summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-12-31wifi: rtw89: wow: abstract DMA check register for RTL8922DEChin-Yen Lee
The coming RTL8922DE use different register and its bit to poll if DMA becomes idle before entering WoWLAN. Abstract to share common flow. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-5-pkshih@realtek.com
2025-12-31wifi: rtw89: wow: add WOW_CAM update function for 8922DChin-Yen Lee
For WOW_CAM update function, 8922DE use different H2C command from 8922AE. Use chip to distinguish them. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-4-pkshih@realtek.com
2025-12-31wifi: rtw89: wow: change type of WoWLAN pattern mask to __le32Ping-Ke Shih
The WoWLAN pattern mask is generated in byte stream, and actually firmware expects to see the same byte stream too. Since these byte stream is sent to firmware with 32-bit stream in little-endian order. Change to mask to __le32, and just do assignment instead of le32 conversion to wkfm fields of H2C command. For little-endian machine, it doesn't change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-3-pkshih@realtek.com
2025-12-31wifi: rtw89: wow: use struct style to fill WOW CAM H2C commandChin-Yen Lee
The WOW CAM H2C command is used to tell firmware the content of pattern match. Use struct instead of macros to fill the data. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-2-pkshih@realtek.com
2025-12-31wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_addAli Tariq
The driver does not set hw->sta_data_size, which causes mac80211 to allocate insufficient space for driver private station data in __sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of struct rtl8xxxu_sta_info through sta->drv_priv, this results in a slab-out-of-bounds write. KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter: BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346 Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12 Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during probe, similar to how hw->vif_data_size is configured. This ensures mac80211 allocates sufficient space for the driver's per-station private data. Tested on StarFive VisionFive 2 v1.2A board. Fixes: eef55f1545c9 ("wifi: rtl8xxxu: support multiple interfaces in {add,remove}_interface()") Cc: stable@vger.kernel.org Signed-off-by: Ali Tariq <alitariq45892@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251225115430.13011-1-alitariq45892@gmail.com
2025-12-30net: enetc: do not print error log if addr is 0Wei Fang
A value of 0 for addr indicates that the IEB_LBCR register does not need to be configured, as its default value is 0. However, the driver will print an error log if addr is 0, so this issue needs to be fixed. Fixes: 50bfd9c06f0f ("net: enetc: set external PHY address in IERB for i.MX94 ENETC") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20251222022628.4016403-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-30net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to ↵Xiaolei Wang
macb_open() In the non-RT kernel, local_bh_disable() merely disables preemption, whereas it maps to an actual spin lock in the RT kernel. Consequently, when attempting to refill RX buffers via netdev_alloc_skb() in macb_mac_link_up(), a deadlock scenario arises as follows: WARNING: possible circular locking dependency detected 6.18.0-08691-g2061f18ad76e #39 Not tainted ------------------------------------------------------ kworker/0:0/8 is trying to acquire lock: ffff00080369bbe0 (&bp->lock){+.+.}-{3:3}, at: macb_start_xmit+0x808/0xb7c but task is already holding lock: ffff000803698e58 (&queue->tx_ptr_lock){+...}-{3:3}, at: macb_start_xmit +0x148/0xb7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&queue->tx_ptr_lock){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x148/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #2 (_xmit_ETHER#2){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 sch_direct_xmit+0x11c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #1 ((softirq_ctrl.lock)){+.+.}-{3:3}: lock_release+0x250/0x348 __local_bh_enable_ip+0x7c/0x240 __netdev_alloc_skb+0x1b4/0x1d8 gem_rx_refill+0xdc/0x240 gem_init_rings+0xb4/0x108 macb_mac_link_up+0x9c/0x2b4 phylink_resolve+0x170/0x614 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #0 (&bp->lock){+.+.}-{3:3}: __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &bp->lock --> _xmit_ETHER#2 --> &queue->tx_ptr_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&queue->tx_ptr_lock); lock(_xmit_ETHER#2); lock(&queue->tx_ptr_lock); lock(&bp->lock); *** DEADLOCK *** Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0xa0/0xf0 dump_stack+0x18/0x24 print_circular_bug+0x28c/0x370 check_noncircular+0x198/0x1ac __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 Notably, invoking the mog_init_rings() callback upon link establishment is unnecessary. Instead, we can exclusively call mog_init_rings() within the ndo_open() callback. This adjustment resolves the deadlock issue. Furthermore, since MACB_CAPS_MACB_IS_EMAC cases do not use mog_init_rings() when opening the network interface via at91ether_open(), moving mog_init_rings() to macb_open() also eliminates the MACB_CAPS_MACB_IS_EMAC check. Fixes: 633e98a711ac ("net: macb: use resolved link config in mac_link_up()") Cc: stable@vger.kernel.org Suggested-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://patch.msgid.link/20251222015624.1994551-1-xiaolei.wang@windriver.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-30net: usb: sr9700: fix incorrect command used to write single registerEthan Nelson-Moore
