| Age | Commit message (Collapse) | Author |
|---|
|
Adjust z8 latency for performance.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit d0f639c5869399bf6dde4d694d5f8c0ab8c0ec46.
The previous commit causes failure to light up for 1080p
eDP + 8k HDMI panel combo.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When usb4 bandwidth allocation mode is enabled, driver need to request
bandwidth from connection manager. For mst link, the requested
bandwidth should be big enough for all remote streams.
[HOW]
- If mst link, the requested bandwidth should be the sum of all mst
streams bandwidth added with dp MTPH overhead.
- Allocate/deallcate usb4 bandwidth when setting dpms on/off.
- When doing display mode validation, driver also need to consider total
bandwidth of all mst streams for mst link.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 6e4337f695c25162f0296934152506ad596fcebf.
The original commit causes regression in corner case with HDMI at
specific timings. Reverting from staging to get the full suite to
retest.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 6b2b782ad6a25734ae847d1659bea3f613dbb563.
The original commit causes issues with certain features when DRR is
disabled, need to revisit this change later after resolving issues with
new DRR policy.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If an OPP is used for a different OPTC without first being disconnected
from the previous OPTC, unexpected behaviour can occur. This also
applies to phantom pipes, which is what the current logic missed.
[How]
Disconnect OPPs from OPTC for phantom pipes before disabling OTG master.
Also move the disconnection to before the OTG master disable, since the
register is double buffered.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Panels show corruption with high refresh rate timings when ssc is
enabled.
[How]
Read down-spread percentage from lut to adjust dprefclk. Issues come
from S0i3 with this commit has been fixed by SMU.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
======================================================
WARNING: possible circular locking dependency detected
6.5.0-kfd-fkuehlin #276 Not tainted
------------------------------------------------------
kworker/8:2/2676 is trying to acquire lock:
ffff9435aae95c88 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}, at: __flush_work+0x52/0x550
but task is already holding lock:
ffff9435cd8e1720 (&svms->lock){+.+.}-{3:3}, at: svm_range_deferred_list_work+0xe8/0x340 [amdgpu]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&svms->lock){+.+.}-{3:3}:
__mutex_lock+0x97/0xd30
kfd_ioctl_alloc_memory_of_gpu+0x6d/0x3c0 [amdgpu]
kfd_ioctl+0x1b2/0x5d0 [amdgpu]
__x64_sys_ioctl+0x86/0xc0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
-> #1 (&mm->mmap_lock){++++}-{3:3}:
down_read+0x42/0x160
svm_range_evict_svm_bo_worker+0x8b/0x340 [amdgpu]
process_one_work+0x27a/0x540
worker_thread+0x53/0x3e0
kthread+0xeb/0x120
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
-> #0 ((work_completion)(&svm_bo->eviction_work)){+.+.}-{0:0}:
__lock_acquire+0x1426/0x2200
lock_acquire+0xc1/0x2b0
__flush_work+0x80/0x550
__cancel_work_timer+0x109/0x190
svm_range_bo_release+0xdc/0x1c0 [amdgpu]
svm_range_free+0x175/0x180 [amdgpu]
svm_range_deferred_list_work+0x15d/0x340 [amdgpu]
process_one_work+0x27a/0x540
worker_thread+0x53/0x3e0
kthread+0xeb/0x120
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
other info that might help us debug this:
Chain exists of:
(work_completion)(&svm_bo->eviction_work) --> &mm->mmap_lock --> &svms->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&svms->lock);
lock(&mm->mmap_lock);
lock(&svms->lock);
lock((work_completion)(&svm_bo->eviction_work));
I believe this cannot really lead to a deadlock in practice, because
svm_range_evict_svm_bo_worker only takes the mmap_read_lock if the BO
refcount is non-0. That means it's impossible that svm_range_bo_release
is running concurrently. However, there is no good way to annotate this.
To avoid the problem, take a BO reference in
svm_range_schedule_evict_svm_bo instead of in the worker. That way it's
impossible for a BO to get freed while eviction work is pending and the
cancel_work_sync call in svm_range_bo_release can be eliminated.
v2: Use svm_bo_ref_unless_zero and explained why that's safe. Also
removed redundant checks that are already done in
amdkfd_fence_enable_signaling.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
Force max 128KB SLM during WMTP PASS1 Restore.
