| Age | Commit message (Collapse) | Author |
|---|
|
Reorder const qualifier in array declaration.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250619084420.146151-3-thomas.andreatta2000@gmail.com
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Checkpatch fix: deleted `dev_dbg()` printing the name of the function.
ftrace can be used instead.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250619084420.146151-2-thomas.andreatta2000@gmail.com
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The g_skip_frames sensor-op is obsolete, drop it.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-23-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
On raw camera sensors the framerate is controlled through vblank
(and optional) hblank controls.
Having a get_frame_interval makes no sense in this case, drop it.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-22-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The i2c-client's power-domain has already been powered up when probe()
gets called. So e.g. ACPI resources for regulators and clks have
already been enabled and only the GPIOs need to be set to the on state.
Instead of calling pm_runtime_set_suspended() while the domain is
already powered up and then have detect() do a pm_runtime_get()
to set the GPIOs do the following:
1. Call gc0310_power_on() to only set the GPIOs
2. Set the device's runtime-PM state to active instead of suspended
3. Avoid the device getting suspended as soon as pm_runtime_enable()
gets called by calling pm_runtime_get() before _enable(), this means
moving the pm_runtime_get() / _put() from detect() to probe ()
This fixes power_on() not getting called when runtime-PM is not
enabled in the Kconfig and this keeps the sensor powered-up while
registering it avoiding unnecessary power cycles.
Also modify gc0310_remove() to power-off the device if it is in
active state when gc0310_remove() runs.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-21-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Move the suspend()/resume() functions to above gc0310_detect() and rename
the functions to power_off()/power_on().
No functional changes, this is a preparation patch for reworking
the runtime-pm handling in probe() and remove().
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-20-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Stop having a v4l2_mbus_framefmt mode.fmt driver-data member to store
the fmt for the active-state, instead use sd.active_state fmt.
This also removes the need for gc0310_get_pad_format() since
v4l2_subdev_state_get_format() now will return the correct
v4l2_mbus_framefmt for all whence values.
Instead of switching gc0310_set_fmt() from gc0310_get_pad_format() to
v4l2_subdev_state_get_format() just drop it entirely since there is only
1 fixed mode. Otherwise the new gc0310_set_fmt() would be 100% the same
as v4l2_subdev_get_fmt() after this.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-19-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
v4l2_subdev_pad_ops.get_fmt()
Now that the sd-state's fmt is properly initialized by
internal_ops.init_state(), the driver can be safely switched
to v4l2_subdev_get_fmt().
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-18-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Implement internal_ops.init_state to fill in the v4l2_mbus_framefmt
struct in newly allocated sd-state structs.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-17-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Switch to using the sub-device state lock and properly call
v4l2_subdev_init_finalize() / v4l2_subdev_cleanup() on probe() /
remove().
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-16-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Switch from s_stream() to enable_streams() and disable_streams() pad
operations. They are preferred and required for streams support.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-15-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
is_streaming is only set and never read, drop it.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-14-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Reduce the unnecessary long msleep(100) done on stream start to 10 ms and
move this to gc0310_resume() so that it is also done on the initial
power-up done by gc0310_detect(), which should fix gc0310_detect()
sometimes failing.
While at it switch the sleeps from msleep() / usleep_range() to fsleep().
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-13-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add a check_hwcfg() function to check if the external clk-freq, CSI
link-freq and lane-count match the driver's expectations.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-12-hansg@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When an exposure value > (mode-height + vblank) gets set the sensor will
automatically increase vblank, lowering the framerate.
This is not desirable, limit exposure the maximum exposure to mode-height +
vblank to avoid the unwanted framerate slowdown.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-11-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add camera orientation and sensor rotation controls using
the v4l2_fwnode_device_parse() and v4l2_ctrl_new_fwnode_properties()
helpers.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-10-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the vblank and hblank controls, these controls
are mandatory for using the sensor driver with libcamera.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-9-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the pixelrate control as expected by libcamera,
while at it also add the link-frequency control.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-8-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the selection API as expected by libcamera.
Note the driver only supports a single fixed resolution and
no cropping, so this is a simple read-only implementation.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-7-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use V4L2_CID_ANALOGUE_GAIN for gain control, as expected by userspace.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-6-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Switch the GC0310 driver over to the CCI register access helpers.
While at it also add a _REG prefix to all register address defines
to make clear they are register addresses and group register value
defines together with the address definition.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-5-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently the sensor is running 30.9 fps, increase vblank
to have it actually run at 30.0 fps.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-4-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Drop the unused GC0310_FOCAL_LENGTH_NUM define, the focal-length
is a property of the sensor-module, not of the raw sensor itself.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-3-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Many functions on the gc0310 driver use a function local variable called
"dev" but these variable's type is not "struct device *" type as one would
expect based on the name. Instead they point to the gc0310 driver data
struct.
