summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2022-06-09phy: qcom-qmp-ufs: cleanup the driverDmitry Baryshkov
Remove the conditionals and options that are not used by any of UFS PHY devices. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-23-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie-msm8996: cleanup the driverDmitry Baryshkov
Remove the conditionals and options that are not used by the MSM8996 PCIe PHY device. Hardcode has_lane_rst and has_phy_com_ctrl as this is the case for this PHY. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-22-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie: cleanup the driverDmitry Baryshkov
Remove the conditionals and options that are not used by any of PCIe PHY devices. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-21-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: cleanup the driverDmitry Baryshkov
Remove the conditionals and options that are not used by any of combo USB+DP PHY devices. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-20-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-usb: drop support for non-USB PHY typesDmitry Baryshkov
Drop remaining support for PHY types other than USB. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-19-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-ufs: drop support for non-UFS PHY typesDmitry Baryshkov
Drop remaining support for PHY types other than UFS. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-18-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie-msm8996: drop support for non-PCIe PHY typesDmitry Baryshkov
Drop remaining support for PHY types other than PCIe. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-17-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie: drop support for non-PCIe PHY typesDmitry Baryshkov
Drop remaining support for PHY types other than PCIe. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-16-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: drop support for PCIe,UFS PHY typesDmitry Baryshkov
Drop remaining support for unused PHY types (PCIe, UFS). Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-15-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp: drop old QMP PHY driver sourceDmitry Baryshkov
As we have switched to the new (split) QMP PHY driver, drop the old monolithic QMP driver source. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-14-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp: switch to new split QMP PHY driverDmitry Baryshkov
Use new split QMP PHY driver and remove all monolith phy-qcom-qmp driver. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-13-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-usb: change symbol prefix to qcom_qmp_phy_usbDmitry Baryshkov
Change all symbol names to start with qcom_qmp_phy_usb_ rather than old qcom_qmp_phy_ Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-12-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-ufs: change symbol prefix to qcom_qmp_phy_ufsDmitry Baryshkov
Change all symbol names to start with qcom_qmp_phy_ufs_ rather than old qcom_qmp_phy_ Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-11-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie: change symbol prefix to qcom_qmp_phy_pcie_msm8996Dmitry Baryshkov
Change all symbol names to start with qcom_qmp_phy_pcie_msm8996_ rather than old qcom_qmp_phy_. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-10-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie: change symbol prefix to qcom_qmp_phy_pcieDmitry Baryshkov
Change all symbol names to start with qcom_qmp_phy_pcie_ rather than old qcom_qmp_phy_ Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-9-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: change symbol prefix to qcom_qmp_phy_comboDmitry Baryshkov
Change all symbol names to start with qcom_qmp_phy_combo_ rather than old qcom_qmp_phy_ Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-combo: drop all non-combo compatibles supportDmitry Baryshkov
Drop support for all non-USB+DP compatibles from the new qmp-combo driver. Currently this will result in duplication (both in terms of code and in terms of config tables) with USB PHY support. This will be sorted out later, after fixing the combo PHY init/reinit issues. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-usb: drop all non-USB compatibles supportDmitry Baryshkov
Drop support for all non-USB compatibles from the new qmp-usb driver. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-ufs: drop all non-UFS compatibles supportDmitry Baryshkov
Drop support for all non-UFS compatibles from the new qmp-ufs driver. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie-msm8996: drop all compatibles except msm8996-pcie-phyDmitry Baryshkov
Drop support for all compatibles from the new qmp-pcie driver except the qcom,msm8996-qmp-pcie-phy. This PHY differs from the rest of PCIe PHYs, so it warrants a separate device driver. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp-pcie: drop all non-PCIe compatibles supportDmitry Baryshkov
Drop support for all non-PCIe compatibles from the new qmp-pcie driver. The MSM8996 compat is also removed, it is going to be handled by a separate driver. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-09phy: qcom-qmp: create copies of QMP PHY driverDmitry Baryshkov
In order to split and cleanup the single monstrous QMP PHY driver, create blind copies of the current file. They will be used for: - PCIe (and a separate msm8996 PCIe PHY driver) - UFS - USB - Combo DP + USB Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220607213203.2819885-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-08phy: samsung: exynosautov9-ufs: correct TSRV register configurationsChanho Park
For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register configurations. So, it must be s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g Fixes: d64519249e1d ("phy: samsung-ufs: support exynosauto ufs phy driver") Signed-off-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220603050536.61957-1-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-08phy: samsung: ufs: support secondary ufs phyChanho Park
