summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2024-06-27drm/bridge: analogix_dp: move basic controller init into runtime PMLucas Stach
Make sure the controller is in a basic working state after runtime resume. Keep the analog function enable in the mode set path as this enables parts of the PHY that are only required to be powered when there is a data stream being sent out. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-8-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: move platform and PHY power handling into runtime PMLucas Stach
Platform and PHY power isn't only required when the actual display data stream is active, but may be required earlier to support AUX channel transactions. Move them into the runtime PM calls, so they are properly managed whenever various other parts of the driver need them to be active. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-7-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: remove clk handling from analogix_dp_set_bridgeLucas Stach
The clock is already managed by runtime PM, which is properly invoked from the analogix_dp_set_bridge function, so there is no need for an additional reference. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-6-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: remove unused analogix_dp_removeLucas Stach
Now that the clock is handled dynamically through analogix_dp_resume/suspend and it isn't statically enabled in the driver probe routine, there is no need for the remove function anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-5-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: handle clock via runtime PMLucas Stach
There is no reason to enable the controller clock in driver probe, as there is no HW initialization done in this function. Instead rely on either runtime PM to handle the controller clock or statically enable it in the driver bind routine, after which real hardware access is required to work. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-4-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: register AUX bus after enabling runtime PMLucas Stach
AUX transactions require the controller to be in working state and take a runtime PM reference. To avoid potential races beween the first transactions on the bus and runtime PM being set up, move the AUX registration behind the runtime PM setup. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-3-l.stach@pengutronix.de
2024-06-27drm/rockchip: analogix_dp: add runtime PM handlingLucas Stach
Hook up the runtime PM suspend/resume paths to make the rockchip glue behave more like the exynos one. The same suspend/resume functions are used for system sleep via the runtime PM force suspend/resume. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-2-l.stach@pengutronix.de
2024-06-27drm/bridge: analogix_dp: remove unused platform power_on_end callbackLucas Stach
This isn't used, but gives the impression of the power on and power off platform calls being non-symmetrical. Remove the unused callback and rename the power_on_start to simply power_on. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Robert Foss <rfoss@kernel.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-1-l.stach@pengutronix.de
2024-06-27drm/panic: Restrict graphical logo handling to built-inGeert Uytterhoeven
When CONFIG_DRM_PANIC=y, but CONFIG_DRM=m: ld: drivers/gpu/drm/drm_panic.o: in function `drm_panic_setup_logo': drivers/gpu/drm/drm_panic.c:99: multiple definition of `init_module'; drivers/gpu/drm/drm_drv.o:drivers/gpu/drm/drm_drv.c:1079: first defined here Fix this by restricting the graphical logo handling and its device_initcall() to the built-in case. Logos are freed during late kernel initialization, so they are no longer available at module load time anyway. Fixes: 294bbd1f2697 ("drm/panic: Add support for drawing a monochrome graphical logo") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406261341.GYsbLpN1-lkp@intel.com/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/4009fca99a7c05f617cc9899c6d0a5748415595d.1719391132.git.geert+renesas@glider.be
2024-06-27drm/panic: Do not select DRM_KMS_HELPERGeert Uytterhoeven
DRM core code cannot call into DRM helper code, as this would lead to circular references in the modular case. Hence drop the selection of DRM_KMS_HELPER. It was unused anyway, as v10 switched from using the DRM format helpers to its own color format conversion, cfr. commit 9544309775c3 ("drm/panic: Add support for color format conversion"). Remove the unneeded include of <drm/drm_format_helper.h>. Fixes: bf9fb17c6672 ("drm/panic: Add a drm panic handler") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/60155f8c939ed286e324a7c12a1daa69fe49fcf6.1719391132.git.geert+renesas@glider.be
2024-06-27Revert "drm/bridge: tc358767: Set default CLRSIPO count"Marek Vasut
This reverts commit 01338bb82fed40a6a234c2b36a92367c8671adf0. With clock improvements in place, this seems to be no longer necessary. Set the CLRSIPO to default setting recommended by manufacturer. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-5-marex@denx.de
