: imx: fix detach/attach of serial consoleStefan Agner
If the device used as a serial console gets detached/attached at runtime, register_console() will try to call imx_uart_setup_console(), but this is not possible since it is marked as __init. For instance # cat /sys/devices/virtual/tty/console/active tty1 ttymxc0 # echo -n N > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console # echo -n Y > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console [ 73.166649] 8<--- cut here --- [ 73.167005] Unable to handle kernel paging request at virtual address c154d928 [ 73.167601] pgd = 55433e84 [ 73.167875] [c154d928] *pgd=8141941e(bad) [ 73.168304] Internal error: Oops: 8000000d [#1] SMP ARM [ 73.168429] Modules linked in: [ 73.168522] CPU: 0 PID: 536 Comm: sh Not tainted 5.15.0-rc6-00056-g3968ddcf05fb #3 [ 73.168675] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 73.168791] PC is at imx_uart_console_setup+0x0/0x238 [ 73.168927] LR is at try_enable_new_console+0x98/0x124 [ 73.169056] pc : [<c154d928>] lr : [<c0196f44>] psr: a0000013 [ 73.169178] sp : c2ef5e70 ip : 00000000 fp : 00000000 [ 73.169281] r10: 00000000 r9 : c02cf970 r8 : 00000000 [ 73.169389] r7 : 00000001 r6 : 00000001 r5 : c1760164 r4 : c1e0fb08 [ 73.169512] r3 : c154d928 r2 : 00000000 r1 : efffcbd1 r0 : c1760164 [ 73.169641] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 73.169782] Control: 10c5387d Table: 8345406a DAC: 00000051 [ 73.169895] Register r0 information: non-slab/vmalloc memory [ 73.170032] Register r1 information: non-slab/vmalloc memory [ 73.170158] Register r2 information: NULL pointer [ 73.170273] Register r3 information: non-slab/vmalloc memory [ 73.170397] Register r4 information: non-slab/vmalloc memory [ 73.170521] Register r5 information: non-slab/vmalloc memory [ 73.170647] Register r6 information: non-paged memory [ 73.170771] Register r7 information: non-paged memory [ 73.170892] Register r8 information: NULL pointer [ 73.171009] Register r9 information: non-slab/vmalloc memory [ 73.171142] Register r10 information: NULL pointer [ 73.171259] Register r11 information: NULL pointer [ 73.171375] Register r12 information: NULL pointer [ 73.171494] Process sh (pid: 536, stack limit = 0xcd1ba82f) [ 73.171621] Stack: (0xc2ef5e70 to 0xc2ef6000) [ 73.171731] 5e60: ???????? ???????? ???????? ???????? [ 73.171899] 5e80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172059] 5ea0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172217] 5ec0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172377] 5ee0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172537] 5f00: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172698] 5f20: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172856] 5f40: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173016] 5f60: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173177] 5f80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173336] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173496] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173654] 5fe0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173826] [<c0196f44>] (try_enable_new_console) from [<c01984a8>] (register_console+0x10c/0x2ec) [ 73.174053] [<c01984a8>] (register_console) from [<c06e2c90>] (console_store+0x14c/0x168) [ 73.174262] [<c06e2c90>] (console_store) from [<c0383718>] (kernfs_fop_write_iter+0x110/0x1cc) [ 73.174470] [<c0383718>] (kernfs_fop_write_iter) from [<c02cf5f4>] (vfs_write+0x31c/0x548) [ 73.174679] [<c02cf5f4>] (vfs_write) from [<c02cf970>] (ksys_write+0x60/0xec) [ 73.174863] [<c02cf970>] (ksys_write) from [<c0100080>] (ret_fast_syscall+0x0/0x1c) [ 73.175052] Exception stack(0xc2ef5fa8 to 0xc2ef5ff0) [ 73.175167] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? [ 73.175327] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.175486] 5fe0: ???????? ???????? ???????? ???????? [ 73.175608] Code: 00000000 00000000 00000000 00000000 (00000000) [ 73.175744] ---[ end trace 9b75121265109bf1 ]--- A similar issue could be triggered by unbinding/binding the serial console device [*]. Drop __init so that imx_uart_setup_console() can be safely called at runtime. [*] https://lore.kernel.org/all/20181114174940.7865-3-stefan@agner.ch/ Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20211020192643.476895-2-francesco.dolcini@toradex.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18Merge 5.15-rc6 into tty-nextGreg Kroah-Hartman
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-13serial: sc16is7xx: Make sc16is7xx_remove() return voidUwe Kleine-König
Up to now sc16is7xx_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-19-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-13serial: max310x: Make max310x_remove() return voidUwe Kleine-König
Up to now max310x_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211012153945.2651412-18-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10serial: 8250_lpss: Enable PSE UART Auto Flow ControlAman Kumar
Add a call to the custom ->set_termios() which has implementation about changing the state of RTS and CTS. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Aman Kumar <aman.kumar@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005133026.21488-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10serial: 8250_lpss: Extract dw8250_do_set_termios() for common useAndy Shevchenko