This fixes the device failing to initialize with "error reading MAC address" for me, probably because the incorrect write of NCR_RST to SR_NCR is not actually resetting the device. Fixes: c9b37458e95629b1d1171457afdcc1bf1eb7881d ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Cc: stable@vger.kernel.org Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com> Link: https://patch.msgid.link/20251221082400.50688-1-enelsonmoore@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-29usbnet: avoid a possible crash in dql_completed()Eric Dumazet
syzbot reported a crash [1] in dql_completed() after recent usbnet BQL adoption. The reason for the crash is that netdev_reset_queue() is called too soon. It should be called after cancel_work_sync(&dev->bh_work) to make sure no more TX completion can happen. [1] kernel BUG at lib/dynamic_queue_limits.c:99 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 5197 Comm: udevd Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:dql_completed+0xbe1/0xbf0 lib/dynamic_queue_limits.c:99 Call Trace: <IRQ> netdev_tx_completed_queue include/linux/netdevice.h:3864 [inline] netdev_completed_queue include/linux/netdevice.h:3894 [inline] usbnet_bh+0x793/0x1020 drivers/net/usb/usbnet.c:1601 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 bh_worker+0x2b1/0x600 kernel/workqueue.c:3611 tasklet_action+0xc/0x70 kernel/softirq.c:952 handle_softirqs+0x27d/0x850 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] invoke_softirq kernel/softirq.c:496 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:723 irq_exit_rcu+0x9/0x30 kernel/softirq.c:739 Fixes: 7ff14c52049e ("usbnet: Add support for Byte Queue Limits (BQL)") Reported-by: syzbot+5b55e49f8bbd84631a9c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6945644f.a70a0220.207337.0113.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Simon Schippers <simon.schippers@tu-dortmund.de> Link: https://patch.msgid.link/20251219144459.692715-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-29gve: defer interrupt enabling until NAPI registrationAnkit Garg
Currently, interrupts are automatically enabled immediately upon request. This allows interrupt to fire before the associated NAPI context is fully initialized and cause failures like below: [ 0.946369] Call Trace: [ 0.946369] <IRQ> [ 0.946369] __napi_poll+0x2a/0x1e0 [ 0.946369] net_rx_action+0x2f9/0x3f0 [ 0.946369] handle_softirqs+0xd6/0x2c0 [ 0.946369] ? handle_edge_irq+0xc1/0x1b0 [ 0.946369] __irq_exit_rcu+0xc3/0xe0 [ 0.946369] common_interrupt+0x81/0xa0 [ 0.946369] </IRQ> [ 0.946369] <TASK> [ 0.946369] asm_common_interrupt+0x22/0x40 [ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10 Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto enablement and explicitly enable the interrupt in NAPI initialization path (and disable it during NAPI teardown). This ensures that interrupt lifecycle is strictly coupled with readiness of NAPI context. Cc: stable@vger.kernel.org Fixes: 1dfc2e46117e ("gve: Refactor napi add and remove functions") Signed-off-by: Ankit Garg <nktgrg@google.com> Reviewed-by: Jordan Rhee <jordanrhee@google.com> Reviewed-by: Joshua Washington <joshwash@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20251219102945.2193617-1-hramamurthy@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-29net: stmmac: fix the crash issue for zero copy XDP_TX actionWei Fang
There is a crash issue when running zero copy XDP_TX action, the crash log is shown below. [ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000 [ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP [ 216.301694] Call trace: [ 216.304130] dcache_clean_poc+0x20/0x38 (P) [ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0 [ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400 [ 216.317701] __stmmac_xdp_run_prog+0x164/0x368 [ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00 [ 216.326576] __napi_poll+0x40/0x218 [ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt For XDP_TX action, the xdp_buff is converted to xdp_frame by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the memory type and always uses the page pool type, this leads to invalid mappings and causes the crash. Therefore, check the xdp_buff memory type in stmmac_xdp_xmit_back() to fix this issue. Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20251204071332.1907111-1-wei.fang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-29Merge tag 'wireless-2025-12-17' of ↵Paolo Abeni