Rename these variables to sensor to make their purpose more clear.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250517114106.43494-2-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fix a coding style:
"ERROR: that open brace { should be on the previous line"
issue reported in ia_css_vf.host.c:94.
Signed-off-by: Pablo <pablo@pablo.ct.ws>
Link: https://lore.kernel.org/r/20250503200030.5982-1-pablo@pablo.ct.ws
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace the duplicate code for calling the special Intel camera sensor GPIO
type _DSM (79234640-9e10-4fea-a5c1-b5aa8b19756f) and mapping GPIOs to
the sensor with a call to int3472_discrete_parse_crs() from the int3472
driver.
Besides avoiding code duplication the int3472 version of the code also
supports more features, like mapping the powerdown GPIO to a regulator on
the mt9m114 which is necessary to make the camera on the Asus T100TA work.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250507184737.154747-7-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Commit c7194b21809e ("media: atomisp: On streamoff wait for buffers owned
by the CSS to be given back") added draining of the CSS buffer queue to
the beginning of atomisp_stop_stream().
But it turns out that when telling the CSS to stop streaming it needs at
least 1 buffer queued, because the CSS firmware waits for a frame to be
completed before stopping and without buffers it cannot complete a frame.
At the end of atomisp_stop_stream() it is always safe to return buffer
ownership to the videobuf2-core. Either atomisp_css_stop() has successfully
stopped the stream; or the atomisp_reset() later on which power-cycles
the ISP will definitely have stopped the stream.
Drop the draining of the CSS buffer queue to fix the "stop stream timeout."
error and move the atomisp_flush_video_pipe() call after atomisp_reset(),
passing false for the warn_on_css_frames flag since some buffers still
being marked as owned by the CSS expected on stream off.
Also increase the timeout in destroy_stream(), since this waits for
the last frame to be completed this can take longer then 40 ms. When e.g.
using a framerate of 15 fps, this could take 66ms, make the timeout 200 ms
to be on the safe side.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250505210008.152659-6-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The atomisp interrupt handling will free the MIPI / CSI-receiver buffers
when processing a frame-completion event if the stop_requested flag is set,
but only in the ISP2400 / BYT, not in the ISP2401 / CHT case.
There are 2 problems with this:
1. Since this is only done in the BYT case the "mipi frames are not freed."
warning always triggers on CHT devices.
2. There are 2 stop_requested flags, ia_css_pipe.stop_requested and
ia_css_pipeline.stop_requested. The ISR checks the ia_css_pipe flag,
but atomisp_css_stop() sets the ia_css_pipeline.stop_requested flag.
So even on BYT freeing the buffers from the ISR never happens.
This likely is a good thing since the buffers get freed on the first
frame completion event and there might be multiple frames queued up.
Fix things by completely dropping the freeing of the MIPI buffers from
the ISR as well as the stop_requested flag always freeing the buffers
from ia_css_uninit().
Also drop the warning since this now always is expected behavior.
Note that ia_css_uninit() get called whenever streaming is stopped
through atomisp_stop_stream() calling atomisp_reset() so the buffers
are still freed whenever streaming is stopped.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250505210008.152659-5-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
atomisp_start_streaming() starts the media pipeline before calling
atomisp_css_start(). On atomisp_css_start() failures stop the pipeline
before returning the error.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250505210008.152659-4-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When v4l2_subdev_call(sensor, s_stream, 1) fails atomisp_start_streaming()
was not properly returning the buffer ownership back to the videobuf2-core
code, resulting in:
[ 1318.153447] ------------[ cut here ]------------
[ 1318.153499] WARNING: CPU: 0 PID: 4856 at drivers/media/common/videobuf2/videobuf2-core.c:1803 vb2_start_streaming+0xcb/0x160 [videobuf2_common]
...
[ 1318.154551] Call Trace:
[ 1318.154560] <TASK>
[ 1318.154571] ? __warn.cold+0xb7/0x14a
[ 1318.154591] ? vb2_start_streaming+0xcb/0x160 [videobuf2_common]
[ 1318.154617] ? report_bug+0xe0/0x180
[ 1318.154640] ? handle_bug+0x5e/0xa0
[ 1318.154652] ? exc_invalid_op+0x14/0x70
[ 1318.154665] ? asm_exc_invalid_op+0x16/0x20
[ 1318.154697] ? vb2_start_streaming+0xcb/0x160 [videobuf2_common]
[ 1318.154723] ? vb2_start_streaming+0x70/0x160 [videobuf2_common]
[ 1318.154748] vb2_core_streamon+0xa2/0x100 [videobuf2_common]
The sensor streamon call is the last thing that atomisp_start_streaming()
does and it was failing to undo all of the previous steps in general.
Refactor atomisp_stop_streaming() into an atomisp_stop_stream() helper and
call that on sensor streamon failure to properly clean things up.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250505210008.152659-3-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Move atomisp_stop_streaming() above atomisp_start_streaming(), this is
a preparation patch for making atomisp_start_streaming() properly cleanup
if starting the sensor stream fails.