To support secondary ufs phy device, we need to get an offset for phy isolation from the syscon DT node. If the first index argument of the node is existing, we can read the offset value and set it as isol->offset. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220607072907.127000-6-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-08phy: samsung: ufs: remove drvdata from struct samsung_ufs_phyChanho Park
To change an offset of pmu_isol, we need to store its data instead of having drvdata's pointer. The definition of the pmu_isol structure should be extracted from samsung_ufs_phy_drvdata and rename the name with samsung_ufs_phy_ prefix. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220607072907.127000-5-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-08phy: samsung: ufs: constify samsung_ufs_phy_cfgChanho Park
Put const qualifier of samsung_ufs_phy_cfg pointer because they will not be changed from drvdata. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220607072907.127000-4-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-06-08phy: samsung: ufs: rename cfg to cfgs for clarificationChanho Park
Rename **cfg to **cfgs to clarify the naming. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220607072907.127000-3-chanho61.park@samsung.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-19Merge tag 'phy-for-5.19' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-work-next Vinod writes: phy-for-5.19 - New support: - LVDS configuration support and implementation in fsl driver - Qualcomm UFS phy support for SM6350 and USB PHY for SDX65 - Allwinner D-PHY Rx mode support - Yamilfy Mixel mipi-dsi-phy - Updates: - Documentation for phy ops order - Can transceiver mux support - Qualcomm QMP phy updates - Uniphier phy updates * tag 'phy-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits) phy: qcom-qmp: rename error labels phy: qcom-qmp: fix pipe-clock imbalance on power-on failure phy: qcom-qmp: switch to explicit reset helpers phy: qcom-qmp: fix reset-controller leak on probe errors phy: qcom-qmp: fix struct clk leak on probe errors dt-bindings: phy: renesas,usb2-phy: Document RZ/G2UL phy bindings dt-bindings: phy: marvell,armada-3700-utmi-host-phy: Fix incorrect compatible in example phy: qcom-qmp: fix phy-descriptor kernel-doc typo phy: rockchip-inno-usb2: Clean up some inconsistent indenting phy: freescale: imx8m-pcie: Handle IMX8_PCIE_REFCLK_PAD_UNUSED phy: core: Warn when phy_power_on is called before phy_init phy: core: Update documentation syntax phy: core: Add documentation of phy operation order phy: rockchip-inno-usb2: Handle ID IRQ phy: rockchip-inno-usb2: Handle bvalid falling phy: rockchip-inno-usb2: Support multi-bit mask properties phy: rockchip-inno-usb2: Do not lock in bvalid IRQ handler phy: rockchip-inno-usb2: Do not check bvalid twice phy: rockchip-inno-usb2: Fix muxed interrupt support phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2 ...
2022-05-03phy: qcom-qmp: rename error labelsJohan Hovold
Rename all error labels after what they are used for in order to improve readability and for consistency. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220502133130.4125-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-03phy: qcom-qmp: fix pipe-clock imbalance on power-on failureJohan Hovold
Make sure to disable the pipe clock also if ufs-reset deassertion fails during power on. Note that the ufs-reset is asserted in qcom_qmp_phy_com_exit(). Fixes: c9b589791fc1 ("phy: qcom: Utilize UFS reset controller") Cc: Evan Green <evgreen@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220502133130.4125-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-03phy: qcom-qmp: switch to explicit reset helpersJohan Hovold
Switch to consistently using the explicit reset-controller API which makes it clear that the reset controllers are used exclusively by the PHY driver. Note that the deprecated of_reset_control_get() and devm_reset_control_get() are just transitional wrappers for the explicit API so there's no functional change. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427063243.32576-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-03phy: qcom-qmp: fix reset-controller leak on probe errorsJohan Hovold
Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral). Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly. Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-03phy: qcom-qmp: fix struct clk leak on probe errorsJohan Hovold
Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral). Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220427063243.32576-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-02phy: qcom-qmp: fix phy-descriptor kernel-doc typoJohan Hovold
Fix misspelled "clock" in the description of the pipe_clk field in the PHY-descriptor kernel-doc comment. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220420152331.5527-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-05-02phy: rockchip-inno-usb2: Clean up some inconsistent indentingJiapeng Chong
Eliminate the follow smatch warning: drivers/phy/rockchip/phy-rockchip-inno-usb2.c:1203 rockchip_usb2phy_probe() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220421203038.4550-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: freescale: imx8m-pcie: Handle IMX8_PCIE_REFCLK_PAD_UNUSEDMarek Vasut
The 'fsl,refclk-pad-mode' DT property used to select clock source for PCIe PHY can have either of three values, IMX8_PCIE_REFCLK_PAD_INPUT, IMX8_PCIE_REFCLK_PAD_OUTPUT, IMX8_PCIE_REFCLK_PAD_UNUSED. The first two options are handled correctly by the driver, the last one is not, this patch implements support for the last option. The IMX8_PCIE_REFCLK_PAD_INPUT means PCIE_RESREF is PHY clock input, the IMX8_PCIE_REFCLK_PAD_OUTPUT means PHY clock are sourced from SoC internal PLL and output to PCIE_RESREF external IO pin. The last IMX8_PCIE_REFCLK_PAD_UNUSED is a combination of previous two, PHY clock are sourced from SoC internal PLL and not output anywhere. Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-arm-kernel@lists.infradead.org To: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20220413140710.10074-1-marex@denx.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: core: Warn when phy_power_on is called before phy_initJules Maselbas