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Various fixes all over, most are recent regressions but also some long-standing issues: - cfg80211: - fix an issue with overly long SSIDs - mac80211: - long-standing beacon protection issue on some devices - for for a multi-BSSID AP-side issue - fix a syzbot warning on OCB (not really used in practice) - remove WARN on connections using disabled channels, as that can happen due to changes in the disable flag - fix monitor mode list iteration - iwlwifi: - fix firmware loading on certain (really old) devices - add settime64 to PTP clock to avoid a warning and clock registration failure, but it's not actually supported - rtw88: - remove WQ_UNBOUND since it broke USB adapters (because it can't be used with WQ_BH) - fix SDIO issues with certain devices - rtl8192cu: fix TID array out-of-bounds (since 6.9) - wlcore (TI): add missing skb push headroom increase * tag 'wireless-2025-12-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: Implement settime64 as stub for MVM/MLD PTP wifi: iwlwifi: Fix firmware version handling wifi: mac80211: ocb: skip rx_no_sta when interface is not joined wifi: mac80211: do not use old MBSSID elements wifi: mac80211: don't WARN for connections on invalid channels wifi: wlcore: ensure skb headroom before skb_push wifi: cfg80211: sme: store capped length in __cfg80211_connect_result() wifi: mac80211: fix list iteration in ieee80211_add_virtual_monitor() wifi: mac80211: Discard Beacon frames to non-broadcast address Revert "wifi: rtw88: add WQ_UNBOUND to alloc_workqueue users" wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc() wifi: rtw88: limit indirect IO under powered off for RTL8822CS ==================== Link: https://patch.msgid.link/20251217201441.59876-3-johannes@sipsolutions.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-29octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"Anshumali Gaur
This patch ensures that the RX ring size (rx_pending) is not set below the permitted length. This avoids UBSAN shift-out-of-bounds errors when users passes small or zero ring sizes via ethtool -G. Fixes: d45d8979840d ("octeontx2-pf: Add basic ethtool support") Signed-off-by: Anshumali Gaur <agaur@marvell.com> Link: https://patch.msgid.link/20251219062226.524844-1-agaur@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-28net: mana: Fix use-after-free in reset service rescan pathDipayaan Roy
When mana_serv_reset() encounters -ETIMEDOUT or -EPROTO from mana_gd_resume(), it performs a PCI rescan via mana_serv_rescan(). mana_serv_rescan() calls pci_stop_and_remove_bus_device(), which can invoke the driver's remove path and free the gdma_context associated with the device. After returning, mana_serv_reset() currently jumps to the out label and attempts to clear gc->in_service, dereferencing a freed gdma_context. The issue was observed with the following call logs: [ 698.942636] BUG: unable to handle page fault for address: ff6c2b638088508d [ 698.943121] #PF: supervisor write access in kernel mode [ 698.943423] #PF: error_code(0x0002) - not-present page [S[ 698.943793] Pat Dec 6 07:GD5 100000067 P4D 1002f7067 PUD 1002f8067 PMD 101bef067 PTE 0 0:56 2025] hv_[n e 698.944283] Oops: Oops: 0002 [#1] SMP NOPTI tvsc f8615163-00[ 698.944611] CPU: 28 UID: 0 PID: 249 Comm: kworker/28:1 ... [Sat Dec 6 07:50:56 2025] R10: [ 699.121594] mana 7870:00:00.0 enP30832s1: Configured vPort 0 PD 18 DB 16 000000000000001b R11: 0000000000000000 R12: ff44cf3f40270000 [Sat Dec 6 07:50:56 2025] R13: 0000000000000001 R14: ff44cf3f402700c8 R15: ff44cf3f4021b405 [Sat Dec 6 07:50:56 2025] FS: 0000000000000000(0000) GS:ff44cf7e9fcf9000(0000) knlGS:0000000000000000 [Sat Dec 6 07:50:56 2025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Sat Dec 6 07:50:56 2025] CR2: ff6c2b638088508d CR3: 000000011fe43001 CR4: 0000000000b73ef0 [Sat Dec 6 07:50:56 2025] Call Trace: [Sat Dec 6 07:50:56 2025] <TASK> [Sat Dec 6 07:50:56 2025] mana_serv_func+0x24/0x50 [mana] [Sat Dec 6 07:50:56 2025] process_one_work+0x190/0x350 [Sat Dec 6 07:50:56 2025] worker_thread+0x2b7/0x3d0 [Sat Dec 6 07:50:56 2025] kthread+0xf3/0x200 [Sat Dec 6 07:50:56 2025] ? __pfx_worker_thread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ret_from_fork+0x21a/0x250 [Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ret_from_fork_asm+0x1a/0x30 [Sat Dec 6 07:50:56 2025] </TASK> Fix this by returning immediately after mana_serv_rescan() to avoid accessing GC state that may no longer be valid. Fixes: 9bf66036d686 ("net: mana: Handle hardware recovery events when probing the device") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/20251218131054.GA3173@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-28net: usb: asix: validate PHY address before useDeepanshu Kartikey