BSpec: 70202
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20240109055550.679289-1-shekhar.chauhan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Avoid the following lockdep complaint:
<4> [298.856498] ======================================================
<4> [298.856500] WARNING: possible circular locking dependency detected
<4> [298.856503] 6.7.0-rc5-CI_DRM_14017-g58ac4ffc75b6+ #1 Tainted: G
N
<4> [298.856505] ------------------------------------------------------
<4> [298.856507] kworker/4:1H/190 is trying to acquire lock:
<4> [298.856509] ffff8881103e9978 (>->reset.backoff_srcu){++++}-{0:0}, at:
_intel_gt_reset_lock+0x35/0x380 [i915]
<4> [298.856661]
but task is already holding lock:
<4> [298.856663] ffffc900013f7e58
((work_completion)(&(&guc->timestamp.work)->work)){+.+.}-{0:0}, at:
process_scheduled_works+0x264/0x530
<4> [298.856671]
which lock already depends on the new lock.
The complaint is not actually valid. The busyness worker thread does
indeed hold the worker lock and then attempt to acquire the reset lock
(which may have happened in reverse order elsewhere). However, it does
so with a trylock that exits if the reset lock is not available
(specifically to prevent this and other similar deadlocks).
Unfortunately, lockdep does not understand the trylock semantics (the
lock is an i915 specific custom implementation for resets).
Not doing a synchronous flush of the worker thread when a reset is in
progress resolves the lockdep splat by never even attempting to grab
the lock in this particular scenario.
There are situatons where a synchronous cancel is required, however.
So, always do the synchronous cancel if not in reset. And add an extra
synchronous cancel to the end of the reset flow to account for when a
reset is occurring at driver shutdown and the cancel is no longer
synchronous but could lead to unallocated memory accesses if the
worker is not stopped.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219195957.212600-1-John.C.Harrison@Intel.com
|
|
Use kmemdup() helper instead of open-coding to
simplify the code.
Signed-off-by: Chen Haonan <chen.haonan2@zte.com.cn>
Reviewed-by: Yang Guang <yang.guang5@zte.com.cn>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/202401091424115185126@zte.com.cn
|
|
If we are at the end of suspend or very early in resume
its possible an async fence signal (via rcu_call) is triggered
to free_engines which could lead us to the execution of
the context destruction worker (after a prior worker flush).
Thus, when suspending, insert rcu_barriers at the start
of i915_gem_suspend (part of driver's suspend prepare) and
again in i915_gem_suspend_late so that all such cases have
completed and context destruction list isn't missing anything.
In destroyed_worker_func, close the race against CT-loss
by checking that CT is enabled before calling into
deregister_destroyed_contexts.
Based on testing, guc_lrc_desc_unpin may still race and fail
as we traverse the GuC's context-destroy list because the
CT could be disabled right before calling GuC's CT send function.
We've witnessed this race condition once every ~6000-8000
suspend-resume cycles while ensuring workloads that render
something onscreen is continuously started just before
we suspend (and the workload is small enough to complete
and trigger the queued engine/context free-up either very
late in suspend or very early in resume).
In such a case, we need to unroll the entire process because
guc-lrc-unpin takes a gt wakeref which only gets released in
the G2H IRQ reply that never comes through in this corner
case. Without the unroll, the taken wakeref is leaked and will
cascade into a kernel hang later at the tail end of suspend in
this function:
intel_wakeref_wait_for_idle(>->wakeref)
(called by) - intel_gt_pm_wait_for_idle
(called by) - wait_for_suspend
Thus, do an unroll in guc_lrc_desc_unpin and deregister_destroyed_-
contexts if guc_lrc_desc_unpin fails due to CT send falure.
When unrolling, keep the context in the GuC's destroy-list so
it can get picked up on the next destroy worker invocation
(if suspend aborted) or get fully purged as part of a GuC
sanitization (end of suspend) or a reset flow.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231229215143.581619-1-alan.previn.teres.alexis@intel.com
|
|
When suspending, flush the context-guc-id
deregistration worker at the final stages of
intel_gt_suspend_late when we finally call gt_sanitize
that eventually leads down to __uc_sanitize so that
the deregistration worker doesn't fire off later as
we reset the GuC microcontroller.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Mousumi Jana <mousumi.jana@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228045558.536585-2-alan.previn.teres.alexis@intel.com
|
|
RPi 4 uses V3D 4.2, which is currently not supported by the register
definition stated at `v3d_core_reg_defs`. We should be able to support
V3D 4.2, therefore, change the maximum version of the register
definition to 42, not 41.