Some of the code currently used in dw8250_set_termios(), byt_set_termios() may be reused by other methods in the future. Extract it to a common helper function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005133026.21488-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10serial: 8250_dw: Fix the trivial typo in the commentAndy Shevchenko
Fix the trivial typo in the comment: Premilinary --> Preliminary. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005134529.23256-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10serial: 8250_dw: Re-use temporary variable for of_nodeAndy Shevchenko
In couple of places we may re-use temporary variable instead of dereferencing it. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005134529.23256-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10serial: 8250_dw: Drop wrong use of ACPI_PTR()Andy Shevchenko
ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR(). Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support") Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10tty: serial: samsung: Improve naming for common macroSam Protsenko
Having "_USI" suffix in EXYNOS_COMMON_SERIAL_DRV_DATA_USI() macro is confusing. Rename it to just EXYNOS_COMMON_SERIAL_DRV_DATA() and provide USI registers availability for all Exynos variants instead. While at it, also convert .has_usi field type to bool, so its usage is more obvious. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211005095800.2165-1-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-10tty: serial: atmel: use macros instead of hardcoded valuesClaudiu Beznea
Use UART_PM_STATE_ON, UART_PM_STATE_OFF instead of hardcoded values. Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211007112014.2332019-1-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-07Revert "serial: 8250: Fix reporting real baudrate value in c_ospeed field"Johan Hovold
This reverts commit 32262e2e429cdb31f9e957e997d53458762931b7. The commit in question claims to determine the inverse of serial8250_get_divisor() but failed to notice that some drivers override the default implementation using a get_divisor() callback. This means that the computed line-speed values can be completely wrong and results in regular TCSETS requests failing (the incorrect values would also be passed to any overridden set_divisor() callback). Similarly, it also failed to honour the old (deprecated) ASYNC_SPD_FLAGS and would break applications relying on those when re-encoding the actual line speed. There are also at least two quirks, UART_BUG_QUOT and an OMAP1510 workaround, which were happily ignored and that are now broken. Finally, even if the offending commit were to be implemented correctly, this is a new feature and not something which should be backported to stable. Cc: Pali Rohár <pali@kernel.org> Fixes: 32262e2e429c ("serial: 8250: Fix reporting real baudrate value in c_ospeed field") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211007133146.28949-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05serial: 8250: allow disabling of Freescale 16550 compile testJohan Hovold
The SERIAL_8250_FSL option is used to enable a workaround for a break-detection erratum for Freescale 16550 UARTs in the 8250 driver and is currently also used to enable support for ACPI enumeration. It is enabled on PPC, ARM and ARM64 whenever 8250 console support is enabled (since the quirk is needed for sysrq handling). Commit b1442c55ce89 ("serial: 8250: extend compile-test coverage") enabled compile testing of the code in question but did not provide a means to disable the option when COMPILE_TEST is enabled. Add a conditional input prompt instead so that SERIAL_8250_FSL is no longer enabled by default when compile testing while continuing to always enable the quirk for platforms that may need it. Fixes: b1442c55ce89 ("serial: 8250: extend compile-test coverage") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210924141232.4419-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05serial: 8250: Fix reporting real baudrate value in c_ospeed fieldPali Rohár
In most cases it is not possible to set exact baudrate value to hardware. So fix reporting real baudrate value which was set to hardware via c_ospeed termios field. It can be retrieved by ioctl(TCGETS2) from userspace. Real baudrate value is calculated from chosen hardware divisor and base clock. It is implemented in a new function serial8250_compute_baud_rate() which is inverse of serial8250_get_divisor() function. With this change is fixed also UART timeout value (it is updated via uart_update_timeout() function), which is calculated from the now fixed baudrate value too. Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210927093704.19768-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05serial: core: Fix initializing and restoring termios speedPali Rohár