The ASIX driver reads the PHY address from the USB device via asix_read_phy_addr(). A malicious or faulty device can return an invalid address (>= PHY_MAX_ADDR), which causes a warning in mdiobus_get_phy(): addr 207 out of range WARNING: drivers/net/phy/mdio_bus.c:76 Validate the PHY address in asix_read_phy_addr() and remove the now-redundant check in ax88172a.c. Reported-by: syzbot+3d43c9066a5b54902232@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=3d43c9066a5b54902232 Tested-by: syzbot+3d43c9066a5b54902232@syzkaller.appspotmail.com Fixes: 7e88b11a862a ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return") Link: https://lore.kernel.org/all/20251217085057.270704-1-kartikey406@gmail.com/T/ [v1] Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251218011156.276824-1-kartikey406@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-28net: mdio: rtl9300: use scoped for loopsRosen Penev
Currently in the return path, fwnode_handle_put calls are missing. Just use _scoped to avoid the issue. Fixes: 24e31e474769 ("net: mdio: Add RTL9300 MDIO driver") Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://patch.msgid.link/20251217210153.14641-1-rosenp@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-27net: dsa: b53: skip multicast entries for fdb_dump()Jonas Gorski
port_fdb_dump() is supposed to only add fdb entries, but we iterate over the full ARL table, which also includes multicast entries. So check if the entry is a multicast entry before passing it on to the callback(). Additionally, the port of those entries is a bitmask, not a port number, so any included entries would have even be for the wrong port. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20251217205756.172123-1-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-27Merge branch '40GbE' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2025-12-17 (i40e, iavf, idpf, e1000) For i40e: Przemyslaw immediately schedules service task following changes to filters to ensure timely setup for PTP. Gregory Herrero adjusts VF descriptor size checks to be device specific. For iavf: Kohei Enju corrects a couple of condition checks which caused off-by-one issues. For idpf: Larysa fixes LAN memory region call to follow expected requirements. Brian Vazquez reduces mailbox wait time during init to avoid lengthy delays. For e1000: Guangshuo Li adds validation of data length to prevent out-of-bounds access. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000: fix OOB in e1000_tbi_should_accept() idpf: reduce mbx_task schedule delay to 300us idpf: fix LAN memory regions command on some NVMs iavf: fix off-by-one issues in iavf_config_rss_reg() i40e: validate ring_len parameter against hardware-specific values i40e: fix scheduling in set_rx_mode ==================== Link: https://patch.msgid.link/ Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-27bng_en: update module descriptionRajashekar Hudumula
The Broadcom BCM57708/800G NIC family is branded as ThorUltra. Update the driver description accordingly. Fixes: 74715c4ab0fa0 ("bng_en: Add PCI interface") Signed-off-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com> Link: https://patch.msgid.link/20251217104748.3004706-1-rajashekar.hudumula@broadcom.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-26wifi: rtw88: Fix inadvertent sharing of struct ieee80211_supported_band dataBitterblue Smith
Internally wiphy writes to individual channels in this structure, so we must not share one static definition of channel list between multiple device instances, because that causes hard to debug breakage. For example, with two rtw88 driven devices in the system, channel information may get incoherent, preventing channel use. Copied from commit 0ae36391c804 ("wifi: rtw89: Fix inadverent sharing of struct ieee80211_supported_band data"). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/e94ad653-2b6d-4284-a33c-8c694f88955b@gmail.com
2025-12-26wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()Bitterblue Smith
Simplify the code by using device managed memory allocations. This also fixes a memory leak in rtw_register_hw(). The supported bands were not freed in the error path. Copied from commit 145df52a8671 ("wifi: rtw89: Convert rtw89_core_set_supported_band to use devm_*"). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/1aa7fdef-2d5b-4a31-a4e9-fac8257ed30d@gmail.com
2025-12-26wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon()Bitterblue Smith
rtw_core_enable_beacon() reads 4 bytes from an address that is not a multiple of 4. This results in a crash on some systems. Do 1 byte reads/writes instead. Unable to handle kernel paging request at virtual address ffff8000827e0522 Mem abort info: ESR = 0x0000000096000021 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000 [ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13 Internal error: Oops: 0000000096000021 [#1] SMP Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...] CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY Tainted: [W]=WARN Hardware name: FriendlyElec NanoPC-T6 LTS (DT) Workqueue: phy0 rtw_c2h_work [rtw88_core] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : rtw_pci_read32+0x18/0x40 [rtw88_pci] lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core] sp : ffff800080cc3ca0 x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828 x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00 x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001 x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522 Call trace: rtw_pci_read32+0x18/0x40 [rtw88_pci] (P) rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core] rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core] rtw_c2h_work+0x50/0x98 [rtw88_core] process_one_work+0x178/0x3f8 worker_thread+0x208/0x418 kthread+0x120/0x220 ret_from_fork+0x10/0x20 Code: d28fe202 8b020000 f9524400 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- Fixes: ad6741b1e044 ("wifi: rtw88: Stop high queue during scan") Cc: stable@vger.kernel.org Closes: https://github.com/lwfinger/rtw88/issues/418 Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/6345300d-8c93-464c-9b05-d0d9af3c97ad@gmail.com