No functional change, only moving a block of code up.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250505210008.152659-2-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This driver is intended for IPU7 at the moment so drop the IPU8 PCI ID.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc5).
No conflicts.
No adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Kconfig and Makefile for IPU7 driver and also update
the Makefile to build the IPU7 driver.
Also add a to-do file to list the TODOs.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The main input system driver mainly cover the basic hardware setup, v4l2
devices registration, firmware stream interfaces and interrupt handling.
Input system CSI2 receiver is exposed as a v4l2 sub-device. Each CSI2
sub-device represent one single CSI2 hardware port which be linked with
external sub-device such camera sensor by linked with ISYS CSI2's sink
pad. The CSI2 source pad is linked to the sink pad of video capture device.
Register V4L2 video device and setup the VB2 queues to support video
capture. Video streaming callback will trigger the input system driver to
construct a input system stream configuration for firmware based on data
type and stream ID and then queue buffers to firmware to do capture.
IPU7 CSI-2 D-PHY hardware is a Synopsys DWC MIPI CSI2 Rx IP, the driver
program the DPHY to receive MIPI data from camera sensors.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
IPU7 firmware defines the ABIs between firmware and software, this
patch adds a series of ABI headers.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
IPU7 irmware is generated and released as signed Code Partition
Directory (CPD) format file which is aligned with the SPI flash code
partition definition. The driver parses the CPD based on the layout.
Syscom is an inter-process(or) communication mechanism between an IPU and
host. Syscom uses message queues for message exchange between IPU and
host. Each message queue has its consumer and producer, host queue
messages to firmware as the producer and then firmware to dequeue the
messages as consumer and vice versa. IPU and host use shared registers or
memory to reside the read and write indices which are updated by consumer
and producer.
IPU7 firmware defined its boot sequence, driver setup the boot
configuration and program the boot parameters to start and run
the firmware.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The Intel IPU7 has internal microprocessor which runs the firmware
The microprocessor accesses system DRAM by its internal 32-bit virtual
address space. Driver should setup the MMU table and expose the DMA
APIs for memory buffer mapping.
This patch adds the IPU MMU and a DMA mapping implementation to setup
the internal MMU hardware.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Intel Image Processing Unit 7th Gen includes input and processing systems
and the hardware presents itself as a single PCI device in system same
as IPU6.
The IPU7 PCI device driver basically does PCI configurations, basic
hardware configuration by its buttress interfaces, loads the
firmware binary, register the auxiliary device which serve for the ISYS
device driver.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
After commit 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref
struct"), fb_deferred_io_init() allocates memory for info->pagerefs as
well as return an error code on failure. However the error code is
ignored here and the memory allocated could leak because of not calling
fb_deferred_io_cleanup() on the error path.
Fix them by adding the cleanup function on the error path, and handling
the error code returned by fb_deferred_io_init().
Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/fd2be49cfef72799f17a96d01a4c6b92770cda7d.1751207100.git.abdun.nihaal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Both wifi_regd.c and ioctl_cfg80211.c define a static function
rtw_ieee80211_channel_to_frequency() with identical functionality.
Remove the function from wifi_regd.c and make it non-static in
ioctl_cfg80211.c to avoid code duplication.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function rtw_ieee80211_channel_to_frequency() in ioctl_cfg80211.c
is always called with band = NL80211_BAND_2GHZ. Remove the unnecessary
band parameter from the function and adjust its code and calls.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parameter 'band' of rtw_ieee80211_channel_to_frequency() in
wifi_regd.c is unused, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250630083049.103734-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path.
Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250626172412.18355-1-abdun.nihaal@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions rtw_hal_dm_deinit(), odm_CmnInfoInit_Debug(), and
odm_BasicDbgMessage() are empty, hence we can remove them to get rid of
some dead code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250628142330.58045-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adhere to Linux kernel coding style.
Reported by checkpatch:
WARNING: Comparisons should place the constant on the right side of the
test
Signed-off-by: Bryant Boatright <bryant.boatright@proton.me>
Link: https://lore.kernel.org/r/aFrzy5UdqURaTrlP@ubuntu-desk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The introduction of a padding field in the gpib_board_info_ioctl is
showing up as initialized data on the stack frame being copyied back
to userspace in function board_info_ioctl. The simplest fix is to
initialize the entire struct to zero to ensure all unassigned padding
fields are zero'd before being copied back to userspace.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Fixes: 9dde4559e939 ("staging: gpib: Add GPIB common core driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250623220958.280424-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call a function based on sm750_dev->revid
instead of using this indirection
Signed-off-by: Kisub Choe <kisub.choe.0x1@gmail.com>
Link: https://lore.kernel.org/r/aFWSSAcboBVi4ROh@zinc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the staging fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