Since commit edc6afc54968 ("tty: switch to ktermios and new framework") termios speed is no longer stored only in c_cflag member but also in new additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag then termios speed is stored only in these new members. Therefore to correctly restore termios speed it is required to store also ispeed and ospeed members, not only cflag member. In case only cflag member with BOTHER flag is restored then functions tty_termios_baud_rate() and tty_termios_input_baud_rate() returns baudrate stored in c_ospeed / c_ispeed member, which is zero as it was not restored too. If reported baudrate is invalid (e.g. zero) then serial core functions report fallback baudrate value 9600. So it means that in this case original baudrate is lost and kernel changes it to value 9600. Simple reproducer of this issue is to boot kernel with following command line argument: "console=ttyXXX,86400" (where ttyXXX is the device name). For speed 86400 there is no Bnnn constant and therefore kernel has to represent this speed via BOTHER c_cflag. Which means that speed is stored only in c_ospeed and c_ispeed members, not in c_cflag anymore. If bootloader correctly configures serial device to speed 86400 then kernel prints boot log to early console at speed speed 86400 without any issue. But after kernel starts initializing real console device ttyXXX then speed is changed to fallback value 9600 because information about speed was lost. This patch fixes above issue by storing and restoring also ispeed and ospeed members, which are required for BOTHER flag. Fixes: edc6afc54968 ("[PATCH] tty: switch to ktermios and new framework") Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211002130900.9518-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05serial: sifive: set pointer to NULL rather than 0.Colin Ian King
Clean up the assignment of sifive_serial_console_ports[ssp->port.line], this is a pointer to a struct sifive_serial_port so the assignment should be a NULL rather than a integer 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210925224726.183360-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05tty: serial: samsung: describe driver in KConfigKrzysztof Kozlowski
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924133040.111706-1-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-27Merge 5.15-rc3 into tty-nextGreg Kroah-Hartman
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22serial: 8250: SERIAL_8250_EM should depend on ARCH_RENESASGeert Uytterhoeven
The Emma Mobile integrated serial port hardware is only present on Emma Mobile SoCs. Hence add a dependency on ARCH_RENESAS, to prevent asking the user about this driver when configuring a kernel without Renesas ARM32 SoC support. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/7b5a4bbf2f47b2c4c127817e8b1524a650795d97.1631710085.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22serial: 8250: remove duplicated BRI0A49 and BDP3336 entriesKrzysztof Kozlowski
BRI0A49 and BDP3336 are already on the list. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210916170859.138813-1-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22serial: 8250_fsl: Move fsl8250_data to ACPI sectionGeert Uytterhoeven
The fsl8250_data structure is only used by ACPI support. Hence move its definition to the driver's ACPI section. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e406730a5eab880448d6bb55fbce492d281034ef.1631710623.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14serial: mvebu-uart: fix driver's tx_empty callbackPali Rohár
Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <stable@vger.kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14serial: 8250: 8250_omap: Fix RX_LVL register offsetNishanth Menon
Commit b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") introduced fixup including a register read to RX_LVL, however, we should be using word offset than byte offset since our registers are on 4 byte boundary (port.regshift = 2) for 8250_omap. Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable <stable@vger.kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210903050550.29050-1-nm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14tty: serial: uartlite: Prevent changing fixed parametersSean Anderson
This device does not support changing baud, parity, data bits, stop bits, or detecting breaks. Disable "changing" these settings to prevent their termios from diverging from the actual state of the uart. In order to determine the correct parameters to enforce, we read the various new devicetree parameters to discover how the uart was configured when it was synthesized. The defaults match ulite_console_setup. xlnx,use-parity, xlnx,odd-parity, and xlnx,data-bits are optional since there were in-tree users (and presumably out-of-tree users) who did not set them. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20210826192154.3202269-5-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14serial: 8250_pci: Prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + size * count" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Len Baker <len.baker@gmx.com> Link: https://lore.kernel.org/r/20210905155728.11147-1-len.baker@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-02Merge tag 'for-5.15/parisc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: - Fix a kernel crash when a signal is delivered to bad userspace stack - Fix fall-through warnings in math-emu code - Increase size of gcc stack frame check - Switch coding from 'pci_' to 'dma_' API - Make struct parisc_driver::remove() return void - Some parisc related Makefile changes - Minor cleanups, e.g. change to octal permissions, fix macro collisions, fix PMD_ORDER collision, replace spaces with tabs * tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: math-emu: Fix fall-through warnings parisc: fix crash with signals and alloca parisc: Fix compile failure when building 64-bit kernel natively parisc: ccio-dma.c: Added tab instead of spaces parisc/parport_gsc: switch from 'pci_' to 'dma_' API parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild parisc: switch from 'pci_' to 'dma_' API parisc: Make struct parisc_driver::remove() return void parisc: remove unused arch/parisc/boot/install.sh and its phony target parisc: Rename PMD_ORDER to PMD_TABLE_ORDER parisc: math-emu: Avoid "fmt" macro collision parisc: Increase size of gcc stack frame check parisc: Replace symbolic permissions with octal permissions
2021-08-30parisc: Make struct parisc_driver::remove() return voidUwe Kleine-König
The caller of this function (parisc_driver_remove() in arch/parisc/kernel/drivers.c) ignores the return value, so better don't return any value at all to not wake wrong expectations in driver authors. The only function that could return a non-zero value before was ipmi_parisc_remove() which returns the return value of ipmi_si_remove_by_dev(). Make this function return void, too, as for all other callers the value is ignored, too. Also fold in a small checkpatch fix for: WARNING: Unnecessary space before function pointer arguments + void (*remove) (struct parisc_device *dev); Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-08-27tty: serial: uartlite: Use read_poll_timeout for a polling loopSean Anderson
read_poll_timeout was recently introduced, and can be used to simplify our console polling loop. This results in a slight reduction in code. early_uartlite_putc can't get the same treatment, because it can be called before udelay is set up. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20210826192549.3203071-1-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-27tty: serial: uartlite: Use constants in early_uartlite_putcSean Anderson
Use the constants defined at the beginning of this file instead of integer literals when accessing registers. This makes this code easier to read, and obviates the need for some explanatory comments. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20210826194323.3209227-1-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26serial: vt8500: Use of_device_get_match_dataTang Bin
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210822032806.3256-4-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26serial: tegra: Use of_device_get_match_dataTang Bin
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210822032806.3256-3-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26serial: 8250_ingenic: Use of_device_get_match_dataTang Bin
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210822032806.3256-2-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: linflexuart: Remove redundant check to simplify the codeTang Bin
In the function uart_add_one_port(), it can return zero or non-zero, so remove redundant check to simplify the code. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210823110754.11232-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxpFugang Duan
Do software reset for communication port on imx7ulp and imx8qxp after the port is registered if the UART controller support the feature. Do partition reset with LPUART's power on, LPUART registers will keep the previous status, like on i.MX8QXP platform, which is not expected action, so need to set the RST bit of GLOBAL register to reset all uart internal logic and registers. Currently, only i.MX7ULP and i.MX8QXP LPUART controllers include global register that support the software reset. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210823091801.17447-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: fsl_lpuart: enable two stop bits for lpuart32Fugang Duan
Add two stop bits support. User can run the command to enable two stop bits for test: stty cstopb -F /dev/ttyLPx Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210823081733.31941-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: fsl_lpuart: fix the wrong mapbase valueAndy Duan
Register offset needs to be applied on mapbase also. dma_tx/rx_request use the physical address of UARTDATA. Register offset is currently only applied to membase (the corresponding virtual addr) but not on mapbase. Fixes: 24b1e5f0e83c ("tty: serial: lpuart: add imx7ulp support") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Adriana Reus <adriana.reus@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Andy Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20210819021033.32606-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-18tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callbackFugang Duan