2025-12-26wifi: rtw88: Increase the RX gain before scanningMartin Hrůza
The driver reduces the RX gain while connected to a network located close by. In this condition scans return few results because the more distant networks can't be heard. Temporarily increase the RX gain before scanning in order to detect all available networks. Reset the RX gain back to the last recorded value once the scan finishes. Link: https://github.com/lwfinger/rtw88/issues/337 Signed-off-by: Martin Hrůza <martin.hruza123@gmail.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/c2e72aff-190d-4f59-9914-2588de756385@gmail.com
2025-12-26wifi: rtw89: mcc: reset probe counter when receiving beaconChih-Kang Chang
For BE chips, needs to transmit QoS null data periodically to ensure the connection with AP in GC+STA mode. However, in environments with interference, the Qos null data might fail to transmit successfully. Therefore, when receive the beacon from AP will reset the QoS null data failure counter to avoid unnecessary disconnection. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-13-pkshih@realtek.com
2025-12-26wifi: rtw89: setting TBTT AGG number when mac port initializationChih-Kang Chang
When initializing mac port, needs to set TBTT AGG number to trigger TBTT related interrupts. Otherwise, after sending join info H2C command with disconnection mode, firmware will clear TBTT AGG number. Without the setting from mac port initialization after that, this port will not be able to transmit beacons. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-12-pkshih@realtek.com
2025-12-26wifi: rtw89: warn unexpected polling value of XTAL SIPing-Ke Shih
XTAL SI is an indirect serial interface to access registers in another hardware domain. When BT driver initializes UART interface, firmware might rarely control XTAL SI at the same time causing access racing. Current is to adjust initialization flow to avoid the racing. To make the racing visible if it still presents, add a message to address this. USB adapters might be unplugged suddenly, causing flooding messages. Check RTW89_FLAG_UNPLUGGED flag to avoid them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-11-pkshih@realtek.com
2025-12-26wifi: rtw89: refine C2H reg event polling timeout for LPSChih-Kang Chang
The each of C2H reg event have different polling timeout. Refine the LPS C2H reg event polling timeout. Otherwise, during SER, the FW has already crashed, the leave LPS check will wait until timeout expires, causing the SER recovery to take too long. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-10-pkshih@realtek.com
2025-12-26wifi: rtw89: debug: support SER L0/L1 simulation via halt H2CZong-Zhe Yang
Original methods of SER (system error recovery) L0/L1 simulations need to leave PS mode before working. Introduce new methods to simulate SER L0/L1 and they can work under PS. Since new methods require FW support, so add a FW feature flag and configure the supported chips. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-9-pkshih@realtek.com
2025-12-26wifi: rtw89: debug: add ser_counters dbgfsZong-Zhe Yang
Dump counters of SER (system error recoery) L0/L1 related cases. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-8-pkshih@realtek.com
2025-12-26wifi: rtw89: ser: L1 skip polling status if FW runs event modeZong-Zhe Yang
Originally, polling FW status was required during recovering from L1. Now, because newer FW support event mode, the polling can be skipped. Add a FW feature flag and configure the supported chips. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-7-pkshih@realtek.com
2025-12-26wifi: rtw89: ser: enable error IMR after recovering from L1Zong-Zhe Yang
After recovering from L1, explicitly enable error IMR to ensure next L1 SER (system error recovery) can work normally. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-6-pkshih@realtek.com
2025-12-26wifi: rtw89: mac: reset power state before switching to power onPing-Ke Shih
To run power on function properly, reset power states (off/on/PS) to initial state. Otherwise, it might be unusable due to fail to power on. Since a USB adapter might play as USB mass storage with driver and then switch to WiFi adapter, causing it stays on power-on state when doing WiFi USB probe. Exclude this case. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-5-pkshih@realtek.com