2024-06-27drm/bridge: tc358767: Set LSCLK divider for SYSCLK to 1Marek Vasut
The only information in the datasheet regarding this divider is a note in SYS_PLLPARAM register documentation which states that when LSCLK is 270 MHz, LSCLK_DIV should be 1. What should LSCLK_DIV be set to when LSCLK is 162 MHz (for DP 1.62G mode) is unclear, but empirical test confirms using LSCLK_DIV 1 has no adverse effects either. In the worst case, the internal TC358767 clock would run faster. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-4-marex@denx.de
2024-06-27drm/bridge: tc358767: Drop line_pixel_subtractMarek Vasut
This line_pixel_subtract is no longer needed now that the bridge can request and obtain specific pixel clock on input to the bridge, with clock frequency that matches the Pixel PLL frequency. The line_pixel_subtract is now always 0, so drop it entirely. The line_pixel_subtract was not reliable as it never worked when the Pixel PLL and input clock were off just so that the required amount of pixels to subtract would not be whole integer. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-3-marex@denx.de
2024-06-27drm/bridge: tc358767: Use tc_pxl_pll_calc() to correct adjusted_mode clockMarek Vasut
Use tc_pxl_pll_calc() to find out the exact clock frequency generated by the Pixel PLL. Use the Pixel PLL frequency as adjusted_mode clock frequency and pass it down the display pipeline to obtain exactly this frequency on input into this bridge. The precise input frequency that matches the Pixel PLL frequency is important for this bridge, as if the frequencies do not match, the bridge does suffer VFIFO overruns or underruns. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-2-marex@denx.de
2024-06-27drm/bridge: tc358767: Split tc_pxl_pll_en() into parameter calculation and ↵Marek Vasut
enablement Split tc_pxl_pll_en() into tc_pxl_pll_calc() which does only Pixel PLL parameter calculation and tc_pxl_pll_en() which calls tc_pxl_pll_calc() and then configures the Pixel PLL register. This is a preparatory patch for further rework, where tc_pxl_pll_calc() will also be used to find out the exact clock frequency generated by the Pixel PLL. This frequency will be used as adjusted_mode clock frequency and passed down the display pipeline to obtain exactly this frequency on input into this bridge. The precise input frequency that matches the Pixel PLL frequency is important for this bridge, as if the frequencies do not match, the bridge does suffer VFIFO overruns or underruns. Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240625120334.145320-1-marex@denx.de
2024-06-27drm/ast: Inline drm_simple_encoder_init()Thomas Zimmermann
The function drm_simple_encoder_init() is a trivial helper and deprecated. Replace it with the regular call to drm_encoder_init(). Resolves the dependency on drm_simple_kms_helper.h. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625131815.14514-1-tzimmermann@suse.de
2024-06-27Merge tag 'amd-drm-fixes-6.10-2024-06-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.10-2024-06-26: amdgpu: - SMU 14.x fix - vram info parsing fix - mode1 reset fix - LTTPR fix - Virtual display fix - Avoid spurious error in PSP init Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240626221408.2019633-1-alexander.deucher@amd.com
2024-06-27Merge tag 'drm-misc-fixes-2024-06-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.10-rc6: - nouveau tv mode fixes. - Add KOE TX26D202VM0BWA timings. - Fix fb_info when vmalloc is used, regression from CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2e596c1e-9389-43c2-a029-06fe741c44c3@linux.intel.com
2024-06-27Merge tag 'drm-intel-gt-next-2024-06-12' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next UAPI Changes: - Support replaying GPU hangs with captured context image (Tvrtko Ursulin) Driver Changes: Fixes/improvements/new stuff: - Automate CCS Mode setting during engine resets [gt] (Andi Shyti) - Revert "drm/i915: Remove extra multi-gt pm-references" (Janusz Krzysztofik) - Fix HAS_REGION() usage in intel_gt_probe_lmem() (Ville Syrjälä) - Disarm breadcrumbs if engines are already idle [gt] (Chris Wilson) - Shadow default engine context image in the context (Tvrtko Ursulin) - Support replaying GPU hangs with captured context image (Tvrtko Ursulin) - avoid FIELD_PREP warning [guc] (Arnd Bergmann) - Fix CCS id's calculation for CCS mode setting [gt] (Andi Shyti) - Increase FLR timeout from 3s to 9s (Andi Shyti) - Update workaround 14018575942 [mtl] (Angus Chen) Future platform enablement: - Enable w/a 16021333562 for DG2, MTL and ARL [guc] (John Harrison) Miscellaneous: - Pass the region ID rather than a bitmask to HAS_REGION() (Ville Syrjälä) - Remove counter productive REGION_* wrappers (Ville Syrjälä) - Fix typo [gem/i915_gem_ttm_move] (Deming Wang) - Delete the live_hearbeat_fast selftest [gt] (Krzysztof Niemiec) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zmmazub+U9ewH9ts@linux