Fixes: 0ad5bc1ce463 ("drm/v3d: fix up register addresses for V3D 7.x")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109113126.929446-1-mcanal@igalia.com
|
|
To have better compatibility for DP sink, there is a retry mechanism
for the link training process to switch between different training process.
The original driver code doesn't reset the retry counter when training
state is pass. If the system triggers link training over 3 times,
there will be a chance to causes the driver to use the wrong training
method and return a training fail result.
To Fix this, we reset the retry counter when training state is pass
each time.
Signed-off-by: Allen Chen <allen.chen@ite.corp-partner.google.com>
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221093057.7073-1-xiazhengqiao@huaqin.corp-partner.google.com
|
|
The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.
Fixes: d8b52a02cb40 ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-5-thomas.hellstrom@linux.intel.com
|
|
There are a couple of pointers pointing to MMIO space. Annotate them
with __iomem and fix the corresponding sparse warnings.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: 3b0d4a557996 ("drm/xe: Move register MMIO into xe_tile")
Fixes: 399a13323f0d ("drm/xe: add 28-bit address support in struct xe_reg")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Koby Elbaz <kelbaz@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-4-thomas.hellstrom@linux.intel.com
|
|
The pointer points to IO memory, but the __iomem annotation was
incorrectly placed. Annotate it correctly, update its usage accordingly
and fix the corresponding sparse error.
Fixes: 0887a2e7ab62 ("drm/xe: Make xe_mem_region struct")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-3-thomas.hellstrom@linux.intel.com
|
|
The regs pointer points to IO memory. Annotate it properly and
fix the corresponding sparse warning.
Fixes: a4e2f3a299ea ("drm/xe: refactor xe_mmio_probe_tiles to support MMIO extension")
Cc: Koby Elbaz <kelbaz@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109112405.108136-2-thomas.hellstrom@linux.intel.com
|
|
If using the VM_BIND_OP_UNMAP_ALL without any bound vmas for the
vm, we will end up dereferencing an uninitialized variable and leak a
bo lock. Fix this.
v2:
- Updated commit message (Lucas De Marchi)
Reported-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Closes: https://lore.kernel.org/intel-xe/jrwua7ckbiozfcaodx4gg2h4taiuxs53j5zlpf3qzvyhyiyl2d@pbs3plurokrj/
Suggested-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Fixes: b06d47be7c83 ("drm/xe: Port Xe to GPUVA")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222175904.16732-1-thomas.hellstrom@linux.intel.com
|
|
Protect entire IRQ handler by CT being enabled rather than just G2H
handler.
v2: Return on not enabled in CT irq handler (Michal)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
The intent is to return -EWOULDBLOCK to the user if a long running exec
queue is full during the exec IOCTL. -EWOULDBLOCK aliases to -EAGAIN
which results in the exec IOCTL doing a retry loop. Fix this by ensuring
the retry loop is broken when returning -EWOULDBLOCK.
Fixes: 8ae8a2e8dd21 ("drm/xe: Long running job update")
Reported-by: Sai Gowtham Ch <sai.gowtham.ch@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
|
|
Looks possible to switch from CPU binding to GPU binding mid exec, and
if that happens for the same dma-resv we might use two fence slots, once
for the dummy fence, and another for the actual GPU bind.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/698
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
We currently assume that we can upfront know exactly how many fence
slots we will need at the start of the exec, however the TTM bo_validate
can itself consume numerous fence slots, and due to how the
dma_resv_reserve_fences() works it only ensures that at least that many
fence slots are available. With this it is quite possible that TTM
steals some of the fence slots and then when it comes time to do the vma
binding and final exec stage we are lacking enough fence slots, leading
to some nasty BUG_ON(). A simple fix is to reserve our own fences later,
after the validate stage.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/698
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
|
|
Early transport validation is currently incomplete. Due to this disable the
feature by default.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-8-jouni.hogander@intel.com
|
|
Check source and sink support for psr2 early transport and enable
it if not disabled by debug flag.
Bspec: 68934
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-7-jouni.hogander@intel.com
|
|
There is a new register used to configure selective update area size
for early transport.
Configure PIPE_SRCSZ_ERLY_TPT using calculated selective update area
carried in crtc_state->su_area.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-6-jouni.hogander@intel.com
|
|
New register CUR_POS_ERLY_TPT related to early transport is
supposed to be configured when early transport is in use.