2025-12-26wifi: rtw89: mlo: fix incorrect link address in management framesKuan-Chung Chen
Deauth frames used wrong link address after switching from default link to another, causing AP to reject subsequent auth frames. This affected not only deauth but all management frames. Fixed by setting correct mac_id to let header conversion references correct address CAM. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-4-pkshih@realtek.com
2025-12-26wifi: rtw89: mlo: fix missing TX null-data 1 during link switchKuan-Chung Chen
Fix missing null-data 1 when switching links. The FW should send a null-data 1 to notify AP before disabling the old link. Adjust the position of the H2C rtw89_fw_h2c_mlo_link_cfg to ensure proper FW behavior during link transition. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-3-pkshih@realtek.com
2025-12-26wifi: rtw89: 8852b: increase beacon loss to 6 secondsKuan-Chung Chen
Intermittent beacon loss from a specific AP can lead to disconnections. Increasing the beacon loss threshold helps stabilize the connection. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-2-pkshih@realtek.com
2025-12-23smc91x: fix broken irq-context in PREEMPT_RTYeoreum Yun
When smc91x.c is built with PREEMPT_RT, the following splat occurs in FVP_RevC: [ 13.055000] smc91x LNRO0003:00 eth0: link up, 10Mbps, half-duplex, lpa 0x0000 [ 13.062137] BUG: workqueue leaked atomic, lock or RCU: kworker/2:1[106] [ 13.062137] preempt=0x00000000 lock=0->0 RCU=0->1 workfn=mld_ifc_work [ 13.062266] C ** replaying previous printk message ** [ 13.062266] CPU: 2 UID: 0 PID: 106 Comm: kworker/2:1 Not tainted 6.18.0-dirty #179 PREEMPT_{RT,(full)} [ 13.062353] Hardware name: , BIOS [ 13.062382] Workqueue: mld mld_ifc_work [ 13.062469] Call trace: [ 13.062494] show_stack+0x24/0x40 (C) [ 13.062602] __dump_stack+0x28/0x48 [ 13.062710] dump_stack_lvl+0x7c/0xb0 [ 13.062818] dump_stack+0x18/0x34 [ 13.062926] process_scheduled_works+0x294/0x450 [ 13.063043] worker_thread+0x260/0x3d8 [ 13.063124] kthread+0x1c4/0x228 [ 13.063235] ret_from_fork+0x10/0x20 This happens because smc_special_trylock() disables IRQs even on PREEMPT_RT, but smc_special_unlock() does not restore IRQs on PREEMPT_RT. The reason is that smc_special_unlock() calls spin_unlock_irqrestore(), and rcu_read_unlock_bh() in __dev_queue_xmit() cannot invoke rcu_read_unlock() through __local_bh_enable_ip() when current->softirq_disable_cnt becomes zero. To address this issue, replace smc_special_trylock() with spin_trylock_irqsave(). Fixes: 342a93247e08 ("locking/spinlock: Provide RT variant header: <linux/spinlock_rt.h>") Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251217085115.1730036-1-yeoreum.yun@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-23net: wangxun: move PHYLINK dependencyArnd Bergmann
The LIBWX library code is what calls into phylink, so any user of it has to select CONFIG_PHYLINK at the moment, with NGBEVF missing this: x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset': wx_ethtool.c:(.text+0x613): undefined reference to `phylink_ethtool_nway_reset' x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_get_link_ksettings': wx_ethtool.c:(.text+0x62b): undefined reference to `phylink_ethtool_ksettings_get' x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_set_link_ksettings': wx_ethtool.c:(.text+0x643): undefined reference to `phylink_ethtool_ksettings_set' x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_get_pauseparam': wx_ethtool.c:(.text+0x65b): undefined reference to `phylink_ethtool_get_pauseparam' x86_64-linux-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_set_pauseparam': wx_ethtool.c:(.text+0x677): undefined reference to `phylink_ethtool_set_pauseparam' Add the 'select PHYLINK' line in the libwx option directly so this will always be enabled for all current and future wangxun drivers, and remove the now duplicate lines. Fixes: a0008a3658a3 ("net: wangxun: add ngbevf build") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20251216213547.115026-1-arnd@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-23net: usb: rtl8150: fix memory leak on usb_submit_urb() failureDeepakkumar Karn
In async_set_registers(), when usb_submit_urb() fails, the allocated async_req structure and URB are not freed, causing a memory leak. The completion callback async_set_reg_cb() is responsible for freeing these allocations, but it is only called after the URB is successfully submitted and completes (successfully or with error). If submission fails, the callback never runs and the memory is leaked. Fix this by freeing both the URB and the request structure in the error path when usb_submit_urb() fails. Reported-by: syzbot+8dd915c7cb0490fc8c52@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8dd915c7cb0490fc8c52 Fixes: 4d12997a9bb3 ("drivers: net: usb: rtl8150: concurrent URB bugfix") Signed-off-by: Deepakkumar Karn <dkarn@redhat.com> Link: https://patch.msgid.link/20251216151304.59865-2-dkarn@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-23amd-xgbe: reset retries and mode on RX adapt failuresRaju Rangoju