2024-06-27Merge tag 'amd-drm-next-6.11-2024-06-22' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.11-2024-06-22: amdgpu: - HPD fixes - PSR fixes - DCC updates - DCN 4.0.1 fixes - FAMS fixes - Misc code cleanups - SR-IOV fixes - GPUVM TLB flush cleanups - Make VCN less verbose - ACPI backlight fixes - MES fixes - Firmware loading cleanups - Replay fixes - LTTPR fixes - Trap handler fixes - Cursor and overlay fixes - Primary plane zpos fixes - DML 2.1 fixes - RAS updates - USB4 fixes - MALL fixes - Reserved VMID fix - Silence UBSAN warnings amdkfd: - Misc code cleanups From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240622152523.2267072-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-06-26drm/xe/oa/uapi: Allow preemption to be disabled on the stream exec queueAshutosh Dixit
Mesa VK_KHR_performance_query use case requires preemption and timeslicing to be disabled for the stream exec queue. Implement this functionality here. v2: Minor change to debug print to print both ret values (Umesh) Acked-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240626181817.1516229-3-ashutosh.dixit@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/oa: Allow stream enable/disable functions to return errorAshutosh Dixit
Stream enable/disable functions previously had void return because failure during function execution was not possible. This will change when we introduce functionality to disable preemption on the stream exec queue. Therefore, in preparation for this functionality, prepare this code to be able to handle error returns. Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240626181817.1516229-2-ashutosh.dixit@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/pf: Disable VFs on removeMichal Wajdeczko
We shouldn't leave VFs enabled when unloading the PF driver. Otherwise we will get a message like: [ ] xe 0000:4d:00.0: driver left SR-IOV enabled after remove Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240626111827.1389-2-michal.wajdeczko@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/irq: remove xe_irq_shutdownIlia Levi
The cleanup is done by devres in irq_uninstall. Commit bbc9651fe9f4 ("drm/xe/irq: move irq_uninstall over to devm") resolved the ordering issue where irq_uninstall (registered with drmm) was called after pci_free_irq_vectors (registered with devm upon calling pci_alloc_irq_vectors). This happened because drmm action list is registered with devm very early in the init flow - before pci_alloc_irq_vectors. Now that irq_uninstall is registered with devm, it will be called before pci_free_irq_vectors and we can remove xe_irq_shutdown. Signed-off-by: Ilia Levi <illevi@habana.ai> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240606124705.822451-1-illevi@habana.ai Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/pf: Trigger explicit FLR while disabling VFsMichal Wajdeczko
We attempt to unprovision all VFs GuC when disabling them, but GuC may reject such request if the target VF was previously active but VF driver didn't unload with explicit VF reset H2G action or the VMM has not started the VF FLR. To avoid mismatches between configs maintained the PF and GuC, trigger an explicit FLR sequences just before releasing resources. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625194546.1301-2-michal.wajdeczko@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/guc: Print GuC error codes as hex valueMichal Wajdeczko
We maintain GuC error code values in hex format. Also print them in that format for easier matching. While at it, slightly reformat the log and add missing \n. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-4-michal.wajdeczko@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/guc: Add more GuC error codes to ABIMichal Wajdeczko
There are many more error codes used that the GuC firmware can return in the RESPONSE_FAILURE message. Add to the ABI header those which are more likely to be seen by the PF or VF drivers. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-3-michal.wajdeczko@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/guc: Demote the H2G retry log message to debugMichal Wajdeczko
The G2H RETRY message sent by the GuC does not necessary indicate any serious problem and can be a part of the normal communication flow. Switch the log level from warning to more appropriate debug. This will also let the CI ignore these logs which were seen in few SR-IOV scenarios. While at it, use hex to print the reason and add missing \n. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625141258.1257-2-michal.wajdeczko@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/vf: Skip attempt to start GuC PC if VFMichal Wajdeczko
We have already marked the GuC PC feature as not applicable for VF devices, but we missed the fact that there may be still some privileged activities performed by this component, who does much more than its name suggests. Explicitly skip xe_guc_pc_start() if running as a VF driver and use a GT oriented message to report any error. v2: also skip xe_guc_pc_stop (Vinay) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240622094253.1081-1-michal.wajdeczko@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/oa: Fix kernel doc in xe_drm.hAshutosh Dixit