This register is used to configure cursor vertical postion
from beginning of selective update area.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-5-jouni.hogander@intel.com
|
|
Su_area is needed when configuring CUR_POS_ERLY_TPT and
PIPE_SRC_SZ_ERLY_TPT. Store it into intel_crtc_state->psr2_su_area.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-4-jouni.hogander@intel.com
|
|
In case early transport is enabled SU area needs to be extended
to cover cursor area fully when cursor is in SU area.
Bspec: 68927
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218175004.52875-3-jouni.hogander@intel.com
|
|
The initialization commands are taken from the STMicroelectronics driver
found at [1].
To ensure backward compatibility, flags have been added to enable gamma
correction setting and display control. In other cases, registers have
been set to their default values according to the specifications found
in the datasheet.
[1] https://github.com/STMicroelectronics/STM32CubeF7/blob/master/Drivers/BSP/Components/nt35510/
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108201618.2798649-9-dario.binacchi@amarulasolutions.com
|
|
This patch, preparatory for future developments, move the hardwired
parameters to configuration data to allow the addition of new
NT35510-based panels.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240108201618.2798649-8-dario.binacchi@amarulasolutions.com
|
|
Use correct helper for getting max DSC bpc supported by the source.
Fixes: 1c56e9a39833 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213091632.431557-3-ankit.k.nautiyal@intel.com
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.8-2024-01-05:
amdgpu:
- VRR fixes
- PSR-SU fixes
- SubVP fixes
- DCN 3.5 fixes
- Documentation updates
- DMCUB fixes
- DML2 fixes
- UMC 12.0 updates
- GPUVM fix
- Misc code cleanups and whitespace cleanups
- DP MST fix
- Let KFD sync with GPUVM fences
- GFX11 reset fix
- SMU 13.0.6 fixes
- VSC fix for DP/eDP
- Navi12 display fix
- RN/CZN system aperture fix
- DCN 2.1 bandwidth validation fix
- DCN INIT cleanup
amdkfd:
- SVM fixes
- Revert TBA/TMA location change
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105220522.4976-1-alexander.deucher@amd.com
|
|
Unlike what is claimed in commit f5aa7d46b0ee ("drm/bridge:
parade-ps8640: Provide wait_hpd_asserted() in struct drm_dp_aux"), if
someone manually tries to do an AUX transfer (like via `i2cdump ${bus}
0x50 i`) while the panel is off we don't just get a simple transfer
error. Instead, the whole ps8640 gets thrown for a loop and goes into
a bad state.
Let's put the function to wait for the HPD (and the magical 50 ms
after first reset) back in when we're doing an AUX transfer. This
shouldn't actually make things much slower (assuming the panel is on)
because we should immediately poll and see the HPD high. Mostly this
is just an extra i2c transfer to the bridge.
Fixes: f5aa7d46b0ee ("drm/bridge: parade-ps8640: Provide wait_hpd_asserted() in struct drm_dp_aux")
Tested-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231221135548.1.I10f326a9305d57ad32cee7f8d9c60518c8be20fb@changeid
|
|
Release all mmap mappings for all vram objects which are associated
with userfault such that, while pcie function in D3hot, any access
to memory mappings will raise a userfault.
Upon userfault, in order to access memory mappings, if graphics
function is in D3 then runtime resume of dgpu will be triggered to
transition to D0.
v2:
- Avoid iomem check before bo migration check as bo can migrate
to system memory (Matthew Auld)
v3:
- Delete bo userfault link during bo destroy
- Upon bo move (vram-smem), do bo userfault link deletion in
xe_bo_move_notify instead of xe_bo_move (Thomas Hellström)
- Grab lock in rpm hook while deleting bo userfault link (Matthew Auld)
v4:
- Add kernel doc and wrap vram_userfault related
stuff in the structure (Matthew Auld)
- Get rpm wakeref before taking dma reserve lock (Matthew Auld)
- In suspend path apply lock for entire list op
including list iteration (Matthew Auld)
v5:
- Use mutex lock instead of spin lock
v6:
- Fix review comments (Matthew Auld)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #For the xe_bo_move_notify() changes
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20240104130702.950078-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Some edp panel requires T10 (Delay from end of valid video data transmitted
by the Source device to power-off) less than 500ms. Using autosuspend with
delay set as 1000 violates this requirement.