There have a corner case that tx DMA .callback() is coming after .flush_buffer(), then .callback() should check dma_tx_in_progress flag and return in directly. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210817100203.21300-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16serial: sh-sci: fix break handling for sysrqUlrich Hecht
This fixes two issues that cause the sysrq sequence to be inadvertently aborted on SCIF serial consoles: - a NUL character remains in the RX queue after a break has been detected, which is then passed on to uart_handle_sysrq_char() - the break interrupt is handled twice on controllers with multiplexed ERI and BRI interrupts Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210816162201.28801-1-uli+renesas@fpond.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16serial: stm32: use devm_platform_get_and_ioremap_resource()Tang Bin
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210814131418.13608-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16serial: stm32: use the defined variable to simplify codeTang Bin
Use the defined variable 'dev' to make the code cleaner. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210814124951.30084-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16Revert "arm pl011 serial: support multi-irq request"Qian Cai
This reverts commit b0819465be8be0c76af15436a9e6db4dab4c196e which results in amba_device-specific code being called from sbsa_uart_startup() and sbsa_uart_shutdown(). Signed-off-by: Qian Cai <quic_qiancai@quicinc.com> Link: https://lore.kernel.org/r/20210813163135.205-1-quic_qiancai@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13tty: serial: samsung: Add Exynos850 SoC dataSam Protsenko
Add serial driver data for Exynos850 SoC. This driver data is basically reusing EXYNOS_COMMON_SERIAL_DRV_DATA, which is common for all Exynos chips, but also enables USI init, which was added in previous commit: "tty: serial: samsung: Init USI to keep clocks running". Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210811114827.27322-7-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13tty: serial: samsung: Fix driver data macros styleSam Protsenko
Make checkpatch happy by fixing this error: ERROR: Macros with complex values should be enclosed in parentheses Although this change is made to keep macros consistent with consequent patches (adding driver data for new SoC), it's intentionally added as a separate patch to ease possible porting efforts in future. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210811114827.27322-6-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13tty: serial: samsung: Init USI to keep clocks runningSam Protsenko
UART block is a part of USI (Universal Serial Interface) IP-core in Samsung SoCs since Exynos9810 (e.g. in Exynos850). USI allows one to enable one of three types of serial interface: UART, SPI or I2C. That's possible because USI shares almost all internal circuits within each protocol. USI also provides some additional registers so it's possible to configure it. One USI register called USI_OPTION has reset value of 0x0. Because of this the clock gating behavior is controlled by hardware (HWACG = Hardware Auto Clock Gating), which simply means the serial won't work after reset as is. In order to make it work, USI_OPTION[2:1] bits must be set to 0b01, so that HWACG is controlled manually (by software). Bits meaning: - CLKREQ_ON = 1: clock is continuously provided to IP - CLKSTOP_ON = 0: drive IP_CLKREQ to High (needs to be set along with CLKREQ_ON = 1) USI is not present on older chips, like s3c2410, s3c2412, s3c2440, s3c6400, s5pv210, exynos5433, exynos4210. So the new boolean field '.has_usi' was added to struct s3c24xx_uart_info. USI registers will be only actually accessed when '.has_usi' field is set to "1". This feature is needed for further serial enablement on Exynos850, but some other new Exynos chips (like Exynos9810) may benefit from this feature as well. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210811114827.27322-5-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13serial: stm32: fix the conditional expression writingTang Bin
In the function stm32_usart_init_port, intent of the code maybe when irq returns a value of zero, the return should be '-ENODEV'. But the conditional expression '? :' maybe clerical error, it should be '?:' to make '-ENODEV' work. But in fact, as the example in platform.c is * int irq = platform_get_irq(pdev, 0); * if (irq < 0) * return irq; So the return value of zero is unnecessary to check, at last remove the unnecessary '?: -ENODEV'. Co-developed-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210811105136.25392-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-09Merge 5.14-rc5 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05serial: 8250_omap: Handle optional overrun-throttle-ms propertyTony Lindgren