During the stress tests, early RX adaptation handshakes can fail, such as missing the RX_ADAPT ACK or not receiving a coefficient update before block lock is established. Continuing to retry RX adaptation in this state is often ineffective if the current mode selection is not viable. Resetting the RX adaptation retry counter when an RX_ADAPT request fails to receive ACK or a coefficient update prior to block lock, and clearing mode_set so the next bring-up performs a fresh mode selection rather than looping on a likely invalid configuration. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20251215151728.311713-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-23net: airoha: Move net_devs registration in a dedicated routineLorenzo Bianconi
Since airoha_probe() is not executed under rtnl lock, there is small race where a given device is configured by user-space while the remaining ones are not completely loaded from the dts yet. This condition will allow a hw device misconfiguration since there are some conditions (e.g. GDM2 check in airoha_dev_init()) that require all device are properly loaded from the device tree. Fix the issue moving net_devices registration at the end of the airoha_probe routine. Fixes: 9cd451d414f6e ("net: airoha: Add loopback support for GDM2") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251214-airoha-fix-dev-registration-v1-1-860e027ad4c6@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-23team: fix check for port enabled in team_queue_override_port_prio_changed()Jiri Pirko
There has been a syzkaller bug reported recently with the following trace: list_del corruption, ffff888058bea080->prev is LIST_POISON2 (dead000000000122) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:59! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 3 UID: 0 PID: 21246 Comm: syz.0.2928 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:__list_del_entry_valid_or_report+0x13e/0x200 lib/list_debug.c:59 Code: 48 c7 c7 e0 71 f0 8b e8 30 08 ef fc 90 0f 0b 48 89 ef e8 a5 02 55 fd 48 89 ea 48 89 de 48 c7 c7 40 72 f0 8b e8 13 08 ef fc 90 <0f> 0b 48 89 ef e8 88 02 55 fd 48 89 ea 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d49f370 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffff888058bea080 RCX: ffffc9002817d000 RDX: 0000000000000000 RSI: ffffffff819becc6 RDI: 0000000000000005 RBP: dead000000000122 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000001 R12: ffff888039e9c230 R13: ffff888058bea088 R14: ffff888058bea080 R15: ffff888055461480 FS: 00007fbbcfe6f6c0(0000) GS:ffff8880d6d0a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c3afcb0 CR3: 00000000382c7000 CR4: 0000000000352ef0 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:223 [inline] list_del_rcu include/linux/rculist.h:178 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:826 [inline] __team_queue_override_port_del drivers/net/team/team_core.c:821 [inline] team_queue_override_port_prio_changed drivers/net/team/team_core.c:883 [inline] team_priority_option_set+0x171/0x2f0 drivers/net/team/team_core.c:1534 team_option_set drivers/net/team/team_core.c:376 [inline] team_nl_options_set_doit+0x8ae/0xe60 drivers/net/team/team_core.c:2653 genl_family_rcv_msg_doit+0x209/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa98/0xc70 net/socket.c:2630 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2684 __sys_sendmsg+0x16d/0x220 net/socket.c:2716 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The problem is in this flow: 1) Port is enabled, queue_id != 0, in qom_list 2) Port gets disabled -> team_port_disable() -> team_queue_override_port_del() -> del (removed from list) 3) Port is disabled, queue_id != 0, not in any list 4) Priority changes -> team_queue_override_port_prio_changed() -> checks: port disabled && queue_id != 0 -> calls del - hits the BUG as it is removed already To fix this, change the check in team_queue_override_port_prio_changed() so it returns early if port is not enabled. Reported-by: syzbot+422806e5f4cce722a71f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=422806e5f4cce722a71f Fixes: 6c31ff366c11 ("team: remove synchronize_rcu() called during queue override change") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251212102953.167287-1-jiri@resnulli.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-12-23wifi: rtlwifi: fix typo 'received' in commentRohit Chourasia
Fix typo received -> received by review. Signed-off-by: Rohit Chourasia <chourasiarohit27@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251211161911.30611-1-chourasiarohit27@gmail.com
2025-12-23wifi: rtw89: correct use sequence of driver_data in skb->infoPing-Ke Shih