A warning when the order of phy operation is mixed up by drivers, this is an atempt to make the phy usage more uniform across (usb) drivers. Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> Cc: Ahmad Fatoum <a.fatoum@pengutronix.de> Cc: Amelie DELAUNAY <amelie.delaunay@foss.st.com> Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220407102108.24211-4-jmaselbas@kalray.eu Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: core: Update documentation syntaxJules Maselbas
Update the syntax used by the documentation of phy operation functions. This is to unify the syntax with the newly added documentation. Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> Link: https://lore.kernel.org/r/20220407102108.24211-3-jmaselbas@kalray.eu Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: core: Add documentation of phy operation orderJules Maselbas
Add documentation on phy function usage: init function must be called before power_on; power_off must be called before exit. Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> Cc: Ahmad Fatoum <a.fatoum@pengutronix.de> Cc: Amelie DELAUNAY <amelie.delaunay@foss.st.com> Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220407102108.24211-2-jmaselbas@kalray.eu Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Handle ID IRQSamuel Holland
This supports detecting host mode for the OTG port without an extcon. The rv1108 properties are not updated due to lack of documentation. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-7-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Handle bvalid fallingSamuel Holland
Some SoCs have a bvalid falling interrupt, in addition to bvalid rising. This interrupt can detect OTG cable plugout immediately, so it can avoid the delay until the next scheduled work. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-6-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Support multi-bit mask propertiesSamuel Holland
The "bvalid" and "id" interrupts can trigger on either the rising edge or the falling edge, so each interrupt has two enable bits and two status bits. This change allows using a single property for both bits, checking whether either bit is set. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-5-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Do not lock in bvalid IRQ handlerSamuel Holland
Clearing the IRQ is atomic, so there is no need to hold the mutex. Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-4-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Do not check bvalid twiceSamuel Holland
The bvalid interrupt handler already checks bvalid status. The muxed IRQ handler just needs to call the other handler (plus any other handlers that will be added). Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-3-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: rockchip-inno-usb2: Fix muxed interrupt supportSamuel Holland
This commit fixes two issues with the muxed interrupt handler. First, the OTG port has the "bvalid" interrupt enabled, not "linestate". Since only the linestate interrupt was handled, and not the bvalid interrupt, plugging in a cable to the OTG port caused an interrupt storm. Second, the return values from the individual port IRQ handlers need to be OR-ed together. Otherwise, the lack of an interrupt from the last port would cause the handler to erroneously return IRQ_NONE. Fixes: ed2b5a8e6b98 ("phy: phy-rockchip-inno-usb2: support muxed interrupts") Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220414032258.40984-2-samuel@sholland.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: amlogic: fix error path in phy_g12a_usb3_pcie_probe()Heiner Kallweit
If clk_prepare_enable() fails we call clk_disable_unprepare() in the error path what results in a warning that the clock is disabled and unprepared already. And if we fail later in phy_g12a_usb3_pcie_probe() then we bail out w/o calling clk_disable_unprepare(). This patch fixes both errors. Fixes: 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2Paul Kocialkowski
The Allwinner A31 D-PHY supports both Rx and Tx modes. While the latter is already supported and used for MIPI DSI this adds support for the former, to be used with MIPI CSI-2. This implementation is inspired by Allwinner's V3s Linux SDK implementation, which was used as a documentation base. It uses the direction dt property to distinguish between tx and rx directions. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://lore.kernel.org/r/20220415152138.635525-3-paul.kocialkowski@bootlin.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-20phy: freescale: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode supportLiu Ying
i.MX8qxp SoC embeds a Mixel MIPI DPHY + LVDS PHY combo which supports either a MIPI DSI display or a LVDS display. The PHY mode is controlled by SCU firmware and the driver would call a SCU firmware function to configure the PHY mode. The single LVDS PHY has 4 data lanes to support a LVDS display. Also, with a master LVDS PHY and a slave LVDS PHY, they may work together to support a LVDS display with 8 data lanes(usually, dual LVDS link display). Note that this patch supports the LVDS PHY mode only for the i.MX8qxp Mixel combo PHY, i.e., the MIPI DPHY mode is yet to be supported, so for now error would be returned from ->set_mode() if MIPI DPHY mode is passed over to it for the combo PHY. Cc: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220419010852.452169-6-victor.liu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-14phy: ti: Add missing pm_runtime_disable() in serdes_am654_probeMiaoqian Lin
The pm_runtime_enable() will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for serdes_am654_probe(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301025853.1911-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-04-14phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probeMiaoqian Lin
The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to undo pm_runtime_use_autosuspend() In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.3 (git 2.53.0) at 2026-10-18 12:20:44 +0000