Handle optional overrun-throttle-ms property as done for 8250_fsl in commit 6d7f677a2afa ("serial: 8250: Rate limit serial port rx interrupts during input overruns"). This can be used to rate limit the UART interrupts on noisy lines that end up producing messages like the following: ttyS ttyS2: 4 input overrun(s) At least on droid4, the multiplexed USB and UART port is left to UART mode by the bootloader for a debug console, and if a USB charger is connected on boot, we get noise on the UART until the PMIC related drivers for PHY and charger are loaded. With this patch and overrun-throttle-ms = <500> we avoid the extra rx interrupts. Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210727103533.51547-2-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-30serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.Mario Kleiner
This attempts to fix a bug found with a serial port card which uses an MCS9922 chip, one of the 4 models for which MSI-X interrupts are currently supported. I don't possess such a card, and i'm not experienced with the serial subsystem, so this patch is based on what i think i found as a likely reason for failure, based on walking the user who actually owns the card through some diagnostic. The user who reported the problem finds the following in his dmesg output for the relevant ttyS4 and ttyS5: [ 0.580425] serial 0000:02:00.0: enabling device (0000 -> 0003) [ 0.601448] 0000:02:00.0: ttyS4 at I/O 0x3010 (irq = 125, base_baud = 115200) is a ST16650V2 [ 0.603089] serial 0000:02:00.1: enabling device (0000 -> 0003) [ 0.624119] 0000:02:00.1: ttyS5 at I/O 0x3000 (irq = 126, base_baud = 115200) is a ST16650V2 ... [ 6.323784] genirq: Flags mismatch irq 128. 00000080 (ttyS5) vs. 00000000 (xhci_hcd) [ 6.324128] genirq: Flags mismatch irq 128. 00000080 (ttyS5) vs. 00000000 (xhci_hcd) ... Output of setserial -a: /dev/ttyS4, Line 4, UART: 16650V2, Port: 0x3010, IRQ: 127 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test This suggests to me that the serial driver wants to register and share a MSI/MSI-X irq 128 with the xhci_hcd driver, whereas the xhci driver does not want to share the irq, as flags 0x00000080 (== IRQF_SHARED) from the serial port driver means to share the irq, and this mismatch ends in some failed irq init? With this setup, data reception works very unreliable, with dropped data, already at a transmission rate of only a 16 Bytes chunk every 1/120th of a second, ie. 1920 Bytes/sec, presumably due to rx fifo overflow due to mishandled or not used at all rx irq's? See full discussion thread with attempted diagnosis at: https://psychtoolbox.discourse.group/t/issues-with-iscan-serial-port-recording/3886 Disabling the use of MSI interrupts for the serial port pci card did fix the reliability problems. The user executed the following sequence of commands to achieve this: echo 0000:02:00.0 | sudo tee /sys/bus/pci/drivers/serial/unbind echo 0000:02:00.1 | sudo tee /sys/bus/pci/drivers/serial/unbind echo 0 | sudo tee /sys/bus/pci/devices/0000:02:00.0/msi_bus echo 0 | sudo tee /sys/bus/pci/devices/0000:02:00.1/msi_bus echo 0000:02:00.0 | sudo tee /sys/bus/pci/drivers/serial/bind echo 0000:02:00.1 | sudo tee /sys/bus/pci/drivers/serial/bind This resulted in the following log output: [ 82.179021] pci 0000:02:00.0: MSI/MSI-X disallowed for future drivers [ 87.003031] pci 0000:02:00.1: MSI/MSI-X disallowed for future drivers [ 98.537010] 0000:02:00.0: ttyS4 at I/O 0x3010 (irq = 17, base_baud = 115200) is a ST16650V2 [ 103.648124] 0000:02:00.1: ttyS5 at I/O 0x3000 (irq = 18, base_baud = 115200) is a ST16650V2 This patch attempts to fix the problem by disabling irq sharing when using MSI irq's. Note that all i know for sure is that disabling MSI irq's fixed the problem for the user, so this patch could be wrong and is untested. Please review with caution, keeping this in mind. Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support") Cc: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> Cc: stable <stable@vger.kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Link: https://lore.kernel.org/r/20210729043306.18528-1-mario.kleiner.de@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-29serial: 8250_mtk: fix uart corruption issue when rx power offZhiyong Tao
Fix uart corruption issue when rx power off. Add spin lock in mtk8250_dma_rx_complete function in APDMA mode. when uart is used as a communication port with external device(GPS). when external device(GPS) power off, the power of rx pin is also from 1.8v to 0v. Even if there is not any data in rx. But uart rx pin can capture the data "0". If uart don't receive any data in specified cycle, uart will generates BI(Break interrupt) interrupt. If external device(GPS) power off, we found that BI interrupt appeared continuously and very frequently. When uart interrupt type is BI, uart IRQ handler(8250 framwork API:serial8250_handle_irq) will push data to tty buffer. mtk8250_dma_rx_complete is a task of mtk_uart_apdma_rx_handler. mtk8250_dma_rx_complete priority is lower than uart irq handler(serial8250_handle_irq). if we are in process of mtk8250_dma_rx_complete, uart appear BI interrupt:1)serial8250_handle_irq will priority execution.2)it may cause write tty buffer conflict in mtk8250_dma_rx_complete. So the spin lock protect the rx receive data process is not break. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210729084640.17613-2-zhiyong.tao@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.3 (git 2.53.0) at 2026-10-25 04:15:34 +0000