Use put_sync_suspend in unprepare to meet the spec. For other cases (such
as getting EDID), it still uses autosuspend.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Fixes: 3235b0f20a0a ("drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepare")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231220221418.2610185-1-hsinyi@chromium.org
|
|
Recommendation is to read FUSE4 register to check if WMTP has been
enabled/disabled by HW. If enabled we don't need to do anything special,
however if disabled recommendation is to also disable the WMTP mode in
the FF_SLICE_CS_CHICKEN2 register, falling back to thread-group and
mid-batch preemption only. However on Linux, the per-context CS_CHICKEN1
is how userspace controls pre-emption, so instead use the default lrc to
disable WMTP using CS_CHICKEN1, if disabled by HW. Userspace is still
free to set CS_CHICKEN1 to whatever they want later.
v2: remove redundant version check and also add descriptive name(Matt)
v3: remove usage of REG_FIELD_GET(Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20240104182615.21327-1-nirmoy.das@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
The function bxt_cdclk_ctl() is responsible for deriving the value for
CDCLK_CTL; use it instead of repeating the same logic.
v2:
- Use a better commit message body by making it more self-contained
and not referring to stuff from the subject line. (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-5-gustavo.sousa@intel.com
|
|
Make the sequence of steps in bxt_sanitize_cdclk() more logical by
grouping things related to the check on the value of CDCLK_CTL into a
single "block". Also, this will make an upcoming change replacing that
block with a single function call easier to follow.
v2:
- Improve body of commit message to be more self-contained.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-4-gustavo.sousa@intel.com
|
|
Extract logic for deriving the value for CDCLK_CTL into bxt_cdclk_ctl().
This makes the code better readable and will be used later in
bxt_sanitize_cdclk().
v2:
- Improve body of commit message to be more self-contained.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-3-gustavo.sousa@intel.com
|
|
With Xe2_LPD, there were changes to the way CDCLK_CTL must be
programmed. Those were reflected on _bxt_set_cdclk() with commit
3d3696c0fed1 ("drm/i915/lnl: Start using CDCLK through PLL"), but
bxt_sanitize_cdclk() was left out.
This was causing some issues when loading the driver with a pre-existing
active display configuration: the driver would mistakenly take the
current value of CDCLK_CTL as wrong and the sanitization would be
triggered.
In a scenario where the display was already configured with a high
CDCLKC and had plane(s) enabled, FIFO underrun errors were reported,
because the current sanitization code selects the minimum possible
CDCLK.
Fix that by updating bxt_sanitize_cdclk() to match the changes made in
_bxt_set_cdclk(). Ideally, we would have a common function to derive the
value for CDCLK_CTL, but that can be done in a future change.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105140538.183553-2-gustavo.sousa@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
|
|
As workarounds for pre-production DG2 were dropped in
commit 707d1b992cfe ("drm/xe/dg2: Drop pre-production workarounds"),
there's no point running the kunit tests for them. Drop
those steppings from kunit.
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231221163213.3849523-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Change kernel-doc "/**" comments to common "/*" comments to prevent
kernel-doc warnings:
gk20a.c:49: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0)
gk20a.c:49: warning: missing initial short description on line:
* cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0)
gk20a.c:62: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* cvb_t_mv =
gk20a.c:62: warning: missing initial short description on line:
* cvb_t_mv =
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231233633.6596-4-rdunlap@infradead.org
|
|
Change kernel-doc "/**" comments to common "/*" comments to prevent
kernel-doc warnings:
gf100.c:1044: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Wait until GR goes idle. GR is considered idle if it is disabled by the
gf100.c:1044: warning: missing initial short description on line:
* Wait until GR goes idle. GR is considered idle if it is disabled by the
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231233633.6596-3-rdunlap@infradead.org
|
|
Change kernel-doc "/**" comments to common "/*" comments to prevent
kernel-doc warnings:
nouveau_ioc32.c:2: warning: Cannot understand * \file mga_ioc32.c
on line 2 - I thought it was a doc line
nouveau_ioc32.c:52: warning: Function parameter or member 'filp' not described in 'nouveau_compat_ioctl'
nouveau_ioc32.c:52: warning: Function parameter or member 'cmd' not described in 'nouveau_compat_ioctl'
nouveau_ioc32.c:52: warning: Function parameter or member 'arg' not described in 'nouveau_compat_ioctl'
nouveau_ioc32.c:52: warning: expecting prototype for Called whenever a 32-bit process running under a 64(). Prototype was for nouveau_compat_ioctl() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231233633.6596-2-rdunlap@infradead.org
|