Fix kernel doc in xe_drm.h. Also eliminate private/non-abi enum definitions. v2: Remove __DRM_XE_PERF_TYPE_MAX since it is unused (Michal) v3: Also remove DRM_XE_OA_PROPERTY_MAX since it can also be eliminated (Michal) Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240623203119.3840283-1-ashutosh.dixit@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/huc: Use GT oriented error messages in xe_huc.cMichal Wajdeczko
If applicable, we prefer GT oriented dmesg messages. Update all HuC related messages and use more user friendly error codes. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240621172522.1037-1-michal.wajdeczko@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/guc: Request max GT freq during resumeVinay Belgaumkar
We already request max freq in the load path, moving it to __xe_guc_upload will ensure this speeds up GuC load in the resume path as well. v2: Rename xe_guc_pc_init_early since we now call it per GuC load (Michal W) v3: Keep pc_init_early() and init RPx values there (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-3-vinay.belgaumkar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/xe/lnl: Apply Wa_22019338487Vinay Belgaumkar
This WA requires us to limit media GT frequency requests to a certain cap value during driver load. Freq limits are restored after load completes, so perf will not be affected during normal operations. During normal driver operation, this WA requires dummy writes to media offset 0x380D8C after every ~63 GGTT writes. This will ensure completion of the LMEM writes originating from Gunit. During driver unload(before FLR), the WA requires that we set requested frequency to the cap value again. v3: Do not use WA number in function name. Call WA wrapper from xe_device. Rename some variables, check for locks in the correct function (Rodrigo). Ensure reset path is also covered for this WA. v4: Fix BAT failure v5: Add a function pointer for ggtt_ops (Michal W) v6: Fix name collision and use static function (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26Merge drm/drm-next into drm-xe-nextRodrigo Vivi
Need to sync some header include that propagated through drm-intel-next. v2: After some changes in drm/drm-next Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-26drm/panel: add Ilitek ILI9806E panel driverMichael Walle
The Ortustech COM35H3P70ULC panel is based on the ILI9806E DSI display controller. Co-developed-by: Gunnar Dibbern <gunnar.dibbern@lht.dlh.de> Signed-off-by: Gunnar Dibbern <gunnar.dibbern@lht.dlh.de> Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626144433.3097793-3-mwalle@kernel.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626144433.3097793-3-mwalle@kernel.org
2024-06-26drm/panel: add lincolntech lcd197 supportJerome Brunet
Add support for the Lincoln Technologies LCD197 1080x1920 DSI panel. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20240626142212.1341556-4-jbrunet@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626142212.1341556-4-jbrunet@baylibre.com
2024-06-26drm/panel: sitronix-st7703: transition to mipi_dsi wrapped functionsTejas Vipin
Use functions introduced in commit 966e397e4f60 ("drm/mipi-dsi: Introduce mipi_dsi_*_write_seq_multi()") and commit f79d6d28d8fe ("drm/mipi-dsi: wrap more functions for streamline handling") for sitronix-st7703 based panels. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240626045244.48858-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240626045244.48858-1-tejasvipin76@gmail.com
2024-06-26gpu: ipu-v3: pre: don't use fixed timeout when waiting for safe windowLucas Stach
The timeout when waiting for the PRE safe window is rather short, as normally we would only need to wait a few dozen usecs for the problematic scanline region to pass and we don't want to spin too long in case something goes wrong. This however mixes badly with preemption, as we can easily get scheduled away from the CPU for a longer time than our timeout, in which case we would hit a spurious timeout and wrongly skip the PRE update. Instead of disabling preemption across the wait loop, potentially impacting the overall system latency, use a wait loop with a fixed max number of iterations, so time spent away from the CPU is not accounted against the timeout budget. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20240517104549.3648939-3-l.stach@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240517104549.3648939-3-l.stach@pengutronix.de
2024-06-26gpu: ipu-v3: pre: add dynamic buffer layout reconfigurationLucas Stach
imx-drm doesn't mandate a modeset when the framebuffer modifier changes, but currently the tile prefetch and resolve (TPR) configuration of the PRE is only set up on the initial modeset. As the TPR configuration is double buffered, same as all the other PRE states, we can support dynamic reconfiguration of the buffer layout from one frame to another. As switching between (super-)tiled and linear prefetch needs to touch the CTRL register make sure to do the reconfiguration inside the safe window. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20240517104549.3648939-2-l.stach@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240517104549.3648939-2-l.stach@pengutronix.de
2024-06-26gpu: ipu-v3: pre: move state into structLucas Stach