As ieee80211_tx_info is used to assist filling TX descriptor, and layout of IEEE80211_SKB_CB(skb)->driver_data (accessing by RTW89_TX_SKB_CB()) is union, so driver_data must be used by/after rtw89_hci_tx_write() or just before calling rtw89_hci_tx_write(). Otherwise, ieee80211_tx_info::control data is overwritten. Found this by using injected packets which uses ieee80211_tx_info::control, but always sending incorrect data rate. Cc: Fedor Pchelkin <pchelkin@ispras.ru> Fixes: d5da3d9fb05f ("wifi: rtw89: process TX wait skbs for USB via C2H handler") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Fedor Pchelkin <pchelkin@ispras.ru> Link: https://patch.msgid.link/20251217072646.43209-1-pkshih@realtek.com
2025-12-23wifi: rtw89: 8852au: add support for TP TX30U PlusJan Gerber
the device shows up like this and everything seams to work: Bus 004 Device 003: ID 3625:010d Realtek 802.11ax WLAN Adapter Signed-off-by: Jan Gerber <j@mailb.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251212005515.2059533-1-j@mailb.org
2025-12-23wifi: rtw89: add WQ_PERCPU to alloc_workqueue usersMarco Crivellari
This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") The refactoring is going to alter the default behavior of alloc_workqueue() to be unbound by default. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. For more details see the Link tag below. In order to keep alloc_workqueue() behavior identical, explicitly request WQ_PERCPU. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/ Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251210101209.47176-1-marco.crivellari@suse.com
2025-12-23wifi: rtw89: 8922a: set random mac if efuse contains zeroesJose Ignacio Tornos Martinez
I have some rtl8922ae devices with no permanent mac stored in efuse. It could be properly saved and/or configured from user tools like NetworkManager, but it would be desirable to be able to initialize it somehow to get the device working by default. So, in the same way as with other devices, if the mac address read from efuse contains zeros, a random mac address is assigned to at least allow operation, and the user is warned about this in case any action needs to be considered. Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251126091905.217951-1-jtornosm@redhat.com
2025-12-23wifi: rtw88: rtw8821cu: Add ID for Mercusys MU6HHsiu-Ming Chang
Add support for Mercusys MU6H AC650 High Gain Wireless Dual Band USB Adapter V1.30. It is based on RTL8811CU, usb device ID is 2c4e:0105. Signed-off-by: Hsiu-Ming Chang <cges30901@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251205003245.5762-1-cges30901@gmail.com
2025-12-23wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode()Bitterblue Smith
rtw8822b_set_antenna() can be called from userspace when the chip is powered off. In that case a WARNING is triggered in rtw8822b_config_trx_mode() because trying to read the RF registers when the chip is powered off returns an unexpected value. Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when the chip is powered on. ------------[ cut here ]------------ write RF mode table fail WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021 RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] Call Trace: <TASK> rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b] rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb] ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3] nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? netdev_run_todo+0x63/0x550 genl_family_rcv_msg_doit+0xfc/0x160 genl_rcv_msg+0x1aa/0x2b0 ? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 ? refill_obj_stock+0x12e/0x240 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? do_syscall_64+0x81/0x970 ? ksys_read+0x73/0xf0 ? do_syscall_64+0x81/0x970 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- Link: https://github.com/lwfinger/rtw88/issues/366 Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/fb9a3444-9319-4aa2-8719-35a6308bf568@gmail.com
2025-12-23wifi: rtw88: fix DTIM period handling when conf->dtim_period is zeroRoman Peshkichev
The function rtw_set_dtim_period() accepted an 'int' dtim_period parameter, while mac80211 provides dtim_period as 'u8' in struct ieee80211_bss_conf. In IBSS (ad-hoc) mode mac80211 may set dtim_period to 0. The driver unconditionally wrote (dtim_period - 1) to REG_DTIM_COUNTER_ROOT, which resulted in 0xFF when dtim_period was 0. This caused delays in broadcast/multicast traffic processing and issues with ad-hoc operation. Convert the function parameter to u8 to match ieee80211_bss_conf and avoid the underflow by writing 0 when dtim_period is 0. Link: https://github.com/lwfinger/rtw88/issues/406 Signed-off-by: Roman Peshkichev <roman.peshkichev@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251125180937.22977-1-roman.peshkichev@gmail.com
2025-12-22net: phy: mediatek: fix nvmem cell reference leak in mt798x_phy_calibrationMiaoqian Lin
When nvmem_cell_read() fails in mt798x_phy_calibration(), the function returns without calling nvmem_cell_put(), leaking the cell reference. Move nvmem_cell_put() right after nvmem_cell_read() to ensure the cell reference is always released regardless of the read result. Found via static analysis and code review. Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251211081313.2368460-1-linmq006@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-17 06:08:50 +0000