Move the variables tracking the current dynamic state into a struct to separate it a bit better from the static device properties. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20240517104549.3648939-1-l.stach@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240517104549.3648939-1-l.stach@pengutronix.de
2024-06-26gpu: ipu-v3: pre: replace of_node_put() with __freeR Sundar
use the new cleanup magic to replace of_node_put() with __free(device_node) marking to auto release when they get out of scope. Suggested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: R Sundar <prosunofficial@gmail.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20240427045024.7083-1-prosunofficial@gmail.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240427045024.7083-1-prosunofficial@gmail.com
2024-06-26drm/etnaviv: don't block scheduler when GPU is still activeLucas Stach
Since 45ecaea73883 ("drm/sched: Partial revert of 'drm/sched: Keep s_fence->parent pointer'") still active jobs aren't put back in the pending list on drm_sched_start(), as they don't have a active parent fence anymore, so if the GPU is still working and the timeout is extended, all currently active jobs will be freed. To avoid prematurely freeing jobs that are still active on the GPU, don't block the scheduler until we are fully committed to actually reset the GPU. As the current job is already removed from the pending list and will not be put back when drm_sched_start() isn't called, we must make sure to put the job back on the pending list when extending the timeout. Cc: stable@vger.kernel.org #6.0 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2024-06-26drm/etnaviv: reduce number of ktime_get calls in IRQ handlerLucas Stach
A single IRQ might signal the completion of multiple jobs/fences at once. There is no point in attaching a new timestamp to each fence that only differs in when exactly the IRQ handler was able to process this fence. Get a single timestamp when the IRQ handler has determined that there are completed jobs and reuse this for all fences that get signalled by the handler. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2024-06-26drm/qxl: Add check for drm_cvt_modeChen Ni
Add check for the return value of drm_cvt_mode() and return the error if it fails in order to avoid NULL pointer dereference. Fixes: 1b043677d4be ("drm/qxl: add qxl_add_mode helper function") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Heng Qi <hengqi@linux.alibaba.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621071031.1987974-1-nichen@iscas.ac.cn
2024-06-26drm/etnaviv: fix DMA direction handling for cached RW buffersLucas Stach
The dma sync operation needs to be done with DMA_BIDIRECTIONAL when the BO is prepared for both read and write operations. Fixes: a8c21a5451d8 ("drm/etnaviv: add initial etnaviv DRM driver") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
2024-06-26drm/etnaviv: switch devcoredump allocations to GFP_NOWAITLucas Stach
The etnaviv devcoredump is created in the GPU reset path, which must make forward progress to avoid stalling memory reclaim on unsignalled dma fences. The currently used __GFP_NORETRY does not prohibit sleeping on direct reclaim, breaking the forward progress guarantee. Switch to GFP_NOWAIT, which allows background reclaim to be triggered, but avoids any stalls waiting for direct reclaim. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-06-26drm/mediatek: Fix bit depth overwritten for mtk_ovl_set bit_depth()Jason-JH.Lin
Refine the value and mask define of bit depth for mtk_ovl_set bit_depth(). Use cmdq_pkt_write_mask() instead of cmdq_pkt_write() to avoid bit depth settings being overwritten. Fixes: fb36c5020c9c ("drm/mediatek: Add support for AR30 and BA30 overlays") Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240624095726.18818-1-jason-jh.lin@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2024-06-26drm/i915/display: For MTL+ platforms skip mg dp programmingImre Deak
For MTL+ platforms we use PICA chips for Type-C support and hence mg programming is not needed. Fixes issue with drm warn of TC port not being in legacy mode. Cc: stable@vger.kernel.org Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625111840.597574-1-mika.kahola@intel.com
2024-06-26drm/mediatek: select DRM_GEM_DMA_HELPER if DRM_FBDEV_EMULATION=yChen-Yu Tsai
With the recent switch from fbdev-generic to fbdev-dma, the driver now requires the DRM GEM DMA helpers. This dependency is missing, and will cause a link failure if fbdev emulation is enabled. Add the missing dependency. Fixes: 0992284b4fe4 ("drm/mediatek: Use fbdev-dma") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Chun-Kuang Hu <chunkuang.hu@mediatek.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240620054708.2230665-1-wenst@chromium.org
2024-06-25drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modesMa Ke
In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. Cc: stable@vger.kernel.org Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625081828.2620794-1-make24@iscas.ac.cn
generated by cgit v1.3 (git 2.53.0) at 2026-11-10 17:20:37 +0000